isBrImm should accept any non-constant immediate. Previously it was only accepting LanaiMCExpr ones which was wrong.
Differential Revision: http://reviews.llvm.org/D18571
llvm-svn: 265032
If the lhs is evaluated before the rhs, FuncletI's operator-> can trigger the
assert(isHandleInSync() && "invalid iterator access!");
at include/llvm/ADT/DenseMap.h:1061. (Happens e.g. when compiled with GCC 6.)
Differential Revision: http://reviews.llvm.org/D18440
llvm-svn: 265024
PPCSimplifyAddress contains this code:
IntegerType *OffsetTy = ((VT == MVT::i32) ? Type::getInt32Ty(*Context)
: Type::getInt64Ty(*Context));
to determine the type to be used for an index register, if one needs
to be created. However, the "VT" here is the type of the data being
loaded or stored, *not* the type of an address. This means that if
a data element of type i32 is accessed using an index that does not
not fit into 32 bits, a wrong address is computed here.
Note that PPCFastISel is only ever used on 64-bit currently, so the type
of an address is actually *always* MVT::i64. Other parts of the code,
even in this same PPCSimplifyAddress routine, already rely on that fact.
Thus, this patch changes the code to simply unconditionally use
Type::getInt64Ty(*Context) as OffsetTy.
llvm-svn: 265023
This patch corresponds to review:
http://reviews.llvm.org/D18032
This patch provides asm implementation for the following instructions:
lwat, ldat, stwat, stdat, ldmx, mcrxrx
llvm-svn: 265022
Summary:
This change will handle missing store pair opportunity where the first store
instruction stores zero followed by the non-zero store. For example, this change
will convert :
str wzr, [x8]
str w1, [x8, #4]
into:
stp wzr, w1, [x8]
Reviewers: jmolloy, t.p.northover, mcrosier
Subscribers: flyingforyou, aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18570
llvm-svn: 265021
The fast isel pass currently emits a COPY_TO_REGCLASS node to convert
from a F4RC to a F8RC register class during conversion of a
floating-point number to integer. There is actually no support in the
common code instruction printers to emit COPY_TO_REGCLASS nodes, so the
PowerPC back-end has special code there to simply ignore
COPY_TO_REGCLASS.
This is correct *if and only if* the source and destination registers of
COPY_TO_REGCLASS are the same (except for the different register class).
But nothing guarantees this to be the case, and if the register
allocator does end up allocating source and destination to different
registers after all, the back-end simply generates incorrect code. I've
included a test case that shows such incorrect code generation.
However, it seems that COPY_TO_REGCLASS is actually not intended to be
used at the MI layer at all. It is used during SelectionDAG, but always
lowered to a plain COPY before emitting MI. Other back-end's fast isel
passes never emit COPY_TO_REGCLASS at all. I suspect it is simply wrong
for the PowerPC back-end to emit it here.
This patch changes the PowerPC back-end to directly emit COPY instead of
COPY_TO_REGCLASS and removes the special handling in the instruction
printers.
Differential Revision: http://reviews.llvm.org/D18605
llvm-svn: 265020
Summary:
There are too many instructions to exhaustively test so addiu and lwc2 are
used as representative examples.
It should be noted that many memory instructions that should have simm16
range checking do not because it is also necessary to support the macro
of the same name which accepts simm32. The range checks for these occur in
the macro expansion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18437
llvm-svn: 265019
Summary:
ldc2/sdc2 now emit slightly worse diagnostics for MIPS-I. The problem
is that they don't trigger the custom parser because all the candidates
are disabled by feature bits. On all other subtargets, the diagnostics are
accurate but are subject to the usual issues of needing to report multiple
ways to correct the code (e.g. smaller offset, enable a CPU feature) but
only being able to report one error.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18436
llvm-svn: 265018
This patch is a part of http://reviews.llvm.org/D15525
GlobalIndirectSymbol class contains common implementation for both
aliases and ifuncs. This patch should be NFC change that just prepare
common code for ifunc support.
Differential Revision: http://reviews.llvm.org/D18433
llvm-svn: 265016
Summary:
Also, made test_mi10.s formatting consistent with the majority of the
MC tests.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18435
llvm-svn: 265014
Change isConsecutiveLoads to check that loads are non-volatile as this
is a requirement for any load merges. Propagate change to two callers.
Reviewers: RKSimon
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18546
llvm-svn: 265013
Summary:
The bug was that microMIPS's [ls]w[lr]e instructions claimed to support a
12-bit offset when it is only 9-bit.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18434
llvm-svn: 265010
This way once we teach MatchBinaryOp to map more things into arithmetic,
the non-wrapping add recurrence construction would understand it too.
Right now MatchBinaryOp still only understands arithmetic, so this is
solely a code-reorganization change.
llvm-svn: 264994
When dealing with complex<float>, and similar structures with two
single-precision floating-point numbers, especially when such things are being
passed around by value, we'll sometimes end up loading both float values by
extracting them from one 64-bit integer load. It looks like this:
t13: i64,ch = load<LD8[%ref.tmp]> t0, t6, undef:i64
t16: i64 = srl t13, Constant:i32<32>
t17: i32 = truncate t16
t18: f32 = bitcast t17
t19: i32 = truncate t13
t20: f32 = bitcast t19
The problem, especially before the P8 where those bitcasts aren't legal (and
get expanded via the stack), is that it would have been better to use two
floating-point loads directly. Here we add a target-specific DAGCombine to do
just that. In short, we turn:
ld 3, 0(5)
stw 3, -8(1)
rldicl 3, 3, 32, 32
stw 3, -4(1)
lfs 3, -4(1)
lfs 0, -8(1)
into:
lfs 3, 4(5)
lfs 0, 0(5)
llvm-svn: 264988
Summary:
As discussed on llvm-dev[1].
This change adds the basic boilerplate code around having this intrinsic
in LLVM:
- Changes in Intrinsics.td, and the IR Verifier
- A lowering pass to lower @llvm.experimental.guard to normal
control flow
- Inliner support
[1]: http://lists.llvm.org/pipermail/llvm-dev/2016-February/095523.html
Reviewers: reames, atrick, chandlerc, rnk, JosephTremoulet, echristo
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18527
llvm-svn: 264976
The size savings are significant, and from what I can tell, both ICC and GCC do this.
Differential Revision: http://reviews.llvm.org/D18573
llvm-svn: 264966
r264884 introduced a helper to escape the backslashes in the source file
path, but I since discovered an existing mechanism to escape strings.
llvm-svn: 264936
Commit r260791 contained an error in that it would introduce a cross-module
reference in the old module. It also introduced O(N^2) complexity in the
module cloner by requiring the entire module to be visited for each function.
Fix both of these problems by avoiding use of the CloneDebugInfoMetadata
function (which is only designed to do intra-module cloning) and cloning
function-attached metadata in the same way that we clone all other metadata.
Differential Revision: http://reviews.llvm.org/D18583
llvm-svn: 264935
For the same reason as the corresponding load change.
Note that ExpandStore is completely broken for non-byte sized element
vector stores, but preserve the current broken behavior which has tests
for it. The behavior should be the same, but now introduces a new typed
store that is incorrectly split later rather than doing it directly.
llvm-svn: 264928
On AMDGPU we want to be able to promote i64/f64 loads to v2i32.
If the access is unaligned, this would conclude that since i64 is legal,
it would convert it back to i64 and there is an endless legalization
loop.
Extract the logic for scalarizing the load into a new TargetLowering
function, where this can also replace the custom function AMDGPU
has for this.
llvm-svn: 264927
Widening a PHI requires us to insert a trunc.
The logical place for this trunc is in the same BB as the PHI.
This is not possible if the BB is terminated by a catchswitch.
This fixes PR27133.
llvm-svn: 264926
Fix for issue introduced D17297, where we were breaking early from the loop detecting consecutive loads which could leave us thinking a consecutive load with zeros was possible.
llvm-svn: 264922
Summary:
Currently it's a module pass. Make it a function pass so that we can
move it to PassManagerBuilder's EP_EarlyAsPossible extension point,
which only accepts function passes.
Reviewers: rnk
Subscribers: tra, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D18615
llvm-svn: 264919
Summary:
This gives callers flexibility to pass lambdas with captures, which lets
callers avoid the C-style void*-ptr closure style. (Currently, callers
in clang store state in the PassManagerBuilderBase arg.)
No functional change, and the new API is backwards-compatible.
Reviewers: chandlerc
Subscribers: joker.eph, cfe-commits
Differential Revision: http://reviews.llvm.org/D18613
llvm-svn: 264918
This change prevents the loop vectorizer from vectorizing when all of the vector
types it generates will be scalarized. I've run into this problem on the PPC's QPX
vector ISA, which only holds floating-point vector types. The loop vectorizer
will, however, happily vectorize loops with purely integer computation. Here's
an example:
LV: The Smallest and Widest types: 32 / 32 bits.
LV: The Widest register is: 256 bits.
