The legacy PM doesn't run EP_ModuleOptimizerEarly on -O0, so skip
running it here when given O0.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93886
And add it to the AMDGPU opt pipeline.
This is a function pass instead of a module pass (like the legacy pass)
because it's getting added to a CGSCCPassManager, and you can't put a
module pass in a CGSCCPassManager.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93885
And add to AMDGPU opt pipeline.
Don't pin an opt run to the legacy PM when -enable-new-pm=1 if these
passes (or passes introduced in https://reviews.llvm.org/D93863) are in
the list of passes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93875
And add them to the pipeline via
AMDGPUTargetMachine::registerPassBuilderCallbacks(), which mirrors
AMDGPUTargetMachine::adjustPassManager().
These passes can't be unconditionally added to PassRegistry.def since
they are only present when the AMDGPU backend is enabled. And there are
no target-specific headers in llvm/include, so parsing these pass names
must occur somewhere in the AMDGPU directory. I decided the best place
was inside the TargetMachine, since the PassBuilder invokes
TargetMachine::registerPassBuilderCallbacks() anyway. If we come up with
a cleaner solution for target-specific passes in the future that's fine,
but there aren't too many target-specific IR passes living in
target-specific directories so it shouldn't be too bad to change in the
future.
Reviewed By: ychen, arsenm
Differential Revision: https://reviews.llvm.org/D93863
This will ensure that passes that add new global variables will create them
in address space 1 once the passes have been updated to no longer default
to the implicit address space zero.
This also changes AutoUpgrade.cpp to add -G1 to the DataLayout if it wasn't
already to present to ensure bitcode backwards compatibility.
Reviewed by: arsenm
Differential Revision: https://reviews.llvm.org/D84345
- In certain cases, a generic pointer could be assumed as a pointer to
the global memory space or other spaces. With a dedicated target hook
to query that address space from a given value, infer-address-space
pass could infer and propagate that to all its users.
Differential Revision: https://reviews.llvm.org/D91121
SIPreAllocateWWMRegs was being inserted after RegisterCoalescer
but this pass does not exist during FastAlloc so pre-allocation
pass was never being run.
Insert pre-allocation after TwoAddressInstructionPass instead.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D90236
Exec mask manipulation inserted by SIWholeQuadMode barriers to
instruction scheduling. Move the entire pass after the machine
instruction scheduler and make changes so pass is correct for
non-SSA operation. These changes should leave the pass still
usable pre-scheduler, although tests have be updated to reflect
post-scheduler results.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D88081
If a target can encode multiple wait-states into a noop allow emitting such
instructions directly.
Reviewed By: rampitec, dmgreen
Differential Revision: https://reviews.llvm.org/D89753
If instructions were removed in peephole passes after the hazard recognizer was
run it is possible that new hazards could be introduced.
Fixes: SWDEV-253090
Reviewed By: rampitec, arsenm
Differential Revision: https://reviews.llvm.org/D89077
Clustering loads has caching benefits, but as far as I know there is no
advantage to clustering stores on any AMDGPU subtargets.
The disadvantage is that it tends to increase register pressure and
restricts scheduling freedom.
Differential Revision: https://reviews.llvm.org/D85530
We weren't using this before, so none of the MachineFunction CFG edges had the
branch probability information added. As a result, block placement later in the
pipeline was flying blind.
This is enabled only with optimizations enabled like SelectionDAG.
Differential Revision: https://reviews.llvm.org/D86824
There's a special case in hasAttribute for None when pImpl is null. If pImpl is not null we dispatch to pImpl->hasAttribute which will always return false for Attribute::None.
So if we just want to check for None its sufficient to just check that pImpl is null. Which can even be done inline.
This patch adds a helper for that case which I hope will speed up our getSubtargetImpl implementations.
Differential Revision: https://reviews.llvm.org/D86744
This was only used for matching the saddr addressing mode of global
instructions, but this was not implemented correctly. The instruction
definitions aren't even correct, and are defined as using a 64-bit
VGPR component. Eliminate this pass to enable correcting the
instruction definitions. A new matching implementation can work in
GlobalISel or relying on DAG divergence information for the base
address.
It is possible that LowerSwitch pass leaves certain blocks
unreachable from the entry. If not removed, these dead blocks
can cause undefined behavior in the subsequent passes.
It caused a crash in the AMDGPU backend after the instruction
selection when a PHI node has its incoming values coming from
these unreachable blocks.
