After D76797 the dominator tree is no longer used in LVI, so we
can remove it as a pass dependency, and also get rid of the
dominator tree enabling/disabling logic in JumpThreading.
Apart from cleaning up the code, this also clarifies LVI
cache consistency, in that the LVI cache can no longer
depend on whether the DT was or wasn't enabled due to
pending DT updates at any given time.
Differential Revision: https://reviews.llvm.org/D76985
r119493 protected against PHINode::hasConstantValue returning the PHI
node itself, but a later fix in r159687 means that can never happen, so
the workarounds are no longer required.
Now that load/store have required alignment, accept Align here.
This also avoids uses of getPointerElementType(), which is
incompatible with opaque pointers.
Now that load/store alignment is required, we no longer need most
of them. Also switch the getLoadStoreAlignment() helper to return
Align instead of MaybeAlign.
LVI and its consumers currently have quite a bit of complexity
related to dominator tree management. However, it doesn't look
like it is actually needed...
The only use of the dominator tree is inside isValidAssumeForContext().
However, due to the way LVI queries work, it is not needed:
If we query a value for some block, we will first get the edge values
from all predecessor blocks, which also includes an intersection with
assumptions that apply to the terminator of the predecessor. As such,
we will already have processed all assumptions from predecessor blocks
(this is actually stronger than what isValidAssumeForContext() does
with a DT, because this is capable of combining non-dominating
assumptions). The only additional assumptions we need to take into
account are those in the block being queried. And we don't need a
dominator tree for that.
This patch only removes the use of DT, I will drop the machinery
around it in a followup.
Differential Revision: https://reviews.llvm.org/D76797
computeKnownBitsFromAssume() currently asserts if m_V matches a
ptrtoint that changes the bitwidth. Because InstCombine
canonicalizes ptrtoint instructions to use explicit zext/trunc,
we never ran into the issue in practice. I'm adding unit tests,
as I don't know if this can be triggered via IR anywhere.
Fix this by calling anyextOrTrunc(BitWidth) on the computed
KnownBits. Note that we are going from the KnownBits of the
ptrtoint result to the KnownBits of the ptrtoint operand,
so we need to truncate if the ptrtoint zexted and anyext if
the ptrtoint truncated.
Differential Revision: https://reviews.llvm.org/D79234
This reverts commit 454de99a6f.
The problem was that one of the ctor arguments of CallAnalyzer was left
to be const std::function<>&. A function_ref was passed for it, and then
the ctor stored the value in a function_ref field. So a std::function<>
would be created as a temporary, and not survive past the ctor
invocation, while the field would.
Tested locally by following https://github.com/google/sanitizers/wiki/SanitizerBotReproduceBuild
Original Differential Revision: https://reviews.llvm.org/D79917
Summary:
This change exposes the vector name mangling with LLVM ISA (used as part
of vector-function-abi-variant) as a utility.
This can then be used by front-ends that add this attribute.
Note that all parameters passed in to the function will be mangled with
the "v" token to identify that they are of of vector type. So, it is the
responsibility of the caller to confirm that all parameters in the
vectorized variant is of vector type.
Added unit test to show vector name mangling.
Reviewed-By: fpetrogalli, simoll
Differential Revision: https://reviews.llvm.org/D79867
Summary:
Replacing uses of std::function pointers or refs, or Optional, to
function_ref, since the usage pattern allows that. If the function is
optional, using a default parameter value (nullptr). This led to a few
parameter reshufles, to push all optionals to the end of the parameter
list.
Reviewers: davidxl, dblaikie
Subscribers: arsenm, jvesely, nhaehnle, eraman, hiraditya, haicheng, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79917
Summary:
This change introduces InliningAdvisor (and related APIs), the interface
that abstracts decision making away from the inlining pass. We will use
this interface to delegate decision making to a trained ML model,
subsequently (see referenced RFC).
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, eraman, dblaikie
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79042
Summary:
Analyses that are statefull should not be retrieved through a proxy from
an outer IR unit, as these analyses are only invalidated at the end of
the inner IR unit manager.
This patch disallows getting the outer manager and provides an API to
get a cached analysis through the proxy. If the analysis is not
stateless, the call to getCachedResult will assert.
Reviewers: chandlerc
Subscribers: mehdi_amini, eraman, hiraditya, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72893
This patch adds a new TTI hook to allow targets to tell LSR that
a chain including some instruction is already profitable and
should not be optimized. This patch also adds an implementation
of this TTI hook for ARM so LSR doesn't optimize chains that include
the VCTP intrinsic.
Differential Revision: https://reviews.llvm.org/D79418
Hide the method that allows setting probability for particular
edge and introduce a public method that sets probabilities for
all outgoing edges at once.
Setting individual edge probability is error prone. More over
it is difficult to check that the total probability is 1.0
because there is no easy way to know when the user finished
setting all the probabilities.
Reviewers: yamauchi, ebrevnov
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79396
Summary:
This fixes PR45885 by fixing isGuaranteedNotToBeUndefOrPoison so it does not look into dominating
branch conditions of V when V is an instruction in an unreachable block.
Reviewers: spatel, nikic, lebedev.ri
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79790
Summary:
This patch makes propagatesPoison be more accurate by returning true on
more bin ops/unary ops/casts/etc.
The changed test in ScalarEvolution/nsw.ll was introduced by
a19edc4d15 .
IIUC, the goal of the tests is to show that iv.inc's SCEV expression still has
no-overflow flags even if the loop isn't in the wanted form.
It becomes more accurate with this patch, so think this is okay.
Reviewers: spatel, lebedev.ri, jdoerfert, reames, nikic, sanjoy
Reviewed By: spatel, nikic
Subscribers: regehr, nlopes, efriedma, fhahn, javed.absar, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78615
Summary:
This patch makes shouldBeDeferred static because it is called only
from shouldInline in the same .cpp file.
Reviewers: davidxl, mtrofin
Reviewed By: mtrofin
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79750
Summary:
this patch fixe crash/asserts found in the test-suite.
the AssumeptionCache cannot be assumed to have all assumes contrary to what i tought.
prevent generation of information for terminators, because this can create broken IR in transfromation where we insert the new terminator before removing the old one.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79458
don't span their entire scope.
The previous commit (6d1c40c171) is an older version of the test.
Reviewed By: aprantl, vsk
Differential Revision: https://reviews.llvm.org/D79573
Summary: with this patch the assume salvageKnowledge will not generate assume if all knowledge is already available in an assume with valid context. assume bulider can also in some cases update an existing assume with better information.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78014
Currently LAA's uses of ScalarEvolutionExpander blocks moving the
expander from Analysis to Transforms. Conceptually the expander does not
fit into Analysis (it is only used for code generation) and
runtime-check generation also seems to be better suited as a
transformation utility.
Reviewers: Ayal, anemet
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D78460
In order to reduce the API surface area (preparation for D78460), remove
a addRuntimeChecks() function and do the additional check in the single
caller.
Reviewers: Ayal, anemet
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D79679
them in a special text section.
For sampleFDO, because the optimized build uses profile generated from
previous release, previously we couldn't tell a function without profile
was truely cold or just newly created so we had to treat them conservatively
and put them in .text section instead of .text.unlikely. The result was when
we persuing the best performance by locking .text.hot and .text in memory,
we wasted a lot of memory to keep cold functions inside.
In https://reviews.llvm.org/D66374, we introduced profile symbol list to
discriminate functions being cold versus functions being newly added.
This mechanism works quite well for regular use cases in AutoFDO. However,
in some case, we can only have a partial profile when optimizing a target.
The partial profile may be an aggregated profile collected from many targets.
The profile symbol list method used for regular sampleFDO profile is not
applicable to partial profile use case because it may be too large and
introduce many false positives.
To solve the problem for partial profile use case, we provide an option called
--profile-unknown-in-special-section. For functions without profile, we will
still treat them conservatively in compiler optimizations -- for example,
treat them as warm instead of cold in inliner. When we use profile info to
add section prefix for functions, we will discriminate functions known to be
not cold versus functions without profile (being unknown), and we will put
functions being unknown in a special text section called .text.unknown.
Runtime system will have the flexibility to decide where to put the special
section in order to achieve a balance between performance and memory saving.
Differential Revision: https://reviews.llvm.org/D62540
No changes relative to last time, but after a mitigation for
an AMDGPU regression landed.
---
If SimplifyInstruction() does not succeed in simplifying the
instruction, it will compute the known bits of the instruction
in the hope that all bits are known and the instruction can be
folded to a constant. I have removed a similar optimization
from InstCombine in D75801, and would like to drop this one as well.
On average, we spend ~1% of total compile-time performing this
known bits calculation. However, if we introduce some additional
statistics for known bits computations and how many of them succeed
in simplifying the instruction we get (on test-suite):
instsimplify.NumKnownBits: 216
instsimplify.NumKnownBitsComputed: 13828375
valuetracking.NumKnownBitsComputed: 45860806
Out of ~14M known bits calculations (accounting for approximately
one third of all known bits calculations), only 0.0015% succeed in
producing a constant. Those cases where we do succeed to compute
all known bits will get folded by other passes like InstCombine
later. On test-suite, only lencod.test and GCC-C-execute-pr44858.test
show a hash difference after this change. On lencod we see an
improvement (a loop phi is optimized away), on the GCC torture
test a regression (a function return value is determined only
after IPSCCP, preventing propagation from a noinline function.)
There are various regressions in InstSimplify tests. However, all
of these cases are already handled by InstCombine, and corresponding
tests have already been added there.
Differential Revision: https://reviews.llvm.org/D79294
Summary:
This patch fix the following issues with visitExtractElementInst:
1. Restrict VectorUtils::findScalarElement to fixed-length vector.
For scalable type, the number of elements in shuffle mask is
unknown at compile-time.
2. Fix out-of-range calculation for fixed-length vector.
3. Skip scalable type when analysis rely on fixed number of elements.
4. Add unit tests to check functionality of extractelement for scalable type.
Reviewers: sdesmalen, efriedma, spatel, nikic
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78267
Summary:
This helps detect some missed BFI updates during CodeGenPrepare.
This is debug build only and disabled behind a flag.
Fix a missed update in CodeGenPrepare::dupRetToEnableTailCallOpts().
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77417
Summary:
Any function in this module that make use of DemandedElts laregely does
not work with scalable vectors. DemandedElts is used to define which
elements of the vector to look at. At best, for scalable vectors, we can
express the first N elements of the vector. However, in practice, most
code that uses these functions expect to be able to talk about the
entire vector. In principle, this module should be able to be extended
to work with scalable vectors. However, before we can do that, we should
ensure that it does not cause code with scalable vectors to miscompile.
All functions that use a DemandedElts will bail out if the vector is
scalable. Usages of getNumElements() are updated to go through
FixedVectorType pointers.
Reviewers: rengolin, efriedma, sdesmalen, c-rhodes, spatel
Reviewed By: efriedma
Subscribers: david-arm, tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79053
The 'nsz' flag is different than 'nnan' or 'ninf' in that it does not create poison.
Make that explicit in the LangRef and fix ValueTracking analysis that misinterpreted
the definition.
This manifests as bugs in InstSimplify shown in the test diffs and as discussed in
PR45778:
https://bugs.llvm.org/show_bug.cgi?id=45778
Differential Revision: https://reviews.llvm.org/D79422
getScalarizationOverhead is only ever called with vectors (and we already had a load of cast<VectorType> calls immediately inside the functions).
Followup to D78357
Reviewed By: @samparker
Differential Revision: https://reviews.llvm.org/D79341
Make the kind of cost explicit throughout the cost model which,
apart from making the cost clear, will allow the generic parts to
calculate better costs. It will also allow some backends to
approximate and correlate the different costs if they wish. Another
benefit is that it will also help simplify the cost model around
immediate and intrinsic costs, where we currently have multiple APIs.
RFC thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141263.html
Differential Revision: https://reviews.llvm.org/D79002
If SimplifyInstruction() does not succeed in simplifying the
instruction, it will compute the known bits of the instruction
in the hope that all bits are known and the instruction can be
folded to a constant. I have removed a similar optimization
from InstCombine in D75801, and would like to drop this one as well.
On average, we spend ~1% of total compile-time performing this
known bits calculation. However, if we introduce some additional
statistics for known bits computations and how many of them succeed
in simplifying the instruction we get (on test-suite):
instsimplify.NumKnownBits: 216
instsimplify.NumKnownBitsComputed: 13828375
valuetracking.NumKnownBitsComputed: 45860806
Out of ~14M known bits calculations (accounting for approximately
one third of all known bits calculations), only 0.0015% succeed in
producing a constant. Those cases where we do succeed to compute
all known bits will get folded by other passes like InstCombine
later. On test-suite, only lencod.test and GCC-C-execute-pr44858.test
show a hash difference after this change. On lencod we see an
improvement (a loop phi is optimized away), on the GCC torture
test a regression (a function return value is determined only
after IPSCCP, preventing propagation from a noinline function.)
There are various regressions in InstSimplify tests. However, all
of these cases are already handled by InstCombine, and corresponding
tests have already been added there.
Differential Revision: https://reviews.llvm.org/D79294
The more general fold was not poison-safe, so it was removed:
rG5486e00
...but it is ok to have this transform if analysis can determine
the vector contains no poison. The test shows a simple example
of that: constant integer elements are not poison.
PR45481:
https://bugs.llvm.org/show_bug.cgi?id=45481
SDAG has an identical transform to this, so there's little
chance of any real-world impact. OTOH, that means we are
effectively sweeping the bug out of sight because poison
exists in codegen too.
The assert checks that every instruction must be annotated by this point while it is not
necessary. If the inlining process was interrupted because the threshold was reached, the rest
of the instructions would not be annotated which triggers the assert.
The added test shows the situation in which it can happen.
This is a recommit as the original commit fail due to the absence of REQUIRES: assert in the test.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D79107
Summary:
By design 'BranchProbabilityInfo:: getEdgeProbability(const BasicBlock *Src, const BasicBlock *Dst) const' should return sum of probabilities over all edges from Src to Dst. Current implementation is buggy and returns 1/num_of_successors if probabilities are not explicitly set.
Note current implementation of BPI printing has an issue as well and annotates each edge with sum of probabilities over all ages from one basic block to another. That's why 30% probability reported (instead of 10%) in the lit test. This is not urgent issue since only printing is affected.
Note also current implementation assumes that either all or none edges have probabilities set. This is not the only place which uses such assumption. At least we should assert that in verifier. In addition we can think on a more robust API of BPI which would prevent situations.
Reviewers: skatkov, yrouban, taewookoh
Reviewed By: skatkov
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79071
Summary: Currenlty BPI unconditionally creates post dominator tree each time. While this is not incorrect we can save compile time by reusing existing post dominator tree (when it's valid) provided by analysis manager.
Reviewers: skatkov, taewookoh, yrouban
Reviewed By: skatkov
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78987
Summary:
A valid DominatorTree is needed to do PhiTranslation.
Before this patch, a MemoryUse could be optimized to an access outside a loop, while the address it loads from is modified in the loop.
This can lead to a miscompile.
Reviewers: george.burgess.iv
Subscribers: Prazek, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79068
The assert checks that every instruction must be annotated by this point while it is not
necessary. If the inlining process was interrupted because the threshold was reached, the rest
of the instructions would not be annotated which triggers the assert.
The added test shows the situation in which it can happen.
Reviewed-By: mtrofin
Diff: https://reviews.llvm.org/D79107
The improvements to the x86 vector insert/extract element costs in D74976 resulted in the estimated costs for vector initialization and scalarization increasing higher than should be expected. This is particularly noticeable on pre-SSE4 targets where the available of legal INSERT_VECTOR_ELT ops is more limited.
This patch does 2 things:
1 - it implements X86TTIImpl::getScalarizationOverhead to more accurately represent the typical costs of a ISD::BUILD_VECTOR pattern.
2 - it adds a DemandedElts mask to getScalarizationOverhead to permit the SLP's BoUpSLP::getGatherCost to be rewritten to use it directly instead of accumulating raw vector insertion costs.
This fixes PR45418 where a v4i8 (zext'd to v4i32) was no longer vectorizing.
A future patch should extend X86TTIImpl::getScalarizationOverhead to tweak the EXTRACT_VECTOR_ELT scalarization costs as well.
Reviewed By: @craig.topper
Differential Revision: https://reviews.llvm.org/D78216
This allows forward declarations of PointerCheck, which in turn reduce
the number of times LoopAccessAnalysis needs to be included.
Ultimately this helps with moving runtime check generation to
Transforms/Utils/LoopUtils.h, without having to include it there.
Reviewers: anemet, Ayal
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D78458
There are several different types of cost that TTI tries to provide
explicit information for: throughput, latency, code size along with
a vague 'intersection of code-size cost and execution cost'.
The vectorizer is a keen user of RecipThroughput and there's at least
'getInstructionThroughput' and 'getArithmeticInstrCost' designed to
help with this cost. The latency cost has a single use and a single
implementation. The intersection cost appears to cover most of the
rest of the API.
getUserCost is explicitly called from within TTI when the user has
been explicit in wanting the code size (also only one use) as well
as a few passes which are concerned with a mixture of size and/or
a relative cost. In many cases these costs are closely related, such
as when multiple instructions are required, but one evident diverging
cost in this function is for div/rem.
This patch adds an argument so that the cost required is explicit,
so that we can make the important distinction when necessary.
Differential Revision: https://reviews.llvm.org/D78635
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Summary:
Extending the Function::viewCFG prototypes to allow for printing block probability info in form of .dot files during debugging.
Also avoiding an AV when no BFI/BPI available.
Reviewers: wenlei, davidxl, knaumov
Reviewed By: wenlei, davidxl
Subscribers: MaskRay, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77978
The change in D78624 had a noticeable negative compile-time impact.
It seems that going through a function call for the MaxUsesToExplore
default is fairly expensive, at least if LLVM is not built with LTO.
This patch makes MaxUsesToExpore default to 0 and assigns the actual
default in the implementation instead. This recovers most of the
regression.
Differential Revision: https://reviews.llvm.org/D78734
Summary:
This patch helps isGuaranteedNotToBeUndefOrPoison look into more constants and instructions (bitcast/alloca/gep/fcmp).
To deal with bitcast, Depth is added to isGuaranteedNotToBeUndefOrPoison.
This patch is splitted from https://reviews.llvm.org/D75808.
Checked with Alive2
Reviewers: reames, jdoerfert
Reviewed By: jdoerfert
Subscribers: sanwou01, spatel, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76010
Currently an unknown/undef value is marked as overdefined when merged
with an empty range. An empty range can occur in unreachable/dead code.
When merging the new unknown state (= no value known yet) with an empty
range, there still isn't any information about the value yet and we can
stay in unknown.
