For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more efficient instruction selection if the bitmask is one consecutive sequence of set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit into the sign bit with one LSLS and change the condition query from NE/EQ to MI/PL (we could also implement this by shifting into the carry bit and branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two 16-bit instructions but can elide the CMP and doesn't require materializing a complex immediate, so is also a win.
llvm-svn: 281323
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more efficient instruction selection if the bitmask is one consecutive sequence of set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit into the sign bit with one LSLS and change the condition query from NE/EQ to MI/PL (we could also implement this by shifting into the carry bit and branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two 16-bit instructions but can elide the CMP and doesn't require materializing a complex immediate, so is also a win.
llvm-svn: 281215
The CMPZ #0 disappears during peepholing, leaving just a tADDi3, tADDi8 or t2ADDri. This avoids having to materialize the expensive negative constant in Thumb-1, and allows a shrinking from a 32-bit CMN to a 16-bit ADDS in Thumb-2.
llvm-svn: 281040
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
Summary: Thumb2 supports encoding immediates with specific patterns into mov.w by splatting the low 8 bits into other bytes.
I'm resubmitting this patch. The test case in the original commit
r277610 does not specify triple, so builds with differnt default triple
will have different output.
This patch fixed trile as thumb-darwin-apple.
Reviewers: john.brawn, jmolloy, bruno
Subscribers: jmolloy, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23090
llvm-svn: 277865
Summary: Thumb2 supports encoding immediates with specific patterns into mov.w by splatting the low 8 bits into other bytes.
Reviewers: john.brawn, jmolloy
Subscribers: jmolloy, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23090
llvm-svn: 277610
In this particular example we wouldn't want the smmls anyway (the value is
actually unused), but in general smmls does not provide the required flags
register so if that SUBE result is used we can't replace it.
llvm-svn: 277541
Retry r275776 (no changes, we suspect the issue was with another commit).
The current logic for handling inline asm operands in DAGToDAGISel interprets
the operands by looking for constants, which should represent the flags
describing the kind of operand we're dealing with (immediate, memory, register
def etc). The operands representing actual data are skipped only if they are
non-const, with the exception of immediate operands which are skipped explicitly
when a flag describing an immediate is found.
The oversight is that memory operands may be const too (e.g. for device drivers
reading a fixed address), so we should explicitly skip the operand following a
flag describing a memory operand. If we don't, we risk interpreting that
constant as a flag, which is definitely not intended.
Fixes PR26038
Differential Revision: https://reviews.llvm.org/D22103
llvm-svn: 276101
The current logic for handling inline asm operands in DAGToDAGISel interprets
the operands by looking for constants, which should represent the flags
describing the kind of operand we're dealing with (immediate, memory, register
def etc). The operands representing actual data are skipped only if they are
non-const, with the exception of immediate operands which are skipped explicitly
when a flag describing an immediate is found.
The oversight is that memory operands may be const too (e.g. for device drivers
reading a fixed address), so we should explicitly skip the operand following a
flag describing a memory operand. If we don't, we risk interpreting that
constant as a flag, which is definitely not intended.
Fixes PR26038
Differential Revision: https://reviews.llvm.org/D22103
llvm-svn: 275776
Thumb-1 doesn't have post-inc or pre-inc load or store instructions. However the LDM/STM instructions with writeback can function as post-inc load/store:
ldm r0!, {r1} @ load from r0 into r1 and increment r0 by 4
Obviously, this only works if the post increment is 4.
llvm-svn: 275540
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also removes a command line flag that isn't used in any of the tests:
check-vmlx-hazards. It can be replaced easily with the mattr mechanism, since
this is now a subtarget feature.
There is still some work left regarding FeatureExpandMLx. In the past MLx
expansion was enabled for subtargets with hasVFP2(), until r129775 [1] switched
from that to isCortexA9, without too much justification.
In spite of that, the code performing MLx expansion still contains calls to
isSwift/isLikeA9, although the results of those are pretty clear given that
we're only enabling it for the A9.
We should try to enable it for all targets that have FeatureHasVMLxHazards, as
it seems to be closely related to that behaviour, and if that is possible try to
clean up the MLx expansion pass from all calls to isWhatever. This will require
some performance testing, so it will be done in another patch.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20110418/119725.html
Differential Revision: http://reviews.llvm.org/D21798
llvm-svn: 274742
The important thing I was missing was ensuring newly added constants were kept in topological order. Repositioning the node is correct if the constant is newly added (so it has no topological ordering) but wrong if it already existed - positioning it next in the worklist would break the topological ordering.
