Summary:
I added a few ARM64 memset codegen tests in r341406 and r341493, and annotated
where the generated code was bad. This patch fixes the majority of the issues by
requesting that a 2xi64 vector be used for memset of 32 bytes and above.
The patch leaves the former request for f128 unchanged, despite f128
materialization being suboptimal: doing otherwise runs into other asserts in
isel and makes this patch too broad.
This patch hides the issue that was present in bzero_40_stack and bzero_72_stack
because the code now generates in a better order which doesn't have the store
offset issue. I'm not aware of that issue appearing elsewhere at the moment.
<rdar://problem/44157755>
Reviewers: t.p.northover, MatzeB, javed.absar
Subscribers: eraman, kristof.beyls, chrib, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51706
llvm-svn: 341558
This basically reverts a change made in r336217, but improves the text of the error message for not allowing IP-relative addressing in 32-bit mode.
Fixes PR38826.
Patch by Iain Sandoe.
llvm-svn: 341512
This replaces r337723. The global list in the module can be huge with LTO,
plus the module can change between different invocations of the pass, so
there is no easy way to deterministically cache the ordering (especially
in the presence of multiple threads).
llvm-svn: 341478
This removes the FrameAccess struct that was added to the interface
in D51537, since the PseudoValue from the MachineMemoryOperand
can be safely casted to a FixedStackPseudoSourceValue.
Reviewers: MatzeB, thegameg, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51617
llvm-svn: 341454
Emit a waterfall loop in the general case for a potentially-divergent Rsrc
operand. When practical, avoid this by using Addr64 instructions.
Differential Revision: https://reviews.llvm.org/D50982
llvm-svn: 341413
On Windows, if shouldAssumeDSOLocal returns false, it's either a
dllimport reference, or a reference that we should treat as non-local
and create a stub for.
Clean up AArch64Subtarget::ClassifyGlobalReference a little while
touching the flag handling relating to dllimport.
Differential Revision: https://reviews.llvm.org/D51590
llvm-svn: 341402
The runtime pseudo relocations can't handle the AArch64 format PC
relative addressing in adrp+add/ldr pairs. By using stubs, the potentially
dllimported addresses can be touched up by the runtime pseudo relocation
framework.
Differential Revision: https://reviews.llvm.org/D51452
llvm-svn: 341401
Use MachineOperand::ChangeToImmediate rather than reassigning
MachineOperands to new values created from MachineOperand::CreateImm,
so that their parent pointers are preserved.
This fixes "Instruction has operand with wrong parent set" errors
reported by the MachineVerifier.
llvm-svn: 341389
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
implementing the proposed mitigation technique described in the original
design document.
The idea is to check after calls that the return address used to arrive
at that location is in fact the correct address. In the event of
a mis-predicted return which reaches a *valid* return but not the
*correct* return, this will detect the mismatch much like it would
a mispredicted conditional branch.
This is the last published attack vector that I am aware of in the
Spectre v1 space which is not mitigated by SLH+retpolines. However,
don't read *too* much into that: this is an area of ongoing research
where we expect more issues to be discovered in the future, and it also
makes no attempt to mitigate Spectre v4. Still, this is an important
completeness bar for SLH.
The change here is of course delightfully simple. It was predicated on
cutting support for post-instruction symbols into LLVM which was not at
all simple. Many thanks to Hal Finkel, Reid Kleckner, and Justin Bogner
who helped me figure out how to do a bunch of the complex changes
involved there.
Differential Revision: https://reviews.llvm.org/D50837
llvm-svn: 341358
retpolines.
This implements the core design of tracing the intended target into the
target, checking it, and using that to update the predicate state. It
takes advantage of a few interesting aspects of SLH to make it a bit
easier to implement:
- We already split critical edges with conditional branches, so we can
assume those are gone.
- We already unfolded any memory access in the indirect branch
instruction itself.
I've left hard errors in place to catch if any of these somewhat subtle
invariants get violated.
There is some code that I can factor out and share with D50837 when it
lands, but I didn't want to couple landing the two patches, so I'll do
that in a follow-up cleanup commit if alright.
Factoring out the code to handle different scenarios of materializing an
address remains frustratingly hard. In a bunch of cases you want to fold
one of the cases into an immediate operand of some other instruction,
and you also have both symbols and basic blocks being used which require
different methods on the MI builder (and different operand kinds).
Still, I'll take a stab at sharing at least some of this code in
a follow-up if I can figure out how.
Differential Revision: https://reviews.llvm.org/D51083
llvm-svn: 341356
This patch modifies hasStandardEncoding() / inMicroMipsMode() /
inMips16Mode() methods of the MipsSubtarget class so only one can be
true at any one time. That prevents the selection of microMIPS and MIPS
instructions and patterns that are defined in TableGen files at the same
time. A few new patterns and instruction definitions hae been added to
keep test cases passed.
Differential revision: https://reviews.llvm.org/D51483
llvm-svn: 341338
A ReadAdvance was incorrectly added to the SchedReadWrite list associated with
the following SSE instructions:
sqrtss
sqrtsd
rsqrtss
rcpss
As a consequence, a wrong operand latency was computed for the register operand
used as the base address of the folded load operand.
This patch removes the wrong ReadAdvance, and updates the llvm-mca test cases.
There is still a problem with correctly modeling partial register writes on XMM
registers This other problem is currently tracked here:
https://bugs.llvm.org/show_bug.cgi?id=38813
Differential Revision: https://reviews.llvm.org/D51542
llvm-svn: 341326
Also adjust some of dsymutil's headers to put the header guards at the top,
otherwise the compiler will not recognize them as header guards.
llvm-svn: 341323
When initial support for dllimport was added for aarch64 in
SVN r316555, ClassifyGlobalReference didn't set the MO_DLLIMPORT
flag - that was only completed in SVN r323810. Reuse the return
value from ClassifyGlobalReference for this purpose as well.
llvm-svn: 341310
For instructions that spill/fill to and from multiple frame-indices
in a single instruction, hasStoreToStackSlot and hasLoadFromStackSlot
should return an array of accesses, rather than just the first encounter
of such an access.
This better describes FI accesses for AArch64 (paired) LDP/STP
instructions.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D51537
llvm-svn: 341301
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch by jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D51506
llvm-svn: 341293
The 'rol Rd' instruction is equivalent to 'adc Rd'.
This caused compile warnings from tablegen because of conflicting bits
shared between each instruction.
llvm-svn: 341275
These intrinsics use the same implementation as PTEST intrinsics, but use vXi1 vectors.
New clang builtins will be accompanying them shortly.
llvm-svn: 341259
This patch recognizes shuffles that shift elements and fill with zeros. I've copied and modified the shift matching code we use for normal vector registers to do this. I'm not sure if there's a good way to share more of this code without making the existing function more complex than it already is.
This will be used to enable kshift intrinsics in clang.
Differential Revision: https://reviews.llvm.org/D51401
llvm-svn: 341227
The presence of a ReadAdvance for input operand #0 is problematic
because it changes the input latency of the register used as the base address
for the folded load.
A broadcast cannot start executing if the load address hasn't been computed yet.
In the llvm-mca example, the VBROADCASTSS is dependent on the address generated
by the LEAQ. That means, it cannot start until LEAQ reaches the write-back
stage. If we apply ReadAdvance, then we wrongly assume that the load can start 3
cycles in advance.
Differential Revision: https://reviews.llvm.org/D51534
llvm-svn: 341222
The `mtc1` and `mfc1` definitions in the MipsInstrFPU.td have MMRel,
but do not have StdMMR6Rel tags. When these instructions are emitted
for microMIPS R6 targets, `Mips::MipsR62MicroMipsR6` nor
`Mips::Std2MicroMipsR6` cannot find correct op-codes and as a result the
backend uses mips32 variant of the instructions encoding.
The patch fixes this problem by adding the StdMMR6Rel tag and check
instructions encoding in the test case.
Differential revision: https://reviews.llvm.org/D51482
llvm-svn: 341221
The intention is to enable the extract_vector_elt load combine,
and doing this for other operations interferes with more
useful optimizations on vectors.
Handle any type of load since in principle we should do the
same combine for the various load intrinsics.
llvm-svn: 341219
This patch fixes the number of micro opcodes, and processor resource cycles for
the following AVX instructions:
vinsertf128rr/rm
vperm2f128rr/rm
vbroadcastf128
Tests have been regenerated using the usual scripts in the llvm/utils directory.
Differential Revision: https://reviews.llvm.org/D51492
llvm-svn: 341185
These stubs should never be emitted for internal symbols, and
nothing in AsmPrinter ever actually use this value when producing
the stubs for COFF anyway.
llvm-svn: 341177
The runtime pseudo relocations can't handle the ARM format embedded
addresses in movw/movt pairs. By using stubs, the potentially
dllimported addresses can be touched up by the runtime pseudo relocation
framework.
Differential Revision: https://reviews.llvm.org/D51450
llvm-svn: 341176
It has essentially the same benefit it has on 64-bit ARM: it
substantially reduces the number of constants used by large GEP
operations. Seems to be generally helpful across a few different
codebases I've tried.
Differential Revision: https://reviews.llvm.org/D51462
llvm-svn: 341136
Summary:
RISCVAsmParser needs to handle the case the error message is of specific type, other than the generic Match_InvalidOperand, and the corresponding
operand is missing.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer Fuzzer for the RISC-V assembly language.
Reviewers: asb
Reviewed By: asb
Subscribers: llvm-commits, jocewei, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX
Differential Revision: https://reviews.llvm.org/D50790
llvm-svn: 341104
This assert tried to check that AND constants are only on the RHS. But its possible for both operands to be constants if one is opaque which will prevent the AND from being constant folded.
Fixes PR38771
llvm-svn: 341102
Summary:
Now uses the StackBased bit from the tablegen defs to identify
stack instructions (and ignore register based or non-wasm instructions).
Also changed how we store operands, since we now have up to 16 of them
per instruction. To not cause static data bloat, these are compressed
into a tiny table.
+ a few other cleanups.
Tested:
- MCTest
- llvm-lit -v `find test -name WebAssembly`
Reviewers: dschuff, jgravelle-google, sunfish, tlively
Subscribers: sbc100, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D51320
llvm-svn: 341081
..Move all target-dependent checks into new isCopyInstrImpl method.
This change allows us to treat MoveReg-type instructions and generic
COPY instruction in the same way
Differential Revision: https://reviews.llvm.org/D49913
llvm-svn: 341072
Summary:
This is patch 1 of the new DivergenceAnalysis (https://reviews.llvm.org/D50433).
The purpose of this patch is to free up the name DivergenceAnalysis for the new generic
implementation. The generic implementation class will be shared by specialized
divergence analysis classes.
Patch by: Simon Moll
Reviewed By: nhaehnle
Subscribers: jvesely, jholewinski, arsenm, nhaehnle, mgorny, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50434
Change-Id: Ie8146b11be2c50d5312f30e11c7a3036a15b48cb
llvm-svn: 341071
Summary:
In the case of (and reg, constant) or (or reg, constant), it can be
beneficial to use a ANDNrr/ORNrr instruction instead of ANDrr/ORrr,
if the complement of the constant can be encoded using a single SETHI
instruction instead of a SETHI/ORri pair.
If the constant has more than one use, it is probably better to keep it
in its original form.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50964
llvm-svn: 341069
Summary:
This is a continuation of https://reviews.llvm.org/D49727
Below the original text, current changes in the comments:
Currently, in line with GCC, when specifying reserved registers like sp or pc on an inline asm() clobber list, we don't always preserve the original value across the statement. And in general, overwriting reserved registers can have surprising results.
For example:
extern int bar(int[]);
int foo(int i) {
int a[i]; // VLA
asm volatile(
"mov r7, #1"
:
:
: "r7"
);
return 1 + bar(a);
}
Compiled for thumb, this gives:
$ clang --target=arm-arm-none-eabi -march=armv7a -c test.c -o - -S -O1 -mthumb
...
foo:
.fnstart
@ %bb.0: @ %entry
.save {r4, r5, r6, r7, lr}
push {r4, r5, r6, r7, lr}
.setfp r7, sp, #12
add r7, sp, #12
.pad #4
sub sp, #4
movs r1, #7
add.w r0, r1, r0, lsl #2
bic r0, r0, #7
sub.w r0, sp, r0
mov sp, r0
@APP
mov.w r7, #1
@NO_APP
bl bar
adds r0, #1
sub.w r4, r7, #12
mov sp, r4
pop {r4, r5, r6, r7, pc}
...
r7 is used as the frame pointer for thumb targets, and this function needs to restore the SP from the FP because of the variable-length stack allocation a. r7 is clobbered by the inline assembly (and r7 is included in the clobber list), but LLVM does not preserve the value of the frame pointer across the assembly block.
This type of behavior is similar to GCC's and has been discussed on the bugtracker: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11807 . No consensus seemed to have been reached on the way forward. Clang behavior has briefly been discussed on the CFE mailing (starting here: http://lists.llvm.org/pipermail/cfe-dev/2018-July/058392.html). I've opted for following Eli Friedman's advice to print warnings when there are reserved registers on the clobber list so as not to diverge from GCC behavior for now.
The patch uses MachineRegisterInfo's target-specific knowledge of reserved registers, just before we convert the inline asm string in the AsmPrinter.
If we find a reserved register, we print a warning:
repro.c:6:7: warning: inline asm clobber list contains reserved registers: R7 [-Winline-asm]
"mov r7, #1"
^
Reviewers: efriedma, olista01, javed.absar
Reviewed By: efriedma
Subscribers: eraman, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D51165
llvm-svn: 341062
Providing that the load is known to be 4 byte aligned, we can optimise a
ldr(adr address) to just ldr address.
Differential Revision: https://reviews.llvm.org/D51030
llvm-svn: 341058
We now only add +64bit to the CPU string for "generic" CPU. All other CPU names are assumed to have the feature flag already set if they support 64-bit. I've remove the implies from CMPXCHG8 so that Feature64Bit only comes in via CPUs or user passing -mattr=+64bit.
I've changed the assert to a report_fatal_error so it's not lost in Release builds.
The test updates are to fix things that tripped the new error.
Differential Revision: https://reviews.llvm.org/D51231
llvm-svn: 341022
We don't have enough information to know if struct types being
bitcast will cause validation failures or not, so be conservative
and allow such cases to persist (fot now).
Fixes: https://bugs.llvm.org/show_bug.cgi?id=38711
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51460
llvm-svn: 341010
Variables declared with the dllimport attribute are accessed via a
stub variable named __imp_<var>. In MinGW configurations, variables that
aren't declared with a dllimport attribute might still end up imported
from another DLL with runtime pseudo relocs.
