This was regressed in r252656 which wasn't quite NFC. Instead of using a
custom instruction as before, use a pattern to select CONST_I32 for the
global addrs.
Differential Revision: http://reviews.llvm.org/D14587
llvm-svn: 253276
Useful utility function; this wasn't too hard to do before, but also wasn't
obviously discoverable. Make it explicit. Reviewed offline by Michael
Gottesman.
llvm-svn: 253254
In r253126 we stopped to recompute LCSSA after loop unrolling in all
cases, except the unrolling is full and at least one of the loop exits
is outside the parent loop. In other cases the transformation should not
break LCSSA, but it turned out, that we also call SimplifyLoop on the
parent loop, which might break LCSSA by itself. This fix just triggers
LCSSA recomputation in this case as well.
I'm committing it without a test case for now, but I'll try to invent
one. It's a bit tricky because in an isolated test LoopSimplify would
be scheduled before LoopUnroll, and thus will change the test and hide
the problem.
llvm-svn: 253253
Summary:
Previously return type information for a function was derived from
return dag nodes. But this didn't work for dags with != return node. So
instead compute it directly from the LLVM function as is done for imports.
Differential Revision: http://reviews.llvm.org/D14593
llvm-svn: 253251
Summary: This is to match the new version in the spec
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D14519
llvm-svn: 253249
On top of that, don't bother allocating and initializing UnwindHelp if
we don't have any funclets. Currently we always use RBP as our frame
pointer when funclets are present, so this change makes it impossible to
come here without any fixed stack objects.
Fixes PR25533.
llvm-svn: 253245
We sometimes create intermediate subtract instructions during
reassociation. Adding these to the worklist to revisit exposes many
additional reassociation opportunities.
Patch by Aditya Nandakumar.
llvm-svn: 253240
We tried to move the insertion point beyond instructions like landingpad
and cleanuppad.
However, we *also* tried to move past catchpad. This is problematic
because catchpad is also a terminator.
This fixes PR25541.
llvm-svn: 253238
Function ARMConstantIslands::doInitialJumpTablePlacement() iterates over all
basic blocks in a machine function. It calls `MI = MBB.getLastNonDebugInstr()`
to get the last instruction in each block and then uses MI->getOpcode() to
decide what to do. If getLastNonDebugInstr() returns MBB.end() (for example,
when the block does not contain any instructions) then calling getOpcode() on
this value is incorrect. Avoid this problem by checking the result of
getLastNonDebugInstr().
Differential Revision: http://reviews.llvm.org/D14694
llvm-svn: 253222
Storing the source location of the expression that created a constant pool
entry allows us to emit better error messages if we later discover that the
expression cannot be represented by a relocation.
Differential Revision: http://reviews.llvm.org/D14646
llvm-svn: 253220
The MCValue class can store a SMLoc to allow better error messages to be
emitted if an error is detected after parsing. The ARM and AArch64 assembly
parsers were not setting this, so error messages did not have source
information.
Differential Revision: http://reviews.llvm.org/D14645
llvm-svn: 253219
Summary:
* ARMv6KZ is the "canonical" name, given in the ARMARM
* ARMv6Z is an "official abbreviation" for it, mentioned in the ARMARM
* ARMv6ZK is a popular misspelling, which we should support as an alias.
The patch corrects the handling of the names.
Functional changes:
* ARMv6Z no longer treated as an architecture in its own right
* ARMv6ZK renamed to ARMv6KZ, accepting ARMv6ZK as an alias
* arm1176jz-s and arm1176jzf-s recognized as ARMv6ZK, instead of ARMv6K
* default ARMv6K CPU changed to arm1176j-s
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14568
llvm-svn: 253206
Summary:
* declare FPUNames, ARCHNames, ARCHExtNames, HWDivNames, CPUNames
as static const
* implement getDefaultExtensions with a StringSwitch, in the same
way getDefaultFPU is implemented
Reviewers: rengolin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14648
llvm-svn: 253201
Instead of defaulting to an empty string, we want to default to
the CPU 'generic' in the case of no valid default CPU being found,
(as long as the architecture is actually valid).
In order to do this we add a default FPU for each architecture, as
well as falling back to architecture defaults for extensions and FPU
in the case of a generic CPU is specified.
llvm-svn: 253198
This allows for accurate architecture targeting as well as removing
duplicate information (hardcoded feature strings) from MCTargetDesc.
llvm-svn: 253196
This was left implicit and never ever checked, which means we could have a CMPZ against some non-zero value and we were carrying on with BFI conversion regardless.
Caught by Oliver Stannard using csmith; regression test added.
llvm-svn: 253195
Summary:
This fails a check in Verifier.cpp, which checks for location matches between the declared
variable and the !dbg attachments.
Reviewers: dnovillo, dblaikie, danielcdh
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14657
llvm-svn: 253194
The AArch64 assembler was silently ignoring instructions like this:
ldr foo, =bar
AArch64AsmParser::parseOperand was returning true as the parse failed, but was
not calling AArch64AsmParser::Error to report this to the user, so the
instruction was ignored without printing an error message.
Differential Revision: http://reviews.llvm.org/D14651
llvm-svn: 253193
Address Duncan Exon Smith's comments on D14148, which was added after the patch had been LGTM'd and committed:
* clang-format one area where whitespace diffs occurred.
* Add a threshold to limit the store/load dominance checks as they are quadratic.
llvm-svn: 253192
Summary: Since we're passing references to dbg.value as pointers,
we need to have the frontend properly declare their sizes and
alignments (as it already does for regular pointers) in preparation
for my upcoming patch to have the verifer check that the sizes agree.
Also augment the backend logic that skips actually emitting this
information into DWARF such that it also handles reference types.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14275
llvm-svn: 253186
Summary: The Old personality function gets copied over, but the
Materializer didn't have a chance to inspect it (e.g. to fix up
references to the correct module for the target function).
Also add a verifier check that makes sure the personality routine
is in the same module as the function whose personality it is.
Reviewers: majnemer
Subscribers: jevinskie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14474
llvm-svn: 253183
Summary: Moving landingpads into successor basic blocks makes the
verifier sad. Teach Sink that much like PHI nodes and terminator
instructions, landingpads (and cleanuppads, etc.) may not be moved
between basic blocks.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14475
llvm-svn: 253182
Summary:
The patch to move metadata linking after global value linking didn't
correctly map unmaterialized global values to null as desired. They
were in fact mapped to the source copy. It largely worked by accident
since most module linker clients destroyed the source module which
caused the source GVs to be replaced by null, but caused a failure with
LTO linking on Windows:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312869.html
The problem is that a null return value from materializeValueFor is
handled by mapping the value to self. This is the desired behavior when
materializeValueFor is passed a non-GlobalValue. The problem is how to
distinguish that case from the case where we really do want to map to
null.
This patch addresses this by passing in a new flag to the value mapper
indicating that unmapped global values should be mapped to null. Other
Value types are handled as before.
Note that the documented behavior of asserting on unmapped values when
the flag RF_IgnoreMissingValues isn't set is currently disabled with
FIXME notes due to bootstrap failures. I modified these disabled asserts
so when they are eventually enabled again it won't assert for the
unmapped values when the new RF_NullMapMissingGlobalValues flag is set.
I also considered using a callback into the value materializer, but a
flag seemed cleaner given that there are already existing flags.
I also considered modifying materializeValueFor to return the input
value when we want to map to source and then treat a null return
to mean map to null. However, there are other value materializer
subclasses that implement materializeValueFor, and they would all need
to be audited and the return values possibly changed, which seemed
error-prone.
Reviewers: dexonsmith, joker.eph
Subscribers: pcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D14682
llvm-svn: 253170
Global to local demotion can speed up programs that use globals a lot. It is particularly useful with LTO, when the entire call graph is known and most functions have been internalized.
For a global to be demoted, it must only be accessed by one function and that function:
1. Must never recurse directly or indirectly, else the GV would be clobbered.
2. Must never rely on the value in GV at the start of the function (apart from the initializer).
GlobalOpt can already do this, but it is hamstrung and only ever tries to demote globals inside "main", because C++ gives extra guarantees about how main is called - once and only once.
In LTO mode, we can often prove the first property (if the function is internal by this point, we know enough about the callgraph to determine if it could possibly recurse). FunctionAttrs now infers the "norecurse" attribute for this reason.
The second property can be proven for a subset of functions by proving that all loads from GV are dominated by a store to GV. This is conservative in the name of compile time - this only requires a DominatorTree which is fairly cheap in the grand scheme of things. We could do more fancy stuff with MemoryDependenceAnalysis too to catch more cases but this appears to catch most of the useful ones in my testing.
llvm-svn: 253168
The current implementation of GEP visitor in InstCombine fails with assertion on Vector GEP with mix of scalar and vector types, like this:
getelementptr double, double* %a, <8 x i32> %i
(It fails to create a "sext" from <8 x i32> to <8 x i64>)
I fixed it and added some tests.
Differential Revision: http://reviews.llvm.org/D14485
llvm-svn: 253162
Summary:
There are currently two blocks with the METADATA_BLOCK id at module
scope. The first has the module-level metadata values (consisting of
some combination of METADATA_* record codes except for METADATA_KIND).
The second consists only of METADATA_KIND records. The latter is used
only in the METADATA_ATTACHMENT block within function blocks (for
metadata attached to instructions).
For ThinLTO we want to delay the parsing of module level metadata
until all functions have been imported from that module (there is some
bookkeeping used to suture it up when we read it during a post-pass).
However, we do need the METADATA_KIND records when parsing the function
body during importing, since those kinds are used as described above.
To simplify identification and parsing of just the block containing
the metadata kinds, use a different block id (METADATA_KIND_BLOCK_ID).
Support older bitcode without the new block id as well.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14654
llvm-svn: 253154
MCRelaxableFragment previously kept a copy of MCSubtargetInfo and
MCInst to enable re-encoding the MCInst later during relaxation. A copy
of MCSubtargetInfo (instead of a reference or pointer) was needed
because the feature bits could be modified by the parser.
This commit replaces the MCSubtargetInfo copy in MCRelaxableFragment
with a constant reference to MCSubtargetInfo. The copies of
MCSubtargetInfo are kept in MCContext, and the target parsers are now
responsible for asking MCContext to provide a copy whenever the feature
bits of MCSubtargetInfo have to be toggled.
With this patch, I saw a 4% reduction in peak memory usage when I
compiled verify-uselistorder.lto.bc using llc.
rdar://problem/21736951
Differential Revision: http://reviews.llvm.org/D14346
llvm-svn: 253127
Summary:
Currently we always recompute LCSSA for outer loops after unrolling an
inner loop. That leads to compile time problem when we have big loop
nests, and we can solve it by avoiding unnecessary work. For instance,
if w eonly do partial unrolling, we don't break LCSSA, so we don't need
to rebuild it. Also, if all exits from the inner loop are inside the
enclosing loop, then complete unrolling won't break LCSSA either.
I replaced unconditional LCSSA recomputation with conditional recomputation +
unconditional assert and added several tests, which were failing when I
experimented with it.
Soon I plan to follow up with a similar patch for recalculation of dominators
tree.
Reviewers: hfinkel, dexonsmith, bogner, joker.eph, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14526
llvm-svn: 253126
MCSubtargetInfo in the subclasses into MCTargetAsmParser and define a
member function getSTI.
This is done in preparation for making changes to shrink the size of
MCRelaxableFragment. (see http://reviews.llvm.org/D14346).
llvm-svn: 253124
attribute.
Even if the target supports shrink-wrapping, the prologue and epilogue
must not move because a crash can happen anywhere and sanitizers need
to be able to unwind from the PC of the crash.
llvm-svn: 253116
Darwin reserves x18, so it's never ABI compliant to generate code that
uses it. Set the default value based on the OS part of the triple
rather than forcing front-ends to set the +reserve-x18 target feature
in order to build correct code for Darwin.
This will make r243310 redundant, so I'll revert that shortly.
llvm-svn: 253102
This allows us to transform the below loop into a memcpy.
void test(unsigned *__restrict__ a, unsigned *__restrict__ b) {
for (int i = 2047; i >= 0; --i) {
a[i] = b[i];
}
}
This is the memcpy version of r251518, which added support for memset with
negative strided loops.
llvm-svn: 253091
The C++ EH personality automatically restores ESP from the C++ EH
registration node after a catchret. I mistakenly thought it was like
SEH, which does not restore ESP.
It makes sense for C++ EH to differ from SEH here because SEH does not
use funclets for catches, and does not allow catching inside of finally.
C++ EH may need to unwind through multiple catch funclets and eventually
catchret to some outer funclet. Therefore, the runtime has to keep track
of which ESP to use with catchret, rather than having the compiler
reload it manually.
llvm-svn: 253084
Use ScalarEvolution to calculate memory access bounds.
Handle function calls based on readnone/nocapture attributes.
Handle memory intrinsics with constant size.
This change improves both recall and precision of IsAllocaSafe.
See the new tests (ex. BitCastWide) for the kind of code that was wrongly
classified as safe.
SCEV efficiency seems to be limited by the fact the SafeStack runs late
(in CodeGenPrepare), and many loops are unrolled or otherwise not in LCSSA.
llvm-svn: 253083
This patch is enabling combining UNPCKL with vector_shuffle that moves the upper
half of a vector into the lower half, into a UNPCKH instruction. For example:
t2: v16i8 = vector_shuffle<8,9,10,11,12,13,14,15,u,u,u,u,u,u,u,u> t1, undef:v16i8
t3: v16i8 = X86ISD::UNPCKL undef:v16i8, t2
will be combined to:
t3: v16i8 = X86ISD::UNPCKH undef:v16i8, t1
Differential revision: http://reviews.llvm.org/D14399
llvm-svn: 253067
This is a recommit of 252842 which was reverted in 252859. The issue was
using %s format specifier for a StringRef - used Format's
left_justify(StringRef, int) instead.