This gives a few nice improvements on the number of instructions removed
by IPSCCP:
Same hash: 170 (filtered out)
Remaining: 67
Metric: sccp.IPNumInstRemoved
Program base patch diff
test-suite...rks/FreeBench/mason/mason.test 3.00 6.00 100.0%
test-suite...nchmarks/McCat/18-imp/imp.test 3.00 5.00 66.7%
test-suite...C/CFP2000/179.art/179.art.test 2.00 3.00 50.0%
test-suite...ijndael/security-rijndael.test 2.00 3.00 50.0%
test-suite...ks/Prolangs-C/agrep/agrep.test 40.00 58.00 45.0%
test-suite...ce/Applications/Burg/burg.test 26.00 37.00 42.3%
test-suite...cCat/03-testtrie/testtrie.test 3.00 4.00 33.3%
test-suite...Source/Benchmarks/sim/sim.test 29.00 36.00 24.1%
test-suite.../Applications/spiff/spiff.test 9.00 11.00 22.2%
test-suite...s/FreeBench/neural/neural.test 5.00 6.00 20.0%
test-suite...pplications/treecc/treecc.test 66.00 79.00 19.7%
test-suite...langs-C/football/football.test 85.00 101.00 18.8%
test-suite...ce/Benchmarks/PAQ8p/paq8p.test 90.00 105.00 16.7%
test-suite...oxyApps-C++/miniFE/miniFE.test 37.00 43.00 16.2%
test-suite...rks/FreeBench/pifft/pifft.test 26.00 30.00 15.4%
test-suite...lications/sqlite3/sqlite3.test 481.00 548.00 13.9%
test-suite...marks/7zip/7zip-benchmark.test 4875.00 5522.00 13.3%
test-suite.../CINT2000/176.gcc/176.gcc.test 1117.00 1197.00 7.2%
test-suite...0.perlbench/400.perlbench.test 1618.00 1732.00 7.0%
Reviewers: efriedma, nikic, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78667
Summary:
refactor assume bulider for the next patch.
the assume builder now generate only one assume per attribute kind and per value they are on. to do this it takes the highest. this is desirable because currently, for all attributes the higest value is the most valuable.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78013
Summary:
llvm::getInlineCost starts off by determining whether inlining should
happen or not because of user directives or easily determinable
unviability. This CL refactors this functionality as a reusable API.
Reviewers: davidxl, eraman
Reviewed By: davidxl, eraman
Subscribers: hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73825
The motivation is to be able to play with the option and change if it is required.
Reviewers: fedor.sergeev, apilipenko, rnk, jdoerfert
Reviewed By: fedor.sergeev
Subscribers: hiraditya, dantrushin, llvm-commits
Differential Revision: https://reviews.llvm.org/D78624
Summary:
This is RFC for fixes in poison-related functions of ValueTracking.
These functions assume that a value can be poison bitwisely, but the semantics
of bitwise poison is not clear at the moment.
Allowing a value to have bitwise poison adds complexity to reasoning about
correctness of optimizations.
This patch makes the analysis functions simply assume that a value is
either fully poison or not, which has been used to understand the correctness
of a few previous optimizations.
The bitwise poison semantics seems to be only used by these functions as well.
In terms of implementation, using value-wise poison concept makes existing
functions do more precise analysis, which is what this patch contains.
Reviewers: spatel, lebedev.ri, jdoerfert, reames, nikic, nlopes, regehr
Reviewed By: nikic
Subscribers: fhahn, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78503
Summary:
This is RFC for fixes in poison-related functions of ValueTracking.
These functions assume that a value can be poison bitwisely, but the semantics
of bitwise poison is not clear at the moment.
Allowing a value to have bitwise poison adds complexity to reasoning about
correctness of optimizations.
This patch makes the analysis functions simply assume that a value is
either fully poison or not, which has been used to understand the correctness
of a few previous optimizations.
The bitwise poison semantics seems to be only used by these functions as well.
In terms of implementation, using value-wise poison concept makes existing
functions do more precise analysis, which is what this patch contains.
Reviewers: spatel, lebedev.ri, jdoerfert, reames, nikic, nlopes, regehr
Reviewed By: nikic
Subscribers: fhahn, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78503
This API call has been used recently with, a very valid, expectation
that it would do something useful but it doesn't actually query any
backend information. So, remove this method and merge its
functionality into getUserCost. As well as that, also use
getCastInstrCost to get a proper cost from the backend for the
concerned instructions though we only currently return the answer if
it's considered free. The default implementation now also checks
int/ptr conversions too, as well as truncs and bitcasts.
Differential Revision: https://reviews.llvm.org/D76124
Use Instruction::comesBefore() instead of OrderedInstructions
inside InstructionPrecedenceTracking. This also removes the
dominator tree dependency.
Differential Revision: https://reviews.llvm.org/D78461
DelSet was used to avoid invalidating the current iterator while
modifying the map we are iterating over.
By using an early_inc_range, (which increments to iterator 'early',
allowing us to remove the current element), we can get rid of DelSet.
Reviewers: gilr, rengolin, Ayal, hsaito
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D78420
The API for shuffles and reductions uses generic Type parameters,
instead of VectorType, and so assertions and casts are used a lot.
This patch makes those types explicit, which means that the clients
can't be lazy, but results in less ambiguity, and that can only be a
good thing.
Bugzilla: https://bugs.llvm.org/show_bug.cgi?id=45562
Differential Revision: https://reviews.llvm.org/D78357
Drop visitCallInst/visitInvokeInst since the generic implementation
will delegate to visitCallBase. They appear to be from a time
before visitCallSite existed in the InstVisitor system.
Differential Revision: https://reviews.llvm.org/D78448
As suggested on D76788, this switches the LVI implementation to
return Optional<ValueLatticeElement> from various methods, instead
of passing in a ValueLatticeElement reference and returning a boolean.
Differential Revision: https://reviews.llvm.org/D78383
Cost-modeling decisions are tied to the compute interleave groups
(widening decisions, scalar and uniform values). When invalidating the
interleave groups, those decisions also need to be invalidated.
Otherwise there is a mis-match during VPlan construction.
VPWidenMemoryRecipes created initially are left around w/o converting them
into VPInterleave recipes. Such a conversion indeed should not take place,
and these gather/scatter recipes may in fact be right. The crux is leaving around
obsolete CM_Interleave (and dependent) markings of instructions along with
their costs, instead of recalculating decisions, costs, and recipes.
Alternatively to forcing a complete recompute later on, we could try
to selectively invalidate the decisions connected to the interleave
groups. But we would likely need to run the uniform/scalar value
detection parts again anyways and the extra complexity is probably not
worth it.
Fixes PR45572.
Reviewers: gilr, rengolin, Ayal, hsaito
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D78298
This patch combines the "has" and "get" parts of the cache access.
getCachedValueInfo() now both sets the BBLV return argument, and
returns whether the value was found.
Additionally, the management of the work stack is now integrated
into getBlockValue(). If the value is not cached yet, we try to
push to the stack (and return false, indicating that we need to
solve first), or return overdefined in case of a cycle.
These changes a) avoid a duplicate cache lookup for has & get and
b) ensure that the logic is uniform everywhere. For this reason
this change is also not quite NFC, because previously overdefined
values from the cache, and overdefined values from a cycle received
different treatment when it came to assumption intersection.
Differential Revision: https://reviews.llvm.org/D76788
I uploaded the old version accidentally instead of the one with these
minor adjustments requested by the reviewers.
Differential Revision: https://reviews.llvm.org/D77855
Summary:
We can and should remove deleted nodes from their respective SCCs. We
did not do this before and this was a potential problem even though I
couldn't locally trigger an issue. Since the `DeleteNode` would assert
if the node was not in the SCC, we know we only remove nodes from their
SCC and only once (when run on all the Attributor tests).
Reviewers: lebedev.ri, hfinkel, fhahn, probinson, wristow, loladiro, sstefan1, uenoku
Subscribers: hiraditya, bollu, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77855
Summary:
While it is uncommon that the ExternalCallingNode needs to be updated,
it can happen. It is uncommon because most functions listed as callees
have external linkage, modifying them is usually not allowed. That said,
there are also internal functions that have, or better had, their
"address taken" at construction time. We conservatively assume various
uses cause the address "to be taken". Furthermore, the user might have
become dead at some point. As a consequence, transformations, e.g., the
Attributor, might be able to replace a function that is listed
as callee of the ExternalCallingNode.
Since there is no function corresponding to the ExternalCallingNode, we
did just remove the node from the callee list if we replaced it (so
far). Now it would be preferable to replace it if needed and remove it
otherwise. However, removing the node has implications on the CGSCC
iteration. Locally, that caused some other nodes to be never visited
but it is for sure possible other (bad) side effects can occur. As it
seems conservatively safe to keep the new node in the callee list we
will do that for now.
Reviewers: lebedev.ri, hfinkel, fhahn, probinson, wristow, loladiro, sstefan1, uenoku
Subscribers: hiraditya, bollu, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77854
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
ModuleSummaryAnalysis is the only file in libAnalysis that brings a
dependency on the CodeGen layer from libAnalysis, moving it breaks this
dependency.
Differential Revision: https://reviews.llvm.org/D77994
Summary:
Share logic to strip debugify metadata between the IR and MIR level
debugify passes. This makes it simpler to hunt for bugs by diffing IR
with vs. without -debugify-each turned on.
As a drive-by, fix an issue causing CallGraphNodes to become invalid
when a dead llvm.dbg.value prototype is deleted.
Reviewers: dsanders, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77915
Remove SmallPtrSet include, replace with forward declaration and include SmallPtrSet.h in CodeMetrics.cpp directly.
Remove unused llvm::DataLayout/Instruction forward declarations.
Summary: change assumption cache to store an assume along with an index to the operand bundle containing the knowledge.
Reviewers: jdoerfert, hfinkel
Reviewed By: jdoerfert
Subscribers: hiraditya, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77402
This is similar to the recent move/addition of "scaleShuffleMask" (D76508),
but there are a couple of differences:
1. The existing x86 helper (canWidenShuffleElements) always tries to
divide-by-2, so it gets called iteratively and wouldn't handle the
general case of non-pow-2 length.
2. The existing x86 code handles "SM_SentinelZero" - we don't have
that in IR, but this code should be safe to use with that or other
special (negative) values.
The motivation is to enable shuffle folds in instcombine/vector-combine
that are similar to D76844 and D76727, but in the reverse-bitcast direction.
Those patterns are visible in the tests for D40633.
Differential Revision: https://reviews.llvm.org/D77881
As proposed in D77881, we'll have the related widening operation,
so this name becomes too vague.
While here, change the function signature to take an 'int' rather
than 'size_t' for the scaling factor, add an assert for overflow of
32-bits, and improve the documentation comments.
This reverts commit 60c642e74b.
This patch is making the TLI "closed" for a predefined set of VecLib
while at the moment it is extensible for anyone to customize when using
LLVM as a library.
Reverting while we figure out a way to re-land it without losing the
generality of the current API.
Differential Revision: https://reviews.llvm.org/D77925
Summary:
Don't attempt to analyze the decomposed GEP for scalable type.
GEP index scale is not compile-time constant for scalable type.
Be conservative, return MayAlias.
Explicitly call TypeSize::getFixedSize() to assert on places where
scalable type doesn't make sense.
Add unit tests to check functionality of -basicaa for scalable type.
This patch is needed for D76944.
Reviewers: sdesmalen, efriedma, spatel, bjope, ctetreau
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77828
Summary:
Encode `-fveclib` setting as per-function attribute so it can threaded through to LTO backends. Accordingly per-function TLI now reads
the attributes and select available vector function list based on that. Now we also populate function list for all supported vector
libraries for the shared per-module `TargetLibraryInfoImpl`, so each function can select its available vector list independently but without
duplicating the vector function lists. Inlining between incompatbile vectlib attributed is also prohibited now.
Subscribers: hiraditya, dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77632
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: sunfish, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77273
Ensured initialized fields; encapsulad delta calulations and evaluation
of threshold having had changed; assertion for CostThresholdMap
dereference, to indicate design intent.
Differential Revision: https://reviews.llvm.org/D77762
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
Use the simpler BitWidth constructor instead of the copy constructor to
make it clear when we don't actually need to copy an existing KnownBits
value. Split out from D74539. NFC.
Now compiler defines 5 sets of constants to represent rounding mode.
These are:
1. `llvm::APFloatBase::roundingMode`. It specifies all 5 rounding modes
defined by IEEE-754 and is used in `APFloat` implementation.
2. `clang::LangOptions::FPRoundingModeKind`. It specifies 4 of 5 IEEE-754
rounding modes and a special value for dynamic rounding mode. It is used
in clang frontend.
3. `llvm::fp::RoundingMode`. Defines the same values as
`clang::LangOptions::FPRoundingModeKind` but in different order. It is
used to specify rounding mode in in IR and functions that operate IR.
4. Rounding mode representation used by `FLT_ROUNDS` (C11, 5.2.4.2.2p7).
Besides constants for rounding mode it also uses a special value to
indicate error. It is convenient to use in intrinsic functions, as it
represents platform-independent representation for rounding mode. In this
role it is used in some pending patches.
5. Values like `FE_DOWNWARD` and other, which specify rounding mode in
library calls `fesetround` and `fegetround`. Often they represent bits
of some control register, so they are target-dependent. The same names
(not values) and a special name `FE_DYNAMIC` are used in
`#pragma STDC FENV_ROUND`.
The first 4 sets of constants are target independent and could have the
same numerical representation. It would simplify conversion between the
representations. Also now `clang::LangOptions::FPRoundingModeKind` and
`llvm::fp::RoundingMode` do not contain the value for IEEE-754 rounding
direction `roundTiesToAway`, although it is supported natively on
some targets.
This change defines all the rounding mode type via one `llvm::RoundingMode`,
which also contains rounding mode for IEEE rounding direction `roundTiesToAway`.
Differential Revision: https://reviews.llvm.org/D77379
This patch introduces the heat coloring of the Control Flow Graph which is based
on the relative "hotness" of each BB. The patch is a part of sequence of three
patches, related to graphs Heat Coloring.
Reviewers: rcorcs, apilipenko, davidxl, sfertile, fedor.sergeev, eraman, bollu
Differential Revision: https://reviews.llvm.org/D77161
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
The patch introduces the system to distinctively store the information
needed for the Control Flow Graph as well as the instrumentary needed for
the follow-up changes: BlockFrequencyInfo and BranchProbabilityInfo.
The patch is a part of sequence of three patches, related to graphs Heat Coloring.
Reviewers: rcorcs, apilipenko, davidxl, sfertile, fedor.sergeev, eraman, bollu
Differential Revision: https://reviews.llvm.org/D76820
The cmyk test is based on the known regression that resulted from:
rGf2fbdf76d8d0
This improves on the equivalent signed min/max change:
rG867f0c3c4d8c
The underlying icmp equivalence is:
~X pred ~Y --> Y pred X
For an icmp with constant, canonicalization results in a swapped pred:
~X < C --> X > ~C
The cmyk tests are based on the known regression that resulted from:
rGf2fbdf76d8d0
So this improvement in analysis might be enough to restore that commit.
D51664 added Instruction::comesBefore which should provide better
performance than the manual check.
Reviewers: rnk, nikic, spatel
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D76228
Forward declare DemandedBits in IVDescriptors, and move include
into the cpp file. Also drop the include from LoopUtils, which
does not need it at all.
Summary:
This patch includes two extensions:
1. It extends the GraphDiff to also keep the original list of updates
after legalization, not just the deletes/insert vectors.
It also provides an API to pop the first update (the updates are store
in reverse, such that the first update is at the end of the list)
2. It adds a bool to mark whether the given updates should be applied as
given, or applied in reverse. This moves the task of reversing the
updates (when the caller needs this) to a functionality inside
GraphDiff, versus having the caller do this.
The two changes could be split into two patches, but they seemed
reasonably small to be reviewed together.
Reviewers: kuhar, dblaikie
Subscribers: hiraditya, george.burgess.iv, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77167
Summary:
Splitting Knowledge retention into Queries in Analysis and Builder into Transform/Utils
allows Queries and Transform/Utils to use Analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77171
This patch adds
- New arguments to getMinPrefetchStride() to let the target decide on a
per-loop basis if software prefetching should be done even with a stride
within the limit of the hw prefetcher.
- New TTI hook enableWritePrefetching() to let a target do write prefetching
by default (defaults to false).
- In LoopDataPrefetch:
- A search through the whole loop to gather information before emitting any
prefetches. This way the target can get information via new arguments to
getMinPrefetchStride() and emit prefetches more selectively. Collected
information includes: Does the loop have a call, how many memory
accesses, how many of them are strided, how many prefetches will cover
them. This is NFC to before as long as the target does not change its
definition of getMinPrefetchStride().
- If a previous access to the same exact address was 'read', and the
current one is 'write', make it a 'write' prefetch.
- If two accesses that are covered by the same prefetch do not dominate
each other, put the prefetch in a block that dominates both of them.
- If a ConstantMaxTripCount is less than ItersAhead, then skip the loop.
- A SystemZ implementation of getMinPrefetchStride().
Review: Ulrich Weigand, Michael Kruse
Differential Revision: https://reviews.llvm.org/D70228
getCallCost is only used within the different layers of TTI, with no
backend implementing it so fold the base implementation into
getUserCost. I think this is an NFC.
Differential Revision: https://reviews.llvm.org/D77050
Summary: These were templated due to SelectionDAG using int masks for shuffles and IR using unsigned masks for shuffles. But now that D72467 has landed we have an int mask version of IRBuilder::CreateShuffleVector. So just use int instead of a template
Reviewers: spatel, efriedma, RKSimon
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77183
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
This patch updates ValueLattice to distinguish between ranges that are
guaranteed to not include undef and ranges that may include undef.
A constant range guaranteed to not contain undef can be used to simplify
instructions to arbitrary values. A constant range that may contain
undef can only be used to simplify to a constant. If the value can be
undef, it might take a value outside the range. For example, consider
the snipped below
define i32 @f(i32 %a, i1 %c) {
br i1 %c, label %true, label %false
true:
%a.255 = and i32 %a, 255
br label %exit
false:
br label %exit
exit:
%p = phi i32 [ %a.255, %true ], [ undef, %false ]
%f.1 = icmp eq i32 %p, 300
call void @use(i1 %f.1)
%res = and i32 %p, 255
ret i32 %res
}
In the exit block, %p would be a constant range [0, 256) including undef as
%p could be undef. We can use the range information to replace %f.1 with
false because we remove the compare, effectively forcing the use of the
constant to be != 300. We cannot replace %res with %p however, because
if %a would be undef %cond may be true but the second use might not be
< 256.
Currently LazyValueInfo uses the new behavior just when simplifying AND
instructions and does not distinguish between constant ranges with and
without undef otherwise. I think we should address the remaining issues
in LVI incrementally.
Reviewers: efriedma, reames, aqjune, jdoerfert, sstefan1
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D76931
For the PHI node
%1 = phi [%A, %entry], [%X, %latch]
it is incorrect to use SCEV of backedge val %X as an exit value
of PHI unless %X is loop invariant.
This is because exit value of %1 is value of %X at one-before-last
iteration of the loop.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D73181
Optimize the common case of splat vector constant. For large vector
going through all elements is expensive. For splatr/broadcast cases we
can skip going through all elements.
Differential Revision: https://reviews.llvm.org/D76664
In past, isGuaranteedToTransferExecutionToSuccessor contained some weird logic
for volatile loads/stores that was ultimately removed by patch D65375. It's time to
remove a piece of dependent logic that used to be a workaround for the code which
is now deleted.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D76918
Aligned_alloc is a standard lib function and has been in glibc since
2.16 and in the C11 standard. It has semantics similar to malloc/calloc
for several analyses/transforms. This patch introduces aligned_alloc
in target library info and memory builtins. Subsequent ones will
make other passes aware and fix https://bugs.llvm.org/show_bug.cgi?id=44062
This change will also be useful to LLVM generators that need to allocate
buffers of vector elements larger than 16 bytes (for eg. 256-bit ones),
element boundary alignment for which is not typically provided by glibc malloc.
