Clean up register list handling in general a bit to explicitly check things
like all the registers being from the same register class.
rdar://8883573
llvm-svn: 139707
The immediate offset of the non-writeback i8 form (encoding T4) allows
negative offsets only. The positive offset form of the encoding is the
LDRT instruction. Immediate offsets in the range [0,255] use encoding T3
instead.
llvm-svn: 139254
There is no 16-bit wide encoding, so the .w suffix isn't needed (indeed, isn't
documented as allowed). Also add the missing '!' token on the _UPD
variant.
llvm-svn: 139243
Choose 32-bit vs. 16-bit encoding when there's no .w suffix in post-processing
as match classes are insufficient to handle the context-sensitiveness of
the writeback operand's legality for the 16-bit encodings.
llvm-svn: 139242
with a vector condition); such selects become VSELECT codegen nodes.
This patch also removes VSETCC codegen nodes, unifying them with SETCC
nodes (codegen was actually often using SETCC for vector SETCC already).
This ensures that various DAG combiner optimizations kick in for vector
comparisons. Passes dragonegg bootstrap with no testsuite regressions
(nightly testsuite as well as "make check-all"). Patch mostly by
Nadav Rotem.
llvm-svn: 139159
Now the 'S' instructions, e.g. ADDS, treat S bit as optional operand as well.
Also fix isel hook to correctly set the optional operand.
rdar://10073745
llvm-svn: 139157
Even if there's no mode switch performed, the .code directive should still
be sent to the output streamer. Otherwise, for example, an output asm stream
is not equivalent to the input stream which generated it (a dependency on
the input target triple arm vs. thumb is introduced which was not originally
there).
llvm-svn: 139155
instructions are more aligned than the CPU requires, and adds some additional
directives, to follow in future patches. Patch by David Meyer!
llvm-svn: 139125
- On COFF the .lcomm directive has an alignment argument.
- On ELF we fall back to .local + .comm
Based on a patch by NAKAMURA Takumi.
Fixes PR9337, PR9483 and PR10128.
llvm-svn: 138976
When we want encoding T3 (the wide encoding), we can explicitly check for
that and twiddle the CanAcceptCarrySet accordingly. For now, just correctly
handle encodings T1 and T2 when in Thumb2 mode.
llvm-svn: 138879
When the destination register of an add immediate instruction is
explicitly specified, encoding T1 is preferred, else encoding T2 is
preferred.
llvm-svn: 138862
It appears that our use of the imp-use and imp-def flags with
sub-registers is not yet robust enough to support this.
The failing test case is complicated, I am working on a reduction.
<rdar://problem/10044201>
llvm-svn: 138861
Add a instruction flag: hasPostISelHook which tells the pre-RA scheduler to
call a target hook to adjust the instruction. For ARM, this is used to
adjust instructions which may be setting the 's' flag. ADC, SBC, RSB, and RSC
instructions have implicit def of CPSR (required since it now uses CPSR physical
register dependency rather than "glue"). If the carry flag is used, then the
target hook will *fill in* the optional operand with CPSR. Otherwise, the hook
will remove the CPSR implicit def from the MachineInstr.
llvm-svn: 138810
register dependency (rather than glue them together). This is general
goodness as it gives scheduler more freedom. However it is motivated by
a nasty bug in isel.
When a i64 sub is expanded to subc + sube.
libcall #1
\
\ subc
\ / \
\ / \
\ / libcall #2
sube
If the libcalls are not serialized (i.e. both have chains which are dag
entry), legalizer can serialize them in arbitrary orders. If it's
unlucky, it can force libcall #2 before libcall #1 in the above case.
subc
|
libcall #2
|
libcall #1
|
sube
However since subc and sube are "glued" together, this ends up being a
cycle when the scheduler combine subc and sube as a single scheduling
unit.
The right solution is to fix LegalizeType too chains the libcalls together.
However, LegalizeType is not processing nodes in order so that's harder than
it should be. For now, the move to physical register dependency will do.
rdar://10019576
llvm-svn: 138791
This handles only the handling of the IT instruction itself, not the
processing and validation of the instructions in the IT block. That's next,
and will include encoding tests for IT itself.
llvm-svn: 138665
This is the last disassembly crash detected by exhaustive Thumb2 instruction space. Major thanks to Chandler Carruth for making this kind of exhaustive testing possible.
llvm-svn: 138625
I don't really like the patterns, but I'm having trouble coming up with a
better way to handle them.
I plan on making other targets use the same legalization
ARM-without-memory-barriers is using... it's not especially efficient, but
if anyone cares, it's not that hard to fix for a given target if there's
some better lowering.
llvm-svn: 138621
Add the predicate operand to the instructions. Update the back end
accordingly where the instructions are used. Restrict the SP operands
to actually only be SP, as otherwise these break assembly parsing for the
normal instruction variants.
llvm-svn: 138445
It should go before AsmPrinter MC pseudo expansion since it's based on
MachineInstr, not MCInst. Otherwise any frame related pseudo instructions
may be missed.
llvm-svn: 138386
There is no non-writeback store multiple instruction in Thumb1, so
don't define one. As a result load multiple is the only instantiation of
the multiclass, so refactor that away entirely.
llvm-svn: 138338
This pleases the register scavenger and brings
test/CodeGen/ARM/2011-08-12-vmovqqqq-pseudo.ll a little closer to
working with -verify-machineinstrs.
llvm-svn: 138164
Fix base register type and canonicallize to the "ldm" spelling rather than
"ldmia." Add diagnostics for incorrect writeback token and out-of-range
registers.
llvm-svn: 137986
These fixups are handled poorly in general, and should have a single
contiguous range of bits per fixup type, but that's not how they're
currently organized, so for now in complex ones like for blx, we just tell the
emitter it's OK for the fixup to munge any bit it wants.
llvm-svn: 137947
Represent the operand value as it will be encoded in the instruction. This
allows removing the specialized encoder and decoder methods entirely. Add
an assembler match class while we're at it to lay groundwork for parsing the
thumb shift instructions.
llvm-svn: 137879
Thumb one requires that many arithmetic instruction forms have an 'S'
suffix. For Thumb2, the whether the suffix is required or precluded depends
on whether the instruction is in an IT block. Use target parser predicates
to check for these sorts of context-sensitive constraints.
llvm-svn: 137746
Allow a target assembly parser to do context sensitive constraint checking
on a potential instruction match. This will be used, for example, to handle
Thumb2 IT block parsing.
llvm-svn: 137675
Apparently we never added code to expand these pseudo instructions, and in
over a year, no one has noticed. Our register allocator must be awesome!
llvm-svn: 137551
Tidy up the code a bit and push the definition of the value next to the uses
to try to minimize this sort of issue from arising again while I'm at it.
rdar://9945172
llvm-svn: 137525
On Cortex-A8, we use the NEON v2f32 instructions for f32 arithmetic. For
better latency, we also send D-register copies down the NEON pipeline by
translating them to vorr instructions.
This patch promotes even S-register copies to D-register copies when
possible so they can also go down the NEON pipeline. Example:
vldr.32 s0, LCPI0_0
loop:
vorr d1, d0, d0
loop2:
...
vadd.f32 d1, d1, d16
The vorr instruction looked like this after regalloc:
%S2<def> = COPY %S0, %D1<imp-def>
Copies involving odd S-registers, and copies that don't define the full
D-register are left alone.
llvm-svn: 137182
This new disassembler can correctly decode all the testcases that the old one did, though
some "expected failure" testcases are XFAIL'd for now because it is not (yet) as strict in
operand checking as the old one was.
llvm-svn: 137144
More parsing support for indexed loads. Fix pre-indexed with writeback
parsing for register offsets and handle basic post-indexed offsets.
llvm-svn: 136982
Refactor STR[B] pre and post indexed instructions to use addressing modes for
memory operands, which is necessary for assembly parsing and is more consistent
with the rest of the memory instruction definitions. Make some incremental
progress on refactoring away the mega-operand addrmode2 along the way, which
is nice.
llvm-svn: 136978
Memory operand parsing is a bit haphazzard at the moment, in no small part
due to the even more haphazzard representations of memory operands in the .td
files. Start cleaning that all up, at least a bit.
