Summary:
This patch handles assembly and disassembly, but not codegen, as of yet.
Additionally, it fixes a bug whereby SP and PC as shifted-reg operands
were treated as predictable in ARMv7 Thumb; and it enables the tests
for invalid and unpredictable instructions to run on both ARMv7 and ARMv8.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14141
llvm-svn: 251516
This also lets us remove the versions of the functions that took a statically sized array as we can rely on ArrayRef implicit conversion now.
llvm-svn: 251490
cntlz is the old POWER mnemonic. cntlzw is the PowerPC mnemonic.
This change fixes an issue when -no-integrated-as: The opcode cntlz is
unrecognized by gas
Alias the POWER mnemonic cntlz[.] to the PowerPC mnemonic cntlzw[.]
This is done for because the POWER cntlz mnemonic has be used by LLVM for
a very long time. We need to make sure that assembly programs
that are using the cntlz[.] do not break with this change.
Change PowerPC tests to reflect the insn change from cntlz to cntlzw.
Add assembly test to verify cntlz[.] is encoded correctly.
Patch by Tom Rix!
llvm-svn: 251489
This recommits r250719, which caused a failure in SPEC2000.gcc
because of the incorrect insert point for the new wider load.
Convert two halfword loads into a single 32-bit word load with bitfield extract
instructions. For example :
ldrh w0, [x2]
ldrh w1, [x2, #2]
becomes
ldr w0, [x2]
ubfx w1, w0, #16, #16
and w0, w0, #ffff
llvm-svn: 251438
When optimization is disabled, edge weights that are stored in MBB won't be used so that we don't have to store them. Currently, this is done by adding successors with default weight 0, and if all successors have default weights, the weight list will be empty. But that the weight list is empty doesn't mean disabled optimization (as is stated several times in MachineBasicBlock.cpp): it may also mean all successors just have default weights.
We should discourage using default weights when adding successors, because it is very easy for users to forget update the correct edge weights instead of using default ones (one exception is that the MBB only has one successor). In order to detect such usages, it is better to differentiate using default weights from the case when optimizations is disabled.
In this patch, a new interface addSuccessorWithoutWeight(MBB*) is created for when optimization is disabled. In this case, MBB will try to maintain an empty weight list, but it cannot guarantee this as for many uses of addSuccessor() whether optimization is disabled or not is not checked. But it can guarantee that if optimization is enabled, then the weight list always has the same size of the successor list.
Differential revision: http://reviews.llvm.org/D13963
llvm-svn: 251429
convert float to half with mask/maskz for the reg to reg version and mask for the reg to mem version (there is no maskz version for reg to mem).
Differential Revision: http://reviews.llvm.org/D14113
llvm-svn: 251409
Summary: After D13851 landed, we saw backend crashes when compiling the reduced test case included in this patch. The right fix seems to be to allow these vector types for expansion in instruction selection.
Reviewers: rengolin, t.p.northover
Subscribers: RKSimon, t.p.northover, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14082
llvm-svn: 251401
GNU tools require elfiamcu to take up the entire OS field, so, e.g.
i?86-*-linux-elfiamcu is not considered a legal triple.
Make us compatible.
Differential Revision: http://reviews.llvm.org/D14081
llvm-svn: 251390
This avoid mentioning the table name an extra time and allows the lookup to be done directly in the ifs by relying on the bool conversion of the pointer.
While there make use of ArrayRef and std::find_if.
llvm-svn: 251382
Summary:
Previously we maintained two separate switch statements that had to be kept in
sync. This patch merges them into a single switch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14012
llvm-svn: 251369
Both VLDRS and VLDRD fault if the memory is not 4 byte aligned, which wasn't
really being checked before, leading to faults at runtime.
llvm-svn: 251352
Android libc provides a fixed TLS slot for the unsafe stack pointer,
and this change implements direct access to that slot on AArch64 via
__builtin_thread_pointer() + offset.
This change also moves more code into TargetLowering and its
target-specific subclasses to get rid of target-specific codegen
in SafeStackPass.
This change does not touch the ARM backend because ARM lowers
builting_thread_pointer as aeabi_read_tp, which is not available
on Android.
The previous iteration of this change was reverted in r250461. This
version leaves the generic, compiler-rt based implementation in
SafeStack.cpp instead of moving it to TargetLoweringBase in order to
allow testing without a TargetMachine.
llvm-svn: 251324
In PIC mode we were previously computing global variable addresses (or GOT
entry addresses) by adding the PC, the PC-relative GOT displacement and
the GOT-relative symbol/GOT entry displacement. Because the latter two
displacements are fixed, we ended up performing one more addition than
necessary.
This change causes us to compute addresses using a single PC-relative
displacement, resulting in a shorter code sequence. This reduces code size
by about 4% in a recent build of Chromium for Android.
As a result of this change we no longer need to compute the GOT base address
in the ARM backend, which allows us to remove the Global Base Reg pass and
SDAG lowering for the GOT.
We also now no longer use the GOT when addressing a symbol which is known
to be defined in the same linkage unit. Specifically, the symbol must have
either hidden visibility or a strong definition in the current module in
order to not use the the GOT.
This is a change from the previous behaviour where we would use the GOT to
address externally visible symbols defined in the same module. I think the
only cases where this could matter are cases involving symbol interposition,
but we don't really support that well anyway.
Differential Revision: http://reviews.llvm.org/D13650
llvm-svn: 251322
Instead of XFAIL-ing the tests with the wrong usage of the "interrupt"
attribute, we should check that we emit the correct error messages to
the user.
llvm-svn: 251295
Summary:
This patch adds support for using the "interrupt" attribute on Mips
for interrupt handling functions. At this time only mips32r2+ with the
o32 ABI with the static relocation model is supported. Unsupported
configurations will be rejected
Patch by Simon Dardis (+ clang-format & some trivial changes to follow the
LLVM coding standards by me).
Reviewers: mpf, dsanders
Subscribers: dsanders, vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10768
llvm-svn: 251286
We didn't validate that the .word directive was given a sane value,
leading to crashes when we attempt to write out the object file.
Instead, perform some validation and issue a diagnostic pointing at the
start of the diagnostic.
llvm-svn: 251270
When the target does not support these intrinsics they should be converted to a chain of scalar load or store operations.
If the mask is not constant, the scalarizer will build a chain of conditional basic blocks.
I added isLegalMaskedGather() isLegalMaskedScatter() APIs.
Differential Revision: http://reviews.llvm.org/D13722
llvm-svn: 251237
When using the MCU psABI, compiler-generated library calls should pass
some parameters in-register. However, since inreg marking for x86 is currently
done by the front end, it will not be applied to backend-generated calls.
This is a workaround for PR3997, which describes a similar issue for -mregparm.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251223
This adds support for the i?86-*-elfiamcu triple, which indicates the IAMCU psABI is used.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251222
This patch adds support for lowering to the XOP VPROT / VPROTI vector bit rotation instructions.
This has required changes to the DAGCombiner rotation pattern matching to support vector types - so far I've only changed it to support splat vectors, but generalising this further is feasible in the future.
Differential Revision: http://reviews.llvm.org/D13851
llvm-svn: 251188
Summary:
The logic here isn't straightforward because our support for
TargetOptions::GuaranteedTailCallOpt.
Also fix a bug where we were allowing tail calls to cdecl functions from
fastcall and vectorcall functions. We were special casing thiscall and
stdcall callers rather than checking for any convention that requires
clearing stack arguments before returning.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14024
llvm-svn: 251137
Summary:
When ARMFrameLowering::emitPopInst generates a "pop" instruction to restore the callee saved registers, it checks if the LR register is among them. If so, the function may decide to remove the basic block's terminator and replace it with a "pop" to the PC register instead of LR.
This leads to a problem when the block's terminator is preceded by a "llvm.debugtrap" call. The MI iterator points to the trap in such a case, which is also a terminator. If the function decides to restore LR to PC, it erroneously removes the trap.
Reviewers: asl, rengolin
Subscribers: aemerson, jfb, rengolin, dschuff, llvm-commits
Differential Revision: http://reviews.llvm.org/D13672
llvm-svn: 251123
Summary:
This ensures that BranchFolding (and similar) won't remove these blocks.
Also allow AsmPrinter::EmitBasicBlockStart to process MBBs which are
address-taken but do not have BBs that are address-taken, since otherwise
its call to getAddrLabelSymbolTableToEmit would fail an assertion on such
blocks. I audited the other callers of getAddrLabelSymbolTableToEmit
(and getAddrLabelSymbol); they all have BBs known to be address-taken
except for the call through getAddrLabelSymbol from
WinException::create32bitRef; that call is actually now unreachable, so
I've removed it and updated the signature of create32bitRef.
This fixes PR25168.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13774
llvm-svn: 251113
It turned out not to improve any of our benchmarks but occasionally led
to increased register pressure and spilling.
Only enabling for the Cyclone CPU as the results on the cortex CPUs
give mixed results.
Differential Revision: http://reviews.llvm.org/D13708
llvm-svn: 251038
PR24686 identifies a problem where a relocation expression is invalid
when not all of the symbols in the expression can be locally
resolved. This causes the compiler to request a PC-relative half16ds
relocation, which is nonsensical for PowerPC. This patch recognizes
this situation and ensures we fail the assembly cleanly.
Test case provided by Anton Blanchard.
llvm-svn: 251027
Clang runtime failure was reported.
Assertion failed: (isExtended() && "Type is not extended!"), function getTypeForEVT
I'll need to add a proper handling for PointerType in masked load/store intrinsics.
llvm-svn: 250995
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
This reapplies r242300 which was reverted in r242428 due to bot failures.
Ultimately those failures were spurious and completely unrelated to this commit. I reverted this
at the time because it was thought to be at fault.
llvm-svn: 250969
There may be other use operands that also need their kill flags cleared.
This happens in a few tests when SIFoldOperands is moved after
PeepholeOptimizer.
PeepholeOptimizer rewrites cases that look like:
%vreg0 = ...
%vreg1 = COPY %vreg0
use %vreg1<kill>
%vreg2 = COPY %vreg0
use %vreg2<kill>
to use the earlier source to
%vreg0 = ...
use %vreg0
use %vreg0
Currently SIFoldOperands sees the copied registers, so there is
only one use. So far I haven't managed to come up with a test
that currently has multiple uses of a foldable VGPR -> VGPR copy.
llvm-svn: 250960
This was checking for a variety of situations that should
never happen. This saves a tiny bit of compile time.
We should not be selecting instructions with invalid operands in the
first place. Most of the time for registers copys are inserted
to the correct operand register class.
For VOP3, since all operand types are supported and literal
constants never are, we just need to verify the constant bus
requirements (all immediates should be legal inline ones).
The only possibly tricky case to maybe worry about is if when
legalizing operands in moveToVALU with s_add_i32 and similar
instructions. If the original s_add_i32 had a literal constant
and we need to replace it with v_add_i32_e64 we would have an
unsupported literal operand. However, I don't think we should worry
about that because SIFoldOperands should handle folding literal
constant operands into the SALU instructions based on the uses.