Signed-off-by: Uday Bondhugula <uday@polymagelabs.com>
Differential Revision: https://reviews.llvm.org/D76970
This change implements constant folding to constrained versions of
intrinsics, implementing rounding: floor, ceil, trunc, round, rint and
nearbyint.
Differential Revision: https://reviews.llvm.org/D72930
Summary:
The method is used where TypeSize is implicitly cast to integer for
being checked against 0.
Reviewers: sdesmalen, efriedma
Reviewed By: sdesmalen, efriedma
Subscribers: efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76748
Summary:
Rename `succ_const_iterator` to `const_succ_iterator` and
`succ_const_range` to `const_succ_range` for consistency with the
predecessor iterators, and the corresponding iterators in
MachineBasicBlock.
Reviewers: nicholas, dblaikie, nlewycky
Subscribers: hiraditya, bmahjour, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75952
Summary:
Avoid blind cast from Operator to ExtractElementInst in
computeKnownBitsFromOperator. This resulted in some crashes
in downstream fuzzy testing. Instead we use getOperand directly
on the Operator when accessing the vector/index operands.
Haven't seen any problems with InsertElement and ShuffleVector,
but I believe those could be used in constant expressions as well.
So the same kind of fix as for ExtractElement was also applied for
InsertElement.
When it comes to ShuffleVector we now simply bail out if a dynamic
cast of the Operator to ShuffleVectorInst fails. I've got no
reproducer indicating problems for ShuffleVector, and a fix would be
slightly more complicated as getShuffleDemandedElts is involved.
Reviewers: RKSimon, nikic, spatel, efriedma
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76564
If one operand is unknown (and we don't have nowrap), don't compute
the second operand.
Also don't create an unnecessary extra KnownBits variable, it's
okay to reuse KnownOut.
This reduces instructions on libclamav_md5.c by 40%.
Summary:
DataLayout::getTypeStoreSize() returns TypeSize.
For cases where it can not be scalable vector (e.g., GlobalVariable),
explicitly call TypeSize::getFixedSize().
For cases where scalable property doesn't matter, (e.g., check for
zero-sized type), use TypeSize::isNonZero().
Reviewers: sdesmalen, efriedma, apazos, reames
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76454
Summary:
Return None if GEP index type is scalable vector. Size of scalable vectors
are multiplied by a runtime constant.
Avoid transforming:
%a = bitcast i8* %p to <vscale x 16 x i8>*
%tmp0 = getelementptr <vscale x 16 x i8>, <vscale x 16 x i8>* %a, i64 0
store <vscale x 16 x i8> zeroinitializer, <vscale x 16 x i8>* %tmp0
%tmp1 = getelementptr <vscale x 16 x i8>, <vscale x 16 x i8>* %a, i64 1
store <vscale x 16 x i8> zeroinitializer, <vscale x 16 x i8>* %tmp1
into:
%a = bitcast i8* %p to <vscale x 16 x i8>*
%tmp0 = getelementptr <vscale x 16 x i8>, <vscale x 16 x i8>* %a, i64 0
%1 = bitcast <vscale x 16 x i8>* %tmp0 to i8*
call void @llvm.memset.p0i8.i64(i8* align 16 %1, i8 0, i64 32, i1 false)
Reviewers: sdesmalen, efriedma, apazos, reames
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, arphaman, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76464
The sll/srl/sra scalar vector shifts can be replaced with generic shifts if the shift amount is known to be in range.
This also required public DemandedElts variants of llvm::computeKnownBits to be exposed (PR36319).
This is fixing up various places that use the implicit
TypeSize->uint64_t conversion.
The new overloads in MemoryLocation.h are already used in various places
that construct a MemoryLocation from a TypeSize, including MemorySSA.
(They were using the implicit conversion before.)
Differential Revision: https://reviews.llvm.org/D76249
Summary:
As noted in [[ https://bugs.llvm.org/show_bug.cgi?id=45201 | PR45201 ]],
[[ https://bugs.llvm.org/show_bug.cgi?id=10090 | PR10090 ]] SCEV doesn't
always avoid recursive algorithms, and that causes issues with
large expression depths and/or smaller stack sizes.
In `SCEVExpander::isHighCostExpansion*()` case, the refactoring to avoid
recursion is rather idiomatic. We simply need to place the root expr
into a vector, and iterate over vector elements accounting for the cost
of each one, adding new exprs at the end of the vector,
thus achieving recursion-less traversal.
The order in which we will visit exprs doesn't matter here,
so we will be fine with the most basic approach of using SmallVector
and inserting/extracting from the back, which accidentally is the same
depth-first traversal that we were doing previously recursively.
Reviewers: mkazantsev, reames, wmi, ekatz
Reviewed By: mkazantsev
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76273
Summary:
DataLayout::getTypeAllocSize() return TypeSize. For cases where the
scalable property doesn't matter, we should explicitly call getKnownMinSize()
to avoid implicit type conversion to uint64_t, which is not valid for scalable
vector type.
Reviewers: sdesmalen, efriedma, apazos, reames
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76260
Summary:
Run StackSafetyAnalysis at the end of the IR pipeline and annotate
proven safe allocas with !stack-safe metadata. Do not instrument such
allocas in the AArch64StackTagging pass.
Reviewers: pcc, vitalybuka, ostannard
Reviewed By: vitalybuka
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, gilang, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73513
Summary:
Skip folds that rely on DataLayout::getTypeAllocSize(). For scalable
vector, only minimal type alloc size is known at compile-time.
Reviewers: sdesmalen, efriedma, spatel, apazos
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75892
This patch adds a new singlecrfromundef lattice value, indicating a
single element constant range which was merge with undef at some point.
Merging it with another constant range results in overdefined, as we
won't be able to replace all users with a single value.
This patch uses a ConstantRange instead of a Constant*, because regular
integer constants are represented as single element constant ranges as
well and this allows the existing code working without additional
changes.
Reviewers: efriedma, nikic, reames, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D75845
This patch adds a new undef lattice state, which is used to represent
UndefValue constants or instructions producing undef.
The main difference to the unknown state is that merging undef values
with constants (or single element constant ranges) produces the
constant/constant range, assuming all uses of the merge result will be
replaced by the found constant.
Contrary, merging non-single element ranges with undef needs to go to
overdefined. Using unknown for UndefValues currently causes mis-compiles
in CVP/LVI (PR44949) and will become problematic once we use
ValueLatticeElement for SCCP.
Reviewers: efriedma, reames, davide, nikic
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D75120
Because we have to use a ConstantExpr at some point, the canonical form
isn't set in stone, but this seems reasonable.
The pretty sizeof(<vscale x 4 x i32>) dumping is a relic of ancient
LLVM; I didn't have to touch that code. :)
Differential Revision: https://reviews.llvm.org/D75887
This patch add mayContainUnboundedCycle helper function which checks whether a function has any cycle which we don't know if it is bounded or not.
Loops with maximum trip count are considered bounded, any other cycle not.
It also contains some fixed tests and some added tests contain bounded and
unbounded loops and non-loop cycles.
Reviewed By: jdoerfert, uenoku, baziotis
Differential Revision: https://reviews.llvm.org/D74691
Calculating SCEVs can be cumbersome, and may take very long time (even
hours, for very long expressions). To prevent recalculating expressions
over and over again, we cache them.
This change add cache queries to key positions, to prevent recalculation
of the expressions.
Fix PR43571.
Differential Revision: https://reviews.llvm.org/D70097
Summary:
Support ConstantInt::get() and Constant::getAllOnesValue() for scalable
vector type, this requires ConstantVector::getSplat() to take in 'ElementCount',
instead of 'unsigned' number of element count.
This change is needed for D73753.
Reviewers: sdesmalen, efriedma, apazos, spatel, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74386
This is part of the IR sibling for:
D75576
(I'm splitting part of the transform as a separate commit
to reduce risk. I don't know of any bugs that might be
exposed by this improved folding, but it's hard to see
those in advance...)
Summary:
Cost modelling strikes again.
In PR44668 <https://bugs.llvm.org/show_bug.cgi?id=44668> patch series,
i've made the same mistake of always using generic `getOperationCost()`
that i missed in reviewing D73480/D74495 which was later fixed
in 62dd44d76d.
We should be using more specific hooks instead - `getCastInstrCost()`,
`getArithmeticInstrCost()`, `getCmpSelInstrCost()`.
Evidently, this does not have an effect on the existing testcases,
with unchanged default cost budget. But if it *does* have an effect
on some target, we'll have to segregate tests that use this function
per-target, much like we already do with other TTI-aware transform tests.
There's also an issue that @samparker has brought up in post-commit-review:
>>! In D73501#1905171, @samparker wrote:
> Hi,
> Did you get performance numbers for these patches? We track the performance
> of our (Arm) open source DSP library and the cost model fixes were generally
> a notable improvement, so many thanks for that! But the final patch
> for rewriting exit values has generally been bad, especially considering
> the gains from the modelling improvements. I need to look into it further,
> but on my current test case I'm seeing +30% increase in stack accesses
> with a similar decrease in performance.
> I'm just wondering if you observed any negative effects yourself?
I don't know if this addresses that, or we need D66450 for that.
Reviewers: samparker, spatel, mkazantsev, reames, wmi
Reviewed By: reames
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits, samparker
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75908
Summary:
For scalable vector, index out-of-bound can not be determined at compile-time.
The same apply for VectorUtil findScalarElement().
Add test cases to check the functionality of SimplifyInsert/ExtractElementInst for scalable vector.
Reviewers: sdesmalen, efriedma, spatel, apazos
Reviewed By: efriedma
Subscribers: cameron.mcinally, tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75782
Refines the gather/scatter cost model, but also changes the TTI
function getIntrinsicInstrCost to accept an additional parameter
which is needed for the gather/scatter cost evaluation.
This did require trivial changes in some non-ARM backends to
adopt the new parameter.
Extending gathers and truncating scatters are now priced cheaper.
Differential Revision: https://reviews.llvm.org/D75525
If a call argument has the "returned" attribute, we can simplify
the call to the value of that argument. The "-inst-simplify" pass
already handled this for the constant integer argument case via
known bits, which is invoked in SimplifyInstruction. However,
non-constant (or non-int) arguments are not handled at all right now.
This addresses one of the regressions from D75801.
Differential Revision: https://reviews.llvm.org/D75815
As pointed out by jdoerfert on D75815, we must be careful when
simplifying musttail calls: We can only replace the return value
if we can eliminate the call entirely. As we can't make this
guarantee for all consumers of InstSimplify, this patch disables
simplification of musttail calls. Without this patch, musttail
simplification currently results in module verification errors.
Differential Revision: https://reviews.llvm.org/D75824
With the addition of the LLD time tracing it made sense to include coverage
for LLVM's various passes. Doing so ensures that ThinLTO is also covered
with a time trace.
Before:
{F11333974}
After:
{F11333928}
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D74516
Summary:
```
br i1 c, BB1, BB2:
BB1:
use1(c)
BB2:
use2(c)
```
In BB1 and BB2, c is never undef or poison because otherwise the branch would have triggered UB.
This is a resubmission of 952ad47 with crash fix of llvm/test/Transforms/LoopRotate/freeze-crash.ll.
Checked with Alive2
Reviewers: xbolva00, spatel, lebedev.ri, reames, jdoerfert, nlopes, sanjoy
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75401
InstSimplify can fold icmps of gep where the base pointers are the
same and the offsets are constant. It does so by constructing a
constant expression icmp and assumes that it gets folded -- but
this doesn't actually happen, because GEP expressions can usually
only be folded by the target-dependent constant folding layer.
As such, we need to explicitly invoke it here.
Differential Revision: https://reviews.llvm.org/D75407
Spin-off from D75407. As described there, ConstantFoldConstant()
currently returns null for non-ConstantExpr/ConstantVector inputs,
but otherwise always returns non-null, independently of whether
any folding has happened or not.
This is confusing and makes consumer code more complicated.
I would expect either that ConstantFoldConstant() returns only if
it actually folded something, or that it always returns non-null.
I'm going to the latter possibility here, which appears to be more
useful considering existing usage.
Differential Revision: https://reviews.llvm.org/D75543
Summary:
This is second attempt to fix the problem with incorrect dependencies reported in presence of invariant load. Initial fix (https://reviews.llvm.org/D64405) was reverted due to a regression reported in https://reviews.llvm.org/D70516.
The original fix changed caching behavior for invariant loads. Namely such loads are not put into the second level cache (NonLocalDepInfo). The problem with that fix is the first level cache (CachedNonLocalPointerInfo) still works as if invariant loads were in the second level cache. The solution is in addition to not putting dependence results into the second level cache avoid putting info about invariant loads into the first level cache as well.
Reviewers: jdoerfert, reames, hfinkel, efriedma
Reviewed By: jdoerfert
Subscribers: DaniilSuchkov, hiraditya, bmahjour, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73027
Summary:
```
br i1 c, BB1, BB2:
BB1:
use1(c)
BB2:
use2(c)
```
In BB1 and BB2, c is never undef or poison because otherwise the branch would have triggered UB.
Checked with Alive2
Reviewers: xbolva00, spatel, lebedev.ri, reames, jdoerfert, nlopes, sanjoy
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75401
Summary: This patch adds an analysis pass to collect loop nests and
summarize properties of the nest (e.g the nest depth, whether the nest
is perfect, what's the innermost loop, etc...).
The motivation for this patch was discussed at the latest meeting of the
LLVM loop group (https://ibm.box.com/v/llvm-loop-nest-analysis) where we
discussed
the unimodular loop transformation framework ( “A Loop Transformation
Theory and an Algorithm to Maximize Parallelism”, Michael E. Wolf and
Monica S. Lam, IEEE TPDS, October 1991). The unimodular framework
provides a convenient way to unify legality checking and code generation
for several loop nest transformations (e.g. loop reversal, loop
interchange, loop skewing) and their compositions. Given that the
unimodular framework is applicable to perfect loop nests this is one
property of interest we expose in this analysis. Several other utility
functions are also provided. In the future other properties of interest
can be added in a centralized place.
Authored By: etiotto
Reviewer: Meinersbur, bmahjour, kbarton, Whitney, dmgreen, fhahn,
reames, hfinkel, jdoerfert, ppc-slack
Reviewed By: Meinersbur
Subscribers: bryanpkc, ppc-slack, mgorny, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D68789
Summary: This patch adds an analysis pass to collect loop nests and
summarize properties of the nest (e.g the nest depth, whether the nest
is perfect, what's the innermost loop, etc...).
The motivation for this patch was discussed at the latest meeting of the
LLVM loop group (https://ibm.box.com/v/llvm-loop-nest-analysis) where we
discussed
the unimodular loop transformation framework ( “A Loop Transformation
Theory and an Algorithm to Maximize Parallelism”, Michael E. Wolf and
Monica S. Lam, IEEE TPDS, October 1991). The unimodular framework
provides a convenient way to unify legality checking and code generation
for several loop nest transformations (e.g. loop reversal, loop
interchange, loop skewing) and their compositions. Given that the
unimodular framework is applicable to perfect loop nests this is one
property of interest we expose in this analysis. Several other utility
functions are also provided. In the future other properties of interest
can be added in a centralized place.
Authored By: etiotto
Reviewer: Meinersbur, bmahjour, kbarton, Whitney, dmgreen, fhahn,
reames, hfinkel, jdoerfert, ppc-slack
Reviewed By: Meinersbur
Subscribers: bryanpkc, ppc-slack, mgorny, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D68789
Summary:
This patch helps getGuaranteedNonFullPoisonOp handle llvm.assume call.
Also, a comment about the semantics of branch is removed to prevent confusion.
As llvm.assume does, branching on poison directly raises UB (as LangRef says), and this allows transformations such as introduction of llvm.assume on branch condition at each successor, or freely replacing values after conditional branch (such as at loop exit).
Handling br is not addressed in this patch. It makes SCEV more accurate, causing existing LoopVectorize/IndVar/etc tests to fail.
Reviewers: spatel, lebedev.ri, nlopes
Reviewed By: nlopes
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75397
Summary:
This patch helps isGuaranteedNotToBeUndefOrPoison return true if the value
makes the program always undefined.
According to value tracking functions' comments, it is not still in consensus
whether a poison value can be bitwise or not, so conservatively only the case with
i1 is considered.
Reviewers: spatel, lebedev.ri, reames, nlopes, regehr
Reviewed By: nlopes
Subscribers: uenoku, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75396
Summary:
Final patch in series to fix inlining between functions with different
nobuiltin attributes/options, which was specifically an issue in LTO.
See discussion on D61634 for background.
The prior patch in this series (D67923) enabled per-Function TLI
construction that identified the nobuiltin attributes.
Here I have allowed inlining to proceed if the callee's nobuiltins are a
subset of the caller's nobuiltins, but not in the reverse case, which
should be conservatively correct. This is controlled by a new option,
-inline-caller-superset-nobuiltin, which is enabled by default.
Reviewers: hfinkel, gchatelet, chandlerc, davidxl
Subscribers: arsenm, jvesely, nhaehnle, mehdi_amini, eraman, hiraditya, haicheng, dexonsmith, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74162
According to Joseph Myers, a libm maintainer
> They were only ever an ABI (selected by use of -ffinite-math-only or
> options implying it, which resulted in the headers using "asm" to redirect
> calls to some libm functions), not an API. The change means that ABI has
> turned into compat symbols (only available for existing binaries, not for
> anything newly linked, not included in static libm at all, not included in
> shared libm for future glibc ports such as RV32), so, yes, in any case
> where tools generate direct calls to those functions (rather than just
> following the "asm" annotations on function declarations in the headers),
> they need to stop doing so.
As a consequence, we should no longer assume these symbols are available on the
target system.
Still keep the TargetLibraryInfo for constant folding.
Differential Revision: https://reviews.llvm.org/D74712
Summary:
Currently the dependence analysis in LLVM is unable to compute accurate
dependence vectors for multi-dimensional fixed size arrays.
This is mainly because the delinearization algorithm in scalar evolution
relies on parametric terms to be present in the access functions. In the
case of fixed size arrays such parametric terms are not present, but we
can use the indexes from GEP instructions to recover the subscripts for
each dimension of the arrays. This patch adds this ability under the
existing option `-da-disable-delinearization-checks`.
Authored By: bmahjour
Reviewer: Meinersbur, sebpop, fhahn, dmgreen, grosser, etiotto, bollu
Reviewed By: Meinersbur
Subscribers: hiraditya, arphaman, Whitney, ppc-slack, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72178
Add extra diagnostics for the inline cost analysis under
-print-instruction-deltas cl option. When enabled along with
-debug-only=inline-cost it prints the IR of inline candidate
annotated with cost and threshold change per every instruction.
Reviewed By: apilipenko, davidxl, mtrofin
Differential Revision: https://reviews.llvm.org/D71501
Summary:
Previosly we simply always said that `SCEVMinMaxExpr` is too costly to expand.
But this isn't really true, it expands into just a comparison+swap pair.
And again much like with add/mul, there will be one less such pair
than the number of operands. And we need to count the cost of operands themselves.
