On certain architectures we can support efficient vectorized version of
instructions if the operand value is uniform (splat) or a constant scalar.
An example of this is a vector shift on x86.
We can efficiently support
for (i = 0 ; i < ; i += 4)
w[0:3] = v[0:3] << <2, 2, 2, 2>
but not
for (i = 0; i < ; i += 4)
w[0:3] = v[0:3] << x[0:3]
This patch adds a parameter to getArithmeticInstrCost to further qualify operand
values as uniform or uniform constant.
Targets can then choose to return a different cost for instructions with such
operand values.
A follow-up commit will test this feature on x86.
radar://13576547
llvm-svn: 178807
There is a difference for FORM_ref_addr between DWARF 2 and DWARF 3+.
Since Eric is against guarding DWARF 2 ref_addr with DarwinGDBCompat, we are
still in discussion on how to handle this.
The correct solution is to update our header to say version 4 instead of version
2 and update tool chains as well.
rdar://problem/13559431
llvm-svn: 178806
the target system.
It was hard-coded to 4 bytes before. I can't get llvm to generate a
ref_addr on a reasonably sized testing case.
rdar://problem/13559431
llvm-svn: 178722
For this we need to use a libcall. Previously LLVM didn't implement
libcall support for frem, so I've added it in the usual
straightforward manner. A test case from the bug report is included.
llvm-svn: 178639
The new instruction scheduling models provide information about the
number of cycles consumed on each processor resource. This makes it
possible to estimate ILP more accurately than simply counting
instructions / issue width.
The functions getResourceDepth() and getResourceLength() now identify
the limiting processor resource, and return a cycle count based on that.
This gives more precise resource information, particularly in traces
that use one resource a lot more than others.
llvm-svn: 178553
This is helps on architectures where i8,i16 are not legal but we have byte, and
short loads/stores. Allowing us to merge copies like the one below on ARM.
copy(char *a, char *b, int n) {
do {
int t0 = a[0];
int t1 = a[1];
b[0] = t0;
b[1] = t1;
radar://13536387
llvm-svn: 178546
We would also like to merge sequences that involve a variable index like in the
example below.
int index = *idx++
int i0 = c[index+0];
int i1 = c[index+1];
b[0] = i0;
b[1] = i1;
By extending the parsing of the base pointer to handle dags that contain a
base, index, and offset we can handle examples like the one above.
The dag for the code above will look something like:
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i8 load %index))))
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i32 add (i32 signextend (i8 load %index))
(i32 1)))))
The code that parses the tree ignores the intermediate sign extensions. However,
if there is a sign extension it needs to be on all indexes.
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (add (i8 load %index)
(i8 1))))
vs
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i32 add (i32 signextend (i8 load %index))
(i32 1)))))
radar://13536387
llvm-svn: 178483
immediate in a register. I don't believe this should ever fail, but I see no
harm in trying to make this code bullet proof.
I've added an assert to ensure my assumtion is correct. If the assertion fires
something is wrong and we should fix it, rather then just silently fall back to
SelectionDAG isel.
llvm-svn: 178305
This is a follow-up to r178073 (which should actually make target-customized
spilling work again).
I still don't have a regression test for this (but it would be good to have
one; Thumb 1 and Mips16 use this callback as well).
Patch by Richard Sandiford.
llvm-svn: 178137
As pointed out by Richard Sandiford, my recent updates to the register
scavenger broke targets that use custom spilling (because the new code assumed
that if there were no valid spill slots, than spilling would be impossible).
I don't have a test case, but it should be possible to create one for Thumb 1,
Mips 16, etc.
llvm-svn: 178073
The previous algorithm could not deal properly with scavenging multiple virtual
registers because it kept only one live virtual -> physical mapping (and
iterated through operands in order). Now we don't maintain a current mapping,
but rather use replaceRegWith to completely remove the virtual register as
soon as the mapping is established.
In order to allow the register scavenger to return a physical register killed
by an instruction for definition by that same instruction, we now call
RS->forward(I) prior to eliminating virtual registers defined in I. This
requires a minor update to forward to ignore virtual registers.
