In getMemcpyLoadsAndStores(), a memcpy where the source is a zero constant is expanded to a MemOp::Set instead of a MemOp::Copy, even when the memcpy is volatile.
This is incorrect.
The fix is to add a check for volatile, and expand to MemOp::Copy in the volatile case.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D87134
The post-index matcher, before it queries the target legality, walks uses
of some instructions which in pathological cases can be massive. Since
no targets actually support indexed loads yet, disable this to stop wasting
compile time on something which is going to fail anyway.
Previously SDNodeFlags::instersectWith(Flags) would do nothing if Flags was
in an undefined state, which is very bad given that this is the default when
getNode() is called without passing an explicit SDNodeFlags argument.
This meant that if an already existing and reused node had a flag which the
second caller to getNode() did not set, that flag would remain uncleared.
This was exposed by https://bugs.llvm.org/show_bug.cgi?id=47092, where an NSW
flag was incorrectly set on an add instruction (which did in fact overflow in
one of the two original contexts), so when SystemZElimCompare removed the
compare with 0 trusting that flag, wrong-code resulted.
There is more that needs to be done in this area as discussed here:
Differential Revision: https://reviews.llvm.org/D86871
Review: Ulrich Weigand, Sanjay Patel
Reduce to forward declaration, add the Register.h include that we still needed, move CCState::ensureMaxAlignment into CallingConvLower.cpp as it was the only function that needed the full definition of MachineFunction.
Fix a few implicit dependencies further down.
I have fixed up some more ElementCount/TypeSize related warnings in
the following tests:
CodeGen/AArch64/sve-split-extract-elt.ll
CodeGen/AArch64/sve-split-insert-elt.ll
In SelectionDAG::CreateStackTemporary we were relying upon the implicit
cast from TypeSize -> uint64_t when calling MachineFrameInfo::CreateStackObject.
I've fixed this by passing in the known minimum size instead, which I
believe is fine because the associated stack id indicates whether this
is a scalable object or not.
I've also fixed up a case in TargetLowering::SimplifyDemandedBits when
extracting a vector element from a scalable vector. The result is a scalar,
hence it wasn't caught at the start of the function. If the vector is
scalable we just bail out for now.
Differential Revision: https://reviews.llvm.org/D86431
- When an operand is changed into an immediate value or like, ensure their
target flags being cleared or set properly.
Differential Revision: https://reviews.llvm.org/D87109
This hashing scheme has been useful out of tree, and I want to start
experimenting with it. Specifically I want to experiment on the
MIRVRegNamer, MIRCanononicalizer, and eventually the MachineOutliner.
This diff is a first step, that optionally brings stable hashing to the
MIRVRegNamer (and as a result, the MIRCanonicalizer). We've tested this
hashing scheme on a lot of MachineOperand types that llvm::hash_value
can not handle in a stable manner.
This stable hashing was also the basis for
"Global Machine Outliner for ThinLTO" in EuroLLVM 2020
http://llvm.org/devmtg/2020-04/talks.html#TechTalk_58
Credits: Kyungwoo Lee, Nikolai Tillmann
Differential Revision: https://reviews.llvm.org/D86952
Use forward declarations and move the include down to dependent files that actually use it.
This also exposes a number of implicit dependencies on KnownBits.h
This helps SelectionDAGBuilder recognize the splat can be used as a uniform base.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D86371
After computing dependence, we check if it is safe to hoist by
identifying if it clobbers any liveIns in the sibling block (NullSucc).
This check is moved to its own function which will be used in the
soon-to-be modified dependence checking algorithm for implicit null
checks pass.
Tests-Run: lit tests on X86/implicit-*
Separated out some checks in isSuitableMemoryOp and added comments
explaining why some of those checks are done.
Tests-Run:X86 implicit null checks tests.
When lowering fixed length vector operations for SVE the subvector
operations are used extensively to marshall data between scalable
and fixed-length vectors. This means that sequences like:
extract_subvec(binop(insert_subvec(a), insert_subvec(b)))
are very common. DAGCombine only checks if the resulting binop is
legal or can be custom lowered when undoing such sequences. When
it's custom lowering that is introducing them the result is an
infinite legalise->combine->legalise loop.
This patch extends the isOperationLegalOr... functions to include
a "LegalOnly" parameter to restrict the check to legal operations
only. Although isOperationLegal could be used it's common for
the affected code paths to be visited pre and post legalisation,
so the extra parameter keeps the code tidy.
Differential Revision: https://reviews.llvm.org/D86450
Unwinders may only preserve the lower 64bits of Neon and SVE registers,
as only the registers in the base ABI are guaranteed to be preserved
over the exception edge. The caller will need to preserve additional
registers for when the call throws an exception and the unwinder has
tried to recover state.
For e.g.
svint32_t bar(svint32_t);
svint32_t foo(svint32_t x, bool *err) {
try { bar(x); } catch (...) { *err = true; }
return x;
}
`z0` needs to be spilled before the call to `bar(x)` and reloaded before
returning from foo, as the exception handler may have clobbered z0.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84737
As stated in section 6.1.1.2, DWARFv5, p. 142,
| The last entry for each name is followed by a zero byte that
| terminates the list. There may be gaps between the lists.
The patch changes emitting a 4-byte zero value to a 1-byte one, which
effectively removes the gap between entry lists, and thus saves
approximately 3 bytes per name; the calculation is not exact because
the total size of the table is aligned to 4.
Differential Revision: https://reviews.llvm.org/D86927
The member is not in use; the unit length for the table is emitted as
a difference between two labels. Moreover, the type of the member might
be misleading, because for DWARF64 the field should be 64 bit long.
Differential Revision: https://reviews.llvm.org/D86912
Previously if the source match we asserted that the destination
matched. But GPR <-> mask register copies on X86 can violate this
since we use the same K-registers for multiple sizes.