This does change a number of testcases, and as far as i can tell,
all of these changes are improvements, in the sense that
we fixed up more latches to do the [in]equality comparison.
This concludes cost-modelling changes, no other SCEV expressions exist as of now.
This is a part of addressing [[ https://bugs.llvm.org/show_bug.cgi?id=44668 | PR44668 ]].
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73744
Summary:
So, i wouldn't call this *obviously* correct,
but i think i got it right this time :)
Roughly, we have
```
Op0*x^0 + Op1*x^1 + Op2*x^2 ...
```
where `Op_{n} * x^{n}` is called term, and `n` the degree of term.
Due to the way they are stored internally in `SCEVAddRecExpr`,
i believe we can have `Op_{n}` to be `0`, so we should not charge for those.
I think it is most straight-forward to count the cost in 4 steps:
1. First, count it the same way we counted `scAddExpr`, but be sure to skip terms with zero constants.
Much like with `add` expr we will have one less addition than number of terms.
2. Each non-constant term (term degree >= 1) requires a multiplication between the `Op_{n}` and `x^{n}`.
But again, only charge for it if it is required - `Op_{n}` must not be 0 (no term) or 1 (no multiplication needed),
and obviously don't charge constant terms (`x^0 == 1`).
3. We must charge for all the `x^0`..`x^{poly_degree}` themselves.
Since `x^{poly_degree}` is `x * x * ... * x`, i.e. `poly_degree` `x`'es multiplied,
for final `poly_degree` term we again require `poly_degree-1` multiplications.
Note that all the `x^{0}`..`x^{poly_degree-1}` will be computed for the free along the way there.
4. And finally, the operands themselves.
Here, much like with add/mul exprs, we really don't look for preexisting instructions..
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73741
Summary:
While this resolves the regression from D73722 in `llvm/test/Transforms/IndVarSimplify/exit_value_test2.ll`,
this now regresses `llvm/test/Transforms/IndVarSimplify/elim-extend.ll` `@nestedIV` test,
we no longer can perform that expansion within default budget of `4`, but require budget of `6`.
That regression is being addressed by D73777.
The basic idea here is simple.
```
Op0, Op1, Op2 ...
| | |
\--+--/ |
| |
\---+---/
```
I.e. given N operands, we will have N-1 operations,
so we have to add cost of an add (mul) for **every** Op processed,
**except** the first one, plus we need to recurse into *every* Op.
I'm guessing there's already canonicalization that ensures we won't
have `1` operand in `scMulExpr`, and no `0` in `scAddExpr`/`scMulExpr`.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73728
Summary:
If we don't believe this UDiv is actually a LShr in disguise, things are much worse.
First, we try to see if this UDiv actually originates from user code,
by looking for `S + 1`, and if found considering this UDiv to be free.
But otherwise, we always considered this UDiv to be high-cost.
However that is no longer the case with TTI-driven cost model:
our default budget is 4, which matches the default cost of UDiv,
so now we allow a single UDiv to not be counted as high-cost.
While that is the case, it is evident this is actually a regression
due to the fact that cost-modelling is incomplete - we did not account
for the `add`, `mul` costs yet. That is being addressed in D73728.
Cost-modelling for UDiv also seems pretty straight-forward:
subtract cost of the UDiv itself, and recurse into both the LHS and RHS.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73722
Summary:
Like with casts, we need to subtract the cost of `lshr` instruction
from budget, and recurse into LHS operand.
Seems "pretty obviously correct" to me?
To be noted, there is a number of other shortcuts we //could// cost-model:
* `... + (-1 * ...)` -> `... - ...` <- likely very frequent case
* `x - (rem x, power-of-2)`, which is currently `(x udiv power-of-2) * power-of-2` -> `x & -log2(power-of-2)`
* `rem x, power-of-2`, which is currently `x - ((x udiv power-of-2) * power-of-2)` -> `x & log2(power-of-2)-1`
* `... * power-of-2` -> `... << log2(power-of-2)` <- likely not very beneficial
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73718
Summary:
This is not a NFC, although it does not change any of the existing tests.
I'm not really sure if we should have specific tests for the cost modelling itself.
This is the first patch that actually makes `SCEVExpander::isHighCostExpansionHelper()`
account for the cost of the SCEV expression, and consider the budget available,
by modelling cast expressions.
I believe the logic itself is "pretty obviously correct" - from budget,
we need to subtract the cost of the cast expression from inner type `Op->getType()`
to the `S->getType()` type, and recurse into the expression we are casting.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: xbolva00, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73716
Summary:
Currently, as per `check-llvm`, we never call `SCEVExpander::isHighCostExpansion()` with null TTI,
so this appears to be a safe restriction.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: javed.absar, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73712
Summary:
As far as i can tell this is still NFC.
Initially in rL146438 it was added at the top of the function,
later rL238507 dethroned it, and rL244474 did it again.
I'm not sure if we have already checked the cost of this expansion, we should be doing that again.
Reviewers: reames, mkazantsev, wmi, sanjoy, atrick, igor-laevsky
Reviewed By: mkazantsev
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73706
Summary:
In future patches`SCEVExpander::isHighCostExpansionHelper()` will respect the budget allocated by performing TTI cost modelling.
This is a fully NFC patch to make things reviewable.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, zzheng, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73705
Summary:
Future patches will make use of TTI to perform cost-model-driven `SCEVExpander::isHighCostExpansionHelper()`
This is a fully NFC patch to make things reviewable.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, zzheng, javed.absar, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73704
Summary:
This patch moves the getIndexExpressionsFromGEP function from polly
into ScalarEvolution so that both polly and DependenceAnalysis can
use it for the purpose of subscript delinearization when the array
sizes are not parametric.
Authored By: bmahjour
Reviewer: Meinersbur, sebpop, fhahn, dmgreen, grosser, etiotto, bollu
Reviewed By: Meinersbur
Subscribers: hiraditya, arphaman, Whitney, ppc-slack, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73995
Added two flags to omit uncommon or dead paths in the CFG graphs:
-cfg-hide-unreachable-paths
-cfg-hide-deoptimize-paths
The main purpose is performance analysis when such block are not
"interesting" from perspective of common path performance.
Reviewed By: apilipenko, davidxl
Differential Revision: https://reviews.llvm.org/D74346
Summary:
There is a flaw in memory dependence analysis caching mechanism when memory accesses with TBAA are involved. Assume we first analysed and cached results for access with TBAA. Later we request dependence for the same memory but without TBAA (or different TBAA). By design these two queries should share one entry in the internal cache which corresponds to a general access (without TBAA). Thus upon second request internal cached is cleared and we continue analysis for access as if there is no TBAA.
The problem is that even though internal cache is cleared the set of visited nodes is not. That means we won't traverse visited nodes again and populate internal cache with the corresponding dependence results. So we end up with internal cache in an incomplete state. Current implementation tries to signal that situation by resetting CacheInfo->Pair at line 1104. But that doesn't actually help since later code ignores this invalidation and relies on 'Cache->empty()' property to decide on cache completeness.
Reviewers: reames, hfinkel, chandlerc, fedor.sergeev, asbirlea, fhahn, john.brawn, Prazek, sunfish
Reviewed By: john.brawn
Subscribers: DaniilSuchkov, kosarev, jfb, dantrushin, hiraditya, bmahjour, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73032
Summary:
As mentioned in D71974, it is useful for must-be-executed-context to explore CFG backwardly.
This patch is ported from parts of D64975. We use a dominator tree to find the previous context if
a dominator tree is available.
Reviewers: jdoerfert, hfinkel, baziotis, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74817
Summary:
This is the last functional patch affecting the representation of DDG.
Here we try to simplify the DDG to reduce the number of nodes and edges by
iteratively merging pairs of nodes that satisfy the following conditions,
until no such pair can be identified. A pair of nodes consisting of a and b
can be merged if:
1. the only edge from a is a def-use edge to b and
2. the only edge to b is a def-use edge from a and
3. there is no cyclic edge from b to a and
4. all instructions in a and b belong to the same basic block and
5. both a and b are simple (single or multi instruction) nodes.
These criteria allow us to fold many uninteresting def-use edges that
commonly exist in the graph while avoiding the risk of introducing
dependencies that didn't exist before.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72350
isKnownNonNaN() could not recognize a zero splat because that is a
ConstantAggregateZero which is-a ConstantData but not a ConstantDataVector.
Patch makes a ConstantAggregateZero return true.
Review: Thomas Lively
Differential Revision: https://reviews.llvm.org/D74263
After having committed https://reviews.llvm.org/D72226, 2 buildbots
running GCC 5.4.0 began failing. The cause was the order in which those
compilers evaluated the left- and right-hand sides of the expression
`RC.SCCIndices[C] = RC.SCCIndices.size();`. This commit splits the
expression into multiple statements to avoid ambiguity, and adds a test
case that exercises the code that caused the test failures on those
older compilers (which was originally included in the reviewed patch,
https://reviews.llvm.org/D72226).
Essentially, fold OrderedBasicBlock into BasicBlock, and make it
auto-invalidate the instruction ordering when new instructions are
added. Notably, we don't need to invalidate it when removing
instructions, which is helpful when a pass mostly delete dead
instructions rather than transforming them.
The downside is that Instruction grows from 56 bytes to 64 bytes. The
resulting LLVM code is substantially simpler and automatically handles
invalidation, which makes me think that this is the right speed and size
tradeoff.
The important change is in SymbolTableTraitsImpl.h, where the numbering
is invalidated. Everything else should be straightforward.
We probably want to implement a fancier re-numbering scheme so that
local updates don't invalidate the ordering, but I plan for that to be
future work, maybe for someone else.
Reviewed By: lattner, vsk, fhahn, dexonsmith
Differential Revision: https://reviews.llvm.org/D51664
Relative to the original commit, this fixes some warnings,
and is based on the deletion of the IRBuilder copy constructor
in D74693. The automatic copy constructor would no longer be
safe.
-----
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
Summary:
Depends on https://reviews.llvm.org/D70927.
`LazyCallGraph::addNewFunctionIntoSCC` allows users to insert a new
function node into a call graph, into a specific, existing SCC.
Extend this interface such that functions can be added even when they do
not belong in any existing SCC, but instead in a new SCC within an
existing RefSCC.
The ability to insert new functions as part of a RefSCC is necessary for
outlined functions that do not form a strongly connected cycle with the
function they are outlined from. An example of such a function would be the
coroutine funclets 'f.resume', etc., which are outlined from a coroutine 'f'.
Coroutine 'f' only references the funclets' addresses, it does not call
them directly.
Reviewers: jdoerfert, chandlerc, wenlei, hfinkel
Reviewed By: jdoerfert
Subscribers: hfinkel, JonChesterfield, mehdi_amini, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72226
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
Summary:
This is second attempt to fix the problem with incorrect dependencies reported in presence of invariant load. Initial fix (https://reviews.llvm.org/D64405) was reverted due to a regression reported in https://reviews.llvm.org/D70516.
The original fix changed caching behavior for invariant loads. Namely such loads are not put into the second level cache (NonLocalDepInfo). The problem with that fix is the first level cache (CachedNonLocalPointerInfo) still works as if invariant loads were in the second level cache. The solution is in addition to not putting dependence results into the second level cache avoid putting info about invariant loads into the first level cache as well.
Reviewers: jdoerfert, reames, hfinkel, efriedma
Reviewed By: jdoerfert
Subscribers: DaniilSuchkov, hiraditya, bmahjour, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73027
MemorySSA is often taking up an unreasonable fraction of runtime in
assertion enabled builds. Turns out that there is one code-path that
runs verifyMemorySSA() even if VerifyMemorySSA is not enabled. This
patch makes it conditional as well.
Differential Revision: https://reviews.llvm.org/D74505
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
Summary:
Bail out early for scalable vectors. As global variables are not expected
to be scalable.
Use explicit call of getFixedSize() to assert on places where scalable size
doesn't make sense.
Reviewers: sdesmalen, efriedma, apazos, huntergr, willlovett
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74424
Summary:
Passes ORE, BPI, BFI are not being preserved by Loop passes, hence it
is incorrect to retrieve these passes as cached.
This patch makes the loop passes in question compute a new instance.
In some of these cases, however, it may be beneficial to change the Loop pass to
a Function pass instead, similar to the change for LoopUnrollAndJam.
Reviewers: chandlerc, dmgreen, jdoerfert, reames
Subscribers: mehdi_amini, hiraditya, zzheng, steven_wu, dexonsmith, Whitney, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72891
With the fixed implementation of the "remainder" operation in
rG9d0956ebd471, we can now add support to folding calls to it.
Differential Revision: https://reviews.llvm.org/D69777
Summary:
Part of the changes in D44564 made BasicAA not CFG only due to it using
PhiAnalysisValues which may have values invalidated.
Subsequent patches (rL340613) appear to have addressed this limitation.
BasicAA should not be invalidated by non-CFG-altering passes.
A concrete example is MemCpyOpt which preserves CFG, but we are testing
it invalidates BasicAA.
llvm-dev RFC: https://groups.google.com/forum/#!topic/llvm-dev/eSPXuWnNfzM
Reviewers: john.brawn, sebpop, hfinkel, brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74353
LoopCacheAnalysis currently assumes the loop will be iterated over in
a forward direction. This patch addresses the issue by using the
absolute value of the stride when iterating backwards.
Note: this patch will treat negative and positive array access the
same, resulting in the same cost being calculated for single and
bi-directional access patterns. This should be improved in a
subsequent patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D73064
The CallGraphUpdater is a helper that simplifies the process of updating
the call graph, both old and new style, while running an CGSCC pass.
The uses are contained in different commits, e.g. D70767.
More functionality is added as we need it.
Reviewed By: modocache, hfinkel
Differential Revision: https://reviews.llvm.org/D70927
Bionic has had `__strlen_chk` for a while. Optimizing that into a
constant is quite profitable, when possible.
Differential Revision: https://reviews.llvm.org/D74079
If we know that a >= b (unsigned), usub.with.overflow(a, b) cannot
overflow. Similarly, if b > a, the same expression overflows.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: nikic, Gerolf
Differential Revision: https://reviews.llvm.org/D74066
This patch adds versions of isImpliedCondition and
isImpliedByDomCondition that take a predicate, LHS and RHS operands as
instead of a Value representing the condition.
This allows using those functions to check conditions without having a
concrete ICmp instruction.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D74065
I was debug stepping through an x86 shuffle lowering and
noticed we were doing an N^2 search for splat index. I
didn't find the equivalent functionality anywhere else in
LLVM, so here's a helper that takes an array of int and
returns a splatted index while ignoring undefs (any
negative value).
This might also be used inside existing
ShuffleVectorInst/ShuffleVectorSDNode functions and/or
help with D72467.
Differential Revision: https://reviews.llvm.org/D74064
Summary:
It can be useful to tune the default inline threshold without overriding other inlining thresholds (e.g. in code compiled for size).
The existing `-inline-threshold` flag overrides other thresholds, so it is insufficient in codebases where there is a mix of code compiled for size and speed.
Patch by Michael Holman <michael.holman@microsoft.com>
Reviewers: eraman, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mtrofin, davidxl, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73217
Summary:
Add a debug check for frequency queries for unknown blocks (typically blocks
that are created after BFI is computed but their frequencies are not
communicated to BFI.)
This is useful for detecting and debugging missed BFI updates.
This is debug build only and disabled behind a flag.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73920
ClangBuildAnalyzer results show that a lot of time is spent
instantiating AnalysisManager::getResultImpl across the code base:
**** Templates that took longest to instantiate:
50445 ms: llvm::AnalysisManager<llvm::Function>::getResultImpl (412 times, avg 122 ms)
47797 ms: llvm::AnalysisManager<llvm::Function>::getResult<llvm::TargetLibraryAnalysis> (389 times, avg 122 ms)
46894 ms: std::tie<const unsigned long long, const bool> (2452 times, avg 19 ms)
43851 ms: llvm::BumpPtrAllocatorImpl<llvm::MallocAllocator, 4096, 4096>::Allocate (3228 times, avg 13 ms)
33911 ms: std::tie<const unsigned int, const unsigned int, const unsigned int, const unsigned int> (897 times, avg 37 ms)
33854 ms: std::tie<const unsigned long long, const unsigned long long> (1897 times, avg 17 ms)
27886 ms: std::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string (11156 times, avg 2 ms)
I mentioned this result to @chandlerc, and he suggested this direction.
AnalysisManager is already explicitly instantiated, and getResultImpl
doesn't need to be inlined. Move the definition to an Impl header, and
include that header in files that explicitly instantiate
AnalysisManager. There are only four (real) IR units:
- function
- module
- loop
- cgscc
Looking at a specific transform (ArgumentPromotion.cpp), here are three
compilations before & after this change:
BEFORE:
$ for i in $(seq 3) ; do ./ccit.bat ; done
peak memory: 258.15MB
real: 0m6.297s
peak memory: 257.54MB
real: 0m5.906s
peak memory: 257.47MB
real: 0m6.219s
AFTER:
$ for i in $(seq 3) ; do ./ccit.bat ; done
peak memory: 235.35MB
real: 0m5.454s
peak memory: 234.72MB
real: 0m5.235s
peak memory: 234.39MB
real: 0m5.469s
The 20MB of memory saved seems real, and the time improvement seems like
it is there.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73817
Summary:
* Most of the simplifications in SimplifyShuffleVectorInst depend on the
concrete value of, or the length of the mask vector. For scalable
vectors, this cannot be known at compile time.
** for these tests, detect if the vector is scalable before attempting
the transformation
* The functions ShuffleVectorInst::getMaskValue and
ShuffleVectorInst::getShuffleMask access the value of the constant mask.
However, since the length of the mask is unknown at compile time, these
function do not work for scalable vectors. Add asserts to ensure that
the input mask is not scalable
Reviewers: efriedma, sdesmalen, apazos, chrisj, huihuiz
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73555
With this patch new trivial edges can be added to an SCC in a CGSCC
pass via the updateCGAndAnalysisManagerForCGSCCPass method. It shares
almost all the code with the existing
updateCGAndAnalysisManagerForFunctionPass method but it implements the
first step towards the TODOs.
This was initially part of D70927.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D72025
We want to allow splat value transforms to improve PR44588 and related bugs:
https://bugs.llvm.org/show_bug.cgi?id=44588
...but to do that, we need to know if values are splatted from the same,
specific index (lane) rather than splatted from an arbitrary index.
We can improve the undef handling with 1-liner follow-ups because the
Constant API optionally allow undefs now.
Differential Revision: https://reviews.llvm.org/D73549
This patch adds initial support for a DemandedElts mask to the internal computeKnownBits/ComputeNumSignBits methods, matching the SelectionDAG and GlobalISel equivalents.
So far only a couple of instructions have been setup to handle the DemandedElts, the remainder still using the existing 'all elements' default. The plan is to extend support as we have test coverage.
Differential Revision: https://reviews.llvm.org/D73435
Summary:
This patch makes sure that the field VFShape.VF is greater than zero
when demangling the vector function name of scalable vector functions
encoded in the "vector-function-abi-variant" attribute.
This change is required to be able to provide instances of VFShape
that can be used to query the VFDatabase for the vectorization passes,
as such passes always require a positive value for the Vectorization Factor (VF)
needed by the vectorization process.
