In turns out this does make a functional change, in case when the inferior hits an int3 that was
not placed by the debugger. Backing out for now.
llvm-svn: 265647
Summary:
SetThreadStopInfo was checking for a breakpoint at the current PC several times. This merges the
identical code into a separate function. I've left one breakpoint check alone, as it was doing
more complicated stuff, and it did not see a way to merge that without making the interface
complicated. NFC.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18819
llvm-svn: 265560
Summary:
The logic to read modules from memory was added to LoadModuleAtAddress
in the dynamic loader, but not in process gdb remote. This means that when
the remote uses svr4 packets to give library info, libraries only present
on the remote will not be loaded.
This patch therefore involves some code duplication from LoadModuleAtAddress
in the dynamic loader, but removing this would require some amount of code
refactoring.
Reviewers: ADodds, tberghammer, tfiala, deepak2427, ted
Subscribers: tfiala, lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18531
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 265418
to each other. This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.
Processes now need to take a ListenerSP, not a Listener&.
This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&. Other than that there should be no functional change.
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39
llvm-svn: 262863
on attach uses the architecture it has figured out, rather than the Target's
architecture, which may not have been updated to the correct value yet.
<rdar://problem/24632895>
llvm-svn: 261279
Summary:
Allows the remote to enumerate the link map when adding and removing
shared libraries, so that lldb doesn't need to read it manually from
the remote's memory.
This provides very large speedups (on the order of 50%) in total
startup time when using the ds2 remote on android or Tizen devices.
Reviewers: ADodds, tberghammer, tfiala
Subscribers: tberghammer, sas, danalbert, llvm-commits, srhines
Differential Revision: http://reviews.llvm.org/D16004
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 257502
at each public stop to improve performance a bit. Most of the
information lldb needed was already in the jThreadsInfo response;
complete that information and catch a few cases where we could still
fall back to getting the information via discrete memory reads.
debugserver adds 'associated_with_dispatch_queue' and 'dispatch_queue_t
keys to the jThreadsInfo response for all the threads. lldb needs the
dispatch_queue_t value. And associated_with_dispatch_queue helps to
identify which threads definitively don't have any queue information so
lldb doesn't try to do memory reads to get that information just because
it was absent in the jThreadsInfo response.
Remove the queue information from the questionmark (T) packet. We'll
get the information for all threads via the jThreadsInfo response -
sending the information for the stopping thread (on all the private
stops, plus the less frequent public stop) was unnecessary information
being sent over the wire.
SystemRuntimeMacOSX will try to get information about queues by asking
the Threads for them, instead of reading memory.
ProcessGDBRemote changes to recognize the new keys being sent in the
jThreadsInfo response. Changes to ThreadGDBRemote to track the new
information. Also, when a thread is marked as definitively not
associated with a libdispatch queue, don't fall back to the system
runtime to try memory reads to find the queue name / kind / ID etc.
<rdar://problem/23309359>
llvm-svn: 257453
"thread-pcs" key is added to the T (questionmark) packet in
gdb-remote protocol so that lldb doesn't need to query the
pc values of every thread before it resumes a process.
The only odd part with this is that I'm sending the pc
values in big endian order, so we need to know the endianness
of the remote process before we can use them. All other
register values in gdb-remote protocol are sent in native-endian
format so this requirement doesn't exist. This addition is a
performance enhancement -- lldb will fall back to querying the
pc of each thread individually if it needs to -- so when
we don't have the byte order for the process yet, we don't
use these values. Practically speaking, the only way I've
been able to elicit this condition is for the first
T packet when we attach to a process.
<rdar://problem/21963031>
llvm-svn: 255942
Summary:
There was a race condition in the AsyncThread, where we would end up sending a vAttach
notification to the thread before it got a chance set up its listener (this can be reproduced by
adding a sleep() at the very beginning of ProcessGDBRemote::AsyncThread()). This event would then
get lost and we LLDB would deadlock. I fix this by setting up the listener early on, in the
ProcessGDBRemote constructor.
This should improve the stability of all attach tests. For now, I am removing XTIMEOUT from
TestAttachResume, and will watch the buildbots for signs of trouble.
Reviewers: clayborg, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12552
llvm-svn: 246756
Summary:
This is useful when dealing with Windows remote that use only the
qXfer:libraries command which returns absolute base addresses, as
opposed to qXfer:libraries-svr4 which returns relative offsets for
module bases.
