Replace uses of GetModuleAtIndexUnlocked and
GetModulePointerAtIndexUnlocked with the ModuleIterable and
ModuleIterableNoLocking where applicable.
Differential revision: https://reviews.llvm.org/D94271
GetCommandSPExact is called exaclty once with include_aliases set to
true, so make it a default argument. Use early returns to simplify the
implementation.
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
This reverts commit a01b26fb51, because it
breaks the "finish" command in some way -- the command does not
terminate after it steps out, but continues running the target. The
exact blast radius is not clear, but it at least affects the usage of
the "finish" command in TestGuiBasicDebug.py. The error is *not*
gui-related, as the same issue can be reproduced by running the same
steps outside of the gui.
There is some kind of a race going on, as the test fails only 20% of the
time on the buildbot.
Currently, the interpreter's context is not updated until a command is executed.
This has resulted in the behavior of SB-interface functions and some commands
depends on previous user actions. The interpreter's context can stay uninitialized,
point to a currently selected target, or point to one of previously selected targets.
This patch removes any usages of CommandInterpreter::UpdateExecutionContext.
CommandInterpreter::HandleCommand* functions still may override context temporarily,
but now they always restore it before exiting. CommandInterpreter saves overriden
contexts to the stack, that makes nesting commands possible.
Added test reproduces one of the issues. Without this fix, the last assertion fails
because interpreter's execution context is empty until running "target list", so,
the value of the global property was updated instead of process's local instance.
Differential Revision: https://reviews.llvm.org/D92164
TargetList::CreateTarget automatically adds created target to the list, however,
CommandObjectTargetCreate does some additional preparation after creating a target
and which can fail. The command should remove created target if it failed. Since
the function has many ways to return, scope guard does this work safely.
Changes to the TargetList make target adding and selection more transparent.
Other changes remove unnecessary SetSelectedTarget after CreateTarget.
Differential Revision: https://reviews.llvm.org/D93052
LLDB is ignoring compilation errors for one-line breakpoint scripts.
This patch fixes the issues and now the error message of the
ScriptInterpreter is shown to the user.
I had to remove a new-line character for the Lua interpreter since it
was duplicated.
Differential Revision: https://reviews.llvm.org/D92729
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
Depends on D89408.
This diff finally implements trace decoding!
The current interface is
$ trace load /path/to/trace/session/file.json
$ thread trace dump instructions
thread #1: tid = 3842849, total instructions = 22
[ 0] 0x40052d
[ 1] 0x40052d
...
[19] 0x400521
$ # simply enter, which is a repeat command
[20] 0x40052d
[21] 0x400529
...
This doesn't do any disassembly, which will be done in the next diff.
Changes:
- Added an IntelPTDecoder class, that is a wrapper for libipt, which is the actual library that performs the decoding.
- Added TraceThreadDecoder class that decodes traces and memoizes the result to avoid repeating the decoding step.
- Added a DecodedThread class, which represents the output from decoding and that for the time being only stores the list of reconstructed instructions. Later it'll contain the function call hierarchy, which will enable reconstructing backtraces.
- Added basic APIs for accessing the trace in Trace.h:
- GetInstructionCount, which counts the number of instructions traced for a given thread
- IsTraceFailed, which returns an Error if decoding a thread failed
- ForEachInstruction, which iterates on the instructions traced for a given thread, concealing the internal storage of threads, as plug-ins can decide to generate the instructions on the fly or to store them all in a vector, like I do.
- DumpTraceInstructions was updated to print the instructions or show an error message if decoding was impossible.
- Tests included
Differential Revision: https://reviews.llvm.org/D89283
Make it possible to use a relative path in command script import to the
location of the file being sourced. This allows the user to put Python
scripts next to LLDB command files and importing them without having to
specify an absolute path.
To enable this behavior pass `-c` to `command script import`. The
argument can only be used when sourcing the command from a file.
rdar://68310384
Differential revision: https://reviews.llvm.org/D89334
For performance reasons the reproducers don't copy the files captured by
the file collector eagerly, but wait until the reproducer needs to be
generated.
This is a problematic when LLDB crashes and we have to do all this
signal-unsafe work in the signal handler. This patch uses a similar
trick to clang, which has the driver invoke a new cc1 instance to do all
this work out-of-process.
This patch moves the writing of the mapping file as well as copying over
the reproducers into a separate process spawned when lldb crashes.
Differential revision: https://reviews.llvm.org/D89600
Depends on D88841
As per the discussion in the RFC, we'll implement both
thread trace dump [instructions | functions]
This is the first step in implementing the "instructions" dumping command.
It includes:
- A minimal ProcessTrace plugin for representing processes from a trace file. I noticed that it was a required step to mimic how core-based processes are initialized, e.g. ProcessElfCore and ProcessMinidump. I haven't had the need to create ThreadTrace yet, though. So far HistoryThread seems good enough.
- The command handling itself in CommandObjectThread, which outputs a placeholder text instead of the actual instructions. I'll do that part in the next diff.