It is not possible to extract the value of VFShape.VF from the mangled
name of scalable vector functions, because it is encoded as
`x`. Therefore, the VFABI demangling function has been modified to
extract such information from the IR declaration of the vector
function, under the assumption that _all_ vectors in the signature of
the vector function have the same number of lanes. Such assumption is
valid because it is also assumed by the Vector Function ABI
specifications supported by the demangling function (x86, AArch64, and
LLVM internal one).
The unit tests that demangle scalable names have been modified by
adding the IR module that carries the declaration of the vector
function name being demangled.
In particular, the demangling function fails in the following cases:
1. When the declaration of the scalable vector function is not
present in the module.
2. When the value of VFSHape.VF is not greater than 0.
Reviewers: jdoerfert, sdesmalen, andwar
Reviewed By: jdoerfert
Subscribers: mgorny, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73286
Summary:
It is called when instructions aren't simplified, and the implementation
is expected to account for a penalty. Renamed to
onCommonInstructionMissedSimplification.
Reviewers: davidxl, eraman
Reviewed By: davidxl
Subscribers: hiraditya, baloghadamsoftware, haicheng, a.sidorin, Szelethus, donat.nagy, dkrupp, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73662
Summary:
This will help with devirtualization (store forwarding with vtable pointers in
the presence of other stores into members in the constructor.) During inlining,
we don't have AA.
Reviewers: davidxl
Subscribers: mgorny, Prazek, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71307
Previously, the enums didn't account for all the possible cases, which
could cause misleading results (particularly for a "switch" on
FunctionModRefBehavior).
Fixes regression in polly from recent patch to add writeonly to memset.
While I'm here, also fix a few dubious uses of the FMRB_* enum values.
Differential Revision: https://reviews.llvm.org/D73154
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
This is a follow up on D61634. It adds an LLVM IR intrinsic to allow better implementation of memcpy from C++.
A follow up CL will add the intrinsics in Clang.
Reviewers: courbet, theraven, t.p.northover, jdoerfert, tejohnson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71710
Summary:
Treat scalable allocas as if they have storage size of 0, and
scalable-typed memory accesses as if their range is unlimited.
This is not a proper support of scalable vector types in the analysis -
we can do better, but not today.
Reviewers: vitalybuka
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73394
Summary:
Enable the new diveregence analysis by default for AMDGPU.
Resubmit with test updates since GPUDA was causing failures on Windows.
Reviewers: rampitec, nhaehnle, arsenm, thakis
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73315
Summary: Fixes crash that could occur when a divergent terminator has an unreachable parent.
Reviewers: rampitec, nhaehnle, arsenm
Subscribers: jvesely, wdng, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73323
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Move the assert that checks for the end iterator inside the loop which
actually moves over the elements. This allows it to check that the
iteration stays within the range.
Summary:
Second patch in series to support Safe Whole Program Devirtualization
Enablement, see RFC here:
http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
Summarize vcall_visibility metadata in ThinLTO global variable summary.
Depends on D71907.
Reviewers: pcc, evgeny777, steven_wu
Subscribers: mehdi_amini, Prazek, inglorion, hiraditya, dexonsmith, arphaman, ostannard, llvm-commits, cfe-commits, davidxl
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71911
Apparently cache of AliasSetTrackers held by LICM was the only user of
SimpleAnalysis infrastructure. Now, given that we no longer have that
cache, this infrastructure is obsolete and, taking into account its
nature, we don't want any new solutions to be based on it.
Reviewers: asbirlea, fhahn, efriedma, reames
Reviewed-By: asbirlea
Differential Revision: https://reviews.llvm.org/D73085
This addresses https://bugs.llvm.org/show_bug.cgi?id=42801.
The m_c_ICmp() matcher is changed to provide the swapped predicate
if the operands are swapped.
Existing uses of m_c_ICmp() fall in one of two categories: Working
on equality predicates only, where swapping is irrelevant.
Or performing a manual swap, in which case this patch removes it.
The only exception is the foldICmpWithLowBitMaskedVal() fold, which
does not swap the predicate, and instead reasons about whether
a swap occurred or not for each predicate. Getting the swapped
predicate allows us to merge the logic for pairs of predicates,
instead of duplicating it.
Differential Revision: https://reviews.llvm.org/D72976
This patch also fixes up a number of cases in DAGCombine and
SelectionDAGBuilder where the size of a scalable vector is used in a
fixed-width context (thus triggering an assertion failure).
Reviewers: efriedma, c-rhodes, rovka, cameron.mcinally
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71215
In LLVM IR, vscale can be represented with an intrinsic. For some targets,
this is equivalent to the constexpr:
getelementptr <vscale x 1 x i8>, <vscale x 1 x i8>* null, i32 1
This can be used to propagate the value in CodeGenPrepare.
In ISel we add a node that can be legalized to one or more
instructions to materialize the runtime vector length.
This patch also adds SVE CodeGen support for VSCALE, which maps this
node to RDVL instructions (for scaled multiples of 16bytes) or CNT[HSD]
instructions (scaled multiples of 2, 4, or 8 bytes, respectively).
Reviewers: rengolin, cameron.mcinally, hfinkel, sebpop, SjoerdMeijer, efriedma, lattner
Reviewed by: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68203
Summary:
Follow-up from https://reviews.llvm.org/D71733. Also moved an
initialization to the base class, where it belonged in the first place.
Reviewers: eraman, davidxl
Reviewed By: davidxl
Subscribers: hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72949
As mentioned in D72643, we'd like to be able to assert that any select
of equivalent constants has been removed before we're deep into InstCombine.
But there's a loophole in that assertion for vectors with undef elements
that don't match exactly.
This patch should close that gap. If we have undefs, we can't safely
propagate those unless both constants elements for that lane are undef.
Differential Revision: https://reviews.llvm.org/D72958
Summary:
Loop unroll spends a lot of time in SCEVs processing in case when a function
contains hundreds of simple 'for' loops with a quite complex arrays indexes like
for (int i = 0; i < 8; ++i) {
for (int j = 0; j < 32; ++j) {
C[j*8+i] = B[j*32+i+128] + A[i*64+128];
}
}
for (int i = 0; i < 8; ++i) {
for (int j = 0; j < 8; ++j) {
for (int k = 0; k < 32; ++k) {
D[k*64+i*8+j] = D[k*64+i*8+j] + E[i+16] * C[k*8+j+256];
}
}
}
The patch improves loop unroll speed since isLoopBackedgeGuardedByCond takes
much less time than isLoopEntryGuardedByCond in the edge case.
Reviewers: skatkov, sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: fhahn, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72929
Static method MemoryDependenceResults::getLoadLoadClobberFullWidthSize
does not have or use any info specific to MemoryDependenceResults.
Move it to its only user: VNCoercion.
This is (more?) usable by GDB pretty printers and seems nicer to write.
There's one tricky caveat that in C++14 (LLVM's codebase today) the
static constexpr member declaration is not a definition - so odr use of
this constant requires an out of line definition, which won't be
provided (that'd make all these trait classes more annoyidng/expensive
to maintain). But the use of this constant in the library implementation
is/should always be in a non-odr context - only two unit tests needed to
be touched to cope with this/avoid odr using these constants.
Based on/expanded from D72590 by Christian Sigg.
Summary:
This commits is a rework of the patch in
https://reviews.llvm.org/D67572.
The rework was requested to prevent out-of-tree performance regression
when vectorizing out-of-tree IR intrinsics. The vectorization of such
intrinsics is enquired via the static function `isTLIScalarize`. For
detail see the discussion in https://reviews.llvm.org/D67572.
Reviewers: uabelho, fhahn, sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72734
Summary:
InlineResult is used both in APIs assessing whether a call site is
inlinable (e.g. llvm::isInlineViable) as well as in the function
inlining utility (llvm::InlineFunction). It means slightly different
things (can/should inlining happen, vs did it happen), and the
implicit casting may introduce ambiguity (casting from 'false' in
InlineFunction will default a message about hight costs,
which is incorrect here).
The change renames the type to a more generic name, and disables
implicit constructors.
Reviewers: eraman, davidxl
Reviewed By: davidxl
Subscribers: kerbowa, arsenm, jvesely, nhaehnle, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72744
This patch imports constant variables even when they can't be internalized
(which results in promotion). This offers some extra constant folding
opportunities.
Differential revision: https://reviews.llvm.org/D70404
If addrecexpr has nuw flag, the value should never be less than its
start value and start value does not required to be SCEVConstant.
Reviewed By: nikic, sanjoy
Differential Revision: https://reviews.llvm.org/D71690
Summary:
The goal is to simplify experimentation on the cost model. Today,
CallAnalyzer decides 2 things: legality, and benefit. The refactoring
keeps legality assessment in CallAnalyzer, and factors benefit
evaluation out, as an extension.
Reviewers: davidxl, eraman
Reviewed By: davidxl
Subscribers: kamleshbhalui, fedor.sergeev, hiraditya, baloghadamsoftware, haicheng, a.sidorin, Szelethus, donat.nagy, dkrupp, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71733
Teach SCEV about the @loop.decrement.reg intrinsic, which has exactly the same
semantics as a sub expression. This allows us to query hardware-loops, which
contain this @loop.decrement.reg intrinsic, so that we can calculate iteration
counts, exit values, etc. of hardwareloops.
This "int_loop_decrement_reg" intrinsic is defined as "IntrNoDuplicate". Thus,
while hardware-loops and tripcounts now become analysable by SCEV, this
prevents the usual loop transformations from applying transformations on
hardware-loops, which is what we want at this point, for which I have added
test cases for loopunrolling and IndVarSimplify and LFTR.
Differential Revision: https://reviews.llvm.org/D71563
This is step 1 of damage control assuming that we need to remove several
over-reaching folds for select-of-booleans because they can cause
miscompiles as shown in D72396.
The scalar case seems obviously safe:
https://rise4fun.com/Alive/jSj
And I don't think there's any danger for vectors either - if the
condition is poisoned, then the select must be poisoned too, so undef
elements don't make any difference.
Differential Revision: https://reviews.llvm.org/D72412
Summary:
The goal is to simplify experimentation on the cost model. Today,
CallAnalyzer decides 2 things: legality, and benefit. The refactoring
keeps legality assessment in CallAnalyzer, and factors benefit
evaluation out, as an extension.
Reviewers: davidxl, eraman
Subscribers: kamleshbhalui, fedor.sergeev, hiraditya, baloghadamsoftware, haicheng, a.sidorin, Szelethus, donat.nagy, dkrupp, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71733
Our out-of-tree custom aliasing solution for the HPC# Burst compiler
here at Unity makes use of the `ExternalAAwrapperPass` infrastructure to
insert our custom aliasing resolution into the core of LLVM. This is
great for all cases except for function inlining, where because
`createLegacyPMAAResults` does not make use of `ExternalAAWrapperPass`,
when we have a definite no-alias result within a function it won't be
propagated to the calling function during inlining.
This commit just rectifies this oversight by adding the missing
dependency.
Differential Revision: https://reviews.llvm.org/D71348
Summary:
Make `AAMDNodes`' `getAAMetadata()` and `setAAMetadata()` to take `!tbaa.struct`
into account as well as `!tbaa`. This impacts llvm.org/pr42022.
This is a temprorary fix needed to keep `!tbaa.struct` tag by SROA pass.
New field `TBAAStruct` should be deleted when `!tbaa` tag replaces `!tbaa.struct`.
Merging two `!tbaa.struct`'s to one is conservatively considered to be `nullptr`
(giving `MayAlias`) -- this could be enhanced, but relying on the said future
replacement.
Reviewers: RKSimon, spatel, vporpo
Subscribers: hiraditya, kosarev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70924
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
Summary:
[DA] Move common code in checkSrcSubscript and checkDstSubscript to a
new function checkSubscript. This avoids duplicate code and possible
out of sync in the future.
Reviewers: sebpop, jmolloy, reames
Reviewed By: sebpop
Subscribers: bmahjour, hiraditya, llvm-commits, amehsan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71087
Patch by zhongduo.
Summary:
All the use cases of CallAnalyzer use the same call site parameter to
both construct the CallAnalyzer, and then pass to the analysis member.
This change removes this duplication.
Reviewers: davidxl, eraman, Jim
Reviewed By: davidxl
Subscribers: Jim, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71645
Summary:
It is pretty common to assume that something is not zero.
Even optimizer itself sometimes emits such assumptions
(e.g. `addAssumeNonNull()` in `PromoteMemoryToRegister.cpp`).
But we currently don't deal with such assumptions :)
The only way `isKnownNonZero()` handles assumptions is
by calling `computeKnownBits()` which calls `computeKnownBitsFromAssume()`.
But `x != 0` does not tell us anything about set bits,
it only says that there are *some* set bits.
So naturally, `KnownBits` does not get populated,
and we fail to make use of this assumption.
I propose to deal with this special case by special-casing it
via adding a `isKnownNonZeroFromAssume()` that returns boolean
when there is an applicable assumption.
While there, we also deal with other predicates,
mainly if the comparison is with constant.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=43267 | PR43267 ]].
Differential Revision: https://reviews.llvm.org/D71660
This is a pretty rare case, when CxtI and assume are
in the same basic block, with assume being located later.
We were already checking that assumption was guaranteed to be
executed, but we omitted CxtI itself from consideration,
and as the test (miscompile) shows, that is incorrect.
As noted in D71660 review by @nikic.
Summary:
This patch associates ordinal numbers to the DDG Nodes allowing
the builder to order nodes within a pi-block in program order. The
algorithm works by simply assuming the order in which the BBList
is fed into the builder. The builder already relies on the blocks being
in program order so that it can compute the dependencies correctly.
Similarly the order of instructions in their parent basic blocks
determine their program order.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70986
Add an extra parameter so alignment can be taken under
consideration in gather/scatter legalization.
Differential Revision: https://reviews.llvm.org/D71610
Summary:
Follow-on to D66428 and D71193, to build the TLI per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
With D71193, the -fno-builtin* flags are converted to function
attributes, so we can now set this information per-function on the TLI.
In this patch, the TLI constructor is changed to take a Function, which
can be used to override the available builtins. The TLI is augmented
with an array that can be used to specify which builtins are not
available for the corresponding function. The available function checks
are changed to consult this override before checking the underlying
module level baseline TLII. New code is added to set this override
array based on the attributes.
I also removed the code that sets availability in the TLII in clang from
the options, which is no longer needed.
I removed a per-Triple caching of TLII objects in the analysis object,
as it is based on the Module's Triple which is the same for all
functions in any case. Is there a case where we would be compiling
multiple Modules with different Triples in one compilation?
Finally, I have changed the legacy analysis wrapper to create and use
the new PM analysis class (TargetLibraryAnalysis) in getTLI. This is
consistent with the behavior of getTTI for the legacy
TargetTransformInfo analysis. This change means that getTLI now creates
a new TLI on each call (although that should be very cheap as we cache
the module level TLII, and computing the per-function
attribute based availability should also be reasonably efficient).
I measured the compile time for a large C++ file with tens of thousands
of functions and as expected there was no increase.
Reviewers: chandlerc, hfinkel, gchatelet
Subscribers: mehdi_amini, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67923
shuf (inselt ?, C, IndexC), undef, <IndexC, IndexC...> --> <C, C...>
This is another missing shuffle fold pattern uncovered by the
shuffle correctness fix from D70246.
The problem was visible in the post-commit thread example, but
we managed to overcome the limitation for that particular case
with D71220.
This is something like the inverse of the previous fix - there
we didn't demand the inserted scalar, and here we are only
demanding an inserted scalar.
Differential Revision: https://reviews.llvm.org/D71488
This reverts commit 0be81968a2.
The VFDatabase needs some rework to be able to handle vectorization
and subsequent scalarization of intrinsics in out-of-tree versions of
the compiler. For more details, see the discussion in
https://reviews.llvm.org/D67572.
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
This is a rebase of the change over D70376, which fixes an LVI cache
invalidation issue that also affected this patch.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
Removed code duplication in ThreadCmpOverSelect and broke it
into several smaller functions for reusing them.
Differential Revision: https://reviews.llvm.org/D71158
This patch renames the LoopInfo::isRotated() method to LoopInfo::isRotatedForm()
to make it clear that the method checks whether the loop is in rotated form, not
whether the loop has been rotated by the LoopRotation pass.
In order to use assumptions, computeKnownBits needs a context
instruction. We can use the GEP, if it is an instruction. We already
pass the assumption cache, but it cannot be used without a context
instruction.
Reviewers: anemet, asbirlea, hfinkel, spatel
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D71264
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Soon Intrinsic::ID will be a plain integer, so this overload will not be
possible.
Rename both overloads to ensure that downstream targets observe this as
a build failure instead of a runtime failure.
Split off from D71320
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D71381
If the pointer was loaded/stored before the null check, the check
is redundant and can be removed. For now the optimizers do not
remove the nullptr check, see https://gcc.godbolt.org/z/H2r5GG.
The patch allows to use more nonnull constraints. Also, it found
one more optimization in some PowerPC test. This is my first llvm
review, I am free to any comments.
Differential Revision: https://reviews.llvm.org/D71177
Summary:
The current da printer shows the dependence without indicating
which instructions are being considered as the src vs dst. It
also silently ignores call instructions, despite the fact that
they create confused dependence edges to other memory
instructions. This patch addresses these two issues plus a
couple of minor non-functional improvements.
Authored By: bmahjour
Reviewer: dmgreen, fhahn, philip.pfaffe, chandlerc
Reviewed By: dmgreen, fhahn
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71088
Summary:
This patch adds a method to determine if a loop is in rotated form (the latch is
an exiting block). It also modifies the getLoopGuardBranch method to use this
new method. This method can also be used in Loopfusion. Once this patch lands I
will make the corresponding changes there.
Reviewers: jdoerfert, Meinersbur, dmgreen, etiotto, Whitney, fhahn, hfinkel
Reviewed By: Meinersbur
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65958
This patch introduced the VFDatabase, the framework proposed in
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html. [*]
In this patch the VFDatabase is used to bridge the TargetLibraryInfo
(TLI) calls that were previously used to query for the availability of
vector counterparts of scalar functions.
The VFISAKind field `ISA` of VFShape have been moved into into VFInfo,
under the assumption that different vector ISAs may provide the same
vector signature. At the moment, the vectorizer accepts any of the
available ISAs as long as the signature provided by the VFDatabase
matches the one expected in the vectorization process. For example,
when targeting AVX or AVX2, which both have 256-bit registers, the IR
signature of the two vector functions associated to the two ISAs is
the same. The `getVectorizedFunction` method at the moment returns the
first available match. We will need to add more heuristics to the
search system to decide which of the available version (TLI, AVX,
AVX2, ...) the system should prefer, when multiple versions with the
same VFShape are present.
Some of the code in this patch is based on the work done by Sumedh
Arani in https://reviews.llvm.org/D66025.
[*] Notice that in the proposal the VFDatabase was called SVFS. The
name VFDatabase is more in line with LLVM recommendations for
naming classes and variables.
Differential Revision: https://reviews.llvm.org/D67572
Summary:
Same as D60846 and D69571 but with a fix for the problem encountered
after them. Both times it was a missing context adjustment in the
handling of PHI nodes.
The reproducers created from the bugs that caused the old commits to be
reverted are included.