It'd be nice to have __attribute__((format(..))) on llvm::format, but
apparently it's only implemented for c-style variadics, not C++ variadic
templates. Perhaps we could fix that & conditionalize the attribute on
such...
llvm-svn: 253065
Summary:
PE files are stripped by default, and only contain the names of exported
symbols.
The actual reason that we bother to do this override by default is
actually due to a quirk of the way -gline-tables-only is implemented, so
I phrased the check as "if we are symbolizing from dwarf, do the symtab
override".
This fixes lots of Windows ASan tests that I broke in r250582.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14594
llvm-svn: 253051
Richard Trieu noted that UBSan detected an overflowing shift, and the obvious fix caused a crash.
What was happening was that the shiftee (1U) was indeed too small for the possible range of shifts it had to handle, but also we were using "VT.getSizeInBits()" to get the maximum type bitwidth, but we wanted "VT.getScalarSizeInBits()" to get the vector lane size instead of the entire vector size.
Use an APInt for the shift and VT.getScalarSizeInBits().
llvm-svn: 253023
Summary:
This change addresses two possible instances of user error / confusion when
merging sampled profile data.
Previously any input that didn't match the raw or processed instrumented format
would automatically be interpreted as instrumented profile text format data.
No error would be reported during the merge.
Example:
If foo-sampled.profdata and bar-sampled.profdata are binary sampled profiles:
Old behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -output foobar-sampled.profdata
$ llvm-profdata show -sample foobar-sampled.profdata
error: foobar-sampled.profdata:1: Expected 'mangled_name:NUM:NUM', found lprofi
This change adds basic checks for valid input data when assuming text input.
It also makes error messages related to file format validity more specific about
the assumbed profile data type.
New behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -o foobar-sampled.profdata
error: foo.profdata: Unrecognized instrumentation profile encoding format
Perhaps you forgot to use the -sample option?
Reviewers: bogner, davidxl, dnovillo
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14558
llvm-svn: 253009
This reapplies r252949. I've changed the type of FuncName to be
std::string instead of StringRef in emitFnAttrCompatCheck.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252990
This arranges the types in the LLVM instruction names in the same order that
they appear in the WebAssembly opcode names, and eliminates
double-underscores.
llvm-svn: 252988
Summary:
The value that the CoreCLR personality passes to a funclet for the
establisher frame may be the root function's frame or may be the parent
funclet's (mostly empty) frame in the case of nested funclets. Each
funclet stores a pointer to the root frame in its own (mostly empty)
frame, as does the root function itself. All frames allocate this slot at
the same offset, measured from the post-prolog stack pointer, so that the
same sequence can accept any ancestor as an establisher frame parameter
value, and so that a single offset can be reported to the GC, which also
looks at this slot.
This change allocate the slot when processing function entry, and records
its frame index on the WinEHFuncInfo object, then inserts the code to
set/copy it during prolog emission.
Reviewers: majnemer, AndyAyers, pgavlin, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14614
llvm-svn: 252983
It made it possible to apply the memory folding optimization for the 2nd
operand of FMA*_Int instructions.
Reviewer: Quentin Colombet
Differential Revision: http://reviews.llvm.org/D14550
llvm-svn: 252973
This reverts commit r252565.
This also includes the revert of the commit mentioned below in order to
avoid breaking tests in AMDGPU:
Revert "AMDGPU: Set isAllocatable = 0 on VS_32/VS_64"
This reverts commit r252674.
llvm-svn: 252956
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252949
r243347 was intended to support a change to LSR (r243348). That change
to LSR has since had to be reverted (r243939) because it was buggy, and
now the code added in r243347 is untested and unexercised. Given that,
I think it is appropriate to revert r243347 for now, with the intent of
adding it back in later if I get around to checking in a fixed version
of r243348.
llvm-svn: 252948
ShrinkWrapping does not understand exception handling constraints for now, so
make sure we do not mess with them by aborting on functions that use EH
funclets.
llvm-svn: 252917
Summary:
This change addresses two possible instances of user error / confusion when
merging sampled profile data.
Previously any input that didn't match the raw or processed instrumented format
would automatically be interpreted as instrumented profile text format data.
No error would be reported during the merge.
Example:
If foo-sampled.profdata and bar-sampled.profdata are binary sampled profiles:
Old behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -output foobar-sampled.profdata
$ llvm-profdata show -sample foobar-sampled.profdata
error: foobar-sampled.profdata:1: Expected 'mangled_name:NUM:NUM', found lprofi
This change adds basic checks for valid input data when assuming text input.
It also makes error messages related to file format validity more specific about
the assumbed profile data type.
New behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -o foobar-sampled.profdata
error: foo.profdata: Unrecognized instrumentation profile encoding format
Perhaps you forgot to use the -sample option?
Reviewers: bogner, davidxl, dnovillo
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14558
llvm-svn: 252916
Switch to MC for instruction printing.
This encompasses several changes which are all interconnected:
- Use the MC framework for printing almost all instructions.
- AsmStrings are now live.
- This introduces an indirection between LLVM vregs and WebAssembly registers,
and a new pass, WebAssemblyRegNumbering, for computing a basic the mapping.
This addresses some basic issues with argument registers and unused registers.
- The way ARGUMENT instructions are handled no longer generates redundant
get_local+set_local for every argument.
This also changes the assembly syntax somewhat; most notably, MC's printing
does not use sigils on label names, so those are no longer present, and
push/pop now have a sigil to keep them unambiguous.
The usage of set_local/get_local/$push/$pop will continue to evolve
significantly. This patch is just one step of a larger change.
llvm-svn: 252910
LLVM Missing the following instructions: fadd\fdiv\fmul\fsub\fsubr\fdivr.
GAS and MS supporting this instruction and lowering them in to a faddp\fdivp\fmulp\fsubp\fsubrp\fdivrp instructions.
Differential Revision: http://reviews.llvm.org/D14217
llvm-svn: 252908
Summary:
This patch changes ARMV5, ARMV5E, ARMV6SM, ARMV6HL, ARMV7, ARMV7L,
ARMV7HL, ARMV7EM to be treated as aliases for the corresponding
standard architectures, instead of as actual architectures.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14577
llvm-svn: 252903
I completely misunderstood what ARMISD::CMPZ means. It's not "compare equal to zero", it's "compare, only setting the zero/Z flag". It can either be equal-to-zero or not-equal-to-zero, and we weren't checking what sense it was.
If it's equal-to-zero, we can swap the operands around and pretend like it is not-equal-to-zero, which is both a bug fix and lets us handle more cases.
llvm-svn: 252891
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
llvm-svn: 252888
Summary:
This patch overrides TargetFrameLowering::getFrameIndexReference() in order to
specify the correct register when the function needs dynamic stack realignment.
The values returned from this function are used in order to create DW_AT_locations
for DWARF info. These locations would use the wrong registers as it's been
reported in PR25028.
Reviewers: dsanders
Subscribers: dean, llvm-commits
Differential Revision: http://reviews.llvm.org/D13511
llvm-svn: 252882
There are plenty more instcombines we could probably do with bitreverse, but this seems like a very obvious and trivial starting point and was brought up by Hal in his review.
llvm-svn: 252879
Several backends have instructions to reverse the order of bits in an integer. Conceptually matching such patterns is similar to @llvm.bswap, and it was mentioned in http://reviews.llvm.org/D14234 that it would be best if these patterns were matched in InstCombine instead of reimplemented in every different target.
This patch introduces an intrinsic @llvm.bitreverse.i* that operates similarly to @llvm.bswap. For plumbing purposes there is also a new ISD node ISD::BITREVERSE, with simple expansion and promotion support.
The intention is that InstCombine's BSWAP detection logic will be extended to support BITREVERSE too, and @llvm.bitreverse intrinsics emitted (if the backend supports lowering it efficiently).
llvm-svn: 252878
In `MachOObjectFile::getSymbolType` we currently always return `SymbolRef::ST_Function` for symbols from any section. In order for llvm-symbolizer to correctly symbolize Mach-O globals, symbols from data and BSS sections should return `SymbolRef::ST_Data`.
Differential Revision: http://reviews.llvm.org/D14576
llvm-svn: 252867
Added "macro" option to "-debug-dump" flag, which trigger parsing and dumping of the ".debug_macinfo" section.
Differential Revision: http://reviews.llvm.org/D14294
llvm-svn: 252866
This adds part of the target info code, and adds modifications to
the build scripts so that AVR is recognized a supported, experimental
backend.
It does not include any AVR-specific code, just the bare sources required
for a backend to exist.
From D14039.
llvm-svn: 252865
A function can be marked as norecurse if:
* The SCC to which it belongs has cardinality 1; and either
a) It does not call any non-norecurse function. This includes self-recursion; or
b) It only has one callsite and the function that callsite is within is marked norecurse.
a) is best propagated bottom-up and b) is best propagated top-down.
We build up the norecurse attributes bottom-up using the existing SCC pass, and mark functions with no obvious recursion (but not provably norecurse) to sweep later, top-down.
llvm-svn: 252862
This encompasses several changes which are all interconnected:
- Use the MC framework for printing almost all instructions.
- AsmStrings are now live.
- This introduces an indirection between LLVM vregs and WebAssembly registers,
and a new pass, WebAssemblyRegNumbering, for computing a basic the mapping.
This addresses some basic issues with argument registers and unused registers.
- The way ARGUMENT instructions are handled no longer generates redundant
get_local+set_local for every argument.
This also changes the assembly syntax somewhat; most notably, MC's printing
use sigils on label names, so those are no longer present, and push/pop now
have a sigil to keep them unambiguous.
The usage of set_local/get_local/$push/$pop will continue to evolve
significantly. This patch is just one step of a larger change.
llvm-svn: 252858
Summary:
The option outputs statistics in CSV format preceded by 1 header line.
This is intended for machine processing of the output.
-verbosity=0 should likely be set.
Differential Revision: http://reviews.llvm.org/D14600
llvm-svn: 252856
- Factor out code to query and modify the sign bit of a floatingpoint
value as an integer. This also works if none of the targets integer
types is big enough to hold all bits of the floatingpoint value.
- Legalize FABS(x) as FCOPYSIGN(x, 0.0) if FCOPYSIGN is available,
otherwise perform bit manipulation on the sign bit. The previous code
used "x >u 0 ? x : -x" which is incorrect for x being -0.0! It also
takes 34 instructions on ARM Cortex-M4. With this patch we only
require 5:
vldr d0, LCPI0_0
vmov r2, r3, d0
lsrs r2, r3, #31
bfi r1, r2, #31, #1
bx lr
(This could be further improved if the compiler would recognize that
r2, r3 is zero).
- Only lower FCOPYSIGN(x, y) = sign(x) ? -FABS(x) : FABS(x) if FABS is
available otherwise perform bit manipulation on the sign bit.
- Perform the sign(x) test by masking out the sign bit and comparing
with 0 rather than shifting the sign bit to the highest position and
testing for "<s 0". For x86 copysignl (on 80bit values) this gets us:
testl $32768, %eax
rather than:
shlq $48, %rax
sets %al
testb %al, %al
Differential Revision: http://reviews.llvm.org/D11172
llvm-svn: 252839
First create a list of candidates, then transform. This simplifies the code in
that you have don't have to worry that you may be using an invalidated
iterator.
Previously, each time we created a memset/memcpy we would reevaluate the entire
loop potentially resulting in lots of redundant work for large basic blocks.
llvm-svn: 252817
When working with tokens, it is often the case that one has instructions
which consume a token and produce a new token. Currently, we have no
mechanism to represent an initial token state.
Instead, we can create a notional "empty token" by inventing a new
constant which captures the semantics we would like. This new constant
is called ConstantTokenNone and is written textually as "token none".
Differential Revision: http://reviews.llvm.org/D14581
llvm-svn: 252811
Summary:
This change introduces the notion of "deoptimization" operand bundles.
LLVM can recognize and optimize these in more precise ways than it can a
generic "unknown" operand bundles.
The current form of this special recognition / optimization is an enum
entry in LLVMContext, a LangRef blurb and a verifier rule. Over time we
will teach LLVM to do more aggressive optimization around deoptimization
operand bundles, exploiting known facts about kinds of state
deoptimization operand bundles are allowed to track.
Reviewers: reames, majnemer, chandlerc, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14551
llvm-svn: 252806
This is a step towards consolidating some of the information regarding
attributes in a single place.
This patch moves the enum attributes in Attributes.h to the table-gen
file. Additionally, it adds definitions of target independent string
attributes that will be used in follow-up commits by the inliner to
check attribute compatibility.
rdar://problem/19836465
llvm-svn: 252796
This is a follow-up from the previous discussion on the thread:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151019/307763.html
The LibLTO lto_get_error_message() API reads error messages from a std::string
sLastErrorString. Instead of passing this string around as an argument, this
patch creates a diagnostic handler and then sends this handler to the
constructor of LTOCodeGenerator.
Differential Revision: http://reviews.llvm.org/D14313
llvm-svn: 252791
Summary:
Don't fold
(zext (and (load x), cst)) -> (and (zextload x), (zext cst))
if
(and (load x) cst)
will match as a zextload already and has additional users.
For example, the following IR:
%load = load i32, i32* %ptr, align 8
%load16 = and i32 %load, 65535
%load64 = zext i32 %load16 to i64
store i32 %load16, i32* %dst1, align 4
store i64 %load64, i64* %dst2, align 8
used to produce the following aarch64 code:
ldr w8, [x0]
and w9, w8, #0xffff
and x8, x8, #0xffff
str w9, [x1]
str x8, [x2]
but with this change produces the following aarch64 code:
ldrh w8, [x0]
str w8, [x1]
str x8, [x2]
Reviewers: resistor, mcrosier
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14340
llvm-svn: 252789
Summary: Other personalities don't use this special frame slot.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14580
llvm-svn: 252778
This patch adds DWARF values for the Delphi language and Borland C++
language extensions.
