A 5-bit value can occur when EVEX.X is 0 due to it being used to extend modrm.rm to encode XMM16-31. But if modrm.rm instead encodes a GPR, the Intel documentation says EVEX.X should be ignored so just mask it to 4 bits once we know its a GPR.
llvm-svn: 333725
EVEX.X is used to extended modrm.rm when the instruction encodes a XMM/YMM/ZMM register. But we aren't properly ignoring it when it encodes a GPR and we end up printing whatever registers exist in X86 register enum after the GPRs.
llvm-svn: 333724
This was an accidental side effect of EVEX.X being used to encode XMM16-XMM31 using modrm.rm with modrm.mod==0x3.
I think there are still more bugs related to this.
llvm-svn: 333722
As part of this effort, duplicate and correct the predicates of some
aliases. Also disable code generation of some short form instructions
for FastISel, as it would otherwise reject them.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47075
llvm-svn: 333530
Previously, their listed predicates were overridden at the scope level.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46947
llvm-svn: 333405
Previously the compiler was using the microMIPSR3 variants, incorrectly.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46948
llvm-svn: 332820
This implements a new table-gen emitter to create tables for
a wasm disassembler, and a dissassembler to use them.
Comes with 2 tests, that tests a few instructions manually. Is also able to
disassemble large .wasm files with objdump reasonably.
Not working so well, to be addressed in followups:
- objdump appears to be passing an incorrect starting point.
- since the disassembler works an instruction at a time, and it is
disassembling stack instruction, it has no idea of pseudo register assignments.
These registers are required for the instruction printing code that follows.
For now, all such registers appear in the output as $0.
Patch by Wouter van Oortmerssen
Differential Revision: https://reviews.llvm.org/D45848
llvm-svn: 332052
Summary:
and use the -msgx flag as a requirement
for the SGX instructions.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D46436
llvm-svn: 331742
Previously for instructions like fxsave we would print "opaque ptr" as part of the memory operand. Now we print nothing.
We also no longer accept "opaque ptr" in the parser. We still accept any size to be specified for these instructions, but we may want to consider only parsing when no explicit size is specified. This what gas does.
llvm-svn: 331243
This allows the instruction selection to follow mode in Intel syntax. And allows a suffix to be used to change size.
This matches gas behavior from what I could tell.
llvm-svn: 331138
This encoding is recognized by the CPU, but the behavior is undefined. This makes the disassembler handle it correctly so we don't print bswapl with a 16-bit register.
llvm-svn: 330682
This demonstrates a bug where the encoding for a 16-bit bswap prints a 16-bit register and a 32-bit mnemonic. Intel docs say 16-bit bswap is undefined. We should either claim it as an invalid encoding or we should print a 16-bit mnemonic.
objdump does print the encoding as bswap with a 16-bit register. But it doesn't seem to ever print a suffix.
llvm-svn: 330621
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
llvm-svn: 330462
The destination size of the movzx/movsx instruction is controlled by the normal operand size mechanisms. Only the input type is fixed.
This means that a 0x66 prefix on the encoding for zext/sext 16->32 should really produce a 16->16 instruction. Functionally this is equivalent to a GR16->GR16 move since bits 16 and above will be preserved. So nothing is actually extended.
llvm-svn: 330078
Hint to hardware to move the cache line containing the
address to a more distant level of the cache without
writing back to memory.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45256
llvm-svn: 329992
Similar to the wbinvd instruction, except this
one does not invalidate caches. Ring 0 only.
The encoding matches a wbinvd instruction with
an F3 prefix.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43816
llvm-svn: 329847
This patch handling:
Enable parsing of raw encodings of system registers .
Allows UNPREDICTABLE sysregs to be decoded to a raw number in the same way that disasslib does, rather than llvm crashing.
Disassemble msr/mrs with unpredictable sysregs as SoftFail.
Fix regression due to SoftFailing some encodings.
Patch by Chris Ryder
Differential revision:https://reviews.llvm.org/D43374
llvm-svn: 326803
The following set of instructions was originally planned to be added for Power 9
and so code was added to support them. However, a decision was made later on to
withdraw support for these instructions in the hardware.
xscmpnedp
xvcmpnesp
xvcmpnedp
This patch removes support for the instructions that were not added.
Differential Revision: https://reviews.llvm.org/D43641
llvm-svn: 325918
Summary:
This patch makes the decoder understand old AMD 3DNow!
instructions that have never been properly supported in the X86
disassembler, despite being supported in other subsystems. Hopefully
this should make the X86 decoder more complete with respect to binaries
containing legacy code.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits, maksfb, bruno
Differential Revision: https://reviews.llvm.org/D43311
llvm-svn: 325295
The bound instruction does not have reversed operands in gas.
Fixes PR27653.
Patch by Maya Madhavan.
Differential Revision: https://reviews.llvm.org/D43243
llvm-svn: 325178
ARMDisassembler now depends on the banked register tables in ARMUtils, so the
LLVMBuild.txt needed updating to reflect this.