These new features will be tested in forthcoming commits.
llvm-svn: 178058
- Handle the case where the result of 'insert_subvect' is bitcasted
before 'extract_subvec'. This removes the redundant insertf128/extractf128
pair on unaligned 256-bit vector load/store on vectors of non 64-bit integer.
llvm-svn: 177945
For instance, following transformation will be disabled:
x + x + x => 3.0f * x;
The problem of these transformations is that it introduces a FP constant, which
following Instruction-Selection pass cannot handle.
Reviewed by Nadav, thanks a lot!
rdar://13445387
llvm-svn: 177933
Performing this check unilaterally prevented us from generating FMAs when the incoming IR contained illegal vector types which would eventually be legalized to underlying types that *did* support FMA.
For example, an @llvm.fmuladd on an OpenCL float16 should become a sequence of float4 FMAs, not float4 fmul+fadd's.
NOTE: Because we still call the target-specific profitability hook, individual targets can reinstate the old behavior, if desired, by simply performing the legality check inside their callback hook. They can also perform more sophisticated legality checks, if, for example, some illegal vector types can be productively implemented as FMAs, but not others.
llvm-svn: 177820
177774 broke the lld-x86_64-darwin11 builder; error:
error: comparison of integers of different signs: 'int' and 'size_type' (aka 'unsigned long')
for (SI = 0; SI < Scavenged.size(); ++SI)
~~ ^ ~~~~~~~~~~~~~~~~
Fix this by making SI also unsigned.
llvm-svn: 177780
This patch lets the register scavenger make use of multiple spill slots in
order to guarantee that it will be able to provide multiple registers
simultaneously.
To support this, the RS's API has changed slightly: setScavengingFrameIndex /
getScavengingFrameIndex have been replaced by addScavengingFrameIndex /
isScavengingFrameIndex / getScavengingFrameIndices.
In forthcoming commits, the PowerPC backend will use this capability in order
to implement the spilling of condition registers, and some special-purpose
registers, without relying on r0 being reserved. In some cases, spilling these
registers requires two GPRs: one for addressing and one to hold the value being
transferred.
llvm-svn: 177774
This reverts commit 06091513c283c863296f01cc7c2e86b56bb50d02.
The code is obviously wrong, but the trivial fix causes
inefficient code generation on X86. Somebody with more
knowledge of the code needs to take a look here.
Signed-off-by: Christian König <christian.koenig@amd.com>
llvm-svn: 177529
A node's ordering is only propagated during legalization if (a) the new node does
not have an ordering (is not a CSE'd node), or (b) the new node has an ordering
that is higher than the node being legalized.
llvm-svn: 177465
The linker sorts the .tls$<xyz> sections by name, and we need
to make sure any extra sections we produce (e.g. for weak globals)
always end up between .tls$AAA and .tls$ZZZ, even if the name
starts with e.g. an underscore.
Patch by David Nadlinger!
llvm-svn: 177256
Implicit defs are not currently positional and not modeled by the
per-operand machine model. Unfortunately, we treat defs that are part
of the architectural instruction description, like flags, the same as
other implicit defs. Really, they should have a fixed MachineInstr
layout and probably shouldn't be "implicit" at all.
For now, we'll change the default latency to be the max operand
latency. That will give flag setting operands full latency for x86
folded loads. Other kinds of "fake" implicit defs don't occur prior to
regalloc anyway, and we would like them to go away postRegAlloc as
well.
llvm-svn: 177227
This is a generic function (derived from PEI); moving it into
MachineFrameInfo eliminates a current redundancy between the ARM and AArch64
backends, and will allow it to be used by the PowerPC target code.
No functionality change intended.
llvm-svn: 177111
Add the current PEI register scavenger as a parameter to the
processFunctionBeforeFrameFinalized callback.
This change is necessary in order to allow the PowerPC target code to
set the register scavenger frame index after the save-area offset
adjustments performed by processFunctionBeforeFrameFinalized. Only
after these adjustments have been made is it possible to estimate
the size of the stack frame.
llvm-svn: 177108
This doesn't reset all of the target options within the TargetOptions
object. This is because some of those are ABI-specific and must be determined if
it's okay to change those on the fly.
llvm-svn: 176986
belongs to a different compile unit.
DW_FORM_ref_addr should be used for cross compile-unit reference.
When compiling a large application, we got a dwarfdump verification error where
abstract_origin points to nowhere.
