File::SeekFromStart returns an off_t representing the position of the
file after seeking. This return value is always going to be one of two
values: the input or -1 in the case of failure.
ObjectFileMachO compares an expression of type off_t from the return of
File::SeekFromStart(segment.fileoff) and compares it for equality with
segment.fileoff.
The type of segment_command_64::fileoff is unsigned while off_t is
signed, comparing them emits a diagnostic under GCC.
Instead, we can just compare SeekFromSTart with -1 to see if we
successfully seeked.
Differential Revision: http://reviews.llvm.org/D4634
llvm-svn: 213822
GCC emits a warning:
warning: enumeral and non-enumeral type in conditional expression [enabled by default]
which does not seem to have a flag to control it. Simply add an explicit cast
for the boolean value.
llvm-svn: 213715
This fixes all of the hidden ivar test cases and any case where we try to find the full definition of an objective C class.
This also means hidden ivars show up again.
<rdar://problem/15458957>
llvm.org/pr20270
llvm.org/pr20269
llvm.org/pr20272
llvm-svn: 213328
The patch is as is with the functionality left disabled for apple vendors because of performance regressions. If this is enabled it ends up searching for symbols in all shared libraries that are loadeded.
llvm-svn: 211638
Address the 'variable set but not used' warning from GCC. In some cases a few
additional calls were removed where there should be no visible side effects of
the calls (i.e. should not effect any cached state).
llvm-svn: 210879
(lldb) file /bin/ls
(lldb) b malloc
(lldb) run
(lldb) process save-core /tmp/ls.core
Each ObjectFile plug-in now has the option to save core files by registering a new static callback.
llvm-svn: 210864
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
ObjectFile::SetLoadAddress (Target &target,
lldb::addr_t value,
bool value_is_offset);
Now "value" is a slide if "value_is_offset" is true, and "value" is an image base address otherwise. All previous usage of this API was using slides.
Updated the ObjectFileELF and ObjectFileMachO SetLoadAddress methods to do the right thing.
Also updated the ObjectFileMachO::SetLoadAddress() function to not load __LINKEDIT when it isn't needed and to only load sections that belong to the executable object file.
llvm-svn: 201003
Fixed an issue with reexported symbols on MacOSX by adding support for symbols re-exporting symbols. There is now a new symbol type eSymbolTypeReExported which contains a new name for the re-exported symbol and the new shared library. These symbols are only used when a symbol is re-exported as a symbol under a different name.
Modified the expression parser to be able to deal with finding the re-exported symbols and track down the actual symbol it refers to.
llvm-svn: 193101
Fixed Module::ResolveSymbolContextForAddress() to be able to also look in the SymbolVendor's SymbolFile's ObjectFile for a more meaningful symbol when a symbol lookup finds a synthetic symbol from the main object file. This will help lookups on MacOSX as the main executable might be stripped, but the dSYM file always has a full symbol table.
llvm-svn: 192510
and a mach kernel in all the pages of the core file. If it finds
a user-process dyld binary, assume this is a user process that had
a copy of the mach kernel in memory when it crashed (e.g. lldb doing
kernel debugging) even though we found the kernel binary first.
Also, change the error messages about sections extending past the end
of the file to be warnings and make the messages sound less severe.
Most user process core files have one section that isn't included in
the file and there's no reason to worry people about that.
<rdar://problem/14473235>
llvm-svn: 190741
out of a binary, if the Mach-O binary is MH_PRELOAD ("standalone"), don't
let the OS be set to "ios" or "macosx" - there will be no dynamic loader
used when debugging this process.
<rdar://problem/9956443>
llvm-svn: 189305
address.
When loading a dSYM, and the file addresses of the dSYM Sections are
different than the executable binary Sections' file addresses, the
debug info won't be remapped to the actual load addresses correctly.
This only happens with binaries on the in-memory shared cache binaries
where their File addresses have been set to their actual load address
(outside an offset value) whereas the original executable and dSYM
have 0-based File addresses.
I think this patch will not be activated for other cases -- this is
the only case we know of where the dSYM and the executable's File
addresses differ -- but if this causes other problems we can restrict
it more carefully.
