This avoids unnecessary expansion of expressions and allows the SCEV
expander to work on expression DAGs, not just trees.
Fixes PR11090.
llvm-svn: 141870
would have never worked, since the element type of a vector type is never a
vector type. Also fix the conditional to be more direct in checking whether
EltTy is a vector type.
llvm-svn: 141713
IVs.
Indvars previously chose randomly between congruent IVs. Now it will
bias the decision toward IVs that SCEVExpander likes to create. This
was not done to fix any problem, it's just a welcome side effect of
factoring code.
llvm-svn: 141633
switch (n) {
case 27:
do_something(x);
...
}
the call do_something(x) will be replaced with do_something(27). In
gcc-as-one-big-file this results in the removal of about 500 lines of
bitcode (about 0.02%), so has about 1/10 of the effect of propagating
branch conditions.
llvm-svn: 141360
While I'm here, fix the related issue with strncmp, add some actual tests for strcmp and strncmp, and start using StringRef::compare for constant folding instead of using strcmp/strncmp so that the optimized IR isn't dependent on the host's implementation of strcmp.
llvm-svn: 141227
When updating the worklist for InstCombine, the Add/AddUsersToWorklist
functions may access the instruction(s) being added, for debug output for
example. If the instructions aren't yet added to the basic block, this
can result in a crash. Finish the instruction transformation before
adjusting the worklist instead.
rdar://10238555
llvm-svn: 141203
branch "br i1 %x, label %if_true, label %if_false" then it replaces
"%x" with "true" in places only reachable via the %if_true arm, and
with "false" in places only reachable via the %if_false arm. Except
that actually it doesn't: if value numbering shows that %y is equal
to %x then, yes, %y will be turned into true/false in this way, but
any occurrences of %x itself are not transformed. Fix this. What's
more, it's often the case that %x is an equality comparison such as
"%x = icmp eq %A, 0", in which case every occurrence of %A that is
only reachable via the %if_true arm can be replaced with 0. Implement
this and a few other variations on this theme. This reduces the number
of lines of LLVM IR in "GCC as one big file" by 0.2%. It has a bigger
impact on Ada code, typically reducing the number of lines of bitcode
by around 0.4% by removing repeated compiler generated checks. Passes
the LLVM nightly testsuite and the Ada ACATS testsuite.
llvm-svn: 141177
it's OK for the false/true destination to have multiple
predecessors as long as the extra ones are dominated by
the branch destination.
llvm-svn: 141176
This handles the case in which LSR rewrites an IV user that is a phi and
splits critical edges originating from a switch.
Fixes <rdar://problem/6453893> LSR is not splitting edges "nicely"
llvm-svn: 141059
catch or repeated filter clauses. Teach instcombine a bunch
of tricks for simplifying landingpad clauses. Currently the
code only recognizes the GNU C++ and Ada personality functions,
but that doesn't stop it doing a bunch of "generic" transforms
which are hopefully fine for any real-world personality function.
If these "generic" transforms turn out not to be generic, they
can always be conditioned on the personality function. Probably
someone should add the ObjC++ personality function. I didn't as
I don't know anything about it.
llvm-svn: 140852
Though I think it may be obsolete with the loop extract changes. And I couldn't
get the old version of LLVM to compile so that I could reduce this testcase.
llvm-svn: 140197
any given function. As pointed out by John McCall, this is needed to
have redundant eh.typeid.for tests be eliminated in the presence of
cleanups.
llvm-svn: 139360
duplicate tests are eliminated (for example if the two functions both have
a catch clause catching the same type, ensure the redundant one is removed).
Note that it would probably be safe to say that eh.typeid.for is 'const',
but since two calls to it with the same argument can give different results
(but only if the calls are in different functions), it seems more correct to
mark it only 'pure'; this doesn't get in the way of the optimization.
llvm-svn: 139236
init.trampoline and adjust.trampoline intrinsics, into two intrinsics
like in GCC. While having one combined intrinsic is tempting, it is
not natural because typically the trampoline initialization needs to
be done in one function, and the result of adjust trampoline is needed
in a different (nested) function. To get around this llvm-gcc hacks the
nested function lowering code to insert an additional parent variable
holding the adjust.trampoline result that can be accessed from the child
function. Dragonegg doesn't have the luxury of tweaking GCC code, so it
stored the result of adjust.trampoline in the memory GCC set aside for
the trampoline itself (this is always available in the child function),
and set up some new memory (using an alloca) to hold the trampoline.
Unfortunately this breaks Go which allocates trampoline memory on the
heap and wants to use it even after the parent has exited (!). Rather
than doing even more hacks to get Go working, it seemed best to just use
two intrinsics like in GCC. Patch mostly by Sanjoy Das.
llvm-svn: 139140
In theory this could be extended to other instructions, eg. division by zero, but it's likely that it will "miscompile" some code because people depend on div by zero not trapping. NULL pointer dereference usually leads to a crash so we should be on the safe side.