LV: Found an estimated cost of 0 for VF 1 For instruction: %indvars.iv25 = phi i64 [ 0, %entry ], [ %indvars.iv.next26, %for.body ]
LV: Found an estimated cost of 0 for VF 1 For instruction: %arrayidx = getelementptr inbounds [1600 x i32], [1600 x i32]* %a, i64 0, i64 %indvars.iv25
LV: Found an estimated cost of 0 for VF 1 For instruction: %2 = trunc i64 %indvars.iv25 to i32
LV: Found an estimated cost of 1 for VF 1 For instruction: store i32 %2, i32* %arrayidx, align 4
LV: Found an estimated cost of 1 for VF 1 For instruction: %indvars.iv.next26 = add nuw nsw i64 %indvars.iv25, 1
LV: Found an estimated cost of 1 for VF 1 For instruction: %exitcond27 = icmp eq i64 %indvars.iv.next26, 1600
LV: Found an estimated cost of 0 for VF 1 For instruction: br i1 %exitcond27, label %for.cond.cleanup, label %for.body
LV: Scalar loop costs: 3.
LV: Found an estimated cost of 0 for VF 2 For instruction: %indvars.iv25 = phi i64 [ 0, %entry ], [ %indvars.iv.next26, %for.body ]
LV: Found an estimated cost of 0 for VF 2 For instruction: %arrayidx = getelementptr inbounds [1600 x i32], [1600 x i32]* %a, i64 0, i64 %indvars.iv25
LV: Found an estimated cost of 0 for VF 2 For instruction: %2 = trunc i64 %indvars.iv25 to i32
LV: Found an estimated cost of 2 for VF 2 For instruction: store i32 %2, i32* %arrayidx, align 4
LV: Found an estimated cost of 1 for VF 2 For instruction: %indvars.iv.next26 = add nuw nsw i64 %indvars.iv25, 1
LV: Found an estimated cost of 1 for VF 2 For instruction: %exitcond27 = icmp eq i64 %indvars.iv.next26, 1600
LV: Found an estimated cost of 0 for VF 2 For instruction: br i1 %exitcond27, label %for.cond.cleanup, label %for.body
LV: Vector loop of width 2 costs: 2.
LV: Found an estimated cost of 0 for VF 4 For instruction: %indvars.iv25 = phi i64 [ 0, %entry ], [ %indvars.iv.next26, %for.body ]
LV: Found an estimated cost of 0 for VF 4 For instruction: %arrayidx = getelementptr inbounds [1600 x i32], [1600 x i32]* %a, i64 0, i64 %indvars.iv25
LV: Found an estimated cost of 0 for VF 4 For instruction: %2 = trunc i64 %indvars.iv25 to i32
LV: Found an estimated cost of 4 for VF 4 For instruction: store i32 %2, i32* %arrayidx, align 4
LV: Found an estimated cost of 1 for VF 4 For instruction: %indvars.iv.next26 = add nuw nsw i64 %indvars.iv25, 1
LV: Found an estimated cost of 1 for VF 4 For instruction: %exitcond27 = icmp eq i64 %indvars.iv.next26, 1600
LV: Found an estimated cost of 0 for VF 4 For instruction: br i1 %exitcond27, label %for.cond.cleanup, label %for.body
LV: Vector loop of width 4 costs: 1.
...
LV: Selecting VF: 8.
LV: The target has 32 registers
LV(REG): Calculating max register usage:
LV(REG): At #0 Interval # 0
LV(REG): At #1 Interval # 1
LV(REG): At #2 Interval # 2
LV(REG): At #4 Interval # 1
LV(REG): At #5 Interval # 1
LV(REG): VF = 8
The problem is that the cost model here is not wrong, exactly. Since all of
these operations are scalarized, their cost (aside from the uniform ones) are
indeed VF*(scalar cost), just as the model suggests. In fact, the larger the VF
picked, the lower the relative overhead from the loop itself (and the
induction-variable update and check), and so in a sense, picking the largest VF
here is the right thing to do.
The problem is that vectorizing like this, where all of the vectors will be
scalarized in the backend, isn't really vectorizing, but rather interleaving.
By itself, this would be okay, but then the vectorizer itself also interleaves,
and that's where the problem manifests itself. There's aren't actually enough
scalar registers to support the normal interleave factor multiplied by a factor
of VF (8 in this example). In other words, the problem with this is that our
register-pressure heuristic does not account for scalarization.
While we might want to improve our register-pressure heuristic, I don't think
this is the right motivating case for that work. Here we have a more-basic
problem: The job of the vectorizer is to vectorize things (interleaving aside),
and if the IR it generates won't generate any actual vector code, then
something is wrong. Thus, if every type looks like it will be scalarized (i.e.
will be split into VF or more parts), then don't consider that VF.
This is not a problem specific to PPC/QPX, however. The problem comes up under
SSE on x86 too, and as such, this change fixes PR26837 too. I've added Sanjay's
reduced test case from PR26837 to this commit.
Differential Revision: http://reviews.llvm.org/D18537
llvm-svn: 264904
PGOFuncNames are used as the key to retrieve the Function definition from the
MD5 stored in the profile. For internal linkage function, we prefix the source
file name to the PGOFuncNames. LTO's internalization privatizes many global linkage
symbols. This happens after value profile annotation, but those internal
linkage functions should not have a source prefix. To differentiate compiler
generated internal symbols from original ones, PGOFuncName meta data are
created and attached to the original internal symbols in the value profile
annotation step. If a symbol does not have the meta data, its original linkage
must be non-internal.
Also add a new map that maps PGOFuncName's MD5 value to the function definition.
Differential Revision: http://reviews.llvm.org/D17895
llvm-svn: 264902
Using ArrayRef in annotateValueSite's parameter instead of using an array
and it's size.
Differential Revision: http://reviews.llvm.org/D18568
llvm-svn: 264879
Summary:
This results in higher register usage, but should make it easier for
the compiler to hide latency.
This pass is a prerequisite for some more scheduler improvements, and I
think the increase register usage with this patch is acceptable, because
when combined with the scheduler improvements, the total register usage
will decrease.
shader-db stats:
2382 shaders in 478 tests
Totals:
SGPRS: 48672 -> 49088 (0.85 %)
VGPRS: 34148 -> 34847 (2.05 %)
Code Size: 1285816 -> 1289128 (0.26 %) bytes
LDS: 28 -> 28 (0.00 %) blocks
Scratch: 492544 -> 573440 (16.42 %) bytes per wave
Max Waves: 6856 -> 6846 (-0.15 %)
Wait states: 0 -> 0 (0.00 %)
Depends on D18451
Reviewers: nhaehnle, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18452
llvm-svn: 264876
For compatability with GAS, nop and nopr are recognized as alises for
bc and bcr, respectively. A mask of 0 turns these instructions
effectively into no-operations.
Reviewed by Ulrich Weigand.
llvm-svn: 264875
These checks are redundant and can be removed
Reviewers: hans
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D18564
llvm-svn: 264872
This reverts commit r264869. I am seeing Windows bot failures due to the
"\" in the path being mishandled at some point (seems to be interpreted
wrongly at some point and llvm-as | llvm-dis is yielding some junk
characters). Need to investigate.
llvm-svn: 264871
XOP's VPPERM has some great 'permute operations' that it can do as well as part of shuffling the bytes of a 128-bit vector - in this case we use it to perform BITREVERSE in a single instruction.
llvm-svn: 264870
Summary:
This change serializes out and in the SourceFileName to LLVM assembly
so that it is preserved through "llvm-dis | llvm-as". This is
necessary to ensure that the global identifiers created for local values
in the module summary index are the same even if the bitcode is
streamed out and read back from LLVM assembly.
Serializing the summary itself to LLVM assembly is in progress.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18588
llvm-svn: 264869
We already try not to truncate PHIs in computeMinimalBitwidths. LoopVectorize can't handle it and we really don't need to, because both induction and reduction PHIs are truncated by other means.
However, we weren't bailing out in all the places we should have, and we ended up by returning a PHI to be truncated, which has caused PR27018.
This fixes PR17018.
llvm-svn: 264852
operations.
Specifically, we had code that tried to badly approximate reconstructing
all of the possible variations on addressing modes in two x86
instructions based on those in one pseudo instruction. This is not the
first bug uncovered with doing this, so stop doing it altogether.
Instead generically and pedantically copy every operand from the address
over to both new instructions, and strip kill flags from any register
operands.
This fixes a subtle bug seen in the wild where we would mysteriously
drop parts of the addressing mode, causing for example the index
argument in the added test case to just be completely ignored.
Hypothetically, this was an extremely bad miscompile because it actually
caused a predictable and leveragable write of a 64bit quantity to an
unintended offset (the first element of the array intead of whatever
other element was intended). As a consequence, in theory this could even
have introduced security vulnerabilities.
However, this was only something that could happen with an atomic
floating point add. No other operation could trigger this bug, so it
seems extremely unlikely to have occured widely in the wild.
But it did in fact occur, and frequently in scientific applications
which were using relaxed atomic updates of a floating point value after
adding a delta. Those would end up being quite badly miscompiled by
LLVM, which is how we found this. Of course, this often looks like
a race condition in the code, but it was actually a miscompile.
I suspect that this whole RELEASE_FADD thing was a complete mistake.