This error can't be reproduced on any testing case in MultiSource.
We may have other cases where we use DW_FORM_ref4 unconditionally.
rdar://problem/13370501
llvm-svn: 176882
Versioned debug info support has been a burden to maintain & also compromised
current debug info verification by causing test cases testing old debug info to
remain rather than being updated to the latest. It also makes it hard to add or
change the metadata schema by requiring various backwards-compatibility in the
DI* hierarchy.
So it's being removed in preparation for new changes to the schema to tidy up
old/unnecessary fields and add new fields needed for new debug info (well, new
to LLVM at least).
The more surprising part of this is the changes to DI*::Verify - this became
necessary due to the changes to AsmWriter. AsmWriter was relying on the version
test to decide which bits of metadata were actually debug info when printing
the comment annotations. Without the version information the tag numbers were
too common & it would print debug info on random metadata that happened to
start with an integer that matched a tag number. Instead this change makes the
Verify functions more precise (just adding "number of operands" checks - not
type checking those operands yet) & relies on that to decide which metadata is
debug info metadata.
llvm-svn: 176838
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
llvm-svn: 176733
LegalizeDAG.cpp uses the value of the comparison operands when checking
the legality of BR_CC, so DAGCombiner should do the same.
v2:
- Expand more BR_CC value types for NVPTX
v3:
- Expand correct BR_CC value types for Hexagon, Mips, and XCore.
llvm-svn: 176694
This verifies live intervals both before and after scheduling. It's
useful for anyone hacking on live interval update.
Note that we don't yet pass verification all the time. We don't yet
handle updating nonallocatable live intervals perfectly.
llvm-svn: 176685
Code generation makes some basic assumptions about the IR it's been given. In
particular, if there is only one 'invoke' in the function, then that invoke
won't be going away. However, with the advent of the `llvm.donothing' intrinsic,
those invokes may go away. If all of them go away, the landing pad no longer has
any users. This confuses the back-end, which asserts.
This happens with SjLj exceptions, because that's the model that modifies the IR
based on there being invokes, etc. in the function.
Remove any invokes of `llvm.donothing' during SjLj EH preparation. This will
give us a CFG that the back-end won't be confused about. If all of the invokes
in a function are removed, then the SjLj EH prepare pass won't insert the bogus
code the relies upon the invokes being there.
<rdar://problem/13228754&13316637>
llvm-svn: 176677
In very rare cases caused by irreducible control flow, the dominating
block can have the same trace head without actually being part of the
trace.
As long as such a dominator still has valid instruction depths, it is OK
to use it for computing instruction depths.
Rename the function to avoid lying, and add a check that instruction
depths are computed for the dominator.
llvm-svn: 176668
rdar:13370002 [pre-RA-sched] assertion: released too many times
I tracked this down to an earlier hack that is no longer applicable
and interfered with normal scheduler logic. With the changes in
r176037, it was causing an instruction to be scheduled multiple times.
I have an external test case that I tried hard to reduce and
failed. I can't even reproduce with llc.
llvm-svn: 176636
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
llvm-svn: 176605
- ISD::SHL/SRL/SRA must have either both scalar or both vector operands
but TLI.getShiftAmountTy() so far only return scalar type. As a
result, backend logic assuming that breaks.
- Rename the original TLI.getShiftAmountTy() to
TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to
return target-specificed scalar type or the same vector type as the
1st operand.
- Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar
type.
llvm-svn: 176364
We avoided computing DAG height/depth during Node printing because it
shouldn't depend on an otherwise valid DAG. But this has become far
too annoying for the common case of a valid DAG where we want to see
valid values. If doing the computation on-the-fly turns out to be a
problem in practice, then I'll add a mode to the diagnostics to only
force it when we're likely to have a valid DAG, otherwise explicitly
print INVALID instead of bogus numbers. For now, just go for it all
the time.
llvm-svn: 176314
SelectionDAGIsel::LowerArguments needs a function, not a basic block. So it
makes sense to pass it the function instead of extracting a basic-block from
the function and then tossing it. This is also more self-documenting (functions
have arguments, BBs don't).