For x86_64, this avoids the risk that the target is out of range
for a 32 bit PC relative reference, in case the target DLL is loaded
further than 4 GB from the reference. It also avoids having to make the
text section writable at runtime when doing the runtime fixups, which
makes it worthwhile to do for i386 as well.
Add stub variables for all dso local data references where a definition
of the variable isn't visible within the module, since the DLL data
autoimporting might make them imported even though they are marked as
dso local within LLVM.
Don't do this for variables that actually are defined within the same
module, since we then know for sure that it actually is dso local.
Don't do this for references to functions, since there's no need for
runtime pseudo relocations for autoimporting them; if a function from
a different DLL is called without the appropriate dllimport attribute,
the call just gets routed via a thunk instead.
GCC does something similar since 4.9 (when compiling with -mcmodel=medium
or large; from that version, medium is the default code model for x86_64
mingw), but only for x86_64.
Differential Revision: https://reviews.llvm.org/D51288
llvm-svn: 340942
MipsSEInstrInfo class defines for internal purpose unconditional
branches as Mips::B nad Mips:J even in case of microMIPS code
generation. Under some conditions that leads to the bug - for rather long
branch which fits to Mips jump instruction offset size, but does not fit
to microMIPS jump offset size, we generate 'short' branch and later show
an error 'out of range PC16 fixup' after check in the isBranchOffsetInRange
routine.
Differential revision: https://reviews.llvm.org/D50615
llvm-svn: 340932
Involves microMIPS's jump in the analyzable branch set to reduce some
code patterns.
Differential revision: https://reviews.llvm.org/D50613
llvm-svn: 340931
For a certain combination of options, BuildPairF64_{64}, ExtractElementF64{_64}
may be expanded into instructions using stack.
Add implicit operand $sp for such cases so that ShrinkWrapping doesn't move
prologue setup below them.
Fixes MultiSource/Benchmarks/MallocBench/cfrac for
'--target=mips-img-linux-gnu -mcpu=mips32r6 -mfpxx -mnan=2008'
and
'--target=mips-img-linux-gnu -mcpu=mips32r6 -mfp64 -mnan=2008 -mno-odd-spreg'.
Differential Revision: https://reviews.llvm.org/D50986
llvm-svn: 340927
Noticed while looking at D49562 codegen - we can avoid a large constant mask load and a slow VPBLENDVB select op by using VPBLENDW+VPBLENDD instead.
TODO: As discussed on the patch, we should investigate adding VPBLENDVB handling to target shuffle combining as well, that will allow us to extend this to VPBLENDW+VPBLENDW+VPBLENDD.
Differential Revision: https://reviews.llvm.org/D50074
llvm-svn: 340913
Summary:
Add some optional code to validate getInstSizeInBytes for emitted
instructions. This flushed out some issues which are fixed by this
patch:
- Streamline getInstSizeInBytes
- Properly define the VI readlane/writelane instruction as VOP3
- Fix the inline constant determination. Specifically, this change
fixes an issue where a 32-bit value of 0xffffffff was recorded
as unsigned. This is equal to -1 when restricting to a 32-bit
comparison, and an inline constant can be used.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D50629
Change-Id: Id87c3b7975839da0de8156a124b0ce98c5fb47f2
llvm-svn: 340903
These are intrinsics for supporting kadd builtins in clang. These builtins are already in gcc to implement intrinsics from icc. Though they are missing from the Intel Intrinsics Guide.
This instruction adds two mask registers together as if they were scalar rather than a vXi1. We might be able to get away with a bitcast to scalar and a normal add instruction, but that would require DAG combine smarts in the backend to recoqnize add+bitcast. For now I'd prefer to go with the easiest implementation so we can get these builtins in to clang with good codegen.
Differential Revision: https://reviews.llvm.org/D51370
llvm-svn: 340869
This can leave behind the uses with the defs removed.
Since this should only really happen in tests, it's not worth the
effort of trying to handle this.
llvm-svn: 340866
Summary:
Add comments to help readers avoid having to read tablegen backends to
understand the code. Also remove unecessary breaks from the output.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51371
llvm-svn: 340864
The original motivating example uses a 64-bit add, so the carry
is used. Insert a copy from VCC. This may allow shrinking of
the used carry instruction. At worst, we are replacing a
mov to materialize the constant with a copy of vcc.
llvm-svn: 340862
This needs to be done in the SSA fold operands
pass to be effective, so there is a bit of overlap
with SIShrinkInstructions but I don't think this
is practically avoidable.
llvm-svn: 340859
These instructions were added on the PentiumPro along with CMOV.
This was already comprehended by the lowering process which should emit an alternate sequence using FCOM and FNSTW. This just makes it an explicit error if that doesn't work for some reason.
llvm-svn: 340844
This patch creates the shift mask and actual shift using the vXi16 vector shift ops.
Differential Revision: https://reviews.llvm.org/D51263
llvm-svn: 340813
This patch issues an error message if Darwin ABI is attempted with the PPC
backend. It also cleans up existing test cases, either converting the test to
use an alternative triple or removing the test if the coverage is no longer
needed.
Updated Tests
-------------
The majority of test cases were updated to use a different triple that does not
include the Darwin ABI. Many tests were also updated to use FileCheck, in place
of grep.
Deleted Tests
-------------
llvm/test/tools/dsymutil/PowerPC/sibling.test was originally added to test
specific functionality of dsymutil using an object file created with an old
version of llvm-gcc for a Powerbook G4. After a discussion with @JDevlieghere he
suggested removing the test.
llvm/test/CodeGen/PowerPC/combine_loads_from_build_pair.ll was converted from a
PPC test to a SystemZ test, as the behavior is also reproducible there.
All other tests that were deleted were specific to the darwin/ppc ABI and no
longer necessary.
Phabricator Review: https://reviews.llvm.org/D50988
llvm-svn: 340795
Summary:
The new stackification backend generates the giant switch statement
used to translate instructions to their stackified forms. I did this
because it was more interesting than adding all the different vector
versions of the various SIMD instructions to the switch statment
manually.
Reviewers: aardappel, aheejin, dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51318
llvm-svn: 340781
Loosens an assert in getMemRIX16Encoding that restricts DQ-form instructions to
using an immediate, so that we can assemble instructions like lxv/stxv where the
offset is an expression.
Differential Revision: https://reviews.llvm.org/D51122
llvm-svn: 340761
We're using a 256-bit PACKUS to do the truncation, but that instruction operates on 128-bit lanes. So previously we shuffled first to rearrange the lanes. But that requires 2 shuffles. Instead we can shuffle after the PACKUS using a single VPERMQ. This matches what our normal LowerTRUNCATE code does when it uses PACKUS.
Differential Revision: https://reviews.llvm.org/D51284
llvm-svn: 340757
InstCombine mucks these up a bit. So we need to do some additional pattern matching to fix it. There are a still a few special cases not handled, but this covers the general case.
Differential Revision: https://reviews.llvm.org/D50952
llvm-svn: 340756
Summary:
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51241
llvm-svn: 340750
This commit has caused failures in some internal benchmarks. Temporarily
reverting this patch until the issue can be diagnosed and fixed.
llvm-svn: 340740
Summary: If an object file ends with a relocation that is smaller
than 4 bytes we will write outside the Data array and trigger an
"Invalid index" assertion.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50971
llvm-svn: 340736
The internal benchmark failure reported by Google was due to a missing
check for the result type for the sign-extend and shift DAG. This commit
adds the check and re-commits the patch.
llvm-svn: 340734
Summary: The GR740 provides an up cycle counter in the registers ASR22
and ASR23. As these registers can not be read together atomically we only
use the value of ASR23 for llvm.readcyclecounter(). The ASR23 register
holds the 32 LSBs of the up-counter.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: jfb, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48638
llvm-svn: 340733
Summary:
Currently bitcasting constants from f64 to v2i32 is done by storing the
value to the stack and then loading it again. This is not necessary, but
seems to happen because v2i32 is a valid type for Sparc V8. If it had not
been legal, we would have gotten help from the type legalizer.
This patch tries to do the same work as the legalizer would have done by
bitcasting the floating point constant and splitting the value up into a
vector of two i32 values.
Reviewers: venkatra, jyknight
Reviewed By: jyknight
Subscribers: glaubitz, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D49219
llvm-svn: 340723
We cannot directy reuse the patterns of StPat because for some reason the store
DAG node and the atomic_store_nn DAG nodes put the ptr and the value in
different positions. Currently we attempt to store the address to an address
formed by the value.
Differential Revision: https://reviews.llvm.org/D51217
llvm-svn: 340722
vXi32 support was recently moved from LowerMUL_LOHI to LowerMULH.
This commit shares the getOperand calls, switches both to use common IsSigned flag, and hoists the NumElems/NumElts variable.
llvm-svn: 340720
Summary: This was inheriting the cost from the AVX table, but should be legal under AVX512.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51267
llvm-svn: 340708
Summary:
Previously most CPUs inherited cmov support through Feature64Bit(or FeatureCMPXCHG16HB implying Feature64Bit) or FeatureSSE1.
This has the surprising side effect that -mattr=-cmov causes an assert to fire in 64-bit mode because it clears the Feature64Bit. Or in 32-bit mode, -mattr=-cmov disables any sse/avx features which seems surprising.
This patch removes the implication and instead updates hasCMOV in X86Subtarget to check SSE1 or is64Bit in addition to the regular cmov flag. This should keep most things working the way they did before. I don't believe there is a way to specific "-cmov" directly from clang so this should only effect our lower level tools.
This does stop -mattr=cx16(cmpxchg16b) from implying cmov is enabled via the 64bit flag as you can see from one of the changed tests. But that was a 32-bit test so I don't know why it enabled cx16 anyway.
For the other test I had to add -sse to override the new sse check in hasCMOV.
Reviewers: RKSimon, DavidKreitzer, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51228
llvm-svn: 340707
Summary: This matches gcc and one cpuid dump I found online. Given that these are considered 7th generation x86 CPU it seems likely they support cmov since cmov was added by Intel in their 6th generation.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51264
llvm-svn: 340706
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Legalize G_ADD for types smaller than i32.
LegalizationArtifactCombiner replaces extend instructions with appropriate
bitwise instructions.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51213
llvm-svn: 340697
Summary:
The only time vector SMUL_LOHI/UMUL_LOHI nodes are created is during division/remainder lowering. If its created before op legalization, generic DAGCombine immediately turns that SMUL_LOHI/UMUL_LOHI into a MULHS/MULHU since only the upper half is used. That node will stick around through vector op legalization and will be turned back into UMUL_LOHI/SMUL_LOHI during op legalization. It will then be custom lowered by the X86 backend. Due to this two step lowering the vector shuffles created by the custom lowering get legalized after their inputs rather than before. This prevents the shuffles from being combined with any build_vector of constants.
This patch uses changes vXi32 to use MULHS/MULHU instead. This is what the later DAG combine did anyway. But by skipping the change back to UMUL_LOHI/SMUL_LOHI we lower it before any constant BUILD_VECTORS. This allows the vector_shuffle creation to constant fold with the build_vectors. This accounts for the test changes here.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51254
llvm-svn: 340690
Summary:
Previously the value being stored is the last operand in SDNode. This causes the type legalizer to visit the mask operand before the value operand. The type legalizer was more complicated because of this since we want the type of the value to drive the decisions.
This patch moves the value to be the first operand so we visit it first during type legalization. It also simplifies the type legalization code accordingly.
X86 is currently the only in tree target that uses this SDNode. Not sure if there are any users out of tree.
Reviewers: RKSimon, delena, hfinkel, eli.friedman
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50402
llvm-svn: 340689
This is a preliminary step for a preliminary step for D50992.
I noticed that x86 often misses chances to load a scalar directly
into a vector register.
So this patch is just allowing more of those cases to match a
broadcast op in lowerBuildVectorAsBroadcast(). The old code comment
said it doesn't make sense to use a broadcast when we're loading a
single element and everything else is undef, but I think that's the
best case in the improved tests in insert-loaded-scalar.ll. We avoid
scalar-to-vector-register move and/or less efficient shuffling.
Note that there are some existing types that were already producing
a broadcast, but that happens semi-accidentally. Ie, it's not
happening as part of lowerBuildVectorAsBroadcast(). The build vector
gets expanded into load + shuffle, and then shuffle lowering produces
the broadcast.
Description of the other test diffs:
1. avx-basic.ll - replacing load+shufle is a win.
2. sse3-avx-addsub-2.ll - vmovddup vs. vbroadcastss is neutral
3. sse41.ll - don't care - we convert that intrinsic to generic IR now, so this test is deprecated
4. vector-shuffle-128-v8.ll / vector-shuffle-256-v16.ll - pshufb alternatives with an extra instruction are not obviously bad
Differential Revision: https://reviews.llvm.org/D51125
llvm-svn: 340685
Summary:
Patch by Marek Olsak and David Stuttard, both of AMD.
This adds a new amdgcn intrinsic supporting s.buffer.load, in particular
multiple dword variants. These are convenient to use from some front-end
implementations.
Also modified the existing llvm.SI.load.const intrinsic to common up the
underlying implementation.
This modification also requires that we can lower to non-uniform loads correctly
by splitting larger dword variants into sizes supported by the non-uniform
versions of the load.
V2: Addressed minor review comments.
V3: i1 glc is now i32 cachepolicy for consistency with buffer and
tbuffer intrinsics, plus fixed formatting issue.
V4: Added glc test.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51098
Change-Id: I83a6e00681158bb243591a94a51c7baa445f169b
llvm-svn: 340684
This patch will address using the xscpsgndp instruction to copy floating point
scalar registers instead of the xxlor (specifically XXLORf) instruction that is
currently used. Additionally, this patch of utilizing xscpsgndp will apply to
P9, while pre-P9 will still use xxlor.
Patch by amyk
Differential Revision: https://reviews.llvm.org/D50004
llvm-svn: 340643
This adds a new method to ELFObjectFileBase that returns the symbols and addresses of PLT entries.
This design was suggested by pcc and eugenis in https://reviews.llvm.org/D49383.
Differential Revision: https://reviews.llvm.org/D50203
llvm-svn: 340610
Lower integer arguments smaller than i32.
Support both register and stack arguments.
Define setLocInfo function for setting LocInfo field in ArgLocs vector.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51031
llvm-svn: 340572
Summary:
Splats are fewer bytes than v128.consts, so use them when either could
apply.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51179
llvm-svn: 340569
The commit that added this functionality:
rL322957
may be causing/exposing a miscompile in PR38648:
https://bugs.llvm.org/show_bug.cgi?id=38648
so allow enabling/disabling to make debugging easier.
llvm-svn: 340540
subtarget features for indirect calls and indirect branches.
