hashable data. This matters when we have pair<T*, U*> as a key, which is
quite common in DenseMap, etc. To that end, we need to detect when this
is safe. The requirements on a generic std::pair<T, U> are:
1) Both T and U must satisfy the existing is_hashable_data trait. Note
that this includes the requirement that T and U have no internal
padding bits or other bits not contributing directly to equality.
2) The alignment constraints of std::pair<T, U> do not require padding
between consecutive objects.
3) The alignment constraints of U and the size of T do not conspire to
require padding between the first and second elements.
Grow two somewhat magical traits to detect this by forming a pod
structure and inspecting offset artifacts on it. Hopefully this won't
cause any compilers to panic.
Added and adjusted tests now that pairs, even nested pairs, are treated
as just sequences of data.
Thanks to Jeffrey Yasskin for helping me sort through this and reviewing
the somewhat subtle traits.
llvm-svn: 151883
an open question of whether we can do better than this by treating pairs
as boring data containers and directly hashing the two subobjects. This
at least makes the API reasonable.
In order to make this change, I reorganized the header a bit. I lifted
the declarations of the hash_value functions up to the top of the header
with their doxygen comments as these are intended for users to interact
with. They shouldn't have to wade through implementation details. I then
defined them at the very end so that they could be defined in terms of
hash_combine or any other hashing infrastructure.
Added various pair-hashing unittests.
llvm-svn: 151882
the hash_code. I'm not sure what I was thinking here, the use cases for
special values are in the *keys*, not in the hashes of those keys.
We can always resurrect this if needed, or clients can accomplish the
same goal themselves. This makes the general case somewhat faster (~5
cycles faster on my machine) and smaller with less branching.
llvm-svn: 151865
of the proposed standard hashing interfaces (N3333), and to use
a modified and tuned version of the CityHash algorithm.
Some of the highlights of this change:
-- Significantly higher quality hashing algorithm with very well
distributed results, and extremely few collisions. Should be close to
a checksum for up to 64-bit keys. Very little clustering or clumping of
hash codes, to better distribute load on probed hash tables.
-- Built-in support for reserved values.
-- Simplified API that composes cleanly with other C++ idioms and APIs.
-- Better scaling performance as keys grow. This is the fastest
algorithm I've found and measured for moderately sized keys (such as
show up in some of the uniquing and folding use cases)
-- Support for enabling per-execution seeds to prevent table ordering
or other artifacts of hashing algorithms to impact the output of
LLVM. The seeding would make each run different and highlight these
problems during bootstrap.
This implementation was tested extensively using the SMHasher test
suite, and pased with flying colors, doing better than the original
CityHash algorithm even.
I've included a unittest, although it is somewhat minimal at the moment.
I've also added (or refactored into the proper location) type traits
necessary to implement this, and converted users of GeneralHash over.
My only immediate concerns with this implementation is the performance
of hashing small keys. I've already started working to improve this, and
will continue to do so. Currently, the only algorithms faster produce
lower quality results, but it is likely there is a better compromise
than the current one.
Many thanks to Jeffrey Yasskin who did most of the work on the N3333
paper, pair-programmed some of this code, and reviewed much of it. Many
thanks also go to Geoff Pike Pike and Jyrki Alakuijala, the original
authors of CityHash on which this is heavily based, and Austin Appleby
who created MurmurHash and the SMHasher test suite.
Also thanks to Nadav, Tobias, Howard, Jay, Nick, Ahmed, and Duncan for
all of the review comments! If there are further comments or concerns,
please let me know and I'll jump on 'em.
llvm-svn: 151822
Allows us to de-virtualize the function and provides access to it in
the instruction printer, which is useful for handling composite
physical registers (e.g., ARM register lists).
llvm-svn: 151815
This allows us to make TRC non-polymorphic and value-initializable, eliminating a huge static
initializer and a ton of cruft from the generated code.
Shrinks ARMBaseRegisterInfo.o by ~100k.
llvm-svn: 151806
Simply treat bundles as instructions. Spill code is inserted between
bundles, never inside a bundle. Rewrite all operands in a bundle at
once.
Don't attempt and memory operand folding inside bundles.
llvm-svn: 151787
* Add begin_dynamic_table() / end_dynamic_table() private interface to ELFObjectFile.
* Add begin_libraries_needed() / end_libraries_needed() interface to ObjectFile, for grabbing the list of needed libraries for a shared object or dynamic executable.
* Implement this new interface completely for ELF, leave stubs for COFF and MachO.
* Add 'llvm-readobj' tool for dumping ObjectFile information.
llvm-svn: 151785
This allows the function to be inlined, and makes it suitable for use in
getInstructionIndex().
Also provide a const version. C++ is great for touch typing practice.
llvm-svn: 151782
std::vector.
- Good for 1-2% speedup on writing PCH for Cocoa.h.
- Clang side API match to follow shortly, there wasn't an easy way to make this
non-breaking.
llvm-svn: 151750
Rename ST_External to ST_Unknown, and slightly change its semantics. It now only indicates that the symbol's type
is unknown, not that the symbol is undefined. (For that, use ST_Undefined).
llvm-svn: 151696
This function does more or less the same as
MI::readsWritesVirtualRegister(), but it supports bundles as well.
It also determines if any constraint requires reading and writing
operands to use the same register. Most clients want to know.
Use the more modern MO.readsReg() instead of trying to sort out undefs
and partial redefines. Stop supporting the extra full <imp-def> operand
as an alternative to <def,undef> sub-register defines.
llvm-svn: 151690
Extract a base class and provide four specific sub-classes for iterating
over const/non-const bundles/instructions.
This eliminates the mystery bool constructor argument.
llvm-svn: 151684
SlotIndexes are not assigned to instructions inside bundles, but it is
still valid to look up the index of those instructions.
The reverse getInstructionFromIndex() will return the first instruction
in the bundle.
llvm-svn: 151672
debug info for assembly files. We were already doing the right thing when
producing debug info for C/C++.
ELF linkers don't know dwarf, so they depend on these relocations to produce
valid dwarf output.
llvm-svn: 151655
the processor keeps a return addresses stack (RAS) which stores the address
and the instruction execution state of the instruction after a function-call
type branch instruction.
Calling a "noreturn" function with normal call instructions (e.g. bl) can
corrupt RAS and causes 100% return misprediction so LLVM should use a
unconditional branch instead. i.e.
mov lr, pc
b _foo
The "mov lr, pc" is issued in order to get proper backtrace.
rdar://8979299
llvm-svn: 151623
We on the linker to resolve calls to the appropriate BL/BLX instruction
to make interworking function correctly. It uses the symbol in the
relocation to do that, so we need to be careful about being too clever.
To enable this for ARM mode, split the BL/BLX fixup kind off from the
unconditional-branch fixups.
rdar://10927209
llvm-svn: 151571
The MIOperands iterator can visit operands on a single instruction, or
all operands in a bundle. This simplifies code like the register
allocator that treats bundles as a set of operands.
llvm-svn: 151529
verifier does. This correctly handles invoke.
Thanks to Duncan, Andrew and Chris for the comments.
Thanks to Joerg for the early testing.
llvm-svn: 151469
are optimization hints, but at -O0 we're not optimizing. This becomes a problem
when the alwaysinline attribute is abused.
rdar://10921594
llvm-svn: 151429
it with memcpy. This also fixes a problem on big-endian hosts, where
addUnaligned would return different results depending on the alignment
of the data.
llvm-svn: 151247
The standard function epilog includes a .size directive, but ppc64 uses
an alternate local symbol to tag the actual start of each function.
Until recently, binutils accepted the .size directive as:
.size test1, .Ltmp0-test1
however, using this directive with recent binutils will result in the error:
.size expression for XXX does not evaluate to a constant
so we must use the label which actually tags the start of the function.
llvm-svn: 151200
Add some data structures to represent for loops. These will be
referenced during object processing to do any needed iteration and
instantiation.
Add foreach keyword support to the lexer.
Add a mode to indicate that we're parsing a foreach loop. This allows
the value parser to early-out when processing the foreach value list.
Add a routine to parse foreach iteration declarations. This is
separate from ParseDeclaration because the type of the named value
(the iterator) doesn't match the type of the initializer value (the
value list). It also needs to add two values to the foreach record:
the iterator and the value list.
Add parsing support for foreach.
Add the code to process foreach loops and create defs based
on iterator values.
Allow foreach loops to be matched at the top level.
When parsing an IDValue check if it is a foreach loop iterator for one
of the active loops. If so, return a VarInit for it.
Add Emacs keyword support for foreach.
Add VIM keyword support for foreach.
Add tests to check foreach operation.
Add TableGen documentation for foreach.
Support foreach with multiple objects.
Support non-braced foreach body with one object.
Do not require types for the foreach declaration. Assume the iterator
type from the iteration list element type.
llvm-svn: 151164
chip in r139383, and the PSP components of the triple are really
annoying to parse. Let's leave this chapter behind. There is no reason
to expect LLVM to see a PSP-related triple these days, and so no
reasonable motivation to support them.
It might be reasonable to prune a few of the older MIPS triple forms in
general, but as those at least cause no burden on parsing (they aren't
both a chip and an OS!), I'm happy to leave them in for now.
llvm-svn: 151156
Affect on SD scheduling and postRA scheduling:
Printing the DAG will display the nodes in top-down topological order.