In the AMDGPU pass flow, the last invocation of UnreachableBlockElim
precedes where LowerSwitch is currently placed and eventually
missed out on the opportunity to get these blocks eliminated.
This patch ensures that LowerSwitch pass get inserted earlier
to make use of the existing unreachable block elimination pass.
Reviewed By: sameerds, arsenm
Differential Revision: https://reviews.llvm.org/D83584
Generate a single early exit block out-of-line and branch to this
if all lanes are killed. This avoids branching if lanes are active.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D82641
Promote alloca to vector before SROA and loop unroll. If we manage
to eliminate allocas before unroll we may choose to unroll less.
Differential Revision: https://reviews.llvm.org/D80386
Enable clausing of memory loads on gfx10 by adding a new pass to insert
the s_clause instructions that mark the start of each hard clause.
Differential Revision: https://reviews.llvm.org/D79792
Summary: This change enables all kind of carry out ISD opcodes to be selected according to the node divergence.
Reviewers: rampitec, arsenm, vpykhtin
Reviewed By: rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78091
An irreducible SCC is one which has multiple "header" blocks, i.e., blocks
with control-flow edges incident from outside the SCC. This pass converts an
irreducible SCC into a natural loop by introducing a single new header
block and redirecting all the edges on the original headers to this
new block.
This is a useful workaround for a limitation in the structurizer
which, which produces incorrect control flow in the presence of
irreducible regions. The AMDGPU backend provides an option to
enable this pass before the structurizer, which may eventually be
enabled by default.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D77198
This restores commit 2ada8e2525.
Originally reverted with commit 44e09b59b8.
This reverts commit 2ada8e2525.
Buildbots produced compilation errors which I was not able to quickly
reproduce locally. Need more time to investigate.
An irreducible SCC is one which has multiple "header" blocks, i.e., blocks
with control-flow edges incident from outside the SCC. This pass converts an
irreducible SCC into a natural loop by introducing a single new header
block and redirecting all the edges on the original headers to this
new block.
This is a useful workaround for a limitation in the structurizer
which, which produces incorrect control flow in the presence of
irreducible regions. The AMDGPU backend provides an option to
enable this pass before the structurizer, which may eventually be
enabled by default.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D77198
For each natural loop with multiple exit blocks, this pass creates a
new block N such that all exiting blocks now branch to N, and then
control flow is redistributed to all the original exit blocks.
The bulk of the tranformation is a new function introduced in
BasicBlockUtils that an redirect control flow from a set of incoming
blocks to a set of outgoing blocks via a common "hub".
This is a useful workaround for a limitation in the structurizer which
incorrectly orders blocks when processing a nest of loops. This pass
bypasses that issue by ensuring that each natural loop is recognized
as a separate region. Since the structurizer is a region pass, it no
longer sees a nest of loops in a single region, and instead processes
each "level" in the nesting as a separate region.
The AMDGPU backend provides a new option to enable this pass before
the structurizer, which may eventually be enabled by default.
Reviewers: madhur13490, arsenm, nhaehnle
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D75865
Having arbitrary passes looking at the TargetOptions is pretty
messy. This was also disregarding if a function already had an
explicit attribute setting on it. opt/llc now add the attributes to
functions that don't specify the attribute. clang and lld do not call
the function to do this, which they maybe should.
This was also treating unsafe-fp-math as implying the others, and
setting the other attributes based on it. This is not done anywhere
else, and I'm not sure is correct based on the current description of
the option bit.
Effectively reverts 1d8cf2be89
AMDGPUPropagateAttributes can swap names while cloning a function.
Only do it if original symbol was not externally visible.
Differential Revision: https://reviews.llvm.org/D76789
This pass can handle all the optimization
opportunities found just before code emission.
Presently it includes the handling of vcc branch
optimization that was handled earlier in SIInsertSkips.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D76712
Implement the DWARF register mapping described in llvm/docs/AMDGPUUsage.rst.
This enables generating appropriate DWARF register numbers for wave64 and
wave32 modes.
Add the scratch wave offset to the scratch buffer descriptor (SRSrc) in
the entry function prologue. This allows us to removes the scratch wave
offset register from the calling convention ABI.