This is in preparation for enabling *only* the call retpolines when
using speculative load hardening.
I've continued to use subtarget features for now as they continue to
seem the best fit given the lack of other retpoline like constructs so
far.
The LLVM side is pretty simple. I'd like to eventually get rid of the
old feature, but not sure what backwards compatibility issues that will
cause.
This does remove the "implies" from requesting an external thunk. This
always seemed somewhat questionable and is now clearly not desirable --
you specify a thunk the same way no matter which set of things are
getting retpolines.
I really want to keep this nicely isolated from end users and just an
LLVM implementation detail, so I've moved the `-mretpoline` flag in
Clang to no longer rely on a specific subtarget feature by that name and
instead to be directly handled. In some ways this is simpler, but in
order to preserve existing behavior I've had to add some fallback code
so that users who relied on merely passing -mretpoline-external-thunk
continue to get the same behavior. We should eventually remove this
I suspect (we have never tested that it works!) but I've not done that
in this patch.
Differential Revision: https://reviews.llvm.org/D51150
llvm-svn: 340515
Summary:
Reorganize WebAssemblyInstrSIMD.td to put all of the instruction
definitions together, making it easier to see which instructions have
been implemented already. Depends on D51143.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51113
llvm-svn: 340504
Summary:
WebAssemblyInstrFormats.td retains only multiclasses that are used in
multiple other tablegen files.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51143
llvm-svn: 340503
Previously we asumed a vector reduction add is part of a loop and one of the input is a phi. But the code in SelectionDAGBuilder that sets vector reduction flag handles more cases than that. It just requires that the use chain ends in a horizontal reduction. And there are no other uses. This means it can handle unrolled reduction loops.
If the initial value of the reduction was 0, an unrolled loop would begin with a vector reduction add that has two sad inputs. Previously we would only transform one side of the add, but for this case we need to transform both sides.
I've created a lambda to reuse some of the code for both sides. And fixed the variables names to remove reference to "phi".
Differential Revision: https://reviews.llvm.org/D50817
llvm-svn: 340478
Summary:
This CL adds support for arbitrary BUILD_VECTORS, i.e. not splats and
not consts. This is the last feature needed to properly lower v2i64
multiplies without a i64x2.mul instruction (which is not in the spec),
so i64x2.mul is removed as well.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51082
Remove unnecessary condition and fix whitespace
llvm-svn: 340472
The inline sequence is very long (about 70 bytes on Thumb1), so it's
not really a good idea to inline it, especially when optimizing for
size.
Differential Revision: https://reviews.llvm.org/D47917
llvm-svn: 340458
Fix bug https://bugs.llvm.org/show_bug.cgi?id=38643
In BPFAsmBackend applyFixup(), there is an assertion for FixedValue to be 0.
This may not be true, esp. for optimiation level 0.
For example, in the above bug, for the following two
static variables:
@bpf_map_lookup_elem = internal global i8* (i8*, i8*)*
inttoptr (i64 1 to i8* (i8*, i8*)*), align 8
@bpf_map_update_elem = internal global i32 (i8*, i8*, i8*, i64)*
inttoptr (i64 2 to i32 (i8*, i8*, i8*, i64)*), align 8
The static variable @bpf_map_update_elem will have a symbol
offset of 8 and a FK_SecRel_8 with FixupValue 8 will cause
the assertion if llvm is built with -DLLVM_ENABLE_ASSERTIONS=ON.
The above relocations will not exist if the program is compiled
with optimization level -O1 and above as the compiler optimizes
those static variables away. In the below error message, -O2
is suggested as this is the common practice.
Note that FixedValue = 0 in applyFixup() does exist and is valid,
e.g., for the global variable my_map in the above bug. The bpf
loader will process them properly for map_id's before loading
the program into the kernel.
The static variables, which are not optimized away by compiler,
may have FK_SecRel_8 relocation with non-zero FixedValue.
The patch removed the offending assertion and will issue
a hard error as below if the FixedValue in applyFixup()
is not 0.
$ llc -march=bpf -filetype=obj fixup.ll
LLVM ERROR: Unsupported relocation: try to compile with -O2 or above,
or check your static variable usage
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 340455
Summary:
When we don't actually have stack-allocated variables but need SP only
to support EH, we don't need to write SP back in the epilog, because we
don't bump down the stack pointer.
Reviewers: dschuff
Subscribers: jgravelle-google, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51114
llvm-svn: 340454
On Windows, movw+movt pairs with relocations are handled with a single
relocation that covers them both. Therefore we can't inject anything
between these instructions, otherwise the relocation (which in LLVM
only is treated as the movw instruction's relocation, while the movt
instruction's relocation is dropped) will end up bogus.
These instructions are bundled up until right before the constant
islands pass, making this effectively the only place that can split
them apart.
Differential Revision: https://reviews.llvm.org/D51032
llvm-svn: 340451
This avoids a potential infinite loop setting and unsetting bits in the
mask.
Reduced from a failure on the polly-aosp bot.
Differential Revision: https://reviews.llvm.org/D51066
llvm-svn: 340446
Inspired by what AArch64 does for shifts, this patch attempts to replace shift amounts with neg if we can.
This is done directly as part of isel so its as late as possible to avoid breaking some BZHI patterns since those patterns need an unmasked (32-n) to be correct.
To avoid manual load folding and custom instruction selection for the negate. I've inserted new nodes in the DAG above the shift node in topological order.
Differential Revision: https://reviews.llvm.org/D48789
llvm-svn: 340441
Summary:
There are several functions in the form of `has***` or `needs***` in
`WebAssemblyFrameLowering` and its `MachineFrameInfo` argument can be
obtained from `MachineFunction` so it is not necessarily has to be
passed from a caller. Also, it is more in line with other overriden
fuctions like `hasBP` or `hasReservedCallFrame`, which also take only
`MachineFunction` argument.
Reviewers: dschuff
Subscribers: sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51116
llvm-svn: 340438
When the key is not already in the map, the access operator[] creates an empty value and grows the map.
Resizing a map is very slow, so this needs to be avoided.
Found with csmith + asserts.
May help with
https://bugs.llvm.org/show_bug.cgi?id=25843
Patch by Tom Rix.
Differential Revision: https://reviews.llvm.org/D50780
llvm-svn: 340434
Summary:
`catch` instruction certainly has rather huge side effects and the flag
was missing. At the moment this does not change any unit tests we
currently have.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50919
llvm-svn: 340433
32-bit constant address space is declared as 6, so the
maximum number of address spaces is 6, not 5.
Fixes "LLVM ERROR: Pointer address space out of range".
v5: rename MAX_COMMON_ADDRESS to MAX_AMDGPU_ADDRESS
v4: - fix compilation issues
- fix out of bounds access
v3: use static_assert()
v2: add a very simple test for 32-bit addr space
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106630
llvm-svn: 340417
Constant and global may alias, also one rules table wasn't
ordered correctly.
Pinpointed by Matt.
v2: add a test with swapped parameters
llvm-svn: 340416
Add intrinsic isel patterns for sxtb16, sxtab16, uxtb16 and uxtab16
so that they can perform a ror.
Differential Revision: https://reviews.llvm.org/D51034
llvm-svn: 340405
This adds the plumbing for the Tiny code model for the AArch64 backend. This,
instead of loading addresses through the normal ADRP;ADD pair used in the Small
model, uses a single ADR. The 21 bit range of an ADR means that the code and
its statically defined symbols need to be within 1MB of each other.
This makes it mostly interesting for embedded applications where we want to fit
as much as we can in as small a space as possible.
Differential Revision: https://reviews.llvm.org/D49673
llvm-svn: 340397
This was hackily adding in the 4-bytes reserved for the callee's
emergency stack slot. Treat it like a normal stack allocation
so we get the correct alignment padding behavior. This fixes
an inconsistency between the caller and callee.
llvm-svn: 340396
Add patterns for unhandled CondCode enumerables:
SETEQ, SETGE, SETGT, SETLE, SETLT, SETNE.
Stated at the ISD::CondCode enum declaration:
`All of these (except for the 'always folded ops')
should be handled for floating point.`
Add patterns which use these nodes, same as corresponding
'ordered' CondCode nodes.
Referring to 'Ordered means that neither operand is a QNAN'
we assume it is safe to match ex. SETLT node to the same
instruction as SETOLT.
Differential Revision: https://reviews.llvm.org/D50757
llvm-svn: 340392
Summary: We now write back not to memory but to __stack_pointer global.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51074
llvm-svn: 340372
In general we can't assume flat loads are uniform, and cases where we can prove
they are should be handled through infer-address-spaces.
Differential Revision: https://reviews.llvm.org/D50991
llvm-svn: 340343
Summary:
After the stack is unwound due to a thrown exception, the
`__stack_pointer` global can point to an invalid address. This inserts
instructions that restore `__stack_pointer` global.
Reviewers: jgravelle-google, dschuff
Subscribers: mgorny, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50980
llvm-svn: 340339
Summary:
This CL implements v128.const for each vector type. New operand types
are added to ensure the vector contents can be serialized without LEB
encoding. Tests are added for instruction selection, encoding,
assembly and disassembly.
Reviewers: aheejin, dschuff, aardappel
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50873
llvm-svn: 340336
Summary: SP is now a __stack_pointer global and not a memory address anymore.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51046
llvm-svn: 340328
Summary:
So far, `isReturn` property is used to mean both a return instruction
from a functon and the end of an EH scope, a scope that starts with a EH
scope entry BB and ends with a catchret or a cleanupret instruction.
Because WinEH uses funclets, all EH-scope-ending instructions are also
real return instruction from a function. But for wasm, they only serve
as the end marker of an EH scope but not a return instruction that
exits a function. This mismatch caused incorrect prolog and epilog
generation in wasm EH scopes. This patch fixes this.
This patch is in the same vein with rL333045, which splits
`MachineBasicBlock::isEHFuncletEntry` into `isEHFuncletEntry` and
`isEHScopeEntry`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50653
llvm-svn: 340325
Most of these shifts are extended to vXi16 so we don't gain anything from forcing another round of generic shift lowering - we know these extended cases are legal constant splat shifts.
llvm-svn: 340307
Summary: When run under llvm-mc-disassemble-fuzzer, there is no symbol lookup callback so tryAddingSymbolicOperand() must fail gracefully instead of crashing
Reviewers: aemerson, javed.absar
Reviewed By: aemerson
Subscribers: lhames, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D51005
llvm-svn: 340287
Summary:
Previously the new llvm.amdgcn.raw/struct.buffer.load/store intrinsics
only allowed float types for the data to be loaded or stored, which
sometimes meant the frontend needed to generate a bitcast. In this, the
new intrinsics copied the old buffer intrinsics.
This commit extends the new intrinsics to allow int types as well.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D50315
Change-Id: I8202af2d036455553681dcbb3d7d32ae273f8f85
llvm-svn: 340270
Summary:
This commit adds new intrinsics
llvm.amdgcn.raw.buffer.load
llvm.amdgcn.raw.buffer.load.format
llvm.amdgcn.raw.buffer.load.format.d16
llvm.amdgcn.struct.buffer.load
llvm.amdgcn.struct.buffer.load.format
llvm.amdgcn.struct.buffer.load.format.d16
llvm.amdgcn.raw.buffer.store
llvm.amdgcn.raw.buffer.store.format
llvm.amdgcn.raw.buffer.store.format.d16
llvm.amdgcn.struct.buffer.store
llvm.amdgcn.struct.buffer.store.format
llvm.amdgcn.struct.buffer.store.format.d16
llvm.amdgcn.raw.buffer.atomic.*
llvm.amdgcn.struct.buffer.atomic.*
with the following changes from the llvm.amdgcn.buffer.*
intrinsics:
* there are separate raw and struct versions: raw does not have an
index arg and sets idxen=0 in the instruction, and struct always sets
idxen=1 in the instruction even if the index is 0, to allow for the
fact that gfx9 does bounds checking differently depending on whether
idxen is set;
* there is a combined cachepolicy arg (glc+slc)
* there are now only two offset args: one for the offset that is
included in bounds checking and swizzling, to be split between the
instruction's voffset and immoffset fields, and one for the offset
that is excluded from bounds checking and swizzling, to go into the
instruction's soffset field.
The AMDISD::BUFFER_* SD nodes always have an index operand, all three
offset operands, combined cachepolicy operand, and an extra idxen
operand.
The obsolescent llvm.amdgcn.buffer.* intrinsics continue to work.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50306
Change-Id: If897ea7dc34fcbf4d5496e98cc99a934f62fc205
llvm-svn: 340269
Summary:
This commit adds new intrinsics
llvm.amdgcn.raw.tbuffer.load
llvm.amdgcn.struct.tbuffer.load
llvm.amdgcn.raw.tbuffer.store
llvm.amdgcn.struct.tbuffer.store
with the following changes from the llvm.amdgcn.tbuffer.* intrinsics:
* there are separate raw and struct versions: raw does not have an index
arg and sets idxen=0 in the instruction, and struct always sets
idxen=1 in the instruction even if the index is 0, to allow for the
fact that gfx9 does bounds checking differently depending on whether
idxen is set;
* there is a combined format arg (dfmt+nfmt)
* there is a combined cachepolicy arg (glc+slc)
* there are now only two offset args: one for the offset that is
included in bounds checking and swizzling, to be split between the
instruction's voffset and immoffset fields, and one for the offset
that is excluded from bounds checking and swizzling, to go into the
instruction's soffset field.
The AMDISD::TBUFFER_* SD nodes always have an index operand, all three
offset operands, combined format operand, combined cachepolicy operand,
and an extra idxen operand.
The tbuffer pseudo- and real instructions now also have a combined
format operand.
The obsolescent llvm.amdgcn.tbuffer.* and llvm.SI.tbuffer.store
intrinsics continue to work.
V2: Separate raw and struct intrinsics.
V3: Moved extract_glc and extract_slc defs to a more sensible place.
V4: Rebased on D49995.
V5: Only two separate offset args instead of three.
V6: Pseudo- and real instructions have joint format operand.
V7: Restored optionality of dfmt and nfmt in assembler.
V8: Addressed minor review comments.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D49026
Change-Id: If22ad77e349fac3a5d2f72dda53c010377d470d4
llvm-svn: 340268
Summary:
We decided to revert this from i64 to i32 in Nov 28 CG meeting. Fixes
PR38632.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51010
llvm-svn: 340234
Due to some splat handling code in getVectorShuffle, its possible for NewV1/NewV2 to have their mask modified from what is requested. This can lead to cycles being created in the DAG.