Reviewers: nikic, nlopes, mkazantsev, spatel, dlrobertson, uabelho, hakzsam, hans
Subscribers: hiraditya, bollu, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71181
This attempts to teach the cost model in Arm that code such as:
%s = shl i32 %a, 3
%a = and i32 %s, %b
Can under Arm or Thumb2 become:
and r0, r1, r2, lsl #3
So the cost of the shift can essentially be free. To do this without
trying to artificially adjust the cost of the "and" instruction, it
needs to get the users of the shl and check if they are a type of
instruction that the shift can be folded into. And so it needs to have
access to the actual instruction in getArithmeticInstrCost, which if
available is added as an extra parameter much like getCastInstrCost.
We otherwise limit it to shifts with a single user, which should
hopefully handle most of the cases. The list of instruction that the
shift can be folded into include ADC, ADD, AND, BIC, CMP, EOR, MVN, ORR,
ORN, RSB, SBC and SUB. This translates to Add, Sub, And, Or, Xor and
ICmp.
Differential Revision: https://reviews.llvm.org/D70966
This is another transform suggested in PR44153:
https://bugs.llvm.org/show_bug.cgi?id=44153
The backend for some targets already manages to get
this if it converts copysign to bitwise logic.
Summary:
This patch introduces an API to build and modify vector shapes.
The validity of a VFShape can be checked with the
`hasValidParameterList` method, which is also run in an assertion each
time a VFShape is modified.
The field VFISAKind has been moved to VFInfo under the assumption that
different ISAs can map to the same VFShape (as it can be in the case
of vector extensions with the same registers size, for example AVX and
AVX2).
Reviewers: sdesmalen, jdoerfert, simoll, hsaito
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70513
Variant on D70103. The caching is switched to always use a BB to
cache entry map, which then contains per-value caches. A separate
set contains value handles with a deletion callback. This allows us
to properly invalidate overdefined values.
A possible alternative would be to always cache by value first and
have per-BB maps/sets in the each cache entry. In that case we could
use a ValueMap and would avoid the separate value handle set. I went
with the BB indexing at the top level to make it easier to integrate
D69914, but possibly that's not the right choice.
Differential Revision: https://reviews.llvm.org/D70376
As it can be seen from accompanying cleanup, it is not unheard of
to write `~Known.Zero` meaning "what maximal value can this KnownBits
produce". But i think `~Known.Zero` isn't *that* self-explanatory,
as compared to a method with a name.
Note that not all `~Known.Zero` places were cleaned up,
only those where this arguably improves things.
Summary:
This fixes the memory leak in bec37c3fc7
and re-delivers the reverted patch.
In this patch the DDG DAG is sorted topologically to put the
nodes in the graph in the order that would satisfy all
dependencies. This helps transformations that would like to
generate code based on the DDG. Since the DDG is a DAG a
reverse-post-order traversal would give us the topological
ordering. This patch also sorts the basic blocks passed to
the builder based on program order to ensure that the
dependencies are computed in the correct direction.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70609
Summary: b19ec1eb3d has been reverted because of the test failures
with PowerPC targets. This patch addresses the issues from the previous
commit.
Test Plan: ninja check-all. Confirmed that CodeGen/PowerPC/pr36292.ll
and CodeGen/PowerPC/sms-cpy-1.ll pass
Subscribers: llvm-commits
New pass manager doesn't use verifyAnalysis, so currently there is no
way to call SCEV verification from command line when new PM is used.
This patch adds a pass that allows you to do that.
Reviewers: reames, fhahn, sanjoy.google, nikic
Reviewed By: fhahn
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70423
Currently every time we encounter an indirect call of a known function,
we try to evaluate the inline cost of that function. In case of a
recursion, that evaluation never stops.
The solution I propose is to evaluate only the indirect call of the
function, while any further indirect calls (of a known function) will be
treated just as direct function calls, which, actually, never tries to
evaluate the call.
Fixes PR35469.
Differential Revision: https://reviews.llvm.org/D69349
Summary:
While updatePostDominatedByUnreachable attemps to find basic blocks that are post-domianted by unreachable blocks, it currently cannot handle loops precisely, because it doesn't use the actual post dominator tree analysis but relies on heuristics of visiting basic blocks in post-order. More precisely, when the entire loop is post-dominated by the unreachable block, current algorithm fails to detect the entire loop as post-dominated by the unreachable because when the algorithm reaches to the loop latch it fails to tell all its successors (including the loop header) will "eventually" be post-domianted by the unreachable block, because the algorithm hasn't visited the loop header yet. This makes BPI for the loop latch to assume that loop backedges are taken with 100% of probability. And because of this, block frequency info sometimes marks virtually dead loops (which are post dominated by unreachable blocks) super hot, because 100% backedge-taken probability makes the loop iteration count the max value. updatePostDominatedByColdCall has the exact same problem as well.
To address this problem, this patch makes PostDominatedByUnreachable/PostDominatedByColdCall to be computed with the actual post-dominator tree.
Reviewers: skatkov, chandlerc, manmanren
Reviewed By: skatkov
Subscribers: manmanren, vsk, apilipenko, Carrot, qcolombet, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70104
This is correct for any value including NaN/inf.
We don't have this fold directly in the backend either,
but x86 manages to get it after converting things to bitops.
Summary:
Combine three verification methods into one to improve compile time when asserts are enabled.
Motivated by PR44066.
Sample change of timings on testcase in PR44066 (release+asserts):
MSSA off or verification disabled: 1.13s.
MSSA on (ToT): 2.48s.
With patch: 2.03s.
With enabling DefUses after combining Domination+Ordering: 2.6s.
After also combining DefUses with Domination+Ordering: 2.06s (candidate to be taken out of EXPENSIVE_CHECKS).
Subscribers: Prazek, hiraditya, george.burgess.iv, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70618
Summary:
In this patch the DDG DAG is sorted topologically to put the
nodes in the graph in the order that would satisfy all
dependencies. This helps transformations that would like to
generate code based on the DDG. Since the DDG is a DAG a
reverse-post-order traversal would give us the topological
ordering. This patch also sorts the basic blocks passed to
the builder based on program order to ensure that the
dependencies are computed in the correct direction.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70609
This version contains 2 fixes for reported issues:
1. Make sure we do not try to sink terminator instructions.
2. Make sure we bail out, if we try to sink an instruction that needs to
stay in place for another recurrence.
Original message:
If the recurrence PHI node has a single user, we can sink any
instruction without side effects, given that all users are dominated by
the instruction computing the incoming value of the next iteration
('Previous'). We can sink instructions that may cause traps, because
that only causes the trap to occur later, but not on any new paths.
With the relaxed check, we also have to make sure that we do not have a
direct cycle (meaning PHI user == 'Previous), which indicates a
reduction relation, which potentially gets missed by
ReductionDescriptor.
As follow-ups, we can also sink stores, iff they do not alias with
other instructions we move them across and we could also support sinking
chains of instructions and multiple users of the PHI.
Fixes PR43398.
Reviewers: hsaito, dcaballe, Ayal, rengolin
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D69228
Currently every time we encounter an indirect call of a known function,
we try to evaluate the inline cost of that function. In case of a
recursion, that evaluation never stops.
The solution presented is to evaluate only the indirect call of the
function, while any further indirect calls (of a known function) will be
treated just as direct function calls, which, actually, never tries to
evaluate the call.
Fixes PR35469.
Differential Revision: https://reviews.llvm.org/D69349
Remove redundant map searches.
For example, every call to "operator[]" is actually translated to a
"find" call, and 2 consecutive calls to the operator, without changing
the map in-between, is just redundant, and inefficient.
Differential Revision: https://reviews.llvm.org/D69337
moved before another instruction.
Summary:Added an API to check if an instruction can be safely moved
before another instruction. In future PRs, we will like to add support
of moving instructions between blocks that are not control flow
equivalent, and add other APIs to enhance usability, e.g. moving basic
blocks, moving list of instructions...
Loop Fusion will be its first user. When there is intervening code in
between two loops, fusion is currently unable to fuse them. Loop Fusion
can use this utility to check if the intervening code can be safely
moved before or after the two loops, and move them, then it can
successfully fuse them.
Reviewer:kbarton,jdoerfert,Meinersbur,bmahjour,etiotto
Reviewed By:bmahjour
Subscribers:mgorny,hiraditya,llvm-commits
Tag:LLVM
Differential Revision:https://reviews.llvm.org/D70049
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
As a reminder, a "widenable branch" is the pattern "br i1 (and i1 X, WC()), label %taken, label %untaken" where "WC" is the widenable condition intrinsics. The semantics of such a branch (derived from the semantics of WC) is that a new condition can be added into the condition arbitrarily without violating legality.
Broaden the definition in two ways:
Allow swapped operands to the br (and X, WC()) form
Allow widenable branch w/trivial condition (i.e. true) which takes form of br i1 WC()
The former is just general robustness (e.g. for X = non-instruction this is what instcombine produces). The later is specifically important as partial unswitching of a widenable range check produces exactly this form above the loop.
Differential Revision: https://reviews.llvm.org/D70502
For the various trip-count tests, the classification isn't useful and makes the auto-generated tests super verbose. By skipping it, we make the auto-gen tests closer to the manually written ones. Up next: auto-genning a bunch of the existings tests.
Simple loop unswitch likes to leave around unsimplified and/or/xors. SCEV today bails out on these idioms which is unfortunate in general, and specifically for the unswitch interaction.
Differential Revision: https://reviews.llvm.org/D70459
Moving accesses in MemorySSA at InsertionPlace::End, when an instruction is
moved into a block, almost always means insert at the end of the block, but
before the block terminator. This matters when the block terminator is a
MemoryAccess itself (an invoke), and the insertion must be done before
the terminator for the update to be correct.
Insert an additional position: InsertionPlace:BeforeTerminator and update
current usages where this applies.
Resolves PR44027.
With the widenable condition construct, we have the ability to reason about branches which can be 'widened' (i.e. made to fail more often). We've got a couple o transforms which leverage this. This patch just cleans up the API a bit.
This is prep work for generalizing our definition of a widenable branch slightly. At the moment "br i1 (and A, wc()), ..." is considered widenable, but oddly, neither "br i1 (and wc(), B), ..." or "br i1 wc(), ..." is. That clearly needs addressed, so first, let's centralize the code in one place.
Summary:
Dependence anlysis has a mechanism to cache results. Thus for particular memory access the cache keep track of side effects in basic blocks. The problem is that for invariant loads dependepce analysis legally ignores many dependencies due to a special semantic rules for such loads. But later results calculated for invariant load retrived from the cache for general case acceses. As a result we have wrong dependence information causing GVN to do illegal transformation. Fixes, T42151.
Proposed solution is to disable caching of invariant loads. I think such loads a pretty rare and it doesn't make sense to extend caching mechanism for them.
Reviewers: reames, chandlerc, skatkov, morisset, jdoerfert
Reviewed By: reames
Subscribers: hiraditya, test, jdoerfert, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64405
Ensure the stride and trip count have the same type before multiplying them during reference cost calculation
Reviewed By: jdoefert
Differential Revision: https://reviews.llvm.org/D70192
This patch introduces a function pass to inject the scalar-to-vector
mappings stored in the TargetLIbraryInfo (TLI) into the Vector
Function ABI (VFABI) variants attribute.
The test is testing the injection for three vector libraries supported
by the TLI (Accelerate, SVML, MASSV).
The pass does not change any of the analysis associated to the
function.
Differential Revision: https://reviews.llvm.org/D70107
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
This caused miscompiles of Chromium (https://crbug.com/1023818). The reduced
repro is small enough to fit here:
$ cat /tmp/a.c
unsigned char f(unsigned char *p) {
unsigned char result = 0;
for (int shift = 0; shift < 1; ++shift)
result |= p[0] << (shift * 8);
return result;
}
$ bin/clang -O2 -S -o - /tmp/a.c | grep -A4 f:
f: # @f
.cfi_startproc
# %bb.0: # %entry
xorl %eax, %eax
retq
That's nicely optimized, but I don't think it's the right result :-)
> Same as D60846 but with a fix for the problem encountered there which
> was a missing context adjustment in the handling of PHI nodes.
>
> The test that caused D60846 to be reverted was added in e15ab8f277.
>
> Reviewers: nikic, nlopes, mkazantsev,spatel, dlrobertson, uabelho, hakzsam
>
> Subscribers: hiraditya, bollu, llvm-commits
>
> Tags: #llvm
>
> Differential Revision: https://reviews.llvm.org/D69571
This reverts commit 57dd4b03e4.
Summary:
This patch adds a custom ISA for vector functions for internal use
in LLVM. The <isa> token is set to "_LLVM_", and it is not attached
to any specific instruction Vector ISA, or Vector Function ABI.
The ISA is used as a token for handling Vector Function ABI-style
vectorization for those vector functions that are not directly
associated to any existing Vector Function ABI (for example, some of
the vector functions exposed by TargetLibraryInfo). The demangling
function for this ISA in a Vector Function ABI context is set to be
the same as the common one shared between X86 and AArch64.
Reviewers: jdoerfert, sdesmalen, simoll
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70089
Summary:
If there are any internal methods whose address was taken, conclude there is nothing known in relation of any other internal method and a global.
Reviewers: nlopes, sanjoy.google
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69690
Don't try to canonicalize loads to scalable vector types to loads
of integers.
This removes one assertion when trying to use a TypeSize as a parameter
to DataLayout::isLegalInteger. It does not handle the second part of the
function (which looks at bitcasts).
This patch also contains a NFC fix for Load Analysis, where a variable
initialization that would cause the same assertion is moved closer to
its use. This allows us to run the new test for InstCombine without
having to teach LocationSize to play nicely with scalable vectors.
Differential Revision: https://reviews.llvm.org/D70075
The attribute is stored at the `FunctionIndex` attribute set, with the
name "vector-function-abi-variant".
The get/set methods of the attribute have assertion to verify that:
1. Each name in the attribute is a valid VFABI mangled name.
2. Each name in the attribute correspond to a function declared in the
module.
Differential Revision: https://reviews.llvm.org/D69976
Summary:This patch fixes the following warnings uncovered by PVS
Studio:
/home/xbolva00/LLVM/llvm-project/llvm/lib/Analysis/LoopCacheAnalysis.cpp
353 warn V612 An unconditional 'return' within a loop.
/home/xbolva00/LLVM/llvm-project/llvm/lib/Analysis/LoopCacheAnalysis.cpp
456 err V502 Perhaps the '?:' operator works in a different way than it
was expected. The '?:' operator has a lower priority than the '=='
operator.
Authored By:etiotto
Reviewer:Meinersbur, kbarton, bmahjour, Whitney, xbolva00
Reviewed By:xbolva00
Subscribers:hiraditya, llvm-commits
Tag:LLVM
Differential Revision:https://reviews.llvm.org/D69821
Summary: A user can force a function to be inlined by specifying the always_inline attribute. Currently, thinlto implementation is not aware of always_inline functions and does not guarantee import of such functions, which in turn can prevent inlining of such functions.
Patch by Bharathi Seshadri <bseshadr@cisco.com>
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70014
Summary:
This patch adds Pi Blocks to the DDG. A pi-block represents a group of DDG
nodes that are part of a strongly-connected component of the graph.
Replacing all the SCCs with pi-blocks results in an acyclic representation
of the DDG. For example if we have:
{a -> b}, {b -> c, d}, {c -> a}
the cycle a -> b -> c -> a is abstracted into a pi-block "p" as follows:
{p -> d} with "p" containing: {a -> b}, {b -> c}, {c -> a}
In this implementation the edges between nodes that are part of the pi-block
are preserved. The crossing edges (edges where one end of the edge is in the
set of nodes belonging to an SCC and the other end is outside that set) are
replaced with corresponding edges to/from the pi-block node instead.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D68827
Fix cache invalidation by not guarding the dereferenced pointer cache
erasure by SeenBlocks. SeenBlocks is only populated when actually
caching a value in the block, which doesn't necessarily have to happen
just because dereferenced pointers were calculated.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
This reverts commit 15bc4dc9a8.
clang-cmake-x86_64-sde-avx512-linux buildbot reported quite a few
compile-time regressions in test-suite, will investigate.
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
It broke Chromium, causing "Instruction does not dominate all uses!" errors.
See https://bugs.chromium.org/p/chromium/issues/detail?id=1022297#c1 for a
reproducer.
> If the recurrence PHI node has a single user, we can sink any
> instruction without side effects, given that all users are dominated by
> the instruction computing the incoming value of the next iteration
> ('Previous'). We can sink instructions that may cause traps, because
> that only causes the trap to occur later, but not on any new paths.
>
> With the relaxed check, we also have to make sure that we do not have a
> direct cycle (meaning PHI user == 'Previous), which indicates a
> reduction relation, which potentially gets missed by
> ReductionDescriptor.
>
> As follow-ups, we can also sink stores, iff they do not alias with
> other instructions we move them across and we could also support sinking
> chains of instructions and multiple users of the PHI.
>
> Fixes PR43398.
>
> Reviewers: hsaito, dcaballe, Ayal, rengolin
>
> Reviewed By: Ayal
>
> Differential Revision: https://reviews.llvm.org/D69228
We had a subtle, but nasty bug in our definition of a widenable branch, and thus in the transforms which used that utility. Specifically, we returned true for any branch which included a widenable condition within it's condition, regardless of whether that widenable condition also had other uses.
The problem is that the result of the WC() call is defined to be one particular value. As such, all users must agree as to what that value is. If we widen a branch without also updating *all other users* of the WC in the same way, we have broken the required semantics.
Most of the textual diff is updating existing transforms not to leave dead uses hanging around. They're largely NFC as the dead instructions would be immediately deleted by other passes. The reason to make these changes is so that the transforms preserve the widenable branch form.
In practice, we don't get bitten by this only because it isn't profitable to CSE WC() calls and the lowering pass from guards uses distinct WC calls per branch.
Differential Revision: https://reviews.llvm.org/D69916
This patch fixes two issues noticed by inspection when going to enable the loop predication code in IndVarSimplify.
Issue 1 - Both the LoopPredication transform, and the already on by default optimizeLoopExits transform, modify the exit count of the exits they modify. (either to 0 or Infinity) Looking at the code more closely, this was not reflected into SCEV and we were instead running later transforms with incorrect SCEVs. Fixing this requires forgetting the loop, weakening a too strong assert, and updating SCEV to not pessimize results when a loop is provable untaken. I haven't been able to find a test case to demonstrate the miscompile.
Issue 2 - For modules without a data layout, we can end up with unsized pointer typed exit counts. Just bail out of this case.
I think these are the last two issues which need addressed before we enable this by default. The code has already survived a decent amount of fuzzing without revealing either of the above.
Differential Revision: https://reviews.llvm.org/D69695
We have two ways to steer creating a predicated vector body over creating a
scalar epilogue. To force this, we have 1) a command line option and 2) a
pragma available. This adds a third: a target hook to TargetTransformInfo that
can be queried whether predication is preferred or not, which allows the
vectoriser to make the decision without forcing it.
While this change behaves as a non-functional change for now, it shows the
required TTI plumbing, usage of this new hook in the vectoriser, and the
beginning of an ARM MVE implementation. I will follow up on this with:
- a complete MVE implementation, see D69845.
- a patch to disable this, i.e. we should respect "vector_predicate(disable)"
and its corresponding loophint.