There is no such operation, and I worry that anything other than add
will get remarkably worse codegeneration. But that's not for this
change....
llvm-svn: 264845
Prior to this patch, the MemorySSA caching visitor would cache all
calls that it visited. When paired with phi optimization, this can be
problematic. Consider:
define void @foo() {
; 1 = MemoryDef(liveOnEntry)
call void @clobberFunction()
br i1 undef, label %if.end, label %if.then
if.then:
; MemoryUse(??)
call void @readOnlyFunction()
; 2 = MemoryDef(1)
call void @clobberFunction()
br label %if.end
if.end:
; 3 = MemoryPhi(...)
; MemoryUse(?)
call void @readOnlyFunction()
ret void
}
When optimizing MemoryUse(?), we visit defs 1 and 2, so we note to
cache them later. We ultimately end up not being able to optimize
passed the Phi, so we set MemoryUse(?) to point to the Phi. We then
cache the clobbering call for def 1 to be the Phi.
This commit changes this behavior so that we wipe out any calls
added to VisistedCalls while visiting the defs of a phi we couldn't
optimize.
Aside: With this patch, we now can bootstrap clang/LLVM without a
single MemorySSA verifier failure. Woohoo. :)
llvm-svn: 264820
This patch teaches the caching MemorySSA walker a few things:
1. Not to walk Phis we've walked before. It seems that we tried to do
this before, but it didn't work so well in cases like:
define void @foo() {
%1 = alloca i8
%2 = alloca i8
br label %begin
begin:
; 3 = MemoryPhi({%0,liveOnEntry},{%end,2})
; 1 = MemoryDef(3)
store i8 0, i8* %2
br label %end
end:
; MemoryUse(?)
load i8, i8* %1
; 2 = MemoryDef(1)
store i8 0, i8* %2
br label %begin
}
Because we wouldn't put Phis in Q.Visited until we tried to visit them.
So, when trying to optimize MemoryUse(?):
- We would visit 3 above
- ...Which would make us put {%0,liveOnEntry} in Q.Visited
- ...Which would make us visit {%0,liveOnEntry}
- ...Which would make us put {%end,2} in Q.Visited
- ...Which would make us visit {%end,2}
- ...Which would make us visit 3
- ...Which would realize we've already visited everything in 3
- ...Which would make us conservatively return 3.
In the added test-case, (@looped_visitedonlyonce) this behavior would
cause us to give incorrect results. Specifically, we'd visit 4 twice
in the same query, but on the second visit, we'd skip while.cond because
it had been visited, visit if.then/if.then2, and cache "1" as the
clobbering def on the way back.
2. If we try to walk the defs of a {Phi,MemLoc} and see it has been
visited before, just hand back the Phi we're trying to optimize.
I promise this isn't as terrible as it seems. :)
We now insert {Phi,MemLoc} pairs just before walking the Phi's upward
defs. So, we check the cache for the {Phi,MemLoc} pair before checking
if we've already walked the Phi.
The {Phi,MemLoc} pair is (almost?) always guaranteed to have a cache
entry if we've already fully walked it, because we cache as we go.
So, if the {Phi,MemLoc} pair isn't in cache, either:
(a) we must be in the process of visiting it (in which case, we can't
give a better answer in a cache-as-we-go DFS walker)
(b) we visited it, but didn't cache it on the way back (...which seems
to require `ModifyingAccess` to not dominate `StartingAccess`,
so I'm 99% sure that would be an error. If it's not an error, I
haven't been able to get it to happen locally, so I suspect it's
rare.)
- - - - -
As a consequence of this change, we no longer skip upward defs of phis,
so we can kill the `VisitedOnlyOne` check. This gives us better accuracy
than we had before, at the cost of potentially doing a bit more work
when we have a loop.
llvm-svn: 264814
This is effectively NFC, minus the renaming of the options
(-cyclone-prefetch-distance -> -prefetch-distance).
The change was requested by Tim in D17943.
llvm-svn: 264806
We have known races on profile counters, which can be reproduced by enabling
-fsanitize=thread and -fprofile-instr-generate simultaneously on a
multi-threaded program. This patch avoids reporting those races by not
instrumenting the reads and writes coming from the instruction profiler.
llvm-svn: 264805
During ADCE, track which debug info scopes still have live references
from the code, and delete debug info intrinsics for the dead ones.
These intrinsics describe the locations of variables (in registers or
stack slots). If there's no code left corresponding to a variable's
scope, then there's no way to reference the variable in the debugger and
it doesn't matter what its value is.
I add a DEBUG printout when the described location in an SSA register,
in case it helps some trying to track down why locations get lost.
However, we still delete these; the scope itself isn't attached to any
real code, so the ship has already sailed.
llvm-svn: 264800
This makes check failures much easier to understand.
Make it empty (but leave it in the class) for NDEBUG builds.
Differential Revision: http://reviews.llvm.org/D18529
llvm-svn: 264780
They were previously expanded to CAS loops in a custom isel expansion,
but AtomicExpandPass knows how to do that generically.
Testing is covered by the existing sparc atomics.ll testcases.
llvm-svn: 264771
Create a common accessor, DbgInfoIntrinsic::getVariableLocation, which
doesn't care about the type of debug info intrinsic. Use this to
further unify the implementations of DbgDeclareInst::getAddress and
DbgValueInst::getValue.
Besides being a cleanup, I'm planning to use this to prepare DEBUG
output without having to branch on the concrete type.
llvm-svn: 264767
Since we have moved to a model where functions are imported in bulk from
each source module after making summary-based importing decisions, there
is no longer a need to link metadata as a postpass, and all users have
been removed.
This essentially reverts r255909 and follow-on fixes.
llvm-svn: 264763
Add function soft attribute to the generation of Jump Tables in CodeGen
as initial step towards clang support of gcc's no-jump-table support
Reviewers: hans, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18321
llvm-svn: 264756
Summary:
Check that any function that has the property set is free of virtual
register operands.
Also, it is actually VirtRegMap (and not the register allocators) that
acutally remove the VReg operands (except for RegAllocFast).
Reviewers: qcolombet
Subscribers: MatzeB, llvm-commits, qcolombet
Differential Revision: http://reviews.llvm.org/D18535
llvm-svn: 264755
MatchBinaryOp abstracts out the IR instructions from the operations they
represent. While this change is NFC, we will use this factoring later
to map things like `(extractvalue 0 (sadd.with.overflow X Y))` to `(add
X Y)`.
llvm-svn: 264747
Summary:
However, this has no effect at this time because the instructions affected
are marked 'isCodeGenOnly=1' and have no alternative for the MC layer.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18179
llvm-svn: 264712
Fixed fp_to_uint instruction selection on KNL.
One pattern was missing for <4 x double> to <4 x i32>
Differential Revision: http://reviews.llvm.org/D18512
llvm-svn: 264701
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264697
Split RegisterOperands code that collects defs/uses into a variant with
and without lanemask tracking. This is a bit of code duplication, but
there are enough subtle differences between the two variants that this
seems cleaner (and potentially faster).
This also fixes a problem where lanes where tracked even though
TrackLaneMasks was false. This is part of the fix for
http://llvm.org/PR27106. I will commit the testcase when it is
completely fixed.
llvm-svn: 264696
Instead of using two feature bits, one to indicate the availability of the
popcnt[dw] instructions, and another to indicate whether or not they're fast,
use a single enum. This allows more consistent control via target attribute
strings, and via Clang's command line.
llvm-svn: 264690
Minimum density for both optsize and non optsize are now options
-sparse-jump-table-density (default 10) for non optsize functions
-dense-jump-table-density (default 40) for optsize functions, which
matches the current default. This improves several benchmarks at google
at the cost of a small codesize increase. For code compiled with -Os,
the old behavior continues
llvm-svn: 264689
Personality is copied as part of copyFunctionAttributes, but it is
invalid on a declaration. Remove the personality attribute it the
function body is not cloned.
Also add a verifier run over output modules in the llvm-split tool.
llvm-svn: 264667
If all a BUILD_VECTOR's source elements are the same bit (AND/XOR/OR) operation type and each has one constant operand, lower to a pair of BUILD_VECTOR and just apply the bit operation to the vectors.
The constant operands will form a constant vector meaning that we still only have a single BUILD_VECTOR to lower and we will have replaced all the scalarized operations with a single SSE equivalent.
Its not in our interest to start make a general purpose vectorizer from this, but I'm seeing enough of these scalar bit operations from the later legalization/scalarization stages to support them at least.
Differential Revision: http://reviews.llvm.org/D18492
llvm-svn: 264666
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
What's changed since the original commit?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I weakened the CHECK lines in instrprof-comdat.h to account for the
fact that there have been bugfixes to clang coverage. These will be
fixed up in a follow-up.
- I added an assert to make sure we don't get bitten by this again.
- I constructed the c-general.profraw file without name compression
enabled to appease some bots.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264658
A DICompileUnit that is not listed in llvm.dbg.cu will cause assertion
failures and/or crashes in the backend. The Verifier should reject this.
rdar://problem/25369499
llvm-svn: 264657
This is a fix for PR26941.
When there is both a section and a global definition with the same
name, the global wins.
Section symbols are not added to the symbol table; section references
are left undefined and fixed up in the object writer unless they've
been satisfied by some other definition.
llvm-svn: 264649
On OS X El Capitan and iOS 9, the linker supports a new section
attribute, live_support, which allows dead stripping to remove dead
globals along with the ASAN metadata about them.