In addition, added comments to a couple of Select* methods.
llvm-svn: 176305
We make the cost for calling libm functions extremely high as emitting the
calls is expensive and causes spills (on x86) so performance suffers. We still
vectorize important calls like ceilf and friends on SSE4.1. and fabs.
Differential Revision: http://llvm-reviews.chandlerc.com/D466
llvm-svn: 176287
definition DIE (TAG_variable), and put AT_MIPS_linkage_name to TAG_member when
DarwinGDBCompat is true.
Darwin GDB needs AT_MIPS_linkage_name at both places to work.
Follow-up patch to r176143.
rdar://problem/13291234
llvm-svn: 176220
definition DIE, to make old GDB happy.
We have a regression for old GDB when Clang uses DW_TAG_member to declare
static members inside a class, instead of DW_TAG_variable. This patch will fix
this regression.
rdar://problem/13291234
llvm-svn: 176143
TAG_member inside a class to the specification DIE.
Having AT_MIPS_linkage_name on TAG_member caused old gdb (GNU 6.3.50) to
error out. Also gcc 4.7 has AT_MIPS_linkage_name on the specification DIE.
rdar://problem/13291234
llvm-svn: 176120
fewer scalar integer (i32 or i64) arguments. It completely eliminates the need
for SDISel for trivial functions.
Also, add the new llc -fast-isel-abort-args option, which is similar to
-fast-isel-abort option, but for formal argument lowering.
llvm-svn: 176052
memory intrinsics in the SDAG builder.
When alignment is zero, the lang ref says that *no* alignment
assumptions can be made. This is the exact opposite of the internal API
contracts of the DAG where alignment 0 indicates that the alignment can
be made to be anything desired.
There is another, more explicit alignment that is better suited for the
role of "no alignment at all": an alignment of 1. Map the intrinsic
alignment to this early so that we don't end up generating aligned DAGs.
It is really terrifying that we've never seen this before, but we
suddenly started generating a large number of alignment 0 memcpys due to
the new code to do memcpy-based copying of POD class members. That patch
contains a bug that rounds bitfield alignments down when they are the
first field. This can in turn produce zero alignments.
This fixes weird crashes I've seen in library users of LLVM on 32-bit
hosts, etc.
llvm-svn: 176022
itself recursively with a new instruction that has not been finalized, in order
to determine whether to keep the instruction. On 'make check' and test-suite the
only cases where the recursive invocation made any transformations were simple
instruction commutations, so I am restricting the recursive invocation to do
only this.
The other cases wouldn't work correctly when updating LiveIntervals, since the
new instructions don't have slot indices and LiveIntervals hasn't yet been
updated. If the other transformations were actually triggering in any test case
it would be possible to support it with a lot of effort, but since they don't
it's not worth it.
llvm-svn: 175979
unless it was requested to with an optional parameter that defaults to false, so
we don't need to handle that case in TwoAddressInstructionPass.
llvm-svn: 175974
TwoAddressInstructionPass. The code in rescheduleMIBelowKill() is a bit tricky,
since multiple instructions need to be moved down, one-at-a-time, in reverse
order.
llvm-svn: 175955
One of the phases of SelectionDAG is LegalizeVectors. We don't need to sort the DAG and copy nodes around if there are no vector ops.
Speeds up the compilation time of SelectionDAG on a big scalar workload by ~8%.
llvm-svn: 175929
It was incorrectly checking a Function* being an IntrinsicInst* which
isn't possible. It should always have been checking the CallInst* instead.
Added test case for x86 which ensures we only get one constant load.
It was 2 before this change.
rdar://problem/13267920
llvm-svn: 175853
pass. One of the callers of isKilled() can cope with overapproximation of kills
and the other can't, so I added a flag to indicate this.
In theory this could pessimize code slightly, but in practice most physical
register uses are kills, and most important kills of physical registers are the
only uses of that register prior to register allocation, so we can recognize
them as kills even without kill flags.
This is relevant because LiveIntervals gets rid of all kill flags.
llvm-svn: 175821
to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.
There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.
The refactoring was OK'd by Anton Korobeynikov on llvmdev.
Note: this touches the target interfaces, so out-of-tree targets may
be affected.
llvm-svn: 175788
This fixes some problems with too conservative checking where we were
marking all aliases of a register as used, and then also checking all
aliases when allocating a register.