Fixes this ISPC issue https://github.com/ispc/ispc/issues/1851
Differential Revision: https://reviews.llvm.org/D86507
This is needed for an upcoming change to how we translate conditional branches
which might generate these.
Differential Revision: https://reviews.llvm.org/D86383
I have fixed up a number of warnings resulting from TypeSize -> uint64_t
casts and calling getVectorNumElements() on scalable vector types. I
think most of the changes are fairly trivial except for those in
DAGTypeLegalizer::SplitVecRes_MLOAD I've tried to ensure we create
the MachineMemoryOperands in a sensible way for scalable vectors.
I have added a CHECK line to the following test:
CodeGen/AArch64/sve-split-load.ll
that ensures no new warnings are added.
Differential Revision: https://reviews.llvm.org/D86697
fabs and fneg share a common transformation:
(fneg (bitconvert x)) -> (bitconvert (xor x sign))
(fabs (bitconvert x)) -> (bitconvert (and x ~sign))
This patch separate the code into a single method.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86862
I tried to fix this in:
rG716e35a0cf53
...but that patch depends on the order that we encounter the
magic "x/sqrt(x)" expression in the combiner's worklist.
This patch should improve that by waiting until we walk the
user list to decide if there's a use to skip.
The AArch64 test reveals another (existing) ordering problem
though - we may try to create an estimate for plain sqrt(x)
before we see that it is part of a 1/sqrt(x) expression.
In general, we probably want to try the multi-use reciprocal
transform before sqrt transforms, but x/sqrt(x) is a special-case
because that will always reduce to plain sqrt(x) or an estimate.
The AArch64 tests show that the transform is limited by TLI
hook to patterns where there are 3 or more uses of the divisor.
So this change can result in an extra division compared to
what we had, but that's the intended behvior based on the
current setting of that hook.
Current `v:t = zext(setcc x,y,cc)` will be transformed to `select x, y, 1:t, 0:t, cc`. It misses some opportunities if x's type size is less than `t`'s size. This patch enhances the above transformation.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86687
There's a special case in hasAttribute for None when pImpl is null. If pImpl is not null we dispatch to pImpl->hasAttribute which will always return false for Attribute::None.
So if we just want to check for None its sufficient to just check that pImpl is null. Which can even be done inline.
This patch adds a helper for that case which I hope will speed up our getSubtargetImpl implementations.
Differential Revision: https://reviews.llvm.org/D86744
We introduce a codegen optimization pass which splits functions into hot and cold
parts. This pass leverages the basic block sections feature recently
introduced in LLVM from the Propeller project. The pass targets
functions with profile coverage, identifies cold blocks and moves them
to a separate section. The linker groups all cold blocks across
functions together, decreasing fragmentation and improving icache and
itlb utilization.
We evaluated the Machine Function Splitter pass on clang bootstrap and
SPECInt 2017.
For clang bootstrap we observe a mean 2.33% runtime improvement with a
~32% reduction in itlb and stlb misses. Additionally, L1 icache misses
reduced by 9.5% while L2 instruction misses reduced by 20%.
For SPECInt we report the change in IntRate the C/C++
benchmarks. All benchmarks apart from mcf and x264 improve, on average
by 0.6% with the max for deepsjeng at 1.6%.
Benchmark % Change
500.perlbench_r 0.78
502.gcc_r 0.82
505.mcf_r -0.30
520.omnetpp_r 0.18
523.xalancbmk_r 0.37
525.x264_r -0.46
531.deepsjeng_r 1.61
541.leela_r 0.83
557.xz_r 0.15
Differential Revision: https://reviews.llvm.org/D85368
There is a subtle problem with new statepoint lowering scheme
when base and pointers are the same (see PR46917 for more context):
%1 = STATEPOINT ... %0, %0(tied-def 0)...
if, for some reason, register allocator desides to put two instances
of %0 into two different objects (registers or spill slots), we may
end up with
$reg3 = STATEPOINT ... $reg2, $reg1(tied-def 0)...
and nothing will prevent later passes to sink uses of $reg2 below
statepoint, which is incorrect.
As a short term solution, always put base pointers on stack during
lowering.
A longer term solution may be to rework MIR statepoint format to
avoid GC pointer duplication in statepoint argument list.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D86712
With gcc 6.3.0, I hit the following compilation error:
../lib/CodeGen/GlobalISel/Combiner.cpp: In member function
‘bool llvm::Combiner::combineMachineInstrs(llvm::MachineFunction&,
llvm::GISelCSEInfo*)’:
../lib/CodeGen/GlobalISel/Combiner.cpp:156:54: error: suggest parentheses
around ‘&&’ within ‘||’ [-Werror=parentheses]
assert(!CSEInfo || !errorToBool(CSEInfo->verify()) &&
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
"CSEInfo is not consistent. Likely missing calls to "
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"observer on mutations");
Fix the code as suggested by the compiler.
This is the follow up patch for https://reviews.llvm.org/D86183 as we miss to delete the node if NegX == NegY, which has use after we create the node.
```
if (NegX && (CostX <= CostY)) {
Cost = std::min(CostX, CostZ);
RemoveDeadNode(NegY);
return DAG.getNode(Opcode, DL, VT, NegX, Y, NegZ, Flags); #<-- NegY is used here if NegY == NegX.
}
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86689
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
Original D81646 had check for tied regs in foldPatchpoint().
Due to unfortunate miscommunication with review comments and
adressing some comments post commit, it turned into assertion.
We had an offline talk and agreed that with current implementation
this path is possible, so I'm changing it back to check.
Note that this is workaround until ussues described in PR46917 are
resolved.
Remove the code that tried to look for reduction patterns, since the
vectorizer and isel can now produce predicated arithmetic instructios
within the loop body. This has required some reorganisation and fixes
around live-out and predication checks, as well as looking for cases
where an input/output is initialised to zero.