This shrinks the size of a Release clang by 16k on x86_64.
llvm-svn: 138618
making random bad assumptions about instructions which are not explicitly listed.
Includes fix for rdar://9956541, a version of "undef ^ undef should return
0 because it's easier than arguing with users".
llvm-svn: 137777
This commit includes a mention of the landingpad instruction, but it's not
changing the behavior around it. I think the current behavior is correct,
though. Bill, can you double-check that?
llvm-svn: 137691
of the instruction.
Note that this change affects the existing non-atomic load and store
instructions; the parser now accepts both forms, and the change is noted
in the release notes.
llvm-svn: 137527
the retains and releases all use the same SSA pointer value.
Also, don't let CFG hazards disrupt nested retain+release pair
optimizations.
llvm-svn: 137399
SCEV unrolling can unroll loops with arbitrary induction variables. It
is a prerequisite for -disable-iv-rewrite performance. It is also
easily handles loops of arbitrary structure including multiple exits
and is generally more robust.
This is under a temporary option to avoid affecting default
behavior for the next couple of weeks. It is needed so that I can
checkin unit tests for updateUnloop.
llvm-svn: 137384
These are not individual bug fixes. I had to rewrite a good chunk of
the unroller to make it sane. I think it was getting lucky on trivial
completely unrolled loops with no early exits. I included some fairly
simple unit tests for partial unrolling. I didn't do much stress
testing, so it may not be perfect, but should be usable now.
llvm-svn: 137190
recurrence, the initial values low bits can sometimes be ignored.
To take advantage of this, added FoldIVUser to IndVarSimplify to fold
an IV operand into a udiv/lshr if the operator doesn't affect the
result.
-indvars -disable-iv-rewrite now transforms
i = phi i4
i1 = i0 + 1
idx = i1 >> (2 or more)
i4 = i + 4
into
i = phi i4
idx = i0 >> ...
i4 = i + 4
llvm-svn: 137013
Don't replace a gep/bitcast with 'undef' because that will form a "free(undef)"
which in turn means "unreachable". What we wanted was a no-op. Instead, analyze
the whole tree and look for all the instructions we need to delete first, then
delete them second, not relying on the use_list to stay consistent.
llvm-svn: 136752
size but different element types, so that it filters out the cases
that CreateShuffleVectorCast doesn't handle. This fixes rdar://9786827.
llvm-svn: 135721
For -disable-iv-rewrite, perform LFTR without generating a new
"canonical" induction variable. Instead find the "best" existing
induction variable for use in the loop exit test and compute the final
value of that IV for use in the new loop exit test. In short,
convert to a simple eq/ne exit test as long as it's cheap to do so.
llvm-svn: 135420
patch brings numerous advantages to LLVM. One way to look at it
is through diffstat:
109 files changed, 3005 insertions(+), 5906 deletions(-)
Removing almost 3K lines of code is a good thing. Other advantages
include:
1. Value::getType() is a simple load that can be CSE'd, not a mutating
union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
uniques them. This means that the compiler doesn't merge them structurally
which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead
"const Type *" everywhere.
Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.
"LLVM 3.0" is the right time to do this.
There are still some cleanups pending after this, this patch is large enough
as-is.
llvm-svn: 134829
The promotion code lost any alignment information, when hoisting loads and
stores out of the loop. This lead to incorrect aligned memory accesses. We now
use the largest alignment we can prove to be correct.
llvm-svn: 134520
alloca that only holds a copy of a global and we're going to replace the users
of the alloca with that global, just nuke the lifetime intrinsics. Part of
PR10121.
llvm-svn: 133905
ops.
This is a rewrite of the IV simplification algorithm used by
-disable-iv-rewrite. To avoid perturbing the default mode, I
temporarily split the driver and created SimplifyIVUsersNoRewrite. The
idea is to avoid doing opcode/pattern matching inside
IndVarSimplify. SCEV already does it. We want to optimize with the
full generality of SCEV, but optimize def-use chains top down on-demand rather
than rewriting the entire expression bottom-up. This was easy to do
for operations that SCEV can prove are identity function. So we're now
eliminating bitmasks and zero extends this way.
A result of this rewrite is that indvars -disable-iv-rewrite no longer
requires IVUsers.
llvm-svn: 133502
In cases such as the attached test, where the case value for a switch
destination is used in a phi node that follows the destination, it
might be better to replace that value with the condition value of the
switch, so that more blocks can be folded away with
TryToSimplifyUncondBranchFromEmptyBlock because there are less
conflicts in the phi node.
llvm-svn: 133344
type's bitwidth matches the (allocated) size of the alloca. This severely
pessimizes vector scalar replacement when the only vector type being used is
something like <3 x float> on x86 or ARM whose allocated size matches a
<4 x float>.
