If we are extracting a subvector that has just been inserted then we should just use the original inserted subvector.
This has come up in certain several x86 shuffle lowering cases where we are crossing 128-bit lanes.
Differential Revision: https://reviews.llvm.org/D24254
llvm-svn: 280715
For the store of a wide value merged from a pair of values, especially int-fp pair,
sometimes it is more efficent to split it into separate narrow stores, which can
remove the bitwise instructions or sink them to colder places.
Now the feature is only enabled on x86 target, and only store of int-fp pair is
splitted. It is possible that the application scope gets extended with perf evidence
support in the future.
Differential Revision: https://reviews.llvm.org/D22840
llvm-svn: 280505
This fixes a regression introduced by revision 268094.
Revision 268094 added the following dag combine rule:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.size / 2
That rule converts a truncate of a shift-by-constant into a shift of a truncated
value. We do this only if the shift count is less than half the size in bits of
the truncated value (K < vt.size / 2).
The problem is that the constraint on the shift count is incorrect, so the rule
doesn't work well in some cases involving vector types. The combine rule should
have been written instead like this:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.getScalarSizeInBits()
Basically, if K is smaller than the "scalar size in bits" of the truncated value
then we know that by "sinking" the truncate into the operand of the shift we
would never accidentally make the shift undefined.
This patch fixes the check on the shift count, and adds test cases to make sure
that we don't regress the behavior.
Differential Revision: https://reviews.llvm.org/D24154
llvm-svn: 280482
When expanding a SETCC for which the low half is known to evaluate to false,
we can only throw it away for LT/GT comparisons, not LE/GE.
This fixes PR29170.
Differential Revision: https://reviews.llvm.org/D24151
llvm-svn: 280424
Prior to this, we could generate a vector_shuffle from an IR shuffle when the
size of the result was exactly the sum of the sizes of the input vectors.
If the output vector was narrower - e.g. a <12 x i8> being formed by a shuffle
with two <8 x i8> inputs - we would lower the shuffle to a sequence of extracts
and inserts.
Instead, we can form a larger vector_shuffle, and then extract a subvector
of the right size - e.g. shuffle the two <8 x i8> inputs into a <16 x i8>
and then extract a <12 x i8>.
This also includes a target-specific X86 combine that in the presence of
AVX2 combines:
(vector_shuffle <mask> (concat_vectors t1, undef)
(concat_vectors t2, undef))
into:
(vector_shuffle <mask> (concat_vectors t1, t2), undef)
in cases where this allows us to form VPERMD/VPERMQ.
(This is not a separate commit, as that pattern does not appear without
the DAGBuilder change.)
llvm-svn: 280418
Legalization tends to create anyext(trunc) patterns. This should always be
combined - into either a single trunc, a single ext, or nothing if the
types match exactly. But if we happen to combine the trunc first, we may pull
the trunc away from the anyext or make it implicit (e.g. the truncate(extract)
-> extract(bitcast) fold).
To prevent this, we can avoid doing the fold, similarly to how we already handle
fpround(fpextend).
Differential Revision: https://reviews.llvm.org/D23893
llvm-svn: 280386
LLVM has an @llvm.eh.dwarf.cfa intrinsic, used to lower the GCC-compatible
__builtin_dwarf_cfa() builtin. As pointed out in PR26761, this is currently
broken on PowerPC (and likely on ARM as well). Currently, @llvm.eh.dwarf.cfa is
lowered using:
ADD(FRAMEADDR, FRAME_TO_ARGS_OFFSET)
where FRAME_TO_ARGS_OFFSET defaults to the constant zero. On x86,
FRAME_TO_ARGS_OFFSET is lowered to 2*SlotSize. This setup, however, does not
work for PowerPC. Because of the way that the stack layout works, the canonical
frame address is not exactly (FRAMEADDR + FRAME_TO_ARGS_OFFSET) on PowerPC
(there is a lower save-area offset as well), so it is not just a matter of
implementing FRAME_TO_ARGS_OFFSET for PowerPC (unless we redefine its
semantics -- We can do that, since it is currently used only for
@llvm.eh.dwarf.cfa lowering, but the better to directly lower the CFA construct
itself (since it can be easily represented as a fixed-offset FrameIndex)). Mips
currently does this, but by using a custom lowering for ADD that specifically
recognizes the (FRAMEADDR, FRAME_TO_ARGS_OFFSET) pattern.
This change introduces a ISD::EH_DWARF_CFA node, which by default expands using
the existing logic, but can be directly lowered by the target. Mips is updated
to use this method (which simplifies its implementation, and I suspect makes it
more robust), and updates PowerPC to do the same.