With this change __asan_global structures are emitted in a new
__DATA,__asan_globals section on Darwin.
Additionally, there is a __DATA,__asan_liveness section with the
live_support attribute. Each entry in this section is simply a tuple
that binds together the liveness of a global variable and its ASAN
metadata structure. Thus the metadata structure will be alive if and
only if the global it references is also alive.
Review: http://reviews.llvm.org/D16737
llvm-svn: 264645
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
This reverts the revert commit beaf3d18. What's changed?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I updated the expected counts in instrprof-comdat.h to account for
the fact that there have been bugfixes to clang coverage.
- I added an assert to make sure we don't get bitten by this again.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264641
Summary:
Hopefully this will make it easier for the next person to figure all
this out...
Reviewers: bogner, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18490
llvm-svn: 264611
The A2 cores support the popcntw/popcntd instructions, but they're microcoded,
and slower than our default software emulation. Specifically, popcnt[dw] take
approximately 74 cycles, whereas our software emulation takes only 24-28
cycles.
I've added a new target feature to indicate a slow popcnt[dw], instead of just
removing the existing target feature from the a2/a2q processor models, because:
1. This allows us to return more accurate information via the TTI interface
(I recognize that this currently makes no practical difference)
2. Is hopefully easier to understand (it allows the core's features to match
its manual while still having the desired effect).
llvm-svn: 264600
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264596
Don't set the function hotness attribute on the fly. This changes the CFG
branch probability of the caller function, which leads to inconsistent BB
ordering. This patch moves the attribute setting to a separated loop after
the counts in all functions are populated.
Fixes PR27024 - PGO instrumentation profile data is not reflected in correct
basic blocks.
Differential Revision: http://reviews.llvm.org/D18491
llvm-svn: 264594
MachineFunctionProperties represents a set of properties that a MachineFunction
can have at particular points in time. Existing examples of this idea are
MachineRegisterInfo::isSSA() and MachineRegisterInfo::tracksLiveness() which
will eventually be switched to use this mechanism.
This change introduces the AllVRegsAllocated property; i.e. the property that
all virtual registers have been allocated and there are no VReg operands
left.
With this mechanism, passes can declare that they require a particular property
to be set, or that they set or clear properties by implementing e.g.
MachineFunctionPass::getRequiredProperties(). The MachineFunctionPass base class
verifies that the requirements are met, and handles the setting and clearing
based on the delcarations. Passes can also directly query and update the current
properties of the MF if they want to have conditional behavior.
This change annotates the target-independent post-regalloc passes; future
changes will also annotate target-specific ones.
Reviewers: qcolombet, hfinkel
Differential Revision: http://reviews.llvm.org/D18421
llvm-svn: 264593
Summary:
This helps prevent load clustering from drastically increasing register
pressure by trying to cluster 4 SMRDx8 loads together. The limit of 16
bytes was chosen, because it seems like that was the original intent
of setting the limit to 4 instructions, but more analysis could show
that a different limit is better.
This fixes yields small decreases in register usage with shader-db, but
also helps avoid a large increase in register usage when lane mask
tracking is enabled in the machine scheduler, because lane mask tracking
enables more opportunities for load clustering.
shader-db stats:
2379 shaders in 477 tests
Totals:
SGPRS: 49744 -> 48600 (-2.30 %)
VGPRS: 34120 -> 34076 (-0.13 %)
Code Size: 1282888 -> 1283184 (0.02 %) bytes
LDS: 28 -> 28 (0.00 %) blocks
Scratch: 495616 -> 492544 (-0.62 %) bytes per wave
Max Waves: 6843 -> 6853 (0.15 %)
Wait states: 0 -> 0 (0.00 %)
Reviewers: nhaehnle, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18451
llvm-svn: 264589
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264587
- Do not optimize stack slots in optnone functions.
- Get aligned-base register from HexagonMachineFunctionInfo instead of
looking for ALIGNA instruction in the function's body.
llvm-svn: 264580
ICMP instruction selection fails on SKX and KNL for i1 operand.
I use XOR to resolve:
(A == B) is equivalent to (A xor B) == 0
Differential Revision: http://reviews.llvm.org/D18511
llvm-svn: 264566
When emitting coverage mappings for functions with local linkage and an
unknown filename, we use "<unknown>:func" for the PGO function name. The
problem is that we don't strip "<unknown>" from the name when loading
coverage data, like we do for other file names. Fix that and add a test.
llvm-svn: 264559
Change writeFunctionMetadata to call writeMetadataRecords. For now
there's no functionality change, but makes it easy to serialize other
types of metadata in the function block in the future.
llvm-svn: 264557
To match writeMetadataRecords, writeNamedMetadata and
writeMetadataStrings, change:
WriteModuleMetadata => writeModuleMetadata
WriteFunctionLocalMetadata => writeFunctionMetadata
Write##CLASS => write##CLASS
The only major change is "FunctionLocal" => "Function". The point is to
be less specific, in preparation for emitting normal metadata records
inside function metadata blocks (currently we only emit
`LocalAsMetadata` there).
llvm-svn: 264556
We don't really need a separate vector here; instead, point at a range
inside the main MDs array. This matches how r264551 references the
ranges of strings and non-strings.
llvm-svn: 264552
Spiritually reapply commit r264409 (reverted in r264410), albeit with a
bit of a redesign.
Firstly, avoid splitting the big blob into multiple chunks of strings.
r264409 imposed an arbitrary limit to avoid a massive allocation on the
shared 'Record' SmallVector. The bug with that commit only reproduced
when there were more than "chunk-size" strings. A test for this would
have been useless long-term, since we're liable to adjust the chunk-size
in the future.
Thus, eliminate the motivation for chunk-ing by storing the string sizes
in the blob. Here's the layout:
vbr6: # of strings
vbr6: offset-to-blob
blob:
[vbr6]: string lengths
[char]: concatenated strings
Secondly, make the output of llvm-bcanalyzer readable.
I noticed when debugging r264409 that llvm-bcanalyzer was outputting a
massive blob all in one line. Past a small number, the strings were
impossible to split in my head, and the lines were way too long. This
version adds support in llvm-bcanalyzer for pretty-printing.
<STRINGS abbrevid=4 op0=3 op1=9/> num-strings = 3 {
'abc'
'def'
'ghi'
}
From the original commit:
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
llvm-svn: 264551
The implementation is fairly obvious. This is preparation for using
some blobs in bitcode.
For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.
This isn't strictly necessary the two memory objects we have:
- The return of RawMemoryObject::getPointer is valid until the memory
object is destroyed.
- StreamingMemoryObject::getPointer is valid until the next chunk is
read from the stream. Since the JumpToBit call is only going ahead
to a word boundary, we'll never load another chunk.
However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.
I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.
llvm-svn: 264549
Add API to SimpleBitstreamCursor to allow users to translate between
byte addresses and pointers.
- jumpToPointer: move the bit position to a particular pointer.
- getPointerToByte: get the pointer for a particular byte.
- getPointerToBit: get the pointer for the byte of the current bit.
- getCurrentByteNo: convenience function for assertions and tests.
Mainly adds unit tests (getPointerToBit/Byte already has a use), but
also preparation for eventually using jumpToPointer.
llvm-svn: 264546
Split out SimpleBitstreamCursor from BitstreamCursor, which is a
lower-level cursor with no knowledge of bitcode blocks, abbreviations,
or records. It just knows how to read bits and navigate the stream.
This is mainly organizational, to separate the API for manipulating raw
bits from that for bitcode concepts like Record and Block.
llvm-svn: 264545
Summary:
Add a statistic to count the number of imported functions. Also, add a
new -print-imports option to emit a trace of imported functions, that
works even for an NDEBUG build.
Note that emitOptimizationRemark does not work for the above printing as
it expects a Function object and DebugLoc, neither of which we have
with summary-based importing.
This is part 2 of D18487, the first part was committed separately as
r264536.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18487
llvm-svn: 264537
With r264503, aliases are now being added to the GlobalsToImport set
even when their aliasees can't be imported due to their linkage type.
While the importing worked correctly (the aliases imported as
declarations) due to the logic in doImportAsDefinition, there is no
point to adding them to the GlobalsToImport set.
Additionally, with D18487 it was resulting in incorrectly printing a
message indicating that the alias was imported.
To avoid this, delay adding aliases to the GlobalsToImport set until
after the linkage type of the aliasee is checked.
This patch is part of D18487.
llvm-svn: 264536
Intrinsic::maxnum and Intrinsic::minnum, along with the associated libc
function calls (fmax[f], etc.) generally map to function calls after lowering.
For some vector types with QPX at least, however, we can legally lower these,
and we don't need to prohibit CTR-based loops on their account.
It turned out, however, that the logic that checked the opcodes associated with
intrinsics was broken (it would set the Opcode variable, but that variable was
later checked only if set for some otherwise-external function call.
This fixes the latter problem and adds the FMAX/MINNUM mappings.
llvm-svn: 264532
Reject the following IR as malformed (assuming that %entry, %next are
not in a loop):
next:
%y = phi i32 [ 0, %entry ]
%x = phi i32 [ %y, %entry ]
Such PHI nodes came up in PR26718. While there was no consensus on
whether or not this is valid IR, most opinions on that bug and in a
discussion on the llvm-dev mailing list tended towards a
"strict interpretation" (term by Joseph Tremoulet) of PHI node uses.
