Summary:
New dotest options that allow arbitrary log channels and
categories to be enabled. Also enables logging for locally run
debug servers.
Log messages are separated into separate files per test case.
(this makes it possible to log in dosep runs)
These new log files are stored side-by-side with trace files in the
session directory.
These files are deleted by default if the test run is successful.
If --log-success is specified, even successful logs are retained.
--log-success is useful for creating reference log files.
Test Plan:
add '--channel "lldb all" --channel "gdb-remote packets" --log-success'
to your dotest options
Tested on OSX and Linux
Differential Revision: http://reviews.llvm.org/D9594
llvm-svn: 236956
Summary:
NativeProcessProtocol uses ReadMemory internally for setting/checking
breakpoints but also for generic memory reads (Handle_m), this change adds a
ReadMemoryWithoutTrap for that purpose. Also fixes a bunch of misuses of addr_t
as size/length.
Test Plan: `disassemble` no longer shows the trap code.
Reviewers: jingham, vharron, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9330
llvm-svn: 236132
Summary:
Currently, launching lldb-gdbserver from platform on Android requires root for
mkfifo() and an explicit TMPDIR variable. This should remove both requirements.
Test Plan: Successfully launched lldb-gdbserver on a non-rooted Android device.
Reviewers: tberghammer, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9307
llvm-svn: 235940
the changes in r233255/r233258. Normally if lldb attaches to
a running process, when we call Process::Destroy, we want to detach
from the process. If lldb launched the process itself, ::Destroy
should kill it.
However, if we attach to a process and the driver calls SBProcess::Kill()
(which calls Destroy), we need to kill it even if we didn't launch it
originally.
The force_kill param allows for the SBProcess::Kill method to force the
behavior of Destroy.
<rdar://problem/20424439>
llvm-svn: 235158
Also add "#if defined( LIBXML2_DEFINED )" around code that already used libxml2 in SymbolVendorMacOSX.cpp.
Cleaned up some warnings in ProcessGDBRemote.cpp.
llvm-svn: 235144
Typically, LLGS only sends stdout/stderr notifications when the inferior
process is running.
Because LLGS reads stdout from the process in a separate thread, sometimes
these stdout notifications can be received after the server has sent a thread
stop message. The host isn't expecting stdout to be generated by the target
after a stop message and these messages interfere with the host's request/
response paradigm.
Differential Revision: http://reviews.llvm.org/D9024
llvm-svn: 234995
Previously the remote module sepcification was fetched only from the
remote platform. With this CL if we have a remote process then we ask it
if it have any information from a given module. It is required because
on android the dynamic linker only reports the name of the SO file and
the platform can't always find it without a full path (the process can
do it based on /proc/<pid>/maps).
Differential revision: http://reviews.llvm.org/D8547
llvm-svn: 233061
Some application on Linux an all application on android close stdout and
stderr during the libc exit stage. Previously the master file descriptor
of the pseudo terminal used to communicate with the inferior was closed
on an EOF causing a race condition and a possible SIGHUP on process
exit. After this change the master file descriptor will be closed by the
destructor of the GDBRemoteCommunicationServerLLGS class.
Differential revision: http://reviews.llvm.org/D8436
llvm-svn: 232724
This moves the conversion of the open options to the target platform. On mac fcntl.h has different values for O_CREAT and O_TRUNC than on linux so by transmitting the standardized lldb open options we can correctly convert them on the target platform.
Test Plan:
On linux:
lldb-server p --listen *:1234
On mac:
lldb
platform select remote-linux
platform connect connect://ip-of-linux-box:1234
target create ~/path/to/linux/binary
b main
process launch
Binary is successfully pushed to linux remote, process successfully launches and break in the main method.
Differential Revision: http://reviews.llvm.org/D8395
llvm-svn: 232634
This removes ScriptInterpreterObject from the codebase completely.