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274543
We were using DAG->getConstant instead of DAG->getTargetConstant. This meant that we could inadvertently increase the use count of a constant if stars aligned, which it did in this testcase. Increasing the use count of the constant could cause ISel to fall over (because DAGToDAG lowering assumed the constant had only one use!)
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274510
TargetLowering and DAGToDAG are used to combine ADDC, ADDE and UMLAL
dags into UMAAL. Selection is split into the two phases because it
is easier to match the two patterns at those different times.
Differential Revision: http://http://reviews.llvm.org/D21461
llvm-svn: 273165
Reapplying patch as it was reverted when it was first
committed because of an assertion failure when the
mrrc2 intrinsic was called in ARM mode. The failure
was happening because the instruction was being built
in ARMISelDAGToDAG.cpp and the tablegen description for
mrrc2 instruction doesn't allow you to use a predicate.
The ARM architecture manuals do say that mrrc2 in ARM
mode can be predicated with AL in assembly but this has
no effect on the encoding of the instruction as the top
4 bits will always be 1111 not 1110 which is the encoding
for the condition AL.
Differential Revision: http://reviews.llvm.org/D21408
llvm-svn: 272982
We can only generate immediates up to #510 with a MOV+ADD, not #511, because there's no such instruction as add #256.
Found by Oliver Stannard and csmith!
llvm-svn: 272665
MRRC/MRRC2 instruction writes to two registers. The
intrinsic definition returns a single uint64_t to
represent the write, this is a compact way of
representing a write to two 32 bit registers,
the alternative might have been two return a
struct of 2 uint32_t's but this isn't as nice.
Differential Revision:
llvm-svn: 272544
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 272251
This adds an additional matcher to select UBFX(..) from SRL(AND(..)) in
ARMISelDAGToDAG to help with code size.
Patch by David Green.
Differential Revision: http://reviews.llvm.org/D20667
llvm-svn: 271384
This is a large change, but it's pretty mechanical:
- Where we were returning a node before, call ReplaceNode instead.
- Where we would return null to fall back to another selector, rename
the method to try* and return a bool for success.
- Where we were calling SelectNodeTo, just return afterwards.
Part of llvm.org/pr26808.
llvm-svn: 269258
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
llvm-svn: 268693
The code here is recursively Select-ing a new Node to avoid issues
where N is CSE'd during replaceDAGValue and stops being valid. We can
accomplish the same goal in a more principled way by using a
HandleSDNode.
This is essentially a less dodgy fix for PR25733 than the original
attempt back in r255120.
llvm-svn: 268590
The fast register-allocator cannot cope with inter-block dependencies without
spilling. This is fine for ldrex/strex loops coming from atomicrmw instructions
where any value produced within a block is dead by the end, but not for
cmpxchg. So we lower a cmpxchg at -O0 via a pseudo-inst that gets expanded
after regalloc.
Fortunately this is at -O0 so we don't have to care about performance. This
simplifies the various axes of expansion considerably: we assume a strong
seq_cst operation and ensure ordering via the always-present DMB instructions
rather than v8 acquire/release instructions.
Should fix the 32-bit part of PR25526.
llvm-svn: 266679
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
Added ISelDAGToDAG functions to enable selection of the smlawb, smlawt,
smulwb and smulwt instructions for the ARM backend. Also updated the smul
CodeGen test and removed the smulw one.
Differential Revision: http://reviews.llvm.org/D18892
llvm-svn: 265793
Add support for TLS access for Windows on ARM. This generates a similar access
to MSVC for ARM.
The changes to the tablegen data is needed to support loading an external symbol
global that is not for a call. The adjustments to the DAG to DAG transforms are
needed to preserve the 32-bit move.
llvm-svn: 259676
The basic optimisation was to convert (mul $LHS, $complex_constant) into
roughly "(shl (mul $LHS, $simple_constant), $simple_amt)" when it was expected
to be cheaper. The original logic checks that the mul only has one use (since
we're mangling $complex_constant), but when used in even more complex
addressing modes there may be an outer addition that can pick up the wrong
value too.