The addressing modes in the .td files will be being simplified to not be
so monolithic, especially with regards to immediate vs. register offsets
and post-indexed addressing. addrmode3 is on its way with this patch, for
example.
This patch is foundational to enable going back to smaller incremental patches
for the individual memory referencing instructions themselves. It does just
enough to get the basics in place and handle the "make check" regression tests
we already have.
Follow-up work will be fleshing out the details and adding more robust test
cases for the individual instructions, starting with ARM mode and moving from
there into Thumb and Thumb2.
llvm-svn: 136845
Fix the instruction encoding for operands. Refactor mode to use explicit
instruction definitions per FIXME to be more consistent with loads/stores.
Fix disassembler accordingly. Add tests.
llvm-svn: 136509
Fill in the missing fixed bits and the register operand bits of the instruction
encoding. Refactor the definition to make the mode explicit, which is
consistent with how loads and stores are normally represented and makes
parsing much easier. Add parsing aliases for pseudo-instruction variants.
Update the disassembler for the new representations. Add tests for parsing and
encoding.
llvm-svn: 136479
This hidden llc option runs the machine code verifier after expanding
ARM pseudo-instructions, but before if-conversion.
The machine code verifier is much better at pointing out liveness errors
that can trip up the register scavenger.
llvm-svn: 136439
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
llvm-svn: 136433
Add parsing support for BLX (immediate). Since the register operand version is
predicated and the label operand version is not, we have to use some special
handling to get the operand list right for matching.
llvm-svn: 136406
Add parsing support that handles converting the lsb+width source into the
odd way we represent the instruction (an inverted bitfield mask).
llvm-svn: 136399
LLVM*AsmPrinter.
GenLibDeps.pl fails to detect vtable references. As this is the only
referenced symbol from LLVM*Desc to LLVM*AsmPrinter on optimized
builds, the algorithm that creates the list of libraries to be linked
into tools doesn't know about the dependency and sometimes places the
libraries on the wrong order, yielding error messages like this:
../../lib/libLLVMARMDesc.a(ARMMCTargetDesc.cpp.o): In function
`llvm::ARMInstPrinter::ARMInstPrinter(llvm::MCAsmInfo const&)':
ARMMCTargetDesc.cpp:(.text._ZN4llvm14ARMInstPrinterC1ERKNS_9MCAsmInfoE
[llvm::ARMInstPrinter::ARMInstPrinter(llvm::MCAsmInfo
const&)]+0x2a): undefined reference to `vtable for
llvm::ARMInstPrinter'
llvm-svn: 136328
This can happen in cases where TableGen generated asm matcher cannot check
whether a register operand is in the right register class. e.g. mem operands.
rdar://8204588
llvm-svn: 136292
Encode the width operand as it encodes in the instruction, which simplifies
the disassembler and the encoder, by using the imm1_32 operand def. Add a
diagnostic for the context-sensitive constraint that the width must be in
the range [1,32-lsb].
llvm-svn: 136264
Refactor the rest of the extend instructions to not artificially distinguish
between a rotate of zero and a rotate of any other value. Replace the by-zero
versions with Pat<>'s for ISel.
llvm-svn: 136226
Refactor the SXTB, SXTH, SXTB16, UXTB, UXTH, and UXTB16 instructions to not
have an 'r' and an 'r_rot' version, but just a single version with a rotate
that can be zero. Use plain Pat<>'s for the ISel of the non-rotated version.
llvm-svn: 136225
Allow the rot_imm operand to be optional. This sets the stage for refactoring
away the "rr" versions from the multiclasses and replacing them with Pat<>s.
llvm-svn: 136154
Start of cleaning this up a bit. First step is to remove the encoder hook by
storing the operand as the bits it'll actually encode to so it can just be
directly used. Map it to the assembly source values 8/16/24 when we print it.
llvm-svn: 136152
The first problem to fix is to stop creating synthetic *Table_gen
targets next to all of the LLVM libraries. These had no real effect as
CMake specifies that add_custom_command(OUTPUT ...) directives (what the
'tablegen(...)' stuff expands to) are implicitly added as dependencies
to all the rules in that CMakeLists.txt.
These synthetic rules started to cause problems as we started more and
more heavily using tablegen files from *subdirectories* of the one where
they were generated. Within those directories, the set of tablegen
outputs was still available and so these synthetic rules added them as
dependencies of those subdirectories. However, they were no longer
properly associated with the custom command to generate them. Most of
the time this "just worked" because something would get to the parent
directory first, and run tablegen there. Once run, the files existed and
the build proceeded happily. However, as more and more subdirectories
have started using this, the probability of this failing to happen has
increased. Recently with the MC refactorings, it became quite common for
me when touching a large enough number of targets.
To add insult to injury, several of the backends *tried* to fix this by
adding explicit dependencies back to the parent directory's tablegen
rules, but those dependencies didn't work as expected -- they weren't
forming a linear chain, they were adding another thread in the race.
This patch removes these synthetic rules completely, and adds a much
simpler function to declare explicitly that a collection of tablegen'ed
files are referenced by other libraries. From that, we can add explicit
dependencies from the smaller libraries (such as every architectures
Desc library) on this and correctly form a linear sequence. All of the
backends are updated to use it, sometimes replacing the existing attempt
at adding a dependency, sometimes adding a previously missing dependency
edge.
Please let me know if this causes any problems, but it fixes a rather
persistent and problematic source of build flakiness on our end.
llvm-svn: 136023
Fix the Rn register encoding for both SSAT and USAT. Update the parsing of the
shift operand to correctly handle the allowed shift types and immediate ranges
and issue meaningful diagnostics when an illegal value or shift type is
specified. Add aliases to parse an ommitted shift operand (default value of
'lsl #0').
Add tests for diagnostics and proper encoding.
llvm-svn: 135990
The shift immediate encoding, printing, etc. is handled directly by the
enclosing operand definition, so it should be a vanilla immediate, not a
nested complex operand (shift_imm).
llvm-svn: 135968
Remove some inititalizers that are the same as the default, move defs next to
their (singular) uses and generally simplify some formatting of asm operand
definitions.
llvm-svn: 135946
The immediate is in the range 1-32, but is encoded as 0-31 in a 5-bit bitfield.
Update the representation such that we store the operand as 0-31, allowing us
to remove the encoder method and the special case handling in the disassembler.
Update the assembly parser and the instruction printer accordingly.
llvm-svn: 135823
Aliases for LDM/STM. The single-register versions should encode to LDR/STR
with writeback, but we don't (yet) get that correct. Neither does Darwin's
system assembler, though, so that's not a deal-breaker of a limitation.
llvm-svn: 135702
Move the shift operator and special value (32 encoded as 0 for PKHTB) handling
into the instruction printer. This cleans up a bit of the disassembler
special casing for these instructions, more easily handles not printing the
operand at all for "lsl #0" and prepares for correct asm parsing of these
operands.
llvm-svn: 135626
Move common definitions for ARM and Thumb2 into ARMInstrFormats.td and rename
them to be a bit more descriptive that they're for the PKH instructions.
llvm-svn: 135617
The shift type is implied by the instruction (PKHBT vs. PKHTB) and so shouldn't
be also encoded as part of the shift value immediate. Otherwise we're able to
represent invalid instructions, plus it needlessly complicates the
representation. Preparatory work for asm parsing of these instructions.
llvm-svn: 135616
- Introduce JITDefault code model. This tells targets to set different default
code model for JIT. This eliminates the ugly hack in TargetMachine where
code model is changed after construction.
llvm-svn: 135580
The system register spec should be case insensitive. The preferred form for
output with mask values of 4, 8, and 12 references APSR rather than CPSR.