At SIFoldOperands time, the legality and profitability of
operand types is a bit different.
llvm-svn: 250951
Summary:
Previously, we were inserting an InlineAsm statement for each line of the
inline assembly. This works for GAS but it triggers prologue/epilogue
emission when IAS is in use. This caused:
.set noreorder
.cpload $25
to be emitted as:
.set push
.set reorder
.set noreorder
.set pop
.set push
.set reorder
.cpload $25
.set pop
which led to assembler errors and caused the test to fail.
The whitespace-after-comma changes included in this patch are necessary to
match the output when IAS is in use.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13653
llvm-svn: 250895
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
C/C++ code can declare an extern function, which will show up as an import in WebAssembly's output. It's expected that the linker will resolve these, and mark unresolved imports as call_import (I have a patch which does this in wasmate).
llvm-svn: 250875
Summary:
TargetLoweringBase::Expand is defined as "Try to expand this to other ops,
otherwise use a libcall." For ISD::UDIV and ISD::SDIV, the choice between
the two possibilities was defined in a rather convoluted way:
- if DIVREM is legal, expand to DIVREM
- if DIVREM has a custom lowering, expand to DIVREM
- if DIVREM libcall is defined and a remainder from the same division is
computed elsewhere, expand to a DIVREM libcall
- else, expand to a DIV libcall
This had the undesirable effect that if both DIV and DIVREM are implemented
as libcalls, then ISD::UDIV and ISD::SDIV are expanded to the heavier DIVREM
libcall, even when the remainder isn't used.
The new code adds a new LegalizeAction, TargetLoweringBase::LibCall, so that
backends can directly control whether they prefer an expansion or a conversion
to a libcall. This makes the generic lowering code even more generic,
allowing its reuse in a wider range of target-specific configurations.
The useful effect is that ARM backend will now generate a call
to __aeabi_{i,u}div rather than __aeabi_{i,u}divmod in cases where
it doesn't need the remainder. There's no functional change outside
the ARM backend.
Reviewers: t.p.northover, rengolin
Subscribers: t.p.northover, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13862
llvm-svn: 250826
This wasn't doing anything useful. They weren't explicitly used
anywhere, and the RegScavenger ignores reserved registers.
This for some reason caused a random scheduling change in the test.
Getting the check lines to pass is too frustrating, and there's probably
not too much value in checking the vector case's operands N times.
llvm-svn: 250794
There are two things out of the ordinary in this commit. First, I made
a loop obviously "infinite" in HexagonInstrInfo.cpp. After checking if
an instruction was at the beginning of a basic block (in which case,
`break`), the loop decremented and checked the iterator for `nullptr` as
the loop condition. This has never been possible (the prev pointers are
always been circular, so even with the weird ilist/iplist
implementation, this isn't been possible), so I removed the condition.
Second, in HexagonAsmPrinter.cpp there was another case of comparing a
`MachineBasicBlock::instr_iterator` against `MachineBasicBlock::end()`
(which returns `MachineBasicBlock::iterator`). While not incorrect,
it's fragile. I switched this to `::instr_end()`.
All that said, no functionality change intended here.
llvm-svn: 250778
Convert two halfword loads into a single 32-bit word load with bitfield extract
instructions. For example :
ldrh w0, [x2]
ldrh w1, [x2, #2]
becomes
ldr w0, [x2]
ubfx w1, w0, #16, #16
and w0, w0, #ffff
llvm-svn: 250719
- Isolate the check for the existence of a stack frame into hasFP.
- Implement getFrameIndexReference for DWARF address computation.
- Use getFrameIndexReference for offset computation in eliminateFrameIndex.
- Preserve debug information for dynamically allocated stack objects.
- Prefer FP to access local objects at -O0.
- Add experimental code to skip allocframe when not strictly necessary
(disabled by default).
llvm-svn: 250718
Emit the CFI instructions after all code transformation have been done.
This will avoid any interference between CFI instructions and packetization.
llvm-svn: 250714
The mapping of these two intrinsics in ARMInstrInfo.td had a small
omission which lead to their operands not being validated/transformed
before being lowered into usat and ssat instructions. This can cause
incorrect instructions to be emitted.
I've also added tests for the remaining two saturating arithmatic
intrinsics @llvm.arm.qadd and @llvm.arm.qsub as they are missing
codegen tests.
llvm-svn: 250697
Originally I planned to use the same interface for masked gather/scatter and set isConsecutive to "false" in this case.
Now I'm implementing masked gather/scatter and see that the interface is inconvenient. I want to add interfaces isLegalMaskedGather() / isLegalMaskedScatter() instead of using the "Consecutive" parameter in the existing interfaces.
Differential Revision: http://reviews.llvm.org/D13850
llvm-svn: 250686
Add FastISel support for SSE4A scalar float / double non-temporal stores
Follow up to D13698
Differential Revision: http://reviews.llvm.org/D13773
llvm-svn: 250610
Summary:
This is a temporary hack until we get around to remapping the vreg
numbers to local numbers. Dead vregs cause bad numbering and make
consumers sad.
We could also just look at debug info an use named locals instead, but
vregs have to work properly anyways so there!
Reviewers: binji, sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13839
llvm-svn: 250594
Our previous value of "16 + 8 + MaxCallFrameSize" for ParentFrameOffset
is incorrect when CSRs are involved. We were supposed to have a test
case to catch this, but it wasn't very rigorous.
The main effect here is that calling _CxxThrowException inside a
catchpad doesn't immediately crash on MOVAPS when you have an odd number
of CSRs.
llvm-svn: 250583
The motivation for this patch starts with PR20134:
https://llvm.org/bugs/show_bug.cgi?id=20134
void foo(int *a, int i) {
a[i] = a[i+1] + a[i+2];
}
It seems better to produce this (14 bytes):
movslq %esi, %rsi
movl 0x4(%rdi,%rsi,4), %eax
addl 0x8(%rdi,%rsi,4), %eax
movl %eax, (%rdi,%rsi,4)
Rather than this (22 bytes):
leal 0x1(%rsi), %eax
cltq
leal 0x2(%rsi), %ecx
movslq %ecx, %rcx
movl (%rdi,%rcx,4), %ecx
addl (%rdi,%rax,4), %ecx
movslq %esi, %rax
movl %ecx, (%rdi,%rax,4)
The most basic problem (the first test case in the patch combines constants) should also be fixed in InstCombine,
but it gets more complicated after that because we need to consider architecture and micro-architecture. For
example, AArch64 may not see any benefit from the more general transform because the ISA solves the sexting in
hardware. Some x86 chips may not want to replace 2 ADD insts with 1 LEA, and there's an attribute for that:
FeatureSlowLEA. But I suspect that doesn't go far enough or maybe it's not getting used when it should; I'm
also not sure if FeatureSlowLEA should also mean "slow complex addressing mode".
I see no perf differences on test-suite with this change running on AMD Jaguar, but I see small code size
improvements when building clang and the LLVM tools with the patched compiler.
A more general solution to the sext(add nsw(x, C)) problem that works for multiple targets is available
in CodeGenPrepare, but it may take quite a bit more work to get that to fire on all of the test cases that
this patch takes care of.
Differential Revision: http://reviews.llvm.org/D13757
llvm-svn: 250560
Summary: The syntax has changed a bit recently.
Reviewers: binji
Subscribers: llvm-commits, jfb, sunfish, dschuff
Differential Revision: http://reviews.llvm.org/D13821
llvm-svn: 250535
Summary: Make the relooper an analysis pass, to convert CFG to AST.
Reviewers: sunfish
Subscribers: jfb, dschuff
Differential Revision: http://reviews.llvm.org/D12744
llvm-svn: 250524
Summary:
Follow the same syntax as for the spec repo. Both have evolved slightly
independently and need to converge again.
This, along with wasmate changes, allows me to do the following:
echo "int add(int a, int b) { return a + b; }" > add.c
./out/bin/clang -O2 -S --target=wasm32-unknown-unknown add.c -o add.wack
./experimental/prototype-wasmate/wasmate.py add.wack > add.wast
./sexpr-wasm-prototype/out/sexpr-wasm add.wast -o add.wasm
./sexpr-wasm-prototype/third_party/v8-native-prototype/v8/v8/out/Release/d8 -e "print(WASM.instantiateModule(readbuffer('add.wasm'), {print:print}).add(42, 1337));"
As you'd expect, the d8 shell prints out the right value.
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13712
llvm-svn: 250480
Android libc provides a fixed TLS slot for the unsafe stack pointer,
and this change implements direct access to that slot on AArch64 via
__builtin_thread_pointer() + offset.
This change also moves more code into TargetLowering and its
target-specific subclasses to get rid of target-specific codegen
in SafeStackPass.
This change does not touch the ARM backend because ARM lowers
builting_thread_pointer as aeabi_read_tp, which is not available
on Android.
llvm-svn: 250456
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags. I fixed some of this issue in D13680 but had missed INC/DEC.
This patch adds the missing EFLAGS definition.
llvm-svn: 250438
Summary:
x86 codegen is clever about generating good code for relaxed
floating-point operations, but it was being silly when globals and
immediates were involved, forgetting where the global was and
loading/storing from/to the wrong place. The same applied to hard-coded
address immediates.
Don't let it forget about the displacement.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25171
A very similar bug when doing floating-points atomics to the stack is
also fixed by this patch.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25144
Reviewers: pete
Subscribers: llvm-commits, majnemer, rsmith
Differential Revision: http://reviews.llvm.org/D13749
llvm-svn: 250429
Summary:
This macro is needed to prevent test/CodeGen/Mips/2008-08-01-AsmInline.ll from
failing after the integrated assembler is enabled by default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13654
llvm-svn: 250414
Summary:
The -mcpu=mips16 option caused the Integrated Assembler to crash because
it couldn't figure out the architecture revision number to write to the
.MIPS.abiflags section. This CPU definition has been removed because, like
microMIPS, MIPS16 is an ASE to a base architecture.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13656
llvm-svn: 250407
AVX-512 bit shuffle fails on 32 bit since we create a vector of 64-bit constants.
I split 8x64-bit const vector to 16x32 on 32-bit mode.
Differential Revision: http://reviews.llvm.org/D13644
llvm-svn: 250390
PR25157 identifies a bug where a load plus a vector shuffle is
incorrectly converted into an LXVDSX instruction. That optimization
is only valid if the load is of a doubleword, and in the noted case,
it was not. This corrects that problem.
Joint patch with Eric Schweitz, who provided the bugpoint-reduced test
case.
llvm-svn: 250324
This patch teaches x86 fast-isel how to select nontemporal stores.
On x86, we can use MOVNTI for nontemporal stores of doublewords/quadwords.
Instructions (V)MOVNTPS/PD/DQ can be used for SSE2/AVX aligned nontemporal
vector stores.
Before this patch, fast-isel always selected 'movd/movq' instead of 'movnti'
for doubleword/quadword nontemporal stores. In the case of nontemporal stores
of aligned vectors, fast-isel always selected movaps/movapd/movdqa instead of
movntps/movntpd/movntdq.
With this patch, if we use SSE2/AVX intrinsics for nontemporal stores we now
always get the expected (V)MOVNT instructions.