Differential Revision: https://reviews.llvm.org/D69040
If the recurrence PHI node has a single user, we can sink any
instruction without side effects, given that all users are dominated by
the instruction computing the incoming value of the next iteration
('Previous'). We can sink instructions that may cause traps, because
that only causes the trap to occur later, but not on any new paths.
With the relaxed check, we also have to make sure that we do not have a
direct cycle (meaning PHI user == 'Previous), which indicates a
reduction relation, which potentially gets missed by
ReductionDescriptor.
As follow-ups, we can also sink stores, iff they do not alias with
other instructions we move them across and we could also support sinking
chains of instructions and multiple users of the PHI.
Fixes PR43398.
Reviewers: hsaito, dcaballe, Ayal, rengolin
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D69228
Same as D60846 but with a fix for the problem encountered there which
was a missing context adjustment in the handling of PHI nodes.
The test that caused D60846 to be reverted was added in e15ab8f277.
Reviewers: nikic, nlopes, mkazantsev,spatel, dlrobertson, uabelho, hakzsam
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69571
I left a memory leak in a printer pass which made LSan sad so I remove
the memory leak now to make LSan happy.
Reported and tested by vlad.tsyrklevich.
New code introduced in fe799c97fa caused clang to complain with
../lib/Analysis/MustExecute.cpp:360:34: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
GetterTy<LoopInfo> LIGetter = [this](const Function &F) {
^~~~
../lib/Analysis/MustExecute.cpp:365:44: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
GetterTy<PostDominatorTree> PDTGetter = [this](const Function &F) {
^~~~
2 errors generated.
Summary:
If a conditional branch is encountered we can try to find a join block
where the execution is known to continue. This means finding a suitable
block, e.g., the immediate post dominator of the conditional branch, and
proofing control will always reach that block.
This patch implements different techniques that work with and without
provided analysis.
Reviewers: uenoku, sstefan1, hfinkel
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68933
We were already going to all of the trouble of computing maximum constant exit counts for each loop exit, we might as well expose them through the API. The change in IndVars is mostly to demonstrate that the wired up code works, but it als very slightly strengthens the transform. The strengthened case is rather narrow though: it requires one exactly analyzeable exit, one imprecisely analyzeable exit (with the upper bound less than the precise one), and one unanalyzeable exit. I coudn't construct a reasonably stable test case.
This does increase the memory usage of the BackedgeTakenCount by a factor of 2 in the worst case.
I also noticed the loop in IndVars is O(#Exits ^ 2). This doesn't change with this patch. A future patch will cache this result inside of SCEV to avoid requering.
This is a first step in figuring out a proper API for maximum (non constant) exit counts. This may evolve a bit as we get experience with the API needs; suggestions very welcome. This patch just tried to provide a framework that we can later add maximum too in a clean and obvious way.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69216
llvm-svn: 375398
This is a common idiom which arises after induction variables are widened, and we have two or more exit conditions. Interestingly, we don't have instcombine or instsimplify support for this either.
Differential Revision: https://reviews.llvm.org/D69006
llvm-svn: 375349
Remove dead virtual functions from vtables with
replaceNonMetadataUsesWith, so that CGProfile metadata gets cleaned up
correctly.
Original commit message:
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 375094
Add an extra parameter so the backend can take the alignment into
consideration.
Differential Revision: https://reviews.llvm.org/D68400
llvm-svn: 374763
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374634
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 374539
Currently -verify-scev only fails if there is a constant difference
between two BE counts. This misses a lot of cases.
This patch adds a -verify-scev-strict options, which fails for any
non-zero differences, if used together with -verify-scev.
With the stricter checking, some unit tests fail because
of mis-matches, especially around IndVarSimplify.
If there is no reason I am missing for just checking constant deltas, I
am planning on looking into the various failures.
Reviewers: efriedma, sanjoy.google, reames, atrick
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D68592
llvm-svn: 374535
When simplifying a Phi to the unique value found incoming, check that
there wasn't a Phi already created to break a cycle. If so, remove it.
Resolves PR43541.
Some additional nits included.
llvm-svn: 374471
This patch improves the handling of pointer offset in GEP expressions where
one argument is the base pointer. isPointerOffset() is being used by memcpyopt
where current code synthesizes consecutive 32 bytes stores to one store and
two memset intrinsic calls. With this patch, we convert the stores to one
memset intrinsic.
Differential Revision: https://reviews.llvm.org/D67989
llvm-svn: 374454
Summary:
Whenever we get the previous definition, the assumption is that the
recursion starts ina reachable block.
If the recursion starts in an unreachable block, we may recurse
indefinitely. Handle this case by returning LoE if the block is
unreachable.
Resolves PR43426.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68809
llvm-svn: 374447
Move the default implementations of cache and prefetch queries to
TargetTransformInfoImplBase and delete them from NoTIIImpl. This brings these
interfaces in line with how other TTI interfaces work.
Differential Revision: https://reviews.llvm.org/D68804
llvm-svn: 374446
Re-apply 9fdfb045ae8b/r365676 with fixes for PPC and Hexagon. This involved
moving defaults from TargetTransformInfoImplBase to MCSubtargetInfo.
Rework the TTI cache and software prefetching APIs to prepare for the
introduction of a general system model. Changes include:
- Marking existing interfaces const and/or override as appropriate
- Adding comments
- Adding BasicTTIImpl interfaces that delegate to a subtarget
implementation
- Moving the default TargetTransformInfoImplBase implementation to a default
MCSubtarget implementation
Only a handful of targets use these interfaces currently: AArch64, Hexagon, PPC
and SystemZ. AArch64 already has a custom subtarget implementation, so its
custom TTI implementation is migrated to use the new facilities in BasicTTIImpl
to invoke its custom subtarget implementation. The custom TTI implementations
continue to exist for the other targets with this change. They are not moved
over to subtarget-based implementations.
The end goal is to have the default subtarget implementation defer to the system
model defined by the target. With this change, the default MCSubtargetInfo
implementation essentially returns the defaults TargetTransformInfoImplBase used
to return. Existing users of TTI defaults will hit the defaults now in
MCSubtargetInfo. Targets that define their own custom TTI implementations won't
use the BasicTTIImpl implementations that route to the subtarget.
Once system models are in place for the targets that use these interfaces, their
custom TTI implementations can be removed.
Differential Revision: https://reviews.llvm.org/D63614
llvm-svn: 374205
Summary:
The rule for the moveAllAfterMergeBlocks API si for all instructions
from `From` to have been moved to `To`, while keeping the CFG edges (and
block terminators) unchanged.
Update all the callsites for moveAllAfterMergeBlocks to follow this.
Pending follow-up: since the same behavior is needed everytime, merge
all callsites into one. The common denominator may be the call to
`MergeBlockIntoPredecessor`.
Resolves PR43569.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68659
llvm-svn: 374177
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
This reverts SVN r373833, as it caused a failed assert "Non-zero loop
cost expected" on building numerous projects, see PR43582 for details
and reproduction samples.
llvm-svn: 373882
Summary: The assertion in getLoopGuardBranch can be a 'return nullptr'
under if condition.
Authored By: DTharun
Reviewer: Whitney, fhahn
Reviewed By: Whitney, fhahn
Subscribers: fhahn, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D66084
llvm-svn: 373857
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a scalar cost model adjustment with a conservative pattern match and cost
summation for a multi-instruction sequence that can probably be reduced later.
This should prevent SLP from creating a vector reduction unless that sequence is
extremely cheap.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
llvm-svn: 373833
MemoryPhis should be added in the IDF of the blocks newly gaining Defs.
This includes the blocks that gained a Phi and the block gaining a Def,
if the block did not have one before.
Resolves PR43427.
llvm-svn: 373505
The static analyzer is warning about a potential null dereference, but we should be able to use cast<MemoryAccess> directly and if not assert will fire for us.
llvm-svn: 373467
The static analyzer is warning about potential null dereferences, but in these cases we should be able to use cast<SCEVConstant> directly and if not assert will fire for us.
llvm-svn: 373465
In similar fashion to D67721, we can simplify FMA multiplications if any
of the operands is NaN or undef. In instcombine, we will simplify the
FMA to an fadd with a NaN operand, which in turn gets folded to NaN.
Note that this just changes SimplifyFMAFMul, so we still not catch the
case where only the Add part of the FMA is Nan/Undef.
Reviewers: cameron.mcinally, mcberg2017, spatel, arsenm
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D68265
llvm-svn: 373459
This is intended to be similar to the constant folding results from
D67446
and earlier, but not all operands are constant in these tests, so the
responsibility for folding is left to InstSimplify.
Differential Revision: https://reviews.llvm.org/D67721
llvm-svn: 373455
Summary:
This patch adds Root Node to the DDG. The purpose of the root node is to create a single entry node that allows graph walk iterators to iterate through all nodes of the graph, making sure that no node is left unvisited during a graph walk (eg. SCC or DFS). Once the DDG is fully constructed it will have exactly one root node. Every node in the graph is reachable from the root. The algorithm for connecting the root node is based on depth-first-search that keeps track of visited nodes to try to avoid creating unnecessary edges.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D67970
llvm-svn: 373386
If a single predecessor is found, still check if the block is
unreachable. The test that found this had a self loop unreachable block.
Resolves PR43493.
llvm-svn: 373383
The check for "was there an access in this block" should be: is the last
access in this block and is it not a newly inserted phi.
Resolves new test in PR43438.
Also fix a typo when simplifying trivial Phis to match the comment.
llvm-svn: 373380
This reverts r366419 because the analysis performed is within the context of
the loop and it's only valid to add wrapping flags to "global" expressions if
they're always correct.
llvm-svn: 373184
exits"
Get a better approach in https://reviews.llvm.org/D68107 to solve the problem.
Revert the initial patch and will commit the new one soon.
This reverts commit rL372990.
llvm-svn: 373044
Summary: As discussed in the loop group meeting. With the current
definition of loop guard, we should not allow multiple loop exiting
blocks. For loops that has multiple loop exiting blocks, we can simply
unable to find the loop guard.
When getUniqueExitBlock() obtains a vector size not equals to one, that
means there is either no exit blocks or there exists more than one
unique block the loop exit to.
If we don't disallow loop with multiple loop exit blocks, then with our
current implementation, there can exist exit blocks don't post dominated
by the non pre-header successor of the guard block.
Reviewer: reames, Meinersbur, kbarton, etiotto, bmahjour
Reviewed By: Meinersbur, kbarton
Subscribers: fhahn, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D66529
llvm-svn: 373011
The static analyzer is warning about a potential null dereference, but we should be able to use cast<ExtractValueInst> directly and if not assert will fire for us.
llvm-svn: 372993
for extreme large case.
We had a case that a single loop which has 4000 exits and the average number
of predecessors of each exit is > 1000, and we found compiling the case spent
a significant amount of time on checking whether a loop has dedicated exits.
This patch adds a limit for the iterations to the check. With the patch, the
time to compile our testcase reduced from 1000s to 200s (clang release build).
Differential Revision: https://reviews.llvm.org/D67359
llvm-svn: 372990
The static analyzer is warning about a potential null dereferences, but since the pointer is only used in a switch statement for Operator::getOpcode() (with an empty default) then its easiest just to wrap this in a null test as the dyn_cast might return null here.
llvm-svn: 372962
Previously we might attempt to use a BitCast to turn bits into vectors of pointers,
but that requires an inttoptr cast to be legal. Add an assertion to detect the formation of illegal bitcast attempts
early (in the tests, we often constant-fold away the result before getting to this assertion check),
while being careful to still handle the early-return conditions without adding extra complexity in the result.
Patch by Jameson Nash <jameson@juliacomputing.com>.
Differential Revision: https://reviews.llvm.org/D65057
llvm-svn: 372940
Summary:
If a block has all incoming values with the same MemoryAccess (ignoring
incoming values from unreachable blocks), then use that incoming
MemoryAccess and do not create a Phi in the first place.
Revert IDF work-around added in rL372673; it should not be required unless
the Def inserted is the first in its block.
The patch also cleans up a series of tests, added during the many
iterations on insertDef.
The patch also fixes PR43438.
The same issue that occurs in insertDef with "adding phis, hence the IDF of
Phis is needed", can also occur in fixupDefs: the `getPreviousRecursive`
call only adds Phis walking on the predecessor edges, which means there
may be the case of a Phi added walking the CFG "backwards" which
triggers the needs for an additional Phi in successor blocks.
Such Phis are added during fixupDefs only in the presence of unreachable
blocks.
Hence this highlights the need to avoid adding Phis in blocks with
unreachable predecessors in the first place.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67995
llvm-svn: 372932
Because we do not constant fold multiplications in SimplifyFMAMul,
we match 1.0 and 0.0 for both operands, as multiplying by them
is guaranteed to produce an exact result (if it is allowed to do so).
Note that it is not enough to just swap the operands to ensure a
constant is on the RHS, as we want to also cover the case with
2 constants.
Reviewers: lebedev.ri, spatel, reames, scanon
Reviewed By: lebedev.ri, reames
Differential Revision: https://reviews.llvm.org/D67553
llvm-svn: 372915
As @reames pointed out post-commit, rL371518 adds additional rounding
in some cases, when doing constant folding of the multiplication.
This breaks a guarantee llvm.fma makes and must be avoided.
This patch reapplies rL371518, but splits off the simplifications not
requiring rounding from SimplifFMulInst as SimplifyFMAFMul.
Reviewers: spatel, lebedev.ri, reames, scanon
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D67434
llvm-svn: 372899
Currently m_Br only takes references to BasicBlock*, which limits its
flexibility. For example, you have to declare a variable, even if you
ignore the result or you have to have additional checks to make sure the
matched BB matches an expected one.
This patch adds m_BasicBlock and m_SpecificBB matchers, which can be
used like the existing matchers for constants or values.
I also had a look at the existing uses and updated a few. IMO it makes
the code a bit more explicit.
Reviewers: spatel, craig.topper, RKSimon, majnemer, lebedev.ri
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68013
llvm-svn: 372885
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917 <https://reviews.llvm.org/D61917>
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372878
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372866
Summary:
MemoryPhis may be needed following a Def insertion inthe IDF of all the
new accesses added (phis + potentially a def). Ensure this also occurs when
only the new MemoryPhis are the defining accesses.
Note: The need for computing IDF here is because of new Phis added with
edges incoming from unreachable code, Phis that had previously been
simplified. The preferred solution is to not reintroduce such Phis.
This patch is the needed fix while working on the preferred solution.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67927
llvm-svn: 372673
Static analyzer complains about const_cast uninitialized variables, we should explicitly set these to null.
Ideally that const wrapper would go away though.......
llvm-svn: 372603
Summary:
The CallAnalyzer::visitSwitchInst has an early exit when the estimated
lower bound of the switch cost will put the overall cost of the inline
above the threshold. However, this code is not correctly estimating the
lower bound for switches that can be transformed into bit tests, leading
to unnecessary lost inlines, and also differing behavior with
optimization remarks enabled.
First, the early exit is controlled by whether ComputeFullInlineCost is
enabled or not, and that in turn is disabled by default but enabled when
enabling -pass-remarks=missed. This by itself wouldn't lead to a
problem, except that as described below, the lower bound can be above
the real lower bound, so we can sometimes get different inline decisions
with inline remarks enabled, which is problematic.
The early exit was added in along with a new switch cost model in D31085.
The reason why this early exit was added is due to a concern one reviewer
raised about compile time for large switches:
https://reviews.llvm.org/D31085?id=94559#inline-276200
However, the code just below there calls
getEstimatedNumberOfCaseClusters, which in turn immediately calls
BasicTTIImpl getEstimatedNumberOfCaseClusters, which in the worst case
does a linear scan of the cases to get the high and low values. The
bit test handling in particular is guarded by whether the number of
cases fits into the max bit width. There is no suggestion that anyone
measured a compile time issue, it appears to be theoretical.
The problem is that the reviewer's comment about the lower bound
calculation is incorrect, specifically in the case of a switch that can
be lowered to a bit test. This isn't followed up on the comment
thread, but the author does add a FIXME to that effect above the early
exit added when they subsequently revised the patch.
As a result, we were incorrectly early exiting and not inlining
functions with switch statements that would be lowered to bit tests in
cases where we were nearing the threshold. Combined with the fact that
this early exit was skipped with opt remarks enabled, this caused
different inlining decisions to be made when -pass-remarks=missed is
enabled to debug the missing inline.
Remove the early exit for the above reasons.
I also copied over an existing AArch64 inlining test to X86, and
adjusted the threshold so that the bit test inline only occurs with the
fix in this patch.
Reviewers: davidxl
Subscribers: eraman, kristof.beyls, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67716
llvm-svn: 372440
At present, `-scalar-evolution-max-iterations` is a `cl::Optional`
option, which means it demands to be passed exactly zero or one times.
Our build system makes it pretty tricky to guarantee this. We often
accidentally pass the flag more than once (but always with the same
value) which results in an error, after which compilation fails:
```
clang (LLVM option parsing): for the -scalar-evolution-max-iterations option: may only occur zero or one times!
```
It seems reasonable to allow -scalar-evolution-max-iterations to be
passed more than once. Quoting the [[ http://llvm.org/docs/CommandLine.html#controlling-the-number-of-occurrences-required-and-allowed | documentation ]]:
> The cl::ZeroOrMore modifier ... indicates that your program will allow the option to be specified zero or more times.
> ...
> If an option is specified multiple times for an option of the cl::opt class, only the last value will be retained.
Original patch by: Enrico Bern Hardy Tanuwidjaja <etanuwid@fb.com>
Differential Revision: https://reviews.llvm.org/D67512
llvm-svn: 372346
This patch implements the demangling functionality as described in the
Vector Function ABI. This patch will be used to implement the
SearchVectorFunctionSystem (SVFS) as described in the RFC:
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html
A fuzzer is added to test the demangling utility.
Patch by Sumedh Arani <sumedh.arani@arm.com>
Differential revision: https://reviews.llvm.org/D66024
llvm-svn: 372343
Summary:
This is the first patch in a series of patches that will implement data dependence graph in LLVM. Many of the ideas used in this implementation are based on the following paper:
D. J. Kuck, R. H. Kuhn, D. A. Padua, B. Leasure, and M. Wolfe (1981). DEPENDENCE GRAPHS AND COMPILER OPTIMIZATIONS.
This patch contains support for a basic DDGs containing only atomic nodes (one node for each instruction). The edges are two fold: def-use edges and memory-dependence edges.
The implementation takes a list of basic-blocks and only considers dependencies among instructions in those basic blocks. Any dependencies coming into or going out of instructions that do not belong to those basic blocks are ignored.
The algorithm for building the graph involves the following steps in order:
1. For each instruction in the range of basic blocks to consider, create an atomic node in the resulting graph.
2. For each node in the graph establish def-use edges to/from other nodes in the graph.
3. For each pair of nodes containing memory instruction(s) create memory edges between them. This part of the algorithm goes through the instructions in lexicographical order and creates edges in reverse order if the sink of the dependence occurs before the source of it.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur, fhahn, myhsu
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D65350
llvm-svn: 372238
Summary:
This fixes B42473 and B42706.
This patch makes the SDA propagate branch divergence until the end of the RPO traversal. Before, the SyncDependenceAnalysis propagated divergence only until the IPD in rpo order. RPO is incompatible with post dominance in the presence of loops. This made the SDA crash because blocks were missed in the propagation.