Update and tidy up tests accordingly.
llvm-svn: 135532
Correct the handling of the 's' suffix when parsing ARM mode. It's only a
truly separate opcode in Thumb. Add test cases to make sure we handle
the s and condition suffices correctly, including diagnostics.
llvm-svn: 135513
Add range checking for the immediate operand and handle the "mov" mnemonic
choosing between encodings based on the value of the immediate. Add tests
for fixups, encoding choice and values, and diagnostic for out of range values.
llvm-svn: 135500
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
llvm-svn: 135468
to MCRegisterInfo. Also initialize the mapping at construction time.
This patch eliminate TargetRegisterInfo from TargetAsmInfo. It's another step
towards fixing the layering violation.
llvm-svn: 135424
Original Log: Get rid of the separate opcodes for the Darwin versions of tBL, tBLXi, and tBLXr, using pseudo-instructions to lower to the single final opcode. Update the ARM disassembler for this change.
llvm-svn: 135414
backend. Moved some MCAsmInfo files down into the MCTargetDesc
sublibraries, removed some (i suspect long) dead files from other parts
of the CMake build, etc. Also copied the include directory hack from the
Makefile.
Finally, updated the lib deps. I spot checked this, and think its
correct, but review appreciated there.
llvm-svn: 135234
Consolidate the individual declarations together for ease of reference. This
mirrors the organization in X86, as well, so is good for consistency. No
functional change.
llvm-svn: 135179
Flesh out the options supported for the instruction. Shuffle tests a bit and
add entries for the rest of the options. Add an alias to handle the default
operand of "sy".
llvm-svn: 135109
Catch potential cascading errors on a malformed so_reg operand and bail after
the first error.
Add some tests for the diagnostics we do want.
llvm-svn: 135055
Now works for parsing register shifted register and register shifted
immediate arithmetic instructions, including the 'rrx' rotate with extend.
llvm-svn: 135049
Update the debug output interface for MCParsedAsmOperand to have a print()
method which takes an output stream argument, an << operator which invokes
the print method using the given stream, and a dump() method which prints
the operand to the dbgs() stream. This makes the interface more consistent
with the rest of LLVM, and more convenient to use at the debugger command
line.
llvm-svn: 135043
if (x != 0) x = 1
if (x == 1) x = 1
Previous codegen looks like this:
mov r1, r0
cmp r1, #1
mov r0, #0
moveq r0, #1
The naive lowering select between two different values. It should recognize the
test is equality test so it's more a conditional move rather than a select:
cmp r0, #1
movne r0, #0
rdar://9758317
llvm-svn: 135017
an assert on Darwin llvm-gcc builds.
Assertion failed: (castIsValid(op, S, Ty) && "Invalid cast!"), function Create, file /Users/buildslave/zorg/buildbot/smooshlab/slave-0.8/build.llvm-gcc-i386-darwin9-RA/llvm.src/lib/VMCore/Instructions.cpp, li\
ne 2067.
etc.
http://smooshlab.apple.com:8013/builders/llvm-gcc-i386-darwin9-RA/builds/2354
--- Reverse-merging r134893 into '.':
U include/llvm/Target/TargetData.h
U include/llvm/DerivedTypes.h
U tools/bugpoint/ExtractFunction.cpp
U unittests/Support/TypeBuilderTest.cpp
U lib/Target/ARM/ARMGlobalMerge.cpp
U lib/Target/TargetData.cpp
U lib/VMCore/Constants.cpp
U lib/VMCore/Type.cpp
U lib/VMCore/Core.cpp
U lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Instrumentation/ProfilingUtils.cpp
U lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/CodeGen/SjLjEHPrepare.cpp
--- Reverse-merging r134888 into '.':
G include/llvm/DerivedTypes.h
U include/llvm/Support/TypeBuilder.h
U include/llvm/Intrinsics.h
U unittests/Analysis/ScalarEvolutionTest.cpp
U unittests/ExecutionEngine/JIT/JITTest.cpp
U unittests/ExecutionEngine/JIT/JITMemoryManagerTest.cpp
U unittests/VMCore/PassManagerTest.cpp
G unittests/Support/TypeBuilderTest.cpp
U lib/Target/MBlaze/MBlazeIntrinsicInfo.cpp
U lib/Target/Blackfin/BlackfinIntrinsicInfo.cpp
U lib/VMCore/IRBuilder.cpp
G lib/VMCore/Type.cpp
U lib/VMCore/Function.cpp
G lib/VMCore/Core.cpp
U lib/VMCore/Module.cpp
U lib/AsmParser/LLParser.cpp
U lib/Transforms/Utils/CloneFunction.cpp
G lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Utils/InlineFunction.cpp
U lib/Transforms/Instrumentation/GCOVProfiling.cpp
U lib/Transforms/Scalar/ObjCARC.cpp
U lib/Transforms/Scalar/SimplifyLibCalls.cpp
U lib/Transforms/Scalar/MemCpyOptimizer.cpp
G lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/Transforms/IPO/ArgumentPromotion.cpp
U lib/Transforms/InstCombine/InstCombineCompares.cpp
U lib/Transforms/InstCombine/InstCombineAndOrXor.cpp
U lib/Transforms/InstCombine/InstCombineCalls.cpp
U lib/CodeGen/DwarfEHPrepare.cpp
U lib/CodeGen/IntrinsicLowering.cpp
U lib/Bitcode/Reader/BitcodeReader.cpp
llvm-svn: 134949
Print shifted immediate values directly rather than as a payload+shifter
value pair. This makes for more readable output assembly code, simplifies
the instruction printer, and is consistent with how Thumb immediates are
displayed.
llvm-svn: 134902
and MCSubtargetInfo.
- Added methods to update subtarget features (used when targets automatically
detect subtarget features or switch modes).
- Teach X86Subtarget to update MCSubtargetInfo features bits since the
MCSubtargetInfo layer can be shared with other modules.
- These fixes .code 16 / .code 32 support since mode switch is updated in
MCSubtargetInfo so MC code emitter can do the right thing.
llvm-svn: 134884
CPU, and feature string. Parsing some asm directives can change
subtarget state (e.g. .code 16) and it must be reflected in other
modules (e.g. MCCodeEmitter). That is, the MCSubtargetInfo instance
must be shared.
llvm-svn: 134795
The normal tBX instruction is predicable, so there's no reason the
pseudos for using it as a return shouldn't be. Gives us some nice code-gen
improvements as can be seen by the test changes. In particular, several
tests now have to disable if-conversion because it works too well and defeats
the test.
llvm-svn: 134746
Hook up the TableGen lowering for simple pseudo instructions for ARM and
use it for a subset of the many pseudos the backend has as proof of concept.
More conversions to come.
llvm-svn: 134705
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
llvm-svn: 134678
This allows us to remove the (bogus and unneeded) encoding information from
the pseudo-instruction class definitions. All of the pseudos that haven't
been converted yet and still need encoding information instance from the normal
instruction classes and explicitly set isCodeGenOnly, and so are distinct
from this change.
llvm-svn: 134540
If the function allocates reserved stack space for callee argument frames,
estimateStackSize() needs to account for that, as it doesn't show up as
ordinary frame objects. Otherwise, a callee with a large argument list will
throw off the calculations for whether to allocate an emergency spill slot
and we get assert() failures in the register scavenger.
rdar://9715469
llvm-svn: 134415
The DSP instructions in the Thumb2 instruction set are an optional extension
in the Cortex-M* archtitecture. When present, the implementation is considered
an "ARMv7E-M implementation," and when not, an "ARMv7-M implementation."
