This basically reverts a change made in r336217, but improves the text of the error message for not allowing IP-relative addressing in 32-bit mode.
Fixes PR38826.
Patch by Iain Sandoe.
llvm-svn: 341512
Allow the comparison of x86 registers in the evaluation of assembler
directives. This generalizes and simplifies the extension from r334022
to catch another case found in the Linux kernel.
Reviewers: rnk, void
Reviewed By: rnk
Subscribers: hiraditya, nickdesaulniers, llvm-commits
Differential Revision: https://reviews.llvm.org/D50795
llvm-svn: 339895
This might make the error message added in r335668 unneeded, but I'm not sure yet.
The check for RIP is technically unnecessary since RIP is in GR64, but that fact is kind of surprising so be explicit.
llvm-svn: 336217
-Ensure EIP isn't used with an index reigster.
-Ensure EIP isn't used as index register.
-Ensure base register isn't a vector register.
-Ensure eiz/riz usage matches the size of their base register.
llvm-svn: 335412
This allows us to check these:
-16-bit addressing doesn't support scale so we should error if we find one there.
-Multiplying ESP/RSP by a scale even if the scale is 1 should be an error because ESP/RSP can't be an index.
llvm-svn: 335398
By default, the second register gets assigned to the index register slot. But ESP can't be an index register so we need to swap it with the other register.
There's still a slight bug that we allow [EAX+ESP*1]. The existence of the multiply even though its with 1 should force ESP to the index register and trigger an error, but it doesn't currently.
llvm-svn: 335394
The second register is the index register and should only be %si or %di if used with a base register. And in that case the base register should be %bp or %bx.
This makes us compatible with gas.
We do still need to support both orders with Intel syntax which uses [bp+si] and [si+bp]
llvm-svn: 335384
(%bp) can't be encoded without a displacement. The encoding is instead used for displacement alone. So a 1 byte displacement of 0 must be used. But if there is an index register we can encode without a displacement.
llvm-svn: 335379
We already have these aliases for EVEX enocded instructions, but not for the GPR, MMX, SSE, and VEX versions.
Also remove the vpextrw.s EVEX alias. That's not something gas implements.
llvm-svn: 334922
The .s assembly strings allow the reversed forms to be targeted from assembly which matches gas behavior. But when printing the instructions we should print them without the .s to match other tooling like objdump. By using InstAliases we can use the normal string in the instruction and just hide it from the assembly parser.
Ideally we'd add the .s versions to the legacy SSE and VEX versions as well for full compatibility with gas. Not sure how we got to state where only EVEX was supported.
llvm-svn: 334920
Unlike CodeGenInstruction, CodeGenInstAlias was flatting asm strings in its constructor. For instructions it was the users responsibility to flatten the string.
AsmMatcherEmitter didn't know this and treated them the same. This caused double flattening of InstAliases. This is mostly harmless unless the desired assembly string contains curly braces. The second flattening wouldn't know to ignore these and would remove the curly braces. And for variant 1 it would remove the contents of them as well.
To mitigate this, this patch makes removes the flattening from the CodeGenIntAlias constructor and modifies AsmWriterEmitter to account for the flattening not having been done.
llvm-svn: 334919
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Summary:
Allow extended parsing of variable assembler assignment syntax and modify X86 to permit
VAR = register assignment. As we emit these as .set directives when possible, we inline
such expressions in output assembly.
Fixes PR37425.
Reviewers: rnk, void, echristo
Reviewed By: rnk
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D47545
llvm-svn: 334022
Summary:
"Unknown" for platforms that were not manually added into the switch
did not make sense at all. Now it prints Target + addend for all
elf-machines that were not explicitly mentioned.
Addresses PR21059 and PR25124.
Original author: fedor.sergeev
Reviewers: jyknight, espindola, fedor.sergeev
Reviewed By: jyknight
Subscribers: eraman, dcederman, jfb, dschuff, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D36464
llvm-svn: 333726
Summary:
and use the -msgx flag as a requirement
for the SGX instructions.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D46436
llvm-svn: 331742
Previously for instructions like fxsave we would print "opaque ptr" as part of the memory operand. Now we print nothing.
We also no longer accept "opaque ptr" in the parser. We still accept any size to be specified for these instructions, but we may want to consider only parsing when no explicit size is specified. This what gas does.
llvm-svn: 331243
This allows the instruction selection to follow mode in Intel syntax. And allows a suffix to be used to change size.