This patch examines the returned mask and makes sure its different. Long term we may need to look closer at that splat code in getVectorShuffle, or add more splat awareness to getVectorShuffle.
Fixes PR38639
Differential Revision: https://reviews.llvm.org/D50981
llvm-svn: 340214
We can safely avoid interfering with the subus combine if both inputs are freely truncatable. Either both extends, or an extend and a constant vector.
Differential Revision: https://reviews.llvm.org/D50878
llvm-svn: 340212
getTargetCustom() requires values for "Kind" in the constructor
that are not in the PSVKind enum. Passing a value that is not inside
an enum as an argument to a constructor of the type of the enum is
UB. Changing to the underlying type of the enum would solve the UB
Differential Revision: https://reviews.llvm.org/D50909
llvm-svn: 340200
32-bit constant address space is declared as 6, so the
maximum number of address spaces is 6, not 5.
Fixes "LLVM ERROR: Pointer address space out of range".
v3: use static_assert()
v2: add a very simple test for 32-bit addr space
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106630
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 340171
This patch adds system registers for controlling aspects of SVE:
- ZCR_EL1 (r/w) visible at EL1 and EL0.
- ZCR_EL2 (r/w) visible at EL2 and Non-secure EL1 and EL0.
- ZCR_EL3 (r/w) visible at all exception levels.
and a system register identifying SVE:
- ID_AA64ZFR0_EL1 (r) SVE Feature identifier.
Reviewers: SjoerdMeijer, samparker, pbarrio, fhahn, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D50885
llvm-svn: 340158
If the arch is P8, we will select XFLOAD to load the floating point, and then, expand it to vsx and non-vsx X-form instruction post RA. This patch is trying to convert the X-form to D-form if it meets the requirement that one operand of the x-form inst is the special Zero register, and another operand fed by add inst. i.e.
y = add imm, reg
LFDX. 0, y
-->
LFD imm(reg)
Reviewers: Nemanjai
Differential Revision: https://reviews.llvm.org/D49007
llvm-svn: 340149
We were basically assuming only one operand of the compare could be an ADD node and using that to swap operands. But we can have a normal add followed by a saturing add.
This rewrites the canonicalization to just be based on the condition code.
llvm-svn: 340134
The code already support 128 and 256 and even knows to split 256 for AVX1. So we really just needed to stop looking for specific VTs and subtarget features and just look for legal VTs with i8/i16 elements.
While there, add some curly braces around outer if statement bodies that contain only another if. It makes all the closing curly braces look more regular.
llvm-svn: 340128
Extending the concept introduced in D49562, this patch lowers constant vXi8 ISD::SRL/ISD::SRA by zero/sign extending to vXi16 and using PMULLW and then truncating the high 8 bits of the result.
Differential Revision: https://reviews.llvm.org/D50781
llvm-svn: 340062
isOnlyUserOf is a little heavier because it allows the node to be used multiple times by the other node. In this case we are looking at a truncate which only has one operand so we know it can only use it once. Thus hasOneUse is better.
llvm-svn: 340059
This patch addresses:
- Implementation within PPCISelLowering.cpp to check if we should use direct
load into vector instructions (such as lxsd/lfd ) when the scalar_to_vector
function is used; which will allow us to catch as many cases of the
scalar_to_vector uses as possible to translate the ld->mtvsrd sequence into
lxsd.
- Test cases to exhibit the behaviour of emitting lxsd/lfd.
Patch by amyk
Differential revision: https://reviews.llvm.org/D49698
llvm-svn: 340037
test/CodeGen/X86/shadow-stack.ll has the following machine verifier
errors:
```
*** Bad machine code: Using a killed virtual register ***
- function: bar
- basic block: %bb.6 entry (0x7fdc81857818)
- instruction: %3:gr64 = MOV64rm killed %2:gr64, 1, $noreg, 8, $noreg
- operand 1: killed %2:gr64
*** Bad machine code: Using a killed virtual register ***
- function: bar
- basic block: %bb.6 entry (0x7fdc81857818)
- instruction: $rsp = MOV64rm killed %2:gr64, 1, $noreg, 16, $noreg
- operand 1: killed %2:gr64
*** Bad machine code: Virtual register killed in block, but needed live out. ***
- function: bar
- basic block: %bb.2 entry (0x7fdc818574f8)
Virtual register %2 is used after the block.
```
The fix here is to only copy the machine operand's register without the
kill flags for all the instructions except the very last one of the
sequence.
I had to insert dummy PHIs in the test case to force the NoPHI function
property to be set to false. More on this here: https://llvm.org/PR38439
Differential Revision: https://reviews.llvm.org/D50260
llvm-svn: 340033
This function is not virtual, it is private and it is not called anywhere. No
regression is introduced by removing it.
I think we can safely remove it.
Differential Revision: https://reviews.llvm.org/D50836
llvm-svn: 340024
- Generate pointer authentication instructions
- The functions instrumented depend on function attribtues:
all (all functions instrumentent)
non-leaf (only those that spill LR)
none
- Function epilogues sign the LR before spilling to the stack and authenticate
the LR once restored
- If the target is v8.3a or greater than can use the combined authenticate and
return instruction
Differential revision: https://reviews.llvm.org/D49793
llvm-svn: 340018
Add a DAG combine for the PowerPC code generator to generate the Power9 extswsli
extend sign and shift immediate instruction.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D49879
llvm-svn: 340016
Add +fp16fml feature for new FP16 instructions, which are a
mandatory part of FP16 from v8.4-A and an optional part of FP16
from v8.2-A. It doesn't seem to be possible to model this in
LLVM, but the relationship between the options is handled by
the related clang patch.
In keeping with what I think is the usual practice, the fp16fml
extension is accepted regardless of base architecture version.
Builds on/replaces Sjoerd Meijer's patch to add these instructions at
https://reviews.llvm.org/D49839.
Differential Revision: https://reviews.llvm.org/D50228
llvm-svn: 340013
Summary:
Looking at the callee argument list, as is done now, might not work if
the function has been typecasted into one that is expected to return
a struct. This change also simplifies the code.
The isFP128ABICall() function can be removed as it is no longer needed.
The test in fp128.ll has been updated to verify this.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48117
llvm-svn: 340008
Summary: When @llvm.returnaddress is called with a value higher than 0
it needs to read from the call stack to get the return address. This
means that the register windows needs to be flushed to the stack to
guarantee that the data read is valid. For values higher than 1 this
is done indirectly by the call to getFRAMEADDR(), but not for the value 1.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48636
llvm-svn: 340003
Summary:
This adds support for exception handling to CFGStackify pass. This only
adds TRY / END_TRY markers and DOES NOT yet fix unwind mismatches that
can be created by the linearization of the CFG into the structural wasm
format. The mismatch fix will be added by following patches.
In detail, this patch
- Added support for TRY / END_TRY markers to support EH
- Changed many static functions into class member functions as they take
too many arguments now
- Added several more bookeeping data structures
- Refactored routines that decide where to insert markers, because
without refactoring this got too complicated as we added support for new
kinds of markers (TRY/END_TRY).
- Rewrote rethrow instructions' BB arguments to relative depths in EH
pad stack.
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D48273
llvm-svn: 339967
Normally the peephole pass converts EXTRACT_SUBREG to COPY instructions. But we're after peephole so we can't rely on it to clean these up.
To fix this, the eflags pass now emits a COPY with a subreg input.
I also noticed that in 32-bit mode we need to constrain the input to the copy to ensure the subreg is valid. Otherwise we'll fail verify-machineinstrs
Differential Revision: https://reviews.llvm.org/D50656
llvm-svn: 339945
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
Summary:
EM_ASM no longer is lowered as varargs in C, so this workaround is
obsolete.
Reviewers: dschuff, sunfish
Subscribers: sbc100, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D50859
llvm-svn: 339925
Summary:
This prefix was added in r333421, and it changed our dumper output to
say things like "CVRegEAX" instead of just "EAX". That's a functional
change that I'd rather avoid.
I tested GCC, Clang, and MSVC, and all of them support #pragma
push_macro. They don't issue warnings whem the macro is not defined
either.
I don't have a Mac so I can't test the real termios.h header, but I
looked at the termios.h sources online and looked for other conflicts.
I saw only the CR* macros, so those are the ones we work around.
Reviewers: zturner, JDevlieghere
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50851
llvm-svn: 339907
This will allow the library to just use __builtin_expf directly
without expanding this itself. Note f64 still won't work because
there is no exp instruction for it.
llvm-svn: 339902
Allow the comparison of x86 registers in the evaluation of assembler
directives. This generalizes and simplifies the extension from r334022
to catch another case found in the Linux kernel.
Reviewers: rnk, void
Reviewed By: rnk
Subscribers: hiraditya, nickdesaulniers, llvm-commits
Differential Revision: https://reviews.llvm.org/D50795
llvm-svn: 339895
When compiling with /arch:AVX512 and optimizations turned on,
we could crash while emitting debug info because we did not
have CodeView register constants for the AVX 512 register
set defined. This patch defines them.
Differential Revision: https://reviews.llvm.org/D50819
llvm-svn: 339893
While searching through the use-def tree, ignore GetElementPtrInst
instructions because they don't need promoting and neither do their
indices. Otherwise, the wide indices prevent the transformation from
happening.
Differential Revision: https://reviews.llvm.org/D50762
llvm-svn: 339871
Originally committed in r339755 which was reverted in r339806 due to
an asan issue. The issue was caused by my assumption that operands to
a CallInst mapped to the FunctionType Params. CallInsts are now
handled by iterating over their ArgOperands instead of Operands.
Original Message:
Treat signed icmps as 'sinks', allowing them to be in the use-def
tree, enabling more promotions to be performed. As a sink, any
promoted incoming values need to be truncated before being used by
the signed icmp.
Differential Revision: https://reviews.llvm.org/D50067
llvm-svn: 339858
a shorter name ('x86-slh') for the internal flags and pass name.
Without this, you can't use the -stop-after or -stop-before
infrastructure. I seem to have just missed this when originally adding
the pass.
The shorter name solves two problems. First, the flag names were ...
really long and hard to type/manage. Second, the pass name can't be the
exact same as the flag name used to enable this, and there are already
some users of that flag name so I'm avoiding changing it unnecessarily.
llvm-svn: 339836
Handle fmul, fsub and preserve flags.
Also really test minnum/maxnum reductions.
The existing tests were only checking from
minnum/maxnum matched from a fast math compare
and select which is not the same.
llvm-svn: 339820
To lower this we now create a new V1 containing the low half of both sources and a new V2 containing the upper half of both sources. Then we created a repeated lane shuffle of those new sources to create the final result.
This fixes PR35833
Differential Revison: https://reviews.llvm.org/D41794
llvm-svn: 339818
Summary:
This CL changes the ExtractLane ISEL multiclass to more closely mirror
the structure of the splat and replace_lane multiclasses.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50794
llvm-svn: 339801
To make ISD::VSELECT available(legal) so long as there are altivec instruction,
otherwise it's default behavior is expanding.
Use xxsel to match vselect if vsx is open, or use vsel.
In order to do not write many patterns in td file, promote (for vector it's
bitcast) all other type into v4i32 and only pattern match vselect of v4i32 into
vsel or xxsel.
Patch by wuzish
Differential revision: https://reviews.llvm.org/D49531
llvm-svn: 339779
Change
subreg_r32 -> subreg_h32
subreg_r64 -> subreg_h64
subreg_hr32 -> subreg_hh32
The subregisters subreg_r32 and subreg_r64 were added to emphasize the
fact that modifying these subregisters may clobber the entire register.
This is not necessarily the case for subreg_h32, et al.
However, the ability to compose subreg_h64 with subreg_r32, and with
subreg_h32 and subreg_l32 at the same time makes the compositions be
treated as non-overlapping (leading to problems when tracking subreg
liveness). See D50468 for more details.
Differential Revision: https://reviews.llvm.org/D50725
llvm-svn: 339778
This option is needed to enable subreg liveness tracking during register
allocation.
Review: Ulrich Weigand
https://reviews.llvm.org/D50779
llvm-svn: 339776
We only try to promote types with are smaller than 16-bits, but we
also need to check that the type is not less than 8-bits.
Differential Revision: https://reviews.llvm.org/D50769
llvm-svn: 339770
When trying to combine a DAG that builds a vector out of sign-extensions of
vector extracts, the code assumes legal input types. Due to that, we have to
disable this combine prior to legalization.
In some cases, the DAG will look slightly different after legalization so
account for that in the matching code.
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=38087
Differential Revision: https://reviews.llvm.org/D49080
llvm-svn: 339769
Treat signed icmps as 'sinks', allowing them to be in the use-def
tree, enabling more promotions to be performed. As a sink, any
promoted incoming values need to be truncated before being used by
the signed icmp.
Differential Revision: https://reviews.llvm.org/D50067
llvm-svn: 339755
Add pointers to the list of allowed types, but don't try to promote
them. Also fixed a bug with the promotion of undef values, so a new
value is now created instead of mutating in place. We also now only
promote if there's an instruction in the use-def chains other than
the icmp, sinks and sources.
Differential Revision: https://reviews.llvm.org/D50054
llvm-svn: 339754
AVX512 added new versions of these intrinsics that take a rounding mode. If the rounding mode is 4 the new intrinsics are equivalent to the old intrinsics.
The AVX512 intrinsics were being lowered to ISD opcodes, but the legacy SSE intrinsics were left as intrinsics. This resulted in the AVX512 instructions needing separate patterns for the ISD opcodes and the legacy SSE intrinsics.
Now we convert SSE intrinsics and AVX512 intrinsics with rounding mode 4 to the same ISD opcode so we can share the isel patterns.
llvm-svn: 339749
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
Intentionally excluding nodes from the DAGCombine worklist is likely to
lead to weird optimizations and infinite loops, so it's generally a bad
idea.
To avoid the infinite loops, fix DAGCombine to use the
isDesirableToCommuteWithShift target hook before performing the
transforms in question, and implement the target hook in the ARM backend
disable the transforms in question.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38530 . (I don't have a
reduced testcase for that bug. But we should have sufficient test
coverage for PerformSHLSimplify given that we're not playing weird
tricks with the worklist. I can try to bugpoint it if necessary,
though.)
Differential Revision: https://reviews.llvm.org/D50667
llvm-svn: 339734
Previously SIMD_I was the same as a normal instruction except for the
addition of a HasSIM128 predicate. However, rL339186 changed the
encoding of SIMD_I instructions to automatically contain the SIMD
prefix byte. This broke the encoding of non-SIMD vector-typed
instructions, which had instantiated SIMD_I. This CL corrects this
error.