Differential Revision: https://reviews.llvm.org/D86613
It's possible to have a single virtual register def with a subreg
index that would pass the previous check, but it's not possible to
have a subregister def in SSA.
This is in preparation for adding stricter checks for SSA MIR.
https://reviews.llvm.org/D83833
Patch adds two new GICombinerRules for G_SELECT. The rules include:
combining selects with undef comparisons into their first selectee value,
and to combine away selects with constant comparisons. Patch additionally
adds a new combiner test for the AArch64 target to test these new G_SELECT
combiner rules and the existing select_same_val combiner rule.
Patch by mkitzan
https://reviews.llvm.org/D86676
Sometimes we can have the following code
x:gpr(s32) = G_OP
Say we build G_OP2 to the same x and then delete the previous instruction. Using something like
Register X = ...;
auto NewMIB = CSEBuilder.buildOp2(X, ... args);
Currently there's a mismatch in how NewMIB is profiled and inserted into the CSEMap (ie it doesn't consider register bank/register class along with type).Unify the profiling by refactoring and calling the common method.
This was found by turning on the CSEInfo::verify in at the end of each of our GISel passes which turns inconsistent state/non determinism in CSEing into crashes which likely usually indicates missing calls to Observer on mutations (the most common case). Here non determinism usually means not cseing sometimes, but almost never about producing incorrect code.
Also this patch adds this verification at the end of the combiners as well.
When joining the legal parts of vector arguments into its original value
during the lower of Formal Arguments in SelectionDAGBuilder, the Calling
Convention information was not being propagated for the handling of each
individual parts. The same did not happen when lowering calls, causing a
mismatch.
This patch fixes the issue by properly propagating the Calling
Convention details.
This fixes Bugzilla #47001.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86715
This is the first of a set of DAGCombiner changes enabling strictfp
optimizations. I want to test to waters with this to make sure changes
like these are acceptable for the strictfp case- this particular change
should preserve exception ordering and result precision perfectly, and
many other possible changes appear to be able to as well.
Copied from regular fadd combines but modified to preserve ordering via
the chain, this change allows strict_fadd x, (fneg y) to become
struct_fsub x, y and strict_fadd (fneg x), y to become strict_fsub y, x.
Differential Revision: https://reviews.llvm.org/D85548
This reverts commit b9d977b0ca.
This cutoff is no longer required. The commit 34ffa7fc501 (D86153) introduces a
performance improvement which was tested against the motivating case for this
patch.
Discussed in differential revision: https://reviews.llvm.org/D86153
Almost NFC (see end).
The backwards scan in validThroughout significantly contributed to compile time
for a pathological case, causing the 'X86 Assembly Printer' pass to account for
roughly 70% of the run time. This patch guards the loop against running
unnecessarily, bringing the pass contribution down to 4%.
Almost NFC: There is a hack in validThroughout which promotes single constant
value DBG_VALUEs in the prologue to be live throughout the function. We're more
likely to hit this code path with this patch applied. Similarly to the parent
patches there is a small coverage change reported in the order of 10s of bytes.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86153
With the changes introduced in D86151 we can now check for single locations
which span multiple blocks for inlined scopes and blocks.
D86151 introduced the InstructionOrdering parameter, replacing a scan through
MBB instructions. The functionality to compare instruction positions across
blocks was add there, and this patch just removes the exit checks that were
previously (but no longer) required.
CTMark shows a geomean binary size reduction of 2.2% for RelWithDebInfo builds.
llvm-locstats (using D85636) shows a very small variable location coverage
change in 5 of 10 binaries, but just like in D86151 it is only in the order of
10s of bytes.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D86152
With this patch we're now accounting for two more cases which should be
considered 'valid throughout': First, where RangeEnd is ScopeEnd. Second, where
RangeEnd comes before ScopeEnd when including meta instructions, but are both
preceded by the same non-meta instruction.
CTMark shows a geomean binary size reduction of 1.5% for RelWithDebInfo builds.
`llvm-locstats` (using D85636) shows a very small variable location coverage
change in 2 of 10 binaries, but it is in the order of 10s of bytes which lines
up with my expectations.
I've added a test which checks both of these new cases. The first check in the
test isn't strictly necessary for this patch. But I'm not sure that it is
explicitly tested anywhere else, and is useful for the final patch in the
series.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86151
Group the map and methods used to query instruction ordering for trimVarLocs
(D82129) into a class. This will make it easier to reuse the functionality
upcoming patches.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86150
This patch adds type information for SVE ACLE vector types,
by describing them as vectors, with a lower bound of 0, and
an upper bound described by a DWARF expression using the
AArch64 Vector Granule register (VG), which contains the
runtime multiple of 64bit granules in an SVE vector.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86101
Fix the ARM backend's analyzeBranch so it doesn't ignore predicated
return instructions, and make the MachineVerifier rule more strict.
Differential Revision: https://reviews.llvm.org/D40061
AArch64, X86 and Mips currently directly consumes these and custom
lowering to produce a libcall, but really these should follow the
normal legalization process through the libcall/lower action.
Summary:
When looking for all reaching definitions, we sort basic blocks on dominance. When sorting looking for properlyDominates() handles the case A == B.
Authored by: pranavb
Differential Revision: https://reviews.llvm.org/D86661
We have a gap in our store merging capabilities for shift+truncate
patterns as discussed in:
https://llvm.org/PR46662
I generalized the code/comments for this function in earlier commits,
so we only need ease the type restriction and adjust the address/endian
checking to make this work.
AArch64 lets us switch endian to make sure that patterns are matched
either way.
Differential Revision: https://reviews.llvm.org/D86420
This produces less work for addressing mode matching. I think this is
safe since I don't think machine IR is supposed to give the same
aliasing properties as getelementptr in the IR.