I hope to fix some of the flawed assumptions about allocated size throughout
scalar replacement and reenable this in most cases.
llvm-svn: 133338
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
llvm-svn: 133337
might overflow. Re-typing the alloca to a larger type (e.g. double)
hoists a shift into the alloca, potentially exposing overflow in the
expression. rdar://problem/9265821
llvm-svn: 132926
pad, separating the exception and selector calls from the new lpad. Teaching
it not to do that, or to properly adjust the CFG afterwards, is out of
scope because it would require the other edges to the landing pad to be split
as well (effectively). Instead, just recover from the most likely cases
during inlining. The best long-term solution is to change the exception
representation and commit to either requiring or not requiring the more
complex edge-splitting logic; this is just a shorter-term hack.
llvm-svn: 132799
assuming that all offsets are legal vector accesses, and thus trying to access
the float member of { <2 x float>, float } as the 3rd element of the first
member.
llvm-svn: 132766
former was using the size of the entire alloca, whereas the latter was correctly using
the allocated size of the immediate type being converted (which may differ from the size
of the alloca). This fixes PR10082.
llvm-svn: 132759
then we don't want to set the destination in the indirect branch to the
destination. This is because the indirect branch needs its destinations to have
had their block addresses taken. This isn't so of the new critical edge that's
split during this process. If it turns out that the destination block has only
one predecessor, and that being a BB with an indirect branch, then it won't be
marked as 'used' and may be removed.
PR10072
llvm-svn: 132638
redundant with partially-aliasing loads.
When computing what portion of a clobbering load value is needed,
it doesn't consider phi-translation which may have occurred
between the clobbing load and the redundant load.
llvm-svn: 132631
which edge to split by pred/succ pair, which means that we can end up splitting
the wrong edge (by case value) in the switch statement entirely. Fixes PR10031!
llvm-svn: 132535
In the given testcase, the "Clobber" was pointing to a load, and GVN was incorrectly assuming that meant that the "Clobber" load overlapped the load being analyzed (when they are actually unrelated).
The included testcase tests both this commit and r132434.
Part two of rdar://9429882. (r132434 was mislabeled.)
llvm-svn: 132442
variable. Noticed by inspection.
Simulate memset in EvaluateFunction where the target of the memset and the
value we're setting are both the null value. Fixes PR10047!
llvm-svn: 132288
transformed by the inliner into a branch to the enclosing landing pad
(when inlined through an invoke). If not so optimized, it is lowered
DWARF EH preparation into a call to _Unwind_Resume (or _Unwind_SjLj_Resume
as appropriate). Its chief advantage is that it takes both the
exception value and the selector value as arguments, meaning that there
is zero effort in recovering these; however, the frontend is required
to pass these down, which is not actually particularly difficult.
Also document the behavior of landing pads a bit better, and make it
clearer that it's okay that personality functions don't always land at
landing pads. This is just a fact of life. Don't write optimizations that
rely on pushing things over an unwind edge.
llvm-svn: 132253
- the selector for the landing pad must provide all available information
about the handlers, filters, and cleanups within that landing pad
- calls to _Unwind_Resume must be converted to branches to the enclosing
lpad so as to avoid re-entering the unwinder when the lpad claimed it
was going to handle the exception in some way
This is quite specific to libUnwind-based unwinding. In an effort to not
interfere too badly with other unwinders, and with existing hacks in frontends,
this only triggers on _Unwind_Resume (not _Unwind_Resume_or_Rethrow) and does
nothing with selectors if it cannot find a selector call for either lpad.
llvm-svn: 132200
Use a proper worklist for use-def traversal without holding onto an
iterator. Now that we process all IV uses, we need complete logic for
resusing existing derived IV defs. See HoistStep.
llvm-svn: 132103
aligned.
Teach memcpyopt to not give up all hope when confonted with an underaligned
memcpy feeding an overaligned byval. If the *source* of the memcpy can be
determined to be adequeately aligned, or if it can be forced to be, we can
eliminate the memcpy.
This addresses PR9794. We now compile the example into:
define i32 @f(%struct.p* nocapture byval align 8 %q) nounwind ssp {
entry:
%call = call i32 @g(%struct.p* byval align 8 %q) nounwind
ret i32 %call
}
in both x86-64 and x86-32 mode. We still don't get a tailcall though,
because tailcalls apparently can't handle byval.
llvm-svn: 131884
result is non-zero. Implement an example optimization (PR9814), which allows us to
transform:
A / ((1 << B) >>u 2)
into:
A >>u (B-2)
which we compile into:
_divu3: ## @divu3
leal -2(%rsi), %ecx
shrl %cl, %edi
movl %edi, %eax
ret
instead of:
_divu3: ## @divu3
movb %sil, %cl
movl $1, %esi
shll %cl, %esi
shrl $2, %esi
movl %edi, %eax
xorl %edx, %edx
divl %esi, %eax
ret
llvm-svn: 131860
failing to form a memset, then having to delete it" but my approximation
isn't safe for self recurrent loops. Instead of doign a hack, just
do it the right way.
llvm-svn: 131858
I also changed -simplifycfg, -jump-threading and -codegenprepare to use this to produce slightly better code without any extra cleanup passes (AFAICT this was the only place in -simplifycfg where now-dead conditions of replaced terminators weren't being cleaned up). The only other user of this function is -sccp, but I didn't read that thoroughly enough to figure out whether it might be holding pointers to instructions that could be deleted by this.
llvm-svn: 131855
As an example, the change to InstCombineCalls catches a common case where a call to a bitcast of a function is rewritten.