Fixes PR26761.
Differential Revision: https://reviews.llvm.org/D24038
llvm-svn: 280350
This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes.
The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate.
Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.)
My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default.
Differential Revision: https://reviews.llvm.org/D24000
llvm-svn: 280250
The problem occurs when the Node doesn't updated in place , UpdateNodeOperation() return the node that already exist.
In this case assert fail in PromoteIntegerOperand() , N have 2 results ( val + chain).
Differential Revision: http://reviews.llvm.org/D23756
llvm-svn: 279961
Summary:
This greatly simplifies our handling of SDNode::SubclassData.
NFC, hopefully. :)
See discussion in D23035 for discussion about the design API of these
bitfields.
Reviewers: chandlerc
Subscribers: llvm-commits, rnk
Differential Revision: https://reviews.llvm.org/D23036
llvm-svn: 279537
That commit added a new version of Intrinsic::getName which should only
be called when the intrinsic has no overloaded types. There are several
debugging paths, such as SDNode::dump which are printing the name of the
intrinsic but don't have the overloaded types. These paths should be ok
to just print the name instead of crashing.
The fix here is ultimately to just add a 'None' second argument as that
calls the overload capable getName, which is less efficient, but this is a
debugging path anyway, and not perf critical.
Thanks to Björn Pettersson for pointing out that there were more crashes.
llvm-svn: 279528
The heuristic above this code is incredibly suspect, but disregarding that it mutates the cast opcode so we need to check the *mutated* opcode later to see if we need to emit an AssertSext or AssertZext node.
Fixes PR29041.
llvm-svn: 279223
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
Following the discussion on D22038, this refactors a PowerPC specific setcc -> srl(ctlz) transformation so it can be used by other targets.
Differential Revision: https://reviews.llvm.org/D23445
llvm-svn: 278799
in debug info using their stack slots instead of as an indirection of param reg + 0
offset. This is done by detecting FrameIndexSDNodes in SelectionDAG and generating
FrameIndexDbgValues for them. This ultimately generates DBG_VALUEs with stack
location operands.
Differential Revision: http://reviews.llvm.org/D23283
llvm-svn: 278703
Remove all ilist_iterator to pointer casts. There were two reasons for
casts:
- Checking for an uninitialized (i.e., null) iterator. I added
MachineInstrBundleIterator::isValid() to check for that case.
- Comparing an iterator against the underlying pointer value while
avoiding converting the pointer value to an iterator. This is
occasionally necessary in MachineInstrBundleIterator, since there is
an assertion in the constructors that the underlying MachineInstr is
not bundled (but we don't care about that if we're just checking for
pointer equality).
To support the latter case, I rewrote the == and != operators for
ilist_iterator and MachineInstrBundleIterator.
- The implicit constructors now use enable_if to exclude
const-iterator => non-const-iterator conversions from overload
resolution (previously it was a compiler error on instantiation, now
it's SFINAE).
- The == and != operators are now global (friends), and are not
templated.
- MachineInstrBundleIterator has overloads to compare against both
const_pointer and const_reference. This avoids the implicit
conversions to MachineInstrBundleIterator that assert, instead just
checking the address (and I added unit tests to confirm this).
Notably, the only remaining uses of ilist_iterator::getNodePtrUnchecked
are in ilist.h, and no code outside of ilist*.h directly relies on this
UB end-iterator-to-pointer conversion anymore. It's still needed for
ilist_*sentinel_traits, but I'll clean that up soon.
llvm-svn: 278478
If the input vector to INSERT_SUBVECTOR is another INSERT_SUBVECTOR, and this inserted subvector replaces the last insertion, then insert into the common source vector.
i.e.
INSERT_SUBVECTOR( INSERT_SUBVECTOR( Vec, SubOld, Idx ), SubNew, Idx ) --> INSERT_SUBVECTOR( Vec, SubNew, Idx )
Differential Revision: https://reviews.llvm.org/D23330
llvm-svn: 278211
As detailed on D22726, much of the shift combining code assume constant values will fit into a uint64_t value and calls ConstantSDNode::getZExtValue where it probably shouldn't (leading to asserts). Using APInt directly avoids this problem but we encounter other assertions if we attempt to compare/operate on 2 APInt of different bitwidths.
This patch adds a helper function to ensure that 2 APInt values are zero extended as required so that they can be safely used together. I've only added an initial example use for this to the '(SHIFT (SHIFT x, c1), c2) --> (SHIFT x, (ADD c1, c2))' combines. Further cases can easily be added as required.