Places that used to rely on ScriptInterpreterObject now use
StructuredData::Object and its derived classes. To support this,
a new type of StructuredData object is introduced, called
StructuredData::Generic, which stores a void*. Internally within
the python library, StructuredPythonObject subclasses this
StructuredData::Generic class so that it can addref and decref
the python object on construction and destruction.
Additionally, all of the classes in PythonDataObjects.h such
as PythonList, PythonDictionary, etc now provide a method to
create an instance of the corresponding StructuredData type. For
example, there is PythonDictionary::CreateStructuredDictionary.
To eliminate dependencies on PythonDataObjects for external
callers, all ScriptInterpreter methods now return only
StructuredData classes
The rest of the changes in this CL are focused on fixing up
users of PythonDataObjects classes to use the new StructuredData
classes.
llvm-svn: 232534
The file path is currently required on android because the executables
only contain the name of the system libraries without their path. This
CL add an extra field to the qModuleInfo packet to return the full path
of a modul and add logic to locate a shared module on android.
Differential revision: http://reviews.llvm.org/D8221
llvm-svn: 232156
Previously it was fetched only if the architecture isn't valid, but the
architecture can be valid without containing all information about the
current target (e.g. missing os).
Differential revision: http://reviews.llvm.org/D8057
llvm-svn: 232153
This was previously initialized by ProcessGDBRemote::Initialize but lldb-server does not contain ProcessGDBRemote anymore so this needs to be initialized directly.
Differential Revision: http://reviews.llvm.org/D8186
llvm-svn: 231966
Summary:
ProcessGDBRemote::AsyncThread nuked its own thread handle upon exiting. This prevented the main
thread from joining it correctly in StopAsyncThread. I address this by moving the Reset() call to
StopAsyncThread, after the join.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8218
llvm-svn: 231915
Setting it from the Target architecture cause problems when the target
archiutecture is filled just by examining the executable because in that
case the OS isn't set.
Differential revision: http://reviews.llvm.org/D8035
llvm-svn: 231234
Summary:
Before this fix the FileSpec::GetPath() returned string which might be without '\0' at the end.
It could have happened if the size of buffer for path was less than actual path.
Test case:
```
FileSpec test("/path/to/file", false);
char buf[]="!!!!!!";
test.GetPath(buf, 3);
```
Before fix:
```
233 FileSpec test("/path/to/file", false);
234 char buf[]="!!!!!!";
235 test.GetPath(buf, 3);
236
-> 237 if (core_file)
238 {
239 if (!core_file.Exists())
240 {
(lldb) print buf
(char [7]) $0 = "/pa!!!"
```
After fix:
```
233 FileSpec test("/path/to/file", false);
234 char buf[]="!!!!!!";
235 test.GetPath(buf, 3);
236
-> 237 if (core_file)
238 {
239 if (!core_file.Exists())
240 {
(lldb) print buf
(char [7]) $0 = "/p"
```
Reviewers: zturner, abidh, clayborg
Reviewed By: abidh, clayborg
Subscribers: tberghammer, vharron, lldb-commits, clayborg, zturner, abidh
Differential Revision: http://reviews.llvm.org/D7553
llvm-svn: 230787
This new class makes it easier to change the timeout of a
GDBRemoteCommunication instance for a short time and then restore it to
its original value.
Differential revision: http://reviews.llvm.org/D7826
llvm-svn: 230319
With the previous implementation the protocol used by the client and the
server for the response was different and worked only by an accident.
With this change the communication is fixed and the return code from
mkdir and chmod correctly captured by lldb. The change also add
documentation for the qPlatform__[mkdir,chmod] packages.
Differential revision: http://reviews.llvm.org/D7786
llvm-svn: 230213
This commit merges lldb-platform and lldb-gdbserver into a single binary
of the same size as each of the previous individual binaries. Execution
mode is controlled by the first argument being either platform or
gdbserver.
Patch from: flackr <flackr@google.com>
Differential revision: http://reviews.llvm.org/D7545
llvm-svn: 229683
Fixed test case to copy redirected stdout/stderr files from remote
target to host
llgs wasn't bothering to put the pty master file handle in the right
place if stdout/stderr were redirected to a file. It is still needed
for stdin.