Chris, does this approach look reasonable?
llvm-svn: 131516
often expressed as "x >= y ? x : y", there is a good chance we can extract
the existing "x >= y" from it and use that as a replacement for "max(x,y)==x".
llvm-svn: 131049
but according to my super-optimizer there are only two missed simplifications
of -instsimplify kind when compiling bzip2, and this is one of them. It amuses
me to have bzip2 be perfectly optimized as far as instsimplify goes!
llvm-svn: 130840
max(a,b) >= a -> true. According to my super-optimizer, these are
by far the most common simplifications (of the -instsimplify kind)
that occur in the testsuite and aren't caught by -std-compile-opts.
llvm-svn: 130780
This obviously helps a lot if the division would be turned into a libcall
(think i64 udiv on i386), but div is also one of the few remaining instructions
on modern CPUs that become more expensive when the bitwidth gets bigger.
This also helps register pressure on i386 when dividing chars, divb needs
two 8-bit parts of a 16 bit register as input where divl uses two registers.
int foo(unsigned char a) { return a/10; }
int bar(unsigned char a, unsigned char b) { return a/b; }
compiles into (x86_64)
_foo:
imull $205, %edi, %eax
shrl $11, %eax
ret
_bar:
movzbl %dil, %eax
divb %sil, %al
movzbl %al, %eax
ret
llvm-svn: 130615
a nice and tidy:
%x1 = load i32* %0, align 4
%1 = icmp eq i32 %x1, 1179403647
br i1 %1, label %if.then, label %if.end
instead of doing lots of loads and branches. May the FreeBSD bootloader
long fit in its allocated space.
llvm-svn: 130416
wider load would allow elimination of subsequent loads, and when the wider
load is still a native integer type. This eliminates a ton of loads on
various benchmarks involving struct fields, though it is somewhat hobbled
by clang not being very aggressive about field alignment.
This is yet another step along the way towards resolving PR6627.
llvm-svn: 130390
Modified LinearFunctionTestReplace to push the condition on the dead
list instead of eagerly deleting it. This can cause unnecessary
IV rewrites, which should have no effect on codegen and will not be an
issue once we stop generating canonical IVs.
llvm-svn: 130340
1. Only run the early (in the module pass pipe) instcombine/simplifycfg
if the "unit at a time" passes they are cleaning up after runs.
2. Move the "clean up after the unroller" pass to the very end of the
function-level pass pipeline. Loop unroll uses instsimplify now,
so it doesn't create a ton of trash. Moving instcombine later allows
it to clean up after opportunities are exposed by GVN, DSE, etc.
3. Introduce some phase ordering tests for things that are specifically
intended to be simplified by the full optimizer as a whole.
This resolves PR2338, and is progress towards PR6627, which will be
generating code that looks similar to test2.
llvm-svn: 130241
when X has multiple uses. This is useful for exposing secondary optimizations,
but the X86 backend isn't ready for this when X has a single use. For example,
this can disable load folding.
This is inching towards resolving PR6627.
llvm-svn: 130238
return it as a clobber. This allows GVN to do smart things.
Enhance GVN to be smart about the case when a small load is clobbered
by a larger overlapping load. In this case, forward the value. This
allows us to compile stuff like this:
int test(void *P) {
int tmp = *(unsigned int*)P;
return tmp+*((unsigned char*)P+1);
}
into:
_test: ## @test
movl (%rdi), %ecx
movzbl %ch, %eax
addl %ecx, %eax
ret
which has one load. We already handled the case where the smaller
load was from a must-aliased base pointer.
llvm-svn: 130180
the same allocation size but different primitive sizes(e.g., <3xi32> and
<4xi32>). When ScalarRepl promotes them, it can't use a bit cast but
should use a shuffle vector instead.
llvm-svn: 129472
reassociation opportunities are exposed. This fixes a bug where
the nested reassociation expects to be the IR to be consistent,
but it isn't, because the outer reassociation has disconnected
some of the operands. rdar://9167457
llvm-svn: 129324
is equivalent to any other relevant value; it isn't true in general.
If it is equivalent, the LoopPromoter will tell the AST the equivalence.
Also, delete the PreheaderLoad if it is unused.
Chris, since you were the last one to make major changes here, can you check
that this is sane?
llvm-svn: 129049
space info. We crash with an assert in this case. This change checks that the
address space of the bitcasted pointer is the same as the gep ptr.
llvm-svn: 128884
after the given instruction; make sure to handle that case correctly.
(It's difficult to trigger; the included testcase involves a dead
block, but I don't think that's a requirement.)