Differential Revision: https://reviews.llvm.org/D23007
llvm-svn: 278141
On modern Intel processors hardware SQRT in many cases is faster than RSQRT
followed by Newton-Raphson refinement. The patch introduces a simple heuristic
to choose between hardware SQRT instruction and Newton-Raphson software
estimation.
The patch treats scalars and vectors differently. The heuristic is that for
scalars the compiler should optimize for latency while for vectors it should
optimize for throughput. It is based on the assumption that throughput bound
code is likely to be vectorized.
Basically, the patch disables scalar NR for big cores and disables NR completely
for Skylake. Firstly, scalar SQRT has shorter latency than NR code in big cores.
Secondly, vector SQRT has been greatly improved in Skylake and has better
throughput compared to NR.
Differential Revision: https://reviews.llvm.org/D21379
llvm-svn: 277725
When expanding FP constants, we attempt to shrink doubles to floats and perform an extending load.
However, on SystemZ, and possibly on other targets (I've only confirmed the problem on SystemZ), the FP extending load instruction may convert SNaN into QNaN, or may cause an exception. So in the general case, we would still like to shrink FP constants, but SNaNs should be left as doubles.
Differential Revision: https://reviews.llvm.org/D22685
llvm-svn: 277602
We used to combine "sext(setcc x, y, cc) -> (select (setcc x, y, cc), -1, 0)"
Instead, we should combine to (select (setcc x, y, cc), T, 0) where the value
of T is 1 or -1, depending on the type of the setcc, and getBooleanContents()
for the type if it is not i1.
This fixes PR28504.
llvm-svn: 277371
Summary:
When performing cmp for EQ/NE and the operand is sign extended, we can
avoid the truncaton if the bits to be tested are no less than origianl
bits.
Reviewers: eli.friedman
Subscribers: eli.friedman, aemerson, nemanjai, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D22933
llvm-svn: 277252
Patch by Sunita Marathe
Third try, now following fixes to MSan to handle mempcy in such a way that this commit won't break the MSan buildbots. (Thanks, Evegenii!)
llvm-svn: 277189
[DAG] Check debug values for invalidation before transferring and mark
old debug values invalid when transferring to another SDValue.
This fixes PR28613.
Reviewers: jyknight, hans, dblaikie, echristo
Subscribers: yaron.keren, ismail, llvm-commits
Differential Revision: https://reviews.llvm.org/D22858
llvm-svn: 277135
Using getZExtValue() will assert if the value doesn't fit into uint64_t - SHL was already doing this, I've just updated ASHR/LSHR to match
As mentioned on D22726
llvm-svn: 276855
An extension of D19978, this patch replaces the default BITREVERSE evaluation of individual bit masks+shifts with block mask+shifts when we have integer elements of power-of-2 bits in size.
After calling BSWAP to reverse the order of the constituent bytes (which typically follows a similar approach), every neighbouring 4-bits, 2-bits and finally 1-bit pairs are masked off and swapped over with shifts.
In doing so we can significantly reduce the number of operations required.
Differential Revision: https://reviews.llvm.org/D21578
llvm-svn: 276432
The following condition expression ( a >> n) & 1 is converted to "bt a, n" instruction. It works on all intel targets.
But on AVX-512 it was broken because the expression is modified to (truncate (a >>n) to i1).
I added the new sequence (truncate (a >>n) to i1) to the BT pattern.
Differential Revision: https://reviews.llvm.org/D22354
llvm-svn: 275950
DAGTypeLegalizer::CanSkipSoftenFloatOperand should allow
SELECT op code for x86_64 fp128 type for MME targets,
so SoftenFloatOperand does not abort on SELECT op code.
Differential Revision: http://reviews.llvm.org/D21758
llvm-svn: 275818
When SelectionDAGISel transforms a node representing an inline asm
block, memory constraint information is not preserved. This can cause
constraints to be broken when a memory offset is of the form:
offset + frame index
when the frame is resolved.
By propagating the constraints all the way to the backend, targets can
enforce memory operands of inline assembly to conform to their constraints.
For MIPSR6, some instructions had their offsets reduced to 9 bits from
16 bits such as ll/sc. This becomes problematic when using inline assembly
to perform atomic operations, as an offset can generated that is too big to
encode in the instruction.
Reviewers: dsanders, vkalintris
Differential Review: https://reviews.llvm.org/D21615
llvm-svn: 275786
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
Summary:
Previously we took an unsigned.
Hooray for type-safety.
Reviewers: chandlerc
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D22282
llvm-svn: 275591
Simon Pilgrim