Reviewed by: dblaikie
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D14522
llvm-svn: 252776
Summary: Inlined callsites need to be emitted in debug info so that sample profile can be annotated to the correct inlined instance.
Reviewers: dnovillo, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14511
llvm-svn: 252768
The discriminators pass relied on the presence of llvm.dbg.cu to decide
whether to add discriminators, but this fails in the case where debug
info is only enabled partially when -fprofile-sample-use is active.
The reason llvm.dbg.cu is not present in these cases is to prevent
codegen from emitting debug info (as it is only used for the sample
profile pass).
This changes the discriminators pass to also emit discriminators even
when debug info is not being emitted.
llvm-svn: 252763
MIPS32 has instructions for efficient count-leading/trailing-zeros, so this should be
considered a cheap operation (and therefore fair game for speculation) for any MIPS32
implementation.
The net result of allowing this speculation for the regression tests in this patch is
that we get this code:
ctlz:
jr $ra
clz $2, $4
cttz:
addiu $1, $4, -1
not $2, $4
and $1, $2, $1
clz $1, $1
addiu $2, $zero, 32
jr $ra
subu $2, $2, $1
Instead of:
ctlz:
beqz $4, $BB0_2
addiu $2, $zero, 32
clz $2, $4
$BB0_2:
jr $ra
nop
cttz:
beqz $4, $BB1_2
addiu $2, $zero, 32
addiu $1, $4, -1
not $2, $4
and $1, $2, $1
clz $1, $1
addiu $2, $zero, 32
subu $2, $2, $1
$BB1_2:
jr $ra
nop
See D14469 for the larger motivation.
Differential Revision: http://reviews.llvm.org/D14500
llvm-svn: 252755
I missed the side-effects of ParseBFI in my previous attempt (r252748).
Thanks dblaikie for the suggestion of adding a void use of the unused
variable instead.
llvm-svn: 252751
If we have a chain of BFIs, we may be able to combine several together into one merged BFI. We can do this if the "from" bits from one BFI OR'd with the "from" bits from the other BFI form a contiguous range, and the same with the "to" bits.
llvm-svn: 252740
Measurements primarily on AArch64 have shown this feature does not
significantly effect compile-time. The are no significant perf changes in LNT,
but for AArch64 at least, there are wins in third party benchmarks.
As discussed on llvm-dev, we're going to try turning this on by default and see
how other targets react to the change.
llvm-svn: 252733
If possible and profitable, replace lea %reg, 1(%reg) and lea %reg, -1(%reg) with inc %reg and dec %reg respectively.
Patch by: anton.nadolsky@intel.com
Differential Revision: http://reviews.llvm.org/D14059
llvm-svn: 252722
Right now isTruePredicate is only ever called with Pred == ICMP_SLE or
ICMP_ULE, and the ICMP_SLT and ICMP_ULT cases are dead. This change
removes the untested dead code so that the function is not misleading.
llvm-svn: 252676
Summary:
This change teaches isImpliedCondition to prove things like
(A | 15) < L ==> (A | 14) < L
if the low 4 bits of A are known to be zero.
Depends on D14391
Reviewers: majnemer, reames, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14392
llvm-svn: 252673
This change would add functionality if isImpliedCondition worked on
vector types; but since it bail out on vector predicates this change is
an NFC.
llvm-svn: 252672
This patch adds a pass for doing PowerPC peephole optimizations at the
MI level while the code is still in SSA form. This allows for easy
modifications to the instructions while depending on a subsequent pass
of DCE. Both passes are very fast due to the characteristics of SSA.
At this time, the only peepholes added are for cleaning up various
redundancies involving the XXPERMDI instruction. However, I would
expect this will be a useful place to add more peepholes for
inefficiencies generated during instruction selection. The pass is
placed after VSX swap optimization, as it is best to let that pass
remove unnecessary swaps before performing any remaining clean-ups.
The utility of these clean-ups are demonstrated by changes to four
existing test cases, all of which now have tighter expected code
generation. I've also added Eric Schweiz's bugpoint-reduced test from
PR25157, for which we now generate tight code. One other test started
failing for me, and I've fixed it
(test/Transforms/PlaceSafepoints/finite-loops.ll) as well; this is not
related to my changes, and I'm not sure why it works before and not
after. The problem is that the CHECK-NOT: of "statepoint" from test1
fails because of the "statepoint" in test2, and so forth. Adding a
CHECK-LABEL in between keeps the different occurrences of that string
properly scoped.
llvm-svn: 252651
Summary:
The module linker lazy links some "discardable if unused" global
values (e.g. linkonce), materializing and linking them only
if they are referenced in the module. If a comdat group contains a
linkonce member that is not referenced, however, it would not be
materialized and linked, leading to an incomplete comdat group.
If there are other object files not part of the same LTO link that also
define and use that comdat group, the linker may select the incomplete
group leading to link time unsats.
To solve this, whenever a global value body is linked, make sure we
materialize any other members of the same comdat group that are not yet
materialized. This ensures they are in the lazy link list and get linked
as well.
Added new test and adjusted old test to remove parts that didn't
make sense with fix.
Reviewers: rafael
Subscribers: dexonsmith, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14516
llvm-svn: 252647
This was an omission in the patch that landed initial support for
operand bundles. So far we haven't hit this, but we will once the
inliner is able to inline calls to functions that contain calls with
operand bundles.
llvm-svn: 252645
ARM V6T2 has instructions for efficient count-leading/trailing-zeros, so this should be
considered a cheap operation (and therefore fair game for speculation) for any ARM V6T2
implementation.
The net result of allowing this speculation for the regression tests in this patch is
that we get this code:
ctlz:
clz r0, r0
bx lr
cttz:
rbit r0, r0
clz r0, r0
bx lr
Instead of:
ctlz:
cmp r0, #0
moveq r0, #32
clzne r0, r0
bx lr
cttz:
cmp r0, #0
moveq r0, #32
rbitne r0, r0
clzne r0, r0
bx lr
This will help solve a general speculation/despeculation problem noted in PR24818:
https://llvm.org/bugs/show_bug.cgi?id=24818
Differential Revision: http://reviews.llvm.org/D14469
llvm-svn: 252639
This allows avoiding the default Expand behavior which
introduces stack usage. Bitcast the scalar and replace
the missing elements with undef.
This is covered by existing tests and used by a future
commit which makes 64-bit vectors legal types on AMDGPU.
llvm-svn: 252632
This is for AMDGPU to implement v2i64 extract as extract of
half of a v4i32.
This is covered by existing tests and used by a future
commit which makes 64-bit vectors legal types on AMDGPU.
llvm-svn: 252630
This is a cleaned up version of a patch by John Regehr with permission. Originally found via the souper tool.
If we add an odd number to x, then bitwise-and the result with x, we know that the low bit of the result must be zero. Either it was zero in x originally, or the add cleared it in the temporary value. As a result, one of the two values anded together must have the bit cleared.
Differential Revision: http://reviews.llvm.org/D14315
llvm-svn: 252629
Ensure WeakAny variables are imported as ExternalWeak declarations. To
handle WeakAny more consistently and fix this issue:
1) Update helper doImportAsDefinition to properly flag WeakAny variables
and aliases as not importing defintions.
Update callers of doImportAsDefinition to remove now redundant checks for
WeakAny aliases, or ignore aliases, as appropriate.
2) Add any !doImportAsDefinition GVs to DoNotLinkFromSource set during
linking of the GV prototype, where we usually add GVs to the
DoNotLinkFromSource set for other reasons.
Remove now unnecessary adding of WeakAny aliases to
DoNotLinkFromSource set from copyGlobalAliasProto.
Remove now unnecessary guard against linking non-imported function
bodies from ModuleLinker::run.
llvm-svn: 252626
AArch64 has instructions for efficient count-leading/trailing-zeros, so this should be
considered a cheap operation (and therefore fair game for speculation) for any AArch64
implementation.
The net result of allowing this speculation for the regression tests in this
patch is that we get this code:
ctlz:
clz w0, w0
ret
cttz:
rbit w8, w0
clz w0, w8
ret
Instead of:
ctlz:
cbz w0, .LBB0_2
clz w0, w0
ret
.LBB0_2:
orr w0, wzr, #0x20
ret
cttz:
cbz w0, .LBB1_2
rbit w8, w0
clz w0, w8
ret
.LBB1_2:
orr w0, wzr, #0x20
ret
See D14469 for the larger motivation.
Differential Revision: http://reviews.llvm.org/D14505
llvm-svn: 252625
This is one of the problems noted in PR25016:
https://llvm.org/bugs/show_bug.cgi?id=25016
and:
http://lists.llvm.org/pipermail/llvm-dev/2015-October/090998.html
The spilling problem is independent and not addressed by this patch.
The MachineCombiner was doing reassociations that don't improve or even worsen the critical path.
This is caused by inclusion of the "slack" factor when calculating the critical path of the original
code sequence. If we don't add that, then we have a more conservative cost comparison of the old code
sequence vs. a new sequence. The more liberal calculation must be preserved, however, for the AArch64
MULADD patterns because benchmark regressions were observed without that.
The two failing test cases now have identical asm that does what we want:
a + b + c + d ---> (a + b) + (c + d)
Differential Revision: http://reviews.llvm.org/D13417
llvm-svn: 252616
Added fixes for stage2 failures: CMOV is not commutable; commuting the operands results in the condition being flipped! d'oh!
Original commit message:
If we have a CMOV, OR and AND combination such as:
if (x & CN)
y |= CM;
And:
* CN is a single bit;
* All bits covered by CM are known zero in y;
Then we can convert this to a sequence of BFI instructions. This will always be a win if CM is a single bit, will always be no worse than the TST & OR sequence if CM is two bits, and for thumb will be no worse if CM is three bits (due to the extra IT instruction).
llvm-svn: 252606
This is fix for PR24059.
When we are hoisting instruction above some condition it may turn out
that metadata on this instruction was control dependant on the condition.
This metadata becomes invalid and we need to drop it.
This patch should cover most obvious places of speculative execution (which
I have found by greping isSafeToSpeculativelyExecute). I think there are more
cases but at least this change covers the severe ones.
Differential Revision: http://reviews.llvm.org/D14398
llvm-svn: 252604
For big-endian targets, when we merge two halfword loads into a word load, the
order of the halfwords in the loaded value is reversed compared to
little-endian, so the load-store optimiser needs to swap the destination
registers.
This does not affect merging of two word loads, as we use ldp, which treats the
memory as two separate 32-bit words.
llvm-svn: 252597
For CoreCLR on Windows, stack probes must be emitted as inline sequences that probe successive stack pages
between the current stack limit and the desired new stack pointer location. This implements support for
the inline expansion on x64.
For in-body alloca probes, expansion is done during instruction lowering. For prolog probes, a stub call
is initially emitted during prolog creation, and expanded after epilog generation, to avoid complications
that arise when introducing new machine basic blocks during prolog and epilog creation.
Added a new test case, modified an existing one to exclude non-x64 coreclr (for now).
Add test case
Fix tests
llvm-svn: 252578
AArch64 has the ability to use the top 8-bits of an "address" for extra
information, with the memory subsystem automatically masking them off for loads
and stores. When that's happening, we can sometimes skip masks on memory
operations in the compiler.
However, this requires the host OS and support stack to preserve those bits so
it can't be enabled everywhere. In principle iOS 8.0 and above do take the
required precautions and but we'll put it under a flag for now.
llvm-svn: 252573
Lower LLVM's 'unreachable' terminator to ISD::TRAP, and lower ISD::TRAP to
wasm's 'unreachable' expression.
WebAssembly type-checks expressions, but a noreturn function with a
return type that doesn't match the context will cause a check
failure. So we lower LLVM 'unreachable' to ISD::TRAP and then lower that
to WebAssembly's 'unreachable' expression, which typechecks in any
context and causes a trap if executed.
Differential Revision: http://reviews.llvm.org/D14515
llvm-svn: 252566
I'm not sure what the point of this was. I'm not sure why
you would ever define an instruction that produces an unallocatable
register class. No tests fail with this removed, and it seems like
it should be a verifier error to define such an instruction.
This was problematic for AMDGPU because it would make bad decisions
by arbitrarily changing the register class when unsetting isAllocatable
for VS_32/VS_64, which is currently set as a workaround to this problem.
AMDGPU uses the VS_32/VS_64 register classes to represent operands which
can use either VGPRs or SGPRs. When isAllocatable is unset for these,
this would need to pick either the SGPR or VGPR class and insert either
a copy we don't want, or an illegal copy we would need to deal with
later. A semi-arbitrary register class ordering decision is made in tablegen,
which resulted in always picking a VGPR class because it happens to have
more registers than the SGPR register class. We really just want to
use whatever register class the original register had.
llvm-svn: 252565
- Make indexed value profile data more compact by peeling out
the per-site value count field into its own smaller sized array.
- Introduced formal data structure definitions to specify value
profile data layout in indexed format. Previously the layout
of the data is only assumed in the client code (scattered in
three different places : size computation, EmitData, and ReadData
- The new data structure serves as a central place for layout documentation.
- Add interfaces to force BE output for value profile data (testing purpose)
- Add byte swap unit tests
Differential Revision: http://reviews.llvm.org/D14401
llvm-svn: 252563
This fixes a bug in ARMAsmPrinter::EmitUnwindingInstruction where
llvm_unreachable was reached because t2ADDri wasn't handled.