While I'm here, get rid of the unnecessary warning about
SimplifyInstructionsInBlock, since it should work correctly as far as I know.
llvm-svn: 128782
that one of the numbers is signed while the other is unsigned. This could lead
to a wrong result when the signed was promoted to an unsigned int.
* Add the data layout line to the testcase so that it will test the appropriate
thing.
Patch by David Terei!
llvm-svn: 128577
removes one use of X which helps it pass the many hasOneUse() checks.
In my analysis, this turns up very often where X = A >>exact B and that can't be
simplified unless X has one use (except by increasing the lifetime of A which is
generally a performance loss).
llvm-svn: 128373
For example, on 32-bit architecture, don't promote all uses of the IV
to 64-bits just because one use is a 64-bit cast.
Alternate implementation of the patch by Arnaud de Grandmaison.
llvm-svn: 127884
chose is having a non-memcpy/memset use and being larger than any native integer
type. Originally I chose having an access of a size smaller than the total size
of the alloca, but this caused some minor issues on the spirit benchmark where
SRoA runs again after some inlining.
This fixes <rdar://problem/8613163>.
llvm-svn: 127718
Optimize trivial branches in CodeGenPrepare, which often get created from the
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
llvm-svn: 127498
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
llvm-svn: 127459
after it has finished all of its reassociations, because its
habit of unlinking operands and holding them in a datastructure
while working means that it's not easy to determine when an
instruction is really dead until after all its regular work is
done. rdar://9096268.
llvm-svn: 127424
This happens a lot in clang-compiled C++ code because it adds overflow checks to operator new[]:
unsigned *foo(unsigned n) { return new unsigned[n]; }
We can optimize away the overflow check on 64 bit targets because (uint64_t)n*4 cannot overflow.
llvm-svn: 127418
gave up when I realized I couldn't come up with a good name for what the
refactored function would be, to describe what it does.
This is PR9343 test12, which is test3 with arguments reordered. Whoops!
llvm-svn: 127318
a union of a float, <2 x float>, and <4 x float>. This mostly comes up with the
use of vector intrinsics, especially in NEON when programmers know the layout of
the register file. This enables codegen to eliminate a lot of the subregister
traffic it would otherwise generate.
This commit only enables this for a small number of floating-point cases, but a
lot more integer cases. I assume this is okay for all ports, but I did not do
extensive testing of the quality of code involving i512 vectors and the like. If
there is a use case where this generates worse code than before, let me know and
we can scale it back.
This fixes <rdar://problem/9036264>.
llvm-svn: 127317
reachable uses, but there still might be uses in dead blocks. Use the
standard solution of replacing all the uses with undef. This is
a rare case because it's very sensitive to phase ordering in SimplifyCFG.
llvm-svn: 127299
the value splatted into every element. Extend this to getTrue and getFalse which
by providing new overloads that take Types that are either i1 or <N x i1>. Use
it in InstCombine to add vector support to some code, fixing PR8469!
llvm-svn: 127116
possible. This goes into instcombine and instsimplify because instsimplify
doesn't need to check hasOneUse since it returns (almost exclusively) constants.
This fixes PR9343 #4#5 and #8!
llvm-svn: 127064
"icmp pred %X, CI" and a number of examples where "%X = binop %Y, CI2".
Some of these cases (div and rem) used to make it through opt -O2, but the
others are probably now making code elsewhere redundant (probably instcombine).
llvm-svn: 126988
intersection of the LHS and RHS ConstantRanges and return "false" when
the range is empty.
This simplifies some code and catches some extra cases.
llvm-svn: 126744
Yes, there are other types than i8* and GEPs on them can produce an add+multiply.
We don't consider that cheap enough to be speculatively executed.
llvm-svn: 126481
function prototype into a call to a varargs prototype. We do
allow the xform if we have a definition, but otherwise we don't
want to risk that we're changing the abi in a subtle way. On
X86-64, for example, varargs require passing stuff in %al.
llvm-svn: 126363
We usually catch this kind of optimization through InstSimplify's distributive
magic, but or doesn't distribute over xor in general.
"A | ~(A | B) -> A | ~B" hits 24 times on gcc.c.
llvm-svn: 126081
constant, including globals. This makes us generate much more "pretty" pattern
globals as well because it doesn't break it down to an array of bytes all the
time.