Add a subtarget feature hook for the v7e-m instructions and hook it up. The
cortex-m3 cpu is an example of a v7m implementation, while the cortex-m4 is
a v7e-m implementation.
rdar://9572992
llvm-svn: 134261
itineraries.
- Refactor TargetSubtarget to be based on MCSubtargetInfo.
- Change tablegen generated subtarget info to initialize MCSubtargetInfo
and hide more details from targets.
llvm-svn: 134257
t2MOVCC[ri] are just t2MOV[ri] instructions, so properly pseudo-ize them.
The Thumb1 versions, tMOVCC[ri] were only present for use by the size-
reduction pass, so they're no longer necessary at all and can be deleted.
llvm-svn: 134242
Merge the tMOVr, tMOVgpr2tgpr, tMOVtgpr2gpr, and tMOVgpr2gpr instructions
into tMOVr. There's no need to keep them separate. Giving the tMOVr
instruction the proper GPR register class for its operands is sufficient
to give the register allocator enough information to do the right thing
directly.
llvm-svn: 134204
Fix a FIXME and allow predication (in Thumb2) for the T1 register to
register MOV instructions. This allows some better codegen with
if-conversion (as seen in the test updates), plus it lays the groundwork
for pseudo-izing the tMOVCC instructions.
llvm-svn: 134197
It's just a t2LDMIA_UPD instruction with extra codegen properties, so it
doesn't need the encoding information. As a side-benefit, we now correctly
recognize for instruction printing as a 'pop' instruction.
llvm-svn: 134173
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
llvm-svn: 134127
Unlike Thumb1, Thumb2 does not have dedicated encodings for adjusting the
stack pointer. It can just use the normal add-register-immediate encoding
since it can use all registers as a source, not just R0-R7. The extra
instruction definitions are just duplicates of the normal instructions with
the (not well enforced) constraint that the source register was SP.
llvm-svn: 134114
already makes the assumption, which is correct on ARM, that a type's alignment is
less than its alloc size. This improves codegen with Clang (which inserts a lot of
extraneous alignment specifiers) and fixes <rdar://problem/9695089>.
llvm-svn: 134106
The tSpill and tRestore instructions are just copies of the tSTRspi and
tLDRspi instructions, respectively. Just use those directly instead.
llvm-svn: 134092
sink them into MC layer.
- Added MCInstrInfo, which captures the tablegen generated static data. Chang
TargetInstrInfo so it's based off MCInstrInfo.
llvm-svn: 134021
When the destination operand is the same as the first source register
operand for arithmetic instructions, the destination operand may be omitted.
For example, the following two instructions are equivalent:
and r1, #ff
and r1, r1, #ff
rdar://9672867
llvm-svn: 133973
Correctly parse the forms of the Thumb mov-immediate instruction:
1. 8-bit immediate 0-255.
2. 12-bit shifted-immediate.
The 16-bit immediate "movw" form is also legal with just a "mov" mnemonic,
but is not yet supported. More parser logic necessary there due to fixups.
llvm-svn: 133966
Thumb2 MOV mnemonic can accept both cc_out and predication. We don't (yet)
encode the instruction properly, but this gets the parsing part.
llvm-svn: 133945
Add aliases for the vpush/vpop mnemonics to the VFP load/store multiple
writeback instructions w/ SP as the base pointer.
rdar://9683231
llvm-svn: 133932
When the destination operand is the same as the first source register
operand for arithmetic instructions, the destination operand may be omitted.
For example, the following two instructions are equivalent:
sub r2, r2, #6
sub r2, #6
rdar://9682597
llvm-svn: 133925
Move the target-specific RecordRelocation logic out of the generic MC
MachObjectWriter and into the target-specific object writers. This allows
nuking quite a bit of target knowledge from the supposedly target-independent
bits in lib/MC.
llvm-svn: 133844
The fixup value comes in as the whole 32-bit value, so for the lo16 fixup,
the upper bits need to be masked off. Previously we assumed the masking had
already been done and asserted.
rdar://9635991
llvm-svn: 133818
instructions can be used to match combinations of multiply/divide and VCVT
(between floating-point and integer, Advanced SIMD). Basically the VCVT
immediate operand that specifies the number of fraction bits corresponds to a
floating-point multiply or divide by the corresponding power of 2.
For example, VCVT (floating-point to fixed-point, Advanced SIMD) can replace a
combination of VMUL and VCVT (floating-point to integer) as follows:
Example (assume d17 = <float 8.000000e+00, float 8.000000e+00>):
vmul.f32 d16, d17, d16
vcvt.s32.f32 d16, d16
becomes:
vcvt.s32.f32 d16, d16, #3
Similarly, VCVT (fixed-point to floating-point, Advanced SIMD) can replace a
combinations of VCVT (integer to floating-point) and VDIV as follows:
Example (assume d17 = <float 8.000000e+00, float 8.000000e+00>):
vcvt.f32.s32 d16, d16
vdiv.f32 d16, d17, d16
becomes:
vcvt.f32.s32 d16, d16, #3
llvm-svn: 133813
target machine from those that are only needed by codegen. The goal is to
sink the essential target description into MC layer so we can start building
MC based tools without needing to link in the entire codegen.
First step is to refactor TargetRegisterInfo. This patch added a base class
MCRegisterInfo which TargetRegisterInfo is derived from. Changed TableGen to
separate register description from the rest of the stuff.
llvm-svn: 133782
1. (((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8)
=> (bswap x) >> 16
2. ((x&0xff)<<8)|((x&0xff00)>>8)|((x&0xff000000)>>8)|((x&0x00ff0000)<<8))
=> (rotl (bswap x) 16)
This allows us to eliminate most of the def : Pat patterns for ARM rev16
revsh instructions. It catches many more cases for ARM and x86.
rdar://9609108
llvm-svn: 133503
Also switch the return type to ArrayRef<unsigned> which works out nicely
for ARM's implementation of this function because of the clever ArrayRef
constructors.
The name change indicates that the returned allocation order may contain
reserved registers as has been the case for a while.
llvm-svn: 133216
This is intended to support using REG_SEQUENCE SDNode's with type MVT::untyped, and is part of the long road to eliminating some of the hacks we currently use to support register pairs and other strange constraints, particularly on ARM NEON.
llvm-svn: 133178
accumulator forwarding. Specifically (from SVN log entry):
Distribute (A + B) * C to (A * C) + (B * C) to make use of NEON multiplier
accumulator forwarding:
vadd d3, d0, d1
vmul d3, d3, d2
=>
vmul d3, d0, d2
vmla d3, d1, d2
Make sure it catches cases where operand 1 is add/fadd/sub/fsub, which was
intended in the original revision.
llvm-svn: 133127
This simplifies many of the target description files since it is common
for register classes to be related or contain sequences of numbered
registers.
I have verified that this doesn't change the files generated by TableGen
for ARM and X86. It alters the allocation order of MBlaze GPR and Mips
FGR32 registers, but I believe the change is benign.
llvm-svn: 133105
the bits being cleared by the AND are not demanded by the BFI.
The previous BFI dag combine rule was actually incorrect (or used to be
correct until BFI representation changed).
rdar://9609030
llvm-svn: 133034
The logic for reserving R4 for use as a scratch needs to match that for
actually using it. Also, it's not necessary for immediate <=508, so adjust
the value checked.
llvm-svn: 132934
causing an assertion failure downstream. This fixes <rdar://problem/9562908>.
This really seems like it should always be set at CCState creation time, so mistakes like
this can never happen. I'll take a look at doing that.
llvm-svn: 132811
This is important for the correct lowering of unwind instructions
(which doesn't matter at all) and llvm.eh.resume calls (which does).