This matches the order within the MBB and makes my life much easier in general.
Affect on misched:
We don't need to track virtual register uses at all. This is awesome.
I also intend to rely on the SUnit ID as a topo-sort index. So if A < B then we cannot have an edge B -> A.
llvm-svn: 151135
For objects that can be identified by small unsigned keys, SparseSet
provides constant time clear() and fast deterministic iteration. Insert,
erase, and find operations are typically faster than hash tables.
SparseSet is useful for keeping information about physical registers,
virtual registers, or numbered basic blocks.
llvm-svn: 151110
bundles. This method takes a bundle start and an MI being bundled, and makes
the intervals for the MI's operands appear to start/end on the bundle start.
Also fixes some minor cosmetic issues (whitespace, naming convention) in the
HMEditor code.
llvm-svn: 151099
They're private static methods but we can just make them static
functions in the implementation. It makes the implementations a touch
more wordy, but takes another chunk out of the header file.
Also, take the opportunity to switch the names to the new coding
conventions.
No functionality changed here.
llvm-svn: 151047
Passes after RegAlloc should be able to rely on MRI->getNumVirtRegs() == 0.
This makes sharing code for pre/postRA passes more robust.
Now, to check if a pass is running before the RA pipeline begins, use MRI->isSSA().
To check if a pass is running after the RA pipeline ends, use !MRI->getNumVirtRegs().
PEI resets virtual regs when it's done scavenging.
PTX will either have to provide its own PEI pass or assign physregs.
llvm-svn: 151032
construction. Simplify its interface, implementation, and users
accordingly as there is no longer an 'uninitialized' state to check for.
Also, fixes a bug lurking in the interface as there was one method that
didn't correctly check for initialization.
llvm-svn: 151024
MRI keeps track of which physregs have been used. Make sure it gets
updated with all the regmask-clobbered registers.
Delete the closePhysRegsUsed() function which isn't necessary.
llvm-svn: 150830
metadata may still unwind, but only in ways that the ARC
optimizer doesn't need to consider. This permits more
aggressive optimization.
llvm-svn: 150829
any changes.
Internally this adds a private inner class HMEditor, to LiveIntervals. HMEditor provides
an API for updating live intervals when code is moved or bundled.
llvm-svn: 150826
Fix the type of eh_frame on Solaris so that Sun ld doesn't fail to combine them (thus making it impossible for the unwind library to find them and breaking exceptions).
llvm-svn: 150814
The existing framework for postra scheduling is library local. We want to keep it that way. Soon we will have a more general MachineScheduler interface. At that time, various bits will be exposed to targets. In the meantime, the VLIWPacketizer wants to use ScheduleDAGInstrs directly, so it needs to wrapped in a PIMPL to avoid exposing it to the target interface.
llvm-svn: 150633
method. This allows the target lowering code to not have to deal with MDNodes.
Also, avoid leaking memory like a sieve by not creating a global variable for
the image info section, but just emitting the code directly.
llvm-svn: 150624
Accomplished by moving the body of StringRef::edit_distance into
a separate function that accepts two ArrayRefs, and making
StringRef::edit_distance a wrapper around the new function.
llvm-svn: 150621
The llc command line options for enabling/disabling passes are local to CodeGen/Passes.cpp. This patch associates those options with standard pass IDs so they work regardless of how the target configures the passes.
A target has two ways of overriding standard passes:
1) Redefine the pass pipeline (override TargetPassConfig::add%Stage)
2) Replace or suppress individiual passes with TargetPassConfig::substitutePass.
In both cases, the command line options associated with the pass override the target default.
For example, say a target wants to disable machine instruction scheduling by default:
- The target calls disablePass(MachineSchedulerID) but otherwise does not override any TargetPassConfig methods.
- Without any llc options, no scheduler is run.
- With -enable-misched, the standard machine scheduler is run and honors the -misched=... flag to select the scheduler variant, which may be used for performance evaluation or testing.
Sorry overridePass is ugly. I haven't thought of a better way without replacing the cl::opt framework. I hope to do that one day...
I haven't figured out why CodeGen uses char& for pass IDs. AnalysisID is much easier to use and less bug prone. I'm using it wherever I can for internal implementation. Maybe later we can change the global pass ID definitions as well.
llvm-svn: 150563
Only accept register masks when looking for an 'overlapping' def. When
Overlap is not set, the function searches for a proper definition of
Reg.
This means MI->modifiesRegister() considers register masks, but
MI->definesRegister() doesn't.
llvm-svn: 150529
The MachO back-end needs to emit the garbage collection flags specified in the
module flags. This is a WIP, so the front-end hasn't been modified to emit these
flags just yet. Documentation and front-end switching to occur soon.
llvm-svn: 150507
This is useful for clients that want to maintain compatibility
across multiple releases of LLVM. Currently users like Klee and
Mesa all have to roll their own 'parse llvm-config --version
output and generate defines' solution.
Also reuse the new macros so that version information is less
redundant/likely to fall out of sync again in the future.
llvm-svn: 150405
- Use unsigned literals when the desired result is unsigned. This mostly allows unsigned/signed mismatch warnings to be less noisy even if they aren't on by default.
- Remove misplaced llvm_unreachable.
- Add static to a declaration of a function on MSVC x86 only.
- Change some instances of calling a static function through a variable to simply calling that function while removing the unused variable.
llvm-svn: 150364
to what's done for MachO and COFF. This allows advanced uses of the class to
be implemented outside the Object library. In particular, the DyldELFObject
subclass is now moved into its logical home - ExecutionEngine/RuntimeDyld.
This patch was reviewed by Michael Spencer.
llvm-svn: 150327
Module flags are key-value pairs associated with the module. They include a
'behavior' value, indicating how module flags react when mergine two
files. Normally, it's just the union of the two module flags. But if two module
flags have the same key, then the resulting flags are dictated by the behaviors.
Allowable behaviors are:
Error
Emits an error if two values disagree.
Warning
Emits a warning if two values disagree.
Require
Emits an error when the specified value is not present
or doesn't have the specified value. It is an error for
two (or more) llvm.module.flags with the same ID to have
the Require behavior but different values. There may be
multiple Require flags per ID.
Override
Uses the specified value if the two values disagree. It
is an error for two (or more) llvm.module.flags with the
same ID to have the Override behavior but different
values.
llvm-svn: 150300
In case the MachineScheduling pass I'm working on doesn't work well
for another target, they can completely override it. This also adds a
hook immediately after the RegAlloc pass to cleanup immediately after
vregs go away. We may want to fold it into the postRA hook later.
llvm-svn: 150298
It can be necessary to detach a register mask pointer from its
MachineOperand. This method is convenient for checking clobbered
physregs on a detached bitmask pointer.
llvm-svn: 150261
These query functions are safe for external use and, furthermore,
are the only way to make queries against the "unknown instructions" array.
BBVectorize will use these functions.
llvm-svn: 150248
is that patterns no longer match for vectors of booleans, because you only get
ConstantDataVector when the vector element type is i8, i16, etc, not when it is
i1). Original commit message:
Remove some dead code and tidy things up now that vectors use ConstantDataVector
instead of always using ConstantVector.
llvm-svn: 150246
Make them accessible through MCInstrInfo. They are only used for debugging purposes so this doesn't
have an impact on performance. X86MCTargetDesc.o goes from 630K to 461K on x86_64.
llvm-svn: 150245
Creates a configurable regalloc pipeline.
Ensure specific llc options do what they say and nothing more: -reglloc=... has no effect other than selecting the allocator pass itself. This patch introduces a new umbrella flag, "-optimize-regalloc", to enable/disable the optimizing regalloc "superpass". This allows for example testing coalscing and scheduling under -O0 or vice-versa.
When a CodeGen pass requires the MachineFunction to have a particular property, we need to explicitly define that property so it can be directly queried rather than naming a specific Pass. For example, to check for SSA, use MRI->isSSA, not addRequired<PHIElimination>.
CodeGen transformation passes are never "required" as an analysis
ProcessImplicitDefs does not require LiveVariables.
We have a plan to massively simplify some of the early passes within the regalloc superpass.
llvm-svn: 150226
Unify default construction of error_code uses on this idiom so that users don't
feel compelled to make static globals for naming convenience. (unfortunately I
couldn't make the original ctor private as some APIs don't return their result,
instead using an out parameter (that makes sense to default construct) - which
is a bit of a pity. I did, however, find/fix some cases of unnecessary default
construction of error_code before I hit the unfixable cases)
llvm-svn: 150197
Moving toward a uniform style of pass definition to allow easier target configuration.
Globally declare Pass ID.
Globally declare pass initializer.
Use INITIALIZE_PASS consistently.
Add a call to the initializer from CodeGen.cpp.
Remove redundant "createPass" functions and "getPassName" methods.
While cleaning up declarations, cleaned up comments (sorry for large diff).
llvm-svn: 150100
Build an ordered vector of register mask operands (i.e., calls) when
computing live intervals. Provide a checkRegMaskInterference() function
that computes a bit mask of usable registers for a live range.
This is a quick way of determining of a live range crosses any calls,
and restricting it to the callee saved registers if it does.