This enables us to handle stores of relocatable globals. This kicks in about
48 times in 254.gap, giving us stuff like this:
@.memset_pattern40 = internal constant [2 x %struct.TypHeader* (%struct.TypHeader*, %struct.TypHeader*)*] [%struct.TypHeader* (%struct.TypHeader*, %struct
.TypHeader*)* @IsFalse, %struct.TypHeader* (%struct.TypHeader*, %struct.TypHeader*)* @IsFalse], align 16
...
call void @memset_pattern16(i8* %scevgep5859, i8* bitcast ([2 x %struct.TypHeader* (%struct.TypHeader*, %struct.TypHeader*)*]* @.memset_pattern40 to i8*
), i64 %tmp75) nounwind
llvm-svn: 126044
unsplatable values into memset_pattern16 when it is available
(recent darwins). This transforms lots of strided loop stores
of ints for example, like 5 in vpr:
Formed memset: call void @memset_pattern16(i8* %4, i8* getelementptr inbounds ([16 x i8]* @.memset_pattern9, i32 0, i32 0), i64 %tmp25)
from store to: {%3,+,4}<%11> at: store i32 3, i32* %scevgep, align 4, !tbaa !4
llvm-svn: 126040
taken (and used!). This prevents merging the blocks (invalidating
the block addresses) in a case like this:
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
void foo() {
printf("%p\n", _THIS_IP_);
printf("%p\n", _THIS_IP_);
printf("%p\n", _THIS_IP_);
}
which fixes PR4151.
llvm-svn: 125829
plus some variations of this. According to my auto-simplifier this occurs a lot
but usually in combination with max/min idioms. Because max/min aren't handled
yet this unfortunately doesn't have much effect in the testsuite.
llvm-svn: 125462
It caused a crash in MultiSource/Benchmarks/Bullet.
Opt hit an assertion with "opt -std-compile-opts" because
Constant::getAllOnesValue doesn't know how to handle floats.
This patch added a test to reproduce the problem and a check that the
destination vector is of integer type.
Thank you Benjamin!
llvm-svn: 125459
gep to explicit addressing, we know that none of the intermediate
computation overflows.
This could use review: it seems that the shifts certainly wouldn't
overflow, but could the intermediate adds overflow if there is a
negative index?
Previously the testcase would instcombine to:
define i1 @test(i64 %i) {
%p1.idx.mask = and i64 %i, 4611686018427387903
%cmp = icmp eq i64 %p1.idx.mask, 1000
ret i1 %cmp
}
now we get:
define i1 @test(i64 %i) {
%cmp = icmp eq i64 %i, 1000
ret i1 %cmp
}
llvm-svn: 125271
exact/nsw/nuw shifts and have instcombine infer them when it can prove
that the relevant properties are true for a given shift without them.
Also, a variety of refactoring to use the new patternmatch logic thrown
in for good luck. I believe that this takes care of a bunch of related
code quality issues attached to PR8862.
llvm-svn: 125267
optimizations to be much more aggressive in the face of
exact/nsw/nuw div and shifts. For example, these (which
are the same except the first is 'exact' sdiv:
define i1 @sdiv_icmp4_exact(i64 %X) nounwind {
%A = sdiv exact i64 %X, -5 ; X/-5 == 0 --> x == 0
%B = icmp eq i64 %A, 0
ret i1 %B
}
define i1 @sdiv_icmp4(i64 %X) nounwind {
%A = sdiv i64 %X, -5 ; X/-5 == 0 --> x == 0
%B = icmp eq i64 %A, 0
ret i1 %B
}
compile down to:
define i1 @sdiv_icmp4_exact(i64 %X) nounwind {
%1 = icmp eq i64 %X, 0
ret i1 %1
}
define i1 @sdiv_icmp4(i64 %X) nounwind {
%X.off = add i64 %X, 4
%1 = icmp ult i64 %X.off, 9
ret i1 %1
}
This happens when you do something like:
(ptr1-ptr2) == 42
where the pointers are pointers to non-unit types.
llvm-svn: 125266
could end up removing a different function than we intended because it was
functionally equivalent, then end up with a comparison of a function against
itself in the next round of comparisons (the one in the function set and the
one on the deferred list). To fix this, I introduce a choice in the form of
comparison for ComparableFunctions, either normal or "pointer only" used to
find exact Function*'s in lookups.
Also add some debugging statements.
llvm-svn: 125180
auto-simplifier). This has a big impact on Ada code, but not much else.
Unfortunately the impact is mostly negative! This is due to PR9004 (aka
SCCP failing to resolve conditional branch conditions in the destination
blocks of the branch), in which simple correlated expressions are not
resolved but complicated ones are, so simplifying has a bad effect!
llvm-svn: 124788
overflow (nsw flag), which was disabled because it breaks 254.gap. I have
informed the GAP authors of the mistake in their code, and arranged for the
testsuite to use -fwrapv when compiling this benchmark.
llvm-svn: 124746
This makes the job of the later optzn passes easier, allowing the vast amount of
icmp transforms to chew on it.
We transform 840 switches in gcc.c, leading to a 16k byte shrink of the resulting
binary on i386-linux.
The testcase from README.txt now compiles into
decl %edi
cmpl $3, %edi
sbbl %eax, %eax
andl $1, %eax
ret
llvm-svn: 124724
to do this and more, but would only do it if X/Y had only one use. Spotted as the
most common missed simplification in SPEC by my auto-simplifier, now that it knows
about nuw/nsw/exact flags. This removes a bunch of multiplications from 447.dealII
and 483.xalancbmk. It also removes a lot from tramp3d-v4, which results in much
more inlining.
llvm-svn: 124560
benchmarks, and that it can be simplified to X/Y. (In general you can only
simplify (Z*Y)/Y to Z if the multiplication did not overflow; if Z has the
form "X/Y" then this is the case). This patch implements that transform and
moves some Div logic out of instcombine and into InstructionSimplify.