As part of this change, allow the use of an inline constant zero for the
SOffset of MUBUF instructions accessing the stack in entry functions
when a frame pointer is not requested/required. Entry functions with
calls still need to set up the calling convention ABI stack pointer
register, and reference it in order to address arguments of called
functions. The ABI stack pointer register remains unswizzled, but is now
wave-relative instead of queue-relative.
Non-entry functions also use an inline constant zero SOffset for
wave-relative scratch access, but continue to use the stack and frame
pointers as before. When the stack or frame pointer is converted to a
swizzled offset it is now scaled directly, as the scratch wave offset no
longer needs to be subtracted first.
Update llvm/docs/AMDGPUUsage.rst to reflect these changes to the calling
convention.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75138
The current set of custom combines are only really useful after
legalization, so move them there. There is a lot of overlap in the
boilerplate here, but I think we do want a pretty different set of
combines before and after legalize. I think we will want a lot of
overlap between the post-legalize and a post-regbankselect combiner.
While looking at the output on real sized programs, there is a lot of
extra SGPR spilling compared to the DAG path. This seems to largely be
from all constants being SGPRs in the entry block.
Prepare to accurately track the future denormal-fp-math attribute
changes. The way to actually set these separately is not wired in yet.
This is just a mechanical change, and mostly still assumes the input
and output mode match. This should be refined for some cases. For
example, fcanonicalize lowering should use the flushing variant if
either input or output flushing is enabled
We are relying on atrificial DAG edges inserted by the
MemOpClusterMutation to keep loads and stores together in the
post-RA scheduler. This does not work all the time since it
allows to schedule a completely independent instruction in the
middle of the cluster.
Removed the DAG mutation and added pass to bundle already
clustered instructions. These bundles are unpacked before the
memory legalizer because it does not work with bundles but also
because it allows to insert waitcounts in the middle of a store
cluster.
Removing artificial edges also allows a more relaxed scheduling.
Differential Revision: https://reviews.llvm.org/D72737
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
Summary:
- `dead-mi-elimination` assumes MIR in the SSA form and cannot be
arranged after phi elimination or DeSSA. It's enhanced to handle the
dead register definition by skipping use check on it. Once a register
def is `dead`, all its uses, if any, should be `undef`.
- Re-arrange the DIE in RA phase for AMDGPU by placing it directly after
`detect-dead-lanes`.
- Many relevant tests are refined due to different register assignment.
Reviewers: rampitec, qcolombet, sunfish
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72709
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
The default FP mode should really be a property of a specific
function, and not a subtarget. Introduce the necessary fields to the
SIMachineFunctionInfo to help move towards this goal.
Summary:
This has been superseded by "[AMDGPU]: PHI Elimination hooks added for custom COPY insertion."
This reverts the code changes from commit 53f967f2bd
but keeps the test case.
Reviewers: hliao, arsenm, tpr, dstuttard
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68769
llvm-svn: 374347
SGPR_128 only includes the real allocatable SGPRs, and SReg_128 adds
the additional non-allocatable TTMP registers. There's no point in
allocating SReg_128 vregs. This shrinks the size of the classes
regalloc needs to consider, which is usually good.
llvm-svn: 374284
The mul24 matching could interfere with SLSR and the other addressing
mode related passes. This probably is not the optimal placement, but
is an intermediate step. This should probably be moved after all the
generic IR passes, particularly LSR. Moving this after LSR seems to
help in some cases, and hurts others.
As-is in this patch, in idiv-licm, it saves 1-2 instructions inside
some of the loop bodies, but increases the number in others. Moving
this later helps these loops. In the new lsr tests in
mul24-pass-ordering, the intrinsic prevents introducing more
instructions in the loop preheader, so moving this later ends up
hurting them. This shouldn't be any worse than before the intrinsics
were introduced in r366094, and LSR should probably be smarter. I
think it's because it doesn't know the and inside the loop will be
folded away.
llvm-svn: 369991
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
This pass is a port of the according pass from the HSAIL compiler.
It parses printf calls and setup runtime printf buffer.
After that it copies printf arguments to the buffer and fills in
module metadata for runtime.
Differential Revision: https://reviews.llvm.org/D24035
llvm-svn: 368592
Summary:
- As LCSSA is turned on just before isel, it may create PHI of the flow,
which is consumed by pseudo structurized CFG instructions. When that
PHIs are eliminated in O0, COPY may be placed wrongly as the these
pseudo structurized CFG instructions are considering prologue of MBB.
