Building a vector out of multiple loads can be converted to a load of the vector type if the loads are consecutive.
But the special condition is that the element number is 1, such as <1 x i128>. So just early exit to fix the assert.
Patch By: wuzish (Zixuan Wu)
Differential Revision: https://reviews.llvm.org/D52072
llvm-svn: 342611
Summary:
This change leaves holes in the opcode space where missing
instructions could logically be added later if they were found to be
useful.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52282
llvm-svn: 342610
Enable enableMultipleCopyHints() on X86.
Original Patch by @jonpa:
While enabling the mischeduler for SystemZ, it was discovered that for some reason a test needed one extra seemingly needless COPY (test/CodeGen/SystemZ/call-03.ll). The handling for that is resulted in this patch, which improves the register coalescing by providing not just one copy hint, but a sorted list of copy hints. On SystemZ, this gives ~12500 less register moves on SPEC, as well as marginally less spilling.
Instead of improving just the SystemZ backend, the improvement has been implemented in common-code (calculateSpillWeightAndHint(). This gives a lot of test failures, but since this should be a general improvement I hope that the involved targets will help and review the test updates.
Differential Revision: https://reviews.llvm.org/D38128
llvm-svn: 342578
As the code comments suggest, these are about splitting, and they
are not necessarily limited to lowering, so that misled me.
There's nothing that's actually x86-specific in these either, so
they might be better placed in a common header so any target can
use them.
llvm-svn: 342575
The patch extends size reduction pass for MicroMIPS. Two MOVE
instructions are transformed into one MOVEP instrucition.
Patch by Milena Vujosevic Janicic.
Differential revision: https://reviews.llvm.org/D52037
llvm-svn: 342572
The patch fixes definition of MOVEP instruction. Two registers are used
instead of register pairs. This is necessary as machine verifier cannot
handle register pairs.
Patch by Milena Vujosevic Janicic.
Differential revision: https://reviews.llvm.org/D52035
llvm-svn: 342571
This patch adds an initial x86 SimplifyDemandedVectorEltsForTargetNode implementation to handle target shuffles.
Currently the patch only decodes a target shuffle, calls SimplifyDemandedVectorElts on its input operands and removes any shuffle that reduces to undef/zero/identity.
Future work will need to integrate this with combineX86ShufflesRecursively, add support for other x86 ops, etc.
NOTE: There is a minor regression that appears to be affecting further (extractelement?) combines which I haven't been able to solve yet - possibly something to do with how nodes are added to the worklist after simplification.
Differential Revision: https://reviews.llvm.org/D52140
llvm-svn: 342564
Summary:
This is required for GPUs with 16 bit instructions where f16 is a
legal register type and hence int_to_fp i1 to f16 is not lowered
by legalizing.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52018
Change-Id: Ie4c0fd6ced7cf10ad612023c6879724d9ded5851
llvm-svn: 342558
Clang-compiled object files currently don't include the symbol sizes and
types. Some tools however need that information. For example, ctfconvert
uses that information to generate FreeBSD's CTF representation from ELF
files.
With this patch, symbol sizes and types are included in object files.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Reported-by: Yutaro Hayakawa <yhayakawa3720@gmail.com>
llvm-svn: 342556
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
This is an alternative to D37896. I don't see a way to decompose multiplies
generically without a target hook to tell us when it's profitable.
ARM and AArch64 may be able to remove some duplicate code that overlaps with
this transform.
As a first step, we're only getting the most clear wins on the vector examples
requested in PR34474:
https://bugs.llvm.org/show_bug.cgi?id=34474
As noted in the code comment, it's likely that the x86 constraints are tighter
than necessary, but it may not always be a win to replace a pmullw/pmulld.
Differential Revision: https://reviews.llvm.org/D52195
llvm-svn: 342554
This involves changing the shouldExpandAtomicCmpXchgInIR interface, but I have
updated the in-tree backends using this hook (ARM, AArch64, Hexagon) so they
will see no functional change. Previously this hook returned bool, but it now
returns AtomicExpansionKind.
This hook allows targets to select how a given cmpxchg is to be expanded.
D48131 uses this to expand part-word cmpxchg to a target-specific intrinsic.
See my associated RFC for more info on the motivation for this change
<http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html>.
Differential Revision: https://reviews.llvm.org/D48130
llvm-svn: 342550
Fixes the unwind information generated for floating-point registers.
Previously, all padding registers were assumed to be four bytes wide. Now, the
width of the register is used to specify the amount of padding.
Patch by Jackson Woodruff!
Differential revision: https://reviews.llvm.org/D51494
llvm-svn: 342545
Introduce a new RISCVExpandPseudoInsts pass to expand atomic
pseudo-instructions after register allocation. This is necessary in order to
ensure that register spills aren't introduced between LL and SC, thus breaking
the forward progress guarantee for the operation. AArch64 does something
similar for CmpXchg (though only at O0), and Mips is moving towards this
approach (see D31287). See also [this mailing list
post](http://lists.llvm.org/pipermail/llvm-dev/2016-May/099490.html) from
James Knight, which summarises the issues with lowering to ll/sc in IR or
pre-RA.
See the [accompanying RFC
thread](http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html) for an
overview of the lowering strategy.
Differential Revision: https://reviews.llvm.org/D47882
llvm-svn: 342534
The 0x800 bit in @feat.00 needs to be set in order to make LLD pick up
the .gfid$y table. I believe this is fine to set even if we don't emit
the instrumentation.
We haven't emitted @feat.00 on 64-bit before. I see that MSVC does emit
it, but I'm not entirely sure what the default value should be. I went
with zero since that seems as safe as not emitting the symbol in the
first place.
Differential Revision: https://reviews.llvm.org/D52235
llvm-svn: 342532
- Instead of having both `SUnit::dump(ScheduleDAG*)` and
`ScheduleDAG::dumpNode(ScheduleDAG*)`, just keep the latter around.
- Add `ScheduleDAG::dump()` and avoid code duplication in several
places. Implement it for different ScheduleDAG variants.
- Add `ScheduleDAG::dumpNodeName()` in favor of the `SUnit::print()`
functions. They were only ever used for debug dumping and putting the
function into ScheduleDAG is consistent with the `dumpNode()` change.
llvm-svn: 342520
This allows the hard-coded shouldForceImmediate logic to be removed because
the generated MatchOperandParserImpl makes use of the current context (i.e.
the current mnemonic) to determine parsing behaviour, and so won't first try
to parse a register before parsing a symbol name.
No functional change is intended. gas accepts immediate arguments for call,
tail and lla. This patch doesn't address this discrepancy.
Differential Revision: https://reviews.llvm.org/D51733
llvm-svn: 342488
addi a0, a0, foo and lw a0, foo(a0) and similar are now rejected. An explicit
%lo and %pcrel_lo modifier is required. This matches gas behaviour.
llvm-svn: 342487
Reject bare symbols and accept only %pcrel_hi(sym) for auipc and %hi(sym) for
lui. Also test valid operand modifiers in rv32i-valid.s.
Note this is slightly stricter than gas, which will accept either %pcrel_hi or
%hi for both lui and auipc.
Differential Revision: https://reviews.llvm.org/D51731
llvm-svn: 342486
This is a follow-up to the previous patch that eliminated some of the rotates.
With this addition, we will also emit the record-form andis.
This patch increases the number of record-form rotates we eliminate by
more than 70%.
Differential revision: https://reviews.llvm.org/D44897
llvm-svn: 342478
Both ANDIo and ANDISo (and the 64-bit versions) are record-form instructions.
When optimizing compares, we handle the former in order to eliminate the compare
instruction but not the latter. This patch just adds the latter to the set of
instructions we optimize.
The reason these instructions need to be handled separately is that they are not
part of the RecFormRel map (since they don't have a non-record-form). The
missing "and-immediate-shifted" is just an oversight in the initial
implementation.
Differential revision: https://reviews.llvm.org/D51353
llvm-svn: 342472
This tries to make use of evaluateAsRelocatable in AArch64AsmParser::classifySymbolRef
to parse more complex expressions as relocatable operands. It is hopefully better than
the existing code which only handles Symbol +- Constant.
This allows us to parse more complex adr/adrp, mov, ldr/str and add operands. It also
loosens the requirements on parsing addends in ld/st and mov's and adds a number of
tests.
Differential Revision: https://reviews.llvm.org/D51792
llvm-svn: 342455
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch By: jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D52040
llvm-svn: 342441
This reverts r342395 as it caused error
> Argument value type does not match pointer operand type!
> %0 = atomicrmw volatile xchg i8* %_Value1, i32 1 monotonic, !dbg !25
> i8in function atomic_flag_test_and_set
> fatal error: error in backend: Broken function found, compilation aborted!
on bot http://green.lab.llvm.org/green/job/clang-stage1-configure-RA/
More details are available at https://reviews.llvm.org/D52080
llvm-svn: 342431
Add support mips64(el)-linux-gnuabin32 triples, and set them to N32.
Debian architecture name mipsn32/mipsn32el are also added. Set
UseIntegratedAssembler for N32 if we can detect it.
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D51408
llvm-svn: 342416
Summary:
The IR reference for the `byval` attribute states:
```
This indicates that the pointer parameter should really be passed by value
to the function. The attribute implies that a hidden copy of the pointee is
made between the caller and the callee, so the callee is unable to modify
the value in the caller. This attribute is only valid on LLVM pointer arguments.
```
However, on Win64, this attribute is unimplemented and the raw pointer is
passed to the callee instead. This is problematic, because frontend authors
relying on the implicit hidden copy (as happens for every other calling
convention) will see the passed value silently (if mutable memory) or
loudly (by means of a crash) modified because the callee treats the
location as scratch memory space it is allowed to mutate.
At this point, it's worth taking a step back to understand the context.
In most calling conventions, aggregates that are too large to be passed
in registers, instead get *copied* to the stack at a fixed (computable
from the signature) offset of the stack pointer. At the LLVM, we hide
this hidden copy behind the byval attribute. The caller passes a pointer
to the desired data and the callee receives a pointer, but these pointers
are not the same. In particular, the pointer that the callee receives
points to temporary stack memory allocated as part of the call lowering.