Before calling target hook to determine if two loads/stores are clusterable,
we put them into different groups to avoid fake cluster due to dependency.
For now, we are putting the loads/stores into the same group if they have
the same predecessor. We assume that, if two loads/stores have the same
predecessor, it is likely that, they didn't have dependency for each other.
However, one SUnit might have several predecessors and for now, we just
pick up the first predecessor that has non-data/non-artificial dependency,
which is too arbitrary. And we are struggling to fix it.
So, I am proposing some better implementation.
1. Collect all the loads/stores that has memory info first to reduce the complexity.
2. Sort these loads/stores so that we can stop the seeking as early as possible.
3. For each load/store, seeking for the first non-dependency instruction with the
sorted order, and check if they can cluster or not.
Reviewed By: Jay Foad
Differential Revision: https://reviews.llvm.org/D85517
If the basic block of the instruction passed to getUniqueReachingMIDef
is a transitive predecessor of itself and has a definition of the
register, the function will return that definition even if it is after
the instruction given to the function. This patch stops the function
from scanning the instruction's basic block to prevent this.
Differential Revision: https://reviews.llvm.org/D86607
There are two ways .llvmbc can be produced:
* clang -c -fembed-bitcode=all (which also produces .llvmcmd)
* LTO backend: ld.lld -mllvm -lto-embed-bitcode or -plugin-opt=-lto-embed-bitcode
.llvmbc and .llvmcmd have the SHF_ALLOC flag, so they can be dropped by
--gc-sections.
This patch sets SectionKind::Metadata to drop the SHF_ALLOC flag. This
is conceptually correct: the two sections are not part of the process
image, so SHF_ALLOC is not appropriate.
`test/LTO/X86/embed-bitcode.ll`: changed `llvm-objcopy -O binary --only-section` to
`llvm-objcopy --dump-section`. `-O binary` does not dump non-SHF_ALLOC sections.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D86374
This adapts legalization of intrinsic get.active.lane.mask to the new semantics
as described in D86147. Because the second argument is now the loop tripcount,
we legalize this intrinsic to an 'icmp ULT' instead of an ULE when it was the
backedge-taken count.
Differential Revision: https://reviews.llvm.org/D86302
This patch adds the -Xclang option
"-fexperimental-debug-variable-locations" and same LLVM CodeGen option,
to pick which variable location tracking solution to use.
Right now all the switch does is pick which LiveDebugValues
implementation to use, the normal VarLoc one or the instruction
referencing one in rGae6f78824031. Over time, the aim is to add fragments
of support in aid of the value-tracking RFC:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139440.html
also controlled by this command line switch. That will slowly move
variable locations to be defined by an instruction calculating a value,
and a DBG_INSTR_REF instruction referring to that value. Thus, this is
going to grow into a "use the new kind of variable locations" switch,
rather than just "use the new LiveDebugValues implementation".
Differential Revision: https://reviews.llvm.org/D83048
The arm backend does not handle select/select_cc on vectors with scalar
conditions, preferring to expand them in codegenprepare instead. This
usually works except when optimizing for size, where the optsize check
would end up overruling the backend isSelectSupported check.
We could handle the selects in ISel too, but this seems like smaller
code than trying to splat the condition to all lanes.
Differential Revision: https://reviews.llvm.org/D86433
Also updates isConstOrConstSplatFP to allow the mul(A,-1) -> neg(A)
transformation when -1 is expressed as an ISD::SPLAT_VECTOR.
Differential Revision: https://reviews.llvm.org/D86415
Explicitly check that there is a local def prior to the given
instruction in getReachingLocalMIDef instead of just relying on
a nullptr return from getInstFromId.
With FMF ( "nsz" and " reassoc") fold X/Sqrt(X) to Sqrt(X).
This is done after targets have the chance to produce a
reciprocal sqrt estimate sequence because that expansion
is probably more efficient than an expansion of a
non-reciprocal sqrt. That is also why we deferred doing
this transform in IR (D85709).
Differential Revision: https://reviews.llvm.org/D86403
D77152 tried to do this but got it wrong in the shift-by-zero case.
D86430 reverted the wrong code. Reimplement the optimization with
different code depending on whether the shift amount is known to be
non-zero (modulo bitwidth).
This improves code quality for fshl tests on AMDGPU, which only has an
fshr instruction.
Differential Revision: https://reviews.llvm.org/D86438
shl ([sza]ext x, y) => zext (shl x, y).
Turns expensive 64 bit shifts into 32 bit if it does not overflow the
source type:
This is a port of an AMDGPU DAG combine added in
5fa289f0d8. InstCombine does this
already, but we need to do it again here to apply it to shifts
introduced for lowered getelementptrs. This will help matching
addressing modes that use 32-bit offsets in a future patch.
TableGen annoyingly assumes only a single match data operand, so
introduce a reusable struct. However, this still requires defining a
separate GIMatchData for every combine which is still annoying.
Adds a morally equivalent function to the existing
getShiftAmountTy. Without this, we would have to do try to repeatedly
query the legalizer info and guess at what type to use for the shift.
This is a fixup of commit 0819a6416f (D77152) which could
result in miscompiles. The miscompile could only happen for targets
where isOperationLegalOrCustom could return different values for
FSHL and FSHR.
The commit mentioned above added logic in expandFunnelShift to
convert between FSHL and FSHR by swapping direction of the
funnel shift. However, that transform is only legal if we know
that the shift count (modulo bitwidth) isn't zero.
Basically, since fshr(-1,0,0)==0 and fshl(-1,0,0)==-1 then doing a
rewrite such as fshr(X,Y,Z) => fshl(X,Y,0-Z) would be incorrect if
Z modulo bitwidth, could be zero.