The lack of fast-isel support for nontemporal stores was spotted when analyzing
the -O0 codegen for nontemporal stores.
Differential Revision: http://reviews.llvm.org/D13698
llvm-svn: 250285
One of the changes in lib/Target/AMDGPU/AMDGPUMCInstLower.cpp was a new
one. Previously, bundle iterators and single-instruction iterators
could be compared to each other (comparing on underlying pointers).
I changed a comparison from using `MBB->end()` to using
`MBB->instr_end()`, since both end iterators should point at the some
place anyway.
I don't think the implicit conversion between the two iterator types is
a good idea since it's fairly easy to accidentally compare to the wrong
thing (they aren't always end iterators). Otherwise I would have just
added the conversion.
Even with that, no there should be functionality change here.
llvm-svn: 250218
Summary:
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags.
This patch adds the missing EFLAGS definition.
Floating point operations don't set flags, the subsequent fadd
optimization is therefore correct. The same applies for surrounding
load/store optimizations.
Reviewers: rsmith, rtrieu
Subscribers: llvm-commits, reames, morisset
Differential Revision: http://reviews.llvm.org/D13680
llvm-svn: 250135
This basic combine was surprisingly missing.
AMDGPU legalizes many operations in terms of 32-bit vector components,
so not doing this results in many extra copies and subregister extracts
that need to be cleaned up later.
InstCombine already does this for the hasOneUse case. The target hook
is to fix a handful of tests which break (e.g. ARM/vmov.ll) which turn
from a vector materialize repeated immediate instruction to a constant
vector load with more scalar copies from it.
llvm-svn: 250129
We made them SP relative back in March (r233137) because that's the
value the runtime passes to EH functions. With the new cleanuppad IR,
funclets adjust their frame argument from SP to FP, so our offsets
should now be FP-relative.
llvm-svn: 250088
Function LowerVSETCC (in X86ISelLowering.cpp) worked under the wrong
assumption that for non-AVX512 targets, the source type and destination type
of a type-legalized setcc node were always the same type.
This assumption was unfortunately incorrect; the type legalizer is not always
able to promote the return type of a setcc to the same type as the first
operand of a setcc.
In the case of a vsetcc node, the legalizer firstly checks if the first input
operand has a legal type. If so, then it promotes the return type of the vsetcc
to that same type. Otherwise, the return type is promoted to the 'next legal
type', which, for vectors of MVT::i1 is always a 128-bit integer vector type.
Example (-mattr=+avx):
%0 = trunc <8 x i32> %a to <8 x i23>
%1 = icmp eq <8 x i23> %0, zeroinitializer
The initial selection dag for the code above is:
v8i1 = setcc t5, t7, seteq:ch
t5: v8i23 = truncate t2
t2: v8i32,ch = CopyFromReg t0, Register:v8i32 %vreg1
t7: v8i32 = build_vector of all zeroes.
The type legalizer would firstly check if 't5' has a legal type. If so, then it
would reuse that same type to promote the return type of the setcc node.
Unfortunately 't5' is of illegal type v8i23, and therefore it cannot be used to
promote the return type of the setcc node. Consequently, the setcc return type
is promoted to v8i16. Later on, 't5' is promoted to v8i32 thus leading to the
following dag node:
v8i16 = setcc t32, t25, seteq:ch
where t32 and t25 are now values of type v8i32.
Before this patch, function LowerVSETCC would have wrongly expanded the setcc
to a single X86ISD::PCMPEQ. Surprisingly, ISel was still able to match an
instruction. In our case, ISel would have matched a VPCMPEQWrr:
t37: v8i16 = X86ISD::VPCMPEQWrr t36, t25
However, t36 and t25 are both VR256, while the result type is instead of class
VR128. This inconsistency ended up causing the insertion of COPY instructions
like this:
%vreg7<def> = COPY %vreg3; VR128:%vreg7 VR256:%vreg3
Which is an invalid full copy (not a sub register copy).
Eventually, the backend would have hit an UNREACHABLE "Cannot emit physreg copy
instruction" in the attempt to expand the malformed pseudo COPY instructions.
This patch fixes the problem adding the missing logic in LowerVSETCC to handle
the corner case of a setcc with 128-bit return type and 256-bit operand type.
This problem was originally reported by Dimitry as PR25080. It has been latent
for a very long time. I have added the minimal reproducible from that bugzilla
as test setcc-lowering.ll.
Differential Revision: http://reviews.llvm.org/D13660
llvm-svn: 250085
Summary:
This removes unnecessary instructions when extracting from an undefined register
and also fixes a crash for O32 when passing undef to a double argument in
held in integer registers.
Reviewers: vkalintiris
Subscribers: llvm-commits, zoran.jovanovic, petarj
Differential Revision: http://reviews.llvm.org/D13467
llvm-svn: 250039
The Swift Machine Scheduler Model is incomplete. There are instructions
missing which can trigger the "incomplete machine model" abort. This was
observed when a downstream SchedMachineModel was added to the ARM
target.
Patch by Christof Douma!
llvm-svn: 250033
This patch fixes a problem in function 'combineX86ShuffleChain' that causes a
chain of shuffles to be wrongly folded away when the combined shuffle mask has
only one element.
We may end up with a combined shuffle mask of one element as a result of
multiple calls to function 'canWidenShuffleElements()'.
Function canWidenShuffleElements attempts to simplify a shuffle mask by widening
the size of the elements being shuffled.
For every pair of shuffle indices, function canWidenShuffleElements checks if
indices refer to adjacent elements. If all pairs refer to "adjacent" elements
then the shuffle mask is safely widened. As a consequence of widening, we end up
with a new shuffle mask which is half the size of the original shuffle mask.
The byte shuffle (pshufb) from test pr24562.ll has a mask of all SM_SentinelZero
indices. Function canWidenShuffleElements would combine each pair of
SM_SentinelZero indices into a single SM_SentinelZero index. So, in a
logarithmic number of steps (4 in this case), the pshufb mask is simplified to
a mask with only one index which is equal to SM_SentinelZero.
Before this patch, function combineX86ShuffleChain wrongly assumed that a mask
of size one is always equivalent to an identity mask. So, the entire shuffle
chain was just folded away as the combined shuffle mask was treated as a no-op
mask.
With this patch we know check if the only element of a combined shuffle mask is
SM_SentinelZero. In case, we propagate a zero vector.
Differential Revision: http://reviews.llvm.org/D13364
llvm-svn: 250027
The XOP vector integer comparisons can deal with all signed/unsigned comparison cases directly and can be easily commuted as well (D7646).
llvm-svn: 249976
expandPostRAPseudo():
STX -> 2 * STD: The first STD should not have the kill flag set for the address.
SystemZElimCompare:
BRC -> BRCT conversion: Don't forget to remove the CC<use,kill> operand.
Needed to make SystemZ/asm-17.ll pass with -verify-machineinstrs, which
now runs with this flag.
Reviewed by Ulrich Weigand.
llvm-svn: 249945
The new implementation works at least as well as the old implementation
did.
Also delete the associated preparation tests. They don't exercise
interesting corner cases of the new implementation. All the codegen
tests of the EH tables have already been ported.
llvm-svn: 249918
x64 catchpads use rax to inform the unwinder where control should go
next. However, we must initialize rax before the epilogue sequence so
as to not perturb the unwinder.
llvm-svn: 249910
This occurred due to introducing the invalid i64 type after type
legalization had already finished, in an attempt to workaround bitcast
f64 -> v2i32 not doing constant folding.
The *right* thing is to actually fix bitcast, but that has other
complications. So, for now, just get rid of the broken workaround, and
check in a test-case showing that it doesn't crash, with TODOs for
emitting proper code.
llvm-svn: 249908
When running combine on an extract_vector_elt, it wants to look through
a bitcast to check if the argument to the bitcast was itself an
extract_vector_elt with particular operands.
However, it called getOperand() on the argument to the bitcast *before*
checking that the opcode was EXTRACT_VECTOR_ELT, assert-failing if there
were zero operands for the actual opcode.
Fix, and add trivial test.
llvm-svn: 249891
After r249764, if you didn't see the full context, it looked like
`std::next(I)` would get the same result as
`++MachineBasicBlock::iterator(I)`. However, `I` is a `MachineInstr*`
(not a `MachineBasicBlock::iterator`).
Use the `getIterator()` helper I added later (r249782) to make this code
more clear.
llvm-svn: 249852
This patch corresponds to review:
http://reviews.llvm.org/D12032
This patch builds onto the patch that provided scalar to vector conversions
without stack operations (D11471).
Included in this patch:
- Vector element extraction for all vector types with constant element number
- Vector element extraction for v16i8 and v8i16 with variable element number
- Removal of some unnecessary COPY_TO_REGCLASS operations that ended up
unnecessarily moving things around between registers
Not included in this patch (will be in upcoming patch):
- Vector element extraction for v4i32, v4f32, v2i64 and v2f64 with
variable element number
- Vector element insertion for variable/constant element number
Testing is provided for all extractions. The extractions that are not
implemented yet are just placeholders.
llvm-svn: 249822
LLCH, LLHH and CLIH had the wrong register classes for the def-operand.
Tie operands if changing opcode to an instruction with tied ops.
Comment typo fix.
These fixes were needed in order to make regression test case
SystemZ/asm-18.ll pass with -verify-machineinstrs (not used by
default).
Reviewed by Ulrich Weigand.
llvm-svn: 249811
Let parseRegister() allow RegFP Group if expecting RegV Group, since the
%f register prefix yields the FP group even while used with vector instructions.
Reviewed by Ulrich Weigand.
llvm-svn: 249810
Accept r11 when targeting Windows on ARM rather than just low registers.
Because we are in a thumb-2 only mode, this may be slightly more expensive in
code size, but results in better code for the environment since it spills the
frame register, which is generally desired for fast stack walking as per the
ABI.
llvm-svn: 249804
Stop using `getNextNode()` to get an insertion point (at least, in this
one place). Instead, use iterator logic directly.
The `getNextNode()` interface isn't actually supposed to work for
creating iterators; it's supposed to return `nullptr` (not a real
iterator) if this is the last node. It's currently broken and will
"happen" to work, but if we ever fix the function, we'll get some
strange failures in places like this.
llvm-svn: 249764
Stop using `getNextNode()` to create an insertion point for machine
instructions (at least, in this one place). Instead, use an iterator.
As a drive-by, clean up dump statements to use iterator logic.
The `getNextNode()` interface isn't actually supposed to work for
insertion points; it's supposed to return `nullptr` if this is the last
node. It's currently broken and will "happen" to work, but if we ever
fix the function, we'll get some strange failures.
llvm-svn: 249758
its own variable.
This is needed so that we can explicitly turn off MMX without turning
off SSE and also so that we can diagnose feature set incompatibilities
that involve MMX without SSE.