In most calling conventions, this pointer is never realized in registers
or memory. The temporary memory is simply defined by an implicit
offset from the stack pointer at function entry.
Win64, uniquely, works differently. The structure is still passed in
memory, but instead of being stored at an implicit memory offset, the
caller computes a pointer to the temporary memory and passes it to
the callee as a regular pointer (taking up a register, or if all
registers are taken up, an additional stack slot). Presumably, this
was done to allow eliding the copy when passing aggregates through
several functions on the stack.
This explains why ignoring the `byval` attribute mostly works on Win64.
The argument simply gets passed as a pointer and as long as we're ok
with the callee trampling all over that memory, there are no ill effects.
However, it does contradict the documentation of the `byval` attribute
which specifies that there is to be an implicit copy.
Frontends can of course work around this by never emitting the `byval`
attribute for Win64 and creating `alloca`s for the requisite temporary
stack slots (and that does appear to be what frontends are doing).
However, the presence of the `byval` attribute is not a trap for
frontend authors, since it seems to work, but silently modifies the
passed memory contrary to documentation.
I see two solutions:
- Disallow the `byval` attribute in the verifier if using the Win64
calling convention.
- Make it work by simply emitting a temporary stack copy as we would
with any other calling convention (frontends can of course always
not use the attribute if they want to elide the copy).
This patch implements the second option (make it work), though I would
be fine with the first also.
Ref: https://github.com/JuliaLang/julia/issues/28338
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51842
llvm-svn: 342402
isSupportedValue explicitly checked and accepted many types of value,
primarily for debugging reasons. Remove most of these checks and do a
bit of refactoring now that the pass is more stable. This also enables
ZExts to be sources, but this has very little practical benefit at the
moment extend instructions will still be introduced.
Differential Revision: https://reviews.llvm.org/D52080
llvm-svn: 342395
We allow overflowing instructions if they're decreasing and only used
by an unsigned compare. Add the extra condition that the icmp cannot
be using a negative immediate.
Differential Revision: https://reviews.llvm.org/D52102
llvm-svn: 342392
For constant non-uniform cases we'll never introduce more and/andn/or selects than already occur in generic pre-SSE41 ISD::SRL lowering.
llvm-svn: 342352
https://bugs.llvm.org/show_bug.cgi?id=38949
It's not clear to me that we even need a one-use check in this fold.
Ie, 2 independent loads might be better than a load+dependent shuffle.
Note that the existing re-use tests are not affected. We actually do form a
broadcast node in those tests now because there's no extra use of the
insert_subvector node in those cases. But something later in isel pattern
matching decides that it is not worth using a broadcast for the full load in
those tests:
Legalized selection DAG: %bb.0 'test_broadcast_2f64_4f64_reuse:'
t7: v2f64,ch = load<(load 16 from %ir.p0)> t0, t2, undef:i64
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t10: ch = store<(store 16 into %ir.p1)> t7:1, t7, t4, undef:i64
t18: v4f64 = insert_subvector undef:v4f64, t7, Constant:i64<0>
t20: v4f64 = insert_subvector t18, t7, Constant:i64<2>
Becomes:
t7: v2f64,ch = load<(load 16 from %ir.p0)> t0, t2, undef:i64
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t10: ch = store<(store 16 into %ir.p1)> t7:1, t7, t4, undef:i64
t21: v4f64 = X86ISD::SUBV_BROADCAST t7
ISEL: Starting selection on root node: t21: v4f64 = X86ISD::SUBV_BROADCAST t7
...
Created node: t27: v4f64 = INSERT_SUBREG IMPLICIT_DEF:v4f64, t7, TargetConstant:i32<7>
Morphed node: t21: v4f64 = VINSERTF128rr t27, t7, TargetConstant:i8<1>
llvm-svn: 342347
Summary: This unfortunately adds a move, but isn't that better than going to the int domain and back?
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52134
llvm-svn: 342327
Summary:
MOVMSK only care about the sign bit so we don't need the setcc to fill the whole element with 0s/1s. We can just shift the bit we're looking for into the sign bit. This saves a constant pool load.
Inspired by PR38840.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D52121
llvm-svn: 342326
Summary:
Implement shifts of vectors by i32. Since LLVM defines shifts as
binary operations between two vectors, this involves pattern matching
on splatted shift operands. For v2i64 shifts any i32 shift operands
have to be zero extended in the input and any i64 shift operands have
to be wrapped in the output. Depends on D52007.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51906
llvm-svn: 342302
Summary:
Integer types smaller than i32 must be extended to i32 by default.
The feature "crbits" introduced at r202451 handles i1 as a special case,
but it did not extend properly.
The caller was, therefore, passing i1 stack arguments by writing 0/1 to
the first byte of the 4-byte stack object and callee was
reading the first byte for the value.
"crbits" is enabled if the optimization level is greater than 1,
which is very common in "release builds".
Such discrepancies with ABI specification also introduces
potential incompatibility with programs or libraries
built with other compilers e.g. GCC.
Fixes PR38661
Reviewers: hfinkel, cuviper
Subscribers: sylvestre.ledru, glaubitz, nagisa, nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D51108
llvm-svn: 342288
Attempt to lower a shuffle as an unpack of elements from two inputs followed by a single-input (wider) permutation.
As long as the permutation is wider this is a win - there may be some circumstances where same size permutations would also be useful but I've left that for future work.
Differential Revision: https://reviews.llvm.org/D52043
llvm-svn: 342257
Summary:
GFX9 and above support sin/cos instructions with a greater range and thus don't
require a fract instruction prior to invocation.
Added a subtarget feature to reflect this and added code to take advantage of
expanded range on GFX9+
Also updated the tests to check correct behaviour
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51933
Change-Id: I1c1f1d3726a5ae32116646ca5cfa1ab4ef69e5b0
llvm-svn: 342222
On failing to find sequences that can be converted into dual macs,
try to find sequential 16-bit loads that are used by muls which we
can then use smultb, smulbt, smultt with a wide load.
Differential Revision: https://reviews.llvm.org/D51983
llvm-svn: 342210
After recent improvements which makes better use of LOC instead of IPM, the
TTI cost functions also needs to be updated to reflect this.
This involves sext, zext and xor of i1.
The tests were updated so that for z13 the new costs are expected, while the
old costs are still checked for on zEC12.
Review: Ulrich Weigand
https://reviews.llvm.org/D51339
llvm-svn: 342207
Summary:
I accidentally left this behind in D50306, and it causes a build warning
when I build with gcc7.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52022
Change-Id: I30f7a47047e9d9d841f652da66d2fea19e74842c
llvm-svn: 342189
When replacing a named register input to the appropriately sized
sub/super-register. In the case of a 64-bit value being assigned to a
register in 32-bit mode, match GCC's assignment.
Reviewers: eli.friedman, craig.topper
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D51502
llvm-svn: 342175
Summary:
Fixed assertions due to invalid fixup when encoding compressed instructions
(c.addi, c.addiw, c.li, c.andi) with bare symbols with/without modifiers.
This matches GAS behavior as well.
This bug was uncovered by a LLVM MC Disassembler Protocol Buffer Fuzzer
for the RISC-V assembly language.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, asb
Differential Revision: https://reviews.llvm.org/D52005
llvm-svn: 342160
Summary:
The illegal instruction 0x00 0x00 is being wrongly decoded as
c.addi4spn with 0 immediate.
The invalid instruction 0x01 0x61 is being wrongly decoded as
c.addi16sp with 0 immediate.
This bug was uncovered by a LLVM MC Disassembler Protocol Buffer Fuzzer
for the RISC-V assembly language.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, asb
Differential Revision: https://reviews.llvm.org/D51815
llvm-svn: 342159
Also, add a check to ensure that when main has the expected signature
we do not create a wrapper.
Differential Revision: https://reviews.llvm.org/D51562
llvm-svn: 342157
We previously only allowed truncs as sinks, but now allow them as
sources too. We do this by checking that the result type is the
narrow type that we're trying to optimise for.
Differential Revision: https://reviews.llvm.org/D51978
llvm-svn: 342141
Part of FixConsts wrongly assumes either a 8- or 16-bit constant
which can result in the wrong constants being generated during
promotion.
Differential Revision: https://reviews.llvm.org/D52032
llvm-svn: 342140
If an argument was passed on the stack, this
was using the default alignment.
I'm not sure there's an observable change from this. This
was observable due to bugs in expansion of unaligned
loads and stores, but since that is fixed I don't think
this matters much.
llvm-svn: 342133
The Technical Reference Manuals for these two CPUs state that branching
to an unaligned 32-bit instruction incurs an extra pipeline reload
penalty. That's bad.
This also enables the optimization at -Os since it costs on average one
byte per loop in return for 1 cycle per iteration, which is pretty good
going.
llvm-svn: 342127
This implements suggesting alternative mnemonics when an invalid one is
specified. For example `addru $9, $6, 17767` leads to the following
error message:
error: unknown instruction, did you mean: add, addiu, addu, maddu?
Differential revision: https://reviews.llvm.org/D40646
llvm-svn: 342119
Summary:
Previously we type legalized v2i32 div/rem by promoting to v2i64. But we don't support div/rem of vectors so op legalization would then scalarize it using i64 scalar ops since it doesn't know about the original promotion. 64-bit scalar divides on Intel hardware are known to be slow and in 32-bit mode they require a libcall.
This patch switches type legalization to do the scalarizing itself using i32.
It looks like the division by power of 2 optimization is still kicking in and leaving the code as a vector. The division by other constant optimization doesn't kick in pre type legalization since it ignores illegal types. And previously, after type legalization we scalarized the v2i64 since we don't have v2i64 MULHS/MULHU support.
Another option might be to widen v2i32 to v4i32 so we could do division by constant optimizations, but we'd have to be careful to only do that for constant divisors or we risk scalaring to 4 scalar divides.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51325
llvm-svn: 342114
The `IMAGE_REL_ARM_BRANCH20T` applies only to a `b.w` instruction. A
thumb-2 `bl` should be relocated using a `IMAGE_REL_ARM_BRANCH24T`.
Correct the relocation that we emit in such a case.