Also, the language reference explicitly states that "the use of each
incoming value is deemed to occur on the edge from the corresponding
predecessor block to the current block" and
`DominatorTree::dominates(Instruction*, Use&)` uses this definition as
well.
For the code mentioned in PR15384, clang does not compile to such PHIs
(anymore?). The test case still hangs when replacing `%tmp6` with `%tmp`
in revisions before r176366 (where PR15384 has been fixed). The
occurrence of %tmp6 therefore was probably unintentional. Its value is
not used except in other PHIs.
Reviewers: majnemer, reames, JosephTremoulet, bkramer, grosser, jdoerfert, kparzysz, sanjoy
Differential Revision: http://reviews.llvm.org/D18443
llvm-svn: 264528
This reverts commit fa36fcff16c7d4f78204d6296bf96c3558a4a672.
Causes the following Windows failure:
C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\lib\CodeGen\MachineInstr.cpp(762):
error C2338: must be trivially copyable to memmove
llvm-svn: 264516
Summary: isPodLike is as close as we have for is_trivially_copyable.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18483
llvm-svn: 264515
Currently this is to mainly to prevent scalarization of integer division by constants.
Differential Revision: http://reviews.llvm.org/D18307
llvm-svn: 264511
LowerMul v32i8 on AVX2 needs to split the 256-bit sources to allow sign-extension back to v16i16 to occur. Since this is basically the same as Lower256IntArith we simplify by using that here instead.
llvm-svn: 264506
Summary:
Now that the summary contains the full reference/call graph, we can
replace the existing function importer that loads and inspect the IR
to iteratively walk the call graph by a traversal based purely on the
summary information. Decouple the actual importing decision from any
IR manipulation.
Reviewers: tejohnson
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18343
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264503
the rename operation on 3 error conditions of ReplaceFileW() that it was
previously bailing out on.
Patch by Douglas Yung!
Differential Revision: http://reviews.llvm.org/D17903
llvm-svn: 264477
A release fence acts as a publication barrier for stores within the current thread to become visible to other threads which might observe the release fence. It does not require the current thread to observe stores performed on other threads. As a result, we can allow store-load and load-load forwarding across a release fence.
We choose to be much more conservative about stores. In theory, nothing prevents us from shifting a store from after a release fence to before it, and then eliminating the preceeding (previously fenced) store. Doing this without actually moving the second store is likely also legal, but we chose to be conservative at this time.
The LangRef indicates only atomic loads and stores are effected by fences. This patch chooses to be far more conservative then that.
This is the GVN companion to http://reviews.llvm.org/D11434 which applied the same logic in EarlyCSE and has been baking in tree for a while now.
Differential Revision: http://reviews.llvm.org/D11436
llvm-svn: 264472
method instead.
This is not quite a named constructor: Construction may fail, and
MachOObjectFiles are usually passed by unique_ptr anyway, so create
returns an Expected<std::unique_ptr<MachOObjectFile>>.
llvm-svn: 264469
When encountering instructions with regmasks, instead of cleaning up all the
elements in MaybeDeadCopies map, remove only the instructions erased. By keeping
more instruction in MaybeDeadCopies, this change will expose more dead copies
across instructions with regmasks.
llvm-svn: 264462
When merging stores in DAGCombiner, add check to ensure that no
dependenices exist that would cause the construction of a cycle in our
DAG. This may happen if one store has a data dependence on another
instruction (e.g. a load) which itself has a (chain) dependence on
another store being merged. These stores cannot be merged safely and
doing so results in a cycle that is discovered in LegalizeDAG.
This test is only done in cases where Antialias analysis is used (UseAA)
as non-AA store merge candidates will be merged logically after all
loads which have been checked to not alias.
Reviewers: ahatanak, spatel, niravd, arsenm, hfinkel, tstellarAMD, jyknight
Subscribers: llvm-commits, tberghammer, danalbert, srhines
Differential Revision: http://reviews.llvm.org/D18336
llvm-svn: 264461
This changes RS4GC to lower calls to ``@llvm.experimental.deoptimize``
to gc.statepoints wrapping ``__llvm_deoptimize``, and changes
``callsGCLeafFunction`` to recognize ``@llvm.experimental.deoptimize``
as a non GC leaf function.
I've had to hard code the ``"__llvm_deoptimize"`` name in
RewriteStatepointsForGC; since ``TargetLibraryInfo`` is available only
during codegen. This isn't without precedent in the codebase, so I'm
not overtly concerned.
llvm-svn: 264456
This fixes a use-after-free introduced 3 years ago, in r182872 ;)
The code more or less worked because the memory that CopyMI was
pointing to happened to still be valid, but lots of tests would crash
if you ran under ASAN with the recycling allocator changes from
llvm.org/PR26808
llvm-svn: 264455
It is possible to have a fallthrough MBB prior to MBB placement. The original
addition of the BB would result in reordering the BB as not preceding the
successor. Because of the fallthrough nature of the BB, we could end up
executing incorrect code or even a constant pool island! Insert the spliced BB
into the same location to avoid that.
Thanks to Tim Northover for invaluable hints and Fiora for the discussion on
what may have been occurring!
llvm-svn: 264454
We're erasing MI here, but then immediately using it again inside the
`if`. This moves the erase after we're done using it.
Doing that reveals a second problem though - this case is missing a
break, so we fall through to the default and dereference MI again.
This is obviously a bug, though I don't know how to write a test that
triggers it - all we do in the error case is print some extra debug
output.
Both of these issue crash on lots of tests under ASAN with the
recycling allocator changes from PR26808 applied.
llvm-svn: 264442
64-bit, 32-bit and 16-bit move-immediate instructions are 7, 6, and 5 bytes,
respectively, whereas and/or with 8-bit immediate is only three bytes.
Since these instructions imply an additional memory read (which the CPU could
elide, but we don't think it does), restrict these patterns to minsize functions.
Differential Revision: http://reviews.llvm.org/D18374
llvm-svn: 264440
Now register parameters that aren't saved to the stack or CSRs are
considered dead after the first call. Previously the debugger would show
whatever was in the register.
Fixes PR26589
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D17211
llvm-svn: 264429
Optimize output of MDStrings in bitcode. This emits them in big blocks
(currently 1024) in a pair of records:
- BULK_STRING_SIZES: the sizes of the strings in the block, and
- BULK_STRING_DATA: a single blob, which is the concatenation of all
the strings.
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
I needed to add support for blobs to streaming input to get the test
suite passing.
- StreamingMemoryObject::getPointer reads ahead and returns the
address of the blob.
- To avoid a possible reallocation of StreamingMemoryObject::Bytes,
BitstreamCursor::readRecord needs to move the call to JumpToEnd
forward so that getPointer is the last bitstream operation.
llvm-svn: 264409
LowerShift was using the same code as Lower256IntArith to split 256-bit vectors into 2 x 128-bit vectors, so now we just call Lower256IntArith.
llvm-svn: 264403
Differential Revision: http://reviews.llvm.org/D18456
This is a re-commit of r264387 and r264388 after fixing a typo.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264392
This reverts commit r264387.
Bots are broken in various ways, I need to take one commit at a time...
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264390
This reverts commit r264388.
Bots are broken in various ways, I need to take one commit at a time...
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264389
Summary:
Loading IR with debug info improves MDString::get() from 19ms to 10ms.
This is a rework of D16597 with adding an "emplace" method on the StringMap
to avoid requiring the MDString move ctor to be public.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17920
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264386
Summary:
StringMap ctor accepts an initialize size, but expect it to be
rounded to the next power of 2. The ctor can handle that directly
instead of expecting clients to round it. Also, since the map will
resize itself when 75% full, take this into account an initialize
a larger initial size to avoid any growth.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18344
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264385
Summary:
These are just helpers calling their static counter part to
simplify client code.
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18339
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264382
The motivation for MODULE_CODE_METADATA_VALUES was to enable an
-flto=thin scheme where:
1. First, one function is cherry-picked from a bitcode file.
2. Later, another function is cherry-picked.
3. Later, ...
4. Finally, the metadata needed by all the previous functions is
loaded.
This was abandoned in favour of:
1. Calculate the superset of functions needed from a Module.
2. Link all functions at once.
Delayed metadata reading no longer serves a purpose. It also adds
a few complication, since we can't count on metadata being properly
parsed when exiting the BitcodeReader. After discussing with Teresa, we
agreed to remove it.
The code that depended on this was removed/updated in r264326.
llvm-svn: 264378
This is the same as r255936, with added logic for avoiding clobbering of the
red zone (PR26023).
Differential Revision: http://reviews.llvm.org/D18246
llvm-svn: 264375
Remove logic to upgrade !llvm.loop by changing the MDString tag
directly. This old logic would check (and change) arbitrary strings
that had nothing to do with loop metadata. Instead, check !llvm.loop
attachments directly, and change which strings get attached.
Rather than updating the assembly-based upgrade, drop it entirely. It
has been quite a while since we supported upgrading textual IR.
llvm-svn: 264373
This reserves an MDKind for !llvm.loop, which allows callers to avoid a
string-based lookup. I'm not sure why it was missing.