Rationale:
// sse3
__m128d test_mm_addsub_pd(__m128d A, __m128d B) {
return _mm_addsub_pd(A, B);
}
// mmx
void shift(__m64 a, __m64 b, int c) {
_mm_slli_pi16(a, c);
_mm_slli_pi32(a, c);
_mm_slli_si64(a, c);
_mm_srli_pi16(a, c);
_mm_srli_pi32(a, c);
_mm_srli_si64(a, c);
_mm_srai_pi16(a, c);
_mm_srai_pi32(a, c);
}
clang -msse3 -mno-mmx file.c -c
For this code we should be able to explicitly turn off MMX
without affecting the compilation of the SSE3 function and then
diagnose and error on compiling the MMX function.
This matches the existing gcc behavior and follows the spirit of
the SSE/MMX separation in llvm where we can (and do) turn off
MMX code generation except in the presence of intrinsics.
Updated a couple of tests, but primarily tested with a couple of tests
for turning on only mmx and only sse.
This is paired with a patch to clang to take advantage of this behavior.
llvm-svn: 249731
o Before this patch, BPF backend will expand UNDEF node
to i64 constant 0.
o For second pass of dag combiner, legalizer will run through
each to-be-processed dag node.
o If any new SDNode is generated and has an undef operand,
dag combiner will put undef node, newly-generated constant-0 node,
and any node which uses these nodes in the working list.
o During this process, it is possible undef operand is
generated again, and this will form an infinite loop
for dag combiner pass2.
o This patch allows UNDEF to be a legal type.
Signed-off-by: Yonghong Song <yhs@plumgrid.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
llvm-svn: 249718
This fixes yet another scenario where tryBuildVectorShuffle would
attempt to create a BUILD_VECTOR node with an invalid combination
of types. This can happen if the incoming BUILD_VECTOR has elements
of a type different from the vector element type, which is allowed
in certain cases as long as they are all the same type.
When one of these elements is used in the residual vector, and
UNDEF elements are added to fill up the residual vector, those
UNDEFs then have to use the type of the original element, not
the vector element type, or else the resulting BUILD_VECTOR
will have an invalid type combination.
llvm-svn: 249706
We emit 1 compact unwind encoding per function, and this can’t represent
the varying stack pointer that will be generated by X86CallFrameOptimization.
Disable the optimization on Darwin.
(It might be possible to split the function into multiple ranges
and emit 1 compact unwind info per range. The compact unwind emission
code isn’t ready for that and this kind of info certainly isn’t
tested/used anywhere. It might be worth exploring this path if we want
to get the space savings at some point though)
llvm-svn: 249694
This instructions doesn't have intrincis.
Added tests for lowering and encoding.
Differential Revision: http://reviews.llvm.org/D12317
llvm-svn: 249688
This fixes two separate bugs:
1) The mask for the high lane was not set correctly. That fixes PR24532.
2) The transformation should bail out if it believes it involves more than
2 lanes, as it does not currently do anything sensible in this case.
Differential Revision: http://reviews.llvm.org/D13505
llvm-svn: 249669
Compare elimination extended to recognize load-and-test instructions used
for comparison and eliminate them the same way as with compare instructions.
Test case fp-cmp-05.ll updated to expect optimized results now also for z13.
The order of instruction shortening and compare elimination passes have been
changed so that opcodes do not have to be handled in both passes.
Reviewed by Ulrich Weigand.
llvm-svn: 249666
The following instruction shortening transformations would introduce a
definition of the CC reg, so therefore liveness of CC reg must be checked:
WFADB -> ADBR
WFSDB -> SDBR
Also add the CC reg implicit def operand to the MI in case of change of opcode.
Reviewed by Ulrich Weigand.
llvm-svn: 249665
Since the LTxBRCompare instructions can't be used with vector registers, a
normal load-and-test instruction (with a modelled def operand) is used instead.
Reviewed by Ulrich Weigand.
llvm-svn: 249664
In r224059, we started verifying after addPass, but missed doing so on
insertPass. There isn't a good reason for the discrepancy, and
skipping the verifier in these cases causes bugs.
This also exposes a verifier error that was introduced in r249087, but
the verifier doesn't run until after the register coalescer, when the
issue happens to have been resolved. I've skipped the verifier after
SIFixSGPRLiveRangesID to avoid the failures for now and will follow up
with Matt for a proper fix.
llvm-svn: 249643
In particular, passing non-trivially copyable objects by value on win32
uses a dynamic alloca (inalloca). We would clobber ESP in the epilogue
and end up returning to outer space.
llvm-svn: 249637
I'll be using the function in a similar combine for AArch64. The helper was
also improved to handle undef values.
Part of http://reviews.llvm.org/D13442
llvm-svn: 249572
The ARM RTABI defines the half- to single-precision float conversion functions
with an __aeabi prefix, but libgcc only has them with a __gnu prefix. Therefore
we need to emit the __aeabi version when compiling with an eabi or eabihf
triple, and the __gnu version with a gnueabi or gnueabihf triple.
llvm-svn: 249565
Without an additional check for NEON, the compiler crashes during
legalization of NEON ldN/stN.
Differential Revision: http://reviews.llvm.org/D13508
llvm-svn: 249550
When outgoing function arguments are passed using push instructions, and EH
is enabled, we may need to indicate to the stack unwinder that the stack
pointer was adjusted before the call.
This should fix the exception handling issues in PR24792.
Differential Revision: http://reviews.llvm.org/D13132
llvm-svn: 249522
Because of the constant bus requirement, it is never legal to
use a literal constant for these instructions despite the encoding
allowing it. This was already doing the right thing, but note why.
llvm-svn: 249500
This stops using an unknown reg class operand.
Currently build_vector selection has a broken looking check
where it tries to use a VGPR reg class and an SGPR one if it
sees an SGPR use.
With the source operand has an explicit VGPR class,
illegal copies will be inserted that SIFixSGPRCopies will take care
of normally later, which will allow removing the weird check
of build_vector users. Without this, when removed v_movrels_b32 would
still be emitted even though all of the values were only stored in
SGPRs.
llvm-svn: 249494
I'm not sure why this would be necessary, and no tests fail with
them removed. Looking at the uses is suspect as well because
the use reg classes will likely change when the users are moved
as a result of moving this instruction.
llvm-svn: 249493
Summary:
We currently ignore the calling convention, so there is no real reason to
assert on the calling convention of functions.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13367
llvm-svn: 249468
Summary:
- Add CoreCLR to if/else ladders and switches as appropriate.
- Rename isMSVCEHPersonality to isFuncletEHPersonality to better
reflect what it captures.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, AndyAyers, llvm-commits
Differential Revision: http://reviews.llvm.org/D13449
llvm-svn: 249455
Summary:
The assembly printing of these is still missing the encoding size
suffix, but this will be fixed in a later commit.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13436
llvm-svn: 249424
Summary:
This fixes 7 tests during fast LLVM test-suite run:
* MultiSource/Benchmarks/McCat/18-imp/imp
* MultiSource/Applications/oggenc/oggenc
* MultiSource/Benchmarks/MallocBench/gs/gs
* MultiSource/Benchmarks/MiBench/automotive-susan/automotive-susan
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer
* MultiSource/Benchmarks/MiBench/consumer-lame/consumer-lame
* MultiSource/Benchmarks/Bullet/bullet
Error message was in the form of:
fatal error: error in backend: Cannot select: 0x95c3288: f32 = fsqrt 0x95c0190 [ORD=9] [ID=18]
0x95c0190: f32 = fadd 0x95bef30, 0x95c4d00 [ORD=8] [ID=17]
0x95bef30: f32 = fmul 0x95c4988, 0x95c4988 [ORD=5] [ID=16]
...
There was problem with selecting sqrt instruction in LLVM backend.
To fix the issue changes are made in TableGen definition for sqrt instruction in MipsInstrFPU.td and new test file sqrt.ll is added to LLVM regression tests.
Patch by Zlatko Buljan
Reviewers: zoran.jovanovic, hvarga, dsanders
Subscribers: llvm-commits, petarj
Differential Revision: http://reviews.llvm.org/D13235
llvm-svn: 249416
For the program like below
struct key_t {
int pid;
char name[16];
};
extern void test1(char *);
int test() {
struct key_t key = {};
test1(key.name);
return 0;
}
For key.name, the llc/bpf may generate the below code:
R1 = R10 // R10 is the frame pointer
R1 += -24 // framepointer adjustment
R1 |= 4 // R1 is then used as the first parameter of test1
OR operation is not recognized by in-kernel verifier.
This patch introduces an intermediate FI_ri instruction and
generates the following code that can be properly verified:
R1 = R10
R1 += -20
Patch by Yonghong Song <yhs@plumgrid.com>
llvm-svn: 249371
Most importantly, this keeps constant hoisting from preventing instruction selections ability to turn an AND with 0xffffffff into a move into a 32-bit subregister.
llvm-svn: 249370
This new syntax is built around putting each instruction on its own line
in a "mnemonic op, op, op" like syntax. It also uses conventional data
section directives like ".byte" and so on rather than requiring everything
to be in hierarchical S-expression format. This is a more natural syntax
for a ".s" file format from the perspective of LLVM MC and related tools,
while remaining easy to translate into other forms as needed.
llvm-svn: 249364
The CATCHRET operand did not match the MachineFunction's CFG. This
mismatch happened because FrameLowering created a new MachineBasicBlock
and updated the CFG but forgot to update the CATCHRET operand.
Let's make sure this doesn't happen again by strengthing the funclet
membership analysis: it can now reason about the membership of all basic
blocks, not just those inside of funclets.
llvm-svn: 249344
Summary:
We are currently only using these aliases for VOPC instructions,
but this helper will make it easier to use them everywhere.
These aliases allow for the automatic matching of instructions
with forced 32-bit encoding. Eventually, we should be able to remove
the custom C++ logic we have for this in the assembler.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13396
llvm-svn: 249330
We were previously codegen'ing memcpy as regular load/store operations and
hoping that the register allocator would allocate registers in ascending order
so that we could apply an LDM/STM combine after register allocation. According
to the commit that first introduced this code (r37179), we planned to teach the
register allocator to allocate the registers in ascending order. This never got
implemented, and up to now we've been stuck with very poor codegen.
A much simpler approach for achieving better codegen is to create MEMCPY pseudo
instructions, attach scratch virtual registers to them and then, post register
allocation, expand the MEMCPYs into LDM/STM pairs using the scratch registers.
The register allocator will have picked arbitrary registers which we sort when
expanding the MEMCPY. This approach also avoids the need to repeatedly calculate
offsets which ultimately ought to be eliminated pre-RA in order to decrease
register pressure.
Fixes PR9199 and PR23768.
[This is based on Peter Collingbourne's r238473 which was reverted.]
Differential Revision: http://reviews.llvm.org/D13239
Change-Id: I727543c2e94136e0f80b8e22d5642d7b9ee5b458
Author: Peter Collingbourne <peter@pcc.me.uk>
llvm-svn: 249322
"msr pan, #imm", while only 1-bit immediate values should be valid.
Changed encoding and decoding for msr pstate instructions.
Differential Revision: http://reviews.llvm.org/D13011
llvm-svn: 249313
Summary:
An instruction like "(d)la $5, symbol+8" previously would have crashed the
assembler as it contains an expression. This is now fixed.
A few tests cases have also been changed to reflect these changes, however
these should only be syntax changes. Some new test cases have also been
added.