<rdar://problem/12335086>
llvm-svn: 188532
Improve the documentation for the new target.memory-module-load-level setting, and also return an error when there is no nlist data when appropriate.
llvm-svn: 188317
LLDB needs in memory module load level settings to control how much information is read from memory when loading in memory modules. This change adds a new setting:
(lldb) settings set target.memory-module-load-level [minimal|partial|complete]
minimal will load only sections (no symbols, or function bounds via function starts or EH frame)
partial will load sections + bounds
complete will load sections + bounds + symbols
llvm-svn: 188246
- MachO files now correctly extract the UUID all the time
- More file size and offset verification done for universal mach-o files to watch for truncated files
- ObjectContainerBSDArchive now supports enumerating all objects in BSD archives (.a files)
- lldb_private::Module() can not be properly constructed using a ModuleSpec for a .o file in a .a file
- The BSD archive plug-in shares its cache for GetModuleSpecifications() and the create callback
- Improved printing for ModuleSpec objects
llvm-svn: 186211
- ObjectFile::GetSymtab() and ObjectFile::ClearSymtab() no longer takes any flags
- Module coordinates with the object files and contain a unified section list so that object file and symbol file can share sections when they need to, yet contain their own sections.
Other cleanups:
- Fixed Symbol::GetByteSize() to not have the symbol table compute the byte sizes on the fly
- Modified the ObjectFileMachO class to compute symbol sizes all at once efficiently
- Modified the Symtab class to store a file address lookup table for more efficient lookups
- Removed Section::Finalize() and SectionList::Finalize() as they did nothing
- Improved performance of the detection of symbol files that have debug maps by excluding stripped files and core files, debug files, object files and stubs
- Added the ability to tell if an ObjectFile has been stripped with ObjectFile::IsStripped() (used this for the above performance improvement)
llvm-svn: 185990
Accept mach-o files with bad segments. Many core files are not created correctly and we should still be able to glean any information we can from them.
llvm-svn: 183247
Fixed "target symbols add" to correctly extract all module specifications from a dSYM file that is supplied and match the symbol file to a current target module using the UUID values if they are available.
This fixes the case where you add a dSYM file (like "foo.dSYM") which is for a renamed executable (like "bar"). In our case it was "mach_kernel.dSYM" which didn't match "mach_kernel.sys".
llvm-svn: 181916
Combine N_GSYM stab entries with their non-stab counterpart (data symbols) to make the symbol table smaller with less duplicate named symbols.
llvm-svn: 181841
Most importantly, have DoReadGPR/DoReadFPU/DoReadEXC return -1
to indicate failure if they're called. Else these could override
the Error setting for the relevant thread state -- if the core file
didn't include a floating point thread state, for instance, these
functions would clear the Error setting for that register set and
lldb would display random bytes as those registers' contents.
<rdar://problem/13665075>
llvm-svn: 181757
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
std::string
Module::GetSpecificationDescription () const;
This returns the module as "/usr/lib/libfoo.dylib" for normal files (calls "std::string FileSpec::GetPath()" on m_file) but it also might include the object name in case the module is for a .o file in a BSD archive ("/usr/lib/libfoo.a(bar.o)"). Cleaned up necessary logging code to use it.
llvm-svn: 180717
There is a new static ObjectFile function you can call:
size_t
ObjectFile::GetModuleSpecifications (const FileSpec &file,
lldb::offset_t file_offset,
ModuleSpecList &specs)
This will fill in "specs" which the details of all the module specs (file + arch + UUID (if there is one) + object name (for BSD archive objects eventually) + file offset to the object in question).
This helps us when a user specifies a file that contains a single architecture, and also helps us when we are given a debug symbol file (like a dSYM file on MacOSX) that contains one or more architectures and we need to be able to match it up to an existing Module that has no debug info.
llvm-svn: 180224
differs from lldb's own shared cache, and where the inferior process shared
cache does not match up with the on-disk shared cache file.
Simplify the code where lldb gets its own shared cache uuid a little bit.
llvm-svn: 179633
Show an error message when we have a corrupt mach-o file where the LC_SEGMENT or LC_SEGMENT_64 load command have file offsets or file offsets + sizes that extend beyond the end of the file.
llvm-svn: 179605
a UUID for the shared cache libraries that can be used to confirm
that one process' shared cache is the same as another, or that a
process' in-memory shared cache is a match for a given on-disk
dyld_shared_cache binary file. Use these UUIDs to catch some
uncommon problems when the shared caches are being changed for debug
purposes.
