getCanonicalArchName can return an empty string for an architecture
that is well-formed but meaningless. Use parseArch to determine if
it's actually valid or not.
Differential Revision: http://reviews.llvm.org/D10120
llvm-svn: 238553
This isn't an actual revert of r237769, it just restores the behavior of
the Clang driver prior to it while completely re-implementing how that
behavior works.
This also re-does the work of making the default OpenMP runtime
selectable at CMake (or configure) time to work in the way all of our
other such hooks do (config.h, configure and cmake hooks, etc.).
I've re-implemented how we manage the '-fopenmp' flagset in an important
way. Now, the "default" hook just makes '-fopenmp' equivalent to
'-fopenmp=<default>' rather than a separate special beast. Also, there
is an '-fno-openmp' flag which does the obvious thing. Also, the code is
shared between all the places to select a known OpenMP runtime and act
on it.
Finally, and most significantly, I've taught the driver to inspect the
selected runtime when choosing whether to propagate the '-fopenmp' flag
to the frontend in the CC1 commandline. Without this, it isn't possible
to use Clang with libgomp, even if you were happy with the serial,
boring way in which it worked previously (ignoring all #pragmas but
linking in the library to satisfy direct calls into the runtime).
While I'm here, I've gone ahead and sketched out a path for the future
name of LLVM's OpenMP runtime (libomp) and the legacy support for its
current name (libiomp5) in what seems a more reasonable way.
To re-enable LLVM's OpenMP runtime (which I think should wait until the
normal getting started instructions are a reasonable way for falks to
check out, build, and install Clang with the runtime) all that needs to
change is the default string in the CMakeLists.txt and configure.ac
file. No code changes necessary.
I also added a test for the driver's behavior around OpenMP since it was
*completely missing* previously. Makes it unsurprising that we got it
wrong.
llvm-svn: 238389
Using the target cpu to determine some behaviour is sprinkled in
several places in the driver, but in almost all the information that
is needed can be found in the triple. Restructure things so that the
triple is used, and the cpu is only used if the exact cpu name is
needed.
Also add a check that the -mcpu argument is valid, and correct the
-march argument checking so that it handles -march=native correctly. I
would have liked to move these checks into the computation of the
triple, but the triple is calculated several times in several places
and that would lead to multiple error messages for the same thing.
Differential Revision: http://reviews.llvm.org/D9879
llvm-svn: 237894
-fopenmp turns on OpenMP support and links libiomp5 as OpenMP library. Also there is -fopenmp={libiomp5|libgomp} option that allows to override effect of -fopenmp and link libgomp library (if -fopenmp=libgomp is specified).
Differential Revision: http://reviews.llvm.org/D9736
llvm-svn: 237769
sys/time.h on Solaris (and possibly other systems) defines "SEC" as "1"
using a cpp macro. The result is that this fails to compile.
Fixes https://llvm.org/PR23482
llvm-svn: 237113
Compiler-rt's Profiling library isn't part of the stdlib, so -nostdlib
shouldn't prevent it from being linked. This makes Darwin behave like
other toolchains, and link in the profile runtime irrespective of
-nostdlib, since the resulting program can't be run unless you link
this.
I've also added a test to show that other toolchains already behave
like this.
llvm-svn: 237074
This is a starting point for using the TargetParser in Clang, in a simple
enough part of the code that can be used without disrupting the crazy
platform support that we need to be compatible with other toolchains.
Also adding a few FIXME on obvious places that need replacing, but those
cases will indeed break a few of the platform assumptions, as arch/cpu names
change multiple times in the driver.
Finally, I'm changing the "neon-vfpv3" behaviour to match standard NEON, since
-mfpu=neon implies vfpv3 by default in both Clang and LLVM. That option
string is still supported as an alias to "neon".
llvm-svn: 236901
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -mcpu option.
Patch by Gabor Ballabas.
llvm-svn: 236859
llvm::Triple::getARMCPUForArch now returns nullptr for invalid -march
values, instead of silently translating it to arm7tdmi. Use this to
give an error message, which is consistent with how gcc behaves.
Differential Revision: http://reviews.llvm.org/D9602
llvm-svn: 236846
This patch adds support for the z13 architecture type. For compatibility
with GCC, a pair of options -mvx / -mno-vx can be used to selectively
enable/disable use of the vector facility.
When the vector facility is present, we default to the new vector ABI.
This is characterized by two major differences:
- Vector types are passed/returned in vector registers
(except for unnamed arguments of a variable-argument list function).
- Vector types are at most 8-byte aligned.
The reason for the choice of 8-byte vector alignment is that the hardware
is able to efficiently load vectors at 8-byte alignment, and the ABI only
guarantees 8-byte alignment of the stack pointer, so requiring any higher
alignment for vectors would require dynamic stack re-alignment code.
However, for compatibility with old code that may use vector types, when
*not* using the vector facility, the old alignment rules (vector types
are naturally aligned) remain in use.
These alignment rules are not only implemented at the C language level,
but also at the LLVM IR level. This is done by selecting a different
DataLayout string depending on whether the vector ABI is in effect or not.
Based on a patch by Richard Sandiford.
llvm-svn: 236531
This change is the third of 3 patches to add support for specifying
the profile output from the command line via -fprofile-instr-generate=<path>,
where the specified output path/file will be overridden by the
LLVM_PROFILE_FILE environment variable.
This patch adds the necessary support to the clang frontend, and adds a
new test.
The compiler-rt and llvm parts are r236055 and r236288, respectively.
Patch by Teresa Johnson. Thanks!
llvm-svn: 236289
For now tsan_cxx and msan_cxx contain only operator new/delete
replacements. In the future, when we add support for running UBSan+TSan
and UBSan+MSan, they will also contain bits ubsan_cxx runtime.
llvm-svn: 235924
NMake is a Make-like builder that comes with Microsoft Visual Studio.
Jom (https://wiki.qt.io/Jom) is an NMake-compatible build tool.
Dependency files for NMake/Jom need to use double-quotes to wrap
filespecs containing special characters, instead of the backslash
escapes that GNU Make wants.
Adds the -MV option, which specifies to use double-quotes as needed
instead of backslash escapes when writing the dependency file.
Differential Revision: http://reviews.llvm.org/D9260
llvm-svn: 235903
Stop relying on `cl::opt` to pass along the driver's decision to
preserve use-lists. Create a new `-cc1` option called
`-emit-llvm-uselists` that does the right thing (when -emit-llvm-bc).
Note that despite its generic name, it *doesn't* do the right thing when
-emit-llvm (LLVM assembly) yet. I'll hook that up soon.
This doesn't really change the behaviour of the driver. The default is
still to preserve use-lists for `clang -emit-llvm` and `clang
-save-temps`, and nothing else. But it stops relying on global state
(and also is a nicer interface for hackers using `clang -cc1`).
llvm-svn: 234962
Change `clang` to set `-preserve-bc-uselistorder` for the driver options
`-emit-llvm` and `-save-temps`. The former is useful for reproducing
results from `clang` in `opt` or `llc`, while the latter prevents
`-save-temps` from affecting the output. This is part of PR5680.
`-preserve-bc-uselistorder=true` is currently on by default, but a
follow-up commit in LLVM will reverse it.
llvm-svn: 234920
This patch generates a warning for invalid combination of '-mnan' and
'-march' options, it properly sets NaN encoding for a given '-march',
and it passes a proper NaN encoding to the assembler.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D8170
llvm-svn: 234882
Follow-up to r234666. With this, the -m[no-]global-merge options
have the expected behavior. Previously, -mglobal-merge was ignored,
and there was no way of enabling the optimization.
llvm-svn: 234668
Summary:
tools::arm::getARMFloatABI() was falling back to guessing soft-float because
it wasn't seeing the GNUEABIHF environment from ComputeEffectivClangTriple
when it was called from gnutools::Assemble::ConstructJob.
Fix by using the effective clang triple in gnutools::Assemble, which now
matches the -triple flag used by cc1 and ClangAs jobs.
Reviewers: jvoung
Subscribers: rengolin, jfb, aemerson, cfe-commits
Differential Revision: http://reviews.llvm.org/D8902
llvm-svn: 234661
The driver currently accepts but ignores the -freciprocal-math flag.
This patch passes the flag through and enables 'arcp' fast-math-flag
generation in IR.
Note that this change does not actually enable the optimization for
any target. The reassociation optimization that this flag specifies
was implemented by http://reviews.llvm.org/D6334 :
http://llvm.org/viewvc/llvm-project?view=revision&revision=222510
Because the optimization is done in the backend rather than IR,
the backend must be modified to understand instruction-level
fast-math-flags or a new function-level attribute must be created.
Also note that -freciprocal-math is independent of any target-specific
usage of reciprocal estimate hardware instructions. That requires
its own flag ('-mrecip').
https://llvm.org/bugs/show_bug.cgi?id=20912
llvm-svn: 234493
Adds ARM Cortex-R4 and R4F support and tests in Clang. Though Cortex-R4
support was present, the support for hwdiv in thumb-mode was not defined
or tested properly. This has also been added.
llvm-svn: 234488
Original message:
Don't use unique section names by default if using the integrated as.
This saves some IO and ccache space by not creating long section names. It
should work with every ELF linker.
llvm-svn: 234143
This reverts commit r233398, bringing back 233393 now that LLVM is fixed.
Original message:
Don't use unique section names by default if using the integrated as.