Previously, we had to discover call clobbers for each candidate register
independently.
llvm-svn: 150077
LiveIntervalAnalysis has a number of functions that simply forward to
SlotIndexes. Since SlotIndexes is a stand-alone analysis now, clients
should really refer to it directly.
llvm-svn: 149921
This CL delays reading of function bodies from initial parse until
materialization, allowing overlap of compilation with bitcode download.
llvm-svn: 149918
convert at least one client over to use them. Subsequent patches both to
LLVM and Clang will try to convert more people over to a common set of
predicates.
This round of predicates is focused on OS-categorization predicates.
llvm-svn: 149815
but with a critical fix to the SelectionDAG code that optimizes copies
from strings into immediate stores: the previous code was stopping reading
string data at the first nul. Address this by adding a new argument to
llvm::getConstantStringInfo, preserving the behavior before the patch.
llvm-svn: 149800
A live range that has an early clobber tied redef now looks like a
normal tied redef, except the early clobber def uses the early clobber
slot.
This is enough to handle any strange interference problems.
llvm-svn: 149769
If a value is defined by a COPY, that instuction can easily and cheaply
be found by getInstructionFromIndex(VNI->def).
This reduces the size of VNInfo from 24 to 16 bytes, and improves
llc compile time by 3%.
llvm-svn: 149763
Passes prior to instructon selection are now split into separate configurable stages.
Header dependencies are simplified.
The bulk of this diff is simply removal of the silly DisableVerify flags.
Sorry for the target header churn. Attempting to stabilize them.
llvm-svn: 149754
Calls that use register mask operands don't have implicit defs for
returned values. The register mask operand handles the call clobber,
but it always behaves like a set of dead defs.
Add live implicit defs for any implicitly defined physregs that are
actually used.
llvm-svn: 149715
Allows command line overrides to be centralized in LLVMTargetMachine.cpp.
LLVMTargetMachine can intercept common passes and give precedence to command line overrides.
Allows adding "internal" target configuration options without touching TargetOptions.
Encapsulates the PassManager.
Provides a good point to initialize all CodeGen passes so that Pass ID's can be used in APIs.
Allows modifying the target configuration hooks without rebuilding the world.
llvm-svn: 149672
needed to emit a 64-bit gp-relative relocation entry. Make changes necessary
for emitting jump tables which have entries with directive .gpdword. This patch
does not implement the parts needed for direct object emission or JIT.
llvm-svn: 149668
PHI nodes which were matched, rather than climbing up the
original PHI node's operands to rediscover PHI nodes for
recording, since the PHI nodes found that are not
necessarily part of the matched set.
This fixes rdar://10589171.
llvm-svn: 149654
that just uses the new toolchain probing logic. This fixes linking with -m32 on
64 bit systems (the /32 dir was not being added to the search).
llvm-svn: 149651
It is simpler to define a composite index directly:
def ssub_2 : SubRegIndex<[dsub_1, ssub_0]>;
def ssub_3 : SubRegIndex<[dsub_1, ssub_1]>;
Than specifying the composite indices on each register:
CompositeIndices = [(ssub_2 dsub_1, ssub_0),
(ssub_3 dsub_1, ssub_1)] in ...
This also makes it clear that SubRegIndex composition is supposed to be
unique.
llvm-svn: 149556
This new scheduler plugs into the existing selection DAG scheduling framework. It is a top-down critical path scheduler that tracks register pressure and uses a DFA for pipeline modeling.
Patch by Sergei Larin!
llvm-svn: 149547
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
llvm-svn: 149481
The pass pointer should never be referenced after sending it to
schedulePass(), which may delete the pass. To fix this bug I had to
clean up the design leading to more goodness.
You may notice now that any non-analysis pass is printed. So things like loop-simplify and lcssa show up, while target lib, target data, alias analysis do not show up. Normally, analysis don't mutate the IR, but you can now check this by using both -print-after and -print-before. The effects of analysis will now show up in between the two.
The llc path is still in bad shape. But I'll be improving it in my next checkin. Meanwhile, print-machineinstrs still works the same way. With print-before/after, many llc passes that were not printed before now are, some of these should be converted to analysis. A few very important passes, isel and scheduler, are not properly initialized, so not printed.
llvm-svn: 149480
This is the initial checkin of the basic-block autovectorization pass along with some supporting vectorization infrastructure.
Special thanks to everyone who helped review this code over the last several months (especially Tobias Grosser).
llvm-svn: 149468
now that this handles the release / retain calls.
Adds a regression test for that bug (which is a compile-time
regression) and for the last two changes to the IntrusiveRefCntPtr,
especially tests for the memory leak due to copy construction of the
ref-counted object and ensuring that the traits are used for release /
retain calls.
llvm-svn: 149411
kicking in the big win of ConstantDataArray. As part of this, change
the implementation of GetConstantStringInfo in ValueTracking to work
with ConstantDataArray (and not ConstantArray) making it dramatically,
amazingly, more efficient in the process and renaming it to
getConstantStringInfo.
This keeps around a GetConstantStringInfo entrypoint that (grossly)
forwards to getConstantStringInfo and constructs the std::string
required, but existing clients should move over to
getConstantStringInfo instead.
llvm-svn: 149351
- Don't call malloc+free in the very hot forward().
- Don't call isTiedToDefOperand().
- Don't create BitVector temporaries.
- Merge DeadRegs into KillRegs.
- Eliminate the early clobber checks, they were irrelevant to scavenging.
- Remove unnecessary code from -Asserts builds.
This speeds up ARM PEI by 3.4x and overall llc -O0 codegen time by 11%.
llvm-svn: 149189
around within a basic block while maintaining live-intervals.
Updated ScheduleTopDownLive in MachineScheduler.cpp to use the moveInstr API
when reordering MIs.
llvm-svn: 149147
we're at it, allow PatternMatch's "neg" pattern to match integer
vector negations, and enhance ComputeNumSigned bits to handle
shl of vectors.
llvm-svn: 149082
The live range of the source register may be extended when a redundant
copy is eliminated. Make sure any kill flags between the two copies are
cleared.
This fixes PR11765.
llvm-svn: 149069
This enables the linker to match concrete relocation types (absolute or relative) with whatever library or C++ support code is being linked against.
llvm-svn: 149057
ConstantVector. Fix some outright bugs in the implementation of
ConstantArray and Constant struct, which would cause us to not make
one big UndefValue when asking for an array/struct with all undef
elements. Enhance Constant::isAllOnesValue to work with
ConstantDataVector.
llvm-svn: 149021
to reduce the number of cast<>'s we have. This allows someone to use
things like Ty->getVectorNumElements() instead of
cast<VectorType>(Ty)->getNumElements() when you know that a type is a
vector.
It would be a great general cleanup to move the codebase to use these,
I will do so in the code I'm touching.
llvm-svn: 148999
to 64-bits, and added a new attribute in bit #32. Specifically, remove
this new attribute from the enum used in the C API. It's not yet clear
what the best approach is for exposing these new attributes in the
C API, and several different proposals are on the table. Until then, we
can simply not expose this bit in the API at all.
Also, I've reverted a somewhat unrelated change in the same revision
which switched from "1 << 31" to "1U << 31" for the top enum. While "1
<< 31" is technically undefined behavior, implementations DTRT here.
However, MS and -pedantic mode warn about non-'int' type enumerator
values. If folks feel strongly about this I can put the 'U' back in, but
it seemed best to wait for the proper solution.
llvm-svn: 148937
add a ConstantDataArray::getString method that corresponds to the (to be
removed) StringRef version of ConstantArray::get, but is dramatically more
efficient.
llvm-svn: 148804
and clean up some other misc stuff. Unlike ConstantArray, we will
prefer to emit .fill directives for "String" arrays that all have
the same value, since they are denser than emitting a .ascii
llvm-svn: 148793
same semantics as ConstantArray's but much more efficient because they
don't have to return std::string's. The ConstantArray methods will
eventually be removed.
llvm-svn: 148792
out into a new ConstantFoldLoadThroughGEPIndices (more useful) function
and rewrite it to be simpler, more efficient, and to handle the new
ConstantDataSequential type.
Enhance ConstantFoldLoadFromConstPtr to handle ConstantDataSequential.
llvm-svn: 148786
violation -- MC cannot depend on CodeGen.
Specifically, the MCTargetDesc component of each target is actually
a subcomponent of the MC library. As such, it cannot depend on the
target-independent code generator, because MC itself cannot depend on
the target-independent code generator. This change moved a flag from the
ARM MCTargetDesc file ARMMCAsmInfo.cpp to the CodeGen layer in
ARMException.cpp, leaving behind an 'extern' to refer back to it. That
layering order isn't viable givin the constraints outlined above.
Commandline flags are designed to be static specifically to avoid these
types of bugs.
Fixing this is likely going to require some non-trivial refactoring.
llvm-svn: 148759
classes, per PR1324. Not all of their helper functions are implemented,
nothing creates them, and the rest of the compiler doesn't handle them yet.
llvm-svn: 148741
This change adds an new value to the --arm-enable-ehabi option that
disables emitting unwinding descriptors. This mode gives a working
backtrace() without the (currently broken) exception support.
llvm-svn: 148686
in a subclass named DyldELFObject. This class supports rebasing the object file
it represents by re-mapping section addresses to the actual memory addresses
the object was placed in. This is required for MC-JIT implementation on ELF with
debugging support.