Resolves PR38620! Based on the patch by Jordan Rhee!
llvm-svn: 342109
Shufflevector instructions in LLVM IR that extract a subset of elements
of a longer input into a shorter vector can be done using VECTOR_SHUFFLEs.
This will avoid expanding them into constly extracts and inserts.
llvm-svn: 342091
Summary:
rL341389 broke code with tied register operands in inline assembly. For
example, `asm("" : "=r"(var) : "0"(var));`
The code above specifies the input operand to be in the same register
with the output operand, tying the two register. This patch makes this
kind of code work again.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, eraman, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51991
llvm-svn: 342084
Scalarization of a shuffle will break up the source vectors into individual
elements, and use them to assemble the resulting vector. An element type of
a legal vector type may not necessarily be a legal scalar type, so make
sure that the extracted values are extended to a legal scalar type.
llvm-svn: 342079
Move isa version determination into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
llvm-svn: 342069
Summary:
Match the ordering semantics of non-vector comparisons. For
floating point comparisons that do not correspond to instructions, the
tests check that some vector comparison instruction was emitted but do
not care about the full implementation.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51765
llvm-svn: 342064
There's no advantage to this instruction unless you need to avoid touching other flag bits. It's encoding is longer, it can't fold an immediate, it doesn't write all the flags.
I don't think gcc will generate this instruction either.
Fixes PR38852.
Differential Revision: https://reviews.llvm.org/D51754
llvm-svn: 342059
This patch adds codegen support for the saving/restoring
V8-V23 for functions specified with the aarch64_vector_pcs
calling convention attribute, as added in patch D51477.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51479
llvm-svn: 342049
This patch refactors several parts of AArch64FrameLowering
so that it can be easily extended to support saving/restoring
of FPR128 (Q) registers.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51478
llvm-svn: 342038
SMLAD and SMLALD instructions also come in the form of SMLADX and
SMLALDX which perform an exchange on their second operand. To support
this, more of the loads in the MAC candidates are compared for
sequential access and a boolean value has been added to BinOpChain.
AddMACCandiate has been refactored into a small pattern matching
state machine to reduce the amount of duplicated code, but also to
enable the matching to be more flexible. CreateParallelMACPairs now
iterates through all the candidates to find parallel ones.
Differential Revision: https://reviews.llvm.org/D51424
llvm-svn: 342033
This patch adds parsing support for the 'aarch64_vector_pcs'
calling convention attribute to calls and function declarations.
More information describing the vector ABI and procedure call standard
can be found here:
https://developer.arm.com/products/software-development-tools/\
hpc/arm-compiler-for-hpc/vector-function-abi
Reviewers: t.p.northover, rnk, rengolin, javed.absar, thegameg, SjoerdMeijer
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D51477
llvm-svn: 342030
Summary:
In GNUX23, is64BitMode returns true, but pointers are 32-bits. So we shouldn't copy pointer values into RSI/RDI since the widths don't match.
Fixes PR38865 despite what the title says. I think the llvm_unreachable in the copyPhysReg code tricked the optimizer and made the fatal error trigger.
Reviewers: rnk, efriedma, MatzeB, echristo
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51893
llvm-svn: 342015
into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
Differential Revision: https://reviews.llvm.org/D51890
llvm-svn: 341982
In r337348, I changed lowering to prefer X86ISD::UNPCKL/UNPCKH opcodes over MOVLHPS/MOVHLPS for v2f64 {0,0} and {1,1} shuffles when we have SSE2. This enabled the removal of a bunch of weirdly bitcasted isel patterns in r337349. To avoid changing the tests I placed a gross hack in isel to still emit movhlps instructions for fake unary unpckh nodes. A similar hack was not needed for unpckl and movlhps because we do execution domain switching for those. But unpckh and movhlps have swapped operand order.
This patch removes the hack.
This is a code size increase since unpckhpd requires a 0x66 prefix and movhlps does not. But if that's a big concern we should be using movhlps for all unpckhpd opcodes and let commuteInstruction turnit into unpckhpd when its an advantage.
Differential Revision: https://reviews.llvm.org/D49499
llvm-svn: 341973
GNUX32 uses 32-bit pointers despite is64BitMode being true. So we should use EAX to return the value.
Fixes ones of the failures from PR38865.
Differential Revision: https://reviews.llvm.org/D51940
llvm-svn: 341972
An fp_to_sint node would be incorrectly lowered to a TruncIntFP node in
single-float mode. This would trigger an "Unexpected illegal type!"
assert.
Patch by Dan Ravensloft.
Differential revision: https://reviews.llvm.org/D51810
llvm-svn: 341952
Search from i64 reducing phis, as well as i32, to allow the
generation of smlald instructions.
Differential Revision: https://reviews.llvm.org/D51101
llvm-svn: 341941
We've had the pass enabled downstream for a couple of weeks and it
seems to be okay, so enable it by default.
Differential Revision: https://reviews.llvm.org/D51920
llvm-svn: 341932
MIPS ISAs start to support third operand for the `rdhwr` instruction
starting from Revision 6. But LLVM generates assembler code with
three-operands version of this instruction on any MIPS64 ISA. The third
operand is always zero, so in case of direct code generation we get
correct code.
This patch fixes the bug by adding an instruction alias. The same alias
already exists for 32-bit ISA.
Ideally, we also need to reject three-operands version of the `rdhwr`
instruction in an assembler code if ISA revision is less than 6. That is
a task for a separate patch.
This fixes PR38861 (https://bugs.llvm.org/show_bug.cgi?id=38861)
Differential revision: https://reviews.llvm.org/D51773
llvm-svn: 341919
MOVMSKPS and MOVMSKPD both take FP types, but likely the operations before it are on integer types with just a int->fp bitcast between them. If the bitcast isn't used by anything else and doesn't change the element width we can look through it to simplify the integer ops.
llvm-svn: 341915
The was previously committed as r341749 then reverted as r341750 because
bit_cast needed to do its own thing to check is_trivially_copyable on GCC 4.x.
This is now done and std;:array should now get accepted.
llvm-svn: 341897
I'm having a hard time finding a test case for this, but we should be consistent here. The fact that we canonicalize all zeros and all ones constants to vXi32 and all other constants to loads makes this hard to hit the easy DAG combine infinite loop we get for some of the other types.
llvm-svn: 341859
Disassemblers cannot depend on main target headers. The same is true for
MCTargetDesc, but there's a lot more cleanup needed for that.
llvm-svn: 341822
This already worked if only one register piece was used,
but didn't if a type was split into multiple, unequal
sized pieces.
Fixes not splitting 3i16/v3f16 into two registers for
AMDGPU.
This will also allow fixing the ABI for 16-bit vectors
in a future commit so that it's the same for all subtargets.
llvm-svn: 341801
Summary:
This fixes a bug where a large number of implicit def instructions can fill the GCNHazardRecognizer lookahead buffer causing required NOPs to not be inserted.
Reviewers: nhaehnle, arsenm
Reviewed By: arsenm
Subscribers: sheredom, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51726
Change-Id: Ie75338f94de704ee5816b05afd0c922c6748a95b
llvm-svn: 341798
We have isel patterns for v4i32/v4f64 that artificially widen to v8i32/v8f64 so just use that.
If x86-experimental-vector-widening-legalization is enabled, we don't need any custom legalization and can just return. I've modified the test RUN lines to cover this case.
llvm-svn: 341765
Summary:
This patch allows vectors with a power of 2 number of elements and i8/i16 element type to select paddus/psubus instructions. ReplaceNodeResults has been updated to custom widen these operations up to 128 bits like we already do for PAVG.
Another step towards fixing PR38691
Reviewers: RKSimon, spatel
Reviewed By: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51818
llvm-svn: 341753
Summary: I saw a few places that were punning through a union of FP and integer, and that made me sad. Luckily, C++20 adds bit_cast for exactly that purpose. Implement our own version in ADT (without constexpr, leaving us a bit sad), and use it in the few places my grep-fu found silly union punning.
This was originally committed as r341728 and reverted in r341730.
Reviewers: javed.absar, steven_wu, srhines
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51693
llvm-svn: 341741
Summary: I saw a few places that were punning through a union of FP and integer, and that made me sad. Luckily, C++20 adds bit_cast for exactly that purpose. Implement our own version in ADT (without constexpr, leaving us a bit sad), and use it in the few places my grep-fu found silly union punning.
Reviewers: javed.absar
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51693
llvm-svn: 341728
Summary:
Since the shuffle mask is not exposed as an operand in the native ISel
DAG, create a new WebAssembly ISD node exposing the mask. The mask is
lowered as sixteen immediate byte indices no matter what type the
original vector shuffle was operating on.
This CL depends on D51656
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51659
llvm-svn: 341718
Summary: To explicitly opt out of LEB encoding for these immediates.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51766
llvm-svn: 341707
Summary:
Reserving registers x1-7 is used to support CONFIG_ARM64_LSE_ATOMICS in Linux kernel. This change adds support for reserving registers x1 through x7.
Reviewers: javed.absar, phosek, srhines, nickdesaulniers, efriedma
Reviewed By: nickdesaulniers, efriedma
Subscribers: niravd, jfb, manojgupta, nickdesaulniers, jyknight, efriedma, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D48580
llvm-svn: 341706
The generic type legalizer will scalarize vXi1 instructions getting rid of the vector entirely. Creating wider vector instructions is just going to prevent that.
llvm-svn: 341705
The type legalizer will try to scalarize this and fail.
It looks like there's some other v1iX oddities out there too since we still generated some vector instructions.
llvm-svn: 341704
Similar to what was recently done for addcarry/subborrow and has been done for rdrand/rdseed for a while. It's better to use two results and an explicit store in IR when the store isn't part of the semantics of the instruction. This allows store->load forwarding to happen in the middle end. Or the store to be removed if its never loaded.
Differential Revision: https://reviews.llvm.org/D51803
llvm-svn: 341698
Summary:
RISCVDisassembler should check number of bytes available before reading them.
Crash noticed when enabling -DLLVM_USE_SANITIZER=Address.
This bug was uncovered by a LLVM MC Disassembler Protocol Buffer Fuzzer for the RISC-V assembly language.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, asb
Differential Revision: https://reviews.llvm.org/D51708
llvm-svn: 341686
We should represent the store directly in IR instead. This gives the middle end a chance to remove it if it can see a load from the same address.