This saves some IO and ccache space by not creating long section names. It
should work with every ELF linker.
llvm-svn: 234101
Summary:
Change the way we use ASan and UBSan together. Instead of keeping two
separate runtimes (libclang_rt.asan and libclang_rt.ubsan), embed UBSan
into ASan and get rid of libclang_rt.ubsan. If UBSan is not supported on
a platform, all UBSan sources are just compiled into dummy empty object
files. UBSan initialization code (e.g. flag parsing) is directly called
from ASan initialization, so we are able to enforce correct
initialization order.
This mirrors the approach we already use for ASan+LSan. This change doesn't
modify the way we use standalone UBSan.
Test Plan: regression test suite
Reviewers: kubabrecka, zaks.anna, kcc, rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D8645
llvm-svn: 233860
The zEC12 provides the transactional-execution facility. This is exposed
to users via a set of builtin routines on other compilers. This patch
adds clang support to enable those builtins. In partciular, the patch:
- enables the transactional-execution feature by default on zEC12
- allows to override presence of that feature via the -mhtm/-mno-htm options
- adds a predefined macro __HTM__ if the feature is enabled
- adds support for the transactional-execution GCC builtins
- adds Sema checking to verify the __builtin_tabort abort code
- adds the s390intrin.h header file (for GCC compatibility)
- adds s390 sections to the htmintrin.h and htmxlintrin.h header files
Since this is first use of target-specific intrinsics on the platform,
the patch creates the include/clang/Basic/BuiltinsSystemZ.def file and
hooks it up in TargetBuiltins.h and lib/Basic/Targets.cpp.
An associated LLVM patch adds the required LLVM IR intrinsics.
For reference, the transactional-execution instructions are documented
in the z/Architecture Principles of Operation for the zEC12:
http://publibfp.boulder.ibm.com/cgi-bin/bookmgr/download/DZ9ZR009.pdf
The associated builtins are documented in the GCC manual:
http://gcc.gnu.org/onlinedocs/gcc/S_002f390-System-z-Built-in-Functions.html
The htmxlintrin.h intrinsics provided for compatibility with the IBM XL
compiler are documented in the "z/OS XL C/C++ Programming Guide".
llvm-svn: 233804
This is necessary because not aall Sandybridge, Ivybrige, Haswell, and Broadwell CPUs support AVX. Currently we modify the CPU name back to Nehalem for this case, but that turns off additional features for these CPUs.
llvm-svn: 233672
Add Tool and ToolChain support for clang to target the NaCl OS using the NaCl
SDK for x86-32, x86-64 and ARM.
Includes nacltools::Assemble and Link which are derived from gnutools. They
are similar to Linux but different enought that they warrant their own class.
Also includes a NaCl_TC in ToolChains derived from Generic_ELF with library
and include paths suitable for an SDK and independent of the system tools.
Differential Revision: http://reviews.llvm.org/D8590
llvm-svn: 233594
Unlike most of the other platforms supported by Clang, CloudABI only
supports static linkage, for the reason that global filesystem access is
prohibited. Functions provided by dlfcn.h are not present. As we know
that applications will not try to do any symbol lookups at run-time, we
can garbage collect unused code quite aggressively. Because of this, it
makes sense to enable -ffunction-sections and -fdata-sections by
default.
Object files will be a bit larger than usual, but the resulting binary
will not be affected, as the sections are merged again. However, when
--gc-sections is used, the linker is able to remove unused code far more
more aggressively. It also has the advantage that transitive library
dependencies only need to be provided to the linker in case that
functionality is actually used.
Differential Revision: http://reviews.llvm.org/D8635
Reviewed by: echristo
llvm-svn: 233299
Now that CloudABI's target information and header search logic for Clang
has been submitted, the only thing that remains to be done is adding
support for CloudABI's linker.
CloudABI uses Binutils ld, although there is some work to use lld
instead. This means that this code is largely based on what we use on
FreeBSD. There are some exceptions, however:
- Only static linking is performed. CloudABI does not support any
dynamically linked executables.
- CloudABI uses compiler-rt, libc++ and libc++abi unconditionally. Link
in these libraries instead of using libgcc_s, libstdc++, etc.
- We must ensure that the .eh_frame_hdr is present to make C++
exceptions work properly.
Differential Revision: http://reviews.llvm.org/D8250
llvm-svn: 233269
Get rid of "libclang_rt.san" library that used to contain
sanitizer_common pieces required by UBSan if it's used in a standalone
mode. Instead, build two variants of UBSan runtime: "ubsan" and
"ubsan_standalone" (same for "ubsan_cxx" and "ubsan_standalone_cxx").
Later "ubsan" and "ubsan_cxx" libraries will go away, as they will
embedded it into corresponding ASan runtimes.
llvm-svn: 233010
Decide whether or not to use thread-safe statics depending on whether or
not we have an explicit request from the driver. If we don't have an
explicit request, infer which behavior to use depending on the
compatibility version we are targeting.
N.B. CodeGen support is still ongoing.
llvm-svn: 232906
There are no widely deployed standard libraries providing sized
deallocation functions, so we have to punt and ask the user if they want
us to use sized deallocation. In the future, when such libraries are
deployed, we can teach the driver to detect them and enable this
feature.
N3536 claimed that a weak thunk from sized to unsized deallocation could
be emitted to avoid breaking backwards compatibility with standard
libraries not providing sized deallocation. However, this approach and
other variations don't work in practice.
With the weak function approach, the thunk has to have default
visibility in order to ensure that it is overridden by other DSOs
providing sized deallocation. Weak, default visibility symbols are
particularly expensive on MachO, so John McCall was considering
disabling this feature by default on Darwin. It also changes behavior
ELF linking behavior, causing certain otherwise unreferenced object
files from an archive to be pulled into the link.
Our second approach was to use an extern_weak function declaration and
do an inline conditional branch at the deletion call site. This doesn't
work because extern_weak only works on MachO if you have some archive
providing the default value of the extern_weak symbol. Arranging to
provide such an archive has the same challenges as providing the symbol
in the standard library. Not to mention that extern_weak doesn't really
work on COFF.
Reviewers: rsmith, rjmccall
Differential Revision: http://reviews.llvm.org/D8467
llvm-svn: 232788
Now that SmallString is a first-class citizen, most SmallString::str()
calls are not required. This patch removes a whole bunch of them, yet
there are lots more.
There are two use cases where str() is really needed:
1) To use one of StringRef member functions which is not available in
SmallString.
2) To convert to std::string, as StringRef implicitly converts while
SmallString do not. We may wish to change this, but it may introduce
ambiguity.
llvm-svn: 232622
Summary: As discussed in D8097, we should provide corresponding linking flags when 'fveclib' is specified.
Reviewers: hfinkel
Differential Revision: http://reviews.llvm.org/D8362
llvm-svn: 232556
ARMv6K is another layer between ARMV6 and ARMV6T2. This is the Clang
side of the changes.
ARMV6 family LLVM implementation.
+-------------------------------------+
| ARMV6 |
+----------------+--------------------+
| ARMV6M (thumb) | ARMV6K (arm,thumb) | <- From ARMV6K and ARMV6M processors
+----------------+--------------------+ have support for hint instructions
| ARMV6T2 (arm,thumb,thumb2) | (SEV/WFE/WFI/NOP/YIELD). They can
+-------------------------------------+ be either real or default to NOP.
| ARMV7 (arm,thumb,thumb2) | The two processors also use
+-------------------------------------+ different encoding for them.
Patch by Vinicius Tinti.
llvm-svn: 232469
Support for the QPX vector instruction set, used on the IBM BG/Q supercomputer,
has recently been added to the LLVM PowerPC backend. This vector instruction
set requires some ABI modifications because the ABI on the BG/Q expects
<4 x double> vectors to be provided with 32-byte stack alignment, and to be
handled as native vector types (similar to how Altivec vectors are handled on
mainline PPC systems). I've named this ABI variant elfv1-qpx, have made this
the default ABI when QPX is supported, and have updated the ABI handling code
to provide QPX vectors with the correct stack alignment and associated
register-assignment logic.
llvm-svn: 231960
simplicity in build systems, silence '-stdlib=libc++' when linking. Even
if we're not linking C++ code per-se, we may be passing this flag so
that when we are linking C++ code we pick up the desired standard
library. While most build systems already provide separate C and C++
compile flags, many conflate link flags. Sadly, CMake is among them
causing this warning in a libc++ selfhost.
llvm-svn: 231559
Summary:
There is no -no-pie flag that can override this, so making it default
to being on for Android means it is no longer possible to create
non-PIE executables on Android. While current versions of Android
support (and the most recent requires) PIE, ICS and earlier versions
of Android cannot run PIE executables, so this needs to be optional.
Reviewers: srhines
Reviewed By: srhines
Subscribers: thakis, volkalexey, cfe-commits
Differential Revision: http://reviews.llvm.org/D8015
llvm-svn: 231091
As Chandler responded on the initial commit, just directly setting the
triple through -Xclang option to the driver creates havoc on other
platforms. The driver test should specifically go into test/Driver and
test the cc1 commandline itself.
llvm-svn: 231063
This adds the -fapplication-extension option, along with the
ios_app_extension and macosx_app_extension availability attributes.
Patch by Ted Kremenek
llvm-svn: 230989
Currently -fms-extensions controls this behavior, which doesn't make
much sense. It means we can't identify what is and isn't a system header
when compiling our own preprocessed output, because #line doesn't
represent this information.
If someone is feeding Clang's preprocessed output to another compiler,
they can use this flag.
Fixes PR20553.