Patch reviewed on llvm-commits.
Developed together with Ashok Thirumurthi and Andrew Kaylor.
llvm-svn: 148653
A register mask operand kills any live physreg that isn't preserved.
Unlike an implicit-def operand, the clobbered physregs are never live
afterwards.
This means LiveVariables has to track a much smaller number of live
physregs, and it should spend much less time in addRegisterDead().
llvm-svn: 148609
Problem: LLVM needs more function attributes than currently available (32 bits).
One such proposed attribute is "address_safety", which shows that a function is being checked for address safety (by AddressSanitizer, SAFECode, etc).
Solution:
- extend the Attributes from 32 bits to 64-bits
- wrap the object into a class so that unsigned is never erroneously used instead
- change "unsigned" to "Attributes" throughout the code, including one place in clang.
- the class has no "operator uint64 ()", but it has "uint64_t Raw() " to support packing/unpacking.
- the class has "safe operator bool()" to support the common idiom: if (Attributes attr = getAttrs()) useAttrs(attr);
- The CTOR from uint64_t is marked explicit, so I had to add a few explicit CTOR calls
- Add the new attribute "address_safety". Doing it in the same commit to check that attributes beyond first 32 bits actually work.
- Some of the functions from the Attribute namespace are worth moving inside the class, but I'd prefer to have it as a separate commit.
Tested:
"make check" on Linux (32-bit and 64-bit) and Mac (10.6)
built/run spec CPU 2006 on Linux with clang -O2.
This change will break clang build in lib/CodeGen/CGCall.cpp.
The following patch will fix it.
llvm-svn: 148553
LSR has gradually been improved to more aggressively reuse existing code, particularly existing phi cycles. This exposed problems with the SCEVExpander's sloppy treatment of its insertion point. I applied some rigor to the insertion point problem that will hopefully avoid an endless bug cycle in this area. Changes:
- Always used properlyDominates to check safe code hoisting.
- The insertion point provided to SCEV is now considered a lower bound. This is usually a block terminator or the use itself. Under no cirumstance may SCEVExpander insert below this point.
- LSR is reponsible for finding a "canonical" insertion point across expansion of different expressions.
- Robust logic to determine whether IV increments are in "expanded" form and/or can be safely hoisted above some insertion point.
Fixes PR11783: SCEVExpander assert.
llvm-svn: 148535
to instruction right after the last instruction in the bundle.
- Add a finalizeBundle() variant that doesn't specify LastMI. Instead, the code
will find the last instruction in the bundle by following the 'InsideBundle'
marker. This is useful in case bundles are formed early (i.e. during MI
scheduling) but finalized later (i.e. after register allocator has finished
rewriting virtual registers with physical registers).
llvm-svn: 148444
This SelectionDAG node will be attached to call nodes by LowerCall(),
and eventually becomes a MO_RegisterMask MachineOperand on the
MachineInstr representing the call instruction.
LowerCall() will attach a register mask that depends on the calling
convention.
llvm-svn: 148436
When set, this bit indicates that a register is completely defined by
the value of its sub-registers.
Use the CoveredBySubRegs property to infer which super-registers are
call-preserved given a list of callee-saved registers. For example, the
ARM registers D8-D15 are callee-saved. This now automatically implies
that Q4-Q7 are call-preserved.
Conversely, Win64 callees save XMM6-XMM15, but the corresponding
YMM6-YMM15 registers are not call-preserved because they are not fully
defined by their sub-registers.
llvm-svn: 148363
Targets can now add CalleeSavedRegs defs to their *CallingConv.td file.
TableGen will use this to create a *_SaveList array suitable for
returning from getCalleeSavedRegs() as well as a *_RegMask bit mask
suitable for returning from getCallPreservedMask().
llvm-svn: 148346
BitVector uses the native word size for its internal representation.
That doesn't work well for literal bit masks in source code.
This patch adds BitVector operations to efficiently apply literal bit
masks specified as arrays of uint32_t. Since each array entry always
holds exactly 32 bits, these portable bit masks can be source code
literals, probably produced by TableGen.
llvm-svn: 148272
Move to a by-section allocation and relocation scheme. This allows
better support for sections which do not contain externally visible
symbols.
Flesh out the relocation address vs. local storage address separation a
bit more as well. Remote process JITs use this to tell the relocation
resolution code where the code will live when it executes.
The startFunctionBody/endFunctionBody interfaces to the JIT and the
memory manager are deprecated. They'll stick around for as long as the
old JIT does, but the MCJIT doesn't use them anymore.
llvm-svn: 148258
Register masks will be used as a compact representation of large clobber
lists. Currently, an x86 call instruction has some 40 operands
representing call-clobbered registers. That's more than 1kB of useless
operands per call site.
A register mask operand references a bit mask of call-preserved
registers, everything else is clobbered. The bit mask will typically
come from TargetRegisterInfo::getCallPreservedMask().
By abandoning ImplicitDefs for call-clobbered registers, it also becomes
possible to share call instruction descriptions between calling
conventions, and we can get rid of the WINCALL* instructions.
This patch introduces the new operand kind. Future patches will add
RegMask support to target-independent passes before finally the fixed
clobber lists can be removed from call instruction descriptions.
llvm-svn: 148250
or Clang is using this, and it would be hard to use it correctly given
the thread hostility of the function. Also, it never checked the return
which is rather dangerous with chdir. If someone was in fact using this,
please let me know, as well as what the usecase actually is so that
I can add it back and make it more correct and secure to use. (That
said, it's never going to be "safe" per-se, but we could at least
document the risks...)
llvm-svn: 148211
The hook returns a bit-mask of call-preserved registers that will
eventually replace the current list of implicit defs on call
instructions. This will make it possible to support multiple calling
conventions without duplicating call instruction descriptors.
The call-preserved mask is slightly different from the list returned by
the getCalleeSavedRegs() hook, it includes all aliases that are
preserved by calls.
The hook takes a CallingConv::ID argument instead of a MachineFunction
pointer, so it can provide information about calls to extern functions,
and even indirect function calls.
TRI::getCalleeSavedRegs() returns information about the function
currently being compiled. TRI::getCallPreservedMask() returns
information about the functions it is calling.
llvm-svn: 148165
Consider this code:
int h() {
int x;
try {
x = f();
g();
} catch (...) {
return x+1;
}
return x;
}
The variable x is undefined on the first edge to the landing pad, but it
has the f() return value on the second edge to the landing pad.
SplitAnalysis::getLastSplitPoint() would assume that the return value
from f() was live into the landing pad when f() throws, which is of
course impossible.
Detect these cases, and treat them as if the landing pad wasn't there.
This allows spill code to be inserted after the function call to f().
<rdar://problem/10664933>
llvm-svn: 147912
Delete the alternative implementation in LiveIntervalAnalysis.
These functions computed the same thing, but SplitAnalysis caches the
result.
llvm-svn: 147911
with other symbols.
An object in the __cfstring section is suppoed to be filled with CFString
objects, which have a pointer to ___CFConstantStringClassReference followed by a
pointer to a __cstring. If we allow the object in the __cstring section to be
merged with another global, then it could end up in any section. Because the
linker is going to remove these symbols in the final executable, we shouldn't
bother to merge them.
<rdar://problem/10564621>
llvm-svn: 147899
functional change in r147860 to use DW_TAG_label's instead TAG_subprogram's.
This only changes names and updates comments. No functional change.
llvm-svn: 147877
of several newly un-defaulted switches. This also helps optimizers
(including LLVM's) recognize that every case is covered, and we should
assume as much.
llvm-svn: 147861
These heuristics are sufficient for enabling IV chains by
default. Performance analysis has been done for i386, x86_64, and
thumbv7. The optimization is rarely important, but can significantly
speed up certain cases by eliminating spill code within the
loop. Unrolled loops are prime candidates for IV chains. In many
cases, the final code could still be improved with more target
specific optimization following LSR. The goal of this feature is for
LSR to make the best choice of induction variables.
Instruction selection may not completely take advantage of this
feature yet. As a result, there could be cases of slight code size
increase.
Code size can be worse on x86 because it doesn't support postincrement
addressing. In fact, when chains are formed, you may see redundant
address plus stride addition in the addressing mode. GenerateIVChains
tries to compensate for the common cases.
On ARM, code size increase can be mitigated by using postincrement
addressing, but downstream codegen currently misses some opportunities.
llvm-svn: 147826
file error checking. Use that to error on an unfinished cfi_startproc.
The error is not nice, but is already better than a segmentation fault.
llvm-svn: 147717
opportunities that only present themselves after late optimizations
such as tail duplication .e.g.
## BB#1:
movl %eax, %ecx
movl %ecx, %eax
ret
The register allocator also leaves some of them around (due to false
dep between copies from phi-elimination, etc.)
This required some changes in codegen passes. Post-ra scheduler and the
pseudo-instruction expansion passes have been moved after branch folding
and tail merging. They were before branch folding before because it did
not always update block livein's. That's fixed now. The pass change makes
independently since we want to properly schedule instructions after
branch folding / tail duplication.
rdar://10428165
rdar://10640363
llvm-svn: 147716
The register allocators don't currently support adding reserved
registers while they are running. Extend the MRI API to keep track of
the set of reserved registers when register allocation started.