Patch by Scott Egerton.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12760
llvm-svn: 249311
This extends the work done in r233995 so that now getFragment (in addition to
getSection) also works for variable symbols.
With that the existing logic to decide if a-b can be computed works even if
a or b are variables. Given that, the expression evaluation can avoid expanding
variables as aggressively and that in turn lets the relocation code see the
original variable.
In order for this to work with the asm streamer, there is now a dummy fragment
per section. It is used to assign a section to a symbol when no other fragment
exists.
This patch is a joint work by Maxim Ostapenko andy myself.
llvm-svn: 249303
The custom lowering in LowerExtendedLoad is doing the equivalent shuffle, so make use of existing lowering code to reduce duplication.
llvm-svn: 249243
We previously stopped producing Thumb2 relaxations when they weren't supported,
but only diagnosed the case where an actual relocation was produced. We should
also tell people if local symbols aren't going to work rather than silently
overflowing.
llvm-svn: 249164
This patch teaches FastIsel the following two things:
1) On SSE2, no instructions are needed for bitcasts between 128-bit vector types;
2) On AVX, no instructions are needed for bitcasts between 256-bit vector types.
Example:
%1 = bitcast <4 x i31> %V to <2 x i64>
Before (-fast-isel -fast-isel-abort=1):
FastIsel miss: %1 = bitcast <4 x i31> %V to <2 x i64>
Now we don't fall back to SelectionDAG and we correctly fold that computation
propagating the register associated to %V.
Originally reviewed here: http://reviews.llvm.org/D13347
llvm-svn: 249147
This patch teaches FastIsel the following two things:
1) On SSE2, no instructions are needed for bitcasts between 128-bit vector types;
2) On AVX, no instructions are needed for bitcasts between 256-bit vector types.
Example:
%1 = bitcast <4 x i31> %V to <2 x i64>
Before (-fast-isel -fast-isel-abort=1):
FastIsel miss: %1 = bitcast <4 x i31> %V to <2 x i64>
Now we don't fall back to SelectionDAG and we correctly fold that computation
propagating the register associated to %V.
Differential Revision: http://reviews.llvm.org/D13347
llvm-svn: 249121
Replace LiveInterval usage with LiveVariables. LiveIntervals
computes far more information than is needed for this pass
which just needs to find if an SGPR is live out of the
defining block.
LiveIntervals are not usually available that early, requiring
computing them twice which is very expensive. The extra run of
LiveIntervals/LiveVariables/SlotIndexes was costing in total
about 5% of compile time.
Continuing to use LiveIntervals is problematic. It seems
there is an option (early-live-intervals) to run the analysis
about where it should go to avoid recomputing LiveVariables,
but it seems to be completely broken with subreg liveness
enabled. There are also problems from trying to recompute
LiveIntervals since this seems to undo LiveVariables
and clearing kill flags, causing TwoAddressInstructions
to make bad decisions.
Insert the pass right after live variables and preserve it.
The tricky case to worry about might be phis since
LiveVariables doesn't count a register as live out if
in the successor block it is only used in a phi,
but I don't think this is a concern right now
because SIFixSGPRCopies replaces SGPR phis.
llvm-svn: 249087
This was the slowest target custom pass and was spending 80%
of the time in getMinimalPhysRegClass which was called
for every register operand.
Try to use the statically known register class when possible from
the instruction's MCOperandInfo. There are a few pseudo instructions
which are not well behaved with unknown register classes which still
require the expensive physical register class search.
There are a few other possibilities for making this even faster,
such as not inspecting implicit operands. For now those are checked
because it is technically possible to have a scalar load into
exec or vcc which can be implicitly used.
llvm-svn: 249079
We emit denormalized tables, where every range of invokes in the same
state gets a complete list of EH action entries. This is significantly
simpler than trying to infer the correct nested scoping structure from
the MI. Fortunately, for SEH, the nesting structure is really just a
size optimization.
With this, some basic __try / __except examples work.
llvm-svn: 249078
Summary:
Instead of asserting when the kernel metadata is different than we expect,
we should just skip lowering that function. This fixes assertion
failures with OpenCL argument metadata from older LLVM releases.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13356
llvm-svn: 249073
Catchret transfers control from a catch funclet to an earlier funclet.
However, it is not completely clear which funclet the catchret target is
part of. Make this clear by stapling the catchret target's funclet
membership onto the CATCHRET SDAG node.
llvm-svn: 249052
Support for pairing unscaled loads and stores has been enabled since the
original ARM64 port. This feature is no longer experimental, AFAICT.
llvm-svn: 249049
Add generic instructions for load complement, load negative and load positive
for fp32 and fp64, and let isel prefer them. They do not clobber CC, and so
give scheduler more freedom. SystemZElimCompare pass will convert them when it
can to the CC-setting variants.
Regression tests updated to expect the new opcodes in places where the old ones
where used. New test case SystemZ/fp-cmp-05.ll checks that
SystemZCompareElim.cpp can handle the new opcodes.
README.txt updated (bullet removed).
Note that fp128 is not yet handled, because it is relatively rare, and is a
bit trickier, because of the fact that l.dfr would operate on the sign bit of
one of the subregisters of a fp128, but we would not want to copy the other
sub-reg in case src and dst regs are not the same.
Reviewed by Ulrich Weigand.
llvm-svn: 249046
v2: Add test (Matt).
Fix capitalization of isEOP (Matt).
Move pattern to class parameter (Matt).
Make the instruction available to Cayman (Matt).
Change name from MEM_RAT WRITE_TYPED to MEM_RAT STORE_TYPED.
Patch by: Zoltan Gilian
llvm-svn: 249042
The custom code produces incorrect results if later reassociated.
Since r221657, on x86, vNi32 uitofp is lowered using an optimized
sequence:
movdqa LCPI0_0(%rip), %xmm1 ## xmm1 = [65535, ...]
pand %xmm0, %xmm1
por LCPI0_1(%rip), %xmm1 ## [0x4b000000, ...]
psrld $16, %xmm0
por LCPI0_2(%rip), %xmm0 ## [0x53000000, ...]
addps LCPI0_3(%rip), %xmm0 ## [float -5.497642e+11, ...]
addps %xmm1, %xmm0
Since r240361, the machine combiner opportunistically reassociates
2-instruction sequences (with -ffast-math). In the new code sequence,
the ADDPS' are eligible. In isolation, for simple examples (without
reassociable users), this makes no performance difference (the goal
being to enable reassociation of longer chains).
In the trivial example (just one uitofp), the reassociation doesn't
happen, because (I think) it would require the emission of a separate
movaps for a constantpool load (instead of folding it into addps).
However, when we have multiple uitofp sequences, and the constantpool
loads are CSE'd earlier, the machine combiner can do the reassociation.
When the ADDPS' are reassociated, the resulting sequence isn't correct
anymore, as we'd be adding large (2**39) constants with comparatively
smaller values (~2**23). Given that two of the three inputs are powers
of 2 larger than 2**16, and that ulp(2**39) == 2**(39-24) == 2**15,
the reassociated chain will produce 0 for any input in [0, 2**14[.
In my testing, it also produces wrong results for 99.5% of [0, 2**32[.
Avoid this by disabling the new lowering when -ffast-math. It does
mean that we'll get slower code than without it, but at least we
won't get egregiously incorrect code.
One might argue that, considering -ffast-math is all but meaningless,
uitofp producing wrong results isn't a compiler bug. But it really is.
Fixes PR24512.
...though this is really more of a workaround.
Ideally, we'd have some sort of Machine FMF, but that's a problem
that's not worth tackling until we do more with machine IR.
llvm-svn: 248965
The Win64 unwinder disassembles forwards from each PC to try to
determine if this PC is in an epilogue. If so, it skips calling the EH
personality function for that frame. Typically, this means you cannot
catch an exception in the same frame that you threw it, because 'throw'
calls a noreturn runtime function.
Previously we avoided this problem with the TrapUnreachable
TargetOption, but that's a much bigger hammer than we need. All we need
is a 1 byte non-epilogue instruction right after the call. Instead,
what we got was an unconditional branch to a shared block containing the
ud2, potentially 7 bytes instead of 1. So, this reverts r206684, which
added TrapUnreachable, and replaces it with something better.
The new code pattern matches for invoke/call followed by unreachable and
inserts an int3 into the DAG. To be 100% watertight, we would need to
insert SEH_Epilogue instructions into all basic blocks ending in a call
with no terminators or successors, but in practice this is unlikely to
come up.
llvm-svn: 248959
Previously, the index was constrained to the size of the memory operation for
no apparent reason. This change removes that constraint so that we can form
pre-index instructions with any valid offset.
llvm-svn: 248931
As Richard Barton observed at http://reviews.llvm.org/D12937#inline-107121
TargetParser in LLVM has insufficient support for ARMv6Z and ARMv6ZK.
In particular, there were no tests for TrustZone being supported in these
architectures.
The patch clears a FIXME: left by Saleem Abdulrasool in r201471, and fixes
his test case which hadn't really been testing what it was claiming to test.
Differential Revision: http://reviews.llvm.org/D13236
llvm-svn: 248921
This commit changes the interface of the vld[1234], vld[234]lane, and vst[1234],
vst[234]lane ARM neon intrinsics and associates an address space with the
pointer that these intrinsics take. This changes, e.g.,
<2 x i32> @llvm.arm.neon.vld1.v2i32(i8*, i32)
to
<2 x i32> @llvm.arm.neon.vld1.v2i32.p0i8(i8*, i32)
This change ensures that address spaces are fully taken into account in the ARM
target during lowering of interleaved loads and stores.
Differential Revision: http://reviews.llvm.org/D12985
llvm-svn: 248887
The XOP shifts just have logical/arithmetic versions and the left/right shifts are controlled by whether the value is positive/negative. Because of this I've added new X86ISD nodes instead of trying to force them to use the existing shift nodes.
Additionally Excavator cores (bdver4) support XOP and AVX2 - meaning that it should use the AVX2 shifts when it can and fall back to XOP in other cases.
Differential Revision: http://reviews.llvm.org/D8690
llvm-svn: 248878
to prevent setting a huge stride, because DATA_FORMAT has a different
meaning if ADD_TID_ENABLE is set.
This is a candidate for stable llvm 3.7.
Tested-and-Reviewed-by: Christian König <christian.koenig@amd.com>
llvm-svn: 248858
The x64 ABI requires that epilogues do not contain code other than stack
adjustments and some limited control flow. However, we'd insert code to
initialize the return address after stack adjustments. Instead, insert
EAX/RAX with the current value before we create the stack adjustments in
the epilogue.
llvm-svn: 248839
HHVM calling convention, hhvmcc, is used by HHVM JIT for
functions in translated cache. We currently support LLVM back end to
generate code for X86-64 and may support other architectures in the
future.
In HHVM calling convention any GP register could be used to pass and
return values, with the exception of R12 which is reserved for
thread-local area and is callee-saved. Other than R12, we always
pass RBX and RBP as args, which are our virtual machine's stack pointer
and frame pointer respectively.
When we enter translation cache via hhvmcc function, we expect
the stack to be aligned at 16 bytes, i.e. skewed by 8 bytes as opposed
to standard ABI alignment. This affects stack object alignment and stack
adjustments for function calls.