Reviewers: rsmith
Differential Revision: http://reviews.llvm.org/D5217
llvm-svn: 230587
VS 2013 is the minimum supported version, so it's reasonable for Clang
to simulate this by default. This also simplifies the clang-cl
self-host, since we have the 18.00 version check.
llvm-svn: 230243
The patch teaches the clang's driver to understand new MIPS ISA names,
pass appropriate options to the assembler, defines corresponding macros etc
http://reviews.llvm.org/D7737
llvm-svn: 230092
This patch introduces the -fsanitize=cfi-vptr flag, which enables a control
flow integrity scheme that checks that virtual calls take place using a vptr of
the correct dynamic type. More details in the new docs/ControlFlowIntegrity.rst
file.
It also introduces the -fsanitize=cfi flag, which is currently a synonym for
-fsanitize=cfi-vptr, but will eventually cover all CFI checks implemented
in Clang.
Differential Revision: http://reviews.llvm.org/D7424
llvm-svn: 230055
For now -funique-section-names is the default, so no change in default behavior.
The total .o size in a build of llvm and clang goes from 241687775 to 230649031
bytes if -fno-unique-section-names is used.
llvm-svn: 230031
If this flag is set, we error out when a module build is required. This is
useful in environments where all required modules are passed via -fmodule-file.
llvm-svn: 230006
This patch removes the huge blob of code that is dealing with
rtti/exceptions/sanitizers and replaces it with:
A ToolChain function which, for a given set of Args, figures out if rtti
should be:
- enabled
- disabled implicitly
- disabled explicitly
A change in the way SanitizerArgs figures out what sanitizers to enable
(or if it should error out, or warn);
And a check for exceptions/rtti interaction inside addExceptionArgs.
The RTTIMode algorithm is:
- If -mkernel, -fapple-kext, or -fno-rtti are passed, rtti was disabled explicitly;
- If -frtti was passed or we're not targetting the PS4, rtti is enabled;
- If -fexceptions or -fcxx-exceptions was passed and we're targetting
the PS4, rtti was enabled implicitly;
- If we're targetting the PS4, rtti is disabled implicitly;
- Otherwise, rtti is enabled;
Since the only flag needed to pass to -cc1 is -fno-rtti if we want to
disable it, there's no problem in saying rtti is enabled if we're
compiling C code, so we don't look at the input file type.
addExceptionArgs now looks at the RTTIMode and warns that rtti is being
enabled implicitly if targetting the PS4 and exceptions are on. It also
errors out if, targetting the PS4, -fno-rtti was passed, and exceptions
were turned on.
SanitizerArgs now errors out if rtti was disabled explicitly and the vptr
sanitizer was enabled implicitly, but just turns off vptr if rtti is
disabled but -fsanitize=undefined was passed.
Also fixed tests, removed duplicate name from addExceptionArgs comment,
and added one or two surrounding lines when running clang-format.
This changes test/Driver/fsanitize.c to make it not expect a warning when
passed -fsanitize=undefined -fno-rtti, but expect vptr to not be on.
Removed all users and definition of SanitizerArgs::sanitizesVptr().
Reviewers: samsonov
Subscribers: llvm-commits, samsonov, rsmith
Differential Revision: http://reviews.llvm.org/D7525
llvm-svn: 229801
Add some of the missing M and R class Cortex CPUs, namely:
Cortex-M0+ (called Cortex-M0plus for GCC compatibility)
Cortex-M1
SC000
SC300
Cortex-R5
llvm-svn: 229661
The /volatile:ms semantics turn volatile loads and stores into atomic
acquire and release operations. This distinction is important because
volatile memory operations do not form a happens-before relationship
with non-atomic memory. This means that a volatile store is not
sufficient for implementing a mutex unlock routine.
Differential Revision: http://reviews.llvm.org/D7580
llvm-svn: 229082
Summary:
-iframework option is used to specified System framework path so the
path specified should be passed to linker as -F option
rdar://problem/18234544
Reviewers: bob.wilson
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D7106
llvm-svn: 228413
After r228258, Clang started emitting C++ EH IR that LLVM wasn't ready
to deal with, even when exceptions were disabled with /EHs-. This time,
make /EHs- turn off -fexceptions while still emitting exceptional
constructs in functions using __try. Since Sema rejects C++ exception
handling constructs before CodeGen, landingpads should only appear in
such functions as the result of a __try.
llvm-svn: 228329
In r227480, Ulrich Weigand introduced a workaround for a linker
optimization bug that can create mis-optimized code for accesses to
general-dynamic or local-dynamic TLS variables. The linker
optimization bug only occurred for Clang/LLVM because of some
inefficient code being generated for these TLS accesses. I have
recently corrected LLVM to produce the efficient code sequence
expected by the linkers, so this workaround is no longer needed.
Therefore this patch reverts r227480.
I've tested that the previous bootstrap failure no longer occurs with
the workaround reverted.
llvm-svn: 228253
Previously, we would use a frame pointer by default on non-Linux OSs. On
Linux, any optimization flags imply -fomit-frame-pointer. XCore always
defaulted to -fomit-frame-pointer.
Now x86 Windows matches our behavior on Linux. All other ISAs supported
by Windows (ARM, x64) use xdata information, and frame pointers aren't
useful. Frame pointers are now off by default for such targets, but can
be forced via -fno-omit-frame-pointer and code using alloca().
In fact, on Win64 our frame-pointer prologue is not describable with
UNWIND_INFO. This change is a workaround to avoid using the broken FP
using prologue for most functions. This is PR22467.
llvm-svn: 228236
Appends the username to the first component (after the temp dir) of the
module cache path. If the username contains a character that shouldn't
go into a path (for now conservatively allow [a-zA-Z0-9_]), we fallback
to the user id.
llvm-svn: 228013
-save-temps=cwd is equivalent to -save-temps
-save-temps=obj saves temporary file in the same directory as output
This helps to avoid clobbering of temp files in case of parallel
compilation with -save-temps of the files that have the same name
but located in different directories.
Patch by Artem Belevich
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D7304
llvm-svn: 227886
Summary:
The PS4 defaults to -fno-rtti, and has to have rtti enabled when enabling
exceptions.
This commit makes clang add the -fno-rtti by default on the PS4, unless
-frtti was passed in.
It also diagnoses misuses for the PS4:
- Exceptions need rtti. Warn and enable rtti if no rtti flag was passed,
error if -fno-rtti was passed.
I also added a more general warning for when -fno-rtti is the default
(currently it's only on the PS4) and the vptr sanitizer is on.
Fixed a few tests, due to different flag order when passing cc1 arguments.
Reviewers: chandlerc
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D7250
llvm-svn: 227518
Work around a bug in GNU ld (and gold) linker versions up to 2.25
that may mis-optimize code generated by this version of clang/LLVM
to access general-dynamic or local-dynamic TLS variables.
Bug is fixed here:
https://sourceware.org/ml/binutils/2015-01/msg00318.html
llvm-svn: 227480
Those used the old Big Endian support on ARM and don't need flags.
Refactor the logic in a separate common function, which also looks at
-march. Add corresponding logic for the Linux toolchain.
llvm-svn: 227393
Summary:
This was already done for the sanitizers, but it needs to be done for
the profile and builtin libs as well.
Reviewers: srhines, timmurray, eugenis, samsonov
Reviewed By: samsonov
Subscribers: compnerd, cfe-commits
Differential Revision: http://reviews.llvm.org/D7187
llvm-svn: 227392
This patch allows clang to have llvm reserve the x18
platform register on AArch64. FreeBSD will use this in the kernel for
per-cpu data but has no need to reserve this register in userland so
will need this flag to reserve it.
This uses llvm r226664 to allow this register to be reserved.
Patch by Andrew Turner.
llvm-svn: 227062
Summary:
This patch add a new option to dis-allow all inline asm.
Any GCC style inline asm will be reported as an error.
Reviewers: rnk, echristo
Reviewed By: rnk, echristo
Subscribers: bob.wilson, rnk, echristo, rsmith, cfe-commits
Differential Revision: http://reviews.llvm.org/D6870
llvm-svn: 226340
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the clang part of the patch.
llvm part: D3392
http://reviews.llvm.org/D3393
Patch by Stephen Crane (@rinon)
llvm-svn: 225910
Allow blessed access to the symbol rewriter from the driver. Although the
symbol rewriter could be invoked through tools like opt and llc, it would not
accessible from the frontend. This allows us to read the rewrite map files in
the frontend rather than the backend and enable symbol rewriting for actually
performing the symbol interpositioning.
llvm-svn: 225504
It is somewhat common for CFLAGS to be used with .s files. We were
already ignoring -flto. This patch just does the same for -fno-lto.
llvm-svn: 225093
Unfortunately, MSVC does not indicate to the driver what target is being used.
This means that we cannot correctly select the target architecture for the
clang_rt component. This breaks down when targeting windows with the clang
driver as opposed to the clang-cl driver. This should fix the native ARM
buildbot tests.
llvm-svn: 225089
The logic for addSanitizerRTWindows was performing the same logical operation as
getCompilerRT, which was previously fully generalised for Linux and Windows.