- Tests
{F13132325}
Differential Revision: https://reviews.llvm.org/D88769
With the feedback I was getting in different diffs, I realized that splitting the parsing logic into two classes was not easy to deal with. I do see value in doing that, but I'd rather leave that as a refactor after most of the intel-pt logic is in place. Thus, I'm merging the common parser into the intel pt one, having thus only one that is fully aware of Intel PT during parsing and object creation.
Besides, based on the feedback in https://reviews.llvm.org/D88769, I'm creating a ThreadIntelPT class that will be able to orchestrate decoding of its own trace and can handle the stop events correctly.
This leaves the TraceIntelPT class as an initialization class that glues together different components. Right now it can initialize a trace session from a json file, and in the future will be able to initialize a trace session from a live process.
Besides, I'm renaming SettingsParser to SessionParser, which I think is a better name, as the json object represents a trace session of possibly many processes.
With the current set of targets, we have the following
- Trace: main interface for dealing with trace sessions
- TraceIntelPT: plugin Trace for dealing with intel pt sessions
- TraceIntelPTSessionParser: a parser of a json trace session file that can create a corresponding TraceIntelPT instance along with Targets, ProcessTraces (to be created in https://reviews.llvm.org/D88769), and ThreadIntelPT threads.
- ProcessTrace: (to be created in https://reviews.llvm.org/D88769) can handle the correct state of the traces as the user traverses the trace. I don't think there'll be a need an intel-pt specific implementation of this class.
- ThreadIntelPT: a thread implementation that can handle the decoding of its own trace file, along with keeping track of the current position the user is looking at when doing reverse debugging.
Differential Revision: https://reviews.llvm.org/D88841
This reverts commit c65627a1fe.
The test immediately after the new invalid symbol test was
failing on Windows. This was because when we called
VirtualQueryEx to get the region info for 0x0,
even if it succeeded we would call GetLastError.
Which must have picked up the last error that was set while
trying to lookup "not_an_address". Which happened to be 2.
("The system cannot find the file specified.")
To fix this only call GetLastError when we know VirtualQueryEx
has failed. (when it returns 0, which we were also checking for anyway)
Also convert memory region to an early return style
to make the logic clearer.
Reviewed By: labath, stella.stamenova
Differential Revision: https://reviews.llvm.org/D88229
This reverts commit f775fe5964.
I fixed a return type error in the original patch that was causing a test failure.
Also added a REQUIRES: python to the shell test so we'll skip this for
people who build lldb w/o Python.
Also added another test for the error printing.
There was a little thinko which meant when stopped in a frame with
debug information but whose CU didn't have any global variables we
report:
no debug info for frame <N>
This patch fixes that error message to say the intended:
no global variables in current compile unit
<rdar://problem/69086361>
This is the first in a series of patches that will adds a new processor trace plug-in to LLDB.
The idea for this first patch to to add the plug-in interface with simple commands for the trace files that can "load" and "dump" the trace information. We can test the functionality and ensure people are happy with the way things are done and how things are organized before moving on to adding more functionality.
Processor trace information can be view in a few different ways:
- post mortem where a trace is saved off that can be viewed later in the debugger
- gathered while a process is running and allow the user to step back in time (with no variables, memory or registers) to see how each thread arrived at where it is currently stopped.
This patch attempts to start with the first solution of loading a trace file after the fact. The idea is that we will use a JSON file to load the trace information. JSON allows us to specify information about the trace like:
- plug-in name in LLDB
- path to trace file
- shared library load information so we can re-create a target and symbolicate the information in the trace
- any other info that the trace plug-in will need to be able to successfully parse the trace information
- cpu type
- version info
- ???
A new "trace" command was added at the top level of the LLDB commmands:
- "trace load"
- "trace dump"
I did this because if we load trace information we don't need to have a process and we might end up creating a new target for the trace information that will become active. If anyone has any input on where this would be better suited, please let me know. Walter Erquinigo will end up filling in the Intel PT specific plug-in so that it works and is tested once we can agree that the direction of this patch is the correct one, so please feel free to chime in with ideas on comments!
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D85705
Update the some examples in the help string for `breakpoint command add`.
Python breakpoint commands have different output than what's shown in the help string.
Notes:
* Removed an example containing an inner function, as it seems more about a Python technique than about `command script add`
* Updated `print x` to `print(x)` to be python 2/3 agnostic
Differential Revision: https://reviews.llvm.org/D87807
Previously when <addr> in "memory region <addr>" didn't
parse correctly, we'd print an error then also ask lldb-server
for a region containing LLDB_INVALID_ADDRESS.
(lldb) memory region not_an_address
error: invalid address argument "not_an_address"...
error: Server returned invalid range
Only send the command to lldb-server if the address
parsed correctly.
(lldb) memory region not_an_address
error: invalid address argument "not_an_address"...
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87694
Make it possible to run the script command with a different language
than currently selected.
$ ./bin/lldb -l python
(lldb) script -l lua
>>> io.stdout:write("Hello, World!\n")
Hello, World!
When passing the language option and a raw command, you need to separate
the flag from the script code with --.
$ ./bin/lldb -l python
(lldb) script -l lua -- io.stdout:write("Hello, World!\n")
Hello, World!