```
$ ./alive-tv /tmp/test.ll
----------------------------------------
define i32 @src(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = fshl i32 %x, i32 %y, i32 %z
ret i32 %t0
}
=>
define i32 @tgt(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = sub i32 32, %z
%t1 = fshr i32 %x, i32 %y, i32 %t0
ret i32 %t1
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
i32 %x = #x00000000 (0)
i32 %y = #x00000400 (1024)
i32 %z = #x00000000 (0)
Source:
i32 %t0 = #x00000000 (0)
Target:
i32 %t0 = #x00000020 (32)
i32 %t1 = #x00000400 (1024)
Source value: #x00000000 (0)
Target value: #x00000400 (1024)
```
It could be possible to add back the transform, given that logic
is added to check that (Z % BW) can't be zero. Since there were
no test cases proving that such a transform actually would be useful
I decided to simply remove the faulty code in this patch.
Reviewed By: foad, lebedev.ri
Differential Revision: https://reviews.llvm.org/D86430
D70867 introduced support for expanding most ppc_fp128 operations. But
sitofp/uitofp is missing. This patch adds that after D81669.
Reviewed By: uweigand
Differntial Revision: https://reviews.llvm.org/D81918
The pattern matching does not account for truncating stores,
so it is unlikely to work at later stages. So we are likely
wasting compile-time with no hope of improvement by running
this later.
This should be NFC in terms of output because the endian
check further down would bail out too, but we are wasting
time by waiting to that point to give up. If we generalize
that function to deal with more than i8 types, we should
not have to deal with the degenerate case.
This patch imports the instruction-referencing implementation of
LiveDebugValues proposed here:
http://lists.llvm.org/pipermail/llvm-dev/2020-June/142368.html
The new implementation is unreachable in this patch, it's the next patch
that enables it behind a command line switch. Briefly, rather than
tracking variable locations by just their location as the 'VarLoc'
implementation does, this implementation does it by value:
* Each value defined in a function is numbered, and propagated through
dataflow,
* Each DBG_VALUE reads a machine value number from a machine location,
* Variable _values_ are propagated through dataflow,
* Variable values are translated back into locations, DBG_VALUEs
inserted to specify where those locations are.
The ultimate aim of this is to enable referring to variable values
throughout post-isel code, rather than locations. Those patches will
build on top of this new LiveDebugValues implementation in later patches
-- it can't be done with the VarLoc implementation as we don't have
value information, only locations.
Differential Revision: https://reviews.llvm.org/D83047
This patch renames the current LiveDebugValues class to "VarLocBasedLDV"
and removes the pass-registration code from it. It creates a separate
LiveDebugValues class that deals with pass registration and management,
that calls through to VarLocBasedLDV::ExtendRanges when
runOnMachineFunction is called. This is done through the "LDVImpl"
abstract class, so that a future patch can install the new
instruction-referencing LiveDebugValues implementation and have it
picked at runtime.
No functional change is intended, just shuffling responsibilities.
Differential Revision: https://reviews.llvm.org/D83046
This is a pure file move of LiveDebugValues.cpp ahead of the pass being
refactored, with an experimental new implementation to follow.
The motivation for these changes can be found here:
http://lists.llvm.org/pipermail/llvm-dev/2020-June/142368.html
And the other related changes can be found in the phabricator stack for
this revision:
Differential Revision: https://reviews.llvm.org/D83304
This patch adds support for representing Fortran `character(n)`.
Primarily patch is based out of D54114 with appropriate modifications.
Test case IR is generated using our downstream classic-flang. We're in process
of upstreaming flang PR's but classic-flang has dependencies on llvm, so
this has to get in first.
Patch includes functional test case for both IR and corresponding
dwarf, furthermore it has been manually tested as well using GDB.
Source snippet:
```
program assumedLength
call sub('Hello')
call sub('Goodbye')
contains
subroutine sub(string)
implicit none
character(len=*), intent(in) :: string
print *, string
end subroutine sub
end program assumedLength
```
GDB:
```
(gdb) ptype string
type = character (5)
(gdb) p string
$1 = 'Hello'
```
Reviewed By: aprantl, schweitz
Differential Revision: https://reviews.llvm.org/D86305
The register class is required for inserting PHIs, but the "current
virtual register" isn't actually used for anything, so let's remove it
while we're at it.
Differential Revision: https://reviews.llvm.org/D85602
Change-Id: I1e647f31570ef21a7ea8e20db3454178e98a6a8b
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
Both AfterPass and AfterPassInvalidated pass instrumentation
callbacks get additional parameter of type PreservedAnalyses.
This patch was created by @fedor.sergeev. I have just slightly
changed it.
Reviewers: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D81555
Known bits for G_ANYEXT was incorrectly using KnownBits::zext, causing
us to treat the high bits as zero even though they're (by definition)
unknown.
Differential Revision: https://reviews.llvm.org/D86323
Assuming this is used to split a memory access into smaller pieces,
the new access should still have the same aliasing properties as the
original memory access. As far as I can tell, this wasn't
intentionally dropped. It may be necessary to drop this if you are
moving the operand outside of the bounds of the original object in
such a way that it may alias another IR object, but I don't think any
of the existing users are doing this. Some of the uses widen into
unused alignment padding, which I think is OK.
The byte swapping, when dealing with 4 byte (float) FP constants
in DwarfExpression::addConstantFP, added in commit ef8992b9f0
was not correct. It always performed byte swapping using an
uint64_t value. When dealing with 4 byte values the 4 interesting
bytes ended up in the big end of the uint64_t, but later we emitted
the 4 bytes at the little end. So we ended up with zeroes being
emitted and faulty debug information.
This patch simplifies things a bit, IMHO. Using the APInt
representation throughout the function, instead of looking at
the internal representation using getRawBytes and without using
reinterpret_cast etc. And using API.byteSwap() should result in
correct byte swapping independent of APInt being 4 or 8 bytes.