This avoids having a duplication of the logic for building up the name of a
clang_rt component. This change does move the current limitation for Windows
into getArchNameForCompilerRTLib, where it is assumed that the architecture for
Windows is always i386.
llvm-svn: 225087
Unify the component handling for compiler-rt. The components are regularly
named, built up from:
${LIBRARY_PREFIX}clang_rt.${component}-${arch}[-${environment}]${LIBRARY_SUFFIX}
Unify the handling for all the various components, into a single path to link
against the various components in a number of places. This reduces duplication
of the clang_rt library name construction logic.
llvm-svn: 225013
Unlike Unices, Windows does not use a library prefix. Use the traditional
naming scheme even for Windows itanium environments. This makes the builtins
behave more like the sanitisers as well.
llvm-svn: 224996
-trigraphs is now an alias for -ftrigraphs. -fno-trigraphs makes it possible
to explicitly disable trigraphs, which couldn't be done before.
clang -std=c++11 -fno-trigraphs
now builds without GNU extensions, but with trigraphs disabled. Previously,
trigraphs were only disabled in GNU modes or with -std=c++1z.
Make the new -f flags the cc1 interface too. This requires changing -trigraphs
to -ftrigraphs in a few cc1 tests.
Related to PR21974.
llvm-svn: 224790
This reapplies r224503 along with a fix for compiling Fortran by having the
clang driver invoke gcc (see r224546, where it was reverted). I have added
a testcase for that as well.
Original commit message:
It is often convenient to use -save-temps to collect the intermediate
results of a compilation, e.g., when triaging a bug report. Besides the
temporary files for preprocessed source and assembly code, this adds the
unoptimized bitcode files as well.
This adds a new BackendJobAction, which is mostly mechanical, to run after
the CompileJobAction. When not using -save-temps, the BackendJobAction is
combined into one job with the CompileJobAction, similar to the way the
integrated assembler is handled. I've implemented this entirely as a
driver change, so under the hood, it is just using -disable-llvm-optzns
to get the unoptimized bitcode.
Based in part on a patch by Steven Wu.
rdar://problem/18909437
llvm-svn: 224688
This reverts commit r224503.
It broke compilation of fortran through the Clang driver. Previously
`clang -c t.f` would invoke `gcc t.f` and `clang -cc1as`, but now it
tries to call `clang -cc1 t.f` which fails for obvious reasons.
llvm-svn: 224546
It is often convenient to use -save-temps to collect the intermediate
results of a compilation, e.g., when triaging a bug report. Besides the
temporary files for preprocessed source and assembly code, this adds the
unoptimized bitcode files as well.
This adds a new BackendJobAction, which is mostly mechanical, to run after
the CompileJobAction. When not using -save-temps, the BackendJobAction is
combined into one job with the CompileJobAction, similar to the way the
integrated assembler is handled. I've implemented this entirely as a
driver change, so under the hood, it is just using -disable-llvm-optzns
to get the unoptimized bitcode.
Based in part on a patch by Steven Wu.
rdar://problem/18909437
llvm-svn: 224503
Remove Sema::UnqualifiedTyposCorrected, a cache of corrected typos. It would only cache typo corrections that didn't provide ValidateCandidate of which there were few left, and it had a bug when we had the same identifier spelled wrong twice. See the last two tests in typo-correction.cpp for cases this fires.
llvm-svn: 224375
can change the backend to be the same default. Leave the
modified/new testcases with the exception of the default behavior
since it increases our testing footprint.
llvm-svn: 223976
This reverts commit r223455. It's been succesfully argued that
-fexceptions (at the driver level) is a misnomer and has little to do
with -fobjc-exceptions.
llvm-svn: 223723
Clang attempted to replicate a GCC bug: -fobjc-exceptions forces
-fexceptions to be enabled. However, this has unintended effects and
other awkard side effects that Clang doesn't "correctly" ape (e.g. it's
impossible to turn off C++ exceptions in ObjC++ mode).
Instead, -f[no]objc-exceptions and -f[no]cxx-exceptions now have an
identical relationship with -f[no]exceptions.
llvm-svn: 223455
No functionality change is intended, just a cleanup of the logic clang
uses to determine what -fexceptions/-fno-exceptions ends up doing.
llvm-svn: 223453
I added this check a while back but then made a note to myself that it
should be completely unnecessary since iOS always uses PIC code-gen for
aarch64. Since I could never come up with any reason why it would be
necessary, I'm just going to remove it and we'll see if anything breaks.
rdar://problem/13627985
llvm-svn: 223097
Using lld on Windows requires calling link-lld.exe instead of
lld.exe. This patch puts this knowledge into clang so that when
using the GCC style clang driver, it can properly delegate to
lld.
Differential Revision: http://reviews.llvm.org/D6428
Reviewed by: Reid Kleckner, Rui Ueyama
llvm-svn: 223086
Add neon-vfpv3 to allow specifying both at the same time. This is not an
option that GCC supports, but follows the same track and should be
non-controversial.
Change-Id: Id9ec157c835937d7d11ad0f49dbe5171fac17658
llvm-svn: 222933
In particular, make SanitizerArgs responsible for parsing
and passing down to frontend -fsanitize-recover and
-fsanitize-undefined-trap-on-error flags.
Simplify parsing -f(no-)sanitize= flags parsing: get rid of
too complex filterUnsupportedKinds function.
No functionality change.
llvm-svn: 222105
This option was misleading because it looked like it enabled the
language feature of SEH (__try / __except), when this option was really
controlling which EH personality function to use. Mingw only supports
SEH and SjLj EH on x86_64, so we can simply do away with this flag.
llvm-svn: 221963
This change removes libclang_rt.profile-pic-<arch>.a version of
profile runtime. Instead, it's sufficient to always build
libclang_rt.profile-<arch>.a with -fPIC, as it can be linked into
both executables and shared objects.
llvm-svn: 221952
Darwin's "-arch arm64" option implies full Cyclone CPU, for both architectural
and tuning purposes. So if neither of the explicit options have been given,
forward that on to the proper invocation.
rdar://problem/18906227
llvm-svn: 221631
If clang was configured with a custom gcc toolchain (either by using GCC_INSTALL_PREFIX in cmake or the equivalent configure command), the path to the custom gcc toolchain path takes precedence to the one specified by -ccc-install-dir. This causes several regression tests to fail as they will be using an unexpected path. Adding the switch --gcc-toolchain="" in each test command is not enough as the hexagon toolchain implementation in the driver is not evaluating this argument. This commit modifies the hexagon toolchain to take the --gcc-toolchain="" argument into account when deciding the toolchain path, similarly to what is already done for other targets toolchains. Additionally, the faulty regression tests are modified in order to --gcc-toolchain="" be passed to the commands.
llvm-svn: 221535
This CPU definition is redundant. The Cortex-A9 is defined as
supporting multiprocessing extensions. Remove references to this CPU.
This CPU was recently removed from LLVM. See http://reviews.llvm.org/D6057
Change-Id: I62ae7cc656fcae54fbaefc4b6976e77e694a8678
llvm-svn: 221458
The command line options are specified in a space-separated list that is an
argument to -dwarf-debug-flags, so that breaks if there are spaces in the
options. This feature came from Apple's internal version of GCC, so I went back
to check how llvm-gcc handled this and matched that behavior.
rdar://problem/18775420
llvm-svn: 221309
'char' is unsigned on all ARM and Thumb architectures. Clang gets this
right for ARM, and for thumb when using and arm triple and the -mthumb
option, but gets it wrong for thumb triples. This fixes that.
llvm-svn: 220555
This is a very basic toolchain. It supports cross-compiling Windows (primarily
inspired by the WoA target). It is meant to use clang with the LLVM IAS and a
binutils ld-compatible interface for the linker (eventually to be lld). It does
not perform any "standard" GCC lookup, nor does it perform any special
adjustments given that it is expected to be used in an environment where the
user is using MSVCRT (and as such Visual Studio headers) and the Windows SDK.
The primary runtime library is expected to be compiler-rt and the C++
implementation to be libc++.
It also expects that a sysroot has been setup given the usual Unix semantics
(standard C headers in /usr/include, all the import libraries available in
/usr/lib). It also expects that an entry point stub is present in /usr/lib
(crtbegin.obj for executables, crtbeginS.obj for shared libraries).
The entry point stub is responsible for running any GNU constructors.
llvm-svn: 220546
This is a sad thing to do, but all the alternatives look ugly.
Looks like there are legitimate cases when users may want to link
with sanitizer runtimes *and* -nodefaultlibs (and ensure they provide
replacements for system libraries). For example, this happens in libc++
test suite.
"-nodefaultlibs" is told to link only the libraries explicitly provided
by the user, and providing "-fsanitize=address" is a clear indication of
intention to link with ASan runtime.
We can't easily introduce analogue of "-print-libgcc-name": linking with
sanitizers runtimes is not trivial: some runtimes are split into several
archive libraries, which are required to be wrapped in
-whole-archive/-no-whole-archive.
If "-fsanitize=whatever" and "-nodefaultlibs" are provided, system library
dependencies of sanitizer runtimes (-lc/-ldl/-lpthread/-lrt) will *not* be
linked, and user would have to link them in manually. Note that this can
cause problems, as failing to provide "-lrt" might lead to crashes in runtime
during ASan initialization. But looks like we should bite this bullet.
See r218541 review thread for the discussion.
llvm-svn: 220455
When a user has not configured a standard Visual Studio environment
by running vcvarsall, clang tries its best to find Visual Studio
include files and executables anyway. This patch makes clang also
try to find system and Windows SDK libraries for linking against,
as well.
Reviewed by: Hans Wennborg
Differential Revision: http://reviews.llvm.org/D5873
llvm-svn: 220425
This resubmits change r220226. That change broke the chromium
build bots because chromium it ships an hermetic MSVC toolchain
that it expects clang to fallback to by finding it on the path.