Corrected some log message text
llvm-svn: 229141
We want to forward stdin when stdio is not disabled and when we're not
redirecting stdin from a file.
renamed m_stdio_disable to m_stdin_forward and inverted value because
that's what we want to remember.
There was previously a bug that if you redirected stdin from a file,
stdout and stderr would also be redirected to /dev/null
Adds support for remote target to TestProcessIO.py
Fixes ProcessIOTestCase.test_stdin_redirection_with_dwarf for remote
Linux targets
llvm-svn: 228744
Processes running on a remote target can already send $O messages
to send stdout but there is no way to send stdin to a remote
inferior.
This allows processes using the API to pump stdin into a remote
inferior process.
It fixes a hang in TestProcessIO.py when running against a remote
target.
llvm-svn: 228419
Remove implicit stop action on $vCont package for threads where no
explicit action or default action specified based on the specification
(they have to stay in there original state).
llvm-svn: 227933
This patch fixes TestRegisters on Linux with LLGS
Introduce GetUserRegisterCount on RegisterInfoInterface to distinguish
lldb internal registers (e.g.: DR0-DR7) during register counting.
Update GDBRemoteCommunicationServer to skip lldb internal registers on
read/write register and on discover register.
Submitted for Tamas Berghammer
llvm-svn: 226959
Make sure the selected platform is always used
Make sure that the host uses the connect://hostname to connect to both
the lldb-platform and the lldb-gdbserver rather than what the platform
reports as the hostname of the lldb-gdbserver
Make sure that lldb-platform uses the IP address on it's connection
back to the host instead of the hostname that the host sends to it
when launching lldb-gdbserver with the remote host information
Tested on OSX and Linux
llvm-svn: 226712
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
This reverts commit 4a5ad2c077166cc3d6e7ab4cc6e3dcbbe922af86.
Windows doesn't support select() for pipe objects, and this also fails
to compile on Windows. Reverting this until we can get it sorted out
to keep the windows build working.
llvm-svn: 223392
The details are: large packets (like large memory reads (m packets) or large binary memory reads (x packet)) can get responses that come in across multiple read() calls. The while loop that was added meant that if only a partial packet came in (like only "$abc" coming for a response) GDBRemoteCommunication::CheckForPacket() was called, it would deadlock in the while loop because no more data is going to come in as this function needs to be called again with more data from another read. So the original fix will need to be corrected and resubmitted.
<rdar://problem/18853744>
llvm-svn: 221181
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
The $A handler was unnecessarily waiting for the launched app to hit a stop
before returning. Removed this code.
Renamed the llgs inferior launching code to LaunchProcessForDebugging ()
to prevent it from possibly being mistaken as code that lldb-platform uses
to launch a debugserver process. We probably want to look at breaking out
llgs-specific and lldb-platform-specific code into separate derived classes,
with common code in a shared base class.
llvm-svn: 218075
There are several places where multiple threads are accessing the same variables simultaneously without any kind of protection. I propose using std::atomic<> to make it safer. I did a special build of lldb, using the google tool 'thread sanitizer' which identified many cases of multiple threads accessing the same memory. std::atomic is low overhead and does not use any locks for simple types such as int/bool.
See http://reviews.llvm.org/D5302 for more details.
Change by Shawn Best.
llvm-svn: 217818
Instead of forcing the remote arch type to MachO all the time, we
inspect the OS/vendor that the remote debug server reports and use it to
set the arch type to MachO, ELF or COFF accordingly.
See thread here for more context:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140915/012968.html
Change by Stephane Sezer.
Tested:
MacOSX 10.9.4 x86_64
Ubuntu 14.04 x86_64
llvm-svn: 217779
This is useful for checking inconsistencies between what the remote debug server thinks we are debugging and we think we are debugging. This follows the check for pointer byte size done just above.
Change by Stephane Sezer.