Test case provided by Tim Northover.
rdar://problem/23270609
http://reviews.llvm.org/D14518
llvm-svn: 252557
Simply perform additional report_context() calls after a report()
instead of adding more and more overloaded variations of report(). Also
improve several instances where information was output in an ad-hoc way
probably because no matching report() overload was available.
llvm-svn: 252552
This is a prerequisite for further optimisations of these functions,
which will be commited as a separate patch.
Differential Revision: http://reviews.llvm.org/D14219
llvm-svn: 252535
The motivation for this patch starts with the epic fail example in PR18007:
https://llvm.org/bugs/show_bug.cgi?id=18007
...unfortunately, this patch makes no difference for that case, but it solves some
simpler cases. We'll get there some day. :)
The current 'or' matching code was using computeKnownBits() via
isBaseWithConstantOffset() -> MaskedValueIsZero(), but that's an unnecessarily limited use.
We can do more by copying the logic in ValueTracking's haveNoCommonBitsSet(), so we can
treat the 'or' as if it was an 'add'.
There's a TODO comment here because we should lift the bit-checking logic into a helper
function, so it's not duplicated in DAGCombiner.
An example of the better LEA matching:
leal (%rdi,%rdi), %eax
andl $1, %esi
orl %esi, %eax
Becomes:
andl $1, %esi
leal (%rsi,%rdi,2), %eax
Differential Revision: http://reviews.llvm.org/D13956
llvm-svn: 252515
For some reason we'd never run MachineVerifier on WinEH code, and you
explicitly have to ask for it with llc. I added it to a few test cases
to get some coverage.
Fixes PR25461.
llvm-svn: 252512
This patch makes ASAN for aarch64 use the same shadow offset for all
currently supported VMAs (39 and 42 bits). The shadow offset is the
same for 39-bit (36). Similar to ppc64 port, aarch64 transformation
also requires to use an add instead of 'or' for 42-bit VMA.
llvm-svn: 252495
Summary: Call instructions that are from the same line and same basic block needs to have separate discriminators to distinguish between different callsites.
Reviewers: davidxl, dnovillo, dblaikie
Subscribers: dblaikie, probinson, llvm-commits
Differential Revision: http://reviews.llvm.org/D14464
llvm-svn: 252492
When GlobalOpt splits an internal, global variable with an aggregate type, it
should propagate the externally_initialized flag to the newly created globals.
This makes the pass safe for our downstream use of this flag, while still
allowing some useful optimisations (such as removing dead parts of the split
aggregate) to be performed.
Differential Revision: http://reviews.llvm.org/D13382
llvm-svn: 252490
Implemented as many of Michael's suggestions as were possible:
* clang-format the added code while it is still fresh.
* tried to change Value* to Instruction* in many places in computeMinimumValueSizes - unfortunately there are several places where Constants need to be handled so this wasn't possible.
* Reduce the pass list on loop-vectorization-factors.ll.
* Fix a bug where we were querying MinBWs for I->getOperand(0) but using MinBWs[I].
llvm-svn: 252469
Summary:
LAA currently generates a set of SCEV predicates that must be checked by users.
In the case of Loop Distribute/Loop Load Elimination, no such predicates could have
been emitted, since we don't allow stride versioning. However, in the future there
could be SCEV predicates that will need to be checked.
This change adds support for SCEV predicate versioning in the Loop Distribute, Loop
Load Eliminate and the loop versioning infrastructure.
Reviewers: anemet
Subscribers: mssimpso, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14240
llvm-svn: 252467
Summary:
This matches the sum-of-absdiff patterns emitted by the vectoriser using log2 shuffles.
Relies on D14207 to be able to match the `extract_subvector(..., 0)`
Reviewers: t.p.northover, jmolloy
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14208
llvm-svn: 252465
Summary:
Lowering this pattern early to an `EXTRACT_SUBREG` was making it impossible to match larger patterns in tblgen that use `extract_subvector(..., 0)` as part of the their input pattern.
It seems like there will exist somewhere a better way of specifying this pattern over all relevant register value types, but I didn't manage to find it.
Reviewers: t.p.northover, jmolloy
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14207
llvm-svn: 252464
"GCC requires the freestanding environment provide memcpy, memmove, memset
and memcmp": https://gcc.gnu.org/onlinedocs/gcc-5.2.0/gcc/Standards.html
Hence in GNUEABI targets LLVM should not convert 'memops' to their equivalent
'__aeabi_memops'. This convertion violates GCC contract.
The -meabi flag controls whether or not LLVM will modify 'memops' in GNUEABI
targets.
Without -meabi: use the triple default EABI.
With -meabi=default: use the triple default EABI.
With -meabi=gnu: use 'memops'.
With -meabi=4 or -meabi=5: use '__aeabi_memops'.
With -meabi set to an unknown value: same as -meabi=default.
Patch by Vinicius Tinti.
llvm-svn: 252462
We don't currently have any runtime library functions for operations on
f16 values (other than conversions to and from f32 and f64), so we
should always promote it to f32, even if that is not a legal type. In
that case, the f32 values would be softened to f32 library calls.
SoftenFloatRes_FP_EXTEND now needs to check the promoted operand's type,
as it may ne a no-op or require a different library call.
getCopyFromParts and getCopyToParts now need to cope with a
floating-point value stored in a larger integer part, as is the case for
any target that needs to store an f16 value in a 32-bit integer
register.
Differential Revision: http://reviews.llvm.org/D12856
llvm-svn: 252459
Summary: Mimic parseTriple(); and exposes it to LTOModule.cpp
Reviewers: dexonsmith, rafael
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 252442
llvm/lib/Support/Signals.cpp:66:13: warning: unused function 'printSymbolizedStackTrace' [-Wunused-function]
llvm/lib/Support/Signals.cpp:52:13: warning: function 'findModulesAndOffsets' has internal linkage but is not defined [-Wundefined-internal]
llvm-svn: 252418
Under most circumstances, if SCEV can simplify X-Y to a constant, then it can
also simplify Y-X to a constant. However, there is no guarantee that this is
always true, and concensus is not to consider that a correctness bug in SCEV
(although it is undesirable).
PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and
prefetches) into buckets, where in each bucket the relative pointer offsets are
constant. We used to keep each bucket as a multimap, where SCEV's subtraction
operation was used to define the ordering predicate. Instead, use a fixed SCEV
base expression for each bucket, record the constant offsets from that base
expression, and adjust it later, if desirable, once all pointers have been
collected.
Doing it this way should be more compile-time efficient than the previous
scheme (in addition to making the implementation less sensitive to SCEV
simplification quirks).
Fixes PR25170.
llvm-svn: 252417
The TailDuplication machine pass ran across a malformed CFG: a PHI node
referred it's predecessor's predecessor instead of it's predecessor.
This occurred because we split the edge in X86ISelLowering when we
processed the CATCHRET but forgot to do something about the PHI nodes.
This fixes PR25444.
llvm-svn: 252413
This commit adds enums in LLVMBitCodes.h to improve readability and
maintainability. This is a follow-up to r252368 which was discussed
here:
http://reviews.llvm.org/D12923
llvm-svn: 252395
Summary:
Teach the FunctionAttrs to do the right thing for IR with operand
bundles.
Reviewers: reames, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14408
llvm-svn: 252387
Summary:
This change fixes an iterator wraparound bug in
`determinePointerReadAttrs`.
Ideally, ++'ing off the `end()` of an iplist should result in a failed
assert, but currently iplist seems to silently wrap to the head of the
list on `end()++`. This is why the bad behavior is difficult to
demonstrate.
Reviewers: chandlerc, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14350
llvm-svn: 252386
Summary:
The CLR's personality routine passes these in rdx/edx, not rax/eax.
Make getExceptionPointerRegister a virtual method parameterized by
personality function to allow making this distinction.
Similarly make getExceptionSelectorRegister a virtual method parameterized
by personality function, for symmetry.
Reviewers: pgavlin, majnemer, rnk
Subscribers: jyknight, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14344
llvm-svn: 252383
FoldPHIArgZextsIntoPHI cannot insert an instruction after the PHI if
there is an EHPad in the BB. Doing so would result in an instruction
inserted after a terminator.
llvm-svn: 252377
Some implicit ilist iterator conversions have crept back into Analysis,
Transforms, Hexagon, and llvm-stress. This removes them.
I'll commit a patch immediately after this to disallow them (in a
separate patch so that it's easy to revert if necessary).
llvm-svn: 252371
We tried to insert a cast of a phi in a block whose terminator is an
EHPad. This is invalid. Do not attempt the transform in these
circumstances.
llvm-svn: 252370
This marker prevents optimization passes from adding 'tail' or
'musttail' markers to a call. Is is used to prevent tail call
optimization from being performed on the call.
rdar://problem/22667622
Differential Revision: http://reviews.llvm.org/D12923
llvm-svn: 252368
Summary:
In general GetTempDir follows the same logic as the replaced code: checks env variables TMP, TEMP, USERPROFILE in order. However, it also perform other checks like making separators native (\), making the path absolute, etc.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 252366
We used to try to constant-fold them to i32 immediates.
Given that fast-isel doesn't otherwise support vNi1, when selecting
the result users, we'd fallback to SDAG anyway.
However, if the users were in another block, we'd insert broken
cross-class copies (GPR32 to FPR64).
Give up, let SDAG agree with itself on a vNi1 legalization strategy.
llvm-svn: 252364
When matching non-LSB-extracting truncating broadcasts, we now insert
the necessary SRL. If the scalar resulted from a load, the SRL will be
folded into it, creating a narrower, offset, load.
However, i16 loads aren't Desirable, so we get i16->i32 zextloads.
We already catch i16 aextloads; catch these as well.
llvm-svn: 252363
Now that we recognize this, we can support it instead of bailing out.
That is, we can fold:
(v8i16 (shufflevector
(v8i16 (bitcast (v4i32 (build_vector X, Y, ...)))),
<1,1,...,1>))
into:
(v8i16 (vbroadcast (i16 (trunc (srl Y, 16)))))
llvm-svn: 252362
We used to incorrectly assume that the offset we're extracting from
was a multiple of the element size. So, we'd fold:
(v8i16 (shufflevector
(v8i16 (bitcast (v4i32 (build_vector X, Y, ...)))),
<1,1,...,1>))
into:
(v8i16 (vbroadcast (i16 (trunc Y))))
whereas we should have extracted the higher bits from X.
Instead, bail out if the assumption doesn't hold.
llvm-svn: 252361
Summary:
Pass the VOPProfile object all the through to *_m multiclasses. This will
allow us to do more simplifications in the future.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13437
llvm-svn: 252339
The SLPVectorizer had a very crude way of trying to benefit
from associativity: it tried to optimize for splat/broadcast
or in order to have the same operator on the same side.
This is benefitial to the cost model and allows more vectorization
to occur.
This patch improve the logic and make the detection optimal (locally,
we don't look at the full tree but only at the immediate children).
Should fix https://llvm.org/bugs/show_bug.cgi?id=25247
Reviewers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D13996
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 252337
All 3 operands of FMA3 instructions are commutable now.
Patch by Slava Klochkov
Reviewers: Quentin Colombet(qcolombet), Ahmed Bougacha(ab).
Differential Revision: http://reviews.llvm.org/D13269
llvm-svn: 252335
Modelling of the expression stack is evolving. This patch takes another
step by making pushes explicit.
Differential Revision: http://reviews.llvm.org/D14338
llvm-svn: 252334
Summary:
This change makes the `isImpliedCondition` interface similar to the rest
of the functions in ValueTracking (in that it takes a DataLayout,
AssumptionCache etc.). This is an NFC, intended to make a later diff
less noisy.
Depends on D14369
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14391
llvm-svn: 252333
Summary:
Currently `isImpliedCondition` will optimize "I +_nuw C < L ==> I < L"
only if C is positive. This is an unnecessary restriction -- the
implication holds even if `C` is negative.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14369
llvm-svn: 252332
Summary:
This change adds a framework for adding more smarts to
`isImpliedCondition` around inequalities. Informally,
`isImpliedCondition` will now try to prove "A < B ==> C < D" by proving
"C <= A && B <= D", since then it follows "C <= A < B <= D".
While this change is in principle NFC, I could not think of a way to not
handle cases like "i +_nsw 1 < L ==> i < L +_nsw 1" (that ValueTracking
did not handle before) while keeping the change understandable. I've
added tests for these cases.
Reviewers: reames, majnemer, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14368
llvm-svn: 252331
Mark kernels that use certain features that require user
SGPRs to support with kernel attributes. We need to know
before instruction selection begins because it impacts
the kernel calling convention lowering.
For now this only detects the workitem intrinsics.
llvm-svn: 252323
For some reason VS_32 ends up factoring into the pressure heuristics
even though we should never see a virtual register with this class.
When SGPRs are reserved for register spilling, this for some reason
triggers reg-crit scheduling.
Setting isAllocatable = 0 may help with this since that seems to remove
it from the default implementation's generated table.
llvm-svn: 252321
Summary:
This reverts commit r251965.
Restore "Move metadata linking after lazy global materialization/linking."
This restores commit r251926, with fixes for the LTO bootstrapping bot
failure.
The bot failure was caused by references from debug metadata to
otherwise unreferenced globals. Previously, this caused the lazy linking
to link in their defs, which is unnecessary. With this patch, because
lazy linking is complete when we encounter the metadata reference, the
materializer created a declaration. For definitions such as aliases and
comdats, it is illegal to have a declaration. Furthermore, metadata
linking should not change code generation. Therefore, when linking of
global value bodies is complete, the materializer will simply return
nullptr as the new reference for the linked metadata.
This change required fixing a different test to ensure there was a
real reference to a linkonce global that was only being reference from
metadata.
Note that the new changes to the only-needed-named-metadata.ll test
illustrate an issue with llvm-link -only-needed handling of comdat
groups, whereby it may result in an incomplete comdat group. I note this
in the test comments, but the issue is orthogonal to this patch (it can
be reproduced without any metadata at head).