- Run extra `unreachable-mbb-elimination` at the end of isel to clean up
PHIs.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64353
llvm-svn: 367023
Add a string attribute instead of directly setting
MachineFunctionInfo. This avoids trying to get the analysis in the
MachineFunctionInfo in a way that doesn't work with the new pass
manager.
This will also avoid re-visiting the call graph for every single
function.
llvm-svn: 365241
This is split out from my patches to split register allocation into a
separate SGPR and VGPR phase, and has some parts that aren't yet used
(like maintaining LiveIntervals).
This simplifies making the frame pointer register callee saved. As it
is now, the code to determine callee saves needs to predict all the
possible SGPR spills and how many callee saved VGPRs are needed. By
handling this before PrologEpilogInserter, it's possible to just check
the spill objects that already exist.
Change-Id: I29e6df4034afcf949e06f8ef44206acb94696f04
llvm-svn: 365095
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
AMDGPUPropagateAttributes will not work on function bitcatsts,
so move AMDGPUFixFunctionBitcasts before it.
Differential Revision: https://reviews.llvm.org/D63455
llvm-svn: 363614
The pass works in two modes:
Mode 1: Just set attributes starting from kernels. This can work at
the very beginning of opt and llc pipeline, but cannot clone functions
because it must be a function pass.
Mode 2: Actually clone functions for new attributes. This can only work
after all function passes in the opt pipeline because it has to be a
module pass.
Differential Revision: https://reviews.llvm.org/D63208
llvm-svn: 363586
This reverts r362990 (git commit 374571301d)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360713
Because CodeGen can't depend on GlobalISel, we need a way to encapsulate the CSE
configs that can be passed between TargetPassConfig and the targets' custom
pass configs. This CSEConfigBase allows targets to create custom CSE configs
which is then used by the GISel passes for the CSEMIRBuilder.
This support will be used in a follow up commit to allow constant-only CSE for
-O0 compiles in D60580.
llvm-svn: 358368
Add support for min/max flavor selects in computeConstantRange(),
which allows us to fold comparisons of a min/max against a constant
in InstSimplify. This fixes an infinite InstCombine loop, with the
test case taken from D59378.
Relative to the previous iteration, this contains some adjustments for
AMDGPU med3 tests: The AMDGPU target runs InstSimplify prior to codegen,
which ends up constant folding some existing med3 tests after this
change. To preserve these tests a hidden -amdgpu-scalar-ir-passes option
is added, which allows disabling scalar IR passes (that use InstSimplify)
for testing purposes.
Differential Revision: https://reviews.llvm.org/D59506
llvm-svn: 357870
Detect dead lanes can create some dead defs. Then RenameIndependentSubregs
will break a REG_SEQUENCE which may use these dead defs. At this point
a dead instruction can be removed but we do not run a DCE anymore.
MachineDCE was only running before live variable analysis. The patch
adds a mean to preserve LiveIntervals and SlotIndexes in case it works
past this.
Differential Revision: https://reviews.llvm.org/D59626
llvm-svn: 357805
This change incorporates an effort by Connor Abbot to change how we deal
with WWM operations potentially trashing valid values in inactive lanes.
Previously, the SIFixWWMLiveness pass would work out which registers
were being trashed within WWM regions, and ensure that the register
allocator did not have any values it was depending on resident in those
registers if the WWM section would trash them. This worked perfectly
well, but would cause sometimes severe register pressure when the WWM
section resided before divergent control flow (or at least that is where
I mostly observed it).
This fix instead runs through the WWM sections and pre allocates some
registers for WWM. It then reserves these registers so that the register
allocator cannot use them. This results in a significant register
saving on some WWM shaders I'm working with (130 -> 104 VGPRs, with just
this change!).
Differential Revision: https://reviews.llvm.org/D59295
llvm-svn: 357400
Also includes one example of how this transform is unsound. This isn't
verifying the copies are used in the control flow intrinisic patterns.
Also add option to disable exec mask opt pass. Since this pass is
unsound, it may be useful to turn it off until it is fixed.
llvm-svn: 357091
This will allow targets more flexibility to replace the
register allocator core passes. In a future commit,
AMDGPU will run the core register assignment passes
twice, and will also want to disallow using the
standard -regalloc option.
llvm-svn: 356506
Add an experimental buffer fat pointer address space that is currently
unhandled in the backend. This commit reserves address space 7 as a
non-integral pointer repsenting the 160-bit fat pointer (128-bit buffer
descriptor + 32-bit offset) that is heavily used in graphics workloads
using the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D58957
llvm-svn: 356373
There are a few different issues, mostly stemming from using
generation based checks for anything instead of subtarget
features. Stop adding flat-address-space as a feature for HSA, as it
should only be a device property. This was incorrectly allowing flat
instructions to select for SI.