Take 2, now with more basic competence.
llvm-svn: 132295
This is important for the correct lowering of unwind instructions
(which doesn't matter at all) and llvm.eh.resume calls (which does).
llvm-svn: 132291
to load/store i64 values. Since there's no current support to explicitly
declare such restrictions, implement it by using specific hardcoded register
pairs during isel.
llvm-svn: 132248
register allocation dependent and will occasionally break. WIP in the
register allocator to model paired/etc registers.
rdar://9119939
llvm-svn: 132242
The practical effects here are that x86-64 fast-isel can now handle trunc from i8 to i1, and ARM fast-isel can handle many more constructs involving integers narrower than 32 bits (including loads, stores, and many integer casts).
rdar://9437928 .
llvm-svn: 132099
target register, matching BX. I filed this bug because I was confused at first:
PR10007 - ARM branch instructions have inconsistent predicate operand placement
<http://llvm.org/bugs/show_bug.cgi?id=10007>
llvm-svn: 132041
text section.
Assume the following bit of annotated assembly:
.section .data.rel.ro,"aw",%progbits
.align 2
.LAlpha:
.long startval(GOTOFF)
.text
.align 2
.type main,%function
.align 4
main: ;;; assume "main" starts at offset 0x20
0x0 push {r11, lr}
0x4 movw r0, :lower16:(.LAlpha-(.LBeta+8))
;;; ==> (.AddrOf(.LAlpha) - ((.AddrOf(.LBeta) - .AddrOf(".")) + 8)
;;; ==> (??? - ((16-4) + 8) = -20
0x8 movt r0, :upper16:(.LAlpha-(.LBeta+8))
;;; ==> (.AddrOf(.LAlpha) - ((.AddrOf(.LBeta) - .AddrOf(".")) + 8)
;;; ==> (??? - ((16-8) + 8) = -16
0xc ... blah
.LBeta:
0x10 add r0, pc, r0
0x14 ... blah
.LGamma:
0x18 add r1, pc, r1
Above snippet results in the following relocs in the .o file for the
first pair of movw/movt instructions
00000024 R_ARM_MOVW_PREL_NC .LAlpha
00000028 R_ARM_MOVT_PREL .LAlpha
And the encoded instructions in the .o file for main: must be
00000020 <main>:
20: e92d4800 push {fp, lr}
24: e30f0fec movw r0, #65516 ; 0xffec i.e. -20
28: e34f0ff0 movt r0, #65520 ; 0xfff0 i.e. -16
However, llc (prior to this commit) generates the following sequence
00000020 <main>:
20: e92d4800 push {fp, lr}
24: e30f0fec movw r0, #65516 ; 0xffec - i.e. -20
28: e34f0fff movt r0, #65535 ; 0xffff - i.e. -1
What has to happen in the ArmAsmBackend is that if the relocation is PC
relative, the 16 bits encoded as part of movw and movt must be both addends,
not addresses. It makes sense to encode addresses by right shifting the value
by 16, but the result is incorrect for PIC.
i.e., the right shift by 16 for movt is ONLY valid for the NON-PCRel case.
This change agrees with what GNU as does, and makes the PIC code run.
MC/ARM/elf-movt.s covers this case.
llvm-svn: 131674
("T is 1 if the target symbol S has type STT_FUNC and the
symbol addresses a Thumb instruction ;it is 0 otherwise."
from "ELF for the ARM Architecture" 4.7.1.2)
Patch by Koan-Sin Tan!
llvm-svn: 131406
intrinsic call. This prevents it from being reordered so that it appears
*before* the setjmp intrinsic (thus making it completely useless).
<rdar://problem/9409683>
llvm-svn: 131174
LiveVariables doesn't understand that clobbering D0 and D1 completely overwrites
Q0, so if Q0 is live-in to a function, its live range will extend beyond a
function call that only clobbers D0 and D1. This shows up in the
ARM/2009-11-01-NeonMoves test case.
LiveVariables should probably implement the much stricter rules for physreg
liveness that RAFast imposes - a physreg is killed by the first use of any
alias.
llvm-svn: 130801
model constants which can be added to base registers via add-immediate
instructions which don't require an additional register to materialize
the immediate.
llvm-svn: 130743
The hook will be used by the register allocator when recomputing register
classes after removing constraints.
Thumb1 code doesn't allow anything larger than tGPR, and x86 needs to ensure
that the spill size doesn't change.
llvm-svn: 130228
Fixes Thumb2 ADCS and SBCS lowering: <rdar://problem/9275821>.
t2ADCS/t2SBCS are now pseudo instructions, consistent with ARM, so the
assembly printer correctly prints the 's' suffix.
Fixes Thumb2 adde -> SBC matching to check for live/dead carry flags.
Fixes the internal ARM machine opcode mnemonic for ADCS/SBCS.
Fixes ARM SBC lowering to check for live carry (potential bug).
llvm-svn: 130048
add <rd>, sp, #<imm8>
ldr <rd>, [sp, #<imm8>]
When the offset from sp is multiple of 4 and in range of 0-1020.
This saves code size by utilizing 16-bit instructions.
rdar://9321541
llvm-svn: 129971
On the x86-64 and thumb2 targets, some registers are more expensive to encode
than others in the same register class.
Add a CostPerUse field to the TableGen register description, and make it
available from TRI->getCostPerUse. This represents the cost of a REX prefix or a
32-bit instruction encoding required by choosing a high register.
Teach the greedy register allocator to prefer cheap registers for busy live
ranges (as indicated by spill weight).
llvm-svn: 129864
Making use of VFP / NEON floating point multiply-accumulate / subtraction is
difficult on current ARM implementations for a few reasons.
1. Even though a single vmla has latency that is one cycle shorter than a pair
of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause
additional pipeline stall. So it's frequently better to single codegen
vmul + vadd.
2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to
stall for 4 cycles. We need to schedule them apart.
3. A vmla followed vmla is a special case. Obvious issuing back to back RAW
vmla + vmla is very bad. But this isn't ideal either:
vmul
vadd
vmla
Instead, we want to expand the second vmla:
vmla
vmul
vadd
Even with the 4 cycle vmul stall, the second sequence is still 2 cycles
faster.
Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough
but it isn't the optimial solution. This patch attempts to make it possible to
use vmla / vmls in cases where it is profitable.
A. Add missing isel predicates which cause vmla to be codegen'ed.
B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to
compute a fmul and a fmla.
C. Add additional isel checks for vmla, avoid cases where vmla is feeding into
fp instructions (except for the #3 exceptional case).
D. Add ARM hazard recognizer to model the vmla / vmls hazards.
E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the
vmla / vmls will trigger one of the special hazards.
Enable these fp vmlx codegen changes for Cortex-A9.
llvm-svn: 129775
Add a avoidWriteAfterWrite() target hook to identify register classes that
suffer from write-after-write hazards. For those register classes, try to avoid
writing the same register in two consecutive instructions.
This is currently disabled by default. We should not spill to avoid hazards!