<rdar://problem/13249625>
llvm-svn: 175782
A legal BUILD_VECTOR goes in and gets constant folded into another legal
BUILD_VECTOR so we don't lose any legality here. The problematic PPC
optimization that made this check necessary was fixed recently.
llvm-svn: 175759
available.
With this commit there are no longer any assertion or verifier failures when
running 'make check' without LiveVariables. There are still 56 failing tests
with codegen differences and 1 unexpectedly passing test.
llvm-svn: 175719
Rewrite value numbers directly in the 'Other' LiveInterval which is
moribund anyway. This avoids allocating the OtherAssignments vector.
llvm-svn: 175690
When findReachingDefs() finds that only one value can reach the basic
block, just copy the work list of visited blocks directly into the live
interval.
Sort the block list and use a LiveRangeUpdater to make the bulk add
fast.
When multiple reaching defs are found, transfer the work list to the
updateSSA() work list as before. Also use LiveRangeUpdater in
updateLiveIns() following updateSSA().
This makes live interval analysis more than 3x faster on one huge test
case.
llvm-svn: 175685
related failures when running 'make check' without LiveVariables with the
verifier enabled. Some of the remaining failures elsewhere may still be fallout
from incorrect updating of LiveIntervals or the few missing cases left in the
two-address pass.
llvm-svn: 175672
(2xi32) (truncate ((2xi64) bitcast (buildvector i32 a, i32 x, i32 b, i32 y)))
can be folded into a (2xi32) (buildvector i32 a, i32 b).
Such a DAG would cause uneccessary vdup instructions followed by vmovn
instructions.
We generate this code on ARM NEON for a setcc olt, 2xf64, 2xf64. For example, in
the vectorized version of the code below.
double A[N];
double B[N];
void test_double_compare_to_double() {
int i;
for(i=0;i<N;i++)
A[i] = (double)(A[i] < B[i]);
}
radar://13191881
Fixes bug 15283.
llvm-svn: 175670
Adding new segments to large LiveIntervals can be expensive because the
LiveRange objects after the insertion point may need to be moved left or
right. This can cause quadratic behavior when adding a large number of
segments to a live range.
The LiveRangeUpdater class allows the LIveInterval to be in a temporary
invalid state while segments are being added. It maintains an internal
gap in the LiveInterval when it is shrinking, and it has a spill area
for new segments when the LiveInterval is growing.
The behavior is similar to the existing mergeIntervalRanges() function,
except it allocates less memory for the spill area, and the algorithm is
turned inside out so the loop is driven by the clients.
llvm-svn: 175644
- When extloading from a vector with non-byte-addressable element, e.g.
<4 x i1>, the current logic breaks. Extend the current logic to
fix the case where the element type is not byte-addressable by loading
all bytes, bit-extracting/packing each element.
llvm-svn: 175642
and removing instructions. The implementation seems more complicated than it
needs to be, but I couldn't find something simpler that dealt with all of the
corner cases.
Also add a call to repairIndexesInRange() from repairIntervalsInRange().
llvm-svn: 175601
Target implementations of getRegAllocationHints() should use the
provided allocation order, and they can never return hints outside the
order. This is already documented in TargetRegisterInfo.h.
<rdar://problem/13240556>
llvm-svn: 175540
Due to the execution order of doFinalization functions, the GC information were
deleted before AsmPrinter::doFinalization was executed. Thus, the
GCMetadataPrinter::finishAssembly was never called.
The patch fixes that by moving the code of the GCInfoDeleter::doFinalization to
Printer::doFinalization.
llvm-svn: 175528
arguably better than forward iterators for this use case, they are confusing and
there are some implementation problems with reverse iterators and MI bundles.
llvm-svn: 175393
MachineBasicBlock::SplitCriticalEdge. Since this is an iterator rather than
an instr_iterator, the isBundled() check only passes if getFirstTerminator()
returned end() and the garbage memory happens to lean that way.
Multiple successors can be present without any terminator instructions in the
case of exception handling with a fallthrough.
llvm-svn: 175383
terminators that actually have register uses when splitting critical edges.