Increase the default generation for HSA to avoid the encoding error
when emitting objects. This has some other side effects from various
checks which probably should be separate subtarget features (in the
cost model and for dealing with the DS offset folding issue).
Partial fix for bug 41070. It should probably be an error to try using
amdhsa without flat support.
llvm-svn: 356347
This has been a very painful missing feature that has made producing
reduced testcases difficult. In particular the various registers
determined for stack access during function lowering were necessary to
avoid undefined register errors in a large percentage of
cases. Implement a subset of the important fields that need to be
preserved for AMDGPU.
Most of the changes are to support targets parsing register fields and
properly reporting errors. The biggest sort-of bug remaining is for
fields that can be initialized from the IR section will be overwritten
by a default initialized machineFunctionInfo section. Another
remaining bug is the machineFunctionInfo section is still printed even
if empty.
llvm-svn: 356215
A previous patch for "uniform-work-group-size" attribute was found to break
some RADV and possibly radeon SI tests and had to be retracted.
This patch fixes that.
Differential Revision: http://reviews.llvm.org/D58993
llvm-svn: 355574
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
This re-submit of the change also includes a slight modification in
SIISelLowering.cpp to work-around a compiler bug for the powerpc_le
platform that caused a buildbot failure on a previous submission.
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
Work around for ppcle compiler bug
Change-Id: Ie284cf24b2271215be1b9dc95b485fd15000e32b
llvm-svn: 351054
Updated the annotate-kernel-features pass to support the propagation of uniform-work-group attribute from the kernel to the called functions. Once this pass is run, all kernels, even the ones which initially did not have the attribute, will be able to indicate weather or not they have uniform work group size depending on the value of the attribute.
Differential Revision: https://reviews.llvm.org/D50200
llvm-svn: 348971
A new pass to manage the Mode register.
Currently this just manages the floating point double precision
rounding requirements, but is intended to be easily extended to
encompass all Mode register settings.
The immediate motivation comes from the requirement to use the
round-to-zero rounding mode for the 16 bit interpolation
instructions, where the rounding mode setting is shared between
16 and 64 bit operations.
llvm-svn: 348754
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
Add a pass to fixup various vector ISel issues.
Currently we handle converting GLOBAL_{LOAD|STORE}_*
and GLOBAL_Atomic_* instructions into their _SADDR variants.
This involves feeding the sreg into the saddr field of the new instruction.
llvm-svn: 347008
This allows testing AMDGPU alias analysis like any
other alias analysis pass. This fixes the existing
test pointlessly running opt -O3 when it really
just wants to run the one analysis.
Before there was no way to test this using -aa-eval
with opt, since the default constructed pass
is run. The wrapper subclass allows the
default constructor to pass the necessary callback.
llvm-svn: 346353
Summary:
Instead of writing boolean values temporarily into 32-bit VGPRs
if they are involved in PHIs or are observed from outside a loop,
we use bitwise masking operations to combine lane masks in a way
that is consistent with wave control flow.
Move SIFixSGPRCopies to before this pass, since that pass
incorrectly attempts to move SGPR phis to VGPRs.
This should recover most of the code quality that was lost with
the bug fix in "AMDGPU: Remove PHI loop condition optimization".
There are still some relevant cases where code quality could be
improved, in particular:
- We often introduce redundant masks with EXEC. Ideally, we'd
have a generic computeKnownBits-like analysis to determine
whether masks are already masked by EXEC, so we can avoid this
masking both here and when lowering uniform control flow.
- The criterion we use to determine whether a def is observed
from outside a loop is conservative: it doesn't check whether
(loop) branch conditions are uniform.
Change-Id: Ibabdb373a7510e426b90deef00f5e16c5d56e64b
Reviewers: arsenm, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, mgorny, yaxunl, dstuttard, t-tye, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53496
llvm-svn: 345719
AMDGPU currently only supports direct calls, but at lower optimisation levels it
fails to lower statically direct calls which appear indirect due to a bitcast.