Reviewers: aheejin
Subscribers: sunfish, jgravelle-google, sbc100, llvm-commits
Differential Revision: https://reviews.llvm.org/D50682
Patch by Thomas Lively (tlively)
llvm-svn: 339710
Implement instruction selection for all versions of the extract_lane
instruction. Use explicit sext/zext to differentiate between
extract_lane_s and extract_lane_u for applicable types, otherwise
default to extract_lane_u.
Reviewers: aheejin
Subscribers: sunfish, jgravelle-google, sbc100, llvm-commits
Differential Revision: https://reviews.llvm.org/D50597
Patch by Thomas Lively (tlively)
llvm-svn: 339707
This patch removes redundant template argument `TargetName` from TIIPredicate.
Tablegen can always infer the target name from the context. So we don't need to
force users of TIIPredicate to always specify it.
This allows us to better modularize the tablegen class hierarchy for the
so-called "function predicates". class FunctionPredicateBase has been added; it
is currently used as a building block for TIIPredicates. However, I plan to
reuse that class to model other function predicate classes too (i.e. not just
TIIPredicates). For example, this can be a first step towards implementing
proper support for dependency breaking instructions in tablegen.
This patch also adds a verification step on TIIPredicates in tablegen.
We cannot have multiple TIIPredicates with the same name. Otherwise, this will
cause build errors later on, when tablegen'd .inc files are included by cpp
files and then compiled.
Differential Revision: https://reviews.llvm.org/D50708
llvm-svn: 339706
rL339686 added the case where a faux shuffle might have repeated shuffle inputs coming from either side of the OR().
This patch improves the insertion of the inputs into the source ops lists to account for this, as well as making it trivial to add support for shuffles with more than 2 inputs in the future.
llvm-svn: 339696
This is a fix for r339314.
MCInstBuilder uses the named parameter idiom and an 'operator MCInst&' to ease
the creation of MCInsts. As the object of MCInstBuilder owns the MCInst is
manipulating, the lifetime of the MCInst is bound to that of MCInstBuilder.
In r339314 I bound a reference to the MCInst in an initializer. The
temporary of MCInstBuilder (and also its MCInst) is destroyed at the end of
the declaration leading to a dangling reference.
Fix this by using MCInstBuilder inside an argument of a function call.
Temporaries in function calls are destroyed in the enclosing full expression,
so the the reference to MCInst is still valid when emitToStreamer executes.
llvm-svn: 339654
Summary: This revision improves previous version (rL330322) which has been reverted due to crashes.
This is the patch that lowers x86 intrinsics to native IR
in order to enable optimizations. The patch also includes folding
of previously missing saturation patterns so that IR emits the same
machine instructions as the intrinsics.
Reviewers: craig.topper, spatel, RKSimon
Reviewed By: craig.topper
Subscribers: mike.dvoretsky, DavidKreitzer, sroland, llvm-commits
Differential Revision: https://reviews.llvm.org/D46179
llvm-svn: 339650
The behavior in 64-bit mode is different between Intel and AMD CPUs. Intel ignores the 0x66 prefix. AMD does not. objump doesn't ignore the 0x66 prefix. Since LLVM aims to match objdump behavior, we should do the same.
While I was trying to fix this I had change brtarget16/32 to use ENCODING_IW/ID instead of ENCODING_Iv to get the 0x66+REX.W case to act sort of sanely. It's still wrong, but that's a problem for another day.
The change in encoding exposed the fact that 16-bit mode disassembly of relative jumps was creating JMP_4 with a 2 byte immediate. It should have been JMP_2. From just printing you can't tell the difference, but if you dumped the encoding it wouldn't have matched what we started with.
While fixing that, it exposed that jo/jno opcodes were missing from the switch that this patch deleted and there were no test cases for them.
Fixes PR38537.
llvm-svn: 339622
Summary: The GR740 provides an up cycle counter in the
registers ASR22 and ASR23. As these registers can not be
read together atomically we only use the value of ASR23
for llvm.readcyclecounter(). The ASR23 register holds the
32 LSBs of the up-counter.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48638
llvm-svn: 339551
I'm not sure the exact nsz flag combination that
is OK. I think as long as it's on either, this is OK.
For now just check it on the omod multiply.
llvm-svn: 339513
If one of the elements is undef, use the canonicalized constant
from the other element instead of 0.
Splat vectors are more useful for other optimizations, such
as matching vector clamps. This was breaking on clamps
of half3 from the undef 4th component.
llvm-svn: 339512
Unlike the other arithmetic instructions the mem-reg form of compare is just a load and not a RMW operation. According to the Intel optimization manual, this form is also supported by macro fusion.
llvm-svn: 339498
Now we switch to the subregister in expandPostRAPseudos where we already switched the opcode.
This simplifies a few isel patterns that used the pseudo directly. And magically seems to have improved our ability to CSE it in the undef-label.ll test.
llvm-svn: 339496
Treat the stack variants of control instructions the same as regular
instructions. Otherwise, the vector ControlFlowStack will be the wrong
size and have out-of-bounds access. This was detected by MemorySanitizer.
llvm-svn: 339495
Summary:
Moved Explicit Locals pass to last.
Made that pass obligatory.
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: jfb, llvm-commits, aheejin, eraman, jgravelle-google, sbc100
Differential Revision: https://reviews.llvm.org/D50568
llvm-svn: 339474
LLVM normally prefers to minimize the number of bits set in an AND
immediate, but that doesn't always match the available ARM instructions.
In Thumb1 mode, prefer uxtb or uxth where possible; otherwise, prefer
a two-instruction sequence movs+ands or movs+bics.
Some potential improvements outlined in
ARMTargetLowering::targetShrinkDemandedConstant, but seems to work
pretty well already.
The ARMISelDAGToDAG fix ensures we don't generate an invalid UBFX
instruction due to a larger-than-expected mask. (It's orthogonal, in
some sense, but as far as I can tell it's either impossible or nearly
impossible to reproduce the bug without this change.)
According to my testing, this seems to consistently improve codesize by
a small amount by forming bic more often for ISD::AND with an immediate.
Differential Revision: https://reviews.llvm.org/D50030
llvm-svn: 339472
Enabling ARMCodeGenPrepare by default caused a whole load of
failures. This is due to zexts and truncs not being handled properly.
ZExts are messy so it's just easier to disable for now and truncs
are allowed only as 'sinks'. I still need to figure out why allowing
them as 'sources' causes so many failures. The other main changes are
that we are explicit in the types that we converting to, it's now
always 'TypeSize'. Type support is also now performed while checking
for valid opcodes as it unnecessarily complicated having the checks
are different stages.
I've moved the tests around too, so we have the zext and truncs in
their own file as well as the overflowing opcode tests.
Differential Revision: https://reviews.llvm.org/D50518
llvm-svn: 339432
Summary:
i64x2 and f64x2 operations are not implemented in V8, so we normally
do not want to emit them. However, they are in the SIMD spec proposal,
so we still want to be able to test them in the toolchain. This patch
adds a flag to enable their emission.
Reviewers: aheejin, dschuff
Subscribers: sunfish, jgravelle-google, sbc100, llvm-commits
Differential Revision: https://reviews.llvm.org/D50423
Patch by Thomas Lively (tlively)
llvm-svn: 339407
Summary:
gcc does not like
const Region *Region;
It wants a different name for the variable.
Is there a better convention for what name to use in such a case?
Reviewers: sbc100, aheejin
Subscribers: aheejin, jgravelle-google, dschuff, llvm-commits
Differential Revision: https://reviews.llvm.org/D50472
Patch by Alon Zakai (kripken)
llvm-svn: 339398
Summary:
The TType encoding, LSDA encoding, and personality encoding are all
passed explicitly by CodeGen to the assembler through .cfi_* directives,
so only the AsmPrinter needs to know about them.
The FDE CFI encoding however, controls the encoding of the label
implicitly created by the .cfi_startproc directive. That directive seems
to be special in that it doesn't take an encoding, so the assembler just
has to know how to encode one DSO-local label reference from .eh_frame
to .text.
As a result, it looks like MC will continue to have to know when the
large code model is in use. Perhaps we could invent a '.cfi_startproc
[large]' flag so that this knowledge doesn't need to pollute the
assembler.
Reviewers: davide, lliu0, JDevlieghere
Subscribers: hiraditya, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D50533
llvm-svn: 339397
This patch introduces tablegen class MCStatement.
Currently, an MCStatement can be either a return statement, or a switch
statement.
```
MCStatement:
MCReturnStatement
MCOpcodeSwitchStatement
```
A MCReturnStatement expands to a return statement, and the boolean expression
associated with the return statement is described by a MCInstPredicate.
An MCOpcodeSwitchStatement is a switch statement where the condition is a check
on the machine opcode. It allows the definition of multiple checks, as well as a
default case. More details on the grammar implemented by these two new
constructs can be found in the diff for TargetInstrPredicates.td.
This patch makes it easier to read the body of auto-generated TargetInstrInfo
predicates.
In future, I plan to reuse/extend the MCStatement grammar to describe more
complex target hooks. For now, this is just a first step (mostly a minor
cosmetic change to polish the new predicates framework).
Differential Revision: https://reviews.llvm.org/D50457
llvm-svn: 339352
As discussed on D41794, we have many cases where we fail to combine shuffles as the input operands have other uses.
This patch permits these shuffles to be combined as long as they don't introduce additional variable shuffle masks, which should reduce instruction dependencies and allow the total number of shuffles to still drop without increasing the constant pool.
However, this may mean that some memory folds may no longer occur, and on pre-AVX require the occasional extra register move.
This also exposes some poor PMULDQ/PMULUDQ codegen which was doing unnecessary upper/lower calculations which will in fact fold to zero/undef - the fix will be added in a followup commit.
Differential Revision: https://reviews.llvm.org/D50328
llvm-svn: 339335
According to PTX ISA .volatile has the same memory synchronization
semantics as .relaxed.sys, so it can be used to implement monotonic
atomic loads and stores. This is important for OpenMP's atomic
construct where
- 'read's and 'write's are lowered to atomic loads and stores, and
- an update of float or double types are lowered into a cmpxchg loop.
(Note that PTX could do better because it has atom.add.f{32,64} but
LLVM's atomicrmw instruction only allows integer types.)
Higher levels of atomicity (like acquire and release) need additional
synchronization properties which were added with PTX ISA 6.0 / sm_70.
So using these instructions still results in an error.
Differential Revision: https://reviews.llvm.org/D50391
llvm-svn: 339316
This pseudo-instruction is similar to la but uses PC-relative addressing
unconditionally. This is, la is only different to lla when using -fPIC. This
pseudo-instruction seems often forgotten in several specs but it is definitely
mentioned in binutils opcodes/riscv-opc.c. The semantics are defined both in
page 37 of the "RISC-V Reader" book but also in function macro found in
gas/config/tc-riscv.c.
This is a very first step towards adding PIC support for Linux in the RISC-V
backend.
The lla pseudo-instruction expands to a sequence of auipc + addi with a couple
of pc-rel relocations where the second points to the first one. This is
described in
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#pc-relative-symbol-addresses
For now, this patch only introduces support of that pseudo instruction at the
assembler parser.
Differential Revision: https://reviews.llvm.org/D49661
llvm-svn: 339314
Normally, if any registers are spilled, we prefer to spill lr on Thumb1
so we can fold the "bx lr" into the "pop". However, if there are tail
calls involved, restoring lr is expensive, so skip the optimization in
that case.
The spill of r7 in the new test also isn't necessary, but that's
mostly orthogonal to this patch. (It's the same code in
ARMFrameLowering, but it's not related to tail calls.)
Differential Revision: https://reviews.llvm.org/D49459
llvm-svn: 339283
This patch aims to improve the codegen for vector loads involving the
scalar_to_vector (load X) sequence. Initially, ld->mv instructions were used
for scalar_to_vector (load X), so this patch allows scalar_to_vector (load X)
to utilize:
LXSD and LXSDX for i64 and f64
LXSIWAX for i32 (sign extension to i64)
LXSIWZX for i32 and f64
Committing on behalf of Amy Kwan.
Differential Revision: https://reviews.llvm.org/D48950
llvm-svn: 339260
Match the GNU assembler in supporting immediate operands for these
instructions even when the reg-reg mnemonic is used.
Differential Revision: https://reviews.llvm.org/D50046
Patch by Kito Cheng.
llvm-svn: 339252
Fixup test to check for GCN prefix
These patterns always zero extend the result even though it might need sign extension.
This has been broken since the addition of i16 support.
It has popped up in mad_sat(char) test since min(max()) combination is turned into v_med3, resulting in the following (incorrect) sequence:
v_mad_i16 v2, v10, v9, v11
v_med3_i32 v2, v2, v8, v7
Fixes mad_sat(char) piglit on VI.
Differential Revision: https://reviews.llvm.org/D49836
llvm-svn: 339190
Add missing SIMD types (v2f64) and binary ops. Also adds
tablegen support for automatically prepending prefix byte to SIMD
opcodes.
Differential Revision: https://reviews.llvm.org/D50292
Patch by Thomas Lively
llvm-svn: 339186
Vgather requires must be in a packet with a store, which contradicts
the no-packets feature. As a consequence, gather/scatter could not be
used with no-packets. Relax this, and allow gather packets as exceptions
to the no-packets requirements.
llvm-svn: 339177
Summary:
This patch extends CFGSort pass to support exception handling. Once it
places a loop header, it does not place blocks that are not dominated by
the loop header until all the loop blocks are sorted. This patch extends
the same algorithm to exception 'catch' part, using the information
calculated by WebAssemblyExceptionInfo class.
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D46500
llvm-svn: 339172
Remove the redundant check against zero when updating ProcResourceCounters in
nextGroup(), as pointed out in https://reviews.llvm.org/D50187.
Review: Ulrich Weigand.
llvm-svn: 339139
When potential jump instruction and target are in the same segment, use
jump instruction with immediate field.
In cases where offset does not fit immediate value of a bc/j instructions,
offset is stored into register, and then jump register instruction is used.
Differential Revision: https://reviews.llvm.org/D48019
llvm-svn: 339126
This is necessary to add a VI specific builtin,
__builtin_amdgcn_s_dcache_wb. We already have an
overly specific feature for one of these builtins,
for s_memrealtime. I'm not sure whether it's better
to add more of those, or to get rid of that and merge
it with vi-insts.
Alternatively, maybe this logically goes with scalar-stores?
llvm-svn: 339104
Src0 doesn't really convey any meaning to what the operand is. Passthru matches what's used in the documentation for the intrinsic this comes from.
llvm-svn: 339101
Summary:
Wasm does not have direct counterparts to some of LLVM IR's atomicrmw
instructions (min, max, umin, umax, and nand). This enables atomic
expansion using cmpxchg instruction within a loop for those atomicrmw
instructions.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D49440
llvm-svn: 339084
Summary:
The spec only defines a SIMD expression type of V128 and
leaves interpretation of different vector types to the instructions.