Differential Revision: https://reviews.llvm.org/D86272
The check for the landingpad instructions was overly restrictive. In optimimized builds PHI nodes can appear
before the landingpad instructions, resulting in a fallback to SelectionDAG.
This change relaxes the check to allow PHI nodes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86141
This patch was reverted in 7c182663a8 due to some failures
observed on PCC based machines. Failures were due to Endianness issue and
long double representation issues.
Patch is revised to address Endianness issue. Furthermore, support
for emission of `DW_OP_implicit_value` for `long double` has been removed
(since it was unclean at the moment). Planning to handle this in
a clean way soon!
For more context, please refer to following review link.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
llvm is missing support for DW_OP_implicit_value operation.
DW_OP_implicit_value op is indispensable for cases such as
optimized out long double variables.
For intro refer: DWARFv5 Spec Pg: 40 2.6.1.1.4 Implicit Location Descriptions
Consider the following example:
```
int main() {
long double ld = 3.14;
printf("dummy\n");
ld *= ld;
return 0;
}
```
when compiled with tunk `clang` as
`clang test.c -g -O1` produces following location description
of variable `ld`:
```
DW_AT_location (0x00000000:
[0x0000000000201691, 0x000000000020169b): DW_OP_constu 0xc8f5c28f5c28f800, DW_OP_stack_value, DW_OP_piece 0x8, DW_OP_constu 0x4000, DW_OP_stack_value, DW_OP_bit_piece 0x10 0x40, DW_OP_stack_value)
DW_AT_name ("ld")
```
Here one may notice that this representation is incorrect(DWARF4
stack could only hold integers(and only up to the size of address)).
Here the variable size itself is `128` bit.
GDB and LLDB confirms this:
```
(gdb) p ld
$1 = <invalid float value>
(lldb) frame variable ld
(long double) ld = <extracting data from value failed>
```
GCC represents/uses DW_OP_implicit_value in these sort of situations.
Based on the discussion with Jakub Jelinek regarding GCC's motivation
for using this, I concluded that DW_OP_implicit_value is most appropriate
in this case.
Link: https://gcc.gnu.org/pipermail/gcc/2020-July/233057.html
GDB seems happy after this patch:(LLDB doesn't have support
for DW_OP_implicit_value)
```
(gdb) p ld
p ld
$1 = 3.14000000000000012434
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
If we have a mask, and a value x, where (x & mask) == x, we can drop the AND
and just use x.
This is about a 0.4% geomean code size improvement on CTMark at -O3 for AArch64.
In AArch64, this is most useful post-legalization. Patterns like this often
show up when legalizing s1s, which must be extended to larger types.
e.g.
```
%cmp:_(s32) = G_ICMP ...
%and:_(s32) = G_AND %cmp, 1
```
Since G_ICMP only produces a single bit, there's no reason to mask it with the
G_AND.
Differential Revision: https://reviews.llvm.org/D85463
In DAGTypeLegalizer::GenWidenVectorLoads the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the code in that
function to use TypeSize instead of unsigned for tracking the remaining
load amount. In addition, I've changed the load loop to use the new
IncrementPointer helper function for updating the addresses in each
iteration, since this handles scalable vector types.
Also, I've added report_fatal_errors in GenWidenVectorExtLoads,
TargetLowering::scalarizeVectorLoad and TargetLowering::scalarizeVectorStores,
since these functions currently use a sequence of element-by-element
scalar loads/stores. In a similar vein, I've also added a fatal error
report in FindMemType for the case when we decide to return the element
type for a scalable vector type.
I've added new tests in
CodeGen/AArch64/sve-split-load.ll
CodeGen/AArch64/sve-ld-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorLoads.
Differential Revision: https://reviews.llvm.org/D85909
It's annoying to have to maintain multiple, nearly identical chains of if
statements which all set the same attributes.
Add a helper function, `addFlagsUsingAttrFn` which performs the attribute
setting.
Then, use wrappers for that function in `lowerCall` and `setArgFlags`.
(Note that the flag-setting code in `setArgFlags` was missing the returned
attribute. There's no selection for this yet, so no test. It's an example of
the kind of thing this lets us avoid, though.)
Differential Revision: https://reviews.llvm.org/D86159
Similar to this commit:
faf8065a99
Testcase is pretty much the same as
test/CodeGen/AArch64/tailcall-explicit-sret.ll
Except it uses i64 (since we don't handle the i1024 return values yet), and
doesn't have indirect tail call testcases (because we can't translate those
yet).
Differential Revision: https://reviews.llvm.org/D86148
This is restricted to single use loads, which if we fold to sextloads we can
find more optimal addressing modes on AArch64.
This also fixes an overload the MachineFunction::getMachineMemOperand() method
which was incorrectly using the MF alignment instead of the MMO alignment.
Differential Revision: https://reviews.llvm.org/D85966
By detecting this sign extend pattern early, we can uncover opportunities for
more optimizations.
Differential Revision: https://reviews.llvm.org/D85965
We weren't looking through the parameters on calls at all.
E.g., say you had
```
declare i32 @zext(i32 zeroext %x)
...
%y = call i32 @zext(i32 %something)
...
```
At the point of the call, we wouldn't know that the %something should have the
zeroext attribute.
This sets flags in about the same way as
TargetLoweringBase::ArgListEntry::setAttributes.
Differential Revision: https://reviews.llvm.org/D86125
Theory was that we should never reach a non-type unit (eg: type in an
anonymous namespace) when we're already in the invalid "encountered an
address-use, so stop emitting types for now, until we throw out the
whole type tree to restart emitting in non-type unit" state. But that's
not the case (prior commit cleaned up one reason this wasn't exposed
sooner - but also makes it easier to test/demonstrate this issue)
This reads more like what you'd expect the DWARF to look like (from the
lexical order of C++ - template parameters come before members, etc),
and also happens to make it easier to tickle (& thus test) a bug related
to type units and Split DWARF I'm about to fix.