Original commit mesage:
[ARM] Fix disassembly of invalid banked register moves
When disassembling banked register move instructions, we don't have an
assembly syntax for the unallocated register numbers, so we have to
return Fail rather than SoftFail. Previously we were returning SoftFail,
then crashing in the InstPrinter as we have no way to represent these
encodings in an assembly string.
This also switches the decoder to use the table-generated list of banked
registers, removing the duplicated list of encodings.
Differential revision: https://reviews.llvm.org/D43066
llvm-svn: 324606
The broken bot (clang-ppc64le-linux-multistage) is doign a shared-object build,
so I guess using lookupBankedRegByEncoding in the disassembler is a layering
violation?
llvm-svn: 324604
When disassembling banked register move instructions, we don't have an
assembly syntax for the unallocated register numbers, so we have to
return Fail rather than SoftFail. Previously we were returning SoftFail,
then crashing in the InstPrinter as we have no way to represent these
encodings in an assembly string.
This also switches the decoder to use the table-generated list of banked
registers, removing the duplicated list of encodings.
Differential revision: https://reviews.llvm.org/D43066
llvm-svn: 324600
Instructions affected:
mthc1, mfhc1, add.d, sub.d, mul.d, div.d,
mov.d, neg.d, cvt.w.d, cvt.d.s, cvt.d.w, cvt.s.d
These instructions are now defined for
microMIPS32r3 + microMIPS32r6 in MicroMipsInstrFPU.td
since they shared their encoding with those already defined
in microMIPS32r6InstrInfo.td and have been therefore
removed from the latter file.
Some instructions present in MicroMipsInstrFPU.td which
did not have both AFGR64 and FGR64 variants defined have
been altered to do so.
Differential revision: https://reviews.llvm.org/D42738
llvm-svn: 324584
This fixes bugzilla 33011
https://bugs.llvm.org/show_bug.cgi?id=33011
Defines bits {19-16} as zero or unpredictable as specified by the ARM ARM in
sections A8.8.116 and A8.8.117.
It fixes also the usage of PC register as destination register for MVN
register-shifted register version as specified in A8.8.117.
Differential Revision: https://reviews.llvm.org/D41905
llvm-svn: 323954
- Alter abs for micromips to have both AFGR64 and FGR64
variants, same as sqrt
- Remove sqrt and abs from MicroMips32r6InstrInfo.td,
use micromips FGR64 variants
- Restrict non-micromips abs/sqrt with NotInMicroMips
predicate
Differential revision: https://reviews.llvm.org/D41439
llvm-svn: 323184
While the suffix isn't required to disambiguate the instructions, it is required in order to parse the instructions when the suffix is specified in order to match the GNU assembler.
llvm-svn: 322354
This behavior existed to work with an old version of the gnu assembler on MacOS that only accepted this form. Newer versions of GNU assembler and the current LLVM derived version of the assembler on MacOS support movq as well.
llvm-svn: 321898
Previously prefetch was only considered legal if sse was enabled, but it should be supported with 3dnow as well.
The prfchw flag now imply at least some form of prefetch without the write hint is available, either the sse or 3dnow version. This is true even if 3dnow and sse are explicitly disabled.
Similarly prefetchwt1 feature implies availability of prefetchw and the the prefetcht0/1/2/nta instructions. This way we can support _MM_HINT_ET0 using prefetchw and _MM_HINT_ET1 with prefetchwt1. And its assumed that if we have levels for the write hint we would have levels for the non-write hint, thus why we enable the sse prefetch instructions.
I believe this behavior is consistent with gcc. I've updated the prefetch.ll to test all of these combinations.
llvm-svn: 321335
Implement the 'Current Cache Size' register that has been introduced
as part of the Armv8.3 architecture. I originally missed this, and
(hopefully) should be the final patch for assembler support.
Differential Revision: https://reviews.llvm.org/D41396
llvm-svn: 321155
Stores failed to decode at all since they didn't have a
DecoderNamespace set. Loads worked, but did not change
the register width displayed to match the numbmer of
enabled channels.
The number of printed registers for vaddr is still wrong,
but I don't think that's encoded in the instruction so
there's not much we can do about that.
Image atomics are still broken. MIMG is the same
encoding for SI/VI, but the image atomic classes
are split up into encoding specific versions unlike
every other MIMG instruction. They have isAsmParserOnly
set on them for some reason. dmask is also special for
these, so we probably should not have it as an explicit
operand as it is now.
llvm-svn: 320614
All files and parts of files related to microMIPS4R6 are removed.
When target is microMIPS4R6, errors are printed.
This is LLVM part of patch.
Differential Revision: https://reviews.llvm.org/D35625
llvm-svn: 320350
This adds assembly & disassembly support for the e500mc "external pid"
instructions.
See https://reviews.llvm.org/D39249.
Patch by vit9696 <vit9696@avp.su>
llvm-svn: 320287
Craig Topper