There should be no functionality change here, just a small compile-time
speedup.
llvm-svn: 264371
We did not have an explicit branch to the continuation BB. When the check was
hoisted, this could permit control follow to fall through into the division
trap. Add the explicit branch to the continuation basic block to ensure that
code execution is correct.
llvm-svn: 264370
It is incorrect to get the corresponding MBB for a ReturnInst before
SelectAllBasicBlocks since SelectAllBasicBlocks can change the
correspondence between a ReturnInst and the MBB it is in.
PR27062
llvm-svn: 264358
Earlier we were ignoring varargs in LowerCallSiteWithDeoptBundle because
populateCallLoweringInfo does not set CallLoweringInfo::IsVarArg.
llvm-svn: 264354
We try to hoist the insertion point as high as possible to encourage
sharing. However, we must be careful not to hoist into a catchswitch as
it is both an EHPad and a terminator.
llvm-svn: 264344
Summary:
Only adds support for "naked" calls to llvm.experimental.deoptimize.
Support for round-tripping through RewriteStatepointsForGC will come
as a separate patch (should be simpler than this one).
Reviewers: reames
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18429
llvm-svn: 264329
In PIC mode, the registers R14, R15 and R28 are reserved for use by
the PLT handling code. This causes all functions to clobber these
registers. While this is not new for regular function calls, it does
also apply to save/restore functions, which do not follow the standard
ABI conventions with respect to the volatile/non-volatile registers.
Patch by Jyotsna Verma.
llvm-svn: 264324
Given that StatepointLowering now uniques derived pointers before
putting them in the per-statepoint spill map, we may end up with missing
entries for derived pointers when we visit a gc.relocate on a pointer
that was de-duplicated away.
Fix this by keeping two maps, one mapping gc pointers to their
de-duplicated values, and one mapping a de-duplicated value to the slot
it is spilled in.
llvm-svn: 264320
When multiple DWP files are merged together and duplicate DWO IDs are
found it's currently difficult to give an actionable error message - the
DW_AT_name of the CU could be provided, but might be identical (if the
same source file is built into two different configurations), which
doesn't help the user identify the problem.
When no intermediate DWP files are generated, the path to the two DWO
files could be provided - but is lost once the DWOs are merged into a
DWP.
So, include the name of the DWO (dwo_name) in the split file so that
collissions involving a source CU from a DWP can be better diagnosed.
(improvements to llvm-dwp using this to come shortly)
llvm-svn: 264316
isDependenceDistanceOfOne asserts that the store and the load access
through the same type. This function is also used by
removeDependencesFromMultipleStores so we need to make sure we filter
out mismatching types before reaching this point.
Now we do this when the initial candidates are gathered.
This is a refinement of the fix made in r262267.
Fixes PR27048.
llvm-svn: 264313
The `MipsMCInstrAnalysis` class overrides the `evaluateBranch` method
and calculates target addresses for branch and calls instructions.
That allows llvm-objdump to print functions' names in branch instructions
in the disassemble mode.
Differential Revision: http://reviews.llvm.org/D18209
llvm-svn: 264309
Simplify ValueEnumerator and WriteModuleMetadata by shifting the logic
for the METADATA_GENERIC_DEBUG abbreviation into WriteGenericDINode.
(This is just like r264302, but for GenericDINode.)
The only change is that the abbreviation is emitted later in the
bitcode, just before the first `GenericDINode` record. This shouldn't
be observable though.
llvm-svn: 264303
Simplify ValueEnumerator and WriteModuleMetadata by shifting the logic
for the METADATA_LOCATION abbreviation into WriteDILocation.
The only change is that the abbreviation is emitted later in the
bitcode, just before the first `DILocation` record. This shouldn't be
observable though.
llvm-svn: 264302
Split writeNamedMetadata out of WriteModuleMetadata to write named
metadata, and createNamedMetadataAbbrev for the abbreviation.
There should be no effective functionality change, although the layout
of the bitcode will change. Previously, the abbreviation was emitted at
the top of the block, but now it is delayed until immediately before the
named metadata records are emitted.
llvm-svn: 264301
KTEST instruction may be used instead of TEST in this case:
%int_sel3 = bitcast <8 x i1> %sel3 to i8
%res = icmp eq i8 %int_sel3, zeroinitializer
br i1 %res, label %L2, label %L1
Differential Revision: http://reviews.llvm.org/D18444
llvm-svn: 264298
If the operation's type has been promoted during type legalization, we
need to account for the fact that the high bits of the comparison
operand are likely unspecified.
The LHS is usually zero-extended, but MIPS sign extends it, so we have
to be slightly careful.
Patch by Simon Dardis.
llvm-svn: 264296
After comdat processing, the symbols still go through regular symbol
resolution.
We were not doing it for linkonce symbols since they are lazy linked.
This fixes pr27044.
llvm-svn: 264288
Summary:
Some target lowerings of FP_TO_FP16, for instance ARM's vcvtb.f16.f32
instruction, do not guarantee that the top 16 bits are zeroed out.
Remove the unsafe AssertZext and add tests to exercise this.
Reviewers: jmolloy, sbaranga, kristof.beyls, aadg
Subscribers: llvm-commits, srhines, aemerson
Differential Revision: http://reviews.llvm.org/D18426
llvm-svn: 264285
This patch corresponds to review:
http://reviews.llvm.org/D17711
It disables direct moves on these operations in 32-bit mode since the patterns
assume 64-bit registers. The final patch is slightly different from the
Phabricator review as the bitcast operations needed to be disabled in 32-bit
mode as well. This fixes PR26617.
llvm-svn: 264282
This patch begins adding support for lowering to the XOP VPPERM instruction - adding the X86ISD::VPPERM opcode.
Differential Revision: http://reviews.llvm.org/D18189
llvm-svn: 264260
Summary:
In particular, make the cnMIPS predicates much more obvious and prefer
def ... : ... {
let Foo = bar;
}
over:
let Foo = bar in
def ... : ...;
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18354
llvm-svn: 264258
We used to only allow SCEVAddRecExpr for pointer expressions in order to
be able to compute the bounds. However this is also trivially possible
for loop-invariant addresses (scUnknown) since then the bounds are the
address itself.
Interestingly, we used allow this for the special case when the
loop-invariant address happens to also be an SCEVAddRecExpr (in an outer
loop).
There are a couple more loops that are vectorized in SPEC after this.
My guess is that the main reason we don't see more because for example a
loop-invariant load is vectorized into a splat vector with several
vector-inserts. This is likely to make the vectorization unprofitable.
I.e. we don't notice that a later LICM will move all of this out of the
loop so the cost estimate should really be 0.
llvm-svn: 264243
We need the "return address" of a noreturn call to be within the
bounds of the calling function; TrapUnreachable turns 'unreachable'
into a 'ud2' instruction, which has that desired effect.
Differential Revision: http://reviews.llvm.org/D18414
llvm-svn: 264224
If not for lazy linking of linkonce GVs, comdats are just a
preprocessing before symbol resolution.
Lazy linking complicates it since when we pick a visible member of
comdat, we have to make sure the rest of it passes symbol resolution
too.
llvm-svn: 264223
This is a temporary crutch to enable code that currently uses std::error_code
to be incrementally moved over to Error. Requiring all Error instances be
convertible enables clients to call errorToErrorCode on any error (not just
ECErrors created by conversion *from* an error_code).
This patch also moves code for Error from ErrorHandling.cpp into a new
Error.cpp file.
llvm-svn: 264221
Strengthen tests of storing frame indices.
Right now this just creates irrelevant scheduling changes.
We don't want to have multiple frame index operands
on an instruction. There seem to be various assumptions
that at least the same frame index will not appear twice
in the LocalStackSlotAllocation pass.
There's no reason to have this happen, and it just
makes it easy to introduce bugs where the immediate
offset is appplied to the storing instruction when it should
really be applied to the value being stored as a separate
add.
This might not be sufficient. It might still be problematic
to have an add fi, fi situation, but that's even less unlikely
to happen in real code.
llvm-svn: 264200
Currently, AnalyzeBranch() fails non-equality comparison between floating points
on X86 (see https://llvm.org/bugs/show_bug.cgi?id=23875). This is because this
function can modify the branch by reversing the conditional jump and removing
unconditional jump if there is a proper fall-through. However, in the case of
non-equality comparison between floating points, this can turn the branch
"unanalyzable". Consider the following case:
jne.BB1
jp.BB1
jmp.BB2
.BB1:
...
.BB2:
...
AnalyzeBranch() will reverse "jp .BB1" to "jnp .BB2" and then "jmp .BB2" will be
removed:
jne.BB1
jnp.BB2
.BB1:
...
.BB2:
...
However, AnalyzeBranch() cannot analyze this branch anymore as there are two
conditional jumps with different targets. This may disable some optimizations
like block-placement: in this case the fall-through behavior is enforced even if
the fall-through block is very cold, which is suboptimal.
Actually this optimization is also done in block-placement pass, which means we
can remove this optimization from AnalyzeBranch(). However, currently
X86::COND_NE_OR_P and X86::COND_NP_OR_E are not reversible: there is no defined
negation conditions for them.
In order to reverse them, this patch defines two new CondCode X86::COND_E_AND_NP
and X86::COND_P_AND_NE. It also defines how to synthesize instructions for them.
Here only the second conditional jump is reversed. This is valid as we only need
them to do this "unconditional jump removal" optimization.
