This patch is similar in spirit to https://reviews.llvm.org/D84480,
but does the maccatalyst/macosx disambiguation. I also took the
opportunity to factor out the gdb-remote packet log scanning used by
several testcases into lldbutil functions.
rdar://problem/66059257
Differential Revision: https://reviews.llvm.org/D84576
This patch basically moves the disambiguation code from a place where
it was complicated to implement straight to where the load command is
parsed, which has the neat side affect of actually supporting all call
sites!
rdar://problem/66011909
Differential Revision: https://reviews.llvm.org/D84480
This reverts commit 0da0437b2a to unbreak
the following tests:
lldb-api.tools/lldb-server.TestAppleSimulatorOSType.py
lldb-api.tools/lldb-server.TestGdbRemoteAttach.py
lldb-api.tools/lldb-server.TestGdbRemoteProcessInfo.py
lldb-api.tools/lldb-server.TestGdbRemoteRegisterState.py
lldb-api.tools/lldb-server.TestGdbRemoteThreadsInStopReply.py
lldb-api.tools/lldb-server.TestLldbGdbServer.py
debugserver and lldb
This patch improves the heuristics for correctly identifying simulator binaries on Darwin and adds support for simulators running on Apple Silicon.
rdar://problem/64046344
Differential Revision: https://reviews.llvm.org/D82616
The debugserver profile thread used to suspend itself between samples with
a usleep. When you detach or kill, MachProcess::Clear would delay replying
to the incoming packet until pthread_join of the profile thread returned.
If you are unlucky or the suspend delay is long, it could take longer than
the packet timeout for pthread_join to return. Then you would get an error
about detach not succeeding from lldb - even though in fact the detach was
successful...
I replaced the usleep with PThreadEvents entity. Then we just call a timed
WaitForEventBits, and when debugserver wants to stop the profile thread, it
can set the event bit, and the sleep will exit immediately.
Differential Revision: https://reviews.llvm.org/D75004
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
Adrian's changes to support Catalyst processes and my
changes to support debugserver running on an arm64_32
device (Apple Watch Series 4, which uses an IPL32 model
on arm64 cpus).
llvm-svn: 368118
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
to a process so we'll always get messages in the console logs.
Also make the "is frontboard process" / "is backboard process"
determination lazy, specifically take it out of the
MachProcess::AttachForDebug codepath when we are attaching to a
process, to simplify attaching.
<rdar://problem/47982516>
<rdar://problem/48060134>
llvm-svn: 354181
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
In one of the 2 places the LC_BUILD_VERSION load command is handled, there
is a bug preventing us from actually handling them (the address where to
read the load command was not updated). This patch factors reading the
deployment target load commands into a helper and adds testing for the 2
code paths calling the helper.
The testing is a little bit complicated because the only times those load
commands matter is when debugging a simulator process. I added a new
decorator to check that a specific SDK is available. The actual testing was
fairly easy once I knew how to run a simulated process.
Reviewers: jasonmolenda, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45298
llvm-svn: 329374
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
os name and version # from the mach-o binary as it scans the
header/load commands from memory and sends the details back
in the jGetLoadedDynamicLibrariesInfos response. lldb isn't
using these fields yet but I have a suspicion I'm going to
need them soon.
<rdar://problem/25251243>
llvm-svn: 274725
to find the solibs loaded in a process. Support two new ways of
sending the jGetLoadedDynamicLibrariesInfos packet to debugserver
and add a new jGetSharedCacheInfo packet. Update the documentation
for these packets as well. The changes to lldb to use these will
be a separate commit.
<rdar://problem/25251243>
llvm-svn: 274718
previous release. Most of the diffs are duplication in the xcode
project file caused by adding a "debugserver-mini" target. Jim
Ingham added support for a new SPI needed to request app launches
on iOS. Greg Clayton added code to indicate the platform of the
binary (macosx, ios, watchos, tvos) based on Mach-O load commands.
Jason Molenda added code so debugserver will identify when it is
running on a tvos/watchos device to lldb.
llvm-svn: 251091
major, minor, and patchlevel in the qHostInfo reply.
Document that qHostInfo may report major/minor/patch
separately / in addition to the version: combination.