The command line flag -avoid-waw-hazard can be used to enable waw avoidance.
llvm-svn: 129772
is, it assumes addresses are 64-bit aligned (which should be the more common
case). If the alignment is found not to be aligned, then getOperandLatency()
would adjust the operand latency computation by one to compensate for it.
rdar://9294833
llvm-svn: 129742
The ARMARM specifies these instructions as unpredictable when storing the
writeback register. This shouldn't affect code generation much since storing a
pointer to itself is quite rare.
llvm-svn: 129409
disassembler API. Hooked this up to the ARM target so such tools as Darwin's
otool(1) can now print things like branch targets for example this:
blx _puts
instead of this:
blx #-36
And even print the expression encoded in the Mach-O relocation entried for
things like this:
movt r0, :upper16:((_foo-_bar)+1234)
llvm-svn: 129284
The previous cleanup of LDRD got overzealous and removed it, causing post-RA
scheduling to get overzealous in breaking antidependencies and invalidate these instructions. Hilarity and invalid assembly ensued.
rdar://9244161
llvm-svn: 129144
Since these "Advanced SIMD and VFP" instructions have more specfic encoding bits
specified, if coproc == 10 or 11, we should reject the insn as invalid.
rdar://problem/9239922
rdar://problem/9239596
llvm-svn: 129027
Add more complete sanity check for LdStFrm instructions where if IBit (Inst{25})
is 1, Inst{4} should be 0. Otherwise, we should reject the insn as invalid.
rdar://problem/9239347
rdar://problem/9239467
llvm-svn: 128977
Qd -> bit[12] == 0
Qn -> bit[16] == 0
Qm -> bit[0] == 0
If one of these bits is 1, the instruction is UNDEFINED.
rdar://problem/9238399
rdar://problem/9238445
llvm-svn: 128949
For register-controlled shifts, we should check that the encoding constraint
Inst{7} = 0 and Inst{4} = 1 is satisfied.
rdar://problem/9237693
llvm-svn: 128941
An alternative syntax is available for a modified immediate constant that permits the programmer to specify
the encoding directly. In this syntax, #<const> is instead written as #<byte>,#<rot>, where:
<byte> is the numeric value of abcdefgh, in the range 0-255
<rot> is twice the numeric value of rotation, an even number in the range 0-30.
llvm-svn: 128897
It needed to be moved closer to the setjmp statement, because the code directly
after the setjmp needs to know about values that are on the stack. Also, the
'bitcast' of the function context was causing a dead load. This wouldn't be too
horrible, except that at -O0 it wasn't optimized out, and because it wasn't
using the correct base pointer (if there is a VLA), it would try to access a
value from a garbage address.
<rdar://problem/9130540>
llvm-svn: 128873
rdar://problem/9229922 ARM disassembler discrepancy: erroneously accepting RFE
Also LDC/STC instructions are predicated while LDC2/STC2 instructions are not, fixed while
doing regression testings.
llvm-svn: 128859
also fix the encoding of the later.
- Add a new encoding bit to describe the index mode used in AM3.
- Teach printAddrMode3Operand to check by the addressing mode which
index mode to print.
- Testcases.
llvm-svn: 128832
registers that arise from argument shuffling with the soft float ABI. These
instructions are particularly slow on Cortex A8. This fixes one half of
<rdar://problem/8674845>.
llvm-svn: 128759
all LDR/STR changes and left them to a future patch. Passing all
checks now.
- Implement asm parsing support for LDRT, LDRBT, STRT, STRBT and
fix the encoding wherever is possible.
- Add a new encoding bit to describe the index mode used and teach
printAddrMode2Operand to check by the addressing mode which index
mode to print.
- Testcases
llvm-svn: 128689
- Implement asm parsing support for LDRT, LDRBT, STRT, STRBT and
{STR,LDC}{2}_{PRE,POST} fixing the encoding wherever is possible.
- Move all instructions which use am2offset without a pattern to use
addrmode2.
- Add a new encoding bit to describe the index mode used and teach
printAddrMode2Operand to check by the addressing mode which index
mode to print.
- Testcases
llvm-svn: 128632
{STR,LDC}{2}_PRE.
- Fixed the encoding in some places.
- Some of those instructions were using am2offset and now use addrmode2.
Codegen isn't affected, instructions which use SelectAddrMode2Offset were not
touched.
- Teach printAddrMode2Operand to check by the addressing mode which index
mode to print.
- This is a work in progress, more work to come. The idea is to change places
which use am2offset to use addrmode2 instead, as to unify assembly parser.
- Add testcases for assembly parser
llvm-svn: 128585
was lowering them to sext / uxt + mul instructions. Unfortunately the
optimization passes may hoist the extensions out of the loop and separate them.
When that happens, the long multiplication instructions can be broken into
several scalar instructions, causing significant performance issue.
Note the vmla and vmls intrinsics are not added back. Frontend will codegen them
as intrinsics vmull* + add / sub. Also note the isel optimizations for catching
mul + sext / zext are not changed either.
First part of rdar://8832507, rdar://9203134
llvm-svn: 128502
isel lowering to fold the zero-extend's and take advantage of no-stall
back to back vmul + vmla:
vmull q0, d4, d6
vmlal q0, d5, d6
is faster than
vaddl q0, d4, d5
vmovl q1, d6
vmul q0, q0, q1
This allows us to vmull + vmlal for:
f = vmull_u8( vget_high_u8(s), c);
f = vmlal_u8(f, vget_low_u8(s), c);
rdar://9197392
llvm-svn: 128444
masks to match inversely for the code as is to work. For the example given
we actually want:
bfi r0, r2, #1, #1
not #0, however, given the way the pattern is written it's not possible
at the moment.
Fixes rdar://9177502
llvm-svn: 128320
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add a test case.
llvm-svn: 128240
Set the encoding bits to {0,?,?,0}, not 0. Plus delegate the disassembly of ADR to
the more generic ADDri/SUBri instructions, and add a test case for that.
llvm-svn: 128234
entries being compared may not be ARMConstantPoolValue. Without checking
whether they are ARMConstantPoolValue first, and if the stars and moons
are aligned properly, the equality test may return true (when the first few
words of two Constants' values happen to be identical) and very bad things can
happen.
rdar://9125354
llvm-svn: 128203
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add two test cases.
llvm-svn: 128191
were incomplete. The assert stmt needs to be updated and the operand index incrment is wrong.
Fix the bad logic and add some sanity checking to detect bad instruction encoding;
and add a test case.
llvm-svn: 128186
int tries = INT_MAX;
while (tries > 0) {
tries--;
}
The check should be:
subs r4, #1
cmp r4, #0
bgt LBB0_1
The subs can set the overflow V bit when r4 is INT_MAX+1 (which loop
canonicalization apparently does in this case). cmp #0 would have cleared
it while not changing the N and Z bits. Since BGT is dependent on the V
bit, i.e. (N == V) && !Z, it is not safe to eliminate the cmp #0.
rdar://9172742
llvm-svn: 128179
VFP Load/Store Multiple Instructions used to embed the IA/DB addressing mode within the
MC instruction; that has been changed so that now, for example, VSTMDDB_UPD and VSTMDIA_UPD
are two instructions. Update the ARMDisassemblerCore.cpp's DisassembleVFPLdStMulFrm()
to reflect the change.
Also add a test case.
llvm-svn: 128103
the alias of an InstAlias instead of the thing being aliased. Because we need to
know the features that are valid for an InstAlias.
This is part of a work-in-progress.
llvm-svn: 127986
to have single return block (at least getting there) for optimizations. This
is general goodness but it would prevent some tailcall optimizations.