This matches gas behavior from what I could tell.
llvm-svn: 331138
It doesn't really exist. The instruction always writes 16-bits of memory. Putting a REX.w on it won't change anything.
While I was touching the encoding tests to remove it, I added some other missing register form test cases.
llvm-svn: 331135
Favor the 0x1a encoding for register/register move to match gas.
The instructions used RM and MR in their name along with rr/rm/mr at the end. To make more consistent with other instructions remove the RM/MR and use rr/rm/mr/rr_REV.
Hide the _REV encoding from the assembler but leave it for the disassembler.
llvm-svn: 331101
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
llvm-svn: 330462
Hint to hardware to move the cache line containing the
address to a more distant level of the cache without
writing back to memory.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45256
llvm-svn: 329992
Similar to the wbinvd instruction, except this
one does not invalidate caches. Ring 0 only.
The encoding matches a wbinvd instruction with
an F3 prefix.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43816
llvm-svn: 329847
X86 Supports Indirect Branch Tracking (IBT) as part of Control-Flow Enforcement Technology (CET).
IBT instruments ENDBR instructions used to specify valid targets of indirect call / jmp.
The `nocf_check` attribute has two roles in the context of X86 IBT technology:
1. Appertains to a function - do not add ENDBR instruction at the beginning of the function.
2. Appertains to a function pointer - do not track the target function of this pointer by adding nocf_check prefix to the indirect-call instruction.
This patch implements `nocf_check` context for Indirect Branch Tracking.
It also auto generates `nocf_check` prefixes before indirect branchs to jump tables that are guarded by range checks.
Differential Revision: https://reviews.llvm.org/D41879
llvm-svn: 327767
llvm-mc can crash when
there is cfi_startproc without cfi_end_proc:
.text
.globl foo
foo:
.cfi_startproc
Testcase shows the issue, patch fixes it.
Differential revision: https://reviews.llvm.org/D43456
llvm-svn: 325564
NFC.
Adding MC regressions tests to cover the CET instructions.
This patch is part of a larger task to cover MC encoding of all X86 isa sets started in revision: https://reviews.llvm.org/D39952
Reviewers: zvi, craig.topper, RKSimon, AndreiGrischenko, oren_ben_simhon
Differential Revision: https://reviews.llvm.org/D41329
Change-Id: I9c133d4ba07508ce8fd738a1230edd586e2c2f1b
llvm-svn: 325561
The bound instruction does not have reversed operands in gas.
Fixes PR27653.
Patch by Maya Madhavan.
Differential Revision: https://reviews.llvm.org/D43243
llvm-svn: 325178
In the rare case where the input contains rip-relative addressing with
immediate displacements, *and* the instruction ends with an immediate,
we encode the instruction in the wrong way:
movl $12345678, 0x400(%rdi) // all good, no rip-relative addr
movl %eax, 0x400(%rip) // all good, no immediate at the end of the instruction
movl $12345678, 0x400(%rip) // fails, encodes address as 0x3fc(%rip)
Offset is a label:
movl $12345678, foo(%rip)
we want to account for the size of the immediate (in this case,
$12345678, 4 bytes).
Offset is an immediate:
movl $12345678, 0x400(%rip)
we should not account for the size of the immediate, assuming the
immediate offset is what the user wanted.
Differential Revision: https://reviews.llvm.org/D43050
llvm-svn: 324772
NFC.
Adding MC regressions tests to cover several small x86 extensions as follows:
CLWB, CLZERO, F16C, INVPCID, PKU, POPCNT, RTM, SGX, SHA, SVM, VMFUNC, VTX
This patch is part of a larger task to cover MC encoding of all X86 isa sets started in revision: https://reviews.llvm.org/D39952
Reviewers: RKSimon, craig.topper, zvi, AndreiGrischenko
Differential Revision: https://reviews.llvm.org/D41388
Change-Id: I254508cd17faca00b780be0fc2abf6c71b61faab
llvm-svn: 324595
Summary:
We should always be able to accept AVX512 registers and instructions in llvm-mc. The only subtarget mode that should be checked is 16-bit vs 32-bit vs 64-bit mode.
I've also removed all the mattr/mcpu lines from test RUN lines to be consistent with this. Most were due to AVX512, but a few were for other features.
Fixes PR36202
Reviewers: RKSimon, echristo, bkramer
Reviewed By: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42824
llvm-svn: 324106
Craig Topper