Unfortunately instcombine gets in the way somewhat, since it likes to change
(X/Y)*Y into X-(X rem Y), so I had to teach instcombine about this too.
Finally, thanks to the NSW/NUW flags, sometimes we know directly that "Z*Y"
does not overflow, because the flag says so, so I added that logic too. This
eliminates a bunch of divisions and subtractions in 447.dealII, and has good
effects on some other benchmarks too. It seems to have quite an effect on
tramp3d-v4 but it's hard to say if it's good or bad because inlining decisions
changed, resulting in massive changes all over.
llvm-svn: 124487
operand being factorized (and erased) could occur several times in Ops,
resulting in freed memory being used when the next occurrence in Ops was
analyzed.
llvm-svn: 124287
optimized code are:
(non-negative number)+(power-of-two) != 0 -> true
and
(x | 1) != 0 -> true
Instcombine knows about the second one of course, but only does it if X|1
has only one use. These fire thousands of times in the testsuite.
llvm-svn: 124183
occurs because instcombine sinks loads and inserts phis. This kicks in
on such apps as 175.vpr, eon, 403.gcc, xalancbmk and a bunch of times in
spec2006 in some app that uses std::deque.
This resolves the last of rdar://7339113.
llvm-svn: 124090
common cases. This triggers a surprising number of times in SPEC2K6
because min/max idioms end up doing this. For example, code from the
STL ends up looking like this to SRoA:
%202 = load i64* %__old_size, align 8, !tbaa !3
%203 = load i64* %__old_size, align 8, !tbaa !3
%204 = load i64* %__n, align 8, !tbaa !3
%205 = icmp ult i64 %203, %204
%storemerge.i = select i1 %205, i64* %__n, i64* %__old_size
%206 = load i64* %storemerge.i, align 8, !tbaa !3
We can now promote both the __n and the __old_size allocas.
This addresses another chunk of rdar://7339113, poor codegen on
stringswitch.
llvm-svn: 124088
that have PHI or select uses of their element pointers. This can often happen
when instcombine sinks two loads into a successor, inserting a phi or select.
With this patch, we can scalarize the alloca, but the pinned elements are not
yet promoted. This is still a win for large aggregates where only one element
is used. This fixes rdar://8904039 and part of rdar://7339113 (poor codegen
on stringswitch).
llvm-svn: 124070
a select. A vector select is pairwise on each element so we'd need a new
condition with the right number of elements to select on. Fixes PR8994.
llvm-svn: 123963
While here, I'd like to complain about how vector is not an aggregate type
according to llvm::Type::isAggregateType(), but they're listed under aggregate
types in the LangRef and zero vectors are stored as ConstantAggregateZero.
llvm-svn: 123956
auto-simplier the transform most missed by early-cse is (zext X) != 0 -> X != 0.
This patch adds this transform and some related logic to InstructionSimplify
and removes some of the logic from instcombine (unfortunately not all because
there are several situations in which instcombine can improve things by making
new instructions, whereas instsimplify is not allowed to do this). At -O2 this
often results in more than 15% more simplifications by early-cse, and results in
hundreds of lines of bitcode being eliminated from the testsuite. I did see some
small negative effects in the testsuite, for example a few additional instructions
in three programs. One program, 483.xalancbmk, got an additional 35 instructions,
which seems to be due to a function getting an additional instruction and then
being inlined all over the place.
llvm-svn: 123911
These were not recommended by my auto-simplifier since they don't fire often enough.
However they do fire from time to time, for example they remove one subtraction from
the final bitcode for 483.xalancbmk.
llvm-svn: 123755
simplification in fully optimized code. It occurs sporadically in the testsuite, and
many times in 403.gcc: the final bitcode has 131 fewer subtractions after this change.
The reason that the multiplies are not eliminated is the same reason that instcombine
did not catch this: they are used by other instructions (instcombine catches this with
a more general transform which in general is only profitable if the operands have only
one use).
llvm-svn: 123754
This fixes the original testcase in PR8927. It also causes a clang
binary built with a patched clang to increase in size by 0.21%.
We can probably get some of the size back by writing a pass that
detects that a global never has its pointer compared and adds
unnamed_addr to it (maybe extend global opt). It is also possible that
there are some other cases clang could add unnamed_addr to.
I will investigate extending globalopt next.
llvm-svn: 123584
then don't try to decimate it into its individual pieces. This will just make a mess of the
IR and is pointless if none of the elements are individually accessed. This was generating
really terrible code for std::bitset (PR8980) because it happens to be lowered by clang
as an {[8 x i8]} structure instead of {i64}.