<rdar://problem/13524467>
llvm-svn: 179583
SectionList so we don't try to do anything with this file. Currently we end up crashing
later in the debug session when we read past the end of the file -- this at least gets us
closer with something like ProcessMachCore printing "error: core file has no sections".
<rdar://problem/13468295>
llvm-svn: 179152
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
This returns a vector of <file address, size> entries for all of
the functions in the module that have an eh_frame FDE.
Update ObjectFileMachO to use the eh_frame FDE function addresses if
the LC_FUNCTION_STARTS section is missing, to fill in the start
addresses of any symbols that have been stripped from the binary.
Generally speaking, lldb works best if it knows the actual start
address of every function in a module - it's especially important
for unwinding, where lldb inspects the instructions in the prologue
of the function. In a stripped binary, it is deprived of this
information and it reduces the quality of our unwinds and saved
register retrieval.
Other ObjectFile users may want to use the function addresses from
DWARFCallFrameInfo to fill in any stripped symbols like ObjectFileMachO
does already.
<rdar://problem/13365659>
llvm-svn: 177624
DWARF with .o files now uses 40-60% less memory!
Big fixes include:
- Change line table internal representation to contain "file addresses". Since each line table is owned by a compile unit that is owned by a module, it makes address translation into lldb_private::Address easy to do when needed.
- Removed linked address members/methods from lldb_private::Section and lldb_private::Address
- lldb_private::LineTable can now relink itself using a FileRangeMap to make it easier to re-link line tables in the future
- Added ObjectFile::ClearSymtab() so that we can get rid of the object file symbol tables after we parse them once since they are not needed and kept memory allocated for no reason
- Moved the m_sections_ap (std::auto_ptr to section list) and m_symtab_ap (std::auto_ptr to the lldb_private::Symtab) out of each of the ObjectFile subclasses and put it into lldb_private::ObjectFile.
- Changed how the debug map is parsed and stored to be able to:
- Lazily parse the debug map for each object file
- not require the address map for a .o file until debug information is linked for a .o file
llvm-svn: 176454
lldb was mmap'ing archive files once per .o file it loads, now it correctly shares the archive between modules.
LLDB was also always mapping entire contents of universal mach-o files, now it maps just the slice that is required.
Added a new logging channel for "lldb" called "mmap" to help track future regressions.
Modified the ObjectFile and ObjectContainer plugin interfaces to take a data offset along with the file offset and size so we can implement the correct caching and efficient reading of parts of files without mmap'ing the entire file like we used to.
The current implementation still keeps entire .a files mmaped (once) and entire slices from universal files mmaped to ensure that if a client builds their binaries during a debug session we don't lose our data and get corrupt object file info and debug info.
llvm-svn: 174524
function stub routine addresses from an in-memory-only
MachO object file. This was the only remaining part of
ParseSymtab() that was assuming a file exists.
<rdar://problem/13139585>
llvm-svn: 174455
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
equality can be strict or loose and we want code to
explicitly choose one or the other.
Also renamed the Compare function to IsEqualTo, to
avoid confusion.
<rdar://problem/12856749>
llvm-svn: 170152
When using the same-device optimization for shared cache libraries, if
we have an invalid load address for __LINKEDIT, don't try to read
anything out of lldb's own address space. Reading it out of the remote
address space will fail gracefully if we have bad addresses but reading
it out of lldb's own address space will result in a crash.
llvm-svn: 169582
Allow the expression parser to see more than just data symbols. We now accept any symbol that has an address. We take precautions to only accept symbols by their mangled or demangled names only if the demangled name was not synthesized. If the demangled name is synthesized, then we now mark symbols accordingly and only compare against the mangled original name.
llvm-svn: 168668
RegisterContextKDP_i386 was not correctly writing registers due to missing "virtual" keywords. Added the virtual keywords and made the functions pure virtual to ensure subclasses can't get away without implementing these functions.
llvm-svn: 167066
is being run on iOS natively and we are examining a binary that is
in the shared-cache. The shared cache may be set up to not load the
symbol names in memory (and may be missing some local symbols entirely,
to boot) so we need to read the on-disk-but-not-mapped-into-memory cache
of symbol names/symbols before we start processing the in-memory nlist
entries.