Tested:
Ubuntu 14.04 x86_64, llvm-3.5-built lldb
MacOSX 10.9.4, Xcode-Beta(2014-09-09)-built lldb.
llvm-svn: 217773
* Fixes the local stack variable return pointer usage in NativeThreadLinux::GetName().
* Changes NativeThreadProtocol::GetName() to return a std::string.
* Adds a unit test to verify thread names don't regress in the future. Currently only run on Linux since I know default thread names there.
llvm-svn: 217717
* Sends a SIGSTOP to the process.
* Fixes busted SIGSTOP handling. Now builds a list of non-stopped
that we wait for the PTRACE group-stop for. When the final must-stop
tid gets its group stop, we propagate the process state change.
Only the signal receiving the notification of the pending SIGSTOP
is marked with the SIGSTOP signal. All the rest, if they weren't
already stopped, are marked as stopped with signal 0.
* Fixes a few broken tests.
* Marks the Linux test I added earlier as expect-pass (no longer XFAIL).
Implements fix for http://llvm.org/bugs/show_bug.cgi?id=20908.
llvm-svn: 217647
This change implements this ticket:
http://llvm.org/bugs/show_bug.cgi?id=20899
Adds the qThreadStopInfo RSP command for llgs and includes a test that
verifies both debugserver and llgs respond with something reasonable
on a multithreaded app.
llvm-svn: 217549
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
This cleans up a couple of warnings [-Wcovered-switch-default] from the build by
removing the default case from a couple of switches which are fully covered.
This is generally better as it will help identify when a new item is added to
the enumeration but the use sites are not updated.
llvm-svn: 217376
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
This patch accepts environment variables of the form:
LLDB_DEBUGSERVER_EXTRA_ARG_n
where n starts with 1, and may continue nearly indefinitely (up through std::numeric_limits<uint32_t>::max()).
The code loops around, starting with 1, until it doesn't find one of the environment variables. For each one it does find defined, it appends the environment variable's contents to the end of the debugserver/llgs startup command line issued when the stub is started for local debugging.
I am using this to add arbitrary startup commands to the llgs command line for turning on additional logging. For example:
export LLDB_DEBUGSERVER_EXTRA_ARG_1="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_2="log enable -f /tmp/llgs_packets.log gdb-remote packets"
export LLDB_DEBUGSERVER_EXTRA_ARG_3="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_4="log enable -f /tmp/llgs_process.log lldb process"
llvm-svn: 216745
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
This change addresses this bug:
http://llvm.org/bugs/show_bug.cgi?id=20755
This change:
* Modifies llgs to send triple instead of cputype and cpusubtype when not on Apple platforms in qProcessInfo.
* Modifies lldb's GDBRemoteCommunicationClient to handle the triple returned from qProcessInfo if given.
When given, it will prefer to use triple over cputype and cpusubtype.
* Adds gdb-remote protocol tests to verify that cputype and cpusubtype are specified on darwin, and that triple is specified on Linux.
llvm-svn: 216470
This continues the effort to get Host code moved over to HostInfo,
and removes many more instances of preprocessor defines along the
way.
llvm-svn: 216195
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
call Target::SetArchitecture instead of modifying a
reference to the target's architecture so that the
target logging can show that the arch has been changed.
llvm-svn: 214667
GDBRemoteRegisterContext::ReadRegisterBytes and
GDBRemoteRegisterContext::WriteRegisterBytes to ensure we don't try
to read/write off the end of the register buffer. This should never
happen but we've had some target confusion in the past where it
did; adding the checks is prudent to avoid crashing here if it happens
again.
<rdar://problem/16450971>
<rdar://problem/16458182>
llvm-svn: 213829
to the remote side (QStartNoAckMode) - it may take a little longer
than normal to get a reply.
In debugserver, hardcode the priority for several threads so they
aren't de-prioritized when a user app is using system resources.
Also, set the names of the threads.
<rdar://problem/17509866>
llvm-svn: 213828
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
This change enables lldb-platform for Linux. In addition, it does the following:
* fixes Host::GetLLDBPath() to work on Linux/*BSD for ePathTypeSupportExecutableDir-relative paths.