Some of the lower implementations were relying on this, however the
type was not set depending on which form .lower* helper form you were
using. For instance, if you used an unconditonal lower(), the type was
never set. Most of the lower actions do not benefit from a type
parameter, and just expand in terms of the original operation's types.
However, some lowerings could benefit from an additional type hint to
combine a promotion and an expansion. An example of this is for
add/sub sat. The DAG integer legalization tries to use smarter
expansions directly when promoting the integer type, and doesn't
always produce the same instruction with a wider type.
Treat this as an optional hint argument, that only means something for
specific lower actions. It may be useful to generalize this mechanism
to pass a full list of type indexes and desired types, but I haven't
run into a case like that yet.
The "isa" checks were less constrained because they allow
target constants, but the later matching code would bail
out on those anyway, so this should be slightly more
efficient.
(Forgot to land this a couple of weeks back.)
In a recent series of changes, I've introduced support for using the respective operand bundle kinds on the statepoint. At the moment, code supports either/or, but there's no need to keep the old support around. For the moment, I am simply changing the specification and verifier to require zero length argument sets in the intrinsic.
The intrinsic itself is experimental. Given that, there's no forward serialization needed. The in tree uses and generation have already been updated to use the new operand bundle based forms, the only folks broken by the change will be those with frontends generating statepoints directly and the updates should be easy.
Why not go ahead and just remove the arguments entirely? Well, I plan to. But while working on this I've found that almost all of the arguments to the statepoint can be expressed via operand bundles or attributes. Given that, I'm planning a radical simplification of the arguments and figured I'd do one update not several small ones.
Differential Revision: https://reviews.llvm.org/D80892
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
These should really match either G_BUILD_VECTOR or
G_BUILD_VECTOR_TRUNC, but there doesn't seem to be an existing
mechanism for matching alternative opcodes. There is GIM_SwitchOpcode,
but it seems to assume it's oly only used for matcher optimization.
I could also omit any opcode check and rely on the matcher directly
checking the opcode, but the table optimizer currently assumes there
has to be an opcode check.
Also doesn't try to handle undef elements like the DAG version.
Extend FixupStatepointCallerSaved pass with ability to spill
statepoint GC pointer arguments (optionally allowing them on CSRs).
Special handling is required for invoke statepoints, because at MI
level single landing pad may be shared by multiple statepoints, so
we must ensure we spill landing pad's live-ins into the same stack
slots.
Full statepoint refactoring change set is available at D81603.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D81647
This patch changes SplitVecOp_EXTRACT_VECTOR_ELT to work correctly
for scalable vectors and also fixes an a bug in DAGCombiner where
the scalable property is dropped in visitTRUNCATE when attempting
to fold an extract + a truncate.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85754
In DAGTypeLegalizer::GenWidenVectorStores the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the main loop in
that function to use TypeSize instead of unsigned for tracking the
remaining store amount and offset increment. In addition, I've changed
the loop to use the new IncrementPointer helper function for updating
the addresses in each iteration, since this handles scalable vector
types.
Whilst fixing this function I also fixed a minor issue in
IncrementPointer whereby we were not adding the no-unsigned-wrap flag
for the add instruction in the same way as the fixed width case does.
Also, I've added a report_fatal_error in GenWidenVectorTruncStores,
since this code currently uses a sequence of element-by-element scalar
stores.
I've added new tests in
CodeGen/AArch64/sve-intrinsics-stores.ll
CodeGen/AArch64/sve-st1-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorStores.
Differential Revision: https://reviews.llvm.org/D84937
In narrowExtractedVectorLoad there is an optimisation that tries to
combine extract_subvector with a narrowing vector load. At the moment
this produces warnings due to the incorrect calls to
getVectorNumElements() for scalable vector types. I've got this
working for scalable vectors too when the extract subvector index
is a multiple of the minimum number of elements. I have added a
new variant of the function:
MachineFunction::getMachineMemOperand
that copies an existing MachineMemOperand, but replaces the pointer
info with a null version since we cannot currently represent scaled
offsets.
I've added a new test for this particular case in:
CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D83950
This is mostly a straight port from SelectionDAG. We re-use the actual bit-test
analysis part from SwitchLoweringUtils, which was factored out earlier to
support jump-tables.
Differential Revision: https://reviews.llvm.org/D85233
In this patch I have fixed two issues:
1. Our SVE tuple get/set intrinsics were using the wrong constant type
for the index passed to EXTRACT_SUBVECTOR. I have fixed this by using the
function SelectionDAG::getVectorIdxConstant to create the value. Also, I
have updated the documentation for EXTRACT_SUBVECTOR describing what type
the constant index should be and we now enforce this when creating the
node.
2. The AArch64 backend was missing the appropriate patterns for
extracting certain subvectors (nxv4f16 and nxv2f32) from legal SVE types.
I have added them as part of this patch.
The only way that I could find to test the new patterns was to use the
SVE tuple get intrinsics, although I realise it looks a bit unusual.
Tests added here:
test/CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D85516
SUMMARY:
1. in the patch , remove setting storageclass in function .getXCOFFSection and construct function of class MCSectionXCOFF
there are
XCOFF::StorageMappingClass MappingClass;
XCOFF::SymbolType Type;
XCOFF::StorageClass StorageClass;
in the MCSectionXCOFF class,
these attribute only used in the XCOFFObjectWriter, (asm path do not need the StorageClass)
we need get the value of StorageClass, Type,MappingClass before we invoke the getXCOFFSection every time.
actually , we can get the StorageClass of the MCSectionXCOFF from it's delegated symbol.