This commit also introduces a method repairIntervalsInRange() on LiveIntervals,
which allows for repairing LiveIntervals in a small range after an arbitrary
target hook modifies, inserts, and removes instructions. It's pretty limited
right now, but I hope to extend it to support all of the things that are done
by the convertToThreeAddress() target hooks.
llvm-svn: 175382
If the frame pointer is omitted, and any stack changes occur in the inline
assembly, e.g.: "pusha", then any C local variable or C argument references
will be incorrect.
I pass no judgement on anyone who would do such a thing. ;)
rdar://13218191
llvm-svn: 175334
If two functions require different features (e.g., `-mno-sse' vs. `-msse') then
we want to honor that, especially during LTO. We can do that by resetting the
subtarget's features depending upon the 'target-feature' attribute.
llvm-svn: 175314
- add sincos to runtime library if target triple environment is GNU
- added canCombineSinCosLibcall() which checks that sincos is in the RTL and
if the environment is GNU then unsafe fpmath is enabled (required to
preserve errno)
- extended sincos-opt lit test
Reviewed by: Hal Finkel
llvm-svn: 175283
of the copy is a subregister def. The current code assumes that it can do a full
def of the destination register, but it is not checking that the def operand is
read-undef. It also doesn't clear the subregister index of the destination in
the new instruction to reflect the full subregister def.
These issues were found running 'make check' with my next commit that enables
rematerialization in more cases.
llvm-svn: 175122
RegisterCoalescer used to depend on LiveDebugVariable. LDV removes DBG_VALUEs
without emitting them at the end.
We fix this by removing LDV from RegisterCoalescer. Also add an assertion to
make sure we call emitDebugValues if DBG_VALUEs are removed at
runOnMachineFunction.
rdar://problem/13183203
Reviewed by Andy & Jakob
llvm-svn: 175023
DAGCombiner::ReduceLoadWidth was converting (trunc i32 (shl i64 v, 32))
into (shl i32 v, 32) into undef. To prevent this, check the shift count
against the final result size.
Patch by: Kevin Schoedel
Reviewed by: Nadav Rotem
llvm-svn: 174972
live ranges should always be extended, and the only successor that should be
considered for extension of other ranges is the target of the split edge.
llvm-svn: 174935
Sorry for the lack of a test case. I tried writing one for i386 as i know selects are illegal on this target, but they are actually considered legal by isel and expanded later.
I can't see any targets to trigger this, but checking for the legality of a node before forming it is general goodness.
llvm-svn: 174934
This is currently a bit hairier than it needs to be, since depending on where the
split block resides the end ListEntry of the split block may be the end ListEntry
of the original block or a new entry. Some changes to the SlotIndexes updating
should make it possible to eliminate the two cases here.
This also isn't as optimized as it could be. In the future Liveinterval should
probably get a flag that indicates whether the LiveInterval is within a single
basic block. We could ignore all such intervals when splitting an edge.
llvm-svn: 174870
This reverts my commit 171047. Now that I've removed my misguided attempt to
support backend warnings, these diagnostics are only about inline assembly.
It would take quite a bit more work to generalize them properly, so I'm
just reverting this.
llvm-svn: 174860
function is successfully handled by fast-isel. That's because function
arguments are *always* handled by SDISel. Introduce FastLowerArguments to
allow each target to provide hook to handle formal argument lowering.
As a proof-of-concept, add ARMFastIsel::FastLowerArguments to handle
functions with 4 or fewer scalar integer (i8, i16, or i32) arguments. It
completely eliminates the need for SDISel for trivial functions.
rdar://13163905
llvm-svn: 174855
support for updating SlotIndexes to MachineBasicBlock::SplitCriticalEdge(). This
calls renumberIndexes() every time; it should be improved to only renumber
locally.
llvm-svn: 174851
present, it currently verifies them with the MachineVerifier, and this passed
all of the test cases in 'make check' (when accounting for existing verifier
errors). There were some assertion failures in the two-address pass, but they
also happened on code without phis and look like they are caused by different
kill flags from LiveIntervals.
The only part that doesn't work is the critical edge splitting heuristic,
because there isn't currently an efficient way to update LiveIntervals after
splitting an edge. I'll probably start by implementing the slow fallback and
test that it works before tackling the fast path for single-block ranges. The
existing code that updates LiveVariables is fairly slow as it is.