Differential Revision: https://reviews.llvm.org/D51769
llvm-svn: 341677
Previously we only handled loads in operand 0, but nothing guarantees the load will be operand 0 for commutable operations.
Differential Revision: https://reviews.llvm.org/D51768
llvm-svn: 341675
Because t2LDREX (& t2STREX) were marked as AddrModeNone, but did allow a
FrameIndex operand, rewriteT2FrameIndex asserted. This gives them a
proper addressing-mode and tells the rewriter about it so that encodable
offsets are exploited and others are rejected.
Should fix PR38828.
llvm-svn: 341642
ADC is commutable and the load could be in either operand, but we were only checking operand 0.
Ideally we'd mark X86adc_flag as commutable and tablegen would automatically do this, but the EFLAGS register mention is preventing it.
llvm-svn: 341606
The peephole pass likely gets this normally, but we should be doing it during isel.
Ideally we'd just make the X86adc_flag pattern SDNPCommutable, but the tablegen doesn't handle that when one of the operands is a register reference.
llvm-svn: 341596
SHF_ARM_PURECODE flag when being built with the -mexecute-only flag.
All code sections of an ELF must have the flag set for the final .text
section to be execute-only, otherwise the flag gets removed.
A HasData flag is added to MCSection to aid in the determination that
the section is empty. A virtual setTargetSectionFlags is added to
MCELFObjectTargetWriter to allow subclasses to set target specific
section flags to be added to sections which we then use in the ARM
backend to set SHF_ARM_PURECODE.
Patch by Ivan Lozano!
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D48792
llvm-svn: 341593
Summary:
Instruction printer shouldn't crash with assertions due to incorrect input data. llvm_unreachable is not intended for runtime error handling.
Reviewers: petecoup
Reviewed By: petecoup
Differential Revision: https://reviews.llvm.org/D51728
llvm-svn: 341581
Summary:
I added a few ARM64 memset codegen tests in r341406 and r341493, and annotated
where the generated code was bad. This patch fixes the majority of the issues by
requesting that a 2xi64 vector be used for memset of 32 bytes and above.
The patch leaves the former request for f128 unchanged, despite f128
materialization being suboptimal: doing otherwise runs into other asserts in
isel and makes this patch too broad.
This patch hides the issue that was present in bzero_40_stack and bzero_72_stack
because the code now generates in a better order which doesn't have the store
offset issue. I'm not aware of that issue appearing elsewhere at the moment.
<rdar://problem/44157755>
Reviewers: t.p.northover, MatzeB, javed.absar
Subscribers: eraman, kristof.beyls, chrib, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51706
llvm-svn: 341558
This basically reverts a change made in r336217, but improves the text of the error message for not allowing IP-relative addressing in 32-bit mode.
Fixes PR38826.
Patch by Iain Sandoe.
llvm-svn: 341512
This replaces r337723. The global list in the module can be huge with LTO,
plus the module can change between different invocations of the pass, so
there is no easy way to deterministically cache the ordering (especially
in the presence of multiple threads).
llvm-svn: 341478
This removes the FrameAccess struct that was added to the interface
in D51537, since the PseudoValue from the MachineMemoryOperand
can be safely casted to a FixedStackPseudoSourceValue.
Reviewers: MatzeB, thegameg, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51617
llvm-svn: 341454
Emit a waterfall loop in the general case for a potentially-divergent Rsrc
operand. When practical, avoid this by using Addr64 instructions.
Differential Revision: https://reviews.llvm.org/D50982
llvm-svn: 341413
On Windows, if shouldAssumeDSOLocal returns false, it's either a
dllimport reference, or a reference that we should treat as non-local
and create a stub for.
Clean up AArch64Subtarget::ClassifyGlobalReference a little while
touching the flag handling relating to dllimport.
Differential Revision: https://reviews.llvm.org/D51590
llvm-svn: 341402
The runtime pseudo relocations can't handle the AArch64 format PC
relative addressing in adrp+add/ldr pairs. By using stubs, the potentially
dllimported addresses can be touched up by the runtime pseudo relocation
framework.
Differential Revision: https://reviews.llvm.org/D51452
llvm-svn: 341401
Use MachineOperand::ChangeToImmediate rather than reassigning
MachineOperands to new values created from MachineOperand::CreateImm,
so that their parent pointers are preserved.
This fixes "Instruction has operand with wrong parent set" errors
reported by the MachineVerifier.
llvm-svn: 341389
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
implementing the proposed mitigation technique described in the original
design document.
The idea is to check after calls that the return address used to arrive
at that location is in fact the correct address. In the event of
a mis-predicted return which reaches a *valid* return but not the
*correct* return, this will detect the mismatch much like it would
a mispredicted conditional branch.
This is the last published attack vector that I am aware of in the
Spectre v1 space which is not mitigated by SLH+retpolines. However,
don't read *too* much into that: this is an area of ongoing research
where we expect more issues to be discovered in the future, and it also
makes no attempt to mitigate Spectre v4. Still, this is an important
completeness bar for SLH.
The change here is of course delightfully simple. It was predicated on
cutting support for post-instruction symbols into LLVM which was not at
all simple. Many thanks to Hal Finkel, Reid Kleckner, and Justin Bogner
who helped me figure out how to do a bunch of the complex changes
involved there.
Differential Revision: https://reviews.llvm.org/D50837
llvm-svn: 341358
retpolines.
This implements the core design of tracing the intended target into the
target, checking it, and using that to update the predicate state. It
takes advantage of a few interesting aspects of SLH to make it a bit
easier to implement:
- We already split critical edges with conditional branches, so we can
assume those are gone.
- We already unfolded any memory access in the indirect branch
instruction itself.
I've left hard errors in place to catch if any of these somewhat subtle
invariants get violated.
There is some code that I can factor out and share with D50837 when it
lands, but I didn't want to couple landing the two patches, so I'll do
that in a follow-up cleanup commit if alright.
Factoring out the code to handle different scenarios of materializing an
address remains frustratingly hard. In a bunch of cases you want to fold
one of the cases into an immediate operand of some other instruction,
and you also have both symbols and basic blocks being used which require
different methods on the MI builder (and different operand kinds).
Still, I'll take a stab at sharing at least some of this code in
a follow-up if I can figure out how.
Differential Revision: https://reviews.llvm.org/D51083
llvm-svn: 341356
This patch modifies hasStandardEncoding() / inMicroMipsMode() /
inMips16Mode() methods of the MipsSubtarget class so only one can be
true at any one time. That prevents the selection of microMIPS and MIPS
instructions and patterns that are defined in TableGen files at the same
time. A few new patterns and instruction definitions hae been added to
keep test cases passed.
Differential revision: https://reviews.llvm.org/D51483
llvm-svn: 341338
A ReadAdvance was incorrectly added to the SchedReadWrite list associated with
the following SSE instructions:
sqrtss
sqrtsd
rsqrtss
rcpss
As a consequence, a wrong operand latency was computed for the register operand
used as the base address of the folded load operand.
This patch removes the wrong ReadAdvance, and updates the llvm-mca test cases.
There is still a problem with correctly modeling partial register writes on XMM
registers This other problem is currently tracked here:
https://bugs.llvm.org/show_bug.cgi?id=38813
Differential Revision: https://reviews.llvm.org/D51542
llvm-svn: 341326
Also adjust some of dsymutil's headers to put the header guards at the top,
otherwise the compiler will not recognize them as header guards.
llvm-svn: 341323
When initial support for dllimport was added for aarch64 in
SVN r316555, ClassifyGlobalReference didn't set the MO_DLLIMPORT
flag - that was only completed in SVN r323810. Reuse the return
value from ClassifyGlobalReference for this purpose as well.
llvm-svn: 341310
For instructions that spill/fill to and from multiple frame-indices
in a single instruction, hasStoreToStackSlot and hasLoadFromStackSlot
should return an array of accesses, rather than just the first encounter
of such an access.
This better describes FI accesses for AArch64 (paired) LDP/STP
instructions.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D51537
llvm-svn: 341301
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch by jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D51506
llvm-svn: 341293
The 'rol Rd' instruction is equivalent to 'adc Rd'.
This caused compile warnings from tablegen because of conflicting bits
shared between each instruction.
llvm-svn: 341275
These intrinsics use the same implementation as PTEST intrinsics, but use vXi1 vectors.
New clang builtins will be accompanying them shortly.
llvm-svn: 341259
This patch recognizes shuffles that shift elements and fill with zeros. I've copied and modified the shift matching code we use for normal vector registers to do this. I'm not sure if there's a good way to share more of this code without making the existing function more complex than it already is.
This will be used to enable kshift intrinsics in clang.
Differential Revision: https://reviews.llvm.org/D51401
llvm-svn: 341227
The presence of a ReadAdvance for input operand #0 is problematic
because it changes the input latency of the register used as the base address
for the folded load.
A broadcast cannot start executing if the load address hasn't been computed yet.
In the llvm-mca example, the VBROADCASTSS is dependent on the address generated
by the LEAQ. That means, it cannot start until LEAQ reaches the write-back
stage. If we apply ReadAdvance, then we wrongly assume that the load can start 3
cycles in advance.
Differential Revision: https://reviews.llvm.org/D51534
llvm-svn: 341222
The `mtc1` and `mfc1` definitions in the MipsInstrFPU.td have MMRel,
but do not have StdMMR6Rel tags. When these instructions are emitted
for microMIPS R6 targets, `Mips::MipsR62MicroMipsR6` nor
`Mips::Std2MicroMipsR6` cannot find correct op-codes and as a result the
backend uses mips32 variant of the instructions encoding.
The patch fixes this problem by adding the StdMMR6Rel tag and check
instructions encoding in the test case.
Differential revision: https://reviews.llvm.org/D51482
llvm-svn: 341221
The intention is to enable the extract_vector_elt load combine,
and doing this for other operations interferes with more
useful optimizations on vectors.
Handle any type of load since in principle we should do the
same combine for the various load intrinsics.
llvm-svn: 341219
This patch fixes the number of micro opcodes, and processor resource cycles for
the following AVX instructions:
vinsertf128rr/rm
vperm2f128rr/rm
vbroadcastf128
Tests have been regenerated using the usual scripts in the llvm/utils directory.