Target hooks like hasFP() and needsStackRealignment() can look at this
set to avoid reserving more registers during register allocation.
llvm-svn: 147577
Using DenseMap iterators isn't free as they have to check for empty
buckets. Dominator queries are common so this gives a minor speedup.
llvm-svn: 147544
Get back getHostTriple.
For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.
llvm-svn: 147542
captured. This allows the tracker to look at the specific use, which may be
especially interesting for function calls.
Use this to fix 'nocapture' deduction in FunctionAttrs. The existing one does
not iterate until a fixpoint and does not guarantee that it produces the same
result regardless of iteration order. The new implementation builds up a graph
of how arguments are passed from function to function, and uses a bottom-up walk
on the argument-SCCs to assign nocapture. This gets us nocapture more often, and
does so rather efficiently and independent of iteration order.
llvm-svn: 147327
Diagnostics are now emitted via the SourceMgr and we use MemoryBuffer
for buffer management. Switched the code to make use of the trailing
'0' that MemoryBuffer guarantees where it makes sense.
llvm-svn: 147063
unpredicated. That is, turn
subeq r0, r1, #1
addne r0, r1, #1
into
sub r0, r1, #1
addne r0, r1, #1
For targets where conditional instructions are always executed, this may be
beneficial. It may remove pseudo anti-dependency in out-of-order execution
CPUs. e.g.
op r1, ...
str r1, [r10] ; end-of-life of r1 as div result
cmp r0, #65
movne r1, #44 ; raw dependency on previous r1
moveq r1, #12
If movne is unpredicated, then
op r1, ...
str r1, [r10]
cmp r0, #65
mov r1, #44 ; r1 written unconditionally
moveq r1, #12
Both mov and moveq are no longer depdendent on the first instruction. This gives
the out-of-order execution engine more freedom to reorder them.
This has passed entire LLVM test suite. But it has not been enabled for any ARM
variant pending more performance evaluation.
rdar://8951196
llvm-svn: 146914
Use information computed while inferring new register classes to emit
accurate, table-driven implementations of getMatchingSuperRegClass().
Delete the old manual, error-prone implementations in the targets.
llvm-svn: 146873
make VariadicFunction actually be trivial. Do so, and also make it look
more like your standard trivial functor by making it a struct with no
access specifiers. The unit test is updated to initialize its functors
properly.
llvm-svn: 146827
variadic-like functions in C++98. See the comments in the header file
for a more detailed description of how these work. We plan to use these
extensively in the AST matching library. This code and idea were
originally authored by Zhanyong Wan. I've condensed it using macros
to reduce repeatition and adjusted it to fit better with LLVM's ADT.
Thanks to both David Blaikie and Doug Gregor for the review!
llvm-svn: 146729
into Analysis as a standalone function, since there's no need for
it to be in VMCore. Also, update it to use isKnownNonZero and
other goodies available in Analysis, making it more precise,
enabling more aggressive optimization.
llvm-svn: 146610
r0 = mov #0
r0 = moveq #1
Then the second instruction has an implicit data dependency on the first
instruction. Sadly I have yet to come up with a small test case that
demonstrate the post-ra scheduler taking advantage of this.
llvm-svn: 146583
to finalize MI bundles (i.e. add BUNDLE instruction and computing register def
and use lists of the BUNDLE instruction) and a pass to unpack bundles.
- Teach more of MachineBasic and MachineInstr methods to be bundle aware.
- Switch Thumb2 IT block to MI bundles and delete the hazard recognizer hack to
prevent IT blocks from being broken apart.
llvm-svn: 146542
undefined result. This adds new ISD nodes for the new semantics,
selecting them when the LLVM intrinsic indicates that the undef behavior
is desired. The new nodes expand trivially to the old nodes, so targets
don't actually need to do anything to support these new nodes besides
indicating that they should be expanded. I've done this for all the
operand types that I could figure out for all the targets. Owners of
various targets, please review and let me know if any of these are
incorrect.
Note that the expand behavior is *conservatively correct*, and exactly
matches LLVM's current behavior with these operations. Ideally this
patch will not change behavior in any way. For example the regtest suite
finds the exact same instruction sequences coming out of the code
generator. That's why there are no new tests here -- all of this is
being exercised by the existing test suite.
Thanks to Duncan Sands for reviewing the various bits of this patch and
helping me get the wrinkles ironed out with expanding for each target.
Also thanks to Chris for clarifying through all the discussions that
this is indeed the approach he was looking for. That said, there are
likely still rough spots. Further review much appreciated.
llvm-svn: 146466
indicates whether the intrinsic has a defined result for a first
argument equal to zero. This will eventually allow these intrinsics to
accurately model the semantics of GCC's __builtin_ctz and __builtin_clz
and the X86 instructions (prior to AVX) which implement them.
This patch merely sets the stage by extending the signature of these
intrinsics and establishing auto-upgrade logic so that the old spelling
still works both in IR and in bitcode. The upgrade logic preserves the
existing (inefficient) semantics. This patch should not change any
behavior. CodeGen isn't updated because it can use the existing
semantics regardless of the flag's value.
Note that this will be followed by API updates to Clang and DragonEgg.
Reviewed by Nick Lewycky!
llvm-svn: 146357
The OptLevel is now redundant with the TargetMachine*.
And selectTarget() isn't really JIT-specific and could probably
get refactored into one of the lower level libraries.
llvm-svn: 146355
generates the dwarf Compile Unit DIE and a dwarf subprogram DIE for each
non-temporary label.
The next part will be to get the clang driver to enable this when assembling
a .s file. rdar://9275556
llvm-svn: 146262
Patch by Brendon Cahoon!
This extends the existing LoopUnroll and LoopUnrollPass. Brendon
measured no regressions in the llvm test suite with -unroll-runtime
enabled. This implementation works by using the existing loop
unrolling code to unroll the loop by a power-of-two (default 8). It
generates an if-then-else sequence of code prior to the loop to
execute the extra iterations before entering the unrolled loop.
llvm-svn: 146245
clients to decide whether to look inside bundled instructions and whether
the query should return true if any / all bundled instructions have the
queried property.
llvm-svn: 146168
files. First, add a new block USELIST_BLOCK to the bitcode format. This is
where USELIST_CODE_ENTRYs will be stored. The format of the USELIST_CODE_ENTRYs
have not yet been defined. Add support in the BitcodeReader for parsing the
USELIST_BLOCK.
Part of rdar://9860654 and PR5680.
llvm-svn: 146078
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
llvm-svn: 146026
This flag is used when bundling machine instructions. It indicates
whether the operand reads a value defined inside or outside its bundle.
llvm-svn: 145997
For example, ARM allows:
vmov.u32 s4, #0 -> vmov.i32, #0
'u32' is a more specific designator for the 32-bit integer type specifier
and is legal for any instruction which accepts 'i32' as a datatype suffix.
We want to say,
def : TokenAlias<".u32", ".i32">;
This works by marking the match class of 'From' as a subclass of the
match class of 'To'.
rdar://10435076
llvm-svn: 145992
1. Added opcode BUNDLE
2. Taught MachineInstr class to deal with bundled MIs
3. Changed MachineBasicBlock iterator to skip over bundled MIs; added an iterator to walk all the MIs
4. Taught MachineBasicBlock methods about bundled MIs
llvm-svn: 145975
This was actually a bit of a mess. TLI.setPrefLoopAlignment was clearly
documented as taking log2(bytes) units, but the x86 target would still
set a preferred loop alignment of '16'.
CodePlacementOpt passed this number on to the basic block, and
AsmPrinter interpreted it as bytes.
Now both MachineFunction and MachineBasicBlock use logarithmic
alignments.
Obviously, MachineConstantPool still measures alignments in bytes, so we
can emulate the thrill of using as.
llvm-svn: 145889
Whether a fixup needs relaxation for the associated instruction is a
target-specific function, as the FIXME indicated. Create a hook for that
and use it.
llvm-svn: 145881
This is a patch by Guoping Long!
As part of utilizing LLVM Dominator computation in Clang, made two changes to LLVM dominators tree implementation:
- (1) Change the recalculate() template function to only rely on GraphTraits.
- (2) Add a size() method to GraphTraits template class to query the number of nodes in the graph.
llvm-svn: 145837
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
llvm-svn: 145714
It was getting ignored after r144788.
Also fix an accidental implicit cast from the OptLevel enum
to an optional bool argument. MSVC warned on this, but gcc
didn't.
llvm-svn: 145633
as MC is the only assembler we support.
This splits MS/Windows and GNU/Windows ASM infos into two seperate classes.
While there is currently only one difference, full MS C++ ABI support will
require many more.
llvm-svn: 145409
Now that it needs to be exported in a public header (Valgrind.h)
it should be prefixed to avoid collision with other projects.
Add it to llvm-config.h as well.
This'll require regenerating the configure script after this
commit, but I don't have the required autoconf version.
llvm-svn: 145214
It was out of sync with the description in configure.ac/config.h.in.
Also re-alphabetize it from its position when it was LLVM_HOST_TRIPLE.
llvm-svn: 145213
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
llvm-svn: 144788
Two new TargetInstrInfo hooks lets the target tell ExecutionDepsFix
about instructions with partial register updates causing false unwanted
dependencies.