Reviewers: dexonsmith, rafael, tra
Subscribers: tobiasvk, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D14447
llvm-svn: 252320
Summary:
In this implementation, LiveIntervalAnalysis invents a few register
masks on basic block boundaries that preserve no registers. The nice
thing about this is that it prevents the prologue inserter from thinking
it needs to spill all XMM CSRs, because it doesn't see any explicit
physreg defs in the MI.
Reviewers: MatzeB, qcolombet, JosephTremoulet, majnemer
Subscribers: MatzeB, llvm-commits
Differential Revision: http://reviews.llvm.org/D14407
llvm-svn: 252318
The benefit from converting narrow loads into a wider load (r251438) could be
micro-architecturally dependent, as it assumes that a single load with two bitfield
extracts is cheaper than two narrow loads. Currently, this conversion is
enabled only in cortex-a57 on which performance benefits were verified.
llvm-svn: 252316
We now create the .eh_frame section early, just like every other special
section.
This means that the special flags are visible in code that explicitly
asks for ".eh_frame".
llvm-svn: 252313
Summary:
The bug was that the sldi instructions have immediate widths dependant on
their element size. So sldi.d has a 1-bit immediate and sldi.b has a 4-bit
immediate. All of these were using 4-bit immediates previously.
Reviewers: vkalintiris
Subscribers: llvm-commits, atanasyan, dsanders
Differential Revision: http://reviews.llvm.org/D14018
llvm-svn: 252297
Summary:
The bug was that the MIPS32R6/MIPS64R6/microMIPS32R6 versions of LSA and DLSA
(unlike the MSA version) failed to account for the off-by-one encoding of the
immediate. The range is actually 1..4 rather than 0..3.
Reviewers: vkalintiris
Subscribers: atanasyan, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14015
llvm-svn: 252295
Summary:
Without these patterns we would generate a complete LL/SC sequence.
This would be problematic for memory regions marked as WRITE-only or
READ-only, as the instructions LL/SC would read/write to the protected
memory regions correspondingly.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14397
llvm-svn: 252293
This attribute allows the compiler to assume that the function never recurses into itself, either directly or indirectly (transitively). This can be used among other things to demote global variables to locals.
llvm-svn: 252282
This adds the EH_RESTORE x86 pseudo instr, which is responsible for
restoring the stack pointers: EBP and ESP, and ESI if stack realignment
is involved. We only need this on 32-bit x86, because on x64 the runtime
restores CSRs for us.
Previously we had to keep the CATCHRET instruction around during SEH so
that we could convince X86FrameLowering to restore our frame pointers.
Now we can split these instructions earlier.
This was confusing, because we had a return instruction which wasn't
really a return and was ultimately going to be removed by
X86FrameLowering. This change also simplifies X86FrameLowering, which
really shouldn't be building new MBBs.
No observable functional change currently, but with the new register
mask stuff in D14407, CATCHRET will become a register allocator barrier,
and our existing tests rely on us having reasonable register allocation
around SEH.
llvm-svn: 252266
Windows EH funclets need to always return to a single parent funclet. However, it is possible for earlier optimizations to combine funclets (probably based on one funclet having an unreachable terminator) in such a way that this condition is violated.
These changes add code to the WinEHPrepare pass to detect situations where a funclet has multiple parents and clone such funclets, fixing up the unwind and catch return edges so that each copy of the funclet returns to the correct parent funclet.
Differential Revision: http://reviews.llvm.org/D13274?id=39098
llvm-svn: 252249
The bug: I missed adding break statements in the switch / case.
Original commit message:
[SCEV] Teach SCEV some axioms about non-wrapping arithmetic
Summary:
- A s< (A + C)<nsw> if C > 0
- A s<= (A + C)<nsw> if C >= 0
- (A + C)<nsw> s< A if C < 0
- (A + C)<nsw> s<= A if C <= 0
Right now `C` needs to be a constant, but we can later generalize it to
be a non-constant if needed.
Reviewers: atrick, hfinkel, reames, nlewycky
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13686
llvm-svn: 252236
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
inalloca variables were not treated as static allocas, therefore didn't
participate in regular stack instrumentation. We don't want them to
participate in dynamic alloca instrumentation as well.
llvm-svn: 252213
We already had a test for this for 32-bit SEH catchpads, but those don't
actually create funclets. We had a bug that only appeared in funclet
prologues, where we would establish EBP and ESI as our FP and BP, and
then downstream prologue code would overwrite them.
While I was at it, I fixed Win64+funclets+stackrealign. This issue
doesn't come up as often there due to the ABI requring 16 byte stack
alignment, but now we can rest easy that AVX and WinEH will work well
together =P.
llvm-svn: 252210
Mangling type information into MachineInstr opcode names was a temporary
measure, and it's starting to get hairy. At the same time, the MC instruction
printer wants to use AsmString strings for printing. This patch takes the
first step, starting the process of adding AsmStrings for instructions.
llvm-svn: 252203
Also, remove an enum hack where enum values were used as indexes into an array.
We may want to make this a real class to allow pattern-based queries/customization (D13417).
llvm-svn: 252196
The needed lld matching changes to be submitted immediately next,
but this revision will cause lld failures with this alone which is expected.
This removes the eating of the error in Archive::Child::getSize() when the characters
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
These changes will require corresponding changes to the lld project. That will be
committed immediately after this change. But this revision will cause lld failures
with this alone which is expected.
llvm-svn: 252192
Summary:
This review is related to another review request http://reviews.llvm.org/D11268, does the same and merely fixes a couple of issues with it.
D11268 is quite old and has merge conflicts against the current trunk.
This request
- rebases D11268 onto the new trunk;
- resolves the merge conflicts;
- fixes the prologue_end tests, which do not pass due to the subprogram definitions not marked as distinct.
Reviewers: echristo, rengolin, kubabrecka
Subscribers: aemerson, rengolin, jyknight, dsanders, llvm-commits, asl
Differential Revision: http://reviews.llvm.org/D14338
llvm-svn: 252177
This fixes the issue of wrong CFA calculation in the following case:
0x08048400 <+0>: push %ebx
0x08048401 <+1>: sub $0x8,%esp
0x08048404 <+4>: **call 0x8048409 <test+9>**
0x08048409 <+9>: **pop %eax**
0x0804840a <+10>: add $0x1bf7,%eax
0x08048410 <+16>: mov %eax,%ebx
0x08048412 <+18>: call 0x80483f0 <bar>
0x08048417 <+23>: add $0x8,%esp
0x0804841a <+26>: pop %ebx
0x0804841b <+27>: ret
The highlighted instructions are a product of movpc instruction. The call
instruction changes the stack pointer, and pop instruction restores its
value. However, the rule for computing CFA is not updated and is wrong on
the pop instruction. So, e.g. backtrace in gdb does not work when on the pop
instruction. This adds cfi instructions for both call and pop instructions.
cfi_adjust_cfa_offset** instruction is used with the appropriate offset for
setting the rules to calculate CFA correctly.
Patch by Violeta Vukobrat.
Differential Revision: http://reviews.llvm.org/D14021
llvm-svn: 252176
We can conservatively know that CMOV's known bits are the intersection of known bits for each of its operands. This helps PerformCMOVToBFICombine find more opportunities.
I tried hard to create a testcase for this and failed - we have to sufficiently confuse DAG.computeKnownBits which can see through all the cheap tricks I tried to narrow my larger testcase down :(
This code is actually exercised in CodeGen/ARM/bfi.ll, there's just no functional difference because DAG.computeKnownBits gets the right answer in that case.
llvm-svn: 252168
We were correctly skipping dbginfo intrinsics and terminators, but the initial bailout wasn't, causing it to bail out on almost any block.
llvm-svn: 252152
Summary:
GetUnderlyingObjects() can return "null" among its list of objects,
we don't want to deduce that two pointers can point to the same
memory in this case, so filter it out.
Reviewers: anemet
Subscribers: dexonsmith, llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 252149
Summary:
Remove the loop over the uses of the CallSite in ArgumentUsesTracker.
Since we have the `Use *` for actual argument operand, we can just use
pointer subtraction.
The time complexity remains the same though (except for a vararg
argument) -- `std::advance` is O(UseIndex) for the ArgumentList
iterator.
The real motivation is to make a later change adding support for operand
bundles simpler.
Reviewers: reames, chandlerc, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14363
llvm-svn: 252141
The operand layout is slightly different for the atomic
opcodes from the usual MUBUF loads and stores.
This should only fix it on SI/CI. VI is still broken
because it still emits the addr64 replacement.
llvm-svn: 252140
Summary:
The CLR's personality routine passes the pointer to the establisher frame
in RCX, not RDX.
Reviewers: pgavlin, majnemer, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14343
llvm-svn: 252135
Summary:
llvm-symbolizer understands both PDBs and DWARF, so it is more likely to
succeed at symbolization. If llvm-symbolizer is unavailable, we will
fall back to dbghelp. This also makes our crash traces more similar
between Windows and Linux.
Reviewers: Bigcheese, zturner, chapuni
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12884
llvm-svn: 252118
With this change, instrumentation code and reader/write
code related to profile data structs are kept strictly
in-sync. THis will be extended to cfe and compile-rt
references as well.
Differential Revision: http://reviews.llvm.org/D13843
llvm-svn: 252113
Summary:
Earlier CaptureTracking would assume all "interesting" operands to a
call or invoke were its arguments. With operand bundles this is no
longer true.
Note: an earlier change got `doesNotCapture` working correctly with
operand bundles.
This change uses DSE to test the changes to CaptureTracking. DSE is a
vehicle for testing only, and is not directly involved in this change.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14306
llvm-svn: 252095
The generic infrastructure already did a lot of work to decide if the
fixup value is know or not. It doesn't make sense to reimplement a very
basic case: same fragment.
llvm-svn: 252090
Win64 has some strict requirements for the epilogue. As a result, we disable
shrink-wrapping for Win64 unless the block that gets the epilogue is already an
exit block.
Fixes PR24193.
llvm-svn: 252088
Splits PrintLoopPass into a new-style pass and a PrintLoopPassWrapper,
much like we already do for PrintFunctionPass and PrintModulePass.
llvm-svn: 252085
This is part-1 of the patch that replaces all edge weights in MBB by
probabilities, which only adds new interfaces. No functional changes.
Differential revision: http://reviews.llvm.org/D13908
llvm-svn: 252083
Summary:
Data operands of a call or invoke consist of the call arguments, and
the bundle operands associated with the `call` (or `invoke`)
instruction. The motivation for this change is that we'd like to be
able to query "argument attributes" like `readonly` and `nocapture`
for bundle operands naturally.
This change also provides a conservative "implementation" for these
attributes for any bundle operand, and an extension point for future
work.
Reviewers: chandlerc, majnemer, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14305
llvm-svn: 252077
This patch improves the memory folding of the inserted float element for the (V)INSERTPS instruction.
The existing implementation occurs in the DAGCombiner and relies on the narrowing of a whole vector load into a scalar load (and then converted into a vector) to (hopefully) allow folding to occur later on. Not only has this proven problematic for debug builds, it also prevents other memory folds (notably stack reloads) from happening.
This patch removes the old implementation and moves the folding code to the X86 foldMemoryOperand handler. A new private 'special case' function - foldMemoryOperandCustom - has been added to deal with memory folding of instructions that can't just use the lookup tables - (V)INSERTPS is the first of several that could be done.
It also tweaks the memory operand folding code with an additional pointer offset that allows existing memory addresses to be modified, in this case to convert the vector address to the explicit address of the scalar element that will be inserted.
Unlike the previous implementation we now set the insertion source index to zero, although this is ignored for the (V)INSERTPSrm version, anything that relied on shuffle decodes (such as unfolding of insertps loads) was incorrectly calculating the source address - I've added a test for this at insertps-unfold-load-bug.ll
Differential Revision: http://reviews.llvm.org/D13988
llvm-svn: 252074
Summary:
This is intended to make a later change simpler.
Note: adding this bounds checking required fixing `X86FastISel`. As
far I can tell I've preserved original behavior but a careful review
will be appreciated.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14304
llvm-svn: 252073
Patch by Slava Klochkov
The key difference between FMA* and FMA*_Int opcodes is that FMA*_Int opcodes are handled more conservatively. It is illegal to commute the 1st operand of FMA*_Int instructions as the upper bits of scalar FMA intrinsic result must be taken from the 1st operand, but such commute transformation would change those upper bits and invalidate the intrinsic's result.
Reviewers: Quentin Colombet, Elena Demikhovsky
Differential Revision: http://reviews.llvm.org/D13710
llvm-svn: 252060
If we have a CMOV, OR and AND combination such as:
if (x & CN)
y |= CM;
And:
* CN is a single bit;
* All bits covered by CM are known zero in y;
Then we can convert this to a sequence of BFI instructions. This will always be a win if CM is a single bit, will always be no worse than the TST & OR sequence if CM is two bits, and for thumb will be no worse if CM is three bits (due to the extra IT instruction).
llvm-svn: 252057
When converting an alias to a non-alias when the aliasee is not
imported, ensure that the linkage type is set to external so that it is
a valid linkage type. Added a test case that exposed this issue.
llvm-svn: 252054
We can often end up with conditional stores that cannot be speculated. They can come from fairly simple, idiomatic code:
if (c & flag1)
*a = x;
if (c & flag2)
*a = y;
...
There is no dominating or post-dominating store to a, so it is not legal to move the store unconditionally to the end of the sequence and cache the intermediate result in a register, as we would like to.