This patch fixes the issue by bumping up the prioritization of PATH
when looking for MSVC binaries.
Reviewed by: Hans Wennborg, Reid Kleckner
Differential Revision: http://reviews.llvm.org/D5892
llvm-svn: 220424
Implicit module builds are not well-suited to a lot of build systems. In
particular, they fare badly in distributed build systems, and they lead to
build artifacts that are not tracked as part of the usual dependency management
process. This change allows explicitly-built module files (which are already
supported through the -emit-module flag) to be explicitly loaded into a build,
allowing build systems to opt to manage module builds and dependencies
themselves.
This is only the first step in supporting such configurations, and it should
be considered experimental and subject to change or removal for now.
llvm-svn: 220359
-g1 on gcc (and also IBM's xlc) are documented to be very similar to
-gline-tables-only. Our -gline-tables-only might still be more verbose than -g1
on other compilers, but currently we treat -g1 as -g, and so we're producing
much more debug info at -g1 than everybody else. Treating -g1 as
-gline-tables-only brings us much closer to what everyone else is doing.
For more information, see the discussion on
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2014-October/039649.html
llvm-svn: 220311
In environments where PATH was set to point to the VS installation, Clang would
override that by looking in the registry and finding the latest VS installation.
If the environment is set up to point to a VS installation, that should take
precedence.
Reverting this until we can fix it.
llvm-svn: 220243
List the module cache we use for crashdumps as a tempfile. This
simplifies how we pick up this directory when generating the actual
crash diagnostic and removes some duplicate logic.
llvm-svn: 220241
Typically clang finds Visual Studio by the user explicitly setting
up a Visual Studio environment via vcvarsall. But we still try to
behave intelligently and fallback to different methods of finding
Visual Studio when this is not done. This patch improves various
fallback codepaths to make Visual Studio locating more robust.
Specifically, this patch:
* Adds support for searching environment variables for VS 12.0
* Correctly locates include folders for Windows SDK 8.x (this was
previously broken, and would cause clang to error)
* Prefers locating link.exe in the same location as cl.exe. This
is helpful in case another link.exe is in the path earlier than
Visual Studio (e.g. GnuWin32)
* Minor cleanup in the registry reading code to make it more
robust in the presence of long pathnames.
llvm-svn: 220226
Some early revisions of the Cortex-A53 have an erratum (835769) whereby it is
possible for a 64-bit multiply-accumulate instruction in AArch64 state to
generate an incorrect result. The details are quite complex and hard to
determine statically, since branches in the code may exist in some
circumstances, but all cases end with a memory (load, store, or prefetch)
instruction followed immediately by the multiply-accumulate operation.
The safest work-around for this issue is to make the compiler avoid emitting
multiply-accumulate instructions immediately after memory instructions and the
simplest way to do this is to insert a NOP.
This patch implements clang options to enable this workaround in the backend.
The work-around code generation is not enabled by default.
llvm-svn: 219604
Looks like llvm::sys::path::filename() was canonicalizing my paths
before emitting them for FileCheck to stumble over.
Fix a style nit with r219460 while I'm at it.
llvm-svn: 219464
When building with coverage, -no-integrated-as, and -c, the driver was
emitting -cc1 -coverage-file pointing at a file in /tmp. Ensure the
coverage file is emitted in the same directory as the output file.
llvm-svn: 219460
Summary: The changes introduced in the above two commits are giving
a rough time to one of the build bots. Reverting the changes for the
moment so that the bot can go green again.
Change-Id: Id19f6cb2a8bc292631fac2262268927563d820c2
llvm-svn: 218970
The Cortex-M7 has 3 options for its FPU: none, FPv5-SP-D16 and
FPv5-DP-D16. FPv5 has the same instructions as FP-ARMv8, so it can be
modeled using the same target feature, and all double-precision
operations are already disabled by the fp-only-sp target features.
llvm-svn: 218748
being on by default. -fno-cxx-modules can still be used to enable C modules but
not C++ modules, but C++ modules is not significantly less stable than C
modules any more.
Also remove some of the scare words from the modules documentation. We're
certainly not going to remove modules support (though we might change the
interface), and it works well enough to bootstrap and build lots of
non-trivial code.
Note that this does not represent a commitment to the current interface nor
implementation, and we still intend to follow whatever direction the C and C++
committees take regarding modules support.
llvm-svn: 218717
It makes no sense to link in sanitizer runtimes in this case: the user
probably doesn't want to see any system/toolchain libs in his link if he
provides these flags, and the link will most likely fail anyway - as sanitizer
runtimes depend on libpthread, libdl, libc etc.
Also, see discussion in https://code.google.com/p/address-sanitizer/issues/detail?id=344
llvm-svn: 218541
Translate -lfoo to -lfoo.lib while making sure that -lfoo.lib stays as
-lfoo.lib. Also, these arguments were being passed twice: once
explicitly via AddAllArgs, and again implicitly as linker inputs. Now
they are passed once.
Fixes PR20868.
llvm-svn: 217895
Change 1: we used to add static sanitizer runtimes at the
very beginning of the linker invocation, even before crtbegin.o, which
is gross and not correct in general. Fix this: now addSanitizerRuntimes()
adds all sanitizer-related link flags to the end of the linker invocation
being constructed. It means, that we should call this function in the
correct place, namely, before AddLinkerInputs() to make sure sanitizer
versions of library functions will be preferred.
Change 2: Put system libraries sanitizer libraries depend on at the
end of the linker invocation, where all the rest system libraries are
located. Respect --nodefaultlibs and --nostdlib flags. This is another way
to fix PR15823. Original fix landed in r215940 put "-lpthread" and friends
immediately after static ASan runtime, before the user linker inputs.
This caused significant slowdown in dynamic linker for large binaries
linked against thousands of shared objects. Instead, to mark system
libraries as DT_NEEDED we prepend them with "--no-as-needed" flag,
discarding the "-Wl,--as-needed" flag that could be provided by the user.
Otherwise, this change is a code cleanup. Instead of having a special method
for each sanitizer, we introduce a function collectSanitizerRuntimes() that
analyzes -fsanitize= flags and returns the set of static and shared
libraries that needs to be linked.
llvm-svn: 217817
Patch by Rafael Auler!
This patch addresses PR15171 and teaches Clang how to call other tools
with response files, when the command line exceeds system limits. This
is a problem for Windows systems, whose maximum command-line length is
32kb.
I introduce the concept of "response file support" for each Tool object.
A given Tool may have full support for response files (e.g. MSVC's
link.exe) or only support file names inside response files, but no flags
(e.g. Apple's ld64, as commented in PR15171), or no support at all (the
default case). Therefore, if you implement a toolchain in the clang
driver and you want clang to be able to use response files in your
tools, you must override a method (getReponseFileSupport()) to tell so.
I designed it to support different kinds of tools and
internationalisation needs:
- VS response files ( UTF-16 )
- GNU tools ( uses system's current code page, windows' legacy intl.
support, with escaped backslashes. On unix, fallback to UTF-8 )
- Clang itself ( UTF-16 on windows, UTF-8 on unix )
- ld64 response files ( only a limited file list, UTF-8 on unix )
With this design, I was able to test input file names with spaces and
international characters for Windows. When the linker input is large
enough, it creates a response file with the correct encoding. On a Mac,
to test ld64, I temporarily changed Clang's behavior to always use
response files regardless of the command size limit (avoiding using huge
command line inputs). I tested clang with the LLVM test suite (compiling
benchmarks) and it did fine.
Test Plan: A LIT test that tests proper response files support. This is
tricky, since, for Unix systems, we need a 2MB response file, otherwise
Clang will simply use regular arguments instead of a response file. To
do this, my LIT test generate the file on the fly by cloning many -DTEST
parameters until we have a 2MB file. I found out that processing 2MB of
arguments is pretty slow, it takes 1 minute using my notebook in a debug
build, or 10s in a Release build. Therefore, I also added "REQUIRES:
long_tests", so it will only run when the user wants to run long tests.
In the full discussion in
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130408/171463.html,
Rafael Espindola discusses a proper way to test
llvm::sys::argumentsFitWithinSystemLimits(), and, there, Chandler
suggests to use 10 times the current system limit (20MB resp file), so
we guarantee that the system will always use response file, even if a
new linux comes up that can handle a few more bytes of arguments.
However, by testing with a 20MB resp file, the test takes long 8 minutes
just to perform a silly check to see if the driver will use a response
file. I found it to be unreasonable. Thus, I discarded this approach and
uses a 2MB response file, which should be enough.
Reviewers: asl, rafael, silvas
Reviewed By: silvas
Subscribers: silvas, rnk, thakis, cfe-commits
Differential Revision: http://reviews.llvm.org/D4897
llvm-svn: 217792
This adds a flag called -fseh-exceptions that uses the native Windows
.pdata and .xdata unwind mechanism to throw exceptions. The other EH
possibilities are DWARF and SJLJ exceptions.
Patch by Martell Malone!
Reviewed By: asl, rnk
Differential Revision: http://reviews.llvm.org/D3419
llvm-svn: 217790
It turned out that we have to bridge more stuff between the executable
and the ASan RTL DLL than just __asan_option_detect_stack_use_after_return.
See PR20918 for more details.
llvm-svn: 217673
r216662 changed the default ABI for 32-bit ARM targets to be "aapcs"
when no environment is given in the triple, however NetBSD requires it
to be "apcs-gnu".
llvm-svn: 217141
With this patch we call external tools for powerpc-darwin with "-arch ppc"
instead of "-arch powerpc", so as to be compatible with the cctools assembler
and ld64 linker.