Differential Revision: https://reviews.llvm.org/D51492
llvm-svn: 341185
These stubs should never be emitted for internal symbols, and
nothing in AsmPrinter ever actually use this value when producing
the stubs for COFF anyway.
llvm-svn: 341177
The runtime pseudo relocations can't handle the ARM format embedded
addresses in movw/movt pairs. By using stubs, the potentially
dllimported addresses can be touched up by the runtime pseudo relocation
framework.
Differential Revision: https://reviews.llvm.org/D51450
llvm-svn: 341176
It has essentially the same benefit it has on 64-bit ARM: it
substantially reduces the number of constants used by large GEP
operations. Seems to be generally helpful across a few different
codebases I've tried.
Differential Revision: https://reviews.llvm.org/D51462
llvm-svn: 341136
Summary:
RISCVAsmParser needs to handle the case the error message is of specific type, other than the generic Match_InvalidOperand, and the corresponding
operand is missing.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer Fuzzer for the RISC-V assembly language.
Reviewers: asb
Reviewed By: asb
Subscribers: llvm-commits, jocewei, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX
Differential Revision: https://reviews.llvm.org/D50790
llvm-svn: 341104
This assert tried to check that AND constants are only on the RHS. But its possible for both operands to be constants if one is opaque which will prevent the AND from being constant folded.
Fixes PR38771
llvm-svn: 341102
Summary:
Now uses the StackBased bit from the tablegen defs to identify
stack instructions (and ignore register based or non-wasm instructions).
Also changed how we store operands, since we now have up to 16 of them
per instruction. To not cause static data bloat, these are compressed
into a tiny table.
+ a few other cleanups.
Tested:
- MCTest
- llvm-lit -v `find test -name WebAssembly`
Reviewers: dschuff, jgravelle-google, sunfish, tlively
Subscribers: sbc100, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D51320
llvm-svn: 341081
..Move all target-dependent checks into new isCopyInstrImpl method.
This change allows us to treat MoveReg-type instructions and generic
COPY instruction in the same way
Differential Revision: https://reviews.llvm.org/D49913
llvm-svn: 341072
Summary:
This is patch 1 of the new DivergenceAnalysis (https://reviews.llvm.org/D50433).
The purpose of this patch is to free up the name DivergenceAnalysis for the new generic
implementation. The generic implementation class will be shared by specialized
divergence analysis classes.
Patch by: Simon Moll
Reviewed By: nhaehnle
Subscribers: jvesely, jholewinski, arsenm, nhaehnle, mgorny, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50434
Change-Id: Ie8146b11be2c50d5312f30e11c7a3036a15b48cb
llvm-svn: 341071
Summary:
In the case of (and reg, constant) or (or reg, constant), it can be
beneficial to use a ANDNrr/ORNrr instruction instead of ANDrr/ORrr,
if the complement of the constant can be encoded using a single SETHI
instruction instead of a SETHI/ORri pair.
If the constant has more than one use, it is probably better to keep it
in its original form.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50964
llvm-svn: 341069
Summary:
This is a continuation of https://reviews.llvm.org/D49727
Below the original text, current changes in the comments:
Currently, in line with GCC, when specifying reserved registers like sp or pc on an inline asm() clobber list, we don't always preserve the original value across the statement. And in general, overwriting reserved registers can have surprising results.
For example:
extern int bar(int[]);
int foo(int i) {
int a[i]; // VLA
asm volatile(
"mov r7, #1"
:
:
: "r7"
);
return 1 + bar(a);
}
Compiled for thumb, this gives:
$ clang --target=arm-arm-none-eabi -march=armv7a -c test.c -o - -S -O1 -mthumb
...
foo:
.fnstart
@ %bb.0: @ %entry
.save {r4, r5, r6, r7, lr}
push {r4, r5, r6, r7, lr}
.setfp r7, sp, #12
add r7, sp, #12
.pad #4
sub sp, #4
movs r1, #7
add.w r0, r1, r0, lsl #2
bic r0, r0, #7
sub.w r0, sp, r0
mov sp, r0
@APP
mov.w r7, #1
@NO_APP
bl bar
adds r0, #1
sub.w r4, r7, #12
mov sp, r4
pop {r4, r5, r6, r7, pc}
...
r7 is used as the frame pointer for thumb targets, and this function needs to restore the SP from the FP because of the variable-length stack allocation a. r7 is clobbered by the inline assembly (and r7 is included in the clobber list), but LLVM does not preserve the value of the frame pointer across the assembly block.
This type of behavior is similar to GCC's and has been discussed on the bugtracker: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11807 . No consensus seemed to have been reached on the way forward. Clang behavior has briefly been discussed on the CFE mailing (starting here: http://lists.llvm.org/pipermail/cfe-dev/2018-July/058392.html). I've opted for following Eli Friedman's advice to print warnings when there are reserved registers on the clobber list so as not to diverge from GCC behavior for now.
The patch uses MachineRegisterInfo's target-specific knowledge of reserved registers, just before we convert the inline asm string in the AsmPrinter.
If we find a reserved register, we print a warning:
repro.c:6:7: warning: inline asm clobber list contains reserved registers: R7 [-Winline-asm]
"mov r7, #1"
^
Reviewers: efriedma, olista01, javed.absar
Reviewed By: efriedma
Subscribers: eraman, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D51165
llvm-svn: 341062
Providing that the load is known to be 4 byte aligned, we can optimise a
ldr(adr address) to just ldr address.
Differential Revision: https://reviews.llvm.org/D51030
llvm-svn: 341058
We now only add +64bit to the CPU string for "generic" CPU. All other CPU names are assumed to have the feature flag already set if they support 64-bit. I've remove the implies from CMPXCHG8 so that Feature64Bit only comes in via CPUs or user passing -mattr=+64bit.
I've changed the assert to a report_fatal_error so it's not lost in Release builds.
The test updates are to fix things that tripped the new error.
Differential Revision: https://reviews.llvm.org/D51231
llvm-svn: 341022
We don't have enough information to know if struct types being
bitcast will cause validation failures or not, so be conservative
and allow such cases to persist (fot now).
Fixes: https://bugs.llvm.org/show_bug.cgi?id=38711
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51460
llvm-svn: 341010
Variables declared with the dllimport attribute are accessed via a
stub variable named __imp_<var>. In MinGW configurations, variables that
aren't declared with a dllimport attribute might still end up imported
from another DLL with runtime pseudo relocs.
For x86_64, this avoids the risk that the target is out of range
for a 32 bit PC relative reference, in case the target DLL is loaded
further than 4 GB from the reference. It also avoids having to make the
text section writable at runtime when doing the runtime fixups, which
makes it worthwhile to do for i386 as well.
Add stub variables for all dso local data references where a definition
of the variable isn't visible within the module, since the DLL data
autoimporting might make them imported even though they are marked as
dso local within LLVM.
Don't do this for variables that actually are defined within the same
module, since we then know for sure that it actually is dso local.
Don't do this for references to functions, since there's no need for
runtime pseudo relocations for autoimporting them; if a function from
a different DLL is called without the appropriate dllimport attribute,
the call just gets routed via a thunk instead.
GCC does something similar since 4.9 (when compiling with -mcmodel=medium
or large; from that version, medium is the default code model for x86_64
mingw), but only for x86_64.
Differential Revision: https://reviews.llvm.org/D51288
llvm-svn: 340942
MipsSEInstrInfo class defines for internal purpose unconditional
branches as Mips::B nad Mips:J even in case of microMIPS code
generation. Under some conditions that leads to the bug - for rather long
branch which fits to Mips jump instruction offset size, but does not fit
to microMIPS jump offset size, we generate 'short' branch and later show
an error 'out of range PC16 fixup' after check in the isBranchOffsetInRange
routine.
Differential revision: https://reviews.llvm.org/D50615
llvm-svn: 340932
Involves microMIPS's jump in the analyzable branch set to reduce some
code patterns.
Differential revision: https://reviews.llvm.org/D50613
llvm-svn: 340931
For a certain combination of options, BuildPairF64_{64}, ExtractElementF64{_64}
may be expanded into instructions using stack.
Add implicit operand $sp for such cases so that ShrinkWrapping doesn't move
prologue setup below them.
Fixes MultiSource/Benchmarks/MallocBench/cfrac for
'--target=mips-img-linux-gnu -mcpu=mips32r6 -mfpxx -mnan=2008'
and
'--target=mips-img-linux-gnu -mcpu=mips32r6 -mfp64 -mnan=2008 -mno-odd-spreg'.
Differential Revision: https://reviews.llvm.org/D50986
llvm-svn: 340927
Noticed while looking at D49562 codegen - we can avoid a large constant mask load and a slow VPBLENDVB select op by using VPBLENDW+VPBLENDD instead.
TODO: As discussed on the patch, we should investigate adding VPBLENDVB handling to target shuffle combining as well, that will allow us to extend this to VPBLENDW+VPBLENDW+VPBLENDD.
Differential Revision: https://reviews.llvm.org/D50074
llvm-svn: 340913
Summary:
Add some optional code to validate getInstSizeInBytes for emitted
instructions. This flushed out some issues which are fixed by this
patch:
- Streamline getInstSizeInBytes
- Properly define the VI readlane/writelane instruction as VOP3
- Fix the inline constant determination. Specifically, this change
fixes an issue where a 32-bit value of 0xffffffff was recorded
as unsigned. This is equal to -1 when restricting to a 32-bit
comparison, and an inline constant can be used.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D50629
Change-Id: Id87c3b7975839da0de8156a124b0ce98c5fb47f2
llvm-svn: 340903
These are intrinsics for supporting kadd builtins in clang. These builtins are already in gcc to implement intrinsics from icc. Though they are missing from the Intel Intrinsics Guide.
This instruction adds two mask registers together as if they were scalar rather than a vXi1. We might be able to get away with a bitcast to scalar and a normal add instruction, but that would require DAG combine smarts in the backend to recoqnize add+bitcast. For now I'd prefer to go with the easiest implementation so we can get these builtins in to clang with good codegen.