Differential Revision: https://reviews.llvm.org/D50367
Patch by Thomas Lively
llvm-svn: 339082
Everything should quiet, and I think everything should
flush.
I assume the min3/med3/max3 follow the same rules
as regular min/max for flushing, which should at
least be conservatively correct.
There are still more operations that need to
be handled.
llvm-svn: 339065
Not sure why this was checking for denormals for f16.
My interpretation of the IEEE standard is conversions
should produce a canonical result, and the ISA manual
says denormals are created when appropriate.
llvm-svn: 339064
If denormals are enabled, denormals are canonical.
Also fix a few other issues. minnum/maxnum are supposed
to canonicalize. Temporarily improve workaround for the
instruction behavior change in gfx9.
Handle selects and fcopysign.
The tests were also largely broken, since they were
checking for a flush used on some targets after the
store of the result.
llvm-svn: 339061
Summary:
Expand isFNEG so that we generate the appropriate F(N)M(ADD|SUB)
instructions in more cases. For example, the following sequence
a = _mm256_broadcast_ss(f)
d = _mm256_fnmadd_ps(a, b, c)
generates an fsub and fma without this patch and an fnma with this
change.
Reviewers: craig.topper
Subscribers: llvm-commits, davidxl, wmi
Differential Revision: https://reviews.llvm.org/D48467
llvm-svn: 339043
If the store is volatile this might be a memory mapped IO access. In that case we shouldn't generate a load that didn't exist in the source
Differential Revision: https://reviews.llvm.org/D50270
llvm-svn: 339041
Summary:
Ensure that NormalizedBuildVector returns a BUILD_VECTOR with operands of the
same type. This fixes an assertion failure in VerifySDNode.
Reviewers: SjoerdMeijer, t.p.northover, javed.absar
Reviewed By: SjoerdMeijer
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D50202
llvm-svn: 339013
ld64 supplies its own Thumb bit for Thumb functions, and intentionally zeroes
out that part of any addend in an object file. But it only does that for
symbols marked N_EXT -- i.e. external symbols. So LLVM should avoid setting
that extra bit in other cases.
llvm-svn: 339007
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338969
At one point in time acquire implied mayLoad and mayStore as did release. Thus we needed separate pseudos that also carried that property. This appears to no longer be the case. I believe it was changed in 2012 with a comment saying that atomic memory accesses are marked volatile which preserves the ordering.
So from what I can tell we shouldn't need additional pseudos since they aren't carry any flags that are different from the normal instructions. The only thing I can think of is that we may consider them for load folding candidates in the peephole pass now where we didn't before. If that's important hopefully there's something in the memory operand we can check to prevent the folding without relying on pseudo instructions.
Differential Revision: https://reviews.llvm.org/D50212
llvm-svn: 338925
Add a parameter for testing specifically for
sNaNs - at least one instruction pattern on AMDGPU
needs to check specifically for this.
Also handle more cases, and add a target hook
for custom nodes, similar to the hooks for known
bits.
llvm-svn: 338910
Clang uses "ctpop & 1" to implement __builtin_parity. If the popcnt instruction isn't supported this generates a large amount of code to calculate the population count. Instead we can bisect the data down to a single byte using xor and then check the parity flag.
Even when popcnt is supported, its still a good idea to split 64-bit data on 32-bit targets using an xor in front of a single popcnt. Otherwise we get two popcnts and an add before the and.
I've specifically targeted this at the sizes supported by clang builtins, but we could generalize this if we think that's useful.
Differential Revision: https://reviews.llvm.org/D50165
llvm-svn: 338907
Some instructions expand to more than one decoder group.
This has been hitherto ignored, but is handled with this patch.
Review: Ulrich Weigand
https://reviews.llvm.org/D50187
llvm-svn: 338849
There are a lot of permutations of types here generating a lot of patterns in the isel table. It's more efficient to just ReplaceUses and RemoveDeadNode from the Select function.
The test changes are because we have a some shuffle patterns that have a bitcast as their root node. But the behavior is identical to another instruction whose pattern doesn't start with a bitcast. So this isn't a functional change.
llvm-svn: 338824
Move all the patterns to X86InstrVecCompiler.td so we can keep SSE/AVX/AVX512 all in one place.
To save some patterns we'll use an existing DAG combine to convert f128 fand/for/fxor to integer when sse2 is enabled. This allows use to reuse all the existing patterns for v2i64.
I believe this now makes SHA instructions the only case where VEX/EVEX and legacy encoded instructions could be generated simultaneously.
llvm-svn: 338821
If the producing instruction is legacy encoded it doesn't implicitly zero the upper bits. This is important for the SHA instructions which don't have a VEX encoded version. We might also be able to hit this with the incomplete f128 support that hasn't been ported to VEX.
llvm-svn: 338812
I'm assuming the R13 restriction extends to R13D. Guessing this restriction is related to the funny encoding of this register as base always requiring a displacement to be encoded.
llvm-svn: 338806
Summary:
By not reconstructing the operand list of the SDNode, this change makes
it easier to add the forthcoming new tbuffer and buffer intrinsics.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D49995
Change-Id: I0cb79ef0801532645d7dd954a6d7355139db7b38
llvm-svn: 338784
Summary:
I encountered some problems with SIFixWWMLiveness when WWM is in a loop:
1. It sometimes gave invalid MIR where there is some control flow path
to the new implicit use of a register on EXIT_WWM that does not pass
through any def.
2. There were lots of false positives of registers that needed to have
an implicit use added to EXIT_WWM.
3. Adding an implicit use to EXIT_WWM (and adding an implicit def just
before the WWM code, which I tried in order to fix (1)) caused lots
of the values to be spilled and reloaded unnecessarily.
This commit is a rework of SIFixWWMLiveness, with the following changes:
1. Instead of considering any register with a def that can reach the WWM
code and a def that can be reached from the WWM code, it now
considers three specific cases that need to be handled.
2. A register that needs liveness over WWM to be synthesized now has it
done by adding itself as an implicit use to defs other than the
dominant one.
Also added the following fixmes:
FIXME: We should detect whether a register in one of the above
categories is already live at the WWM code before deciding to add the
implicit uses to synthesize its liveness.
FIXME: I believe this whole scheme may be flawed due to the possibility
of the register allocator doing live interval splitting.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46756
Change-Id: Ie7fba0ede0378849181df3f1a9a7a39ed1a94a94
llvm-svn: 338783
Summary:
This fixes a problem where a load from global+idx generated incorrect
code on <=gfx7 when the index is divergent.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47383
Change-Id: Ib4d177d6254b1dd3f8ec0203fdddec94bd8bc5ed
llvm-svn: 338779
This will remove suboptimal branching from the generated ll/sc loops.
The extra simplification pass affects a lot of testcases, which have
been modified to accommodate this change: either by modifying the
test to become immune to the CFG simplification, or (less preferablt)
by adding option -hexagon-initial-cfg-clenaup=0.
llvm-svn: 338774
Rather than allowing invalid bitcasts to be lowered to wasm
call instructions that won't validate, generate wrappers that
contain unreachable thereby delaying the error until runtime.
Differential Revision: https://reviews.llvm.org/D49517
llvm-svn: 338744
These instructions perform the same operation, but the semantic of which operand is destroyed is reversed. If the same register is used as both operands we can change the execution domain without worrying about this difference.
Unfortunately, this really only works in cases where the input register is killed by the instruction. If its not killed, the two address isntruction pass inserts a copy that will become a move instruction. This makes the instruction use different physical registers that contain the same data at the time the unpck/movhlps executes. I've considered using a unary pseudo instruction with tied operand to trick the two address instruction pass. We could then expand the pseudo post regalloc to get the same physical register on both inputs.
Differential Revision: https://reviews.llvm.org/D50157
llvm-svn: 338735
As a part of adding the tiny codemodel, we need to support ldr's with :got:
relocations on them. This seems to be mostly already done, just needs the
relocation type support.
Differential Revision: https://reviews.llvm.org/D50137
llvm-svn: 338673
Adding the FP_ROUND nodes when combining FP_TO_[SU]INT of elements
feeding a BUILD_VECTOR into an FP_TO_[SU]INT of the built vector
loses precision. This patch removes the code that adds these nodes
to true f64 operands. It also adds patterns required to ensure
the code is still vectorized rather than converting individual
elements and inserting into a vector.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38342
Differential Revision: https://reviews.llvm.org/D50121
llvm-svn: 338658
AArch64 ELF ABI does not define a static relocation type for TLS offset within
a module, which makes it impossible for compiler to generate a valid
DW_AT_location content for thread local variables. Currently LLVM generates an
invalid R_AARCH64_ABS64 relocation at the DW_AT_location field for a TLS
variable. That causes trouble for linker because thread local variable does
not have an absolute address at link time. AArch64 GCC solves the problem by
not generating DW_AT_location for thread local variables. We should do the
same in LLVM.
Differential Revision: https://reviews.llvm.org/D43860
llvm-svn: 338655
Mutate the node type during selection when it
doesn't matter. This avoids an intermediate bitcast
node on targets with legal i16/f16.
Also fixes missing output modifiers on v_cvt_pkrtz_f32_f16,
which I assume are OK.
llvm-svn: 338619
We now emit a move of -1 before the cmov and do the addition after the cmov just like the case with an extra addition.
This may be slightly worse for code size, but is more consistent with other compilers. And we might be able to hoist the mov -1 outside of loops.
llvm-svn: 338613
Summary:
D25878, which added support for !absolute_symbol for normal X86 ISel,
did not add support for materializing references to absolute symbols for
X86 FastISel. This causes build failures because FastISel generates
PC-relative relocations for absolute symbols. Fall back to normal ISel
for references to !absolute_symbol GVs. Fix for PR38200.
Reviewers: pcc, craig.topper
Reviewed By: pcc
Subscribers: hiraditya, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D50116
llvm-svn: 338599
There is nothing x86-specific about this code, so it'd be nice to make this available for other targets to use in the future (and get it out of X86ISelLowering!).
Differential Revision: https://reviews.llvm.org/D50083
llvm-svn: 338586
Summary:
Add _L to _LZ image intrinsic table mapping to table gen.
In ISelLowering check if image intrinsic has lod and if it's equal
to zero, if so remove lod and change opcode to equivalent mapped _LZ.
Change-Id: Ie24cd7e788e2195d846c7bd256151178cbb9ec71
Subscribers: arsenm, mehdi_amini, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49483
llvm-svn: 338523
The DAG combiner logic to simplify AND masks in shift counts is invalid.
While it is true that the SystemZ shift instructions ignore all but the
low 6 bits of the shift count, it is still invalid to simplify the AND
masks while the DAG still uses the standard shift operators (which are
*not* defined to match the SystemZ instruction behavior).
Instead, this patch performs equivalent operations during instruction
selection. For completely removing the AND, this now happens via
additional DAG match patterns implemented by a multi-alternative
PatFrags. For simplifying a 32-bit AND to a 16-bit AND, the existing DAG
patterns were already mostly OK, they just needed an output XForm to
actually truncate the immediate value.
Unfortunately, the latter change also exposed a bug in TableGen: it
seems XForms are currently only handled correctly for direct operands of
the outermost operation node. This patch also fixes that bug by simply
recurring through the whole pattern. This should be NFC for all other
targets.
Differential Revision: https://reviews.llvm.org/D50096
llvm-svn: 338521
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338494
It's not strictly required by the transform of the cmov and the add, but it makes sure we restrict it to the cases we know we want to match.
While there canonicalize the operand order of the cmov to simplify the matching and emitting code.
llvm-svn: 338492
EFLAGS copy lowering.
If you have a branch of LLVM, you may want to cherrypick this. It is
extremely unlikely to hit this case empirically, but it will likely
manifest as an "impossible" branch being taken somewhere, and will be
... very hard to debug.
Hitting this requires complex conditions living across complex control
flow combined with some interesting memory (non-stack) initialized with
the results of a comparison. Also, because you have to arrange for an
EFLAGS copy to be in *just* the right place, almost anything you do to
the code will hide the bug. I was unable to reduce anything remotely
resembling a "good" test case from the place where I hit it, and so
instead I have constructed synthetic MIR testing that directly exercises
the bug in question (as well as the good behavior for completeness).
The issue is that we would mistakenly assume any SETcc with a valid
condition and an initial operand that was a register and a virtual
register at that to be a register *defining* SETcc...
It isn't though....
This would in turn cause us to test some other bizarre register,
typically the base pointer of some memory. Now, testing this register
and using that to branch on doesn't make any sense. It even fails the
machine verifier (if you are running it) due to the wrong register
class. But it will make it through LLVM, assemble, and it *looks*
fine... But wow do you get a very unsual and surprising branch taken in
your actual code.
The fix is to actually check what kind of SETcc instruction we're
dealing with. Because there are a bunch of them, I just test the
may-store bit in the instruction. I've also added an assert for sanity
that ensure we are, in fact, *defining* the register operand. =D
llvm-svn: 338481
Disable ARMCodeGenPrepare by default again. It is causing verifier
failues in V8 that look like:
Duplicate integer as switch case
switch i32 %trunc, label %if.end13 [
i32 0, label %cleanup36
i32 0, label %if.then8
], !dbg !4981
i32 0
fatal error: error in backend: Broken function found, compilation aborted!
I will continue reducing the test case and send it along.
llvm-svn: 338452
When lowering calling conventions, prefer to decompose vectors
into the constitute register types. This avoids artifical constraints
to satisfy a wide super-register.
This improves code quality because now optimizations don't need to
deal with the super-register constraint. For example the immediate
folding code doesn't deal with 4 component reg_sequences, so by
breaking the register down earlier the existing immediate folding
code is able to work.
This also avoids the need for the shader input processing code
to manually split vector types.
llvm-svn: 338416
Don't declare them as X86SchedWritePair when the folded class will never be used.
Note: MOVBE (load/store endian conversion) instructions tend to have a very different behaviour to BSWAP.
llvm-svn: 338412
As was done for vector rotations, we can efficiently use ISD::MULHU for vXi8/vXi16 ISD::SRL lowering.
Shift-by-zero cases are still problematic (mainly on v32i8 due to extra AND/ANDN/OR or VPBLENDVB blend masks but v8i16/v16i16 aren't great either if PBLENDW fails) so I've limited this first patch to known non-zero cases if we can't easily use PBLENDW.