* adds more logging and comments around lldb-platform startup and remote lldb-platform usage.
* refactors lldb-platform remote-* support for Darwin and Linux into PlatformPOSIX. This, in theory, is the bulk of what is needed for *BSD to make remote connections to lldb-platform as well (although I haven't tested that yet). FreeBSD can make similar changes to their Platform* as was made here for PlatformLinux to pick up the rest of the bits.
* teaches GDBRemoteCommunication to use lldb-gdbserver for non-Apple hosts.
llvm-svn: 213707
Now that llgs supports communicating the 0-port choose-a-port
mechanism and can communicate that back to a caller via the
--named-pipe option (at parity with debugserver), we use this
mechanism to always start llgs and debugserver gdb-remote
protocol tests without needing to use some port arbitration
mechanism. This eliminates some potential intermittent failures vs. the
previous random port and collision-avoidance strategy used.
llvm-svn: 212923
off_t is a type which is used for file offsets. Even more
specifically, it is only used by a limited number of C APIs that
deal with files. Any usage of off_t where the variable is not
intended to be used with one of these APIs is a bug, by definition.
This patch corrects some easy mis-uses of off_t, generally by
converting them to lldb::offset_t, but sometimes by using other
types such as size_t, when appropriate.
The use of off_t to represent these offsets has worked fine in
practice on linux-y platforms, since we used _FILE_OFFSET_64 to
guarantee that off_t was a uint64. On Windows, however,
_FILE_OFFSET_64 is unrecognized, and off_t will always be 32-bit.
So the usage of off_t on Windows actually leads to legitimate bugs.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4358
llvm-svn: 212192
With _HAS_EXCEPTIONS=0, Windows' version of <thread> will fail to
compile because it calls __uncaught_exception(), which is compiled
out due to _HAS_EXCEPTIONS=0. This just creates a stub version
of __uncaught_exception() which always fails.
llvm-svn: 212076
Also moves NativeRegisterContextLinux* files into the Linux directory.
These, like NativeProcessLinux, should only be built on Linux or a cross
compiler with proper headers.
llvm-svn: 212074
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
When a stub reported $#00 (unsupported) for _M and _m
packets, the unsupported response was not handled and
the client then marked the _M/_m commands as definitely
supported. However, they would always fail, preventing
lldb's fallback InferiorCallMmap-based allocation strategy
from being used to attempt to allocate memory in the inferior
process space.
llvm-svn: 211425
Address the 'variable set but not used' warning from GCC. In some cases a few
additional calls were removed where there should be no visible side effects of
the calls (i.e. should not effect any cached state).
llvm-svn: 210879
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
This fixes a number of trivial warnings in the Windows build. This is part of a larger effort to make the Windows build warning-free.
See http://reviews.llvm.org/D3914 for more details.
Change by Zachary Turner
llvm-svn: 209749
debugserver now returns $X09 as the immediate response to
a $k kill process request rather than $W09.
ProcessGDBRemote now properly handles X as indication of
a process exit state.
The @debugserver_test and @lldb_test for $k now properly expects
an X notification (signal-caused exit) after killing a just-attached
inferior that was still in the stopped state.
llvm-svn: 209108
See thread here:
http://lists.cs.uiuc.edu/pipermail/lldb-dev/2014-May/003992.html
This is meant to address case 3 that I recently broke with an earlier
change to rectify usage of the $qC message for thread ids, specifically:
3. TOT lldb <=> gdbserver (without $qProcessInfo support and not Apple/iOS).
llvm-svn: 208741
$qC from debugserver now returns the current thread's thread-id (and, like $?, will set a current thread if one is not already selected). Previously it was returning the current process id.
lldb will now query $qProcessInfo to retrieve the process id. The process id is now cached lazily and reset like other cached values. Retrieval of the process id will fall back to the old $qC method for vendor==Apple and os==iOS if the qProcessInfo retrieval fails.