The testcase now is optimized to:
define i64 @test2(i64 %X) {
br label %L2
L2: ; preds = %0
ret i64 %X
}
before we generated:
define i64 @test2(i64 %X) {
%sroa.store.elt = lshr i64 %X, 56
%1 = trunc i64 %sroa.store.elt to i8
%sroa.store.elt8 = lshr i64 %X, 48
%2 = trunc i64 %sroa.store.elt8 to i8
%sroa.store.elt9 = lshr i64 %X, 40
%3 = trunc i64 %sroa.store.elt9 to i8
%sroa.store.elt10 = lshr i64 %X, 32
%4 = trunc i64 %sroa.store.elt10 to i8
%sroa.store.elt11 = lshr i64 %X, 24
%5 = trunc i64 %sroa.store.elt11 to i8
%sroa.store.elt12 = lshr i64 %X, 16
%6 = trunc i64 %sroa.store.elt12 to i8
%sroa.store.elt13 = lshr i64 %X, 8
%7 = trunc i64 %sroa.store.elt13 to i8
%8 = trunc i64 %X to i8
br label %L2
L2: ; preds = %0
%9 = zext i8 %1 to i64
%10 = shl i64 %9, 56
%11 = zext i8 %2 to i64
%12 = shl i64 %11, 48
%13 = or i64 %12, %10
%14 = zext i8 %3 to i64
%15 = shl i64 %14, 40
%16 = or i64 %15, %13
%17 = zext i8 %4 to i64
%18 = shl i64 %17, 32
%19 = or i64 %18, %16
%20 = zext i8 %5 to i64
%21 = shl i64 %20, 24
%22 = or i64 %21, %19
%23 = zext i8 %6 to i64
%24 = shl i64 %23, 16
%25 = or i64 %24, %22
%26 = zext i8 %7 to i64
%27 = shl i64 %26, 8
%28 = or i64 %27, %25
%29 = zext i8 %8 to i64
%30 = or i64 %29, %28
ret i64 %30
}
In this case, instcombine was able to eliminate the nonsense, but in PR8980 enough
PHIs are in play that instcombine backs off. It's better to not generate this stuff
in the first place.
llvm-svn: 123571
multiple uses. In some cases, all the uses are the same operation,
so instcombine can go ahead and promote the phi. In the testcase
this pushes an add out of the loop.
llvm-svn: 123568
The basic issue is that isel (very reasonably!) expects conditional branches
to be folded, so CGP leaving around a bunch dead computation feeding
conditional branches isn't such a good idea. Just fold branches on constants
into unconditional branches.
llvm-svn: 123526
have objectsize folding recursively simplify away their result when it
folds. It is important to catch this here, because otherwise we won't
eliminate the cross-block values at isel and other times.
llvm-svn: 123524
simplification present in fully optimized code (I think instcombine fails to
transform some of these when "X-Y" has more than one use). Fires here and
there all over the test-suite, for example it eliminates 8 subtractions in
the final IR for 445.gobmk, 2 subs in 447.dealII, 2 in paq8p etc.
llvm-svn: 123442
threading of shifts over selects and phis while there. This fires here and
there in the testsuite, to not much effect. For example when compiling spirit
it fires 5 times, during early-cse, resulting in 6 more cse simplifications,
and 3 more terminators being folded by jump threading, but the final bitcode
doesn't change in any interesting way: other optimizations would have caught
the opportunity anyway, only later.
llvm-svn: 123441
While there, I noticed that the transform "undef >>a X -> undef" was wrong.
For example if X is 2 then the top two bits must be equal, so the result can
not be anything. I fixed this in the constant folder as well. Also, I made
the transform for "X << undef" stronger: it now folds to undef always, even
though X might be zero. This is in accordance with the LangRef, but I must
admit that it is fairly aggressive. Also, I added "i32 X << 32 -> undef"
following the LangRef and the constant folder, likewise fairly aggressive.
llvm-svn: 123417
This is a minor extension of SROA to handle a special case that is
important for some ARM NEON operations. Some of the NEON intrinsics
return multiple values, which are handled as struct types containing
multiple elements of the same vector type. The corresponding return
types declared in the arm_neon.h header have equivalent arrays. We
need SROA to recognize that it can split up those arrays and structs
into separate vectors, even though they are not always accessed with
the same type. SROA already handles loads and stores of an entire
alloca by using insertvalue/extractvalue to access the individual
pieces, and that code works the same regardless of whether the type
is a struct or an array. So, all that needs to be done is to check
for compatible arrays and homogeneous structs.
llvm-svn: 123381
SROA only split up structs and arrays one level at a time, so padding can
only cause trouble if it is located in between the struct or array elements.
llvm-svn: 123380
is "X != 0 -> X" when X is a boolean. This occurs a lot because of the way
llvm-gcc converts gcc's conditional expressions. Add this, and a few other
similar transforms for completeness.
llvm-svn: 123372
point values to their integer representation through the SSE intrinsic
calls. This is the last part of a README.txt entry for which I have real
world examples.
llvm-svn: 123206
Andrew Trick