One specific case is code like this:
int f1(void);
int f2(void);
int f3(void);
int f4(void);
int f5(void);
int f6(void);
int foo(int x) {
switch(x) {
case 1: return f1();
case 2: return f2();
case 3: return f3();
case 4: return f4();
case 5: return f5();
case 6: return f6();
}
}
=>
LBB0_2: ## %sw.bb
callq _f1
popq %rbp
ret
LBB0_3: ## %sw.bb1
callq _f2
popq %rbp
ret
LBB0_4: ## %sw.bb3
callq _f3
popq %rbp
ret
This patch teaches codegenprep to duplicate returns when the return value
is a phi and where the phi operands are produced by tail calls followed by
an unconditional branch:
sw.bb7: ; preds = %entry
%call8 = tail call i32 @f5() nounwind
br label %return
sw.bb9: ; preds = %entry
%call10 = tail call i32 @f6() nounwind
br label %return
return:
%retval.0 = phi i32 [ %call10, %sw.bb9 ], [ %call8, %sw.bb7 ], ... [ 0, %entry ]
ret i32 %retval.0
This allows codegen to generate better code like this:
LBB0_2: ## %sw.bb
jmp _f1 ## TAILCALL
LBB0_3: ## %sw.bb1
jmp _f2 ## TAILCALL
LBB0_4: ## %sw.bb3
jmp _f3 ## TAILCALL
rdar://9147433
llvm-svn: 127953
The relevant instruction table entries were changed sometime ago to no longer take
<Rt2> as an operand. Modify ARMDisassemblerCore.cpp to accomodate the change and
add a test case.
llvm-svn: 127935
o A8.6.195 STR (register) -- Encoding T1
o A8.6.193 STR (immediate, Thumb) -- Encoding T1
It has been changed so that now they use different addressing modes
and thus different MC representation (Operand Infos). Modify the
disassembler to reflect the change, and add relevant tests.
llvm-svn: 127833
1. The ARM Darwin *r9 call instructions were pseudo-ized recently.
Modify the ARMDisassemblerCore.cpp file to accomodate the change.
2. The disassembler was unnecessarily adding 8 to the sign-extended imm24:
imm32 = SignExtend(imm24:'00', 32); // A8.6.23 BL, BLX (immediate)
// Encoding A1
It has no business doing such. Removed the offending logic.
Add test cases to arm-tests.txt.
llvm-svn: 127707
Also more cleanly separate the ARM vs. Thumb functionality. Previously, the
encoding would be incorrect for some Thumb instructions (the indirect calls).
llvm-svn: 127637
actual instruction as the non-Darwin defs, but have different call-clobber
semantics and so need separate patterns. They don't need to duplicate the
encoding information, however.
llvm-svn: 127515
The insufficient encoding information of the combined instruction confuses the decoder wrt
UQADD16. Add extra logic to recover from that.
Fixed an assert reported by Sean Callanan
llvm-svn: 127354
D registers since the vpush list may not have gaps. Make sure the stack
adjustment instruction isn't moved between them. Ditto for vpop in
epilogues.
Sorry, can't reduce a small test case.
rdar://9043312
llvm-svn: 126457
The previous codegen for the slow path (when values are in VFP / NEON
registers) was incorrect if the source is NaN.
The new codegen uses NEON vbsl instruction to copy the sign bit. e.g.
vmov.i32 d1, #0x80000000
vbsl d1, d2, d0
If NEON is not available, it uses integer instructions to copy the sign bit.
rdar://9034702
llvm-svn: 126295
In other words, do not keep track of argument's location. The debugger (gdb) is not prepared to see line table entries for arguments. For the debugger, "second" line table entry marks beginning of function body.
This requires some coordination with debugger to get this working.
- The debugger needs to be aware of prolog_end attribute attached with line table entries.
- The compiler needs to accurately mark prolog_end in line table entries (at -O0 and at -O1+)
llvm-svn: 126155
of testing for its presence at cmake time.
This way the build automatically regenerates the makefiles when a svn
update brings in a new sublibrary.
llvm-svn: 126068
No one uses *-mingw64. mingw-w64 is represented as {i686|x86_64}-w64-mingw32. In llvm side, i686 and x64 can be treated as similar way.
llvm-svn: 125747
This is necessary to avoid a crash in certain tangled situations where a kill
flag is first correctly moved to a merged instruction, and then needs to be
moved again:
STR %R0, a...
STR %R0<kill>, b...
First becomes:
STR %R0, b...
STM a, %R0<kill>, ...
and then:
STM a, %R0, ...
STM b, %R0<kill>, ...
We can now remove the kill flag from the merged STM when needed. 8960050.
llvm-svn: 125591
- Add custom operand matching for imod and iflags.
- Rename SplitMnemonicAndCC to SplitMnemonic since it splits more than CC
from mnemonic.
- While adding ".w" as an operand, don't change "Head" to avoid passing the
wrong mnemonic to ParseOperand.
- Add asm parser tests.
- Add disassembler tests just to make sure it can catch all cps versions.
llvm-svn: 125489
have their low bits set to zero. This allows us to optimize
out explicit stack alignment code like in stack-align.ll:test4 when
it is redundant.
Doing this causes the code generator to start turning FI+cst into
FI|cst all over the place, which is general goodness (that is the
canonical form) except that various pieces of the code generator
don't handle OR aggressively. Fix this by introducing a new
SelectionDAG::isBaseWithConstantOffset predicate, and using it
in places that are looking for ADD(X,CST). The ARM backend in
particular was missing a lot of addressing mode folding opportunities
around OR.
llvm-svn: 125470
Teach the AsmMatcher handling to distinguish between an error custom-parsing
an operand and a failure to match. The former should propogate the error
upwards, while the latter should continue attempting to parse with
alternative matchers.
Update the ARM asm parser accordingly.
llvm-svn: 125426
This
define float @foo(float %x, float %y) nounwind readnone {
entry:
%0 = tail call float @copysignf(float %x, float %y) nounwind readnone
ret float %0
}
Was compiled to:
vmov s0, r1
bic r0, r0, #-2147483648
vmov s1, r0
vcmpe.f32 s0, #0
vmrs apsr_nzcv, fpscr
it lt
vneglt.f32 s1, s1
vmov r0, s1
bx lr
This fails to copy the sign of -0.0f because it's lost during the float to int
conversion. Also, it's sub-optimal when the inputs are in GPR registers.
Now it uses integer and + or operations when it's profitable. And it's correct!
lsrs r1, r1, #31
bfi r0, r1, #31, #1
bx lr
rdar://8984306
llvm-svn: 125357
t2LDRpci with t2LDRi12.
There are a couple of problems with this.
1. The encoding for the literal and immediate constant are different.
Note bit 7 of the literal case is 'U' so it can be negative.
2. t2LDRi12 is now narrowed to tLDRpci before constant island pass is run.
So we end up never using the Thumb2 instruction, which ends up creating a
lot more constant islands.
llvm-svn: 125074
parsing of operands introduced in r125030. As a small note, besides using a more
generic approach we can also have more descriptive output when debugging
llvm-mc, example:
mcr p7, #1, r5, c1, c1, #4
note: parsed instruction:
['mcr', <ARMCC::al>,
<coprocessor number: 7>,
1,
<register 73>,
<coprocessor register: 1>,
<coprocessor register: 1>,
4]
llvm-svn: 125052
The vld1-lane, vld1-dup and vst1-lane instructions do not yet support using
post-increment versions, but all the rest of the NEON load/store instructions
should be handled now.
llvm-svn: 125014
These operations are expanded to pairs of loads or stores, and the first one
uses the address register update to produce the address for the second one.
So far, the second load/store has also updated the address register, just
for convenience, since that output has never been used. In anticipation of
actually supporting post-increment updates for these operations, this changes
the non-updating operations to use a non-updating load/store for the second
instruction.
llvm-svn: 125013
(yes, this is different from R_ARM_CALL)
- Adds a new method getARMBranchTargetOpValue() which handles the
necessary distinction between the conditional and unconditional br/bl
needed for ARM/ELF
At least for ARM mode, the needed fixup for conditional versus unconditional
br/bl is identical, but the ARM docs and existing ARM tools expect this
reloc type...
Added a few FIXME's for future naming fixups in ARMInstrInfo.td
llvm-svn: 124895
the load, then it may be legal to transform the load and store to integer
load and store of the same width.
This is done if the target specified the transformation as profitable. e.g.
On arm, this can transform:
vldr.32 s0, []
vstr.32 s0, []
to
ldr r12, []
str r12, []
rdar://8944252
llvm-svn: 124708
clang's -Wuninitialized-experimental warning.