Differential Revision: https://reviews.llvm.org/D51370
llvm-svn: 340869
This can leave behind the uses with the defs removed.
Since this should only really happen in tests, it's not worth the
effort of trying to handle this.
llvm-svn: 340866
Summary:
Add comments to help readers avoid having to read tablegen backends to
understand the code. Also remove unecessary breaks from the output.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51371
llvm-svn: 340864
The original motivating example uses a 64-bit add, so the carry
is used. Insert a copy from VCC. This may allow shrinking of
the used carry instruction. At worst, we are replacing a
mov to materialize the constant with a copy of vcc.
llvm-svn: 340862
This needs to be done in the SSA fold operands
pass to be effective, so there is a bit of overlap
with SIShrinkInstructions but I don't think this
is practically avoidable.
llvm-svn: 340859
These instructions were added on the PentiumPro along with CMOV.
This was already comprehended by the lowering process which should emit an alternate sequence using FCOM and FNSTW. This just makes it an explicit error if that doesn't work for some reason.
llvm-svn: 340844
This patch creates the shift mask and actual shift using the vXi16 vector shift ops.
Differential Revision: https://reviews.llvm.org/D51263
llvm-svn: 340813
This patch issues an error message if Darwin ABI is attempted with the PPC
backend. It also cleans up existing test cases, either converting the test to
use an alternative triple or removing the test if the coverage is no longer
needed.
Updated Tests
-------------
The majority of test cases were updated to use a different triple that does not
include the Darwin ABI. Many tests were also updated to use FileCheck, in place
of grep.
Deleted Tests
-------------
llvm/test/tools/dsymutil/PowerPC/sibling.test was originally added to test
specific functionality of dsymutil using an object file created with an old
version of llvm-gcc for a Powerbook G4. After a discussion with @JDevlieghere he
suggested removing the test.
llvm/test/CodeGen/PowerPC/combine_loads_from_build_pair.ll was converted from a
PPC test to a SystemZ test, as the behavior is also reproducible there.
All other tests that were deleted were specific to the darwin/ppc ABI and no
longer necessary.
Phabricator Review: https://reviews.llvm.org/D50988
llvm-svn: 340795
Summary:
The new stackification backend generates the giant switch statement
used to translate instructions to their stackified forms. I did this
because it was more interesting than adding all the different vector
versions of the various SIMD instructions to the switch statment
manually.
Reviewers: aardappel, aheejin, dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51318
llvm-svn: 340781
Loosens an assert in getMemRIX16Encoding that restricts DQ-form instructions to
using an immediate, so that we can assemble instructions like lxv/stxv where the
offset is an expression.
Differential Revision: https://reviews.llvm.org/D51122
llvm-svn: 340761
We're using a 256-bit PACKUS to do the truncation, but that instruction operates on 128-bit lanes. So previously we shuffled first to rearrange the lanes. But that requires 2 shuffles. Instead we can shuffle after the PACKUS using a single VPERMQ. This matches what our normal LowerTRUNCATE code does when it uses PACKUS.
Differential Revision: https://reviews.llvm.org/D51284
llvm-svn: 340757
InstCombine mucks these up a bit. So we need to do some additional pattern matching to fix it. There are a still a few special cases not handled, but this covers the general case.
Differential Revision: https://reviews.llvm.org/D50952
llvm-svn: 340756
Summary:
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51241
llvm-svn: 340750
This commit has caused failures in some internal benchmarks. Temporarily
reverting this patch until the issue can be diagnosed and fixed.
llvm-svn: 340740
Summary: If an object file ends with a relocation that is smaller
than 4 bytes we will write outside the Data array and trigger an
"Invalid index" assertion.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50971
llvm-svn: 340736
The internal benchmark failure reported by Google was due to a missing
check for the result type for the sign-extend and shift DAG. This commit
adds the check and re-commits the patch.
llvm-svn: 340734
Summary: The GR740 provides an up cycle counter in the registers ASR22
and ASR23. As these registers can not be read together atomically we only
use the value of ASR23 for llvm.readcyclecounter(). The ASR23 register
holds the 32 LSBs of the up-counter.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: jfb, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48638
llvm-svn: 340733
Summary:
Currently bitcasting constants from f64 to v2i32 is done by storing the
value to the stack and then loading it again. This is not necessary, but
seems to happen because v2i32 is a valid type for Sparc V8. If it had not
been legal, we would have gotten help from the type legalizer.
This patch tries to do the same work as the legalizer would have done by
bitcasting the floating point constant and splitting the value up into a
vector of two i32 values.
Reviewers: venkatra, jyknight
Reviewed By: jyknight
Subscribers: glaubitz, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D49219
llvm-svn: 340723
We cannot directy reuse the patterns of StPat because for some reason the store
DAG node and the atomic_store_nn DAG nodes put the ptr and the value in
different positions. Currently we attempt to store the address to an address
formed by the value.
Differential Revision: https://reviews.llvm.org/D51217
llvm-svn: 340722
vXi32 support was recently moved from LowerMUL_LOHI to LowerMULH.
This commit shares the getOperand calls, switches both to use common IsSigned flag, and hoists the NumElems/NumElts variable.
llvm-svn: 340720
Summary: This was inheriting the cost from the AVX table, but should be legal under AVX512.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51267
llvm-svn: 340708
Summary:
Previously most CPUs inherited cmov support through Feature64Bit(or FeatureCMPXCHG16HB implying Feature64Bit) or FeatureSSE1.
This has the surprising side effect that -mattr=-cmov causes an assert to fire in 64-bit mode because it clears the Feature64Bit. Or in 32-bit mode, -mattr=-cmov disables any sse/avx features which seems surprising.
This patch removes the implication and instead updates hasCMOV in X86Subtarget to check SSE1 or is64Bit in addition to the regular cmov flag. This should keep most things working the way they did before. I don't believe there is a way to specific "-cmov" directly from clang so this should only effect our lower level tools.
This does stop -mattr=cx16(cmpxchg16b) from implying cmov is enabled via the 64bit flag as you can see from one of the changed tests. But that was a 32-bit test so I don't know why it enabled cx16 anyway.
For the other test I had to add -sse to override the new sse check in hasCMOV.
Reviewers: RKSimon, DavidKreitzer, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51228
llvm-svn: 340707
Summary: This matches gcc and one cpuid dump I found online. Given that these are considered 7th generation x86 CPU it seems likely they support cmov since cmov was added by Intel in their 6th generation.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51264
llvm-svn: 340706
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Legalize G_ADD for types smaller than i32.
LegalizationArtifactCombiner replaces extend instructions with appropriate
bitwise instructions.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51213
llvm-svn: 340697
Summary:
The only time vector SMUL_LOHI/UMUL_LOHI nodes are created is during division/remainder lowering. If its created before op legalization, generic DAGCombine immediately turns that SMUL_LOHI/UMUL_LOHI into a MULHS/MULHU since only the upper half is used. That node will stick around through vector op legalization and will be turned back into UMUL_LOHI/SMUL_LOHI during op legalization. It will then be custom lowered by the X86 backend. Due to this two step lowering the vector shuffles created by the custom lowering get legalized after their inputs rather than before. This prevents the shuffles from being combined with any build_vector of constants.
This patch uses changes vXi32 to use MULHS/MULHU instead. This is what the later DAG combine did anyway. But by skipping the change back to UMUL_LOHI/SMUL_LOHI we lower it before any constant BUILD_VECTORS. This allows the vector_shuffle creation to constant fold with the build_vectors. This accounts for the test changes here.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51254
llvm-svn: 340690
Summary:
Previously the value being stored is the last operand in SDNode. This causes the type legalizer to visit the mask operand before the value operand. The type legalizer was more complicated because of this since we want the type of the value to drive the decisions.
This patch moves the value to be the first operand so we visit it first during type legalization. It also simplifies the type legalization code accordingly.
X86 is currently the only in tree target that uses this SDNode. Not sure if there are any users out of tree.
Reviewers: RKSimon, delena, hfinkel, eli.friedman
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50402
llvm-svn: 340689
This is a preliminary step for a preliminary step for D50992.
I noticed that x86 often misses chances to load a scalar directly
into a vector register.
So this patch is just allowing more of those cases to match a
broadcast op in lowerBuildVectorAsBroadcast(). The old code comment
said it doesn't make sense to use a broadcast when we're loading a
single element and everything else is undef, but I think that's the
best case in the improved tests in insert-loaded-scalar.ll. We avoid
scalar-to-vector-register move and/or less efficient shuffling.
Note that there are some existing types that were already producing
a broadcast, but that happens semi-accidentally. Ie, it's not
happening as part of lowerBuildVectorAsBroadcast(). The build vector
gets expanded into load + shuffle, and then shuffle lowering produces
the broadcast.
Description of the other test diffs:
1. avx-basic.ll - replacing load+shufle is a win.
2. sse3-avx-addsub-2.ll - vmovddup vs. vbroadcastss is neutral
3. sse41.ll - don't care - we convert that intrinsic to generic IR now, so this test is deprecated
4. vector-shuffle-128-v8.ll / vector-shuffle-256-v16.ll - pshufb alternatives with an extra instruction are not obviously bad
Differential Revision: https://reviews.llvm.org/D51125
llvm-svn: 340685
Summary:
Patch by Marek Olsak and David Stuttard, both of AMD.
This adds a new amdgcn intrinsic supporting s.buffer.load, in particular
multiple dword variants. These are convenient to use from some front-end
implementations.
Also modified the existing llvm.SI.load.const intrinsic to common up the
underlying implementation.
This modification also requires that we can lower to non-uniform loads correctly
by splitting larger dword variants into sizes supported by the non-uniform
versions of the load.
V2: Addressed minor review comments.
V3: i1 glc is now i32 cachepolicy for consistency with buffer and
tbuffer intrinsics, plus fixed formatting issue.
V4: Added glc test.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51098
Change-Id: I83a6e00681158bb243591a94a51c7baa445f169b
llvm-svn: 340684
This patch will address using the xscpsgndp instruction to copy floating point
scalar registers instead of the xxlor (specifically XXLORf) instruction that is
currently used. Additionally, this patch of utilizing xscpsgndp will apply to
P9, while pre-P9 will still use xxlor.
