Add these transformations to the existing add/sub ones:
(and (select cc, -1, c), x) -> (select cc, x, (and, x, c))
(or (select cc, 0, c), x) -> (select cc, x, (or, x, c))
(xor (select cc, 0, c), x) -> (select cc, x, (xor, x, c))
The selects can then be transformed to a single predicated instruction
by peephole.
This transformation will make it possible to eliminate the ISD::CAND,
COR, and CXOR custom DAG nodes.
llvm-svn: 162176
arithmetic instructions. However, when small data types are used, a truncate
node appears between the SETCC node and the arithmetic operation. This patch
adds support for this pattern.
Before:
xorl %esi, %edi
testb %dil, %dil
setne %al
ret
After:
xorb %dil, %sil
setne %al
ret
rdar://12081007
llvm-svn: 162160
No new tests are added.
All tests in ExecutionEngine/MCJIT that have been failing pass after this patch
is applied (when "make check" is done on a mips board).
Patch by Petar Jovanovic.
llvm-svn: 162135
PEI can't handle the pseudo-instructions. This can be removed when the
pseudo-instructions are replaced by normal predicated instructions.
Fixes PR13628.
llvm-svn: 162130
make it more consistent with its intended semantics.
The `linker_private_weak_def_auto' linkage type was meant to automatically hide
globals which never had their addresses taken. It has nothing to do with the
`linker_private' linkage type, which outputs the symbols with a `l' (ell) prefix
among other things.
The intended semantic is more like the `linkonce_odr' linkage type.
Change the name of the linkage type to `linkonce_odr_auto_hide'. And therefore
changing the semantics so that it produces the correct output for the linker.
Note: The old linkage name `linker_private_weak_def_auto' will still parse but
is not a synonym for `linkonce_odr_auto_hide'. This should be removed in 4.0.
<rdar://problem/11754934>
llvm-svn: 162114
It is not my plan to duplicate the entire ARM instruction set with
predicated versions. We need a way of representing predicated
instructions in SSA form without requiring a separate opcode.
Then the pseudo-instructions can go away.
llvm-svn: 162061
Without fastcc support, the caller just falls through to CallingConv::C
for fastcc, but callee still uses fastcc, this inconsistency of calling
convention is a problem, and fastcc support can fix it.
llvm-svn: 162013
The ARM select instructions are just predicated moves. If the select is
the only use of an operand, the instruction defining the operand can be
predicated instead, saving one instruction and decreasing register
pressure.
This implementation can turn AND/ORR/EOR instructions into their
corresponding ANDCC/ORRCC/EORCC variants. Ideally, we should be able to
predicate any instruction, but we don't yet support predicated
instructions in SSA form.
llvm-svn: 161994
When predicating this instruction:
Rd = ADD Rn, Rm
We need an extra operand to represent the value given to Rd when the
predicate is false:
Rd = ADDCC Rfalse, Rn, Rm, pred
The Rd and Rfalse operands are different registers while in SSA form.
Rfalse is tied to Rd to make sure they get the same register during
register allocation.
Previously, Rd and Rn were tied, but that is not required.
Compare to MOVCC:
Rd = MOVCC Rfalse, Rtrue, pred
llvm-svn: 161955
reversed. This leads to wrong codegen for float-to-half conversion
intrinsics which are used to support storage-only fp16 type.
NEON variants of same instructions are fine.
llvm-svn: 161907
- FP_EXTEND only support extending from vectors with matching elements.
This results in the scalarization of extending to v2f64 from v2f32,
which will be legalized to v4f32 not matching with v2f64.
- add X86-specific VFPEXT supproting extending from v4f32 to v2f64.
- add BUILD_VECTOR lowering helper to recover back the original
extending from v4f32 to v2f64.
- test case is enhanced to include different vector width.
llvm-svn: 161894
Refactor the TableGen'erated fixed length disassemblmer to use a
table-driven state machine rather than a massive set of nested
switch() statements.
As a result, the ARM Disassembler (ARMDisassembler.cpp) builds much more
quickly and generates a smaller end result. For a Release+Asserts build on
a 16GB 3.4GHz i7 iMac w/ SSD:
Time to compile at -O2 (averaged w/ hot caches):
Previous: 35.5s
New: 8.9s
TEXT size:
Previous: 447,251
New: 297,661
Builds in 25% of the time previously required and generates code 66% of
the size.
Execution time of the disassembler is only slightly slower (7% disassembling
10 million ARM instructions, 19.6s vs 21.0s). The new implementation has
not yet been tuned, however, so the performance should almost certainly
be recoverable should it become a concern.
llvm-svn: 161888
It never does anything when running 'make check', and it get's in the
way of updating live intervals in 2-addr.