Differential Revision: https://reviews.llvm.org/D49562
llvm-svn: 338407
Summary:
Similar to D49636, but for PMADDUBSW. This instruction has the additional complexity that the addition of the two products saturates to 16-bits rather than wrapping around. And one operand is treated as signed and the other as unsigned.
A C example that triggers this pattern
```
static const int N = 128;
int8_t A[2*N];
uint8_t B[2*N];
int16_t C[N];
void foo() {
for (int i = 0; i != N; ++i)
C[i] = MIN(MAX((int16_t)A[2*i]*(int16_t)B[2*i] + (int16_t)A[2*i+1]*(int16_t)B[2*i+1], -32768), 32767);
}
```
Reviewers: RKSimon, spatel, zvi
Reviewed By: RKSimon, zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49829
llvm-svn: 338402
This commit fixes two issues with the liveness information after the
call:
1) The code always spills RCX and RDX if InProlog == true, which results
in an use of undefined phys reg.
2) FinalReg, JoinReg, RoundedReg, SizeReg are not added as live-ins to
the basic blocks that use them, therefore they are seen undefined.
https://llvm.org/PR38376
Differential Revision: https://reviews.llvm.org/D50020
llvm-svn: 338400
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
We could choose a free 0 for this, but this
matches the behavior for fmul undef, 1.0. Also,
the NaN use is more useful for folding use operations
although if it's not eliminated it is more expensive
in terms of code size.
llvm-svn: 338376
This patch teaches llvm-mca how to identify dependency breaking instructions on
btver2.
An example of dependency breaking instructions is the zero-idiom XOR (example:
`XOR %eax, %eax`), which always generates zero regardless of the actual value of
the input register operands.
Dependency breaking instructions don't have to wait on their input register
operands before executing. This is because the computation is not dependent on
the inputs.
Not all dependency breaking idioms are also zero-latency instructions. For
example, `CMPEQ %xmm1, %xmm1` is independent on
the value of XMM1, and it generates a vector of all-ones.
That instruction is not eliminated at register renaming stage, and its opcode is
issued to a pipeline for execution. So, the latency is not zero.
This patch adds a new method named isDependencyBreaking() to the MCInstrAnalysis
interface. That method takes as input an instruction (i.e. MCInst) and a
MCSubtargetInfo.
The default implementation of isDependencyBreaking() conservatively returns
false for all instructions. Targets may override the default behavior for
specific CPUs, and return a value which better matches the subtarget behavior.
In future, we should teach to Tablegen how to automatically generate the body of
isDependencyBreaking from scheduling predicate definitions. This would allow us
to expose the knowledge about dependency breaking instructions to the machine
schedulers (and, potentially, other codegen passes).
Differential Revision: https://reviews.llvm.org/D49310
llvm-svn: 338372
Since z13, the max group size will be 2 if any μop has more than 3 register
sources.
This has been ignored sofar in the SystemZHazardRecognizer, but is now
handled by recognizing those instructions and adjusting the tracking of
decoding and the cost heuristic for grouping.
Review: Ulrich Weigand
https://reviews.llvm.org/D49847
llvm-svn: 338368
isFNEG was duplicating much of what was done by getTargetConstantBitsFromNode in its own calls to getTargetConstantFromNode.
Noticed while reviewing D48467.
llvm-svn: 338358
Contrary to ELF, we don't add any markers that distinguish data generated
with .short/.long from normal instructions, so the .inst directive only
adds compatibility with assembly that uses it.
Differential Revision: https://reviews.llvm.org/D49936
llvm-svn: 338356
Contrary to ELF, we don't add any markers that distinguish data generated
with .long from normal instructions, so the .inst directive only adds
compatibility with assembly that uses it.
Differential Revision: https://reviews.llvm.org/D49935
llvm-svn: 338355
In one place we checked X86Subtarget.slowLEA() to decide if the pass should run. But to decide what the pass should we only check isSLM. This resulted in Goldmont going down the Bonnell path.
llvm-svn: 338342
Also refactors some existing code to materialize addresses for the large code
model so it can be shared between G_GLOBAL_VALUE and G_BLOCK_ADDR.
This implements PR36390.
Differential Revision: https://reviews.llvm.org/D49903
llvm-svn: 338337
The vector contains the SDNodes that these functions create. The number of nodes is always a small number so we should use SmallVector to avoid a heap allocation.
llvm-svn: 338329
This teaches the outliner to save LR to a register rather than the stack when
possible. This allows us to avoid bumping the stack in outlined functions in
some cases. By doing this, in a later patch, we can teach the outliner to do
something like this:
f1:
...
bl OUTLINED_FUNCTION
...
f2:
...
move LR's contents to a register
bl OUTLINED_FUNCTION
move the register's contents back
instead of falling back to saving LR in both cases.
llvm-svn: 338278
This patch enables instructions that are destructive on their
destination- and first source operand, to be prefixed with a
MOVPRFX instruction.
This patch also adds a variety of tests:
- positive tests for all instructions and forms that accept a
movprfx for either or both predicated and unpredicated forms.
- negative tests for all instructions and forms that do not accept
an unpredicated or predicated movprfx.
- negative tests for the diagnostics that get emitted when a MOVPRFX
instruction is used incorrectly.
This is patch [2/2] in a series to add MOVPRFX instructions:
- Patch [1/2]: https://reviews.llvm.org/D49592
- Patch [2/2]: https://reviews.llvm.org/D49593
Reviewers: rengolin, SjoerdMeijer, samparker, fhahn, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D49593
llvm-svn: 338261
This patch adds predicated and unpredicated MOVPRFX instructions, which
can be prepended to SVE instructions that are destructive on their first
source operand, to make them a constructive operation, e.g.
add z1.s, p0/m, z1.s, z2.s <=> z1 = z1 + z2
can be made constructive:
movprfx z0, z1
add z0.s, p0/m, z0.s, z2.s <=> z0 = z1 + z2
The predicated MOVPRFX instruction can additionally be used to zero
inactive elements, e.g.
movprfx z0.s, p0/z, z1.s
add z0.s, p0/m, z0.s, z2.s
Not all instructions can be prefixed with the MOVPRFX instruction
which is why this patch also adds a mechanism to validate prefixed
instructions. The exact rules when a MOVPRFX applies is detailed in
the SVE supplement of the Architectural Reference Manual.
This is patch [1/2] in a series to add MOVPRFX instructions:
- Patch [1/2]: https://reviews.llvm.org/D49592
- Patch [2/2]: https://reviews.llvm.org/D49593
Reviewers: rengolin, SjoerdMeijer, samparker, fhahn, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D49592
llvm-svn: 338258
The machine verifier asserts with:
Assertion failed: (isMBB() && "Wrong MachineOperand accessor"), function getMBB, file ../include/llvm/CodeGen/MachineOperand.h, line 542.
It calls analyzeBranch which tries to call getMBB if the opcode is
JMP_1, but in this case we do:
JMP_1 @OUTLINED_FUNCTION
I believe we have to use TAILJMPd64 instead of JMP_1 since JMP_1 is used
with brtarget8.
Differential Revision: https://reviews.llvm.org/D49299
llvm-svn: 338237
Summary:
These instructions interact with hardware blocks outside the shader core,
and they can have "scalar" side effects even when EXEC = 0. We don't
want these scalar side effects to occur when all lanes want to skip
these instructions, so always add the execz skip branch instruction
for basic blocks that contain them.
Also ensure that we skip scalar stores / atomics, though we don't
code-gen those yet.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48431
Change-Id: Ieaeb58352e2789ffd64745603c14970c60819d44
llvm-svn: 338235
Code in `CC_ARM_AAPCS_Custom_Aggregate()` is responsible for handling
homogeneous aggregates for `CC_ARM_AAPCS_VFP`. When an aggregate ends up
fully on stack, the function tries to pack all resulting items of the
aggregate as tightly as possible according to AAPCS.
Once the first item was laid out, the alignment used for consecutive
items was the size of one item. This logic went wrong for 128-bit
vectors because their alignment is normally only 64 bits, and so could
result in inserting unexpected padding between the first and second
element.
The patch fixes the problem by updating the alignment with the item size
only if this results in reducing it.
Differential Revision: https://reviews.llvm.org/D49720
llvm-svn: 338233
The WHILE instructions generate a predicate that is true while the
comparison of the first scalar operand (incremented for each predicate
element) with the second scalar operand is true and false thereafter.
WHILELE While incrementing signed scalar less than or equal to scalar
WHILELO While incrementing unsigned scalar lower than scalar
WHILELS While incrementing unsigned scalar lower than or same as scalar
WHILELT While incrementing signed scalar less than scalar
e.g.
whilele p0.s, x0, x1
generates predicate p0 (for 32bit elements) by incrementing
(signed) x0 and comparing that vector to splat(x1).
llvm-svn: 338211
The instructions added in this patch permit active elements within
a vector to be processed sequentially without unpacking the vector.
PFIRST Set the first active element to true.
PNEXT Find next active element in predicate.
CTERMEQ Compare and terminate loop when equal.
CTERMNE Compare and terminate loop when not equal.
llvm-svn: 338210
X86 normally requires immediates to be a signed 32-bit value which would exclude i64 0x80000000. But for add/sub we can negate the constant and use the opposite instruction.
llvm-svn: 338204
This patch adds PFALSE (unconditionally sets all elements of
the predicate to false) and PTEST (set the status flags for the
predicate).
llvm-svn: 338198
SelectionDAGBuilder widens v3i32/v3f32 arguments to
to v4i32/v4f32 which consume an additional register.
In addition to wasting argument space, this produces extra
instructions since now it appears the 4th vector component has
a meaningful value to most combines.
llvm-svn: 338197
This patch adds support for instructions that partition a predicate
based on data-dependent termination conditions in a loop.
BRKA Break after the first true condition
BRKAS Break after the first true condition, setting condition flags
BRKB Break before the first true condition
BRKBS Break before the first true condition, setting condition flags
BRKPA Break after the first true condition, propagating from the
previous partition
BRKPAS Break after the first true condition, propagating from the
previous partition, setting condition flags
BRKPB Break before the first true condition, propagating from the
previous partition
BRKPBS Break before the first true condition, propagating from the
previous partition, setting condition flags
BRKN Propagate break to next partition
BKRNS Propagate break to next partition, setting condition flags
llvm-svn: 338196
Summary:
Moved Explicit Locals pass to last.
Made that pass obligatory.
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D49160
llvm-svn: 338164
Fixed the ASAN failure from before in r338148, so recommiting.
This patch enables the MachineOutliner by default in AArch64 under -Oz.
The MachineOutliner offers around a 4.5% improvement on the current -Oz code
size improvements.
We have done work into improving the debuggability of outlined code, so that
users of -Oz won't be surprised by the optimization. We have also been executing
the LLVM test suite and common external tests such as the SPEC suites
continuously with no issue. The outliner has a low compile-time overhead of
roughly 1%. At this point, the outliner would be a really good addition to the
-Oz pass pipeline!
llvm-svn: 338160
There was a missing check for if a candidate list was entirely deleted. This
adds that check.
This fixes an asan failure caused by running test/CodeGen/AArch64/addsub_ext.ll
with the MachineOutliner enabled.
llvm-svn: 338148
This feature enables the fusion of such operations on Cortex A57 and Cortex
A72, as recommended in their Software Optimisation Guides, sections 4.14 and
4.11, respectively.
Differential revision: https://reviews.llvm.org/D49563
llvm-svn: 338147
Errors like the following are reported by:
https://urldefense.proofpoint.com/v2/url?u=http-3A__lab.llvm.org-3A8011_builders_llvm-2Dclang-2Dx86-5F64-2Dexpensive-2Dchecks-2Dwin_builds_11261&d=DwIBAg&c=5VD0RTtNlTh3ycd41b3MUw&r=DA8e1B5r073vIqRrFz7MRA&m=929oWPCf7Bf2qQnir4GBtowB8ZAlIRWsAdTfRkDaK-g&s=9k-wbEUVpUm474hhzsmAO29VXVvbxJPWD9RTgCD71fQ&e=
*** Bad machine code: Explicit definition marked as use ***
- function: cal_align1
- basic block: %bb.0 entry (0x47edd98)
- instruction: LDB $r3, $r2, 0
- operand 0: $r3
This is because RegState info was missing for ScratchReg inside
expandMEMCPY. This caused incomplete register usage information to
MachineInstr verifier which then would complain as there could be potential
code-gen issue if the complained MachineInstr is used in place where
register usage information matters even though the memcpy expanding is not
in such case as it happens at the last stage of IR optimization pipeline.
We should always specify those register usage information which compiler
couldn't deduct automatically whenever we add a hardware register manually.
Reported-by: Builder llvm-clang-x86_64-expensive-checks-win Build #11261
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 338134
This patch enables the MachineOutliner by default in AArch64 under -Oz.
The MachineOutliner offers around a 4.5% improvement on the current -Oz code
size improvements.
We have done work into improving the debuggability of outlined code, so that
users of -Oz won't be surprised by the optimization. We have also been executing
the LLVM test suite and common external tests such as the SPEC suites
continuously with no issue. The outliner has a low compile-time overhead of
roughly 1%. At this point, the outliner would be a really good addition to the
-Oz pass pipeline!
llvm-svn: 338133
R600 can't handle immediates for BFE, these will be eliminated later.
Fixes powr/pow regressions n r600 since r334817
Differential Revision: https://reviews.llvm.org/D49641
llvm-svn: 338127
This patch adds support for various integer reduction operations:
SADDV signed add reduction to scalar
UADDV unsigned add reduction to scalar
SMAXV signed maximum reduction to scalar
SMINV signed minimum reduction to scalar
UMAXV unsigned maximum reduction to scalar
UMINV unsigned minimum reduction to scalar
ANDV logical AND reduction to scalar
ORV logical OR reduction to scalar
EORV logical EOR reduction to scalar
The reduction is predicated, e.g.
smaxv s0, p0, z1.s
performs a signed maximum reduction on active elements in z1,
and stores the (signed max value) result in s0.
llvm-svn: 338126
This patch adds support for various floating-point
reduction operations:
FADDA strictly-ordered add reduction, accumulating in scalar
FADDV recursive add reduction to scalar
FMAXV recursive max reduction to scalar
FMINV recursive min reduction to scalar
FMAXNMV recursive max number reduction to scalar
FMINNMV recursive min number reduction to scalar
The reduction is predicated, e.g.
fadda d0, p0, d0, z1.d
performs the add-reduction in strict order on active elements
in z1, accumulating into d0.
faddv d0, p0, z1.d
performs the add-reduction (not in strict order)
on active elements in z1, storing the result in d0.
llvm-svn: 338123
This patch adds support for transcendental acceleration
instructions 'FEXPA' (exponential accelerator) and 'FTSSEL'
(trigonometric select coefficient).
llvm-svn: 338121
Not sure why they were being explicitly excluded, but I believe all the math inside the if works. I changed the absolute value to be uint64_t instead of int64_t so INT64_MIN+1 wouldn't be signed wrap.
llvm-svn: 338101
Summary:
This is the pattern you get from the loop vectorizer for something like this
int16_t A[1024];
int16_t B[1024];
int32_t C[512];
void pmaddwd() {
for (int i = 0; i != 512; ++i)
C[i] = (A[2*i]*B[2*i]) + (A[2*i+1]*B[2*i+1]);
}
In this case we will have (add (mul (build_vector), (build_vector)), (mul (build_vector), (build_vector))). This is different than the pattern we currently match which has the build_vectors between an add and a single multiply. I'm not sure what C code would get you that pattern.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49636
llvm-svn: 338097
If this happens the operands aren't updated and the existing node is returned. Make sure we pass this existing node up to the DAG combiner so that a proper replacement happens. Otherwise we get stuck in an infinite loop with an unoptimized node.
llvm-svn: 338090
Scale the offset of VGPR spills by the wave size when it cannot fit in the
12-bit offset immediate field and so is added to the soffset SGPR. This
accounts for hardware swizzling of scratch memory.