Patch by Stephen Drake!
llvm-svn: 216687
The current default abi when no environment is given is "apcs-gnu",
which is obsolete. This patch changes the default to "aapcs". "aapcs" has both
hard- and soft-float variants, so the -mhard-float, -msoft-float and
-mfloat-abi= options now all behave as expected when no environment is
specified in the triple.
While writing this I also noticed that a preprocessor test claims to be
checking darwin, but is actually checking the defaults, which are
different for darwin.
llvm-svn: 216662
ACLE 2.0 allows __fp16 to be used as a function argument or return
type. This enables this for AArch64.
This also fixes an existing bug that causes clang to not allow
homogeneous floating-point aggregates with a base type of __fp16. This
is valid for AAPCS64, but not for AAPCS-VFP.
llvm-svn: 216558
There is no reason to have different library names for shared and static
cases on linux. It also breaks Android where we install the shared asan-rt
library into the system and should keep the old name.
This change reverts most of r216380 limiting it to win32 targets only.
llvm-svn: 216533
With this patch, "check-asan" passes all the tests with both MT and MD ASan RTL if you set COMPILER_RT_BUILD_SHARED_ASAN to ON
(PR20214)
llvm-svn: 216447
1. Always put static sanitizer runtimes to the front of the linker
invocation line. This was already done for all sanitizers except UBSan:
in case user provides static libstdc++ we need to make sure that new/delete
operator definitions are picked from sanitizer runtimes instead of libstdc++.
We have to put UBSan runtime first for similar reasons: it depends on some
libstdc++ parts (e.g. __dynamic_cast function), and has to go first in
link line to ensure these functions will be picked up from libstdc++.
2. Put sanitizer libraries system dependencies (-ldl, -lpthread etc.) right
after sanitizer runtimes. This will ensure these libraries participate in
the link even if user provided -Wl,-as-needed flag. This should fix PR15823.
3. In case we link in several sanitizer runtimes (e.g. "ubsan", "ubsan_cxx"
and "san"), add system dependencies (-ldl, -lpthread, ...) only once.
llvm-svn: 215940
of MIPS toolchains.
The uCLibc implemented for multiple architectures. A couple of MIPS toolchains
contains both uCLibc and glibc implementation so these options allow to select
used C library.
Initially -muclibc / -mglibc (as well as -mbionic) have been implemented in gcc
for various architectures so they are not MIPS specific.
llvm-svn: 215552
Rather than silently disabling unaligned accesses for v6m targets as
in the previous patch to llvm, instead produce a warning saying that
this architecture doesn't support unaligned accesses.
Patch by Ben Foster
llvm-svn: 215531
Summary:
Just like with -finput-charset=UTF-8 in review http://reviews.llvm.org/D4347, I think we should just ignore it when UTF-8 is provided.
Reviewers: rnk, rafael
Reviewed By: rafael
Subscribers: rafael, cfe-commits
Differential Revision: http://reviews.llvm.org/D4841
llvm-svn: 215368
Summary:
This flag can be used to force linking of CXX-specific parts
of sanitizer runtimes into the final executable. It gives more precise
control than --driver-mode=g++ and comes handy when user links several
object files with sanitized C++ code into an executable, but wants
to provide libstdc++ himself, instead of relying on Clang dirver's
behavior.
Test Plan: clang regression test suite
Reviewers: chandlerc, rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4824
llvm-svn: 215252
It wasn't actually a bug that -mabicalls/-mno-abicalls wasn't being passed to
GAS. The only reason we pass it to the integrated assembler is because it shares
the same framework with CodeGen.
llvm-svn: 215236
Also added the testcase that should have been in r215194.
This behaviour has surprised me a few times now. The problem is that the
generated MipsSubtarget::ParseSubtargetFeatures() contains code like this:
if ((Bits & Mips::FeatureABICalls) != 0) IsABICalls = true;
so '-abicalls' means 'leave it at the default' and '+abicalls' means 'set it to
true'. In this case, (and the similar -modd-spreg case) I'd like the code to be
IsABICalls = (Bits & Mips::FeatureABICalls) != 0;
or possibly:
if ((Bits & Mips::FeatureABICalls) != 0)
IsABICalls = true;
else
IsABICalls = false;
and preferably arrange for 'Bits & Mips::FeatureABICalls' to be true by default
(on some triples).
llvm-svn: 215211
intent when we added remark support, but was never implemented in the general
case, because the first -R flags didn't need it. (-Rpass= had special handling
to accomodate its argument.)
-Rno-foo, -Reverything, and -Rno-everything can be used to turn off a remark,
or to turn on or off all remarks. Per discussion on cfe-commits, -Weverything
does not affect remarks, and -Reverything does not affect warnings or errors.
The only "real" -R flag we have right now is -Rmodule-build; that flag is
effectively renamed from -Wmodule-build to -Rmodule-build by this change.
-Wpass and -Wno-pass (and their friends) are also renamed to -Rpass and
-Rno-pass by this change; it's not completely clear whether we intended to have
a -Rpass (with no =pattern), but that is unchanged by this commit, other than
the flag name. The default pattern is effectively one which matches no passes.
In future, we may want to make the default pattern be .*, so that -Reverything
works for -Rpass properly.
llvm-svn: 215046
to instruct the code generator to not enforce a higher alignment
than the given number (of bytes) when accessing memory via an opaque
pointer or reference. Patch reviewed by John McCall (with post-commit
review pending). rdar://16254558
llvm-svn: 214911
This patch adds the '-fcoverage-mapping' option which
allows clang to generate the coverage mapping information
that can be used to provide code coverage analysis using
the execution counts obtained from the instrumentation
based profiling (-fprofile-instr-generate).
llvm-svn: 214752
That reduces a number of `if` operators and prevent a combinatorics explosion
if/when more dynamic linker path variants added.
No functional changes.
llvm-svn: 214712
Build systems tend to traffic in files and modification times, so having
them touch a file at the beginning of the build can be easier than
having them update the compile command they use every time they build.
llvm-svn: 214577
The -mstrict-align option was originally added in r167619 as a target-
independent option. It was then changed in r167623 to be implemented with an
ARM-specific backend option, even though the code remained in the
target-independent Clang::ConstructJob function. This means that if you used
the -mstrict-align option with a non-ARM target, you would still get the
-arm-strict-align option getting passed to the backend, which was harmless
but gross. The driver option was then replaced by the GCC-compatible
-m[no-]unaligned-access option (r189175) and modified to work with AArch64
(r208075). However, in the process, the help text for -mstrict-align was
incorrectly changed to show it as only being supported for AArch64. Even worse,
the logic for handling these options together with -mkernel was wrong for
AArch64, where -mkernel does not currently imply strict alignment.
This patch fixes up all of those things. Besides the obvious change to the
option help text, it moves the logic into the ARM and AArch64-specific parts
of the driver, so that the option will be correctly ignored for non-ARM
targets. <rdar://problem/17823697>
llvm-svn: 214148
While Clang now supports both ELFv1 and ELFv2 ABIs, their use is currently
hard-coded via the target triple: powerpc64-linux is always ELFv1, while
powerpc64le-linux is always ELFv2.
These are of course the most common scenarios, but in principle it is
possible to support the ELFv2 ABI on big-endian or the ELFv1 ABI on
little-endian systems (and GCC does support that), and there are some
special use cases for that (e.g. certain Linux kernel versions could
only be built using ELFv1 on LE).
This patch implements the Clang side of supporting this, based on the
LLVM commit 214072. The command line options -mabi=elfv1 or -mabi=elfv2
select the desired ABI if present. (If not, Clang uses the same default
rules as now.)
Specifically, the patch implements the following changes based on the
presence of the -mabi= option:
In the driver:
- Pass the appropiate -target-abi flag to the back-end
- Select the correct dynamic loader version (/lib64/ld64.so.[12])
In the preprocessor:
- Define _CALL_ELF to the appropriate value (1 or 2)
In the compiler back-end:
- Select the correct ABI in TargetInfo.cpp
- Select the desired ABI for LLVM via feature (elfv1/elfv2)
llvm-svn: 214074
The main subtlety here is that the Darwin tools still need to be given "-arch
arm64" rather than "-arch aarch64". Fortunately this already goes via a custom
function to handle weird edge-cases in other architectures, and it tested.
I removed a few arm64_be tests because that really isn't an interesting thing
to worry about. No-one using big-endian is also referring to the target as
arm64 (at least as far as toolchains go). Mostly they date from when arm64 was
a separate target and we *did* need a parallel name simply to test it at all.
Now aarch64_be is sufficient.
llvm-svn: 213744
Both /showIncludes and /E write to stdout. Allowing both results
in interleaved output and an error when double-closing the file
descriptor, intended to catch issues like this.
llvm-svn: 213589
1. Revert "Add default feature for CPUs on AArch64 target in Clang"
at r210625. Then, all enabled feature will by passed explicitly by
-target-feature in -cc1 option.
2. Get "-mfpu" deprecated.
3. Implement support of "-march". Usage is:
-march=armv8-a+[no]feature
For instance, "-march=armv8-a+neon+crc+nocrypto". Here "armv8-a" is
necessary, and CPU names are not acceptable. Candidate features are
fp, neon, crc and crypto. Where conflicting feature modifiers are
specified, the right-most feature is used.