The ExecutionDepsFix pass will break the false dependencies if the
updated register was written in the previoius N instructions.
The small loop added to sse-domains.ll runs twice as fast with
dependency-breaking instructions inserted.
llvm-svn: 144602
and stores capture) to permit the caller to see each capture point and decide
whether to continue looking.
Use this inside memdep to do an analysis that basicaa won't do. This lets us
solve another devirtualization case, fixing PR8908!
llvm-svn: 144580
These annotations are disabled entirely when either ENABLE_THREADS is off, or
building a release build. When enabled, they add calls to functions with no
statements to ManagedStatic's getters.
Use these annotations to inform tsan that the race used inside ManagedStatic
initialization is actually benign. Thanks to Kostya Serebryany for helping
write this patch!
llvm-svn: 144567
time it is queried to compute the probability of a single successor.
This makes computing the probability of every successor of a block in
sequence... really really slow. ;] This switches to a linear walk of the
successors rather than a quadratic one. One of several quadratic
behaviors slowing this pass down.
I'm not really thrilled with moving the sum code into the public
interface of MBPI, but I don't (at the moment) have ideas for a better
interface. My direction I'm thinking in for a better interface is to
have MBPI actually retain much more state and make *all* of these
queries cheap. That's a lot of work, and would require invasive changes.
Until then, this seems like the least bad (ie, least quadratic)
solution. Suggestions welcome.
llvm-svn: 144530
correctly handle blocks whose successor weights sum to more than
UINT32_MAX. This is slightly less efficient, but the entire thing is
already linear on the number of successors. Calling it within any hot
routine is a mistake, and indeed no one is calling it. It also
simplifies the code.
llvm-svn: 144527
the sum of the edge weights not overflowing uint32, and crashed when
they did. This is generally safe as BranchProbabilityInfo tries to
provide this guarantee. However, the CFG can get modified during codegen
in a way that grows the *sum* of the edge weights. This doesn't seem
unreasonable (imagine just adding more blocks all with the default
weight of 16), but it is hard to come up with a case that actually
triggers 32-bit overflow. Fortuately, the single-source GCC build is
good at this. The solution isn't very pretty, but its no worse than the
previous code. We're already summing all of the edge weights on each
query, we can sum them, check for an overflow, compute a scale, and sum
them again.
I've included a *greatly* reduced test case out of the GCC source that
triggers it. It's a pretty lame test, as it clearly is just barely
triggering the overflow. I'd like to have something that is much more
definitive, but I don't understand the fundamental pattern that triggers
an explosion in the edge weight sums.
The buggy code is duplicated within this file. I'll colapse them into
a single implementation in a subsequent commit.
llvm-svn: 144526
The old naming scheme (load/use/def/store) can be traced back to an old
linear scan article, but the names don't match how slots are actually
used.
The load and store slots are not needed after the deferred spill code
insertion framework was deleted.
The use and def slots don't make any sense because we are using
half-open intervals as is customary in C code, but the names suggest
closed intervals. In reality, these slots were used to distinguish
early-clobber defs from normal defs.
The new naming scheme also has 4 slots, but the names match how the
slots are really used. This is a purely mechanical renaming, but some
of the code makes a lot more sense now.
llvm-svn: 144503
RegAllocGreedy has been the default for six months now.
Deleting RegAllocLinearScan makes it possible to also delete
VirtRegRewriter and clean up the spiller code.
llvm-svn: 144475
When this field is true it means that the load is from constant (runt-time or compile-time) and so can be hoisted from loops or moved around other memory accesses
llvm-svn: 144100
the mailing list. Suggestions for other statistics to collect would be
awesome. =]
Currently these are implemented as a separate pass guarded by a separate
flag. I'm not thrilled by that, but I wanted to be able to collect the
statistics for the old code placement as well as the new in order to
have a point of comparison. I'm planning on folding them into the single
pass if / when there is only one pass of interest.
llvm-svn: 143537
-g flag. In this part we generate the .file for the source being assembled and
the .loc's for the assembled instructions.
The next part will be to generate the dwarf Compile Unit DIE and a dwarf
subprogram DIE for each non-temporary label.
Once the next part is done test cases will be added. rdar://9275556
llvm-svn: 143509
introduce no-return or unreachable heuristics.
The return heuristics from the Ball and Larus paper don't work well in
practice as they pessimize early return paths. The only good hitrate
return heuristics are those for:
- NULL return
- Constant return
- negative integer return
Only the last of these three can possibly require significant code for
the returning block, and even the last is fairly rare and usually also
a constant. As a consequence, even for the cold return paths, there is
little code on that return path, and so little code density to be gained
by sinking it. The places where sinking these blocks is valuable (inner
loops) will already be weighted appropriately as the edge is a loop-exit
branch.
All of this aside, early returns are nearly as common as all three of
these return categories, and should actually be predicted as taken!
Rather than muddy the waters of the static predictions, just remain
silent on returns and let the CFG itself dictate any layout or other
issues.
However, the return heuristic was flagging one very important case:
unreachable. Unfortunately it still gave a 1/4 chance of the
branch-to-unreachable occuring. It also didn't do a rigorous job of
finding those blocks which post-dominate an unreachable block.
This patch builds a more powerful analysis that should flag all branches
to blocks known to then reach unreachable. It also has better worst-case
runtime complexity by not looping through successors for each block. The
previous code would perform an N^2 walk in the event of a single entry
block branching to N successors with a switch where each successor falls
through to the next and they finally fall through to a return.
Test case added for noreturn heuristics. Also doxygen comments improved
along the way.
llvm-svn: 142793
two more subtle routines to the bottom and expand on their cautionary
comments a bit. No functionality or actual interface change here.
llvm-svn: 142789
a single class. Previously it was split between two classes, one
internal and one external. The concern seemed to center around exposing
the weights used, but those can remain confined to the implementation
file.
Having a single class to maintain the state and analyses in use will
also simplify several of the enhancements I want to make to our static
heuristics.
llvm-svn: 142783
to bring it under direct test instead of merely indirectly testing it in
the BlockFrequencyInfo pass.
The next step is to start adding tests for the various heuristics
employed, and to start fixing those heuristics once they're under test.
llvm-svn: 142778
block frequency analyses. This differs substantially from the existing
block-placement pass in LLVM:
1) It operates on the Machine-IR in the CodeGen layer. This exposes much
more (and more precise) information and opportunities. Also, the
results are more stable due to fewer transforms ocurring after the
pass runs.
2) It uses the generalized probability and frequency analyses. These can
model static heuristics, code annotation derived heuristics as well
as eventual profile loading. By basing the optimization on the
analysis interface it can work from any (or a combination) of these
inputs.
3) It uses a more aggressive algorithm, both building chains from tho
bottom up to maximize benefit, and using an SCC-based walk to layout
chains of blocks in a profitable ordering without O(N^2) iterations
which the old pass involves.
The pass is currently gated behind a flag, and not enabled by default
because it still needs to grow some important features. Most notably, it
needs to support loop aligning and careful layout of loop structures
much as done by hand currently in CodePlacementOpt. Once it supports
these, and has sufficient testing and quality tuning, it should replace
both of these passes.
Thanks to Nick Lewycky and Richard Smith for help authoring & debugging
this, and to Jakob, Andy, Eric, Jim, and probably a few others I'm
forgetting for reviewing and answering all my questions. Writing
a backend pass is *sooo* much better now than it used to be. =D
llvm-svn: 142641
AsmParser. This patch adds validation for target data layout strings upon
construction of TargetData objects. An attempt to construct a TargetData object
from a malformed string will trigger an assertion.
llvm-svn: 142605
Add a Value named "NAME" to each Record. This will be set to the def or defm
name when instantiating multiclasses. This will replace the #NAME# processing
hack once paste functionality is in place.
llvm-svn: 142518
Record names may not be fully resolved at this point so ask for the
record name as a string explicitly. This avoids a potential assert.
llvm-svn: 142502
Allow template arg names to be Inits. This is further work to
implement paste as it allows template names to participate in paste
operations.
llvm-svn: 142500
Add a couple of utility functions to take a variable name and qualify
it with the namespace of the enclosing class and/or multiclass. This
is inpreparation for making template arg names first-class Inits.
llvm-svn: 142498
Make the VarInit name an Init itself. We need this to implement paste
functionality so we can reference variables whose names are not yet
completely resolved.
llvm-svn: 142497
Add accessors to get Record values by Init name. This lets us look up
Record values whose names are not yet fully resolved. More work
toward paste.
llvm-svn: 142496
Add a couple of utility functions to get at the name init and return
the name init as a string. This will be used for paste functionality.
llvm-svn: 142494
layer already had support for printing the results of this analysis, but
the wiring was missing.