Differential Revision: https://reviews.llvm.org/D49448
llvm-svn: 338060
- Save/restore only registers that are used.
This includes Callee saved registers and Caller saved registers
(arguments and temporaries) for integer and FP registers.
- If there is a call in the interrupt handler, save/restore all
Caller saved registers (arguments and temporaries) and all FP registers.
- Emit special return instructions depending on "interrupt"
attribute type.
Based on initial patch by Zhaoshi Zheng.
Reviewers: asb
Reviewed By: asb
Subscribers: rkruppe, the_o, MartinMosbeck, brucehoult, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D48411
llvm-svn: 338047
Summary:
NVPTX target dos not use register-based frame information. Instead it
relies on the artificial local_depot that is used instead of the frame
and the data for variables must be emitted relatively to this
local_depot.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45963
llvm-svn: 338039
- Some of the v8.3 pointer authentication instruction inhabit the Hint space
- These instructions can be assembled to hint instructions which act as NOP instructions prior to v8.3
- This patch permits using the hint instructions for all v8a targets
- Also, correct the RETA{A,B} instructions to match the instruction attributes of RET (set isTerminator and isBarrier)
Differential Revision: https://reviews.llvm.org/D49786
llvm-svn: 338029
Override getTypeForExtReturn so that functions returning
an i32 typed value have it sign extended on MIPS64.
Also provide patterns to get rid of unneeded sign extensions
for arithmetic instructions which implicitly sign extend
their results.
Differential Revision: https://reviews.llvm.org/D48374
llvm-svn: 338019
a helper function with a nice overview comment. NFC.
This is a preperatory refactoring to implementing another component of
mitigation here that was descibed in the design document but hadn't been
implemented yet.
llvm-svn: 338016
This adds MC support for the crypto instructions that were made optional
extensions in Armv8.2-A (AArch64 only).
Differential Revision: https://reviews.llvm.org/D49370
llvm-svn: 338010
I'm not sure if this was trying to avoid optimizing the new nodes further or what. Or maybe to prevent a cycle if something tried to reform the multiply? But I don't think its a reliable way to do that. If the user of the expanded multiply is visited by the DAGCombiner after this conversion happens, the DAGCombiner will check its operands, see that they haven't been visited by the DAGCombiner before and it will then add the first node to the worklist. This process will repeat until all the new nodes are visited.
So this seems like an unreliable prevention at best. So this patch just returns the new nodes like any other combine. If this starts causing problems we can try to add target specific nodes or something to more directly prevent optimizations.
Now that we handle the combine normally, we can combine any negates the mul expansion creates into their users since those will be visited now.
llvm-svn: 338007
These calls were making sure some newly created nodes were added to worklist, but the DAGCombiner has internal support for ensuring it has visited all nodes. Any time it visits a node it ensures the operands have been queued to be visited as well. This means if we only need to return the last new node. The DAGCombiner will take care of adding its inputs thus walking backwards through all the new nodes.
llvm-svn: 337996
- Avoid duplication of regmask size calculation.
- Simplify allocateRegisterMask() call.
- Rename allocateRegisterMask() to allocateRegMask() to be consistent
with naming in MachineOperand.
llvm-svn: 337986
Some BPF JIT backends would want to optimize memcpy in their own
architecture specific way.
However, at the moment, there is no way for JIT backends to see memcpy
semantics in a reliable way. This is due to LLVM BPF backend is expanding
memcpy into load/store sequences and could possibly schedule them apart from
each other further. So, BPF JIT backends inside kernel can't reliably
recognize memcpy semantics by peephole BPF sequence.
This patch introduce new intrinsic expand infrastructure to memcpy.
To get stable in-order load/store sequence from memcpy, we first lower
memcpy into BPF::MEMCPY node which then expanded into in-order load/store
sequences in expandPostRAPseudo pass which will happen after instruction
scheduling. By this way, kernel JIT backends could reliably recognize
memcpy through scanning BPF sequence.
This new memcpy expand infrastructure is gated by a new option:
-bpf-expand-memcpy-in-order
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 337977
In SVN r334523, the first half of comdat constant pool handling was
hoisted from X86WindowsTargetObjectFile (which despite the name only
was used for msvc targets) into the arch independent
TargetLoweringObjectFileCOFF, but the other half of the handling was
left behind in X86AsmPrinter::GetCPISymbol.
With only half of the handling in place, inconsistent comdat
sections/symbols are created, causing issues with both GNU binutils
(avoided for X86 in SVN r335918) and with the MS linker, which
would complain like this:
fatal error LNK1143: invalid or corrupt file: no symbol for COMDAT section 0x4
Differential Revision: https://reviews.llvm.org/D49644
llvm-svn: 337950
Saves materializing the immediate for the "ands".
Corresponding patterns exist for lsrs+lsls, but that seems less common
in practice.
Now implemented as a DAGCombine.
Differential Revision: https://reviews.llvm.org/D49585
llvm-svn: 337945
For example v = <2 x i1> is represented as bbbbaaaa in a predicate register,
where b = v[1], a = v[0]. Extracting v[1] is equivalent to extracting bit 4
from the predicate register.
llvm-svn: 337934
Add support for lowering pointer arguments.
Changing type from pointer to integer is already done in
MipsTargetLowering::getRegisterTypeForCallingConv.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D49419
llvm-svn: 337912
NFC changes to make scheduler TableGen files more readable, by using loops
instead of a lot of similar defs with just e.g. a latency value that changes.
https://reviews.llvm.org/D49598
Review: Ulrich Weigand, Javed Abshar
llvm-svn: 337909
code.
This consolidates all our hardening calls, and simplifies the code
a bit. It seems much more clear to handle all of these together.
No functionality changed here.
llvm-svn: 337895
This function actually does two things: it traces the predicate state
through each of the basic blocks in the function (as that isn't directly
handled by the SSA updater) *and* it hardens everything necessary in the
block as it goes. These need to be done together so that we have the
currently active predicate state to use at each point of the hardening.
However, this also made obvious that the flag to disable actual
hardening of loads was flawed -- it also disabled tracing the predicate
state across function calls within the body of each block. So this patch
sinks this debugging flag test to correctly guard just the hardening of
loads.
Unless load hardening was disabled, no functionality should change with
tis patch.
llvm-svn: 337894
The target independent AsmParser doesn't recognise .hword, .word, .dword
which are required for Mips. Currently MipsAsmParser recognises these
through dispatch to MipsAsmParser::parseDataDirective. This contains
equivalent logic to AsmParser::parseDirectiveValue. This patch allows
reuse of AsmParser::parseDirectiveValue by making use of
addAliasForDirective to support .hword, .word and .dword.
Original patch provided by Alex Bradbury at D47001 was modified to fix
handling of microMIPS symbols. The `AsmParser::parseDirectiveValue`
calls either `EmitIntValue` or `EmitValue`. In this patch we override
`EmitIntValue` in the `MipsELFStreamer` to clear a pending set of
microMIPS symbols.
Differential revision: https://reviews.llvm.org/D49539
llvm-svn: 337893
against v1.2 BCBS attacks directly.
Attacks using spectre v1.2 (a subset of BCBS) are described in the paper
here:
https://people.csail.mit.edu/vlk/spectre11.pdf
The core idea is to speculatively store over the address in a vtable,
jumptable, or other target of indirect control flow that will be
subsequently loaded. Speculative execution after such a store can
forward the stored value to subsequent loads, and if called or jumped
to, the speculative execution will be steered to this potentially
attacker controlled address.
Up until now, this could be mitigated by enableing retpolines. However,
that is a relatively expensive technique to mitigate this particular
flavor. Especially because in most cases SLH will have already mitigated
this. To fully mitigate this with SLH, we need to do two core things:
1) Unfold loads from calls and jumps, allowing the loads to be post-load
hardened.
2) Force hardening of incoming registers even if we didn't end up
needing to harden the load itself.
The reason we need to do these two things is because hardening calls and
jumps from this particular variant is importantly different from
hardening against leak of secret data. Because the "bad" data here isn't
a secret, but in fact speculatively stored by the attacker, it may be
loaded from any address, regardless of whether it is read-only memory,
mapped memory, or a "hardened" address. The only 100% effective way to
harden these instructions is to harden the their operand itself. But to
the extent possible, we'd like to take advantage of all the other
hardening going on, we just need a fallback in case none of that
happened to cover the particular input to the control transfer
instruction.
For users of SLH, currently they are paing 2% to 6% performance overhead
for retpolines, but this mechanism is expected to be substantially
cheaper. However, it is worth reminding folks that this does not
mitigate all of the things retpolines do -- most notably, variant #2 is
not in *any way* mitigated by this technique. So users of SLH may still
want to enable retpolines, and the implementation is carefuly designed to
gracefully leverage retpolines to avoid the need for further hardening
here when they are enabled.
Differential Revision: https://reviews.llvm.org/D49663
llvm-svn: 337878
We generated a subtract for the power of 2 minus one then negated the result. The negate can be optimized away by swapping the subtract operands, but DAG combine doesn't know how to do that and we don't add any of the new nodes to the worklist anyway.
This patch makes use explicitly emit the swapped subtract.
llvm-svn: 337858
Use a left shift and 2 subtracts like we do for 30. Move this out from behind the slow lea check since it doesn't even use an LEA.
Use this for multiply by 14 as well.
llvm-svn: 337856
Just some gardening here.
Similar to how we moved call information into Candidates, this moves outlined
frame information into OutlinedFunction. This allows us to remove
TargetCostInfo entirely.
Anywhere where we returned a TargetCostInfo struct, we now return an
OutlinedFunction. This establishes OutlinedFunctions as more of a general
repeated sequence, and Candidates as occurrences of those repeated sequences.
llvm-svn: 337848
When building with LTO, builtin functions that are defined but whose calls have not been inserted yet, get internalized. The Global Dead Code Elimination phase in the new LTO implementation then removes these function definitions. Later optimizations add calls to those functions, and the linker then dies complaining that there are no definitions. This CL fixes the new LTO implementation to check if a function is builtin, and if so, to not internalize (and later DCE) the function. As part of this fix I needed to move the RuntimeLibcalls.{def,h} files from the CodeGen subidrectory to the IR subdirectory. I have updated all the files that accessed those two files to access their new location.
Fixes PR34169
Patch by Caroline Tice!
Differential Revision: https://reviews.llvm.org/D49434
llvm-svn: 337847
Summary:
Enabling this fully exposes a latent bug in the instruction folding: we
never update the register constraints for the register operands when
fusing a load into another operation. The fused form could, in theory,
have different register constraints on its operands. And in fact,
TCRETURNm* needs its memory operands to use tailcall compatible
registers.
I've updated the folding code to re-constrain all the registers after
they are mapped onto their new instruction.
However, we still can't enable folding in the general case from
TCRETURNr* to TCRETURNm* because doing so may require more registers to
be available during the tail call. If the call itself uses all but one
register, and the folded load would require both a base and index
register, there will not be enough registers to allocate the tail call.
It would be better, IMO, to teach the register allocator to *unfold*
TCRETURNm* when it runs out of registers (or specifically check the
number of registers available during the TCRETURNr*) but I'm not going
to try and solve that for now. Instead, I've just blocked the forward
folding from r -> m, leaving LLVM free to unfold from m -> r as that
doesn't introduce new register pressure constraints.
The down side is that I don't have anything that will directly exercise
this. Instead, I will be immediately using this it my SLH patch. =/
Still worse, without allowing the TCRETURNr* -> TCRETURNm* fold, I don't
have any tests that demonstrate the failure to update the memory operand
register constraints. This patch still seems correct, but I'm nervous
about the degree of testing due to this.
Suggestions?
Reviewers: craig.topper
Subscribers: sanjoy, mcrosier, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D49717
llvm-svn: 337845
Before this, TCI contained all the call information for each Candidate.
This moves that information onto the Candidates. As a result, each Candidate
can now supply how it ought to be called. Thus, Candidates will be able to,
say, call the same function in cheaper ways when possible. This also removes
that information from TCI, since it's no longer used there.
A follow-up patch for the AArch64 outliner will demonstrate this.
llvm-svn: 337840
For the final DTPREL addition, rather than a lui/daddiu/daddu triple,
LLVM was erronously emitting a daddiu/daddiu pair, treating the %dtprel_hi
as if it were a %dtprel_lo, since Mips::Hi expands unshifted for Sym64.
Instead, use a new TlsHi node and, although unnecessary due to the exact
structure of the nodes emitted, use TlsHi for local exec too to prevent
future bugs. Also garbage-collect the unused TprelLo and TlsGd nodes,
and TprelHi since its functionality is provided by the new common TlsHi node.
Patch by James Clarke.
Differential revision: https://reviews.llvm.org/D49259
llvm-svn: 337827
helper and restructure the post-load hardening to use this.
This isn't as trivial as I would have liked because the post-load
hardening used a trick that only works for it where it swapped in
a temporary register to the load rather than replacing anything.
However, there is a simple way to do this without that trick that allows
this to easily reuse a friendly API for hardening a value in a register.
That API will in turn be usable in subsequent patcehs.
This also techincally changes the position at which we insert the subreg
extraction for the predicate state, but that never resulted in an actual
instruction and so tests don't change at all.
llvm-svn: 337825
ARM Stage 2 builders have been suspiciously broken since the pass was
committed. Disabling to hopefully fix the bots and give me time to
debug.
llvm-svn: 337821
Matt Arsenault