While these don't look like real bugs, clang's
-Wuninitialized-experimental analysis is stricter
than GCC's, and these fixes have the benefit
of being general nice cleanups.
llvm-svn: 124073
1. Fixed ARM pc adjustment.
2. Fixed dynamic-no-pic codegen
3. CSE of pc-relative load of global addresses.
It's now enabled by default for Darwin.
llvm-svn: 123991
qadd and qdadd uses "rd, rm, rn", the same applies to the 'sub' variants. This
is described in ARM manuals and matches the encoding used by the gnu assembler.
llvm-svn: 123975
flags. They are still not enable in this revision.
Added TargetInstrInfo::isZeroCost() to fix a fundamental problem with
the scheduler's model of operand latency in the selection DAG.
Generalized unit tests to work with sched-cycles.
llvm-svn: 123969
value, the "add pc" must be CSE'ed at the same time. We could follow the same
approach as T2 by adding pseudo instructions that combine the ldr + "add pc".
But the better approach is to use movw + movt (which I will enable soon), so
I'll leave this as a TODO.
llvm-svn: 123949
in cdp/cdp2 instructions. Also increase the hack with cdp/cdp2 instructions.
- Fix the encoding of cdp/cdp2 instructions for ARM (no thumb and thumb2 yet) and add testcases for t
hem.
llvm-svn: 123927
TargetInstrInfo:
Change produceSameValue() to take MachineRegisterInfo as an optional argument.
When in SSA form, targets can use it to make more aggressive equality analysis.
Machine LICM:
1. Eliminate isLoadFromConstantMemory, use MI.isInvariantLoad instead.
2. Fix a bug which prevent CSE of instructions which are not re-materializable.
3. Use improved form of produceSameValue.
ARM:
1. Teach ARM produceSameValue to look pass some PIC labels.
2. Look for operands from different loads of different constant pool entries
which have same values.
3. Re-implement PIC GA materialization using movw + movt. Combine the pair with
a "add pc" or "ldr [pc]" to form pseudo instructions. This makes it possible
to re-materialize the instruction, allow machine LICM to hoist the set of
instructions out of the loop and make it possible to CSE them. It's a bit
hacky, but it significantly improve code quality.
4. Some minor bug fixes as well.
With the fixes, using movw + movt to materialize GAs significantly outperform the
load from constantpool method. 186.crafty and 255.vortex improved > 20%, 254.gap
and 176.gcc ~10%.
llvm-svn: 123905
of the floating point types less than 64-bits. It's somewhat of a temporary
hack but forces more accurate modeling of register pressure and results
in fewer spills.
llvm-svn: 123811
movw r0, :lower16:(L_foo$non_lazy_ptr-(LPC0_0+4))
movt r0, :upper16:(L_foo$non_lazy_ptr-(LPC0_0+4))
LPC0_0:
add r0, pc, r0
It's not yet enabled by default as some tests are failing. I suspect bugs in
down stream tools.
llvm-svn: 123619
- Fixed :upper16: fix up routine. It should be shifting down the top 16 bits first.
- Added support for Thumb2 :lower16: and :upper16: fix up.
- Added :upper16: and :lower16: relocation support to mach-o object writer.
llvm-svn: 123424
the symbolic immediate names used for these instructions, fixing their pretty-printers, and
adding proper encoding information for them.
With this, we can properly pretty-print and encode assembly like:
mrc p15, #0, r3, c13, c0, #3
Fixes <rdar://problem/8857858>.
llvm-svn: 123404
set up the source operands. The original instr has an immediate operand that
should be replaced with the frame reg operand rather than just adding the
reg operand. Previously, the instruction ended up with too many operands
causing an assert() when adding the default predicate. rdar://8825456
llvm-svn: 123387
in the right direction. It eliminated some hacks and will unblock codegen
work. But it's far from being done. It doesn't reject illegal expressions,
e.g. (FOO - :lower16:BAR). It also doesn't work in Thumb2 mode at all.
llvm-svn: 123369
.code 32 if the TargetMachine's isThumb() boolean does not match. The correct
fix is to switch ARM subtargets at that point and is tracked by rdar://8856789
which is bigger task.
llvm-svn: 123353
that way, unfortunately. If you want to change them to work additively instead
of a one-variant-kind-per-symbolref, that's great and I completely agree it's
worth doing, but it really should be a separate patch. Until then, this isn't
correct."
So I am reverting this bit until a more opportune time.
llvm-svn: 123340
R_ARM_MOVT_PREL and R_ARM_MOVW_PREL_NC.
2. Fix minor bug in ARMAsmPrinter - treat bitfield flag as a bitfield, not an enum.
3. Add support for 3 new elf section types (no-ops)
llvm-svn: 123294
carry setting flag from the mnemonic.
Note that this currently involves me disabling a number of working cases in
arm_instructions.s, this is a hopefully short term evil which will be rapidly
fixed (and greatly surpassed), assuming my current approach flies.
llvm-svn: 123238
Instead encode llvm IR level property "HasSideEffects" in an operand (shared
with IsAlignStack). Added MachineInstrs::hasUnmodeledSideEffects() to check
the operand when the instruction is an INLINEASM.
This allows memory instructions to be moved around INLINEASM instructions.
llvm-svn: 123044
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.
The test changes are needed to keep those spill-q tests from testing aligned
spills and restores. If the only aligned stack objects are spill slots, we
no longer realign the stack frame. Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.
llvm-svn: 122995
DAG scheduling during isel. Most new functionality is currently
guarded by -enable-sched-cycles and -enable-sched-hazard.
Added InstrItineraryData::IssueWidth field, currently derived from
ARM itineraries, but could be initialized differently on other targets.
Added ScheduleHazardRecognizer::MaxLookAhead to indicate whether it is
active, and if so how many cycles of state it holds.
Added SchedulingPriorityQueue::HasReadyFilter to allowing gating entry
into the scheduler's available queue.
ScoreboardHazardRecognizer now accesses the ScheduleDAG in order to
get information about it's SUnits, provides RecedeCycle for bottom-up
scheduling, correctly computes scoreboard depth, tracks IssueCount, and
considers potential stall cycles when checking for hazards.
ScheduleDAGRRList now models machine cycles and hazards (under
flags). It tracks MinAvailableCycle, drives the hazard recognizer and
priority queue's ready filter, manages a new PendingQueue, properly
accounts for stall cycles, etc.
llvm-svn: 122541
If the basic block containing the BCCi64 (or BCCZi64) instruction ends with
an unconditional branch, that branch needs to be deleted before appending
the expansion of the BCCi64 to the end of the block.
llvm-svn: 122521
Type legalization splits up i64 values into pairs of i32 values, which leads
to poor quality code when inserting or extracting i64 vector elements.
If the vector element is loaded or stored, it can be treated as an f64 value
and loaded or stored directly from a VPR register. Use the pre-legalization
DAG combiner to cast those vector elements to f64 types so that the type
legalizer won't mess them up. Radar 8755338.
llvm-svn: 122319
to be the one we want to use. bugpoint reduced testcase is a little large,
I'll see if I can simplify it down more.
Fixes part of rdar://8782207
llvm-svn: 122307
tPseudoInst class, its size was changed from "special" to "2 bytes". This is
incorrect because the jump table will no longer be taken into account when
calculating branch offsets.
<rdar://problem/8782216>
llvm-svn: 122303
ARM::tMOVgpr2gpr. But this check didn't change. As a result, we were getting
misaligned references to the jump table from an ADR instruction.
There is a test case, but unfortunately it's sensitive to random code changes.
<rdar://problem/8782223>
llvm-svn: 122131
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
llvm-svn: 122104
Jim Grosbach