Reviewers: clayborg, zturner, ADodds
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12204
llvm-svn: 245625
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
- Avoid sending the qfThreadInfo, qsThreadInfo packets if we have a stop reply packet with the threads already (save 2 round trip packets)
- Include the qname, qserial and qkind in the JSON info
- Report the qname, qserial and qkind to the thread so it can cache it to avoid many packets on MacOSX and iOS
- Don't clear all discoverable settings when we exec, just the ones we need to saves 1-5 packets for each exec.
llvm-svn: 240988
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
A "qSymbol::" is sent when shared libraries have been loaded by hooking into the Process::ModulesDidLoad() function from within ProcessGDBRemote. This function was made virtual so that the ProcessGDBRemote version is called, which then first calls the Process::ModulesDidLoad(), and then it queries for any symbol lookups that the remote GDB server might want to do.
This allows debugserver to request the "dispatch_queue_offsets" symbol so that it can read the queue name, queue kind and queue serial number and include this data as part of the stop reply packet. Previously each thread would have to do 3 memory reads in order to read the queue name.
This is part of reducing the number of packets that are sent between LLDB and the remote GDB server.
<rdar://problem/21494354>
llvm-svn: 240466
This patch adds a listener to the AynscThread in ProcessGDBRemote, specifically for dealing with any async notification packets.
From the broadcast our listener receives we can process the notify packet from the event data. A handler function then sets the thread stop info from this packet, and updates lldb by setting the process private state to stopped. Allowing the async thread to go back to sleep and getting the main thread to handle the implications of a state change.
When sending a vCont in nonstop mode we also get a different reply from all-stop mode, an OK response as opposed to a stop reply. So a condition is added to handle this and set the process state without the stop-reply data.
Reviewers: clayborg
Subscribers: lldb-commits, labath, ted, aidan.dodds, deepak2427
Differential Revision: http://reviews.llvm.org/D10544
llvm-svn: 240397
We have been working on reducing the packet count that is sent between LLDB and the debugserver on MacOSX and iOS. Our approach to this was to reduce the packets required when debugging multiple threads. We currently make one qThreadStopInfoXXXX call (where XXXX is the thread ID in hex) per thread except the thread that stopped with a stop reply packet. In order to implement multiple thread infos in a single reply, we need to use structured data, which means JSON. The new jThreadsInfo packet will attempt to retrieve all thread infos in a single packet. The data is very similar to the stop reply packets, but packaged in JSON and uses JSON arrays where applicable. The JSON output looks like:
[
{ "tid":1580681,
"metype":6,
"medata":[2,0],
"reason":"exception",
"qaddr":140735118423168,
"registers": {
"0":"8000000000000000",
"1":"0000000000000000",
"2":"20fabf5fff7f0000",
"3":"e8f8bf5fff7f0000",
"4":"0100000000000000",
"5":"d8f8bf5fff7f0000",
"6":"b0f8bf5fff7f0000",
"7":"20f4bf5fff7f0000",
"8":"8000000000000000",
"9":"61a8db78a61500db",
"10":"3200000000000000",
"11":"4602000000000000",
"12":"0000000000000000",
"13":"0000000000000000",
"14":"0000000000000000",
"15":"0000000000000000",
"16":"960b000001000000",
"17":"0202000000000000",
"18":"2b00000000000000",
"19":"0000000000000000",
"20":"0000000000000000"},
"memory":[
{"address":140734799804592,"bytes":"c8f8bf5fff7f0000c9a59e8cff7f0000"},
{"address":140734799804616,"bytes":"00000000000000000100000000000000"}
]
}
]
It contains an array of dicitionaries with all of the key value pairs that are normally in the stop reply packet. Including the expedited registers. Notice that is also contains expedited memory in the "memory" key. Any values in this memory will get included in a new L1 cache in lldb_private::Process where if a memory read request is made and that memory request fits into one of the L1 memory cache blocks, it will use that memory data. If a memory request fails in the L1 cache, it will fall back to the L2 cache which is the same block sized caching we were using before these changes. This allows a process to expedite memory that you are likely to use and it reduces packet count. On MacOSX with debugserver, we expedite the frame pointer backchain for a thread (up to 256 entries) by reading 2 pointers worth of bytes at the frame pointer (for the previous FP and PC), and follow the backchain. Most backtraces on MacOSX and iOS now don't require us to read any memory!
We will try these packets out and if successful, we should port these to lldb-server in the near future.
<rdar://problem/21494354>
llvm-svn: 240354
In ProcessGDBRemote we currently have a single packet, m_last_stop_packet, used to set the thread stop info.
However in non-stop mode we can receive several stop reply packets in a sequence for different threads. As a result we need to use a container to hold them before they are processed.
This patch also changes the return type of CheckPacket() so we can detect async notification packets.