Differential Revision: http://reviews.llvm.org/D11393
llvm-svn: 264199
If a comdat is dropped, all symbols in it are dropped.
If a comdat is kept, the symbols survive to pass regular symbol
resolution.
With this patch we do that for all global symbols.
The added test is a copy of test/tools/gold/X86/comdat.ll that we now
pass.
llvm-svn: 264192
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
This should be hoisted further up so it can be used in DAGCombiner and other backends,
but I'm limiting the scope in the interest of patch minimalism.
It's not quite NFC because some of the replaced code was using an 'if' check rather
than a 'while' loop, so those cases would only look through a single bitcast.
llvm-svn: 264186
There are a few bugs in the walker that this patch addresses.
Primarily:
- Caching can break when we have multiple BBs without phis
- We weren't optimizing some phis properly
- Because of how the DFS iterator works, there were times where we
wouldn't cache any results of our DFS
I left the test cases with FIXMEs in, because I'm not sure how much
effort it will take to get those to work (read: We'll probably
ultimately have to end up redoing the walker, or we'll have to come up
with some creative caching tricks), and more test coverage = better.
Differential Revision: http://reviews.llvm.org/D18065
llvm-svn: 264180
Summary:
This changes the conversion functions from SCEV * to SCEVAddRecExpr from
ScalarEvolution and PredicatedScalarEvolution to return a SCEVAddRecExpr*
instead of a SCEV* (which removes the need of most clients to do a
dyn_cast right after calling these functions).
We also don't add new predicates if the transformation was not successful.
This is not entirely a NFC (as it can theoretically remove some predicates
from LAA when we have an unknown dependece), but I couldn't find an obvious
regression test for it.
Reviewers: sanjoy
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18368
llvm-svn: 264161
If we can't handle a relocation type, report it as an error in the source,
rather than asserting. I've added a more descriptive message and a test for the
only cases of this that I've been able to trigger.
Differential Revision: http://reviews.llvm.org/D18388
llvm-svn: 264156
Now that StatepointLoweringInfo represents base pointers, derived
pointers and gc relocates as SmallVectors and not ArrayRefs, we no
longer need to allocate "backing storage" on stack in LowerStatepoint.
So elide the backing storage, and inline the trivial body of
getIncomingStatepointGCValues.
llvm-svn: 264128
We can statically decide whether or not a register pressure set is for
SGPRs or VGPRs, so we don't need to re-compute this information in
SIRegisterInfo::getRegPressureSetLimit().
Differential Revision: http://reviews.llvm.org/D14805
llvm-svn: 264126
MCContext shouldn't be accessing the filesystem - that's a gross
layering violation and makes it awkward to use as a library or in a
daemon where it may not even be allowed filesystem access.
The CWD lookup here is normally redundant anyway, since the calling
context either also looks up the CWD or sets this to something more
specific. Here, we fix up the one caller that doesn't already set up a
debug compilation dir and make it clear that the responsibility for
such set up is in the users of MCContext.
llvm-svn: 264109
A really unfortunate design of llvm-link and related libraries is that
they operate one module at a time.
This means they can copy a GV to the destination module that should not
be there in the final result because a later bitcode file takes
precedence.
We already handled cases like a strong GV replacing a weak for example.
One case that is not currently handled is a comdat replacing another.
This doesn't happen in ELF, but with COFF largest selection kind it is
possible.
In "llvm-link a.ll b.ll" if the selected comdat was from a.ll,
everything will work and we will not copy the comdat from b.ll.
But if we run "llvm-link b.ll a.ll", we fail to delete the already
copied comdat from b.ll. This patch fixes that.
llvm-svn: 264103
CGP modifies the domtree in some cases, so saying that it preserves the
domtree is a lie. We'll be able to selectively preserve it with the new
pass manager.
Differential Revision: http://reviews.llvm.org/D16893
llvm-svn: 264099
We were just completely ignoring the types when determining whether we could
safely emit a libcall as a tail call. This is clearly wrong.
Theoretically, we could dig deeper looking for incidental matches (much like
the generic code in Analysis.cpp does), but it's probably not worth it for the
few libcalls that exist.
llvm-svn: 264084
When you have multiple LCSSA (single-operand) PHIs that are converted
into two-operand PHIs due to versioning, only assert that the PHI
currently being converted has a single operand. I.e. we don't want to
check PHIs that were converted earlier in the loop.
Fixes PR27023.
Thanks to Karl-Johan Karlsson for the minimized testcase!
llvm-svn: 264081
Improve vector extension of vectors on hardware without dedicated VSEXT/VZEXT instructions.
We already convert these to SIGN_EXTEND_VECTOR_INREG/ZERO_EXTEND_VECTOR_INREG but can further improve this by using the legalizer instead of prematurely splitting into legal vectors in the combine as this only properly helps for lowering to VSEXT/VZEXT.
Removes a lot of unnecessary any_extend + mask pattern - (Fix for PR25718).
Reapplied with a fix for PR26953 (missing vector widening legalization).
Differential Revision: http://reviews.llvm.org/D17932
llvm-svn: 264062
Summary:
Also renamed li_simm7 to li16_imm since it's not a simm7 and has an unusual
encoding (it's a uimm7 except that 0x7f represents -1).
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18145
llvm-svn: 264056
Summary:
We can't check the error message for this one because there's another lw/sw
available that covers a larger range. We therefore check the transition
between the two sizes.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18144
llvm-svn: 264054
It's a bug fix.
For rerolled loops SE trip count remains unchanged. It leads to incorrect work of the next passes.
My patch just resets SE info for rerolled loop forcing SE to re-evaluate it next time it requested.
I also added a verifier call in the exisitng test to be sure no invalid SE data remain. Without my fix this test would fail with -verify-scev.
Differential Revision: http://reviews.llvm.org/D18316
llvm-svn: 264051
Adding support for section names with special characters in them (e.g. "/").
GCC successfully compiles such section names.
This also fixes PR24520.
Differential Revision: http://reviews.llvm.org/D15678
llvm-svn: 264038
Summary:
After this change, deopt operand bundles can be lowered directly by
SelectionDAG into STATEPOINT instructions (which are then lowered to a
call or sequence of nop, with an associated __llvm_stackmaps entry0.
This obviates the need to round-trip deoptimization state through
gc.statepoint via RewriteStatepointsForGC.
Reviewers: reames, atrick, majnemer, JosephTremoulet, pgavlin
Subscribers: sanjoy, mcrosier, majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D18257
llvm-svn: 264015
Summary:
Without tree pruning clang has 2,667,552 points.
Wiht only dominators pruning: 1,515,586.
With both dominators & predominators pruning: 1,340,534.
Resubmit of r262103.
Differential Revision: http://reviews.llvm.org/D18341
llvm-svn: 264003
As noted in PR18355, this patch makes it clear that all cases with undef operands have been handled before further constant folding is attempted.
Differential Revision: http://reviews.llvm.org/D18305
llvm-svn: 263994
If we have a BB with only MemoryDefs, live-in calculations will ignore
it. This means we get results like this:
define void @foo(i8* %p) {
; 1 = MemoryDef(liveOnEntry)
store i8 0, i8* %p
br i1 undef, label %if.then, label %if.end
if.then:
; 2 = MemoryDef(1)
store i8 1, i8* %p
br label %if.end
if.end:
; 3 = MemoryDef(1)
store i8 2, i8* %p
ret void
}
...When there should be a MemoryPhi in the `if.end` BB.
This patch fixes that behavior.
llvm-svn: 263991
Summary:
Whole quad mode is already enabled for pixel shaders that compute
derivatives, but it must be suspended for instructions that cause a
shader to have side effects (i.e. stores and atomics).
This pass addresses the issue by storing the real (initial) live mask
in a register, masking EXEC before instructions that require exact
execution and (re-)enabling WQM where required.
This pass is run before register coalescing so that we can use
machine SSA for analysis.
The changes in this patch expose a problem with the second machine
scheduling pass: target independent instructions like COPY implicitly
use EXEC when they operate on VGPRs, but this fact is not encoded in
the MIR. This can lead to miscompilation because instructions are
moved past changes to EXEC.
This patch fixes the problem by adding use-implicit operands to
target independent instructions. Some general codegen passes are
relaxed to work with such implicit use operands.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: MatzeB, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18162
llvm-svn: 263982
Summary:
When control flow is implemented using the exec mask, the compiler will
insert branch instructions to skip over the masked section when exec is
zero if the section contains more than a certain number of instructions.
The previous code would only count instructions in successor blocks,
and this patch modifies the code to start counting instructions in all
blocks between the start and end of the branch.
Reviewers: nhaehnle, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18282
llvm-svn: 263969
This introduces a custom lowering for ISD::SETCCE (introduced in r253572)
that allows us to emit a short code sequence for 64-bit compares.
Before:
push {r7, lr}
cmp r0, r2
mov.w r0, #0
mov.w r12, #0
it hs
movhs r0, #1
cmp r1, r3
it ge
movge.w r12, #1
it eq
moveq r12, r0
cmp.w r12, #0
bne .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
After:
push {r7, lr}
subs r0, r0, r2
sbcs.w r0, r1, r3
bge .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
Saves around 80KB in Chromium's libchrome.so.