One extra calling convention, hhvm_ccc, is used to call C++ helpers from
HHVM's translation cache. It is almost identical to standard C calling
convention with an exception of first argument which is passed in RBP
(before we use RDI, RSI, etc.)
Differential Revision: http://reviews.llvm.org/D12681
llvm-svn: 248832
Summary:
Funclets have been turned into functions by the time they hit the object
file. Make sure that they have decent names for the symbol table and
CFI directives explaining how to reason about their prologues.
Differential Revision: http://reviews.llvm.org/D13261
llvm-svn: 248824
The immediate in the load/store should be scaled by the size of the memory
operation, not the size of the register being loaded/stored. This change gets
us one step closer to forming LDPSW instructions. This change also enables
pre- and post-indexing for halfword and byte loads and stores.
llvm-svn: 248804
alignment requirements, for example in the case of vectors.
These requirements are exploited by the code generator by using
move instructions that have similar alignment requirements, e.g.,
movaps on x86.
Although the code generator properly aligns the arguments with
respect to the displacement of the stack pointer it computes,
the displacement itself may cause misalignment. For example if
we have
%3 = load <16 x float>, <16 x float>* %1, align 64
call void @bar(<16 x float> %3, i32 0)
the x86 back-end emits:
movaps 32(%ecx), %xmm2
movaps (%ecx), %xmm0
movaps 16(%ecx), %xmm1
movaps 48(%ecx), %xmm3
subl $20, %esp <-- if %esp was 16-byte aligned before this instruction, it no longer will be afterwards
movaps %xmm3, (%esp) <-- movaps requires 16-byte alignment, while %esp is not aligned as such.
movl $0, 16(%esp)
calll __bar
To solve this, we need to make sure that the computed value with which
the stack pointer is changed is a multiple af the maximal alignment seen
during its computation. With this change we get proper alignment:
subl $32, %esp
movaps %xmm3, (%esp)
Differential Revision: http://reviews.llvm.org/D12337
llvm-svn: 248786
The splitting of > 4 dword SMRD instructions
if using an offset in an SGPR instead of an immediate
was not setting the destination register,
resulting an an instruction missing an operand
which would assert later.
Test will be included in a following commit
which fixes a related issue.
llvm-svn: 248739
Summary:
The P5600 is an out-of-order, superscalar implementation of the MIPS32R5
architecture.
The scheduler has a few missing details (see the 'Tricky Instructions'
section and some quirks of the P5600 are deliberately omitted due to
implementation difficulty and low chance of significant benefit (e.g. the
predicate on P5600WriteEitherALU). However, testing on SingleSource is
showing significant performance benefits on some apps (seven in the 10-30%
range) and only one significant regression (12%) when
-pre-RA-sched=linearize is given. Without -pre-RA-sched=linearize the
results are more variable. Some do even better (up to 55% improvement) but
increased numbers of copies are slowing others down (up to 12%).
Overall, the scheduler as it currently stands is a 2.4% win with
-pre-RA-sched=linearize and a 2.7% win without -pre-RA-sched=linearize.
I'm sure we can improve on this further.
For completeness, the FPGA this was tested on shows some failures with and
without the P5600 scheduler. These appear to be scheduling related since
the two test runs have fairly different sets of failing tests even after
accounting for other factors (e.g. spurious connection failures) however
it's not P5600 specific since we also get some for the generic scheduler.
Reviewers: vkalintiris
Subscribers: mpf, llvm-commits, atrick, vkalintiris
Differential Revision: http://reviews.llvm.org/D12193
llvm-svn: 248725
supportsTailCall() has two callers. Both of them double-check isThumb1Only(),
and refuse to proceed with tail-calling in that case.
Therefore, it makes sense to move this check to
ARMSubtarget::initSubtargetFeatures, where SupportsTailCall is initialized;
and to eliminate the extra checks at the call sites.
Following a review comment, added an "assert(supportsTailCall())"
in IsEligibleForTailCall.
NFC.
llvm-svn: 248703
These require multiple mov instructions to copy,
but the default value is that 1 instruction is needed.
I'm not sure if this actually changes anything.
llvm-svn: 248651
Trying to use the version with the explicit output operand
would complain because of the missing WriteSALU. I'm not sure
why it doesn't complain about this with the implicit VCC def.
llvm-svn: 248646
It's easier to understand creating a full instruction
than the current situation where sometimes a new
instruction is created and sometimes it is awkwardly
mutated in place.
llvm-svn: 248627
This is a redo of D7208 ( r227242 - http://llvm.org/viewvc/llvm-project?view=revision&revision=227242 ).
The patch was reverted because an AArch64 target could infinite loop after the change in DAGCombiner
to merge vector stores. That happened because AArch64's allowsMisalignedMemoryAccesses() wasn't telling
the truth. It reported all unaligned memory accesses as fast, but then split some 128-bit unaligned
accesses up in performSTORECombine() because they are slow.
This patch attempts to fix the problem in AArch's allowsMisalignedMemoryAccesses() while preserving
existing (perhaps questionable) lowering behavior.
The x86 test shows that store merging is working as intended for a target with fast 32-byte unaligned
stores.
Differential Revision: http://reviews.llvm.org/D12635
llvm-svn: 248622
Don't run passes related to stack maps, garbage collection,
exceptions since these aren't useful for GPUs.
There might be a few more to turn off that I'm less sure about
(e.g. ShrinkWrapping) or I'm not sure how to disable
(SafeStack and StackProtector)
llvm-svn: 248591
This fixes a select error when the i64 source was also
bitcasted to v2i32 in the original source.
Instead of awkwardly trying to select the modified source value and
the store, replace before isel begins.
Uses a worklist to avoid possible problems from mutating the DAG,
although it seems to work OK without it.
llvm-svn: 248589
When buffer resource descriptors were built, the upper two components
of the descriptor were first composed into a 64-bit register because
legalizeOperands assumed all operands had the same register class.
Fix that problem, but keep the workaround. I'm not sure anything
actually is actually emitting such a REG_SEQUENCE now.
If multiple resource descriptors are set up with different base
pointers, this is copied with a single s_mov_b64. We probably
should fix this better by recognizing a pair of s_mov_b32 later,
but for now delete the dead code.
llvm-svn: 248585
This was only set on the final _si/_vi version, but not
on the pseudos most of codegen sees.
No test since these instructions aren't used yet.
llvm-svn: 248583
These were all using the default 32-bit VALU write class,
but the i64/f64 compares are half rate.
I'm not sure this is really correct, because they are still using
the write to VALU write class, even though they really write
to the SALU.
llvm-svn: 248582
We now emit the compiler generated divide by zero check that was needed for the
MSVC routines. We construct a psuedo-instruction for the DBZ check as the
operation requires splitting up the BB. For the 64-bit operations, we need to
custom expand the node as we need to insert the DBZ check and then emit the
libcall to the appropriate name. Because this is target specific, it seemed
better to reproduce the expansion operation from the target-agnostic type
legalization rather than sink this there to avoid the duplication. The division
library calls now match MSVC semantically.
llvm-svn: 248561
Fix for D12561 - we weren't correctly ensuring that the base element for extension was moved to start on a boundary suitable for UNPCKL/H
llvm-svn: 248536
These are necessary for implementing mem_fence for
OpenCL 2.0.
The VI assembler tests are disabled since it seems to be
using the wrong encoding or opcode.
llvm-svn: 248532
The pre- and post-increment version update the base register, but the post-
version was defined incorrectly. There is no test case as we don't currently
generate these instructions, but I plan on changing that in the near future.
llvm-svn: 248528
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following a revert of r248152 and new review comments, this patch also includes
renaming FeatureDSPThumb2 -> FeatureDSP, hasThumb2DSP() -> hasDSP(), etc.
The spelling of "t2dsp" is preserved, pending a further investigation of its
possible external usage.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248519
Allow a target to do something other than search for copies
that will avoid cross register bank copies.
Implement for SI by only rewriting the most basic copies,
so it should look through anything like a subregister extract.
I'm not entirely satisified with this because it seems like
eliminating a reg_sequence that isn't fully used should work
generically for all targets without them having to override
something. However, it seems to be tricky to have a simple
implementation of this without rewriting to invalid kinds
of subregister copies on some targets.
I'm not sure if there is currently a generic way to easily check
if a subregister index would be valid for the current use.
The current set of TargetRegisterInfo::get*Class functions don't
quite behave like I would expect (e.g. getSubClassWithSubReg
returns the maximal register class rather than the minimal), so
I'm not sure how to make the generic test keep searching if
SrcRC:SrcSubReg is a valid replacement for DefRC:DefSubReg. Making
the default implementation to check for simple copies breaks
a variety of ARM and x86 tests by producing illegal subregister uses.
The ARM tests are not actually changed since it should still be using
the same sharesSameRegisterFile implementation, this just relaxes
them to not check for specific registers.
llvm-svn: 248478
Instead of always inserting a copy in case
the super register is itself a subregister,
only extract to the super reg class if this is
actually the case.
This shouldn't really change codegen, but
makes looking at the output of SIFixSGPRCopies
easier to read.
llvm-svn: 248467
This time, the issue is that we weren't accounting for the possibility that
aligned DPRs could have been stored after the final "push" in a prologue. When
that happened we effectively moved a "sub sp, #N" from below the aligned stores
to above them, and everything went to pot.
To make it worse, I'd actually committed something testing that we produced
wrong code, so the test update is tiny.
llvm-svn: 248437
Add two new ways of accessing the unsafe stack pointer:
* At a fixed offset from the thread TLS base. This is very similar to
StackProtector cookies, but we plan to extend it to other backends
(ARM in particular) soon. Bionic-side implementation here:
https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
not emutls).
This is a re-commit of a change in r248357 that was reverted in
r248358.
llvm-svn: 248405
The BEXTR comments didn't make sense before, we may want to extend the
FP logic transform to work on vectors, and this way is more beautiful.
llvm-svn: 248404
This reverts r248388 and fixes the underlying bug: hasAddr64 was initialized
in runOnMachineFunction, but runOnMachineFunction isn't ever called in
CodeGen/WebAssembly/global.ll since that testcase has no functions. The fix
here is to use AsmPrinter's getPointerSize() as needed to determine the
pointer size instead.
llvm-svn: 248394
The ARM backend has some logic that only allows the fast-isel to be enabled for
subtargets where it is known to be stable. This adds a backend option to
override this and force the fast-isel to be used for any target, to allow it to
be tested.
This is an ARM-specific option, because no other backend disables the fast-isel
on a per-subtarget basis.
llvm-svn: 248369
This patches removes the x86.sse41.pmovsx* intrinsics, provides a suitable upgrade path and updates relevant tests to sign extend a subvector instead.
LLVM counterpart to D12835
Differential Revision: http://reviews.llvm.org/D13002
llvm-svn: 248368
Summary:
It is fairly common to call SE->getConstant(Ty, 0) or
SE->getConstant(Ty, 1); this change makes such uses a little bit
briefer.
I've refactored the call sites I could find easily to use getZero /
getOne.