I *think* the ARM addressing-mode problem is actually unreachable at the
moment, but that depends on complex assessments of the profitability of
pre-increment addressing modes so I've put a real check in there instead of an
assertion.
llvm-svn: 259228
This patch was originally committed as r257884, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258682
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
Darwin TLS accesses most closely resemble ELF's general-dynamic situation,
since they have to be able to handle all possible situations. The descriptors
and so on are obviously slightly different though.
llvm-svn: 257039
We mutated the DAG, which invalidated the node we were trying to use
as a base register. Sometimes we got away with it, but other times the
node really did get deleted before it was finished with.
Should fix PR25733
llvm-svn: 255120
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following a revert of r248152 and new review comments, this patch also includes
renaming FeatureDSPThumb2 -> FeatureDSP, hasThumb2DSP() -> hasDSP(), etc.
The spelling of "t2dsp" is preserved, pending a further investigation of its
possible external usage.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248519
Turning (op x (mul y k)) into (op x (lsl (mul y k>>n) n)) is beneficial when
we can do the lsl as a shifted operand and the resulting multiply constant is
simpler to generate.
Do this by doing the transformation when trying to select a shifted operand,
as that ensures that it actually turns out better (the alternative would be to
do it in PreprocessISelDAG, but we don't know for sure there if extracting the
shift would allow a shifted operand to be used).
Differential Revision: http://reviews.llvm.org/D12196
llvm-svn: 247569
SelectT2ShifterOperandReg has identical behaviour to SelectImmShifterOperand,
so get rid of it and use SelectImmShifterOperand instead.
Differential Revision: http://reviews.llvm.org/D12195
llvm-svn: 246962
Other than PC-relative loads/store the patterns that match the various
load/store addressing modes have the same complexity, so the order that they
are matched is the order that they appear in the .td file.
Rearrange the instruction definitions in ARMInstrThumb.td, and make use of
AddedComplexity for PC-relative loads, so that the instruction matching order
is the order that results in the simplest selection logic. This also makes
register-offset load/store be selected when it should, as previously it was
only selected for too-large immediate offsets.
Differential Revision: http://reviews.llvm.org/D11800
llvm-svn: 244882
return StringSwitch<int>(Flags)
.Case("g", 0x1)
.Case("nzcvq", 0x2)
.Case("nzcvqg", 0x3)
.Default(-1);
...
// The _g and _nzcvqg versions are only valid if the DSP extension is
// available.
if (!Subtarget->hasThumb2DSP() && (Mask & 0x2))
return -1;
ARMARM confirms that the comment is right, and the code was wrong.
llvm-svn: 244029
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Summary:
But still handle them the same way since I don't know how they differ on
this target.
Of these, /U[qytnms]/ do not have backend tests but are accepted by clang.
No functional change intended.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8203
llvm-svn: 238921
This patch implements LLVM support for the ACLE special register intrinsics in
section 10.1, __arm_{w,r}sr{,p,64}.
This patch is intended to lower the read/write_register instrinsics, used to
implement the special register intrinsics in the clang patch for special
register intrinsics (see http://reviews.llvm.org/D9697), to ARM specific
instructions MRC,MCR,MSR etc. to allow reading an writing of coprocessor
registers in AArch32 and AArch64. This is done by inspecting the register
string passed to the intrinsic and then lowering to the appropriate
instruction.
Patch by Luke Cheeseman.
Differential Revision: http://reviews.llvm.org/D9699
llvm-svn: 237579
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break
anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate
Constraint_* values.
PR22883 was caused the matching operands copying the whole of the operand flags
for the matched operand. This included the constraint id which needed to be
replaced with the operand number. This has been fixed with a conversion
function. Following on from this, matching operands also used the operand
number as the constraint id. This has been fixed by looking up the matched
operand and taking it from there.
llvm-svn: 232165
This (r232027) has caused PR22883; so it seems those bits might be used by
something else after all. Reverting until we can figure out what else to do.
Original commit message:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
llvm-svn: 232093
Summary:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8171
llvm-svn: 232027
In theory this allows the compiler to skip materializing the array on
the stack. In practice clang often fails to do that, but that's a
different story. NFC.
llvm-svn: 231571
Thumb-1 only allows SP-based LDR and STR to be word-sized, and SP-base LDR,
STR, and ADD only allow offsets that are a multiple of 4. Make some changes
to better make use of these instructions:
* Use word loads for anyext byte and halfword loads from the stack.