Add a pass to visit all CallSites and use CallPromotionUtils to "devirtualize"
calls.
Differential Revision: https://reviews.llvm.org/D52741
llvm-svn: 345382
This commit adds a new IR level pass to the AMDGPU backend to perform
atomic optimizations. It works by:
- Running through a function and finding atomicrmw add/sub or uses of
the atomic buffer intrinsics for add/sub.
- If all arguments except the value to be added/subtracted are uniform,
record the value to be optimized.
- Run through the atomic operations we can optimize and, depending on
whether the value is uniform/divergent use wavefront wide operations
(DPP in the divergent case) to calculate the total amount to be
atomically added/subtracted.
- Then let only a single lane of each wavefront perform the atomic
operation, reducing the total number of atomic operations in flight.
- Lastly we recombine the result from the single lane to each lane of
the wavefront, and calculate our individual lanes offset into the
final result.
Differential Revision: https://reviews.llvm.org/D51969
llvm-svn: 343973
[AMDGPU] lower-switch in preISel as a workaround for legacy DA
Summary:
The default target of the switch instruction may sometimes be an
"unreachable" block, when it is guaranteed that one of the cases is
always taken. The dominator tree concludes that such a switch
instruction does not have an immediate post dominator. This confuses
divergence analysis, which is unable to propagate sync dependence to
the targets of the switch instruction.
As a workaround, the AMDGPU target now invokes lower-switch as a
preISel pass. LowerSwitch is designed to handle the unreachable
default target correctly, allowing the divergence analysis to locate
the correct immediate dominator of the now-lowered switch.
llvm-svn: 342956
Summary:
The default target of the switch instruction may sometimes be an
"unreachable" block, when it is guaranteed that one of the cases is
always taken. The dominator tree concludes that such a switch
instruction does not have an immediate post dominator. This confuses
divergence analysis, which is unable to propagate sync dependence to
the targets of the switch instruction.
As a workaround, the AMDGPU target now invokes lower-switch as a
preISel pass. LowerSwitch is designed to handle the unreachable
default target correctly, allowing the divergence analysis to locate
the correct immediate dominator of the now-lowered switch.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits, simoll
Differential Revision: https://reviews.llvm.org/D52221
llvm-svn: 342722
Memory legalizer, waitcnt, and shrink passes can perturb the instructions,
which means that the post-RA hazard recognizer pass should run after them.
Otherwise, one of those passes may invalidate the work done by the hazard
recognizer. Note that this has adverse side-effect that any consecutive
S_NOP 0's, emitted by the hazard recognizer, will not be shrunk into a
single S_NOP <N>. This should be addressed in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D49288
llvm-svn: 337154
Summary:
This is a follow-up to r335942.
- Merge SISubtarget into AMDGPUSubtarget and rename to GCNSubtarget
- Rename AMDGPUCommonSubtarget to AMDGPUSubtarget
- Merge R600Subtarget::Generation and GCNSubtarget::Generation into
AMDGPUSubtarget::Generation.
Reviewers: arsenm, jvesely
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49037
llvm-svn: 336851
These won't work for the forseeable future. These aren't allowed
from OpenCL, but IPO optimizations can make them appear.
Also directly set the attributes on functions, regardless
of the linkage rather than cloning functions like before.
llvm-svn: 336587
This allows to hoist code portion to compute reciprocal of loop
invariant denominator in integer division after codegen prepare
expansion.
Differential Revision: https://reviews.llvm.org/D48604
llvm-svn: 335988
This replaces most argument uses with loads, but for
now not all.
The code in SelectionDAG for calling convention lowering
is actively harmful for amdgpu_kernel. It attempts to
split the argument types into register legal types, which
results in low quality code for arbitary types. Since
all kernel arguments are passed in memory, we just want the
raw types.
I've tried a couple of methods of mitigating this in SelectionDAG,
but it's easier to just bypass this problem alltogether. It's
possible to hack around the problem in the initial lowering,
but the real problem is the DAG then expects to be able to use
CopyToReg/CopyFromReg for uses of the arguments outside the block.
Exposing the argument loads in the IR also has the advantage
that the LoadStoreVectorizer can merge them.
I'm not sure the best approach to dealing with the IR
argument list is. The patch as-is just leaves the IR arguments
in place, so all the existing code will still compute the same
kernarg size and pointlessly lowers the arguments.