Reviewers: hfinkel, majnemer, reames
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12947
llvm-svn: 248362
Add two new ways of accessing the unsafe stack pointer:
* At a fixed offset from the thread TLS base. This is very similar to
StackProtector cookies, but we plan to extend it to other backends
(ARM in particular) soon. Bionic-side implementation here:
https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
not emutls).
llvm-svn: 248357
ARM counterpart to r248291:
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.
Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.
Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".
Differential Revision: http://reviews.llvm.org/D13033
llvm-svn: 248294
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.
Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.
Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".
Differential Revision: http://reviews.llvm.org/D13033
llvm-svn: 248291
Summary:
Almost no functional change since the InstrItinData's have been duplicated.
The one functional change is to remove IIBranch from the MSA branches. The
classes will be assigned to the MSA instructions as part of implementing
the P5600 scheduler.
II_IndirectBranchPseudo and II_ReturnPseudo can probably be removed. I've
preserved the itinerary information for the corresponding pseudo
instructions to avoid making a functional change to these pseudos in
this patch.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12189
llvm-svn: 248273
Summary:
The only instructions left in IIAlu are MIPS16 specific. We're not
implementing a MIPS16 scheduler at this time so rename the class to make it
obvious that they are MIPS16 instructions.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12188
llvm-svn: 248267
The C standard has historically not specified whether or not these functions should raise the inexact flag. Traditionally on Darwin, these functions *did* raise inexact, and the llvm lowerings followed that conventions. n1778 (C bindings for IEEE-754 (2008)) clarifies that these functions should not set inexact. This patch brings the lowerings for arm64 and x86 in line with the newly specified behavior. This also lets us fold some logic into TD patterns, which is nice.
Differential Revision: http://reviews.llvm.org/D12969
llvm-svn: 248266
Summary:
Based on a patch by David Chisnall. I've modified the original patch as follows:
* Moved the expansion to the TargetStreamers so that the directive isn't
expanded when emitting assembly.
* Fixed an operand order bug.
* Changed the move instructions from DADDu to OR to match recent changes to GAS.
Reviewers: vkalintiris
Subscribers: llvm-commits, emaste, seanbruno, theraven
Differential Revision: http://reviews.llvm.org/D13017
llvm-svn: 248258
Summary:
No functional change since no InstrItinData is provided.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12190
llvm-svn: 248257
This patch generalizes the lowering of shuffles as zero extensions to allow extensions that don't start from the first element. It now recognises extensions starting anywhere in the lower 128-bits or at the start of any higher 128-bit lane.
The motivation was to reduce the number of high cost pshufb calls, but it also improves the SSE2 case as well.
Differential Revision: http://reviews.llvm.org/D12561
llvm-svn: 248250
The vext pseudo-instruction takes the number of elements that need to be
extracted, not the number of bytes. Hence, use the number of elements
directly instead of scaling them with a factor.
Reviewers: Silviu Baranga, James Molloy
(not reflected in the differential revision)
Differential Revision: http://reviews.llvm.org/D12974
llvm-svn: 248208
The ISD::FPOW and ISD::FSINCOS opcodes default to Legal, but there
is no legal instruction for those on SystemZ. This could cause
LLVM internal errors. Fixed by setting the operation action to
Expand for those opcodes.
Also added test cases for all other LLVM IR intrinsics that should
generate a library call. (Those already work correctly since the
default operation action is fine.)
llvm-svn: 248180
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following review comments, also updating the description of FeatureDSPThumb2
in ARM.td.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248152
Summary:
Also tightened up the test and made a trivial fix to prevent double-newline
after emitting .cpsetup directives.
Reviewers: vkalintiris
Subscribers: seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D12956
llvm-svn: 248143
Now that we have fast vector CTPOP implementations we can use this to speed up vector CTTZ using the pattern (cttz(x) = ctpop((x & -x) - 1))
Additionally, for AVX512CD that provides lzcnt instructions we can use the pattern (cttz_undef(x) = (width - 1) - ctlz(x & -x))
Differential Revision: http://reviews.llvm.org/D12663
llvm-svn: 248091
In ARMBaseInstrInfo::isProfitableToIfCvt(), there is a simple cost model in which the number of cycles is scaled by a probability to estimate the cost. However, when the number of cycles is small (which is usually the case), there is a precision issue after the computation. To avoid this issue, this patch scales those cycles by 1024 (chosen to make the multiplication a litter faster) before they are scaled by the probability. Other variables are also scaled up for the final comparison.
Differential Revision: http://reviews.llvm.org/D12742
llvm-svn: 248018
Summary:
For bitfield insert OR matching, check both operands for larger pattern
first before checking for smaller pattern.
Add pattern for unsigned bitfield insert-in-zero done with SHL+AND.
Resolves PR21631.
Reviewers: jmolloy, t.p.northover
Subscribers: aemerson, rengolin, llvm-commits, mcrosier
Differential Revision: http://reviews.llvm.org/D12908
llvm-svn: 248006
Summary:
Some values of 'reglist' are reserved and cause the disassembler to read past
the end of the Regs array. Treat lwm32's containing reserved values as invalid
instructions.
Reviewers: zoran.jovanovic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12959
llvm-svn: 247990
This makes catchret look more like a branch, and less like a weird use
of BlockAddress. It also lets us get away from
llvm.x86.seh.restoreframe, which relies on the old parentfpoffset label
arithmetic.
llvm-svn: 247936
Summary:
This assembler directive is used in O32 PIC to restore the current function's $gp after executing JAL's. The $gp is first stored on the stack at a user-specified offset.
It has the following format: ".cprestore 8" (where 8 is the offset).
This fixes llvm.org/PR20967.
Patch by Toma Tabacu.
Reviewers: seanbruno, tomatabacu
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D6267
llvm-svn: 247897
AVX-512 does not provide an instruction that shuffles mask register. So I do the following way:
mask-2-simd , shuffle simd , simd-2-mask
Differential Revision: http://reviews.llvm.org/D12727
llvm-svn: 247876
Clang now passes the adjectives as an argument to catchpad.
Getting the CatchObj working is simply a matter of threading another
static alloca through codegen, first as an alloca, then as a frame
index, and finally as a frame offset.
llvm-svn: 247844
Otherwise we'd try to emit the thunk that passes the LSDA to
__CxxFrameHandler3. We don't emit the LSDA if there were no landingpads,
so we'd end up with an assembler error when trying to write the COFF
object.
llvm-svn: 247820
This pass implements a simple algorithm for conversion from CFG to
wasm's structured control flow. It doesn't yet handle multiple-entry
loops; that will be added in a future patch.
It also adds initial support for switch statements.
Differential Revision: http://reviews.llvm.org/D12735
llvm-svn: 247818
After D10403, we had FMF in the DAG but disabled by default. Nick reported no crashing errors after some stress testing,
so I enabled them at r243687. However, Escha soon notified us of a bug not covered by any in-tree regression tests:
if we don't propagate the flags, we may fail to CSE DAG nodes because differing FMF causes them to not match. There is
one test case in this patch to prove that point.
This patch hopes to fix or leave a 'TODO' for all of the in-tree places where we create nodes that are FMF-capable. I
did this by putting an assert in SelectionDAG.getNode() to find any FMF-capable node that was being created without FMF
( D11807 ). I then ran all regression tests and test-suite and confirmed that everything passes.
This patch exposes remaining work to get DAG FMF to be fully functional: (1) add the flags to non-binary nodes such as
FCMP, FMA and FNEG; (2) add the flags to intrinsics; (3) use the flags as conditions for transforms rather than the
current global settings.
Differential Revision: http://reviews.llvm.org/D12095
llvm-svn: 247815
When trying emit a stack adjustments using pops, frame lowering selects an
arbitrary free GPR. It should always select one from an appropriate class...
This fixes PR24649.
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D12609
llvm-svn: 247785
This is the mirror image of r242395.
When X86FrameLowering::emitEpilogue() looks for where to insert the %esp addition that
deallocates stack space used for local allocations, it assumes that any sequence of pop
instructions from function exit backwards consists purely of restoring callee-save registers.
This may be false, since from some point backward, the pops may be clean-up of stack space
allocated for arguments to a call.
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D12688
llvm-svn: 247784
Under certain circumstances, tryBuildVectorShuffle would attempt to
create a BUILD_VECTOR node with an invalid combination of types.
This happened when one of the components of the original BUILD_VECTOR
was itself a TRUNCATE node. That TRUNCATE was stripped off during
intermediate processing to simplify code, but when adding the node
back to the result vector, we still need it to get the type right.
llvm-svn: 247694
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
Summary:
Added support for the following instructions:
CACHEE, LBE, LBUE, LHE, LHUE, LWE, LLE, LWLE, LWRE, PREFE,
SBE, SHE, SWE, SCE, SWLE, SWRE, TLBINV, TLBINVF
This required adding some infrastructure for the EVA ASE.
Patch by Scott Egerton.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11139
llvm-svn: 247669
Summary:
These operands had the same purpose, however the MipsMemSimm9GPRAsmOperand
operand was only for micromips32r6 and the MipsMemSimm9AsmOperand did not
have a ParserMatchClass.
Patch by Scott Egerton
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12730
llvm-svn: 247573
Turning (op x (mul y k)) into (op x (lsl (mul y k>>n) n)) is beneficial when
we can do the lsl as a shifted operand and the resulting multiply constant is
simpler to generate.
Do this by doing the transformation when trying to select a shifted operand,
as that ensures that it actually turns out better (the alternative would be to
do it in PreprocessISelDAG, but we don't know for sure there if extracting the
shift would allow a shifted operand to be used).
Differential Revision: http://reviews.llvm.org/D12196
llvm-svn: 247569
The MipsTargetELFStreamer can receive ABI info from many sources. For example,
from the MipsAsmParser instance. Lifetime of the MipsAsmParser can be shorter
than MipsTargetELFStreamer's lifetime. In that case we get a dangling pointer
to MipsABIInfo.
Differential Revision: http://reviews.llvm.org/D12805
llvm-svn: 247546
KNL does not have VXORPS, VORPS for 512-bit values.
I use integer VPXOR, VPOR that actually do the same.
X86ISD::FXOR/FOR are generated as a result of FSUB combining.
Differential Revision: http://reviews.llvm.org/D12753
llvm-svn: 247523
The changes in:
test/CodeGen/X86/machine-cp.ll
are just due to scheduling differences after some logic instructions were reassociated.
llvm-svn: 247516
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
realignment should be forced.
With this commit, we can now force stack realignment when doing LTO and
do so on a per-function basis. Also, add a new cl::opt option
"stackrealign" to CommandFlags.h which is used to force stack
realignment via llc's command line.
Out-of-tree projects currently using -force-align-stack to force stack
realignment should make changes to attach the attribute to the functions
in the IR.
Differential Revision: http://reviews.llvm.org/D11814
llvm-svn: 247450
We used to have this magic "hasLoadLinkedStoreConditional()" callback,
which really meant two things:
- expand cmpxchg (to ll/sc).
- expand atomic loads using ll/sc (rather than cmpxchg).