* Enforce 4-byte alignment on objects accessed in this way, to ensure that
the offset is valid.
* Do the same for objects whose frame index is used, in order to avoid having
to use more than one ADD to generate the frame index.
* Correct how many bits of offset we think AddrModeT1_s has.
Patch by John Brawn.
llvm-svn: 230496
This re-applies r223862, r224198, r224203, and r224754, which were
reverted in r228129 because they exposed Clang misalignment problems
when self-hosting.
The combine caused the crashes because we turned ISD::LOAD/STORE nodes
to ARMISD::VLD1/VST1_UPD nodes. When selecting addressing modes, we
were very lax for the former, and only emitted the alignment operand
(as in "[r1:128]") when it was larger than the standard alignment of
the memory type.
However, for ARMISD nodes, we just used the MMO alignment, no matter
what. In our case, we turned ISD nodes to ARMISD nodes, and this
caused the alignment operands to start being emitted.
And that's how we exposed alignment problems that were ignored before
(but I believe would have been caught with SCTRL.A==1?).
To fix this, we can just mirror the hack done for ISD nodes: only
take into account the MMO alignment when the access is overaligned.
Original commit message:
We used to only combine intrinsics, and turn them into VLD1_UPD/VST1_UPD
when the base pointer is incremented after the load/store.
We can do the same thing for generic load/stores.
Note that we can only combine the first load/store+adds pair in
a sequence (as might be generated for a v16f32 load for instance),
because other combines turn the base pointer addition chain (each
computing the address of the next load, from the address of the last
load) into independent additions (common base pointer + this load's
offset).
rdar://19717869, rdar://14062261.
llvm-svn: 229932
It was missing from the VLD1/VST1 handling logic, even though the
corresponding instructions exist (same form as v2i64).
In preparation for a future patch.
llvm-svn: 223832
The previous code had a few problems, motivating the choices here.
1. It could create instructions clobbering CPSR, but the incoming MachineInstr
didn't reflect this. A potential source of corruption. This is why the patch
has a new PseudoInst for before lowering.
2. Similarly, there was some code to handle the incoming instruction not being
ARMCC::AL, but this would have caused massive problems if it was actually
invoked when a complex offset needing more than one instruction was requested.
3. It wasn't designed to handle unaligned pointers (or offsets). These should
probably be minimised anyway, but the code needs to deal with them properly
regardless.
4. It had some rather dubious ad-hoc code to avoid calling
emitThumbRegPlusImmediate, a function which should be designed to do precisely
this job.
We seem to cover the common cases correctly now, and hopefully can enhance
emitThumbRegPlusImmediate to handle any extra optimisations we need to add in
future.
llvm-svn: 220236
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
llvm-svn: 214838
We were assuming all SBFX-like operations would have the shl/asr form, but
often when the field being extracted is an i8 or i16, we end up with a
SIGN_EXTEND_INREG acting on a shift instead. Simple enough to check for though.
llvm-svn: 213754
subtarget. This involved having the movt predicate take the current
function - since we care about size in instruction selection for
whether or not to use movw/movt take the function so we can check
the attributes. This required adding the current MachineFunction to
FastISel and propagating through.
llvm-svn: 212309
The previous situation where ATOMIC_LOAD_WHATEVER nodes were expanded
at MachineInstr emission time had grown to be extremely large and
involved, to account for the subtly different code needed for the
various flavours (8/16/32/64 bit, cmpxchg/add/minmax).
Moving this transformation into the IR clears up the code
substantially, and makes future optimisations much easier:
1. an atomicrmw followed by using the *new* value can be more
efficient. As an IR pass, simple CSE could handle this
efficiently.
2. Making use of cmpxchg success/failure orderings only has to be done
in one (simpler) place.
3. The common "cmpxchg; did we store?" idiom can be exposed to
optimisation.
I intend to gradually improve this situation within the ARM backend
and make sure there are no hidden issues before moving the code out
into CodeGen to be shared with (at least ARM64/AArch64, though I think
PPC & Mips could benefit too).
llvm-svn: 205525
We've already got versions without the barriers, so this just adds IR-level
support for generating the new v8 ones.
rdar://problem/16227836
llvm-svn: 204813
ATOMIC_STORE operations always get here as a lowered ATOMIC_SWAP, so there's no
need for any code to handle them specially.