Added a gdb remote protocol-level test to verify that $qProcessInfo reports a valid process id after launching a process, while the process is in the initial stopped state. Verifies the given process id is a currently valid process on host OSes for which we know how to check (MacOSX, Linux, {Free/Net}BSD). Ignores the live process check for OSes where we don't know how to do this. (I saw no portable way to do this in stock Python without pulling in other libs).
llvm-svn: 208241
data if it is available.
Change ProcessGDBRemote's maximum read/write packet size from a
fixed 512 byte value to asking the remote gdb stub what its maximum
is, using up to 128kbyte sizes if that's allowed, and falling back
to 512 if the remote gdb stub doesn't advertise a max packet size.
Add a new "process plugin packet xfer-size" command that can be used
to override the maximum packet size (although not exceeding any packet
size maximum published by the remote gdb stub).
<rdar://problem/16032150>
llvm-svn: 208058
- CTRL+C wasn't clearing the command in lldb
- CTRL+C doesn't work in python macros in lldb
- Ctrl+C no longer interrupts the running process that you attach to
<rdar://problem/15949205>
<rdar://problem/16778652>
<rdar://problem/16774411>
llvm-svn: 207816
currently associated with a given thread, on relevant targets.
Change the queue detection code to verify that the queues
associated with all live threads are included in the list.
<rdar://problem/16411314>
llvm-svn: 207160
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
condition where we could end up killing debugserver (and thus the target) before it had a chance
to detach.
Also fix debugserver to send the OK AFTER it detaches to avoid the same race condition.
<rdar://problem/16202713>
llvm-svn: 205043
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
This is a mechanical cleanup of unused functions. In the case where the
functions are referenced (in comment form), I've simply commented out the
functions. A second pass to clean that up is warranted.
The functions which are otherwise unused have been removed. Some of these were
introduced in the initial commit and not in use prior to that point!
NFC
llvm-svn: 204310
ProcessGDBRemote::GetAuxvData obtains the auxv from a remote gdbserver (via a binary-data packet), and returns the data as a DataBufferSP.
The patch includes a small fix to GDBRemoteCommunicationClient::SendPacketsAndConcatenateResponses() to support binary file format packet returns (by not assuming each binary packet is a null-terminated string when concatenating them).
llvm-svn: 202907
libldi library to collect extended backtrace information; switch
to the libBacktraceRecording library and its APIs. Complete the
work of adding QueueItems to Queues and allow for the QueueItems
to be interrogated about their extended backtraces in turn.
There's still cleanup and documentation to do on this code but the
code is functional and I it's a good time to get the work-in-progress
checked in.
<rdar://problem/15314027>
llvm-svn: 200822
GDBProcessCommunicationServer now optionally takes a PlatformSP that
defaults to the default platform for the host.
GDBProcessCommunicationServer::LaunchProcess () now uses the platform
to launch the process.
lldb-gdbserver now takes an optional --platform={platform_plugin_name}
or -p {platform_plugin_name} command line option. If no platform is
specified, the default platform for the host is used; otherwise, if
the platform_plugin_name matches a registered platform plugin or
matches the default platform's name (which is not necessarily
registered by name in the case of 'host'), that platform is used. If
the platform name cannot be resolved, lldb-gdbserver exits after
printing all the available platform plugin names and the default
platform plugin name.
llvm-svn: 200266
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
if the remote stub provided enough information to identify it in the
qProcessInfo packet response. (e.g. for an Apple device where we know
it is Mach-O, the cpu type & cpu sub type).