<rdar://problem/22125465>
llvm-svn: 244716
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
325,000 breakpoints for running "breakpoint set --func-regex ." on lldb itself (after hitting a breakpoint at main so that LLDB.framework is loaded) used to take up to an hour to set, now we are down under a minute. With warm file caches, we are at 40 seconds, and that is with setting 325,000 breakpoint through the GDB remote API. Linux and the native debuggers might be faster. I haven't timed what how much is debug info parsing and how much is the protocol traffic to/from GDB remote.
That there were many performance issues. Most of them were due to storing breakpoints in the wrong data structures, or using the wrong iterators to traverse the lists, traversing the lists in inefficient ways, and not optimizing certain function name lookups/symbol merges correctly.
Debugging after that is also now very efficient. There were issues with replacing the breakpoint opcodes in memory that was read, and those routines were also fixed.
llvm-svn: 183820
number in RNBRemote::HandlePacket_qProcessInfo -- add a new
GetCurrentThreadMachPort() so callers who need to make a mach
thred_get_state() call at the RNBRemote level will have a way to
get the port number.
llvm-svn: 178619
Make it configurable what to profile.
For Mac, we don't use the dirty page size yet and hence there is no need to gather that. This should be way better in not draining the battery since we are operating between 0% to 0.1% on the Mac after this change.
llvm-svn: 176451
own port namepsace) as the thread identifier to using the system-wide
globally unique thread id as the thread identifier number.
MachThread.cpp keeps both the unique id and the mach port number
for each thread. All layers outside MachThread class use the unique
id with three exceptions: (1) Mach exceptions come in with the port
number (thread_port) which needs to be translated, (2) any calls to
low-level thread_get_state/thread_set_state/thread_suspend etc need
to use the mach port number, (3) MachThreadList::UpdateThreadList
which creates the MachThread objects gets the unique id and passes
it to the MachThread ctor as an argument.
In general, any time nub_thread_t is used, it is now referring to a
unique thread id. Any time a thread_t is used, it is now referring
to a mach port number. There was some interchangability of these
types previously. nub_thread_t has also been changed to a 64-bit
type which necessitated some printf specification string changes.
I haven't been able to test these changes extensively yet but want
to checkpoint the work. The scenarios I've been testing are all
working correctly so while there may be some corner cases I haven't
hit yet, I think it is substantially correct.
<rdar://problem/12931414>
llvm-svn: 175870
Prevent profiling from working on older debugserver. Just a simple renaming since the caller is prepared to handle the ‘unimplemented’ answer.
llvm-svn: 172583
Prevent async and sync calls to get profile data from stomping on each other.
At the same time, don't use '$' as end delimiter per chunk of profile data.
llvm-svn: 168948
calling functions. This is necessary on Mac OS X, since bad things can happen if you set
the registers of a thread that's sitting in a kernel trap.
<rdar://problem/11145013>
llvm-svn: 160756
Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.
llvm-svn: 157345
from a process and hooked it up to the new packet that was recently added
to our GDB remote executable named debugserver. Now Process has the following
new calls:
virtual Error
Process::GetMemoryRegionInfo (lldb::addr_t load_addr, MemoryRegionInfo &range_info);
virtual uint32_t
GetLoadAddressPermissions (lldb::addr_t load_addr);
Only the first one needs to be implemented by subclasses that can add this
support.
Cleaned up the way the new packet was implemented in debugserver to be more
useful as an API inside debugserver. Also found an error where finding a region
for an address actually will pick up the next region that follows the address
in the query so we also need ot make sure that the address we requested the
region for falls into the region that gets returned.
llvm-svn: 144976
Add a more general purpose qMemoryRegionInfo packet which can
describe various attributes about a memory region. Currently it
will return the start address, size, and permissions (read, write,
executable) for the memory region. It may be possible to add
additional attributes in the future such as whether the region is
designated as stack memory or jitted code a la vmmap.
I still haven't implemented the lldb side of the code to use this
packet yet so there may be unexpected behavior - but the basic implementation looks
about right. I'll hook it up to lldb soon and fix any problems that crop up.
llvm-svn: 144175
whether a given address is in an executable region of memory or
not. I haven't written the lldb side that will use this packet it
hasn't been tested yet but it's a simple enough bit of code.
I want to have this feature available for the unwinder code. When
we're stopped at an address with no valid symbol context, there are
a number of questions I'd like to ask --
is the current pc value in an executable region (e.g. did they
jump to unallocated/unexecutable memory? we know how to unwind
from here if so.)
Is the stack pointer or the frame pointer the correct register
to use to find the caller's saved pc value?