Reviewers: clayborg
Subscribers: labath, ted, deepak2427, lldb-commits
Differential Revision: http://reviews.llvm.org/D9853
llvm-svn: 238323
The main issue was the Communication::Disconnect() was calling its Connection::Disconnect() but this wouldn't release the pipes that the ConnectionFileDescriptor was using. We also have someone that is holding a strong reference to the Process so that when you re-run, target replaces its m_process_sp, but it doesn't get destructed because someone has a strong reference to it. I need to track that down. But, even if we have a strong reference to the a process that is outstanding, we need to call Process::Finalize() to have it release as much of its resources as possible to avoid memory bloat.
Removed the ProcessGDBRemote::SetExitStatus() override and replaced it with ProcessGDBRemote::DidExit().
Now we aren't leaking file descriptors and the stand alone test suite should run much better.
llvm-svn: 238089
There were two versions of DoAttachToprocessWithId. One that takes
a pid_t, and the other which takes a pid_t and a ProcessAttachInfo.
There were no callers of the former version, and all of the
implementations of this version were simply forwarding calls to
one version or the other.
llvm-svn: 237281
Summary:
This patch is the beginnings of support for Non-stop mode in the remote protocol. Letting a user examine stopped threads, while other threads execute freely.
Non-stop mode is enabled using the setting target.non-stop-mode, which sends a QNonStop packet when establishing the remote connection.
Changes are also made to treat the '?' stop reply packet differently in non-stop mode, according to spec https://sourceware.org/gdb/current/onlinedocs/gdb/Remote-Non_002dStop.html#Remote-Non_002dStop.
A setting for querying the remote for default thread on setup is also included.
Handling of '%' async notification packets will be added next.
Reviewers: clayborg
Subscribers: lldb-commits, ADodds, ted, deepak2427
Differential Revision: http://reviews.llvm.org/D9656
llvm-svn: 237239
Previously the remote module sepcification was fetched only from the
remote platform. With this CL if we have a remote process then we ask it
if it have any information from a given module. It is required because
on android the dynamic linker only reports the name of the SO file and
the platform can't always find it without a full path (the process can
do it based on /proc/<pid>/maps).
Differential revision: http://reviews.llvm.org/D8547
llvm-svn: 233061
This removes ScriptInterpreterObject from the codebase completely.
Places that used to rely on ScriptInterpreterObject now use
StructuredData::Object and its derived classes. To support this,
a new type of StructuredData object is introduced, called
StructuredData::Generic, which stores a void*. Internally within
the python library, StructuredPythonObject subclasses this
StructuredData::Generic class so that it can addref and decref
the python object on construction and destruction.
Additionally, all of the classes in PythonDataObjects.h such
as PythonList, PythonDictionary, etc now provide a method to
create an instance of the corresponding StructuredData type. For
example, there is PythonDictionary::CreateStructuredDictionary.
To eliminate dependencies on PythonDataObjects for external
callers, all ScriptInterpreter methods now return only
StructuredData classes
The rest of the changes in this CL are focused on fixing up
users of PythonDataObjects classes to use the new StructuredData
classes.
llvm-svn: 232534
There are several places where multiple threads are accessing the same variables simultaneously without any kind of protection. I propose using std::atomic<> to make it safer. I did a special build of lldb, using the google tool 'thread sanitizer' which identified many cases of multiple threads accessing the same memory. std::atomic is low overhead and does not use any locks for simple types such as int/bool.
See http://reviews.llvm.org/D5302 for more details.
Change by Shawn Best.
llvm-svn: 217818
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
data if it is available.
Change ProcessGDBRemote's maximum read/write packet size from a
fixed 512 byte value to asking the remote gdb stub what its maximum
is, using up to 128kbyte sizes if that's allowed, and falling back
to 512 if the remote gdb stub doesn't advertise a max packet size.
Add a new "process plugin packet xfer-size" command that can be used
to override the maximum packet size (although not exceeding any packet
size maximum published by the remote gdb stub).
<rdar://problem/16032150>
llvm-svn: 208058
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
ProcessGDBRemote::GetAuxvData obtains the auxv from a remote gdbserver (via a binary-data packet), and returns the data as a DataBufferSP.
The patch includes a small fix to GDBRemoteCommunicationClient::SendPacketsAndConcatenateResponses() to support binary file format packet returns (by not assuming each binary packet is a null-terminated string when concatenating them).
llvm-svn: 202907
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
This helps ensure that the launched debugserver is ready and listening for a connection. Prior to this we had a race condition.
Consolidate the launching of debugserver into a single place: a static function in GDBRemoteCommunication.
llvm-svn: 196401
Pavel Labath