It is, however, legal to merge the stores together and do the store once:
tmp = undef;
if (c & flag1)
tmp = x;
if (c & flag2)
tmp = y;
if (c & flag1 || c & flag2)
*a = tmp;
The real power in this optimization is that it allows arbitrary length ladders such as these to be completely and trivially if-converted. The typical code I'd expect this to trigger on often uses binary-AND with constants as the condition (as in the above example), which means the ending condition can simply be truncated into a single binary-AND too: 'if (c & (flag1|flag2))'. As in the general case there are bitwise operators here, the ladder can often be optimized further too.
This optimization involves potentially increasing register pressure. Even in the simplest case, the lifetime of the first predicate is extended. This can be elided in some cases such as using binary-AND on constants, but not in the general case. Threading 'tmp' through all branches can also increase register pressure.
The optimization as in this patch is enabled by default but kept in a very conservative mode. It will only optimize if it thinks the resultant code should be if-convertable, and additionally if it can thread 'tmp' through at least one existing PHI, so it will only ever in the worst case create one more PHI and extend the lifetime of a predicate.
This doesn't trigger much in LNT, unfortunately, but it does trigger in a big way in a third party test suite.
llvm-svn: 252051
The x86 "sitofp i64 to double" dag combine, in 32-bit mode, lowers sitofp
directly to X86ISD::FILD (or FILD_FLAG). This should not be done in soft-float mode.
llvm-svn: 252042
In my previous change to CVP (251606), I made CVP much more aggressive about trying to constant fold comparisons. This patch is a reversal in direction. Rather than being agressive about every compare, we restore the non-block local restriction for most, and then try hard for compares feeding returns.
The motivation for this is two fold:
* The more I thought about it, the less comfortable I got with the possible compile time impact of the other approach. There have been no reported issues, but after talking to a couple of folks, I've come to the conclusion the time probably isn't justified.
* It turns out we need to know the context to leverage the full power of LVI. In particular, asking about something at the end of it's block (the use of a compare in a return) will frequently get more precise results than something in the middle of a block. This is an implementation detail, but it's also hard to get around since mid-block queries have to reason about possible throwing instructions and don't get to use most of LVI's block focused infrastructure. This will become particular important when combined with http://reviews.llvm.org/D14263.
Differential Revision: http://reviews.llvm.org/D14271
llvm-svn: 252032
There is no point in having invoke safepoints handled differently than the
call safepoints. All relevant decisions could be made by looking at whether
or not gc.result and gc.relocate lay in a same basic block. This change will
allow to lower call safepoints with relocates and results in a different
basic blocks. See test case for example.
Differential Revision: http://reviews.llvm.org/D14158
llvm-svn: 252028
Summary:
The goal of this pass is to perform store-to-load forwarding across the
backedge of a loop. E.g.:
for (i)
A[i + 1] = A[i] + B[i]
=>
T = A[0]
for (i)
T = T + B[i]
A[i + 1] = T
The pass relies on loop dependence analysis via LoopAccessAnalisys to
find opportunities of loop-carried dependences with a distance of one
between a store and a load. Since it's using LoopAccessAnalysis, it was
easy to also add support for versioning away may-aliasing intervening
stores that would otherwise prevent this transformation.
This optimization is also performed by Load-PRE in GVN without the
option of multi-versioning. As was discussed with Daniel Berlin in
http://reviews.llvm.org/D9548, this is inferior to a more loop-aware
solution applied here. Hopefully, we will be able to remove some
complexity from GVN/MemorySSA as a consequence.
In the long run, we may want to extend this pass (or create a new one if
there is little overlap) to also eliminate loop-indepedent redundant
loads and store that *require* versioning due to may-aliasing
intervening stores/loads. I have some motivating cases for store
elimination. My plan right now is to wait for MemorySSA to come online
first rather than using memdep for this.
The main motiviation for this pass is the 456.hmmer loop in SPECint2006
where after distributing the original loop and vectorizing the top part,
we are left with the critical path exposed in the bottom loop. Being
able to promote the memory dependence into a register depedence (even
though the HW does perform store-to-load fowarding as well) results in a
major gain (~20%). This gain also transfers over to x86: it's
around 8-10%.
Right now the pass is off by default and can be enabled
with -enable-loop-load-elim. On the LNT testsuite, there are two
performance changes (negative number -> improvement):
1. -28% in Polybench/linear-algebra/solvers/dynprog: the length of the
critical paths is reduced
2. +2% in Polybench/stencils/adi: Unfortunately, I couldn't reproduce this
outside of LNT
The pass is scheduled after the loop vectorizer (which is after loop
distribution). The rational is to try to reuse LAA state, rather than
recomputing it. The order between LV and LLE is not critical because
normally LV does not touch scalar st->ld forwarding cases where
vectorizing would inhibit the CPU's st->ld forwarding to kick in.
LoopLoadElimination requires LAA to provide the full set of dependences
(including forward dependences). LAA is known to omit loop-independent
dependences in certain situations. The big comment before
removeDependencesFromMultipleStores explains why this should not occur
for the cases that we're interested in.
Reviewers: dberlin, hfinkel
Subscribers: junbuml, dberlin, mssimpso, rengolin, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13259
llvm-svn: 252017
Summary: Will be used by the LoopLoadElimination pass.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13258
llvm-svn: 252016
A profile of an LTO link of Chrome revealed that we were spending some
~30-50% of execution time in the function Constant::getRelocationInfo(),
which is called from TargetLoweringObjectFile::getKindForGlobal() and in turn
from TargetMachine::getNameWithPrefix().
It turns out that we only need the result of getKindForGlobal() when
targeting Mach-O, so this change moves the relevant part of the logic to
TargetLoweringObjectFileMachO.
NFCI.
Differential Revision: http://reviews.llvm.org/D14168
llvm-svn: 252014
The printed name and the parsed assembler names weren't the same.
I'm not sure which name SC prints these as, but I think it's this one.
llvm-svn: 252010
If the requested SGPR was not actually aligned, it was
accepted and rounded down instead of rejected.
Also fix an assert if the range is an invalid size.
llvm-svn: 252009
Summary:
Add support for wasm's select operator, and lower LLVM's select DAG node
to it.
Reviewers: sunfish
Subscribers: dschuff, llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D14295
llvm-svn: 252002
Introduce DIPrinter which takes care of rendering DILineInfo and
friends. This allows LLVMSymbolizer class to return a structured data
instead of plain std::strings.
llvm-svn: 251989
Summary:
We now collect all types of dependences including lexically forward
deps not just "interesting" ones.
Reviewers: hfinkel
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13256
llvm-svn: 251985
Make printDILineInfo and friends responsible for just rendering the
contents of the structures, demangling should actually be performed
earlier, when we have the information about the originating
SymbolizableModule at hand.
llvm-svn: 251981
XOP has the VPCMOV instruction that performs the common vector bit select operation OR( AND( SRC1, SRC3 ), AND( SRC2, ~SRC3 ) )
This patch adds tablegen pattern matching for this instruction.
Differential Revision: http://reviews.llvm.org/D8841
llvm-svn: 251975
Summary:
When the dependence distance in zero then we have a loop-independent
dependence from the earlier to the later access.
No current client of LAA uses forward dependences so other than
potentially hitting the MaxDependences threshold earlier, this change
shouldn't affect anything right now.
This and the previous patch were tested together for compile-time
regression. None found in LNT/SPEC.
Reviewers: hfinkel
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13255
llvm-svn: 251973
Summary:
Before this change, we didn't use to collect forward dependences since
none of the current clients (LV, LDist) required them.
The motivation to also collect forward dependences is a new pass
LoopLoadElimination (LLE) which discovers store-to-load forwarding
opportunities across the loop's backedge. The pass uses both lexically
forward or backward loop-carried dependences to detect these
opportunities.
The new pass also analyzes loop-independent (forward) dependences since
they can conflict with the loop-carried dependences in terms of how the
data flows through memory.
The newly added test only covers loop-carried forward dependences
because loop-independent ones are currently categorized as NoDep. The
next patch will fix this.
The two patches were tested together for compile-time regression. None
found in LNT/SPEC.
Note that with this change LAA provides all dependences rather than just
"interesting" ones. A subsequent NFC patch will remove the now trivial
isInterestingDependence and rename the APIs.
Reviewers: hfinkel
Subscribers: jmolloy, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13254
llvm-svn: 251972
This reverts commit r251926. I believe this is causing an LTO
bootstrapping bot failure
(http://lab.llvm.org:8080/green/job/llvm-stage2-cmake-RgLTO_build/3669/).
Haven't been able to repro it yet, but after looking at the metadata I
am pretty sure I know what is going on.
llvm-svn: 251965
Summary:
Since now Scalar Evolution can create non-add rec expressions for PHI
nodes, it can also create SCEVConstant expressions. This will confuse
replaceCongruentPHIs, which previously relied on the fact that SCEV
could not produce constants in this case.
We will now replace the node with a constant in these cases - or avoid
processing the Phi in case of a type mismatch.
Reviewers: sanjoy
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D14230
llvm-svn: 251938
Bypassing LLVM for this has a number of benefits:
1) Laziness support becomes asm-syntax agnostic (previously lazy jitting didn't
work on Windows as the resolver block was in Darwin asm).
2) For cross-process JITs, it allows resolver blocks and trampolines to be
emitted directly in the target process, reducing cross process traffic.
3) It should be marginally faster.
llvm-svn: 251933
Summary:
Currently, named metadata is linked before the LazilyLinkGlobalValues
list is walked and materialized/linked. As a result, references
from DISubprogram and DIGlobalVariable metadata to yet unmaterialized
functions and variables cause them to be added to the lazy linking
list and their definitions are materialized and linked.
This makes the llvm-link -only-needed option not have the intended
effect when debug information is present, as the otherwise unneeded
functions/variables are still linked in.
Additionally, for ThinLTO I have implemented a mechanism to only link
in debug metadata needed by imported functions. Moving named metadata
linking after lazy GV linking will facilitate applying this mechanism
to the LTO and "llvm-link -only-needed" cases as well.
Reviewers: dexonsmith, tra, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14195
llvm-svn: 251926
No test, since it would depend on what the compiler can optimize/reuse.
My next commit made this bug visible on Linux Release compiles with some
versions of gcc.
llvm-svn: 251909
When push instructions are being used to pass function arguments on
the stack, and either EH or debugging are enabled, we need to generate
.cfi_adjust_cfa_offset directives appropriately. For (synch) EH, it is
enough for the CFA offset to be correct at every call site, while
for debugging we want to be correct after every push.
Darwin does not support this well, so don't use pushes whenever it
would be required.
Differential Revision: http://reviews.llvm.org/D13767
llvm-svn: 251904
Commit 251839 triggers miscompiles on some bots:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-fast/builds/13723
(The commit is listed in 13722, but due to an existing failure introduced in
13721 and reverted in 13723 the failure is only visible in 13723)
To verify r251839 is indeed the only change that triggered the buildbot failures
and to ensure the buildbots remain green while investigating I temporarily
revert this commit. At the current state it is unclear if this commit introduced
some miscompile or if it only exposed code to Polly that is subsequently
miscompiled by Polly.
llvm-svn: 251901
ScheduleDAGInstrs doesn't behave differently before or after register
allocation. It was only used in a method of MachineSchedulerBase which
behaved differently in MachineScheduler/PostMachineScheduler. Change
this to let MachineScheduler/PostMachineScheduler just pass in a
parameter to that function.
The order of the LiveIntervals* and bool RemoveKillFlags paramters have
been switched to make out-of-tree code fail instead of unintentionally
passing a value intended for the IsPostRA flag to the (previously
following and default initialized) RemoveKillFlags.
Differential Revision: http://reviews.llvm.org/D14245
llvm-svn: 251883
This was causing a variety of test failures when v2i64
is added as a legal type.
SIFixSGPRCopies should correctly handle the case of vector inputs
to a scalar reg_sequence, so this isn't necessary anymore. This
was hiding some deficiencies in how reg_sequence is handled later,
but this shouldn't be a problem anymore since the register class
copy of a reg_sequence is now done before the reg_sequence.
llvm-svn: 251860
I've found myself pointlessly debugging problems from running
graphics tests with an HSA triple a few times, so stop this from
happening again.
llvm-svn: 251858
This is a redo of r251849 except the tests have been split into arch-specific folders
to hopefully make the bots happy.
This is a follow-up from the discussion in D12965. The block-at-a-time limitation of
SelectionDAG also came up in D13297.
Without the InstCombine change from D12965, I don't expect this patch to make any
difference in the real world because InstCombine does not shrink cases like this in
visitSwitchInst(). But we need to have this CGP safety harness in place before
proceeding with any shrinkage in D12965, so we won't generate extra extends for compares.
I've opted for IR regression tests in the patch because that seems like a clearer way to
test the transform, but PowerPC CodeGen for an i16 widening test is shown below. x86
will need more work to solve: https://llvm.org/bugs/show_bug.cgi?id=22473
Before:
BB#0:
mr 4, 3
extsh. 3, 4
ble 0, .LBB0_5
BB#1:
cmpwi 3, 99
bgt 0, .LBB0_9
BB#2:
rlwinm 4, 4, 0, 16, 31 <--- 32-bit mask/extend
li 3, 0
cmplwi 4, 1
beqlr 0
BB#3:
cmplwi 4, 10
bne 0, .LBB0_12
BB#4:
li 3, 1
blr
.LBB0_5:
rlwinm 3, 4, 0, 16, 31 <--- 32-bit mask/extend
cmplwi 3, 65436
beq 0, .LBB0_13
BB#6:
cmplwi 3, 65526
beq 0, .LBB0_15
BB#7:
cmplwi 3, 65535
bne 0, .LBB0_12
BB#8:
li 3, 4
blr
.LBB0_9:
rlwinm 3, 4, 0, 16, 31 <--- 32-bit mask/extend
cmplwi 3, 100
beq 0, .LBB0_14
...