The hook was originally added to help form IT blocks in Thumb2 code
before register allocation, but the pass ordering has changed since
then, and we run if-conversion after register allocation now.
When the MI scheduler is enabled, there will be no less than two
schedulers between 2-addr and Thumb2ITBlockPass, so this hook is
unlikely to help anything.
llvm-svn: 161794
Previously, we used VLD1.32 in all cases, however there are both 16 and 64-bit
accesses being selected, so we need to use an appropriate width load in those
cases.
llvm-svn: 161748
- FCMOV only supports a subset of X86 conditions. Skip boolean
simplification if X86 condition is not valid for FCMOV.
- add a minimal test case for PR13577.
llvm-svn: 161732
FeatureFastUAMem for Nehalem, Westmere and Sandy Bridge.
FeatureFastUAMem is already on if we pass in nehalem or westmere as a command
argument.
rdar: 7252306
llvm-svn: 161717
- if a boolean test (X86ISD::CMP or X86ISD:SUB) checks a boolean value
generated from X86ISD::SETCC, try to simplify the boolean value
generation and checking by reusing the original EFLAGS with proper
condition code
- add hooks to X86 specific SETCC/BRCOND/CMOV, the major 3 places
consuming EFLAGS
part of patches fixing PR12312
llvm-svn: 161687
the register info for getEncodingValue. This builds on the
small patch of yesterday to set HWEncoding in the register
file.
One (deprecated) use was turned into a hard number to avoid
needing register info in the old JIT.
llvm-svn: 161628
This new API will be used by clang to parse ms-style inline asms.
One goal of this project is to use this style of inline asm for targets other
then x86. Therefore, this API needs to be implemented for non-x86 targets at
some point in the future.
llvm-svn: 161624
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
llvm-svn: 161581
This way of using getNextOperandForReg() was unlikely to work as
intended. We don't give any guarantees about the order of operands in
the use-def chains, so looking only at operands following a given
operand in the chain doesn't make sense.
llvm-svn: 161542
We perform the following:
1> Use SUB instead of CMP for i8,i16,i32 and i64 in ISel lowering.
2> Modify MachineCSE to correctly handle implicit defs.
3> Convert SUB back to CMP if possible at peephole.
Removed pattern matching of (a>b) ? (a-b):0 and like, since they are handled
by peephole now.
rdar://11873276
llvm-svn: 161462
We can't rematerialize a PIC base after register allocation anyway, and
scanning physreg use-def chains is very expensive in a function with
many calls.
<rdar://problem/12047515>
llvm-svn: 161461
initialize fields of the class that it used.
The result was nonsense code.
Before:
0000000000000000 <foo>:
0: 00441100 0x441100
4: 03e00008 jr ra
8: 00000000 nop
After:
0000000000000000 <foo>:
0: 00041000 sll v0,a0,0x0
4: 03e00008 jr ra
8: 00000000 nop
llvm-svn: 161377
This allows codegen passes to query properties like
InstrItins->SchedModel->IssueWidth. It also ensure's that
computeOperandLatency returns the X86 defaults for loads and "high
latency ops". This should have no significant impact on existing
schedulers because X86 defaults happen to be the same as global
defaults.
llvm-svn: 161370
were using a class defined for 32 bit instructions and
thus the instruction was for addiu instead of daddiu.
This was corrected by adding the instruction opcode as a
field in the base class to be filled in by the defs.
llvm-svn: 161359
These 2 relocations gain access to the
highest and the second highest 16 bits
of a 64 bit object.
R_MIPS_HIGHER %higher(A+S)
The %higher(x) function is [ (((long long) x + 0x80008000LL) >> 32) & 0xffff ].
R_MIPS_HIGHEST %highest(A+S)
The %highest(x) function is [ (((long long) x + 0x800080008000LL) >> 48) & 0xffff ].
llvm-svn: 161348
The MFTB instruction itself is being phased out, and its functionality
is provided by MFSPR. According to the ISA docs, using MFSPR works on all known
chips except for the 601 (which did not have a timebase register anyway)
and the POWER3.
Thanks to Adhemerval Zanella for pointing this out!
llvm-svn: 161346
On PPC64, this can be done with a simple TableGen pattern.
To enable this, I've added the (otherwise missing) readcyclecounter
SDNode definition to TargetSelectionDAG.td.
llvm-svn: 161302
Fast isel doesn't currently have support for translating builtin function
calls to target instructions. For embedded environments where the library
functions are not available, this is a matter of correctness and not
just optimization. Most of this patch is just arranging to make the
TargetLibraryInfo available in fast isel. <rdar://problem/12008746>
llvm-svn: 161232
This just provides a way to look up a LibFunc::Func enum value for a
function name. Alphabetize the enums and function names so we can use a
binary search.
llvm-svn: 161231
Craig Topper