There isn't a command-line option for enabling this; instead, just edit
PHIElimination.cpp to require LiveIntervals.
llvm-svn: 174831
This uses a liveness algorithm that does not depend on data from the
LiveVariables analysis, it is the first step towards removing
LiveVariables completely.
llvm-svn: 174774
This reverts r171041. This was a nice idea that didn't work out well.
Clang warnings need to be associated with warning groups so that they can
be selectively disabled, promoted to errors, etc. This simplistic patch didn't
allow for that. Enhancing it to provide some way for the backend to specify
a front-end warning type seems like overkill for the few uses of this, at
least for now.
llvm-svn: 174748
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
llvm-svn: 174746
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
llvm-svn: 174741
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
llvm-svn: 174713
Failure: undefined symbol 'Lline_table_start0'.
Root-cause: we use a symbol subtraction to calculate at_stmt_list, but
the line table entries are not dumped in the assembly.
Fix: use zero instead of a symbol subtraction for Compile Unit 0.
llvm-svn: 174479
base point of a load, and the overall alignment of the load. This caused infinite loops in DAG combine with the
original application of this patch.
ORIGINAL COMMIT LOG:
When the target-independent DAGCombiner inferred a higher alignment for a load,
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
llvm-svn: 174431
All targets are now adding return value registers as implicit uses on
return instructions, and there is no longer a need for the live out
lists.
llvm-svn: 174417
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
llvm-svn: 174343
Per discussion in rdar://13127907, we should emit a hard error only if
people write code where the requested alignment is larger than achievable
and assumes the low bits are zeros. A warning should be good enough when
we are not sure if the source code assumes the low bits are zeros.
rdar://13127907
llvm-svn: 174336
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
llvm-svn: 174325
We used to create children DIEs for a scope, then check whether ScopeDIE is
null. If ScopeDIE is null, the children DIEs will be dangling. Other DIEs can
link to those dangling DIEs, which are not emitted at all, causing dwarf error.
The current testing case is 4k lines, from MultiSource/BenchMark/McCat/09-vor.
rdar://problem/13071959
llvm-svn: 174084
conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
the target provides a sincos library call.
Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.
rdar://13087969
PR13204
llvm-svn: 173755
The common code in the post-RA scheduler to break anti-dependencies on the
critical path contained a flaw. In the reported case, an anti-dependency
between the overlapping registers %X4 and %R4 exists:
%X29<def> = OR8 %X4, %X4
%R4<def>, %X3<def,dead,tied3> = LBZU 1, %X3<kill,tied1>
The unpatched code breaks the dependency by replacing %R4 and its uses
with %R3, the first register on the available list. However, %R3 and
%X3 overlap, so this creates two overlapping definitions on the same
instruction.
The fix is straightforward, preventing selection of a register that
overlaps any other defined register on the same instruction.
The test case is reduced from the bug report, and verifies that we no
longer produce "lbzu 3, 1(3)" when breaking this anti-dependency.
llvm-svn: 173706
Fix that by adding a cast to the shift expander. This came up with vector shifts
on sse-less X86 CPUs.
<2 x i64> = shl <2 x i64> <2 x i64>
-> i64,i64 = shl i64 i64; shl i64 i64
-> i32,i32,i32,i32 = shl_parts i32 i32 i64; shl_parts i32 i32 i64
Now we cast the last two i64s to the right type. Fixes the crash in PR14668.
llvm-svn: 173615
with an initial number of elements, instead of DenseMap, which has
zero initial elements, in order to avoid the copying of elements
when the size changes and to avoid allocating space every time
LegalizeTypes is run. This patch will not affect the memory footprint,
because DenseMap will increase the element size to 64
when the first element is added.
Patch by Wan Xiaofei.
llvm-svn: 173448
Maintain separate per-node and per-tree book-keeping.
Track all instructions above a DAG node including nested subtrees.
Seperately track instructions within a subtree.
Record subtree parents.
llvm-svn: 173426
For sanity, create a root when NumDataSuccs >= 4. Splitting large
subtrees will no longer be detrimental after my next checkin to handle
nested tree. A magic number of 4 is fine because single subtrees
seldom rejoin more than this. It makes subtrees easier to visualize
and heuristics more sane.
llvm-svn: 173399
Arnold Schwaighofer