Reviewers: foad, nhaehnle
Reviewed By: foad
Subscribers: jvesely, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65274
llvm-svn: 372223
Summary:
This is the first patch in a series of patches that will implement data dependence graph in LLVM. Many of the ideas used in this implementation are based on the following paper:
D. J. Kuck, R. H. Kuhn, D. A. Padua, B. Leasure, and M. Wolfe (1981). DEPENDENCE GRAPHS AND COMPILER OPTIMIZATIONS.
This patch contains support for a basic DDGs containing only atomic nodes (one node for each instruction). The edges are two fold: def-use edges and memory-dependence edges.
The implementation takes a list of basic-blocks and only considers dependencies among instructions in those basic blocks. Any dependencies coming into or going out of instructions that do not belong to those basic blocks are ignored.
The algorithm for building the graph involves the following steps in order:
1. For each instruction in the range of basic blocks to consider, create an atomic node in the resulting graph.
2. For each node in the graph establish def-use edges to/from other nodes in the graph.
3. For each pair of nodes containing memory instruction(s) create memory edges between them. This part of the algorithm goes through the instructions in lexicographical order and creates edges in reverse order if the sink of the dependence occurs before the source of it.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur, fhahn, myhsu
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D65350
llvm-svn: 372162
Summary:
When inserting a Def, the current algorithm is walking edges backward
and inserting new Phis where needed. There may be additional Phis needed
in the IDF of the newly inserted Def and Phis.
Adding Phis in the IDF of the Def was added ina previous patch, but we
may also need other Phis in the IDF of the newly added Phis.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67637
llvm-svn: 372138
Summary:
Regularly when moving an instruction that may not read or write memory,
the instruction is not modelled in MSSA, so not action is necessary.
For a non-conventional AA pipeline, MSSA needs to explicitly check when
creating accesses, so as to not model instructions that may not read and
write memory.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67562
llvm-svn: 372137
We were failing to compute trip counts (both exact and maximum) for any loop which involved a comparison against either an umin or smin. It looks like this simply got missed when we added smin/umin to SCEV. (Note: umin was submitted separately earlier today. Turned out two folks hit this at the same time.)
Differential Revision: https://reviews.llvm.org/D67514
llvm-svn: 371776
Expanding the folding of `nearbyint()`, `rint()` and `trunc()` to library
functions, in addition to the current support for intrinsics.
Differential revision: https://reviews.llvm.org/D67468
llvm-svn: 371774
This patch adds support for SCEVUMinExpr to getRangeRef,
similar to the support for SCEVUMaxExpr.
Reviewers: sanjoy.google, efriedma, reames, nikic
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D67177
llvm-svn: 371768
Implement a TODO from rL371452, and handle loop invariant addresses in predicated blocks. If we can prove that the load is safe to speculate into the header, then we can avoid using a masked.load in favour of a normal load.
This is mostly about vectorization robustness. In the common case, it's generally expected that LICM/LoadStorePromotion would have eliminated such loads entirely.
Differential Revision: https://reviews.llvm.org/D67372
llvm-svn: 371745
Folding for fma/fmuladd was added here:
rL202914
...and as seen in existing/unchanged tests, that works to propagate NaN
if it's already an input, but we should fold an fma() that creates NaN too.
From IEEE-754-2008 7.2 "Invalid Operation", there are 2 clauses that apply
to fma, so I added tests for those patterns:
c) fusedMultiplyAdd: fusedMultiplyAdd(0, ∞, c) or fusedMultiplyAdd(∞, 0, c)
unless c is a quiet NaN; if c is a quiet NaN then it is implementation
defined whether the invalid operation exception is signaled
d) addition or subtraction or fusedMultiplyAdd: magnitude subtraction of
infinities, such as: addition(+∞, −∞)
Differential Revision: https://reviews.llvm.org/D67446
llvm-svn: 371735
Summary:
I don't have a direct motivational case for this,
but it would be good to have this for completeness/symmetry.
This pattern is basically the motivational pattern from
https://bugs.llvm.org/show_bug.cgi?id=43251
but with different predicate that requires that the offset is non-zero.
The completeness bit comes from the fact that a similar pattern (offset != zero)
will be needed for https://bugs.llvm.org/show_bug.cgi?id=43259,
so it'd seem to be good to not overlook very similar patterns..
Proofs: https://rise4fun.com/Alive/21b
Also, there is something odd with `isKnownNonZero()`, if the non-zero
knowledge was specified as an assumption, it didn't pick it up (PR43267)
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67411
llvm-svn: 371718
When possible, replace calls to library routines on the host with equivalent
ones in LLVM.
Differential revision: https://reviews.llvm.org/D67459
llvm-svn: 371677
This was actually the original intention in D67332,
but i messed up and forgot about it.
This patch was originally part of D67411, but precommitting this.
llvm-svn: 371630
Configure TLI to say that r600/amdgpu does not have any library
functions, such that InstCombine does not do anything like turn sin/cos
into the library function @tan with sufficient fast math flags.
Differential Revision: https://reviews.llvm.org/D67406
Change-Id: I02f907d3e64832117ea9800e9f9285282856e5df
llvm-svn: 371592
Summary:
Do not model debuginfo intrinsics in MemorySSA.
Regularly these are non-memory modifying instructions. With -disable-basicaa, they were being modelled as Defs.
Reviewers: george.burgess.iv
Subscribers: aprantl, Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67307
llvm-svn: 371565
Expose a utility function so that all places which want to suppress speculation (when otherwise legal) due to ordering and/or sanitizer interaction can do so.
llvm-svn: 371556
Since NaN is very rare in normal programs, so the probability for floating point unordered comparison should be extremely small. Current probability is 3/8, it is too large, this patch changes it to a tiny number.
Differential Revision: https://reviews.llvm.org/D65303
llvm-svn: 371541
Summary:
This is motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
In this particular case, given
```
char* test(char& base, unsigned long offset) {
return &base + offset;
}
```
it will end up producing something like
https://godbolt.org/z/LK5-iH
which after optimizations reduces down to roughly
```
define i1 @t0(i8* nonnull %base, i64 %offset) {
%base_int = ptrtoint i8* %base to i64
%adjusted = add i64 %base_int, %offset
%non_null_after_adjustment = icmp ne i64 %adjusted, 0
%no_overflow_during_adjustment = icmp uge i64 %adjusted, %base_int
%res = and i1 %non_null_after_adjustment, %no_overflow_during_adjustment
ret i1 %res
}
```
Without D67122 there was no `%non_null_after_adjustment`,
and in this particular case we can get rid of the overhead:
Here we add some offset to a non-null pointer,
and check that the result does not overflow and is not a null pointer.
But since the base pointer is already non-null, and we check for overflow,
that overflow check will already catch the null pointer,
so the separate null check is redundant and can be dropped.
Alive proofs:
https://rise4fun.com/Alive/WRzq
There are more patterns of "unsigned-add-with-overflow", they are not handled here,
but this is the main pattern, that we currently consider canonical,
so it makes sense to handle it.
https://bugs.llvm.org/show_bug.cgi?id=43246
Reviewers: spatel, nikic, vsk
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits, reames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67332
llvm-svn: 371349
Summary:
Add an intrinsic that takes 2 unsigned integers with
the scale of them provided as the third argument and
performs fixed point multiplication on them. The
result is saturated and clamped between the largest and
smallest representable values of the first 2 operands.
This is a part of implementing fixed point arithmetic
in clang where some of the more complex operations
will be implemented as intrinsics.
Patch by: leonardchan, bjope
Reviewers: RKSimon, craig.topper, bevinh, leonardchan, lebedev.ri, spatel
Reviewed By: leonardchan
Subscribers: ychen, wuzish, nemanjai, MaskRay, jsji, jdoerfert, Ka-Ka, hiraditya, rjmccall, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57836
llvm-svn: 371308
This addresses the issue mentioned on D19867. When we simplify
with.overflow instructions in CVP, we leave behind extractvalue
of insertvalue sequences that LVI no longer understands. This
means that we can not simplify any instructions based on the
with.overflow anymore (until some over pass like InstCombine
cleans them up).
This patch extends LVI extractvalue handling by calling
SimplifyExtractValueInst (which doesn't do anything more than
constant folding + looking through insertvalue) and using the block
value of the simplification.
A possible alternative would be to do something similar to
SimplifyIndVars, where we instead directly try to replace
extractvalue users of the with.overflow. This would need some
additional structural changes to CVP, as it's currently not legal
to remove anything but the current instruction -- we'd have to
introduce a worklist with instructions scheduled for deletion or similar.
Differential Revision: https://reviews.llvm.org/D67035
llvm-svn: 371306
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Summary:
I'm not planning to check this in at the moment, but feedback is very welcome, in particular how this affects performance.
The feedback obtains here will guide the next steps towards enabling this.
This patch enables the use of MemorySSA in the loop pass manager.
Passes that currently use MemorySSA:
- EarlyCSE
Passes that use MemorySSA after this patch:
- EarlyCSE
- LICM
- SimpleLoopUnswitch
Loop passes that update MemorySSA (and do not use it yet, but could use it after this patch):
- LoopInstSimplify
- LoopSimplifyCFG
- LoopUnswitch
- LoopRotate
- LoopSimplify
- LCSSA
Loop passes that do *not* update MemorySSA:
- IndVarSimplify
- LoopDelete
- LoopIdiom
- LoopSink
- LoopUnroll
- LoopInterchange
- LoopUnrollAndJam
- LoopVectorize
- LoopReroll
- IRCE
Reviewers: chandlerc, george.burgess.iv, davide, sanjoy, gberry
Subscribers: jlebar, Prazek, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58311
llvm-svn: 370384
Summary:
Now that with D65143/D65144 we've produce `@llvm.umul.with.overflow`,
and with D65147 we've flattened the CFG, we now can see that
the guard may have been there to prevent division by zero is redundant.
We can simply drop it:
```
----------------------------------------
Name: no overflow or zero
%iszero = icmp eq i4 %y, 0
%umul = smul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%umul.ov.not = xor %umul.ov, -1
%retval.0 = or i1 %iszero, %umul.ov.not
ret i1 %retval.0
=>
%iszero = icmp eq i4 %y, 0
%umul = smul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%umul.ov.not = xor %umul.ov, -1
%retval.0 = or i1 %iszero, %umul.ov.not
ret i1 %umul.ov.not
Done: 1
Optimization is correct!
```
Note that this is inverted from what we have in a previous patch,
here we are looking for the inverted overflow bit.
And that inversion is kinda problematic - given this particular
pattern we neither hoist that `not` closer to `ret` (then the pattern
would have been identical to the one without inversion,
and would have been handled by the previous patch), neither
do the opposite transform. But regardless, we should handle this too.
I've filled [[ https://bugs.llvm.org/show_bug.cgi?id=42720 | PR42720 ]].
Reviewers: nikic, spatel, xbolva00, RKSimon
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65151
llvm-svn: 370351
Summary:
Now that with D65143/D65144 we've produce `@llvm.umul.with.overflow`,
and with D65147 we've flattened the CFG, we now can see that
the guard may have been there to prevent division by zero is redundant.
We can simply drop it:
```
----------------------------------------
Name: no overflow and not zero
%iszero = icmp ne i4 %y, 0
%umul = umul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%retval.0 = and i1 %iszero, %umul.ov
ret i1 %retval.0
=>
%iszero = icmp ne i4 %y, 0
%umul = umul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%retval.0 = and i1 %iszero, %umul.ov
ret %umul.ov
Done: 1
Optimization is correct!
```
Reviewers: nikic, spatel, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65150
llvm-svn: 370350
The code we had isSafeToLoadUnconditionally was blatantly wrong. This function takes a "Size" argument which is supposed to describe the span loaded from. Instead, the code use the size of the pointer passed (which may be unrelated!) and only checks that span. For any Size > LoadSize, this can and does lead to miscompiles.
Worse, the generic code just a few lines above correctly handles the cases which *are* valid. So, let's delete said code.
Removing this code revealed two issues:
1) As noted by jdoerfert the removed code incorrectly handled external globals. The test update in SROA is to stop testing incorrect behavior.
2) SROA was confusing bytes and bits, but this wasn't obvious as the Size parameter was being essentially ignored anyway. Fixed.
Differential Revision: https://reviews.llvm.org/D66778
llvm-svn: 370102
Summary:
We already use the fact that an object with known size X does not alias
another objection of size Y > X before. With this commit, we use
dereferenceability information to determine a lower bound for Y and not
only rely on the user provided query size.
The result for @global_and_deref_arg_2() and @local_and_deref_ret_2()
in test/Analysis/BasicAA/dereferenceable.ll improved with this patch.
Reviewers: asbirlea, chandlerc, hfinkel, sanjoy
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66157
llvm-svn: 369786
Given an instruction I, the MustBeExecutedContextExplorer allows to
easily traverse instructions that are guaranteed to be executed whenever
I is. For now, these instruction have to be statically "after" I, in
the same or different basic blocks.
This patch also adds a pass which prints the must-be-executed-context
for each instruction in a module. It is used to test the
MustBeExecutedContextExplorer, for now on the examples given in the
class comment of the MustBeExecutedIterator.
Differential Revision: https://reviews.llvm.org/D65186
llvm-svn: 369765
I noticed another instance of the issue where references to aliases were
being replaced with aliasees, this time in InstCombine. In the instance that
I saw it turned out to be only a QoI issue (a symbol ended up being missing
from the symbol table due to the last reference to the alias being removed,
preventing HWASAN from symbolizing a global reference), but it could easily
have manifested as incorrect behaviour.
Since this is the third such issue encountered (previously: D65118, D65314)
it seems to be time to address this common error/QoI issue once and for all
and make the strip* family of functions not look through aliases.
Includes a test for the specific issue that I saw, but no doubt there are
other similar bugs fixed here.
As with D65118 this has been tested to make sure that the optimization isn't
load bearing. I built Clang, Chromium for Linux, Android and Windows as well
as the test-suite and there were no size regressions.
Differential Revision: https://reviews.llvm.org/D66606
llvm-svn: 369697
Summary:
Add a flag to the FunctionToLoopAdaptor that allows enabling MemorySSA only for the loop pass managers that are known to preserve it.
If an LPM is known to have only loop transforms that *all* preserve MemorySSA, then use MemorySSA if `EnableMSSALoopDependency` is set.
If an LPM has loop passes that do not preserve MemorySSA, then the flag passed is `false`, regardless of the value of `EnableMSSALoopDependency`.
When using a custom loop pass pipeline via `passes=...`, use keyword `loop` vs `loop-mssa` to use MemorySSA in that LPM. If a loop that does not preserve MemorySSA is added while using the `loop-mssa` keyword, that's an error.
Add the new `loop-mssa` keyword to a few tests where a difference occurs when enabling MemorySSA.
Reviewers: chandlerc
Subscribers: mehdi_amini, Prazek, george.burgess.iv, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66376
llvm-svn: 369548
Summary:
When inserting a new Def, and inserting Phis in the IDF when needed,
also mark the already existing Phis in the IDF as non-optimized, since
these may need fixing as well.
In the test attached, there is a Phi in the IDF that happens to be
trivial, and is wrongfully removed by the call to getLastDef that
follows. This is a valid situation and the existing IDF Phis need to
marked as "may need fixing" as well.
Resolves PR43044.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66495
llvm-svn: 369464
Summary:
CaptureTracker subclasses might have better dereferenceability
information which allows null pointer checks to be no-capturing.
The first user will be D59922.
Reviewers: sanjoy, hfinkel, aykevl, sstefan1, uenoku, xbolva00
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66371
llvm-svn: 369305
Summary:
Simplify the API using Optional<> and address comments in
https://reviews.llvm.org/D66165
Reviewers: vitalybuka
Subscribers: hiraditya, llvm-commits, ostannard, pcc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66317
llvm-svn: 369300
Summary:
When inserting uses from outside the MemorySSA creation, we don't
normally need to rename uses, based on the assumption that there will be
no inserted Phis (if Def existed that required a Phi, that Phi already
exists). However, when dealing with unreachable blocks, MemorySSA will
optimize away Phis whose incoming blocks are unreachable, and these Phis end
up being re-added when inserting a Use.
There are two potential solutions here:
1. Analyze the inserted Phis and clean them up if they are unneeded
(current method for cleaning up trivial phis does not cover this)
2. Leave the Phi in place and rename uses, the same way as whe inserting
defs.
This patch use approach 2.
Resolves first test in PR42940.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66033
llvm-svn: 369291
Summary:
Before we required the comparison against null to be "canonical", hence
null to be operand #1. This patch allows null to be in either operand,
similar to the handling of loaded globals that follows.
Reviewers: sanjoy, hfinkel, aykevl, sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66321
llvm-svn: 369158
If they're left in the cache then they can't be removed efficiently when the
cache is notified to unlink a @llvm.assume call, and that can lead to values
from different functions entirely remaining there.
llvm-svn: 369091
Summary:
Currently we fail to compute known bits for recurrences where the
first incoming value is the start value of the recurrence.
Instead of exiting the loop when the first incoming value is not
the step of the recurrence, continue to check the second incoming
value.
The original code uses a loop to handle both cases, but incorrectly
exits instead of continuing.
Reviewers: lebedev.ri, spatel, nikic
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66216
llvm-svn: 369088
The verification I added has overly restrictive asserts.
Unreachable blocks can have any incoming value in practice, after an
update due to a "replaceAllUses" call when the repalced entry is
LiveOnEntry.
llvm-svn: 369050
For indirect call sites having a small set of possible callees,
!callees metadata can be used to indicate what those callees are.
This patch updates the call graph and lazy call graph analyses so
that they consider this metadata when encountering call sites. For
the call graph, it adds a new external call graph node to the graph
for each unique !callees metadata node. A call graph edge connects
an indirect call site with the external node associated with the
!callees metadata that is attached to it. And there is an edge from
this external node to each of the callees indicated by the metadata.
Similarly, for the lazy call graph, the patch adds Ref edges from a
caller to the possible callees indicated by the metadata.
The primary purpose of the patch is to facilitate iterating over the
functions in a module such that all of the callees indicated by a
given !callees metadata node will be visited prior to the functions
containing call sites annotated by that node. This property is
required by optimizations performing a bottom-up traversal of the
SCC DAG. For example, the inliner can be made to inline through an
indirect call. If the call site is annotated with !callees metadata,
this patch ensures that the inliner will have visited all of the
callees prior to the caller, allowing it to reliably compute the
cost of inlining one or more of the potential callees.
Original patch by @mssimpso. I've made some small changes to get it
to apply, build, and pass tests on the top of tree, as well as
some minor tweaks to formatting and functionality.
Subscribers: mehdi_amini, hiraditya, llvm-commits, mssimpso
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D39339
llvm-svn: 369025
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Some uses of getArgumentAliasingToReturnedPointer and
isIntrinsicReturningPointerAliasingArgumentWithoutCapturing require the
calls/intrinsics to preserve the nullness of the argument.
For alias analysis, the nullness property does not really come into
play.
This patch explicitly sets it to true. In D61669, the alias analysis
uses will be switched to not require preserving nullness.
Reviewers: nlopes, efriedma, hfinkel, sanjoy, aqjune, jdoerfert
Reviewed By: jdoerfert
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64150
llvm-svn: 368993
Nikita Popov