After:
BB#0:
rlwinm 4, 3, 0, 16, 31 <--- mask/extend to 32-bit and then use that for comparisons
cmpwi 4, 999
ble 0, .LBB0_5
BB#1:
lis 3, 0
ori 3, 3, 65525
cmpw 4, 3
bgt 0, .LBB0_9
BB#2:
cmplwi 4, 1000
beq 0, .LBB0_14
BB#3:
cmplwi 4, 65436
bne 0, .LBB0_13
BB#4:
li 3, 6
blr
.LBB0_5:
li 3, 0
cmplwi 4, 1
beqlr 0
BB#6:
cmplwi 4, 10
beq 0, .LBB0_12
BB#7:
cmplwi 4, 100
bne 0, .LBB0_13
BB#8:
li 3, 2
blr
.LBB0_9:
cmplwi 4, 65526
beq 0, .LBB0_15
BB#10:
cmplwi 4, 65535
bne 0, .LBB0_13
...
Differential Revision: http://reviews.llvm.org/D13532
llvm-svn: 251857
To be able to maximize the bandwidth during vectorization, this patch provides a new flag vectorizer-maximize-bandwidth. When it is turned on, the vectorizer will determine the vectorization factor (VF) using the smallest instead of widest type in the loop. To avoid increasing register pressure too much, estimates of the register usage for different VFs are calculated so that we only choose a VF when its register usage doesn't exceed the number of available registers.
This is the second attempt to submit this patch. The first attempt got a test failure on ARM. This patch is updated to try to fix the failure (more specifically, by handling the case when VF=1).
Differential revision: http://reviews.llvm.org/D8943
llvm-svn: 251850
This is a follow-up from the discussion in D12965. The block-at-a-time limitation of
SelectionDAG also came up in D13297.
Without the InstCombine change from D12965, I don't expect this patch to make any
difference in the real world because InstCombine does not shrink cases like this in
visitSwitchInst(). But we need to have this CGP safety harness in place before
proceeding with any shrinkage in D12965, so we won't generate extra extends for compares.
I've opted for IR regression tests in the patch because that seems like a clearer way to
test the transform, but PowerPC CodeGen for an i16 widening test is shown below. x86
will need more work to solve: https://llvm.org/bugs/show_bug.cgi?id=22473
Before:
BB#0:
mr 4, 3
extsh. 3, 4
ble 0, .LBB0_5
BB#1:
cmpwi 3, 99
bgt 0, .LBB0_9
BB#2:
rlwinm 4, 4, 0, 16, 31 <--- 32-bit mask/extend
li 3, 0
cmplwi 4, 1
beqlr 0
BB#3:
cmplwi 4, 10
bne 0, .LBB0_12
BB#4:
li 3, 1
blr
.LBB0_5:
rlwinm 3, 4, 0, 16, 31 <--- 32-bit mask/extend
cmplwi 3, 65436
beq 0, .LBB0_13
BB#6:
cmplwi 3, 65526
beq 0, .LBB0_15
BB#7:
cmplwi 3, 65535
bne 0, .LBB0_12
BB#8:
li 3, 4
blr
.LBB0_9:
rlwinm 3, 4, 0, 16, 31 <--- 32-bit mask/extend
cmplwi 3, 100
beq 0, .LBB0_14
...
After:
BB#0:
rlwinm 4, 3, 0, 16, 31 <--- mask/extend to 32-bit and then use that for comparisons
cmpwi 4, 999
ble 0, .LBB0_5
BB#1:
lis 3, 0
ori 3, 3, 65525
cmpw 4, 3
bgt 0, .LBB0_9
BB#2:
cmplwi 4, 1000
beq 0, .LBB0_14
BB#3:
cmplwi 4, 65436
bne 0, .LBB0_13
BB#4:
li 3, 6
blr
.LBB0_5:
li 3, 0
cmplwi 4, 1
beqlr 0
BB#6:
cmplwi 4, 10
beq 0, .LBB0_12
BB#7:
cmplwi 4, 100
bne 0, .LBB0_13
BB#8:
li 3, 2
blr
.LBB0_9:
cmplwi 4, 65526
beq 0, .LBB0_15
BB#10:
cmplwi 4, 65535
bne 0, .LBB0_13
...
Differential Revision: http://reviews.llvm.org/D13532
llvm-svn: 251849
This reverts commit r251837, due to a number of bot failures of the form:
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to
'llvm::object::FunctionIndexObjectFile::create(llvm::MemoryBufferRef,
llvm::LLVMContext&, llvm::Module const*, bool)'
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to 'llvm::object::FunctionIndexObjectFile::takeIndex()'
I'm not sure why these are happening - I added Object to the requred
libraries in tools/llvm-link/LLVMBuild.txt and the LLVM_LINK_COMPONENTS
in tools/llvm-link/CMakeLists.txt. Confirmed for my build that these
symbols come out of libLLVMObject.a. What am I missing?
llvm-svn: 251841
Summary:
This patch adds support to check if a loop has loop invariant conditions which lead to loop exits. If so, we know that if the exit path is taken, it is at the first loop iteration. If there is an induction variable used in that exit path whose value has not been updated, it will keep its initial value passing from loop preheader. We can therefore rewrite the exit value with
its initial value. This will help remove phis created by LCSSA and enable other optimizations like loop unswitch.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13974
llvm-svn: 251839
Summary:
Support for necessary linkage changes and symbol renaming during
ThinLTO function importing.
Also includes llvm-link support for manually importing functions
and associated llvm-link based tests.
Note that this does not include support for intelligently importing
metadata, which is currently imported duplicate times. That support will
be in the follow-on patch, and currently is ignored by the tests.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: tobiasvk, tejohnson, llvm-commits
Differential Revision: http://reviews.llvm.org/D13515
llvm-svn: 251837
In the current BB placement algorithm, a loop chain always contains all loop blocks. This has a drawback that cold blocks in the loop may be inserted on a hot function path, hence increasing branch cost and also reducing icache locality.
Consider a simple example shown below:
A
|
B⇆C
|
D
When B->C is quite cold, the best BB-layout should be A,B,D,C. But the current implementation produces A,C,B,D.
This patch filters those cold blocks off from the loop chain by comparing the ratio:
LoopBBFreq / LoopFreq
to 20%: if it is less than 20%, we don't include this BB to the loop chain. Here LoopFreq is the frequency of the loop when we reduce the loop into a single node. In general we have more cold blocks when the loop has few iterations. And vice versa.
Differential revision: http://reviews.llvm.org/D11662
llvm-svn: 251833
1) PR25154. This is basically a repeat of PR18102, which was fixed in
r200201, and broken again by r234430. The latter changed which of the
store nodes was merged into from the first to the last. Thus, we now
also need to prefer merging a later store at a given address into the
target node, instead of an earlier one.
2) While investigating that, I also realized I'd introduced a bug in
r236850. There, I removed a check for alignment -- not realizing that
nothing except the alignment check was ensuring that none of the stores
were overlapping! This is a really bogus way to ensure there's no
aliased stores.
A better solution to both of these issues is likely to always use the
code added in the 'if (UseAA)' branches which rearrange the chain based
on a more principled analysis. I'll look into whether that can be used
always, but in the interest of getting things back to working, I think a
minimal change makes sense.
llvm-svn: 251816
Summary:
SCEV Predicates represent conditions that typically cannot be derived from
static analysis, but can be used to reduce SCEV expressions to forms which are
usable for different optimizers.
ScalarEvolution now has the rewriteUsingPredicate method which can simplify a
SCEV expression using a SCEVPredicateSet. The normal workflow of a pass using
SCEVPredicates would be to hold a SCEVPredicateSet and every time assumptions
need to be made a new SCEV Predicate would be created and added to the set.
Each time after calling getSCEV, the user will call the rewriteUsingPredicate
method.
We add two types of predicates
SCEVPredicateSet - implements a set of predicates
SCEVEqualPredicate - tests for equality between two SCEV expressions
We use the SCEVEqualPredicate to re-implement stride versioning. Every time we
version a stride, we will add a SCEVEqualPredicate to the context.
Instead of adding specific stride checks, LoopVectorize now adds a more
generic SCEV check.
We only need to add support for this in the LoopVectorizer since this is the
only pass that will do stride versioning.
Reviewers: mzolotukhin, anemet, hfinkel, sanjoy
Subscribers: sanjoy, hfinkel, rengolin, jmolloy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13595
llvm-svn: 251800
This revision has introduced an issue that only affects bootstrapped compiler
when it is printing the ASM. It turns out that the new code path taken due to
legalizing a scalar_to_vector of i64 -> v2i64 exposes a missing check in a
micro optimization to change a load followed by a scalar_to_vector into a
load and splat instruction on PPC.
llvm-svn: 251798
Summary:
The new function sys::path::user_cache_directory tries to discover
a directory suitable for cache storage for current system user.
On Windows and Darwin it returns a path to system-specific user cache directory.
On Linux it follows XDG Base Directory Specification, what is:
- use non-empty $XDG_CACHE_HOME env var,
- use $HOME/.cache.
Reviewers: chapuni, aaron.ballman, rafael
Subscribers: rafael, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D13801
llvm-svn: 251784
1. Added a set of public interfaces in InstrProfRecord
class to access (read/write) value profile data.
2. Changed IndexedProfile reader and writer code to
use the newly defined interfaces and hide implementation
details.
3. Added a couple of unittests for value profiling:
- Test new interfaces to get and set value profile data
- Test value profile data merging with various scenarios.
No functional change is expected. The new interfaces will also
make it possible to change on-disk format of value prof data
to be more compact (to be submitted).
llvm-svn: 251771
Have `getConstantEvolutionLoopExitValue` work correctly with multiple
entry loops.
As far as I can tell, `getConstantEvolutionLoopExitValue` never did the
right thing for multiple entry loops; and before r249712 it would
silently return an incorrect answer. r249712 changed SCEV to fail an
assert on a multiple entry loop, and this change fixes the underlying
issue.
llvm-svn: 251770
Optimized <8 x i32> to <8 x i16>
<4 x i64> to < 4 x i32>
<16 x i16> to <16 x i8>
All these oprtrations use now AVX512F set (KNL). Before this change it was implemented with AVX2 set.
Differential Revision: http://reviews.llvm.org/D14108
llvm-svn: 251764
This adds support for COFF I386. This is sufficient for code execution in a
32-bit JIT, though, imported symbols need to custom lowered for the redirection.
llvm-svn: 251761
Prevent `createNodeFromSelectLikePHI` from creating SCEV expressions
that break LCSSA.
A better fix for the same issue is to teach SCEVExpander to not break
LCSSA by inserting PHI nodes at appropriate places. That's planned for
the future.
Fixes PR25360.
llvm-svn: 251756
The initial coverage checking code for sample records failed to count
records inside inlined profiles. This change fixes the oversight.
llvm-svn: 251752
This is a bit ugly, but has a few advantages:
* Archive is now easy to copy since there is no Archive -> Child -> Archive
loop.
* It makes it clear that we already checked for errors when finding the Child
data.
llvm-svn: 251750
from its pass harness by providing a lambda to query for AA results.
This allows the legacy pass to easily provide a lambda that uses the
special helpers to construct function AA results from a legacy CGSCC
pass. With the new pass manager (the next patch) the lambda just
directly wraps the intuitive query API.
llvm-svn: 251715
Summary:
When forming expressions for phi nodes having an incoming value from
outside the loop A and a value coming from the previous iteration B
we were forming an AddRec if:
- B was an AddRec
- the value A was equal to the value for B at iteration -1 (or equal
to the value of B shifted by one iteration, at iteration 0)
In this case, we were computing the expression to be the expression of
B, shifted by one iteration.
This changes generalizes the logic above by removing the restriction that
B needs to be an AddRec. For this we introduce two expression rewriters
that allow us to
- shift an expression by one iteration
- get the value of an expression at iteration 0
This allows us to get SCEV expressions for PHI nodes when these expressions
are not AddRecExprs.
Reviewers: sanjoy
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D14175
llvm-svn: 251700
Update the discriminator assignment algorithm
* If a scope has already been assigned a discriminator, do not reassign a nested discriminator for it.
* If the file and line both match, even if the column does not match, we should assign a new discriminator for the stmt.
original code:
; #1 int foo(int i) {
; #2 if (i == 3 || i == 5) return 100; else return 99;
; #3 }
; i == 3: discriminator 0
; i == 5: discriminator 2
; return 100: discriminator 1
; return 99: discriminator 3
llvm-svn: 251689
Update the discriminator assignment algorithm
* If a scope has already been assigned a discriminator, do not reassign a nested discriminator for it.
* If the file and line both match, even if the column does not match, we should assign a new discriminator for the stmt.
original code:
; #1 int foo(int i) {
; #2 if (i == 3 || i == 5) return 100; else return 99;
; #3 }
; i == 3: discriminator 0
; i == 5: discriminator 2
; return 100: discriminator 1
; return 99: discriminator 3
llvm-svn: 251685
* If a scope has already been assigned a discriminator, do not reassign a nested discriminator for it.
* If the file and line both match, even if the column does not match, we should assign a new discriminator for the stmt.
original code:
; #1 int foo(int i) {
; #2 if (i == 3 || i == 5) return 100; else return 99;
; #3 }
; i == 3: discriminator 0
; i == 5: discriminator 2
; return 100: discriminator 1
; return 99: discriminator 3
llvm-svn: 251680
Introduce LLVMSymbolizer::symbolizeInlinedCode() instead of switching
on PrintInlining option passed to the constructor. This will be needed
once we retrun structured data (instead of std::string) from
LLVMSymbolizer and move printing logic out.
llvm-svn: 251675
Summary:
This is mostly NFC. It is a first step in cleaning up LLVMSymbolize
library. It removes "ModuleInfo" class which bundles together ObjectFile
and its debug info context in favor of:
* abstract SymbolizableModule in public headers;
* SymbolizableObjectFile subclass in implementation.