This code needs to be reorganized into its own separate method, ideally
we'll find some way to not duplicate the nlist symbol handling. But
we need to handle this new format quickly and we'll clean up later.
Thanks for James McIlree for the patch. Fixes <rdar://problem/11639018>.
llvm-svn: 158891
a cache of address ranges for child sections,
accelerating lookups. This cache is built during
object file loading, and is then set in stone once
the object files are done loading. (In Debug builds,
we ensure that the cache is never invalidated after
that.)
llvm-svn: 158188
Fixed an issue with the symbol table parsing of files that have STAB entries in them where there are two N_SO entries where the first has a directory, and the second contains a full path:
[ 0] 00000002 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/'
[ 1] 0000001e 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/Source/main.m'
[ 2] 00000047 66 (N_OSO ) 09 0001 000000004fc642d2 '/tmp/main.o'
[ 3] 00000001 2e (N_BNSYM ) 01 0000 0000000000003864
[ 4] 000000bd 24 (N_FUN ) 01 0000 0000000000003864 '_main'
[ 5] 00000001 24 (N_FUN ) 00 0000 00000000000000ae
[ 6] 00000001 4e (N_ENSYM ) 01 0000 00000000000000ae
[ 7] 00000001 64 (N_SO ) 01 0000 0000000000000000
We now correctly combine entries 0 and 1 into a single entry.
llvm-svn: 157712
Fixed an issue with the FUNC_STARTS load command where we would get the
symbol size wrong and we would add all sorts of symbols due to bit zero being
set to indicate thumb.
llvm-svn: 152696
Simplify the locking strategy for Module and its owned objects to always use the Module's mutex to avoid A/B deadlocks. We had a case where a symbol vendor was locking itself and then calling a function that would try to get it's Module's mutex and at the same time another thread had the Module mutex that was trying to get the SymbolVendor mutex. Now any classes that inherit from ModuleChild should use the module lock using code like:
void
ModuleChildSubclass::Function
{
ModuleSP module_sp(GetModule());
if (module_sp)
{
lldb_private::Mutex::Locker locker(module_sp->GetMutex());
... do work here...
}
}
This will help avoid deadlocks by using as few locks as possible for a module and all its child objects and also enforce detecting if a module has gone away (the ModuleSP will be returned empty if the weak_ptr does refer to a valid object anymore).
llvm-svn: 152679
Get function boundaries from the LC_FUNCTION_STARTS load command. This helps to determine symbol sizes and also allows us to be able to debug stripped binaries.
If you have a stack backtrace that goes through a function that has been stripped from the symbol table, the variables for any functions above that stack frame will most likely be incorrect. It can also affect our ability to step in/out/through of a function.
llvm-svn: 152381
This takes two important changes:
- Calling blocks is now supported. You need to
cast their return values, but that works fine.
- We now can correctly run JIT-compiled
expressions that use floating-point numbers.
Also, we have taken a fix that allows us to
ignore access control in Objective-C as in C++.
llvm-svn: 152286
This fix really needed to happen as a previous fix I had submitted for
calculating symbol sizes made many symbols appear to have zero size since
the function that was calculating the symbol size was calling another function
that would cause the calculation to happen again. This resulted in some symbols
having zero size when they shouldn't. This could then cause infinite stack
traces and many other side affects.
llvm-svn: 152244
I started work on being able to add symbol files after a debug session
had started with a new "target symfile add" command and quickly ran into
problems with stale Address objects in breakpoint locations that had
lldb_private::Section pointers into modules that had been removed or
replaced. This also let to grabbing stale modules from those sections.
So I needed to thread harded the Address, Section and related objects.
To do this I modified the ModuleChild class to now require a ModuleSP
on initialization so that a weak reference can created. I also changed
all places that were handing out "Section *" to have them hand out SectionSP.
All ObjectFile, SymbolFile and SymbolVendors were inheriting from ModuleChild
so all of the find plug-in, static creation function and constructors now
require ModuleSP references instead of Module *.
Address objects now have weak references to their sections which can
safely go stale when a module gets destructed.
This checkin doesn't complete the "target symfile add" command, but it
does get us a lot clioser to being able to do such things without a high
risk of crashing or memory corruption.
llvm-svn: 151336
subclasses if the object files support version numbering. Exposed
this through SBModule for upcoming data formatter version checking stuff.
llvm-svn: 151190
Greg Clayton