Patch by amyk
Differential Revision: https://reviews.llvm.org/D50004
llvm-svn: 340643
This adds a new method to ELFObjectFileBase that returns the symbols and addresses of PLT entries.
This design was suggested by pcc and eugenis in https://reviews.llvm.org/D49383.
Differential Revision: https://reviews.llvm.org/D50203
llvm-svn: 340610
Lower integer arguments smaller than i32.
Support both register and stack arguments.
Define setLocInfo function for setting LocInfo field in ArgLocs vector.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51031
llvm-svn: 340572
Summary:
Splats are fewer bytes than v128.consts, so use them when either could
apply.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51179
llvm-svn: 340569
The commit that added this functionality:
rL322957
may be causing/exposing a miscompile in PR38648:
https://bugs.llvm.org/show_bug.cgi?id=38648
so allow enabling/disabling to make debugging easier.
llvm-svn: 340540
subtarget features for indirect calls and indirect branches.
This is in preparation for enabling *only* the call retpolines when
using speculative load hardening.
I've continued to use subtarget features for now as they continue to
seem the best fit given the lack of other retpoline like constructs so
far.
The LLVM side is pretty simple. I'd like to eventually get rid of the
old feature, but not sure what backwards compatibility issues that will
cause.
This does remove the "implies" from requesting an external thunk. This
always seemed somewhat questionable and is now clearly not desirable --
you specify a thunk the same way no matter which set of things are
getting retpolines.
I really want to keep this nicely isolated from end users and just an
LLVM implementation detail, so I've moved the `-mretpoline` flag in
Clang to no longer rely on a specific subtarget feature by that name and
instead to be directly handled. In some ways this is simpler, but in
order to preserve existing behavior I've had to add some fallback code
so that users who relied on merely passing -mretpoline-external-thunk
continue to get the same behavior. We should eventually remove this
I suspect (we have never tested that it works!) but I've not done that
in this patch.
Differential Revision: https://reviews.llvm.org/D51150
llvm-svn: 340515
Summary:
Reorganize WebAssemblyInstrSIMD.td to put all of the instruction
definitions together, making it easier to see which instructions have
been implemented already. Depends on D51143.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51113
llvm-svn: 340504
Summary:
WebAssemblyInstrFormats.td retains only multiclasses that are used in
multiple other tablegen files.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51143
llvm-svn: 340503
Previously we asumed a vector reduction add is part of a loop and one of the input is a phi. But the code in SelectionDAGBuilder that sets vector reduction flag handles more cases than that. It just requires that the use chain ends in a horizontal reduction. And there are no other uses. This means it can handle unrolled reduction loops.
If the initial value of the reduction was 0, an unrolled loop would begin with a vector reduction add that has two sad inputs. Previously we would only transform one side of the add, but for this case we need to transform both sides.
I've created a lambda to reuse some of the code for both sides. And fixed the variables names to remove reference to "phi".
Differential Revision: https://reviews.llvm.org/D50817
llvm-svn: 340478
Summary:
This CL adds support for arbitrary BUILD_VECTORS, i.e. not splats and
not consts. This is the last feature needed to properly lower v2i64
multiplies without a i64x2.mul instruction (which is not in the spec),
so i64x2.mul is removed as well.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51082
Remove unnecessary condition and fix whitespace
llvm-svn: 340472
The inline sequence is very long (about 70 bytes on Thumb1), so it's
not really a good idea to inline it, especially when optimizing for
size.
Differential Revision: https://reviews.llvm.org/D47917
llvm-svn: 340458
Fix bug https://bugs.llvm.org/show_bug.cgi?id=38643
In BPFAsmBackend applyFixup(), there is an assertion for FixedValue to be 0.
This may not be true, esp. for optimiation level 0.
For example, in the above bug, for the following two
static variables:
@bpf_map_lookup_elem = internal global i8* (i8*, i8*)*
inttoptr (i64 1 to i8* (i8*, i8*)*), align 8
@bpf_map_update_elem = internal global i32 (i8*, i8*, i8*, i64)*
inttoptr (i64 2 to i32 (i8*, i8*, i8*, i64)*), align 8
The static variable @bpf_map_update_elem will have a symbol
offset of 8 and a FK_SecRel_8 with FixupValue 8 will cause
the assertion if llvm is built with -DLLVM_ENABLE_ASSERTIONS=ON.
The above relocations will not exist if the program is compiled
with optimization level -O1 and above as the compiler optimizes
those static variables away. In the below error message, -O2
is suggested as this is the common practice.
Note that FixedValue = 0 in applyFixup() does exist and is valid,
e.g., for the global variable my_map in the above bug. The bpf
loader will process them properly for map_id's before loading
the program into the kernel.
The static variables, which are not optimized away by compiler,
may have FK_SecRel_8 relocation with non-zero FixedValue.
The patch removed the offending assertion and will issue
a hard error as below if the FixedValue in applyFixup()
is not 0.
$ llc -march=bpf -filetype=obj fixup.ll
LLVM ERROR: Unsupported relocation: try to compile with -O2 or above,
or check your static variable usage
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 340455
Summary:
When we don't actually have stack-allocated variables but need SP only
to support EH, we don't need to write SP back in the epilog, because we
don't bump down the stack pointer.
Reviewers: dschuff
Subscribers: jgravelle-google, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51114
llvm-svn: 340454
On Windows, movw+movt pairs with relocations are handled with a single
relocation that covers them both. Therefore we can't inject anything
between these instructions, otherwise the relocation (which in LLVM
only is treated as the movw instruction's relocation, while the movt
instruction's relocation is dropped) will end up bogus.
These instructions are bundled up until right before the constant
islands pass, making this effectively the only place that can split
them apart.
Differential Revision: https://reviews.llvm.org/D51032
llvm-svn: 340451
This avoids a potential infinite loop setting and unsetting bits in the
mask.
Reduced from a failure on the polly-aosp bot.
Differential Revision: https://reviews.llvm.org/D51066
llvm-svn: 340446
Inspired by what AArch64 does for shifts, this patch attempts to replace shift amounts with neg if we can.
This is done directly as part of isel so its as late as possible to avoid breaking some BZHI patterns since those patterns need an unmasked (32-n) to be correct.
To avoid manual load folding and custom instruction selection for the negate. I've inserted new nodes in the DAG above the shift node in topological order.
Differential Revision: https://reviews.llvm.org/D48789
llvm-svn: 340441
Summary:
There are several functions in the form of `has***` or `needs***` in
`WebAssemblyFrameLowering` and its `MachineFrameInfo` argument can be
obtained from `MachineFunction` so it is not necessarily has to be
passed from a caller. Also, it is more in line with other overriden
fuctions like `hasBP` or `hasReservedCallFrame`, which also take only
`MachineFunction` argument.
Reviewers: dschuff
Subscribers: sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51116
llvm-svn: 340438
When the key is not already in the map, the access operator[] creates an empty value and grows the map.
Resizing a map is very slow, so this needs to be avoided.
Found with csmith + asserts.
May help with
https://bugs.llvm.org/show_bug.cgi?id=25843
Patch by Tom Rix.
Differential Revision: https://reviews.llvm.org/D50780
llvm-svn: 340434
Summary:
`catch` instruction certainly has rather huge side effects and the flag
was missing. At the moment this does not change any unit tests we
currently have.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50919
llvm-svn: 340433
32-bit constant address space is declared as 6, so the
maximum number of address spaces is 6, not 5.
Fixes "LLVM ERROR: Pointer address space out of range".
v5: rename MAX_COMMON_ADDRESS to MAX_AMDGPU_ADDRESS
v4: - fix compilation issues
- fix out of bounds access
v3: use static_assert()
v2: add a very simple test for 32-bit addr space
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106630
llvm-svn: 340417
Constant and global may alias, also one rules table wasn't
ordered correctly.
Pinpointed by Matt.
v2: add a test with swapped parameters
llvm-svn: 340416
Add intrinsic isel patterns for sxtb16, sxtab16, uxtb16 and uxtab16
so that they can perform a ror.
Differential Revision: https://reviews.llvm.org/D51034
llvm-svn: 340405
This adds the plumbing for the Tiny code model for the AArch64 backend. This,
instead of loading addresses through the normal ADRP;ADD pair used in the Small
model, uses a single ADR. The 21 bit range of an ADR means that the code and
its statically defined symbols need to be within 1MB of each other.
This makes it mostly interesting for embedded applications where we want to fit
as much as we can in as small a space as possible.
Differential Revision: https://reviews.llvm.org/D49673
llvm-svn: 340397
This was hackily adding in the 4-bytes reserved for the callee's
emergency stack slot. Treat it like a normal stack allocation
so we get the correct alignment padding behavior. This fixes
an inconsistency between the caller and callee.
llvm-svn: 340396
Add patterns for unhandled CondCode enumerables:
SETEQ, SETGE, SETGT, SETLE, SETLT, SETNE.
Stated at the ISD::CondCode enum declaration:
`All of these (except for the 'always folded ops')
should be handled for floating point.`
Add patterns which use these nodes, same as corresponding
'ordered' CondCode nodes.
Referring to 'Ordered means that neither operand is a QNAN'
we assume it is safe to match ex. SETLT node to the same
instruction as SETOLT.
Differential Revision: https://reviews.llvm.org/D50757
llvm-svn: 340392
Summary: We now write back not to memory but to __stack_pointer global.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51074
llvm-svn: 340372
In general we can't assume flat loads are uniform, and cases where we can prove
they are should be handled through infer-address-spaces.
Differential Revision: https://reviews.llvm.org/D50991
llvm-svn: 340343
Summary:
After the stack is unwound due to a thrown exception, the
`__stack_pointer` global can point to an invalid address. This inserts
instructions that restore `__stack_pointer` global.
Reviewers: jgravelle-google, dschuff
Subscribers: mgorny, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50980
llvm-svn: 340339
Summary:
This CL implements v128.const for each vector type. New operand types
are added to ensure the vector contents can be serialized without LEB
encoding. Tests are added for instruction selection, encoding,
assembly and disassembly.