4. Implement support of "-mtune". Usage is:
-march=CPU_NAME
For instance, "-march=cortex-a57". This option will ONLY get
micro-architectural feature enabled specifying to target CPU,
like "+zcm" and "+zcz" for cyclone. Any architectural features
WON'T be modified.
5. Change usage of "-mcpu" to "-mcpu=CPU_NAME+[no]feature", which is
an alias to "-march={feature of CPU_NAME}+[no]feature" and
"-mtune=CPU_NAME" together. Where this option is used in conjunction
with -march or -mtune, those options take precedence over the
appropriate part of this option.
llvm-svn: 213353
Summary:
With this patch (and a corresponding LLVM patch), assembling an empty file with
GCC and Clang -fintegrated-as produce near identical objects. The remaining
differences are:
* GCC/GAS produce objects have a .pdr section
* GCC/GAS produce objects have a .gnu.attributes section
Other differences are insignificant such as precise file offsets and the order
of strings in the string table.
Differential Revision: http://reviews.llvm.org/D4531
llvm-svn: 213241
however certain sloppy Makefiles pass -z options directly to
the compiler. This patch enables clang to recognize these
options (because -z is not used by clang itself).
llvm-svn: 213198
Summary:
As a result of this patch, assembling an empty file with GCC and Clang (using
GAS as the assembler) now produces identical objects.
-mfp32/-mfpxx/-mfp64 now form a trinity of options. -mfpxx is the default
when the triple vendor is 'img' or 'mti', the ABI is O32, and the CPU is
between mips2 and mips32r2/mips64r2 (inclusive).
-mno-shared is always given to the assembler to match the effect of
-mabicalls (currently unimplemented but Clang acts as if it is given).
Similarly, -call_nonpic is always given to match the effect of -mplt (also
unimplemented and acts as if given) except when the ABI is 64 in which case
-mplt has no effect so -KPIC is given instead.
-mhard-float/-msoft-float are now passed on.
-modd-spreg/-mno-odd-spreg are now passed on.
-mno-mips16 is correctly passed on. The assembler option is -no-mips16 not
-mno-mips16
Differential Revision: http://reviews.llvm.org/D4515
llvm-svn: 213138
This restores the original behaviour of -fmsc-version. The older option
remains as a mechanism for specifying the basic version information. A
secondary option, -fms-compatibility-version permits the user to specify an
extended version to the driver.
The new version takes the value as a dot-separated value rather than the
major * 100 + minor format that -fmsc-version format. This makes it easier to
specify the value as well as a more flexible manner for specifying the value.
Specifying both values is considered an error.
The older parameter is left solely as a driver option, which is normalised into
the newer parameter. This allows us to retain a single code path in the
compiler itself whilst preserving the semantics of the old parameter as well as
avoid having to determine which of two formats are being used by the invocation.
The test changes are due to the fact that the compiler no longer supports the
old option, and is a direct conversion to the new option.
llvm-svn: 213119
Summary:
This implements the -arch flag for both x86 and x86-64 by letting
them affect the default target features we pass to cc1. -m machine
flags will override the features set by -arch.
Reviewers: hansw
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4519
llvm-svn: 213083
Returns a warning when using an unknown optimization flag.
This patch includes -finline-limit as one of those ignored flags.
More options will be moved in this group
Patch by Arthur Marble <arthur@info9.net> in the context of
Debian Google Summer of code 2014.
Reviewers: rnk, Sylvestre
llvm-svn: 212805
This patch flips the default value for -gcolumn-info to be on by
default. I discussed the rationale and provided compile/size data
in:
http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-June/074290.html
This also updates the documentation and some tests that relied on
the lack of column information. Some tests had column information
in the expected output, but it was wrong (the tsan tests). Others
were using the driver to execute.
llvm-svn: 212781
Summary:
* Support the multilib layout used by the mips-img-linux-gnu
* Recognize mips{,64}{,el}-img-linux-gnu as being aliases of mips-img-linux-gnu
* Use the correct dynamic linker for mips-img-linux-gnu
* Make mips32r6/mips64r6 the default CPU for mips-img-linux-gnu
Subscribers: mpf
Differential Revision: http://reviews.llvm.org/D4436
llvm-svn: 212719
There are slight differences between /GR- and -fno-rtti which made
mapping one to the other inappropriate.
-fno-rtti disables dynamic_cast, typeid, and does not emit RTTI related
information for the v-table.
/GR- does not generate complete object locators and thus will not
reference them in vftables. However, constructs like dynamic_cast and
typeid are permitted.
This should bring our implementation of RTTI up to semantic parity with
MSVC modulo bugs.
llvm-svn: 212138
Currently, we fail with an error.
Reviewers: rafael
Reviewed By: rafael
Subscribers: rnk, cfe-commits
Differential Revision: http://reviews.llvm.org/D4347
llvm-svn: 212110
command line option only. Internally we convert them to the "o32" and "n64"
respectively. So we do not need to refer them anywhere after that conversion.
No functional changes.
llvm-svn: 212096
It used to be a feature of UBSan (it could sanitize a standalone
shared object instead of the whole program), but now it causes
more problems, like PR20165.
llvm-svn: 212064
It reverts commits as follows:
r211866: "Driver: use GNU::Link for the Generic_GCC toolchain"
r211895: "Replace GetProgramPath("ld") with GetLinkerPath()."
r211995: "Driver: add a cygwin linker tool"
llvm-svn: 211998
This adds a linker tool for the Windows cygwin environment. This linker
invocation is significantly different from the generic ld invocation. It
requires additional parameters as well as does not accept some normal
parameters. This should fix self-hosting on Cygwin.
llvm-svn: 211995
This isn't 100% compatible with MSVC, but it's close enough. MSVC's /EH
flag doesn't really control exceptions so much as how to clean up after
an exception is thrown. The upshot is that cl.exe /EHs- will compile
try, throw, and catch statements with a warning, but clang-cl will
reject such constructs with a hard error. We can't compile such EH
constructs anyway, but this may matter to consumers of the AST.
Reviewers: hans
Differential Revision: http://reviews.llvm.org/D4317
llvm-svn: 211909
This changes the behaviour of the driver for linking to match that of the
Generic_GCC::Assemble. The default link should use "ld" rather than "gcc" for
the linker as gcc does. This avoids the unnecessary round-tripping through gcc.
It also is much more reasonable behaviour from the user's perspective. This
should have been updated with SVN r195554 which changed the behaviour of
Generic_GCC::Assemble.
The gcc_forward test needs to be updated to mark the fact that -march is a flag
for GCC not ld. This was updated as a typo fix, but added a check for a flag
that is not a link flag.
The bindings test covers the change for testing, and thus no new test was added.
llvm-svn: 211866
The Command will refer back to the Tool as its source,
so it has to outlive the Command.
Having the Tool on the stack would cause us to crash
when using "clang-cl -GR -fallback", because if the
Command fails, Driver::ExecuteCompilation tries to
peek at the Command's source.
Differential Revision: http://reviews.llvm.org/D4314
llvm-svn: 211802
This commit implements the -fuse-ld= option, so that the user
can specify -fuse-ld=bfd to use ld.bfd.
This commit re-applies r194328 with some test case changes.
It seems that r194328 was breaking macosx or mingw build
because clang can't find ld.bfd or ld.gold in the given sysroot.
We should use -B to specify the executable search path instead.
Patch originally by David Chisnall.
llvm-svn: 211785
Summary:
The BSDs and Darwin all forward the whole 'u' group, but gcc only
forwards -u so far as I can tell. I only forward -u, since that's a
minimal change, and many people object to magically recognizing and
forwarding linker arguments.
Reviewers: chandlerc, joerg
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4304
llvm-svn: 211756
Summary:
The dynamic linker is named ld-linux-mipsn8.so.1 when -mnan=2008 is given (or
is the default). It remains ld.so.1 for other cases.
This is necessary for MIPS32r6/MIPS64r6 since these ISA's default to -mnan=2008.
Differential Revision: http://reviews.llvm.org/D4273
llvm-svn: 211598
It's more flexible and arguably better layering to set flags to modify
compiling for diagnostics in the CC1 job themselves, rather than
tweaking the driver flags and letting them propagate.
There is one visible change this causes: crash report files will now
get preprocessed names (.i and friends).
llvm-svn: 211411
On PowerPC LE the system uses the /lib64/ld64.so.2 dynamic linker name
instead of /lib64/ld64.so.1 (to indicate the ELFv2 ABI version).
This fixes the clang driver to pass the appropriate -dynamic-linker
setting, and adds some more tests to linux-ld.c.
llvm-svn: 211360
This mirrors the GCC option for the ARM backend. This option enables the
backend option "-enable-arm-long-calls". The default behaviour is that this is
disabled due to the slight overhead of the generated calls.
If the target of jumps are greater than 64M range of offset-based jumps, then
the target address must be loaded into a register to make an indirect jump. The
backend support for this has been present, but was not previously controllable
by the proper flag.
llvm-svn: 210398
Add driver and frontend support for the GCC -Wframe-larger-than=bytes warning.
This is the first GCC-compatible backend diagnostic built around LLVM's
reporting feature.
This commit adds infrastructure to perform reverse lookup from mangled names
emitted after LLVM IR generation. We use that to resolve precise locations and
originating AST functions, lambdas or block declarations to produce seamless
codegen-guided diagnostics.