<rdar://problem/15847901>
llvm-svn: 200253
This change modifies the 'A' command handler's launch code to launch
with LaunchProcess (). The net effect is that the default process
monitoring that LaunchProcess () adds will kick in, allowing the
GDBRemoteCommunicationServer to be able to reap processes started with
this facility correctly. Later, in the case of lldb-gdbserver, we'll
also have the proper process monitoring going on to really debug the
inferior process.
llvm-svn: 200246
There are a couple of pieces:
* some lazy-evaluation members that store info listed in a qSupported response
* new method SendPacketsAndConcatenateResponses which is used for
fetching fixed-size objects from the remote gdbserver by using multiple
packets if necessary (first use will be to fetch shared-library XML files).
llvm-svn: 200072
right after the space for it is allocated on the stack, instead of trying
to initialize it in all the different places in this method. It's too easy
for another uninitialized code path to sneak in as it is written right now.
llvm-svn: 200066
GDBRemoteCommunicationServer::LaunchProcess () now uses the built-up
ProcessLaunchArgs rather than clearing and setting items from the
function arguments. I added setters for the arguments and launch
flags, which lldb-gdbserver uses for its specification of the
commandline-specified startup app (if one is specified).
LaunchProcess () also adds a new reaper monitor that it applies to
the launched process if no process monitor has already been applied.
This addresses an issue where the 'k' command would generate (possibly
false) warnings about not being able to positively state whether a
killed process actually terminated. GDBRemoteCommunicationServer now
definitely knows the disposition of its children.
llvm-svn: 199959
lldb-gdbserver was launching the commandline-specified launch process
directly, without GDBRemoteCommunicationServer knowing anything about
it. As GDBRemoteCommunicationServer is the piece that manages and
knows about processes that the gdb remote protocol discusses with
the client end, it is important that it know about launched processes.
This change also implements the k gdb remote protocol message, having it
kill all known spawned processes when it is received.
(Note: in lldb-gdbserver, the spawned processes are not properly
monitored yet. The response to the k packet will complain that
spawned processes do not really appear to be getting killed even if
they are. This will get addressed soon.)
llvm-svn: 199945
ArchSpec now contains an optional distribution_id, with getters and
setters. Host::GetArchitecture () sets it on non-Apple platforms using
Host::GetDistributionId (). The distribution_id is ignored during
ArchSpec comparisons.
The gdb remote qHostInfo message transmits it, if set, via the
distribution_id={id-value} key/value pair. Updated gdb remote docs to
reflect this change.
As before, GetDistributionId () returns nothing on non-Linux platforms
at this time. On Linux, it is returned only if the lsb_platform
command is installed (in /bin or /usr/bin), and only if the
distributor id key is returned by 'lsb_platform -i'. This id is
lowercased, and whitespace is replaced with underscores.
llvm-svn: 199539
This change fixes a bug recently introduced in ProcessGDBRemote that
prevented the Python register definition file from getting loaded when
the qRegisterInfo0 response returned $00#.
Patch by Steve Pucci.
llvm-svn: 198742
it needs to fall back to using the HostArchitecture if a valid one is not
returned. When doing low-level system debugging we may not have a process
(or the remote stub may not support the qProcessInfo packet) in which case
we should fall back to the architecture we determined via qHostInfo.
<rdar://problem/15713180>
llvm-svn: 197857
During testing I observed QEMU send "$T02thread:01;#04" upon connection,
before any command from LLDB. This change from gclayton accepts (and
discards) a packet immediately after sending the initial ack, to flush
the GDB remote pipeline.
llvm-svn: 197579
While investigating test suite failures when running the test suite remotely, I noticed we had 3 copies of code that launched a process:
1 - in "process launch" command
2 - SBTarget::Launch() with args
3 - SBTarget::Launch() with SBLaunchInfo
"process launch" was launching through the platform if it was supported (this is needed for remote debugging) and the 2 and 3 were not.
Now all code is in one place.
llvm-svn: 197247
<rdar://problem/15600045>
Due to other recent changes, all connections to GDB servers that didn't support the "QStartNoAckMode" packet would cause us to fail to attach to the remote GDB server.
The problem was that SendPacket* and WaitForResponse* packets would return a size_t indicating the number of bytes sent/received. The other issue was WaitForResponse* packets would strip the leading '$' and the trailing "#CC" (checksum) bytes, so the unimplemented response packet of "$#00" would get stripped and the WaitForResponse* packets would return 0.
These new error codes give us flexibility to to more intelligent things in response to what is returned.
llvm-svn: 196610
Vince Harron