Reviewers: aheejin, dschuff, aardappel
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50873
llvm-svn: 340336
Summary: SP is now a __stack_pointer global and not a memory address anymore.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51046
llvm-svn: 340328
Summary:
So far, `isReturn` property is used to mean both a return instruction
from a functon and the end of an EH scope, a scope that starts with a EH
scope entry BB and ends with a catchret or a cleanupret instruction.
Because WinEH uses funclets, all EH-scope-ending instructions are also
real return instruction from a function. But for wasm, they only serve
as the end marker of an EH scope but not a return instruction that
exits a function. This mismatch caused incorrect prolog and epilog
generation in wasm EH scopes. This patch fixes this.
This patch is in the same vein with rL333045, which splits
`MachineBasicBlock::isEHFuncletEntry` into `isEHFuncletEntry` and
`isEHScopeEntry`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50653
llvm-svn: 340325
Most of these shifts are extended to vXi16 so we don't gain anything from forcing another round of generic shift lowering - we know these extended cases are legal constant splat shifts.
llvm-svn: 340307
Summary: When run under llvm-mc-disassemble-fuzzer, there is no symbol lookup callback so tryAddingSymbolicOperand() must fail gracefully instead of crashing
Reviewers: aemerson, javed.absar
Reviewed By: aemerson
Subscribers: lhames, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D51005
llvm-svn: 340287
Summary:
Previously the new llvm.amdgcn.raw/struct.buffer.load/store intrinsics
only allowed float types for the data to be loaded or stored, which
sometimes meant the frontend needed to generate a bitcast. In this, the
new intrinsics copied the old buffer intrinsics.
This commit extends the new intrinsics to allow int types as well.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D50315
Change-Id: I8202af2d036455553681dcbb3d7d32ae273f8f85
llvm-svn: 340270
Summary:
This commit adds new intrinsics
llvm.amdgcn.raw.buffer.load
llvm.amdgcn.raw.buffer.load.format
llvm.amdgcn.raw.buffer.load.format.d16
llvm.amdgcn.struct.buffer.load
llvm.amdgcn.struct.buffer.load.format
llvm.amdgcn.struct.buffer.load.format.d16
llvm.amdgcn.raw.buffer.store
llvm.amdgcn.raw.buffer.store.format
llvm.amdgcn.raw.buffer.store.format.d16
llvm.amdgcn.struct.buffer.store
llvm.amdgcn.struct.buffer.store.format
llvm.amdgcn.struct.buffer.store.format.d16
llvm.amdgcn.raw.buffer.atomic.*
llvm.amdgcn.struct.buffer.atomic.*
with the following changes from the llvm.amdgcn.buffer.*
intrinsics:
* there are separate raw and struct versions: raw does not have an
index arg and sets idxen=0 in the instruction, and struct always sets
idxen=1 in the instruction even if the index is 0, to allow for the
fact that gfx9 does bounds checking differently depending on whether
idxen is set;
* there is a combined cachepolicy arg (glc+slc)
* there are now only two offset args: one for the offset that is
included in bounds checking and swizzling, to be split between the
instruction's voffset and immoffset fields, and one for the offset
that is excluded from bounds checking and swizzling, to go into the
instruction's soffset field.
The AMDISD::BUFFER_* SD nodes always have an index operand, all three
offset operands, combined cachepolicy operand, and an extra idxen
operand.
The obsolescent llvm.amdgcn.buffer.* intrinsics continue to work.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50306
Change-Id: If897ea7dc34fcbf4d5496e98cc99a934f62fc205
llvm-svn: 340269
Summary:
This commit adds new intrinsics
llvm.amdgcn.raw.tbuffer.load
llvm.amdgcn.struct.tbuffer.load
llvm.amdgcn.raw.tbuffer.store
llvm.amdgcn.struct.tbuffer.store
with the following changes from the llvm.amdgcn.tbuffer.* intrinsics:
* there are separate raw and struct versions: raw does not have an index
arg and sets idxen=0 in the instruction, and struct always sets
idxen=1 in the instruction even if the index is 0, to allow for the
fact that gfx9 does bounds checking differently depending on whether
idxen is set;
* there is a combined format arg (dfmt+nfmt)
* there is a combined cachepolicy arg (glc+slc)
* there are now only two offset args: one for the offset that is
included in bounds checking and swizzling, to be split between the
instruction's voffset and immoffset fields, and one for the offset
that is excluded from bounds checking and swizzling, to go into the
instruction's soffset field.
The AMDISD::TBUFFER_* SD nodes always have an index operand, all three
offset operands, combined format operand, combined cachepolicy operand,
and an extra idxen operand.
The tbuffer pseudo- and real instructions now also have a combined
format operand.
The obsolescent llvm.amdgcn.tbuffer.* and llvm.SI.tbuffer.store
intrinsics continue to work.
V2: Separate raw and struct intrinsics.
V3: Moved extract_glc and extract_slc defs to a more sensible place.
V4: Rebased on D49995.
V5: Only two separate offset args instead of three.
V6: Pseudo- and real instructions have joint format operand.
V7: Restored optionality of dfmt and nfmt in assembler.
V8: Addressed minor review comments.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D49026
Change-Id: If22ad77e349fac3a5d2f72dda53c010377d470d4
llvm-svn: 340268
Summary:
We decided to revert this from i64 to i32 in Nov 28 CG meeting. Fixes
PR38632.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51010
llvm-svn: 340234
Due to some splat handling code in getVectorShuffle, its possible for NewV1/NewV2 to have their mask modified from what is requested. This can lead to cycles being created in the DAG.
This patch examines the returned mask and makes sure its different. Long term we may need to look closer at that splat code in getVectorShuffle, or add more splat awareness to getVectorShuffle.
Fixes PR38639
Differential Revision: https://reviews.llvm.org/D50981
llvm-svn: 340214
We can safely avoid interfering with the subus combine if both inputs are freely truncatable. Either both extends, or an extend and a constant vector.
Differential Revision: https://reviews.llvm.org/D50878
llvm-svn: 340212
getTargetCustom() requires values for "Kind" in the constructor
that are not in the PSVKind enum. Passing a value that is not inside
an enum as an argument to a constructor of the type of the enum is
UB. Changing to the underlying type of the enum would solve the UB
Differential Revision: https://reviews.llvm.org/D50909
llvm-svn: 340200
32-bit constant address space is declared as 6, so the
maximum number of address spaces is 6, not 5.
Fixes "LLVM ERROR: Pointer address space out of range".
v3: use static_assert()
v2: add a very simple test for 32-bit addr space
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106630
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 340171
This patch adds system registers for controlling aspects of SVE:
- ZCR_EL1 (r/w) visible at EL1 and EL0.
- ZCR_EL2 (r/w) visible at EL2 and Non-secure EL1 and EL0.
- ZCR_EL3 (r/w) visible at all exception levels.
and a system register identifying SVE:
- ID_AA64ZFR0_EL1 (r) SVE Feature identifier.
Reviewers: SjoerdMeijer, samparker, pbarrio, fhahn, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D50885
llvm-svn: 340158
If the arch is P8, we will select XFLOAD to load the floating point, and then, expand it to vsx and non-vsx X-form instruction post RA. This patch is trying to convert the X-form to D-form if it meets the requirement that one operand of the x-form inst is the special Zero register, and another operand fed by add inst. i.e.
y = add imm, reg
LFDX. 0, y
-->
LFD imm(reg)
Reviewers: Nemanjai
Differential Revision: https://reviews.llvm.org/D49007
llvm-svn: 340149
We were basically assuming only one operand of the compare could be an ADD node and using that to swap operands. But we can have a normal add followed by a saturing add.
This rewrites the canonicalization to just be based on the condition code.
llvm-svn: 340134
The code already support 128 and 256 and even knows to split 256 for AVX1. So we really just needed to stop looking for specific VTs and subtarget features and just look for legal VTs with i8/i16 elements.
While there, add some curly braces around outer if statement bodies that contain only another if. It makes all the closing curly braces look more regular.
llvm-svn: 340128
Extending the concept introduced in D49562, this patch lowers constant vXi8 ISD::SRL/ISD::SRA by zero/sign extending to vXi16 and using PMULLW and then truncating the high 8 bits of the result.
Differential Revision: https://reviews.llvm.org/D50781
llvm-svn: 340062
isOnlyUserOf is a little heavier because it allows the node to be used multiple times by the other node. In this case we are looking at a truncate which only has one operand so we know it can only use it once. Thus hasOneUse is better.
llvm-svn: 340059
This patch addresses:
- Implementation within PPCISelLowering.cpp to check if we should use direct
load into vector instructions (such as lxsd/lfd ) when the scalar_to_vector
function is used; which will allow us to catch as many cases of the
scalar_to_vector uses as possible to translate the ld->mtvsrd sequence into
lxsd.
- Test cases to exhibit the behaviour of emitting lxsd/lfd.
Patch by amyk
Differential revision: https://reviews.llvm.org/D49698
llvm-svn: 340037
test/CodeGen/X86/shadow-stack.ll has the following machine verifier
errors:
```
*** Bad machine code: Using a killed virtual register ***
- function: bar
- basic block: %bb.6 entry (0x7fdc81857818)
- instruction: %3:gr64 = MOV64rm killed %2:gr64, 1, $noreg, 8, $noreg
- operand 1: killed %2:gr64
*** Bad machine code: Using a killed virtual register ***
- function: bar
- basic block: %bb.6 entry (0x7fdc81857818)
- instruction: $rsp = MOV64rm killed %2:gr64, 1, $noreg, 16, $noreg
- operand 1: killed %2:gr64
*** Bad machine code: Virtual register killed in block, but needed live out. ***
- function: bar
- basic block: %bb.2 entry (0x7fdc818574f8)
Virtual register %2 is used after the block.
```
The fix here is to only copy the machine operand's register without the
kill flags for all the instructions except the very last one of the
sequence.
I had to insert dummy PHIs in the test case to force the NoPHI function
property to be set to false. More on this here: https://llvm.org/PR38439
Differential Revision: https://reviews.llvm.org/D50260
llvm-svn: 340033
This function is not virtual, it is private and it is not called anywhere. No
regression is introduced by removing it.
I think we can safely remove it.
Differential Revision: https://reviews.llvm.org/D50836
llvm-svn: 340024
QingShan Zhang