An associated change, StringMap now maintains unique mangled name strings
instead of allocating copies. This is a net memory saving in C++ and a small
hit for C where we no longer reuse IdentifierInfo storage, pending further
optimisation.
llvm-svn: 210293
library. That results in the linker resolving all references to weak symbols in
the DSO to the definition from within that DSO. Ironically, this rarely causes
observable problems, except that it causes ubsan's own dynamic type check to
spuriously fail (because we fail to properly merge type_info object names).
llvm-svn: 210220
Summary:
These two flags are in the same family as -Rpass, but are used in
different situations.
-Rpass-missed is used by optimizers to inform the user when they tried
to apply an optimization but couldn't (or wouldn't).
-Rpass-analysis is used by optimizers to report analysis results back
to the user (e.g., why the transformation could not be applied).
Depends on D3682.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D3683
llvm-svn: 209839
A few (mostly CodeGen) parts of Clang were tightly coupled to the
AArch64 backend. Now that it's gone, they will not even compile.
I've also deduplicated RUN lines in many of the AArch64 tests. This
might improve "make check-all" time noticably: some of those NEON
tests were monsters.
llvm-svn: 209578
Call it "libclang_rt.builtins-<arch>.a" to be consistent
with sanitizers/profile libraries naming. Modify Makefile
and CMake build systems and Clang driver accordingly.
Fixes PR19822.
llvm-svn: 209474
Windows on ARM expects ARMv8 (restricted IT) conditional instructions only.
Force enable the restricted IT mode via the backend option when targeting WoA.
llvm-svn: 209086
If `-shared` is specified, pull in a PIC-version of the profile runtime,
which was added to compiler-rt in r208947. I'm hoping this will get the
bots on my side.
llvm-svn: 208948
`clang -S -o - file.c -masm=att` will write assembly to stdout in at&t syntax
(the default), `-masm=intel` will instead output intel style asm.
llvm-svn: 208683
asan_cxx containts replacements for new/delete operators, and should
only be linked in C++ mode. We plan to start building this part
with exception support to make new more standard-compliant.
See https://code.google.com/p/address-sanitizer/issues/detail?id=295
for more details.
llvm-svn: 208610
Summary: The initial support for NaN2008 was added to the back-end in r206396.
Reviewers: atanasyan
Reviewed By: atanasyan
Differential Revision: http://reviews.llvm.org/D3448
llvm-svn: 208220
Don't bother with keeping the old support for x86_64 in 6.99.23+, just
use a single range. Update test cases for the always-on --eh-frame-hdr.
llvm-svn: 208170
After this patch clang will ignore -fdwarf2-cfi-asm and -ffno-dwarf2-cfi-asm and
always print assembly that uses cfi directives.
In llvm, MC itself supports cfi since the end of 2010 (support started
in r119972, is reported in the 2.9 release notes).
In binutils the support has been around for much longer. It looks like
support started to be added in May 2003. It is available in 2.15
(31-Aug-2011, 2.14 is from 12-Jun-2003).
llvm-svn: 207602
Summary:
This patch adds a new flag -Rpass=. The flag indicates the name
of the optimization pass that should emit remarks stating when it
made a transformation to the code.
This implements the design I proposed in:
https://docs.google.com/document/d/1FYUatSjZZO-zmFBxjOiuOzAy9mhHA8hqdvklZv68WuQ/edit?usp=sharing
Other changes:
- Add DiagnosticIDs::isRemark(). Use it in printDiagnosticOptions to
print "-R" instead of "-W" in the diagnostic message.
- In BackendConsumer::OptimizationRemarkHandler, get a SourceLocation
object out of the file name, line and column number. Use that location
in the call to Diags.Report().
- When -Rpass is used without debug info a note is emitted alerting
the user that they need to use -gline-tables-only -gcolumn-info to
get this information.
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3226
llvm-svn: 206401
This introduces the definitions needed for the Windows on ARM target. Add
target definitions for both the MSVC environment and the MSVC + Itanium C++ ABI
environment. The Visual Studio definitions correspond to the definitions
provided by Visual Studio 2012.
llvm-svn: 205650
This adds Clang support for the ARM64 backend. There are definitely
still some rough edges, so please bring up any issues you see with
this patch.
As with the LLVM commit though, we think it'll be more useful for
merging with AArch64 from within the tree.
llvm-svn: 205100
-u behaviour is apparently not portable between linkers (see cfe-commits
discussions for r204379 and r205012). I've moved the logic to IRGen,
where it should have been in the first place.
I don't have a Linux system to test this on, so it's possible this logic
*still* doesn't pull in the instrumented profiling runtime on Linux.
I'm in the process of getting tests going on the compiler-rt side
(llvm-commits "[PATCH] InstrProf: Add initial compiler-rt test"). Once
we have tests for the full flow there, the runtime logic should get a
whole lot less brittle.
<rdar://problem/16458307>
llvm-svn: 205023
This follows the LLVM change to canonicalise the Windows target triple
spellings. Rather than treating each Windows environment as a single entity,
the environments are now modelled properly as an environment. This is a
mechanical change to convert the triple use to reflect that change.
llvm-svn: 204978
In gcc using -Ofast forces linking of crtfastmath.o.
In the current clang crtfastmath.o is only linked when -ffast-math/-funsafe-math-optimizations passed. It can lead to performance issues, when using only -Ofast without explicit -ffast-math (I faced with it).
My patch fixes inconsistency with gcc behaviour and also introduces few tests on it.
Patch by Zinovy Nis!
Differential Revision: http://llvm-reviews.chandlerc.com/D3114
llvm-svn: 204742
This is because the PCH is tied to the module files, if one of the module files changes or gets removed
the build system should re-build the PCH file.
rdar://16321245
llvm-svn: 203885
When enabled, always validate the system headers when loading a module.
The end result of this is that when these headers change, we will notice
and rebuild the module.
llvm-svn: 203630
Generating RTTI in the MS ABI is currently not supported, and the failures
are confusing to users, so let's disable it by default for now.
llvm-svn: 202178
The integrated assembler is a feature. This makes the new flags the default
option, and the previous versions aliases. Ideally, at some point the aliases
would be entirely removed.
llvm-svn: 201963
Forward the -no-integrated-as option to -cc1 rather than simply invoking the
appropriate tool. This is useful since this option has been overloaded to
permit disabling of parsing inline assembly at the MC layer.
This re-applies the previous version of the patch with a renaming of the driver
option to the public name rather than the internal name (-target vs -triple).
The actual failure is fixed separately of an overly aggressive negative pattern
match in the MIPS driver tests. It also fixes the incorrect test for targets
that have the integrated assembler disabled by default.
llvm-svn: 201960
Forward the -no-integrated-as option to -cc1 rather than simply invoking the
appropriate tool. This is useful since this option has been overloaded to
permit disabling of parsing inline assembly at the MC layer.
llvm-svn: 201952
Added two new options for -mfpu when targetting ARM:
* fpv4-sp-d16
* fp4-sp-d16
The first is the same spelling as gcc.
The lack of a leading `v' is correct, this is consistent with ARM's
documentation and gcc's spelling of the option.
llvm-svn: 201846
This commit is not strictly correct nor accounts for all uses (shared
objects, for example), but it allows one to test the compiler-rt library
on GNU targets.
Using this patch to run the test-suite has already shown me problems
on ARM. Since this is a Darwin-only flag, nobody is using it, so it
shouldn't be a problem.
I will need extension to deal with the shared cases, but since we're
not compiling libclang_rt.so, that's not yet applicable. Many other
problems will have to be fixed first in compiler-rt (such as removing
the 'arch' name from it and making it trully multi-arch, moving it to
the default lib directory, make both .a and .so variants, etc).
llvm-svn: 201307
These features are new in VS 2013 and are necessary in order to layout
std::ostream correctly. Currently we have an ABI incompatibility when
self-hosting with the 2013 stdlib in our convertible_fwd_ostream wrapper
in gtest.
This change adds another implicit attribute, MSVtorDispAttr, because
implicit attributes are currently the best way to make sure the
information stays on class templates through instantiation.
Reviewers: majnemer
Differential Revision: http://llvm-reviews.chandlerc.com/D2746
llvm-svn: 201274
the build
When Clang loads the module, it verifies the user source files that the module
was built from. If any file was changed, the module is rebuilt. There are two
problems with this:
1. correctness: we don't verify system files (there are too many of them, and
stat'ing all of them would take a lot of time);
2. performance: the same module file is verified again and again during a
single build.
This change allows the build system to optimize source file verification. The
idea is based on the fact that while the project is being built, the source
files don't change. This allows us to verify the module only once during a
single build session. The build system passes a flag,
-fbuild-session-timestamp=, to inform Clang of the time when the build started.
The build system also requests to enable this feature by passing
-fmodules-validate-once-per-build-session. If these flags are not passed, the
behavior is not changed. When Clang verifies the module the first time, it
writes out a timestamp file. Then, when Clang loads the module the second
time, it finds a timestamp file, so it can compare the verification timestamp
of the module with the time when the build started. If the verification
timestamp is too old, the module is verified again, and the timestamp file is
updated.
llvm-svn: 201224
This patch improves the support for picking Multilibs from gcc installations.
It also provides a better approximation for the flags '-print-multi-directory'
and '-print-multi-lib'.
This reverts r201203 (i.e. re-applying r201202 with small fixes in
unittests/CMakeLists.txtto make the build bots happy).
review: http://llvm-reviews.chandlerc.com/D2538
llvm-svn: 201205
This patch improves the support for picking Multilibs from gcc installations.
It also provides a better approximation for the flags '-print-multi-directory'
and '-print-multi-lib'.
review: http://llvm-reviews.chandlerc.com/D2538
llvm-svn: 201202
John Brawn