Additionally, SymbolizableObjectFile is now created via factory, so we
can properly detect object parsing error at this stage instead of keeping
the broken half-parsed object. As a next step, we would be able to
propagate the error all the way back to the library user.
Further improvements might include:
* factoring out the logic of finding appropriate file with debug info
for a given object file, and caching all parsed object files into a
separate class [A].
* factoring out DILineInfo rendering [B].
This would make what is now a heavyweight "LLVMSymbolizer" a relatively
straightforward class, that calls into [A] to turn filepath into a
SymbolizableModule, delegates actual symbolization to concrete SymbolizableModule
implementation, and lets [C] render the result.
Reviewers: dblaikie, echristo, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14099
llvm-svn: 251662
This patch generalizes the zeroing of vector elements with the BLEND instructions. Currently a zero vector will only blend if the shuffled elements are correctly inline, this patch recognises when a vector input is zero (or zeroable) and modifies a local copy of the shuffle mask to support a blend. As a zeroable vector input may not be all zeroes, the zeroable vector is regenerated if necessary.
Differential Revision: http://reviews.llvm.org/D14050
llvm-svn: 251659
transformations in FunctionAttrs rather than building a new one each
time.
This isn't trivial because there are different heuristics from different
passes for exactly what set they want. The primary difference is whether
an *overridable* function completely disables the synthesis of
attributes. I've modeled this by directly testing for overridable, and
using the common set that excludes external and opt-none functions.
This does cause some changes by disabling more optimizations in the face
of opt-none. Specifically, we were still optimizing *calls* to opt-none
functions based on their attributes, just not the bodies. It seems
better to be conservative on both fronts given the intended semanticas
here (best effort to not assume or disturb anything). I've not tried to
test this change as it seems complex, brittle, and not important to the
implicit contract of opt-none. Instead, it seems more like a choice that
should be dictated by the simplified implementation and the change to be
acceptable differences within the space of opt-none.
A big benefit here is that these transformations no longer rely on the
legacy pass manager's SCC types, they just work on generic sets of
function pointers. This will make it easy to re-use their logic in the
new pass manager.
I've also made the transforms static functions instead of members where
trivial while I was touching the signatures.
llvm-svn: 251640
This was discovered to be necessary while running memchr-01.ll with
-verify-machinstrs, because it is not allowed to have a phys reg live
accross block boundaries while on SSA form, if the register is
allocatable (expect in entry block and landing pads).
In this test case, stringRRE pseudos are expanded after isel by adding
a loop block which produces a live out CC register. To make the test
pass, it was also necessary to not say that StringRRELoop pseudo uses
R0L, this is only true for the StringRRE opcode.
-verify-machineinstrs added to memchr-01.ll test.
New test case int-cmp-51.ll to test that MachineCSE can eliminate
an identical compare (which it couldn't do before).
Reviewed by Ulrich Weigand
llvm-svn: 251634
Summary:
This commit resolves wrong opcodes for ll and sc instructions for r6 architecutres, which were generated in method MipsTargetLowering::emitAtomicBinary.
Author: Jelena.Losic
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13593
llvm-svn: 251629
Summary:
ARMv6KZ cores were set up incorrectly in ARM.td; also, the SMI mnemonic
(the old name for SMC, as defined in ARMv6KZ) wasn't supported.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14154
llvm-svn: 251627
This patch unify the 39-bit and 42-bit mapping for aarch64 to use only
one instrumentation algorithm. This removes compiler flag
SANITIZER_AARCH64_VMA requirement for MSAN on aarch64.
The mapping to use now is for 39 and 42-bits:
0x00000000000ULL-0x01000000000ULL MappingDesc::INVALID
0x01000000000ULL-0x02000000000ULL MappingDesc::SHADOW
0x02000000000ULL-0x03000000000ULL MappingDesc::ORIGIN
0x03000000000ULL-0x04000000000ULL MappingDesc::SHADOW
0x04000000000ULL-0x05000000000ULL MappingDesc::ORIGIN
0x05000000000ULL-0x06000000000ULL MappingDesc::APP
0x06000000000ULL-0x07000000000ULL MappingDesc::INVALID
0x07000000000ULL-0x08000000000ULL MappingDesc::APP
And only for 42-bits:
0x08000000000ULL-0x09000000000ULL MappingDesc::INVALID
0x09000000000ULL-0x0A000000000ULL MappingDesc::SHADOW
0x0A000000000ULL-0x0B000000000ULL MappingDesc::ORIGIN
0x0B000000000ULL-0x0F000000000ULL MappingDesc::INVALID
0x0F000000000ULL-0x10000000000ULL MappingDesc::APP
0x10000000000ULL-0x11000000000ULL MappingDesc::INVALID
0x11000000000ULL-0x12000000000ULL MappingDesc::APP
0x12000000000ULL-0x17000000000ULL MappingDesc::INVALID
0x17000000000ULL-0x18000000000ULL MappingDesc::SHADOW
0x18000000000ULL-0x19000000000ULL MappingDesc::ORIGIN
0x19000000000ULL-0x20000000000ULL MappingDesc::INVALID
0x20000000000ULL-0x21000000000ULL MappingDesc::APP
0x21000000000ULL-0x26000000000ULL MappingDesc::INVALID
0x26000000000ULL-0x27000000000ULL MappingDesc::SHADOW
0x27000000000ULL-0x28000000000ULL MappingDesc::ORIGIN
0x28000000000ULL-0x29000000000ULL MappingDesc::SHADOW
0x29000000000ULL-0x2A000000000ULL MappingDesc::ORIGIN
0x2A000000000ULL-0x2B000000000ULL MappingDesc::APP
0x2B000000000ULL-0x2C000000000ULL MappingDesc::INVALID
0x2C000000000ULL-0x2D000000000ULL MappingDesc::SHADOW
0x2D000000000ULL-0x2E000000000ULL MappingDesc::ORIGIN
0x2E000000000ULL-0x2F000000000ULL MappingDesc::APP
0x2F000000000ULL-0x39000000000ULL MappingDesc::INVALID
0x39000000000ULL-0x3A000000000ULL MappingDesc::SHADOW
0x3A000000000ULL-0x3B000000000ULL MappingDesc::ORIGIN
0x3B000000000ULL-0x3C000000000ULL MappingDesc::APP
0x3C000000000ULL-0x3D000000000ULL MappingDesc::INVALID
0x3D000000000ULL-0x3E000000000ULL MappingDesc::SHADOW
0x3E000000000ULL-0x3F000000000ULL MappingDesc::ORIGIN
0x3F000000000ULL-0x40000000000ULL MappingDesc::APP
And although complex it provides a better memory utilization that
previous one.
llvm-svn: 251624
Summary:
The microMIPS register class GPRMM16 does not contain the $zero register.
However, MipsSEDAGToDAGISel::replaceUsesWithZeroReg() would replace uses
of the $dst register:
[d]addiu, $dst, $zero, 0
with the $zero register, without checking for membership in the register
class of the target machine operand.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13984
llvm-svn: 251622
Since the verifier will give false reports if it incorrectly thinks MI is
loading or storing using an FI, it is necessary to scan memoperands and
find out how the FI is used in the instruction. This should be relatively
rare.
Needed to make CodeGen/SystemZ/spill-01.ll pass, which now runs with this flag.
Reviewed by Quentin Colombet.
llvm-svn: 251620
Summary:
Conversion opcode name format should be f64.convert_u/i64 not f64_convert_u
Author: s3ththompson
Reviewers: jfb
Subscribers: sunfish, jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D14160
llvm-svn: 251613
Clang driver now injects -u<hook_var> flag in the linker
command line, in which case user function is not needed
any more.
Differential Revision: http://reviews.llvm.org/D14033
llvm-svn: 251612
This was a layering violation in ScheduleDAGInstrs (and
MachineSchedulerBase) they both shouldn't know directly whether they are
used by the PostMachineScheduler or the MachineScheduler.
llvm-svn: 251608
Somewhat shockingly for an analysis pass which is computing constant ranges, LVI did not understand the ranges provided by range metadata.
As part of this change, I included a change to CVP primarily because doing so made it much easier to write small self contained test cases. CVP was previously only handling the non-local operand case, but given that LVI can sometimes figure out information about instructions standalone, I don't see any reason to restrict this. There could possibly be a compile time impact from this, but I suspect it should be minimal. If anyone has an example which substaintially regresses, please let me know. I could restrict the block local handling to ICmps feeding Terminator instructions if needed.
Note that this patch continues a somewhat bad practice in LVI. In many cases, we know facts about values, and separate context sensitive facts about values. LVI makes no effort to distinguish and will frequently cache the same value fact repeatedly for different contexts. I would like to change this, but that's a large enough change that I want it to go in separately with clear documentation of what's changing. Other examples of this include the non-null handling, and arguments.
As a meta comment: the entire motivation of this change was being able to write smaller (aka reasonable sized) test cases for a future patch teaching LVI about select instructions.
Differential Revision: http://reviews.llvm.org/D13543
llvm-svn: 251606
Follow on to http://reviews.llvm.org/D13074, implementing something pointed out by Sanjoy. His truth table from his comment on that bug summarizes things well:
LHS | RHS | LHS >=s RHS | LHS implies RHS
0 | 0 | 1 (0 >= 0) | 1
0 | 1 | 1 (0 >= -1) | 1
1 | 0 | 0 (-1 >= 0) | 0
1 | 1 | 1 (-1 >= -1) | 1
The key point is that an "i1 1" is the value "-1", not "1".
Differential Revision: http://reviews.llvm.org/D13756
llvm-svn: 251597
The most common use case is when eliminating redundant range checks in an example like the following:
c = a[i+1] + a[i];
Note that all the smarts of the transform (the implication engine) is already in ValueTracking and is tested directly through InstructionSimplify.
Differential Revision: http://reviews.llvm.org/D13040
llvm-svn: 251596
To be able to maximize the bandwidth during vectorization, this patch provides a new flag vectorizer-maximize-bandwidth. When it is turned on, the vectorizer will determine the vectorization factor (VF) using the smallest instead of widest type in the loop. To avoid increasing register pressure too much, estimates of the register usage for different VFs are calculated so that we only choose a VF when its register usage doesn't exceed the number of available registers.
llvm-svn: 251592
We cannot form ctr-based loops around function calls, including calls to
__tls_get_addr used for PIC TLS variables. References to such TLS variables,
however, might be buried within constant expressions, and so we need to search
the entire constant expression to be sure that no references to such TLS
variables exist.
Fixes PR25256, reported by Eric Schweitz. This is a slightly-modified version
of the patch suggested by Eric in the bug report, and a test case I created.
llvm-svn: 251582
As a follow-up to r251566, do the same for the other optionally-supported
register classes (mostly for vector registers). Don't return an unavailable
register class (which would cause an assert later), but fail cleanly when
provided an unsupported inline asm constraint.
llvm-svn: 251575
At the LLVM level this ABI is essentially a minimal modification of AAPCS to
support 16-byte alignment for vector types and the stack.
llvm-svn: 251570
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
This adds the flag -mllvm -sample-profile-check-coverage=N to the
SampleProfile pass. N is the percent of input sample records that the
user expects to apply. If the pass does not use N% (or more) of the
sample records in the input, it emits a warning.
This is useful to detect some forms of stale profiles. If the code has
drifted enough from the original profile, there will be records that do
not match the IR anymore.
This will not detect cases where a sample profile record for line L is
referring to some other instructions that also used to be at line L.
llvm-svn: 251568
It looks like this broke the stage 2 builder:
http://lab.llvm.org:8080/green/job/clang-stage2-configure-Rlto/6989/
Original commit message:
AliasSetTracker does not need to convert the access mode to ModRefAccess if the
new visited UnknownInst has only 'REF' modrefinfo to existing pointers in the
sets.
Patch by Andrew Zhogin!
llvm-svn: 251562
This teaches SCEV to compute //max// backedge taken counts for loops
like
for (int i = k; i != 0; i >>>= 1)
whatever();
SCEV yet cannot represent the exact backedge count for these loops, and
this patch does not change that. This is really geared towards teaching
SCEV that loops like the above are *not* infinite.
llvm-svn: 251558
Summary:
If P branches to Q conditional on C and Q branches to R conditional on
C' and C => C' then the branch conditional on C' can be folded to an
unconditional branch.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13972
llvm-svn: 251557
Add a couple of helper methods to make the primary
raw profile reader interface's implementation more
readable. It also hides more format details. This
patch has no functional change.
llvm-svn: 251546
The pass was keeping around a lot of per-function data (visited blocks,
edges, dominance, etc) that is just taking up memory for no reason. In
fact, from function to function it could potentially confuse the
propagator since some maps are indexed by line offsets which can be
common between functions.
llvm-svn: 251531
In getArgModRefInfo we consider all arguments as having MRI_ModRef.
However for arguments marked with readonly attribute we can return
more precise answer - MRI_Ref.
Differential Revision: http://reviews.llvm.org/D13992
llvm-svn: 251525
I think these were affected by a change way back when to stop printing newlines in Value::dump() by default. This change simply allows the debug output to be readable.
NFC.
llvm-svn: 251517
Summary:
This patch handles assembly and disassembly, but not codegen, as of yet.
Additionally, it fixes a bug whereby SP and PC as shifted-reg operands
were treated as predictable in ARMv7 Thumb; and it enables the tests
for invalid and unpredictable instructions to run on both ARMv7 and ARMv8.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14141
llvm-svn: 251516
When checking if an indirect global (a global with pointer type) is only assigned by allocation functions, first check if the global is itself initialized. If it is, it's not only assigned by allocation functions.
This fixes PR25309. Thanks to David Majnemer for reducing the test case!
llvm-svn: 251508
Derek Schuff