Now that printing the analysis works, actually bring some of this
analysis, and the BranchProbabilityInfo analysis that it wraps, under
test! I'm planning on fixing some bugs and doing other work here, so
having a nice place to add regression tests and a way to observe the
results is really useful.
llvm-svn: 142491
Clean up the patterns, fix comments, and avoid confusing both tools
and coders. Note that the special adds/subs SelectionDAG nodes no
longer have the dummy cc_out operand.
llvm-svn: 142397
Some of these can be true at the same time and there are a lot to add,
so this should be turned into a bitfield. Some of the other accessors
should probably be folded into this.
llvm-svn: 142318
.file filenumber "directory" "filename"
This removes one join+split of the directory+filename in MC internals. Because
bitcode files have independent fields for directory and filenames in debug info,
this patch may change the .o files written by existing .bc files.
llvm-svn: 142300
Invalid strings in asm files will result in parse errors. Invalid string literals passed to TargetData constructors will result in an assertion.
llvm-svn: 142288
Some code want to check that *any* call within a function has the 'returns
twice' attribute, not just that the current function has one.
llvm-svn: 142221
In machine code, you can't just replaceRegWith() the same way you can
replaceAllUsesWith() in IR. Virtual registers may have different
register classes that need to be merged first.
llvm-svn: 142201
profile metadata at the same time. Use it to preserve metadata attached
to a branch when re-writing it in InstCombine.
Add metadata to the canonicalize_branch InstCombine test, and check that
it is tranformed correctly.
Reviewed by Nick Lewycky!
llvm-svn: 142168
the X86 asmparser to produce ranges in the one case that was annoying me, for example:
test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
^~~~~~~
It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use
ranges where appropriate if someone is interested.
llvm-svn: 142106
Just because we're dealing with a GEP doesn't mean we can assert the
SCEV has a pointer type. The fix is simply to ignore the SCEV pointer
type, which we really didn't need.
Fixes PR11138 webkit crash.
llvm-svn: 142058
Most instructions have some requirements for their register operands.
Usually, this is expressed as register class constraints in the
MCInstrDesc, but for inline assembly the constraints are encoded in the
flag words.
llvm-svn: 141835
The inline asm operand constraint is initially encoded in the virtual
register for the operand, but that register class may change during
coalescing, and the original constraint is lost.
Encode the original register class as part of the flag word for each
inline asm operand. This makes it possible to recover the actual
constraint required by inline asm, just like we can for normal
instructions.
llvm-svn: 141833
for cpp pre-processed assembly we give correct filename and line numbers when
reporting errors in assembly files when using clang and -integrated-as on .s
files. rdar://8998895
llvm-svn: 141814
file. Since it should only be used when necessary propagate it through
the backend code generation and tweak testcases accordingly.
This helps with code like in clang's test/CodeGen/debug-info-line.c where
we have multiple #line directives within a single lexical block and want
to generate only a single block that contains each file change.
Part of rdar://10246360
llvm-svn: 141729
unused) code from .cmake to DataTypes.h.in so that the files are essentially in
sync module differences in autoconf/cmake replacement syntax.
llvm-svn: 141702
IVs.
Indvars previously chose randomly between congruent IVs. Now it will
bias the decision toward IVs that SCEVExpander likes to create. This
was not done to fix any problem, it's just a welcome side effect of
factoring code.
llvm-svn: 141633
This line, and those below, will be ignored--
M include/llvm/Linker.h
M tools/bugpoint/Miscompilation.cpp
M tools/bugpoint/BugDriver.cpp
M tools/llvm-link/llvm-link.cpp
M lib/Linker/LinkModules.cpp
llvm-svn: 141606
promoting allocas to preferred alignments that exceed the natural
alignment. This avoids some potentially expensive dynamic stack realignments.
The natural stack alignment is set in target data strings via the "S<size>"
option. Size is in bits and must be a multiple of 8. The natural stack alignment
defaults to "unspecified" (represented by a zero value), and the "unspecified"
value does not prevent any alignment promotions. Target maintainers that care
about avoiding promotions should explicitly add the "S<size>" option to their
target data strings.
llvm-svn: 141599
flags as binutils objdump but the output is different, not just in format but
also showing different sections. Compare its results against readelf, not
objdump.
llvm-svn: 141579
The difference between isPseudo and isCodeGenOnly is a bit murky, but
isCodeGenOnly should eventually go away. It is used for instructions
that are clones of real instructions with slightly different properties.
The standard pseudo-instructions never mirror real instructions, so they
are definitely in the isPseudo category.
llvm-svn: 141567
--- Reverse-merging r141377 into '.':
U tools/llvm-objdump/MachODump.cpp
--- Reverse-merging r141376 into '.':
U include/llvm/Object/COFF.h
U include/llvm/Object/ObjectFile.h
U include/llvm-c/Object.h
U tools/llvm-objdump/llvm-objdump.cpp
U lib/Object/MachOObjectFile.cpp
U lib/Object/COFFObjectFile.cpp
U lib/Object/Object.cpp
U lib/Object/ELFObjectFile.cpp
llvm-svn: 141379
Multidefs are a bit unwieldy and incomplete. Remove them in favor of
another mechanism, probably for loops.
Revert "Make Test More Thorough"
Revert "Fix a typo."
Revert "Vim Support for Multidefs"
Revert "Emacs Support for Multidefs"
Revert "Document Multidefs"
Revert "Add a Multidef Test"
Revert "Update Test for Multidefs"
Revert "Process Multidefs"
Revert "Parser Multidef Support"
Revert "Lexer Support for Multidefs"
Revert "Add Multidef Data Structures"
llvm-svn: 141378
They are not in sync now, for example Bitcast would show up as LLVMCall.
So instead introduce 2 functions that map to and from the opcodes in the C
bindings.
llvm-svn: 141290
This restores my karma after I added TRI::getSubClassWithSubReg().
Register constraints are applied 'backwards'. Starting from the
register class required by an instruction operand, the correct question
is: 'How can I constrain the super-register register class so all its
sub-registers satisfy the instruction constraint?' The
getMatchingSuperRegClass() hook answers that.
We never need to go 'forwards': Starting from a super-register register
class, what register class are the sub-registers in? The
getSubRegisterRegClass() hook did that.
llvm-svn: 141258
Add a set of data structures and members analogous to those used for
multiclass defs. These will represent a new kind of multiclass def: a
multidef. The idea behind the multidef is to process a list of items
and create a def record for each one inside the enclosing multiclass.
This allows the user to dynamically create a set of defs based on the
contents of a list.
llvm-svn: 141230
This function is used to constrain a register class to a sub-class that
supports the given sub-register index.
For example, getSubClassWithSubReg(GR32, sub_8bit) -> GR32_ABCD.
The function will be used to compute register classes when emitting
INSERT_SUBREG and EXTRACT_SUBREG nodes and for register class inflation
of sub-register operations.
The version provided by TableGen is usually adequate, but targets can
override.
llvm-svn: 141142
using llvm's public 'C' disassembler API now including annotations.
Hooked this up to Darwin's otool(1) so it can again print things like branch
targets for example this:
blx _puts
instead of this:
blx #-36
and includes support for annotations for branches to symbol stubs like:
bl 0x40 @ symbol stub for: _puts
and annotations for pc relative loads like this:
ldr r3, #8 @ literal pool for: Hello, world!
Also again can print the expression encoded in the Mach-O relocation entries for
things like this:
movt r0, :upper16:((_foo-_bar)+1234)
llvm-svn: 141129
The <undef> flag says that a MachineOperand doesn't read its register,
or doesn't depend on the previous value of its register.
A full register def never depends on the previous register value. A
partial register def may depend on the previous value if it is intended
to update part of a register.
For example:
%vreg10:dsub_0<def,undef> = COPY %vreg1
%vreg10:dsub_1<def> = COPY %vreg2
The first copy instruction defines the full %vreg10 register with the
bits not covered by dsub_0 defined as <undef>. It is not considered a
read of %vreg10.
The second copy modifies part of %vreg10 while preserving the rest. It
has an implicit read of %vreg10.
This patch adds a MachineOperand::readsReg() method to determine if an
operand reads its register.
Previously, this was modelled by adding a full-register <imp-def>
operand to the instruction. This approach makes it possible to
determine directly from a MachineOperand if it reads its register. No
scanning of MI operands is required.
llvm-svn: 141124
This handles the case in which LSR rewrites an IV user that is a phi and
splits critical edges originating from a switch.
Fixes <rdar://problem/6453893> LSR is not splitting edges "nicely"
llvm-svn: 141059
We want heuristics to be based on accurate data, but more importantly
we don't want llvm to behave randomly. A benign trunc inserted by an
upstream pass should not cause a wild swings in optimization
level. See PR11034. It's a general problem with threshold-based
heuristics, but we can make it less bad.
llvm-svn: 140919
This uses less memory and it reduces the complexity of sub-class
operations:
- hasSubClassEq() and friends become O(1) instead of O(N).
- getCommonSubClass() becomes O(N) instead of O(N^2).
In the future, TableGen will infer register classes. This makes it
cheap to add them.
llvm-svn: 140898
This intrinsic is used to pass the index of the function context to the back-end
for further processing. The back-end is in charge of filling in the rest of the
entries.
llvm-svn: 140676
This also enables domain swizzling for AVX code which required a few
trivial test changes.
The pass will be moved to lib/CodeGen shortly.
llvm-svn: 140659
I am going to unify the SSEDomainFix and NEONMoveFix passes into a
single target independent pass. They are essentially doing the same
thing.
llvm-svn: 140652
Many targets use pseudo instructions to help register allocation. Like
the COPY instruction, these pseudos can be expanded after register
allocation. The early expansion can make life easier for PEI and the
post-ra scheduler.