Once we're past the first frame we can trust things like eh_frame
and ABI unwind schemes but the first frame is challenging and having
a way to check potential addresses to see if they're executable or
not would help narrow down the possibilities a lot.
llvm-svn: 144074
Modifed lldb_private::Process to be able to handle connecting to a remote
target that isn't running a process. This leaves lldb_private::Process in the
eStateConnected state from which we can then do an attach or launch.
Modified ProcessGDBRemote to be able to set stdin, stdout, stderr, working
dir, disable ASLR and a few other settings down by using new GDB remote
packets. This allows us to keep all of our current launch flags and settings
intact and still be able to communicate them over to the remote GDB server.
Previously these were being sent as arguments to the debugserver binary that
we were spawning. Also modified ProcessGDBRemote to handle losing connection
to the remote GDB server and always exit immediately. We do this by watching
the lldb_private::Communication event bit for the read thread exiting in the
ProcessGDBRemote async thread.
Added support for many of the new 'Q' packets for setting stdin, stdout,
stderr, working dir and disable ASLR to the GDBRemoteCommunication class for
easy accesss.
Modified debugserver for all of the new 'Q' packets and also made it so that
debugserver always exists if it loses connection with the remote debugger.
llvm-svn: 126444
checking the validity of the shared pointer prior to using it.
Fixed the GDB remote plug-in to once again watch for a reply from the "k"
packet, and fixed the logic to make sure the thread requesting the kill
and the async thread play nice (and very quickly) by synchronizing the
packet sending and reply. I also tweaked some of the shut down packet
("k" kill, "D" detach, and the halt packet) to make sure they do the right
thing.
Fixed "StateType Process::WaitForProcessStopPrivate (...)" to correctly pass
the timeout along to WaitForStateChangedEventsPrivate() and made the function
behave correctly with respect to timing out.
Added separate STDIN, STDOUT, and STDERR support to debugserver. Also added
the start of being able to set the working directory for the inferior process.
llvm-svn: 124049
500 ms.
Make MachThreadList more threadsafe.
Added code to make sure the thread register state was properly flushed for x86_64.
Fixed an missing return code for the current thread in the new thread suffix code.
Improved debugserver logging.
llvm-svn: 123815
I added support for asking if the GDB remote server supports thread suffixes
for packets that should be thread specific (register read/write packets) because
the way the GDB remote protocol does it right now is to have a notion of a
current thread for register and memory reads/writes (set via the "$Hg%x" packet)
and a current thread for running ("$Hc%x"). Now we ask the remote GDB server
if it supports adding the thread ID to the register packets and we enable
that feature in LLDB if supported. This stops us from having to send a bunch
of packets that update the current thread ID to some value which is prone to
error, or extra packets.
llvm-svn: 123762
inferior to be launched without setting up terminal stdin/stdout for it
(leaving the lldb command line accessible while the program is executing).
Also add a user settings variable, 'target.process.disable-stdio' to allow
the user to set this globally rather than having to use the command option
each time the process is launched.
llvm-svn: 120825
to the DoHalt down in ProcessGDBRemote. I also moved the functionality that
was in ProcessGDBRemote::DoHalt up into Process::Halt so not every class has
to implement a tricky halt/resume on the internal state thread. The
functionality is the same as it was before with two changes:
- when we eat the event we now just reuse the event we consume when the private
state thread is paused and set the interrupted bool on the event if needed
- we also properly update the Process::m_public_state with the state of the
event we consume.
Prior to this, if you issued a "process halt" it would eat the event, not
update the process state, and then produce a new event with the interrupted
bit set and send it. Anyone listening to the event would get the stopped event
with a process that whose state was set to "running".
Fixed debugserver to not have to be spawned with the architecture of the
inferior process. This worked fine for launching processes, but when attaching
to processes by name or pid without a file in lldb, it would fail.
Now debugserver can support multiple architectures for a native debug session
on the current host. This currently means i386 and x86_64 are supported in
the same binary and a x86_64 debugserver can attach to a i386 executable.
This change involved a lot of changes to make sure we dynamically detect the
correct registers for the inferior process.
llvm-svn: 119680
ptrace thread update that was replying to the SIGSTOP was also causing the
process to not really be sigstop'd any more so then the call to ptrace
detach was failing, and when debugserver exited the attached process
was being killed. Now the ptrace thread update does not disturb the sigstop
state of the thread, so the detach works properly.
llvm-svn: 118018
Adrian Prantl