Differential revision: https://reviews.llvm.org/D86996
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
This patch adds the ability to use a custom interpreter with the
`platform shell` command. If the user set the `-s|--shell` option
with the path to a binary, lldb passes it down to the platform's
`RunShellProcess` method and set it as the shell to use in
`ProcessLaunchInfo to run commands.
Note that not all the Platforms support running shell commands with
custom interpreters (i.e. RemoteGDBServer is only expected to use the
default shell).
This patch also makes some refactoring and cleanups, like swapping
CString for StringRef when possible and updating `SBPlatformShellCommand`
with new methods and a new constructor.
rdar://67759256
Differential Revision: https://reviews.llvm.org/D86667
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Move the CommandObjectScript and CommandObjectRegexCommand under
Commands where all the other CommandObject implementations live.
Although neither implementations currently use the TableGen-generated
CommandOptions.inc, this move would have been necessary anyway if they
were to in the future.
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
1. Added a dedicated completion to class `CommandObjectTypeFormatterDelete`
which can be used by these commands: `type filter/format/summary/synthetic delete`;
2. Added a related test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84142
Update the "image show-unwind" command output to show if the function
being shown is listed as a user-setting or platform trap handler.
Update the individual UnwindPlan dumps to show whether the unwind plan
is registered as a trap handler.
When replaying a reproducer captured from a core file, we always use
dsymForUUID for the kernel binary. When enabled, we also use it to find
kexts. Since these files are already contained in the reproducer,
there's no reason to call out to an external tool. If the tool returns a
different result, e.g. because the dSYM got garbage collected, it will
break reproducer replay. The SymbolFileProvider solves the issue by
mapping UUIDs to module and symbol paths in the reproducer.
Differential revision: https://reviews.llvm.org/D86389
1. Added a new common completion TypeCategoryNames to provide a list of category names for completion;
2. Applied the completion to these commands: type category delete/enable/disable/list/define;
3. Added a related test case;
4. Bound the completion to the arguments of the type 'eArgTypeName'.
Reviewed By: teemperor, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84124
1. Extended the gdb-remote communication related classes with disk file/directory
completion functions;
2. Added two common completion functions RemoteDiskFiles and
RemoteDiskDirectories based on the functions above;
3. Added completion for these commands:
A. platform get-file <remote-file> <local-file>;
B. platform put-file <local-file> <remote-file>;
C. platform get-size <remote-file>;
D. platform settings -w <remote-dir>;
E. platform open file <remote-file>.
4. Added related tests for client and server;
5. Updated docs/lldb-platform-packets.txt.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85284
1. Added two common completions: `ProcessIDs` and `ProcessNames`, which are
refactored from their original dedicated option completions;
2. Removed the dedicated option completion functions of `process attach` and
`platform process attach`, so that they can use arg-type-bound common
completions instead;
3. Bound `eArgTypePid` to the pid completion, `eArgTypeProcessName` to the
process name completion in `CommandObject.cpp`;
4. Added a related test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D80700
1. Complete `process load` with the common disk file completion, so there is not test provided for it;
2. Complete `process unload` with the tokens of valid loaded images.
Thanks for Raphael's help on the test for `process unload`.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D79887
When replaying the reproducer, lldb should source the .lldbinit file
that was captured by the reproducer and not the one in the current home
directory. This requires that we store the home directory as part of the
reproducer. By returning the virtual home directory during replay, we
ensure the correct virtual path gets constructed which the VFS can then
find and remap to the correct file in the reproducer root.
This patch adds a new HomeDirectoryProvider, similar to the existing
WorkingDirectoryProvider. As the home directory is not part of the VFS,
it is stored in LLDB's FileSystem instance.
1. created a common completion for breakpoint names;
2. bound the breakpoint name common completion with eArgTypeBreakpointName;
3. implemented the dedicated completion for breakpoint read -N.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D80693
1. Added a common completion WatchPointIDs to complete with a list of the IDs of the current watchpoints;
2. Applied the completion to these commands: watchpoint delete/enable/disable/modify/ignore;
3. Added a correlated test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84104
1. Added a common completion completing with a list of the threads of the current process;
2. Apply the common completion above to these commands: thread
continue/info/exception/select/step-in/step-inst/step-inst-over/step-out/step-over/step-script
3. Correlated test case test_common_completion_thread_index.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84088
1. Added a common completion StopHookIDs to provide completion with a list of stop hook ids;
2. Applied the common completion to commands: `target stop-hook delete/enable/disable';
3. Added an related test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84123
1. Added a common completion ModuleUUIDs to provide a list of the UUIDs of modules for completion;
2. Added a new enumeration item eArgTypeModuleUUID to CommandArgumentType which is set as the option argument type of OptionGroupUUID;
3. Applied the module UUID completion to the argument of the type eArgTypeModuleUUID in lldb/source/Interpreter/CommandObject.cpp;
4. Added an related test case in lldb/test/API/functionalities/completion/TestCompletion.py.
Commands frame select and thread backtrace -s can be completed in the same way.
Moved the dedicated completion of frame select into a common completion and
apply it to the both commands, along with the test modified.
Jonas Devlieghere