2. we also change the oprand of branch instruction from symbol name to qualify symbol name.
for example change
bl .foo
extern .foo
to
bl .foo[PR]
extern .foo[PR]
3. and if there is reference indirect call a function bar.
we also add
extern .bar[PR]
Reviewers: Jason liu, Xiangling Liao
Differential Revision: https://reviews.llvm.org/D84765
This implements
```
(logic_op (op x...), (op y...)) -> (op (logic_op x, y))
```
when `op` is an extend, a shift, or an and.
This is similar to `DAGCombiner::hoistLogicOpWithSameOpcodeHands`
(with a bunch of missing cases, e.g. G_TRUNC, G_BITCAST, etc.)
This is implemented so it works both pre and post-legalization.
This also adds a general way to add a series of instructions in a combine.
(`applyBuildInstructionSteps`).
Differential Revision: https://reviews.llvm.org/D85050
Allow the GNU .debug_macro extension to be emitted for DWARF versions
earlier than 5. The extension is basically what became DWARF 5's format,
except that a DW_AT_GNU_macros attribute is emitted, and some entries
like the strx entries are missing. In this patch I emit GNU's indirect
entries, which are the same as DWARF 5's strp entries.
This patch adds the extension behind a hidden LLVM flag,
-use-gnu-debug-macro. I would later want to enable it by default when
tuning for GDB and targeting DWARF versions earlier than 5.
The size of a Clang 8.0 binary built with RelWithDebInfo and the flags
"-gdwarf-4 -fdebug-macro" reduces from 1533 MB to 1349 MB with
.debug_macro (compared to 1296 MB without -fdebug-macro).
Reviewed By: SouraVX, dblaikie
Differential Revision: https://reviews.llvm.org/D82975
Broken out from a review comment on D82975. This is an NFC expect for
that the Macinfo macro string is now emitted using a single emitBytes()
invocation, so it can be done using a single string directive.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D83557
This mirrors the support for the equivalent extracts. This also
creates a huge mess that would be greatly improved if we had any bit
operation combines.
When the result type of insertelement needs to be split,
SplitVecRes_INSERT_VECTOR_ELT will try to store the vector to a
stack temporary, store the element at the location of the stack
temporary plus the index, and reload the Lo/Hi parts.
This patch does the following to ensure this works for scalable vectors:
- Sets the StackID with getStackIDForScalableVectors() in CreateStackTemporary
- Adds an IsScalable flag to getMemBasePlusOffset() and scales the
offset by VScale when this is true
- Ensures the immediate is clamped correctly by clampDynamicVectorIndex
so that we don't try to use an out of range index
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D84874
Move the Dwarf version checks that determine if the .debug_macro section
should be emitted, into a DwarfDebug member. This is a preparatory
refactoring for allowing the GNU .debug_macro extension, which is a
precursor to the DWARF 5 format, to be emitted by LLVM for earlier DWARF
versions.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D82971
Changes the Offset arguments to both functions from int64_t to TypeSize
& updates all uses of the functions to create the offset using TypeSize::Fixed()
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85220
We skip debug instructions in RDA so we cannot attempt to look them
up in our instruction map without causing a crash. But some of the
methods select the last instruction in the block and this
instruction may be a debug instruction... So, use getLastNonDebugInstr
instead of calling back on a MachineBasicBlock.
MachineBasicBlock iterators have also been updated to use
instructionsWithoutDebug so we can avoid the manual checks for debug
instructions.
Differential Revision: https://reviews.llvm.org/D85658
Summary:
Use TE SMC instead of TC SMC in large code model mode,
so that large code model TOC entries could get placed after all
the small code model TOC entries, which reduces the chance of TOC overflow.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D85455
SplitKit forms invalid COPY subreg bundles without a leading
BUNDLE instruction. That manifests itself in post-RA scheduler
counting instruction and asserting on "Instruction count mismatch".
The bundle shall be undone by VirtRegRewriter::expandCopyBundle(),
but it does not because VirtRegRewriter::handleIdentityCopy() can
turn COPY bundle into a KILL bundle.
Process KILLs as well.
Differential Revision: https://reviews.llvm.org/D85484
This patch adds the missing information to the LF_BUILDINFO record, which allows for rebuilding a .CPP without any external dependency but the .OBJ itself (other than the compiler).
Some external tools that we are using (Recode, Live++) are extracting the information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO stores a full path to the compiler, the PWD (CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variables). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
X86 is the only user of this interface in tree. Previously the
X86 pass would loop over operands looking for one undef operand for
the pass to fix. But there could theoretically be multiple operands
to fix. So it makes more sense for the pass to do the looping and
ask the target if an operand needs to be fixed.
On the frontend side, this patch recovers AIX static init implementation to
use the linkage type and function names Clang chooses for sinit related function.
On the backend side, this patch sets correct linkage and function names on aliases
created for sinit/sterm functions.
Differential Revision: https://reviews.llvm.org/D84534
As noticed on D66004, scalarization of an expandload with a constant mask as a chain of irregular loads+inserts makes it tricky to optimize before lowering, resulting in difficulties in merging loads etc.
This patch instead scalarizes the expansion to a build_vector(load0, load1, undef, load2,....) style pattern and then performs a blend shuffle with the pass through vector. This allows us to more easily make use of all the build_vector combines, merging of consecutive loads etc.
Differential Revision: https://reviews.llvm.org/D85416
This also fixes the condition in the assertion in
DwarfCompileUnit::getLabelBegin() because it checked something unrelated
to the returned value.
Differential Revision: https://reviews.llvm.org/D85437
These aren't the canonical forms we'd get from InstCombine, but
we do have X86 tests for them. Recognizing them is pretty cheap.
While there make use of APInt:isSignedMinValue/isSignedMaxValue
instead of creating a new APInt to compare with. Also use
SelectionDAG::getAllOnesConstant helper to hide the all ones
APInt creation.
Follow-up to D82716 / rGea71ba11ab11
We do not have the fabs removal fold in IR yet for the case
where the sqrt operand is repeated, so that's another potential
improvement.
Simon Pilgrim