Remove it, and, instead, introduce explicit callbacks:
- bool shouldExpandAtomicCmpXchgInIR(inst)
- AtomicExpansionKind shouldExpandAtomicLoadInIR(inst)
Differential Revision: http://reviews.llvm.org/D12557
llvm-svn: 247429
The Win32 EH runtime caller does not preserve EBP, even though it does
preserve the CSRs (EBX, ESI, EDI) for us. The result was that each
finally funclet call would leave the frame pointer off by 12 bytes.
llvm-svn: 247348
The (mostly-deprecated) SelectionDAG-based ILPListDAGScheduler scheduler
was making poor scheduling decisions, causing high register pressure and
extraneous register spills.
Switching to the newer machine scheduler generates better code -- even
without there being a machine model defined for SPARC yet.
(Actually committing the test changes too, this time, unlike r247315)
llvm-svn: 247343
The (mostly-deprecated) SelectionDAG-based ILPListDAGScheduler scheduler
was making poor scheduling decisions, causing high register pressure and
extraneous register spills.
Switching to the newer machine scheduler generates better code -- even
without there being a machine model defined for SPARC yet.
llvm-svn: 247315
Except the changes that defined virtual destructors as =default, because that
ran into problems with GCC 4.7 and overriding methods that weren't noexcept.
llvm-svn: 247298
The tests in isVTRNMask and isVTRN_v_undef_Mask should also check that the elements of the upper and lower half of the vectorshuffle occur in the correct order when both halves are used. Without this test the code assumes that it is correct to use vector transpose (vtrn) for the masks <1, 1, 0, 0> and <1, 3, 0, 2>, among others, but the transpose actually incorrectly generates shuffles for <0, 0, 1, 1> and <0, 2, 1, 3> in this case.
Patch by Jeroen Ketema!
llvm-svn: 247254
The changes in this patch are as follows:
1. Modify the emitPrologue and emitEpilogue methods to work properly when the prologue and epilogue blocks are not the first/last blocks in the function
2. Fix a bug in PPCEarlyReturn optimization caused by an empty entry block in the function
3. Override the runShrinkWrap PredicateFtor (defined in TargetMachine) to check whether shrink wrapping should run:
Shrink wrapping will run on PPC64 (Little Endian and Big Endian) unless -enable-shrink-wrap=false is specified on command line
A new test case, ppc-shrink-wrapping.ll was created based on the existing shrink wrapping tests for x86, arm, and arm64.
Phabricator review: http://reviews.llvm.org/D11817
llvm-svn: 247237
First, we need to teach isFrameOffsetLegal about STNP.
It already knew about the STP/LDP variants, but those were probably
never exercised, because it's only the load/store optimizer that
generates STP/LDP, and the only user of the method is frame lowering,
which runs earlier.
The STP/LDP cases were wrong: they didn't take into account the fact
that they return two results, not one, so the immediate offset will be
the 4th operand, not the 3rd.
Follow-up to r247234.
llvm-svn: 247236
We could go through the load/store optimizer and match STNP where
we would have matched a nontemporal-annotated STP, but that's not
reliable enough, as an opportunistic optimization.
Insetad, we can guarantee emitting STNP, by matching them at ISel.
Since there are no single-input nontemporal stores, we have to
resort to some high-bits-extracting trickery to generate an STNP
from a plain store.
Also, we need to support another, LDP/STP-specific addressing mode,
base + signed scaled 7-bit immediate offset.
For now, only match the base. Let's make it smart separately.
Part of PR24086.
llvm-svn: 247231
All of the complexity is in cleanupret, and it mostly follows the same
codepaths as catchret, except it doesn't take a return value in RAX.
This small example now compiles and executes successfully on win32:
extern "C" int printf(const char *, ...) noexcept;
struct Dtor {
~Dtor() { printf("~Dtor\n"); }
};
void has_cleanup() {
Dtor o;
throw 42;
}
int main() {
try {
has_cleanup();
} catch (int) {
printf("caught it\n");
}
}
Don't try to put the cleanup in the same function as the catch, or Bad
Things will happen.
llvm-svn: 247219
The 32-bit tables don't actually contain PC range data, so emitting them
is incredibly simple.
The 64-bit tables, on the other hand, use the same table for state
numbering as well as label ranges. This makes things more difficult, so
it will be implemented later.
llvm-svn: 247192
With subregister liveness enabled we can detect the case where only
parts of a register are live in, this is expressed as a 32bit lanemask.
The current code only keeps registers in the live-in list and therefore
enumerated all subregisters affected by the lanemask. This turned out to
be too conservative as the subregister may also cover additional parts
of the lanemask which are not live. Expressing a given lanemask by
enumerating a minimum set of subregisters is computationally expensive
so the best solution is to simply change the live-in list to store the
lanemasks as well. This will reduce memory usage for targets using
subregister liveness and slightly increase it for other targets
Differential Revision: http://reviews.llvm.org/D12442
llvm-svn: 247171
with the new pass manager, and no longer relying on analysis groups.
This builds essentially a ground-up new AA infrastructure stack for
LLVM. The core ideas are the same that are used throughout the new pass
manager: type erased polymorphism and direct composition. The design is
as follows:
- FunctionAAResults is a type-erasing alias analysis results aggregation
interface to walk a single query across a range of results from
different alias analyses. Currently this is function-specific as we
always assume that aliasing queries are *within* a function.
- AAResultBase is a CRTP utility providing stub implementations of
various parts of the alias analysis result concept, notably in several
cases in terms of other more general parts of the interface. This can
be used to implement only a narrow part of the interface rather than
the entire interface. This isn't really ideal, this logic should be
hoisted into FunctionAAResults as currently it will cause
a significant amount of redundant work, but it faithfully models the
behavior of the prior infrastructure.
- All the alias analysis passes are ported to be wrapper passes for the
legacy PM and new-style analysis passes for the new PM with a shared
result object. In some cases (most notably CFL), this is an extremely
naive approach that we should revisit when we can specialize for the
new pass manager.
- BasicAA has been restructured to reflect that it is much more
fundamentally a function analysis because it uses dominator trees and
loop info that need to be constructed for each function.
All of the references to getting alias analysis results have been
updated to use the new aggregation interface. All the preservation and
other pass management code has been updated accordingly.
The way the FunctionAAResultsWrapperPass works is to detect the
available alias analyses when run, and add them to the results object.
This means that we should be able to continue to respect when various
passes are added to the pipeline, for example adding CFL or adding TBAA
passes should just cause their results to be available and to get folded
into this. The exception to this rule is BasicAA which really needs to
be a function pass due to using dominator trees and loop info. As
a consequence, the FunctionAAResultsWrapperPass directly depends on
BasicAA and always includes it in the aggregation.
This has significant implications for preserving analyses. Generally,
most passes shouldn't bother preserving FunctionAAResultsWrapperPass
because rebuilding the results just updates the set of known AA passes.
The exception to this rule are LoopPass instances which need to preserve
all the function analyses that the loop pass manager will end up
needing. This means preserving both BasicAAWrapperPass and the
aggregating FunctionAAResultsWrapperPass.
Now, when preserving an alias analysis, you do so by directly preserving
that analysis. This is only necessary for non-immutable-pass-provided
alias analyses though, and there are only three of interest: BasicAA,
GlobalsAA (formerly GlobalsModRef), and SCEVAA. Usually BasicAA is
preserved when needed because it (like DominatorTree and LoopInfo) is
marked as a CFG-only pass. I've expanded GlobalsAA into the preserved
set everywhere we previously were preserving all of AliasAnalysis, and
I've added SCEVAA in the intersection of that with where we preserve
SCEV itself.
One significant challenge to all of this is that the CGSCC passes were
actually using the alias analysis implementations by taking advantage of
a pretty amazing set of loop holes in the old pass manager's analysis
management code which allowed analysis groups to slide through in many
cases. Moving away from analysis groups makes this problem much more
obvious. To fix it, I've leveraged the flexibility the design of the new
PM components provides to just directly construct the relevant alias
analyses for the relevant functions in the IPO passes that need them.
This is a bit hacky, but should go away with the new pass manager, and
is already in many ways cleaner than the prior state.
Another significant challenge is that various facilities of the old
alias analysis infrastructure just don't fit any more. The most
significant of these is the alias analysis 'counter' pass. That pass
relied on the ability to snoop on AA queries at different points in the
analysis group chain. Instead, I'm planning to build printing
functionality directly into the aggregation layer. I've not included
that in this patch merely to keep it smaller.
Note that all of this needs a nearly complete rewrite of the AA
documentation. I'm planning to do that, but I'd like to make sure the
new design settles, and to flesh out a bit more of what it looks like in
the new pass manager first.
Differential Revision: http://reviews.llvm.org/D12080
llvm-svn: 247167
Instead of extracting both 32-bit components from the 128-bit
register. This produces fewer copies and is easier for
the copy peephole optimizer to understand and see the actual uses
as extracts from a reg_sequence.
This avoids needing to handle subregister composing in the
PeepholeOptimizer's ValueTracker for this case.
llvm-svn: 247162
Summary:
This helps mostly when we use add instructions for address calculations
that contain immediates.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12256
llvm-svn: 247157
Summary:
We are not scalarizing the wide selects in codegen for i16 and i32 and
therefore we can remove the amortization factor. We still have issues
with i64 vectors in codegen though.
Reviewers: mcrosier
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12724
llvm-svn: 247156
Currently this hits an assert that extload should
always be supported, which assumes integer extloads.
This moves a hack out of SI's argument lowering and
is covered by existing tests.
llvm-svn: 247113
Summary:
32-bit funclets have short prologues that allocate enough stack for the
largest call in the whole function. The runtime saves CSRs for the
funclet. It doesn't restore CSRs after we finally transfer control back
to the parent funciton via a CATCHRET, but that's a separate issue.
32-bit funclets also have to adjust the incoming EBP value, which is
what llvm.x86.seh.recoverframe does in the old model.
64-bit funclets need to spill CSRs as normal. For simplicity, this just
spills the same set of CSRs as the parent function, rather than trying
to compute different CSR sets for the parent function and each funclet.
64-bit funclets also allocate enough stack space for the largest
outgoing call frame, like 32-bit.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12546
llvm-svn: 247092
Adds vcc to output string input for e32. Allows option
of using e64 encoding with assembler.
Also fixes these instructions not implicitly reading exec.
llvm-svn: 247074
The pass is needed to remove __nvvm_reflect calls when we link in
libdevice bitcode that comes with CUDA.
Differential Revision: http://reviews.llvm.org/D11663
llvm-svn: 247072
Summary: This patch modifies X86TargetLowering::LowerVASTART so that
struct va_list is initialized with 32 bit pointers in x32. It also
includes tests that call @llvm.va_start() for x32.
Patch by João Porto
Subscribers: llvm-commits, hjl.tools
Differential Revision: http://reviews.llvm.org/D12346
llvm-svn: 247069
This allows backends which don't use a traditional register allocator,
but do need PHI lowering and other passes, to use the default
TargetPassConfig::addFastRegAlloc and
TargetPassConfig::addOptimizedRegAlloc implementations.
Differential Revision: http://reviews.llvm.org/D12691
llvm-svn: 247065
Cong Hou