This patch adds a hook that is called for all remaining pseudo
instructions from the ExpandPostRAPseudos pass.
llvm-svn: 140472
The function will refuse to use a register class with fewer registers
than MinNumRegs. This can be used by clients to avoid accidentally
increase register pressure too much.
The default value of MinNumRegs=0 doesn't affect how constrainRegClass()
works.
llvm-svn: 140339
This is still a hack until we can teach tblgen to generate the
optional CPSR operand rather than an implicit CPSR def. But the
strangeness is now limited to the selection DAG. ADD/SUB MI's no
longer have implicit CPSR defs, nor do we allow flag setting variants
of these opcodes in machine code. There are several corner cases to
consider, and getting one wrong would previously lead to nasty
miscompilation. It's not the first time I've debugged one, so this
time I added enough verification to ensure it won't happen again.
llvm-svn: 140228
No functionality change. The hook makes it explicit which patterns
require "special" handling. i.e. it self-documents tblgen
deficiencies. I plan to add verification in ExpandISelPseudos and
Thumb2SizeReduce to catch any missing hasPostISelHooks. Otherwise it's
too fragile.
llvm-svn: 140160
Modified ARMISelLowering::AdjustInstrPostInstrSelection to handle the
full gamut of CPSR defs/uses including instructins whose "optional"
cc_out operand is not really optional. This allowed removal of the
hasPostISelHook to simplify the .td files and make the implementation
more robust.
Fixes rdar://10137436: sqlite3 miscompile
llvm-svn: 140134
gold plugin is built with Large File Support (sizeof(off_t) == 64 on i686)
and the rest of LLVM is built w/o Large File Support
(sizeof(off_t) == 32 on i686) which corrupts the stack.
llvm-svn: 139873
The getPrevIndex() function moves to the same slot in the previous
instruction. For getVNInfoBefore(), we just need the previous slot in
the same instruction.
llvm-svn: 139793
DW_AT_GNU_template_name = 0x2110, not 0x2108. That would explain those
attr #0x2110 under the DW_TAG_GNU_template_template_param I'm seeing. Migrate
from documented values to reality.
llvm-svn: 139785
There is only one legitimate use remaining, in addIntervalsForSpills().
All other calls to hasPHIKill() are only used to update PHIKill flags.
The addIntervalsForSpills() function is part of the old spilling
framework, only used by linearscan.
llvm-svn: 139783
It is conservatively correct to keep the hasPHIKill flags, even after
deleting PHI-defs.
The calculation can be very expensive after taildup has created a
quadratic number of indirectbr edges in the CFG, and the hasPHIKill flag
isn't used for anything after RenumberValues().
llvm-svn: 139780
- Add enum SymbolType and function getSymbolType()
- Add function isGlobal() - it's returns true for symbols that can be used in another objects, such as library functions.
- Rename function getAddress() to getOffset() and add new function getAddress(), because currently getAddress() returns section offset of symbol first byte. new getAddress() return symbol address.
- Change usage SymbolRef::getAddress() to getOffset() in tools/llvm-nm and tools/llvm-objdump.
Patch by Danil Malyshev!
llvm-svn: 139683
#line directives with the needed support in the lexer. Next will be to build
a simple file/line# table mapping source SMLoc's for later use by diagnostics.
And the last step will be to get the diagnostics to use the mapping for file
and line numbers.
llvm-svn: 139669
This introduces a new library to LLVM: libDebugInfo. It will provide debug information
parsing to LLVM. Much of the design and some of the code is taken from the LLDB project.
It also contains an llvm-dwarfdump tool that can dump the abbrevs and DIEs from an
object file. It can be used to write tests for DWARF input and output easily.
llvm-svn: 139627
It is an endian-aware helper that can read data from a StringRef. It will
come in handy for DWARF parsing. This class is inspired by LLDB's
DataExtractor, but is stripped down to the bare minimum needed for DWARF.
Comes with unit tests!
llvm-svn: 139626
any given function. As pointed out by John McCall, this is needed to
have redundant eh.typeid.for tests be eliminated in the presence of
cleanups.
llvm-svn: 139360
duplicate tests are eliminated (for example if the two functions both have
a catch clause catching the same type, ensure the redundant one is removed).
Note that it would probably be safe to say that eh.typeid.for is 'const',
but since two calls to it with the same argument can give different results
(but only if the calls are in different functions), it seems more correct to
mark it only 'pure'; this doesn't get in the way of the optimization.
llvm-svn: 139236
(The fix for the related failures on x86 is going to be nastier because we actually need Acquire memoperands attached to the atomic load instrs, etc.)
llvm-svn: 139221
with a vector condition); such selects become VSELECT codegen nodes.
This patch also removes VSETCC codegen nodes, unifying them with SETCC
nodes (codegen was actually often using SETCC for vector SETCC already).
This ensures that various DAG combiner optimizations kick in for vector
comparisons. Passes dragonegg bootstrap with no testsuite regressions
(nightly testsuite as well as "make check-all"). Patch mostly by
Nadav Rotem.
llvm-svn: 139159
init.trampoline and adjust.trampoline intrinsics, into two intrinsics
like in GCC. While having one combined intrinsic is tempting, it is
not natural because typically the trampoline initialization needs to
be done in one function, and the result of adjust trampoline is needed
in a different (nested) function. To get around this llvm-gcc hacks the
nested function lowering code to insert an additional parent variable
holding the adjust.trampoline result that can be accessed from the child
function. Dragonegg doesn't have the luxury of tweaking GCC code, so it
stored the result of adjust.trampoline in the memory GCC set aside for
the trampoline itself (this is always available in the child function),
and set up some new memory (using an alloca) to hold the trampoline.
Unfortunately this breaks Go which allocates trampoline memory on the
heap and wants to use it even after the parent has exited (!). Rather
than doing even more hacks to get Go working, it seemed best to just use
two intrinsics like in GCC. Patch mostly by Sanjoy Das.
llvm-svn: 139140
- On COFF the .lcomm directive has an alignment argument.
- On ELF we fall back to .local + .comm
Based on a patch by NAKAMURA Takumi.
Fixes PR9337, PR9483 and PR10128.
llvm-svn: 138976
X86. Modify the pass added in the previous patch to call this new
code.
This new prologues generated will call a libgcc routine (__morestack)
to allocate more stack space from the heap when required
Patch by Sanjoy Das.
llvm-svn: 138812
Add a instruction flag: hasPostISelHook which tells the pre-RA scheduler to
call a target hook to adjust the instruction. For ARM, this is used to
adjust instructions which may be setting the 's' flag. ADC, SBC, RSB, and RSC
instructions have implicit def of CPSR (required since it now uses CPSR physical
register dependency rather than "glue"). If the carry flag is used, then the
target hook will *fill in* the optional operand with CPSR. Otherwise, the hook
will remove the CPSR implicit def from the MachineInstr.
llvm-svn: 138810
This upgrade suffers from the problems of the old EH scheme - i.e., that the
calls to llvm.eh.exception() and llvm.eh.selector() can wander off and get
lost. It makes a valiant effort to reclaim these little lost lambs.
This is a first draft, so it hasn't yet been hooked up to the parser.
llvm-svn: 138602
functionality into DEFINE_TRANSPARENT_OPERAND_ACCESSORS. A side-effect
of this is that the operand accessors for Constants will tolerate NULL
operands, fixing PR10663.
llvm-svn: 138230
SplitLandingPadPredecessors is similar to SplitBlockPredecessors in that it
splits the current block and attaches a set of predecessors to the new basic
block. However, it differs from SplitBlockPredecessors in that it's specifically
designed to handle landing pad blocks.
Two new basic blocks are created: one that is has the vector of predecessors as
its predecessors and one that has the remaining predecessors as its
predecessors. Those two new blocks then receive a cloned copy of the landingpad
instruction from the original block. The landingpad instructions are joined in a
PHI, etc. Like SplitBlockPredecessors, it updates the LLVM IR, AliasAnalysis,
DominatorTree, DominanceFrontier, LoopInfo, and LCCSA analyses.
llvm-svn: 138014
This patch adds support of NativeClient (*-*-nacl) OS support to LLVM.
It's already supported in autoconf/config.sub.
The motivation for this change is to start upstreaming PNaCl work. The
whole set of patches include llvm backends (i686, x86_64, ARM),
llvm-gcc (probably, would not be upstreamed because it's deprecated)
and clang (the work has been just started, the amount of changes is
going to be low and the most of the work is expected to be done close
to the mainline).
llvm-svn: 138005
The landingpad instruction is lowered into the EXCEPTIONADDR and EHSELECTION
SDNodes. The information from the landingpad instruction is harvested by the
'AddLandingPadInfo' function. The new EH uses the current EH scheme in the
back-end. This will change once we switch over to the new scheme. (Reviewed by
Jakob!)
llvm-svn: 137880
MDNodes graph structure such that compiler unit keeps track of important MDNodes and update dwarf writer to process mdnodes top-down instead of bottom up.
llvm-svn: 137778
getFirstInsertionPt() returns an iterator to the first insertion point in a
basic block. This is after all PHIs and any other instruction which is required
to be at the top of the basic block (like LandingPadInst).
llvm-svn: 137744
Chandler Carruth