There should be no functionality change so no tests.
llvm-svn: 203567
With constant-sharing, litpool loads consume 4 + N*2 bytes of code, but
movw/movt pairs consume 8*N. This means litpools are better than movw/movt even
with just one use. Other materialisation strategies can still be better though,
so the logic is a little odd.
llvm-svn: 199891
These are used by MachO only at the moment, and (much like the existing
MOVW/MOVT set) work around the fact that the labels used in the actual
instructions often contain PC-dependent components, which means that repeatedly
materialising the same global can't be CSEed.
With small modifications, it could be adapted to how ELF finds the address of
_GLOBAL_OFFSET_TABLE_, which would give similar benefits in PIC mode there.
llvm-svn: 196090
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
llvm-svn: 191165
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
llvm-svn: 188995
When patching inlineasm nodes to use GPRPair for 64-bit values, we
were dropping the information that two operands were tied, which
effectively broke the live-interval of vregs affected.
llvm-svn: 188643
In the SelectionDAG immediate operands to inline asm are constructed as
two separate operands. The first is a constant of value InlineAsm::Kind_Imm
and the second is a constant with the value of the immediate.
In ARMDAGToDAGISel::SelectInlineAsm, if we reach an operand of Kind_Imm we
should skip over the next operand too.
llvm-svn: 185688
This patch assigns paired GPRs for inline asm with
64-bit data on ARM. It's enabled for both ARM and Thumb to support modifiers
like %H, %Q, %R.
llvm-svn: 185169
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
((x & 0xff00) >> 8) << 2
to
(x >> 6) & 0x3fc
This is general goodness since it folds a left shift into the mask. However,
the trailing zeros in the mask prevents the ARM backend from using the bit
extraction instructions. And worse since the mask materialization may require
an addition instruction. This comes up fairly frequently when the result of
the bit twiddling is used as memory address. e.g.
= ptr[(x & 0xFF0000) >> 16]
We want to generate:
ubfx r3, r1, #16, #8
ldr.w r3, [r0, r3, lsl #2]
vs.
mov.w r9, #1020
and.w r2, r9, r1, lsr #14
ldr r2, [r0, r2]
Add a late ARM specific isel optimization to
ARMDAGToDAGISel::PreprocessISelDAG(). It folds the left shift to the
'base + offset' address computation; change the mask to one which doesn't have
trailing zeros and enable the use of ubfx.
Note the optimization has to be done late since it's target specific and we
don't want to change the DAG normalization. It's also fairly restrictive
as shifter operands are not always free. It's only done for lsh 1 / 2. It's
known to be free on some cpus and they are most common for address
computation.
This is a slight win for blowfish, rijndael, etc.
rdar://12870177
llvm-svn: 170581
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
This patch replaces the hard coded GPR pair [R0, R1] of
Intrinsic:arm_ldrexd and [R2, R3] of Intrinsic:arm_strexd with
even/odd GPRPair reg class.
Similar to the lowering of atomic_64 operation.
llvm-svn: 168207
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph);
* use \param instead of \arg to document parameters in order to be consistent
with the rest of the codebase.
llvm-svn: 163902
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
llvm-svn: 163136
When predicating this instruction:
Rd = ADD Rn, Rm
We need an extra operand to represent the value given to Rd when the
predicate is false:
Rd = ADDCC Rfalse, Rn, Rm, pred
The Rd and Rfalse operands are different registers while in SSA form.
Rfalse is tied to Rd to make sure they get the same register during
register allocation.
Previously, Rd and Rn were tied, but that is not required.
Compare to MOVCC:
Rd = MOVCC Rfalse, Rtrue, pred
llvm-svn: 161955
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
llvm-svn: 161581
While there is an encoding for it in VUZP, the result of that is undefined,
so we should avoid it. Define the instruction as a pseudo for VTRN.32
instead, as the ARM ARM indicates.
rdar://11222366
llvm-svn: 154511
While there is an encoding for it in VZIP, the result of that is undefined,
so we should avoid it. Define the instruction as a pseudo for VTRN.32
instead, as the ARM ARM indicates.
rdar://11221911
llvm-svn: 154505
With the new composite physical registers to represent arbitrary pairs
of DPR registers, we don't need the pseudo-registers anymore. Get rid of
a bunch of them that use DPR register pairs and just use the real
instructions directly instead.
llvm-svn: 152045
James Molloy