Arguably the frontend should emit kernels with an empty argument
list in the first place. Alternatively a dummy array could be
inserted as a single argument just to reserve space.
This does have some disadvantages. Local pointer kernel arguments can
no longer have AssertZext placed on them as the equivalent !range
metadata is not valid on pointer typed loads. This is mostly bad
for SI which needs to know about the known bits in order to use the
DS instruction offset, so in this case this is not done.
More importantly, this skips noalias arguments since this pass
does not yet convert this to the equivalent !alias.scope and !noalias
metadata. Producing this metadata correctly seems to be tricky,
although this logically is the same as inlining into a function which
doesn't exist. Additionally, exposing these loads to the vectorizer
may result in degraded aliasing information if a pointer load is
merged with another argument load.
I'm also not entirely sure this is preserving the current clover
ABI, although I would greatly prefer if it would stop widening
arguments and match the HSA ABI. As-is I think it is extending
< 4-byte arguments to 4-bytes but doesn't align them to 4-bytes.
llvm-svn: 335650
Memory clauses are formed into bundles in presence of xnack.
Their source operands are marked as early-clobber.
This allows to allocate distinct source and destination registers
within a clause and prevent breaking the clause with s_nop in the
hazard recognizer.
Clauses are undone before post-RA scheduler to allow some rescheduling,
which will not break the clause since artificial edges are created in
the dag to keep memory operations together. Yet this allows a better
ILP in some cases.
Differential Revision: https://reviews.llvm.org/D47511
llvm-svn: 333691
With the removal of the old waitcnt pass, the '-enable-si-insert-waitcnts' option is obsolete. Remove it.
Differential Revision: https://reviews.llvm.org/D47378
llvm-svn: 333303
Eliminate loads from the dispatch packet when they will have
a known value.
Also pattern match the code used by the library to handle partial
workgroup dispatches, which isn't necessary if reqd_work_group_size
is used.
llvm-svn: 332771
This pass is
a) broken.
b) r600 specific.
Fixing (a) is a bit more non-trivial, but fixing (b)
is easy. Move this pass to being R600 only for now.
This pass does pass all the unit tests, however clang
no longer generates code that looks like the unit test
input, so fixing the pass requires fixing the tests and
the pass as one, and checking it works with clang still.
Patch by Dave Airlie
llvm-svn: 332196
Remove the old waitcnt pass ( si-insert-waits ), which is no longer maintained
and getting crufty
Differential Revision: https://reviews.llvm.org/D46448
llvm-svn: 331641
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
This fixes AMDGPU GlobalISel test failures when enabling the AMDGPU
target without any other targets that use GlobalISel.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, rovka, kristof.beyls, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D45353
llvm-svn: 329588
Note: This is a candidate for LLVM 6.0, because it was planned to be
in that release but was delayed due to a long review period.
Merge conflict in release_60 - resolution:
Add "-p6:32:32" into the second (non-amdgiz) string.
Only scalar loads support 32-bit pointers. An address in a VGPR will
fail to compile. That's OK because the results of loads will only be used
in places where VGPRs are forbidden.
Updated AMDGPUAliasAnalysis and used SReg_64_XEXEC.
The tests cover all uses cases we need for Mesa.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D41651
llvm-svn: 324487
1. Run the memory legalizer prior to the waitcnt pass; keep the policy that the waitcnt pass does not remove any waitcnts within the incoming IR.
2. The waitcnt pass doesn't (yet) track waitcnts that exist prior to the waitcnt pass (it just skips over them); because the waitcnt pass is ignorant of them, it may insert a redundant waitcnt. To avoid this, check the prev instr. If it and the to-be-inserted waitcnt are the same, suppress the insertion. We keep the existing waitcnt under the assumption that whomever, e.g., the memory legalizer, inserted it knows what they were doing.
3. Follow-on work: teach the waitcnt pass to record the pre-existing waitcnts for better waitcnt production.
Differential Revision: https://reviews.llvm.org/D42854
llvm-svn: 324440
This avoids playing games with pseudo pass IDs and avoids using an
unreliable MRI::isSSA() check to determine whether register allocation
has happened.
Note that this renames:
- MachineLICMID -> EarlyMachineLICM
- PostRAMachineLICMID -> MachineLICMID
to be consistent with the EarlyTailDuplicate/TailDuplicate naming.
llvm-svn: 322927
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
Summary:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321234
Arthur Eubanks