Some notes on this patch:
- I don't much like the ARMISD::BRCOND and ARMISD::CMOV combines I
introduced (nothing else needs them). However, they are necessary in
order to avoid poor codegen, and they seem similar to existing combines
in other backends (e.g. X86 combines (brcond (cmp (setcc Compare))) to
(brcond Compare)).
- No support for Thumb-1. This is in principle possible, but we'd need
to implement ARMISD::SUBE for Thumb-1.
Differential Revision: http://reviews.llvm.org/D15256
llvm-svn: 263962
Summary:
replaceCongruentIVs can break LCSSA when trying to replace IV increments
since it tries to replace all uses of a phi node with another phi node
while both of the phi nodes are not necessarily in the processed loop.
This will cause an assert in IndVars.
To fix this, we add a check to make sure that the replacement maintains
LCSSA.
Reviewers: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18266
llvm-svn: 263941
Summary:
extract_vector_elt can cause an implicit any_ext if the types don't
match. When processing the following pattern:
(and (extract_vector_elt (load ([non_ext|any_ext|zero_ext] V))), c)
DAGCombine was ignoring the possible extend, and sometimes removing
the AND even though it was required to maintain some of the bits
in the result to 0, resulting in a miscompile.
This change fixes the issue by limiting the transformation only to
cases where the extract_vector_elt doesn't perform the implicit
extend.
Reviewers: t.p.northover, jmolloy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18247
llvm-svn: 263935
Summary:
The old address space inference pass (NVPTXFavorNonGenericAddrSpaces) is unable
to convert the address space of a pointer induction variable. This patch adds a
new pass called NVPTXInferAddressSpaces that overcomes that limitation using a
fixed-point data-flow analysis (see the file header comments for details).
The new pass is experimental and not enabled by default. Users can turn
it on by setting the -nvptx-use-infer-addrspace flag of llc.
Reviewers: jholewinski, tra, jlebar
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D17965
llvm-svn: 263916
Improve computeZeroableShuffleElements to be able to peek through bitcasts to extract zero/undef values from BUILD_VECTOR nodes of different element sizes to the shuffle mask.
Differential Revision: http://reviews.llvm.org/D14261
llvm-svn: 263906
Summary: Also expose getters and setters in the C API, so that the change can be tested.
Reviewers: nhaehnle, axw, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18260
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
llvm-svn: 263886
The sinpi/cospi can be replaced with sincospi to remove unnecessary
computations. However, we need to make sure that the calls are within
the same function!
This fixes PR26993.
llvm-svn: 263875
MDString are uniqued in the Context on creation, hashing the
pointer is less expensive than hashing the String itself.
Reviewers: dexonsmith
Differential Revision: http://reviews.llvm.org/D16560
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263867
Summary:
This patch changes the computation of the hash key for DISubprogram to
be computed on a small subset of the fields. The hash is computed a
lot faster, but there might be more collision in the table.
However by carefully selecting the fields, colisions should be rare.
Using `opt` to load the IR for FastISelEmitter.cpp.o, with this patch:
- DISubprogram::getImpl() goes from 28ms to 15ms.
- DICompositeType::getImpl() goes from 6ms to 2ms
- DIDerivedType::getImpl() goes from 18 to 12ms
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16571
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263866
Summary:
ThinLTO is relying on linkInModule to import selected function.
However a lot of "magic" was hidden in linkInModule and the IRMover,
who would rename and promote global variables on the fly.
This is moving to an approach where the steps are decoupled and the
client is reponsible to specify the list of globals to import.
As a consequence some test are changed because they were relying on
the previous behavior which was importing the definition of *every*
single global without control on the client side.
Now the burden is on the client to decide if a global has to be imported
or not.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18122
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263863
We need to be careful on which registers can be explicitly handled
via copies. Prologue, Epilogue use physical registers and if one belongs
to the set of CSRsViaCopy, it will no longer be CSRed, since PEI overwrites
it after the explicit copies.
llvm-svn: 263857
Avoid modifying other modules in `AArch64PromoteConstant` when the
constant is `ConstantData` (a horrible accident, I'm sure, caught by an
experimental follow-up to r261464).
Previously, this walked through all the users of a constant, but that
reaches into other modules when the constant doesn't depend transitively
on a `GlobalValue`! Since we're walking instructions anyway, just
modify the instructions we actually see.
As a drive-by, instead of storing `Use` and getting the instructions
again via `Use::getUser()` (which is not a constantant time lookup),
store `std::pair<Instruction, unsigned>`. Besides being cheaper, this
makes it easier to drop use-lists form `ConstantData` in the future.
(I threw this in because I was touching all the code anyway.)
Because the patch completely changes the traversal logic, it looks
like a rewrite of the pass, but the core logic is all the same (or
should be, minus the out-of-module changes). In other words, there
should be NFC as long as the LLVMContext only has a single Module.
I didn't think of a good way to test this, but I hope to submit a patch
eventually that makes walking these use-lists illegal/impossible.
llvm-svn: 263853
The loop on IVOperand's incoming values assumes IVOperand to be an
induction variable on the loop over which `S Pred X` is invariant;
otherwise loop invariant incoming values to IVOperand are not guaranteed
to dominate the comparision.
This fixes PR26973.
llvm-svn: 263827
This patch adds unscaled loads and sign-extend loads to the TII
getMemOpBaseRegImmOfs API, which is used to control clustering in the MI
scheduler. This is done to create more opportunities for load pairing. I've
also added the scaled LDRSWui instruction, which was missing from the scaled
instructions. Finally, I've added support in shouldClusterLoads for clustering
adjacent sext and zext loads that too can be paired by the load/store optimizer.
Differential Revision: http://reviews.llvm.org/D18048
llvm-svn: 263819
Summary:
These dependencies would be used in the future to reduce the number
of instrumented blocks(http://reviews.llvm.org/rL262103)
This is submitted as a separate CL because of previous problems with
ARM.
Subscribers: aemerson
Differential Revision: http://reviews.llvm.org/D18227
llvm-svn: 263797
Summary:
Allow the selection of BUFFER_LOAD_FORMAT_x and _XY. Do this now before
the frontend patches land in Mesa. Eventually, we may want to automatically
reduce the size of loads at the LLVM IR level, which requires such overloads,
and in some cases Mesa can generate them directly.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18255
llvm-svn: 263792
Summary:
These intrinsics expose the BUFFER_ATOMIC_* instructions and will be used
by Mesa to implement atomics with buffer semantics. The intrinsic interface
matches that of buffer.load.format and buffer.store.format, except that the
GLC bit is not exposed (it is automatically deduced based on whether the
return value is used).
The change of hasSideEffects is required for TableGen to accept the pattern
that matches the intrinsic.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, rivanvx, llvm-commits
Differential Revision: http://reviews.llvm.org/D18151
llvm-svn: 263791
Summary:
We cannot easily deduce that an offset is in an SGPR, but the Mesa frontend
cannot easily make use of an explicit soffset parameter either. Furthermore,
it is likely that in the future, LLVM will be in a better position than the
frontend to choose an SGPR offset if possible.
Since there aren't any frontend uses of these intrinsics in upstream
repositories yet, I would like to take this opportunity to change the
intrinsic signatures to a single offset parameter, which is then selected
to immediate offsets or voffsets using a ComplexPattern.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18218
llvm-svn: 263790
Summary:
It can hurt performance to prefetch ahead too much. Be conservative for
now and don't prefetch ahead more than 3 iterations on Cyclone.
Reviewers: hfinkel
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17949
llvm-svn: 263772
Summary:
And use this TTI for Cyclone. As it was explained in the original RFC
(http://thread.gmane.org/gmane.comp.compilers.llvm.devel/92758), the HW
prefetcher work up to 2KB strides.
I am also adding tests for this and the previous change (D17943):
* Cyclone prefetching accesses with a large stride
* Cyclone not prefetching accesses with a small stride
* Generic Aarch64 subtarget not prefetching either
Reviewers: hfinkel
Subscribers: aemerson, rengolin, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17945
llvm-svn: 263771
Summary:
This wires up the pass for Cyclone but keeps it off for now because we
need a few more TTIs.
The getPrefetchMinStride value is not very well tuned right now but it
works well with CFP2006/433.milc which motivated this.
Tests will be added as part of the upcoming large-stride prefetching
patch.
Reviewers: t.p.northover
Subscribers: llvm-commits, aemerson, hfinkel, rengolin
Differential Revision: http://reviews.llvm.org/D17943
llvm-svn: 263770
A virtual index of -1u indicates that the subprogram's virtual index is
unrepresentable (for example, when using the relative vtable ABI), so do
not emit a DW_AT_vtable_elem_location attribute for it.
Differential Revision: http://reviews.llvm.org/D18236
llvm-svn: 263765
For fcmp, major concern about the following 6 cases is NaN result. The
comparison result consists of 4 bits, indicating lt, eq, gt and un (unordered),
only one of which will be set. The result is generated by fcmpu
instruction. However, bc instruction only inspects one of the first 3
bits, so when un is set, bc instruction may jump to to an undesired
place.
More specifically, if we expect an unordered comparison and un is set, we
expect to always go to true branch; in such case UEQ, UGT and ULT still
give false, which are undesired; but UNE, UGE, ULE happen to give true,
since they are tested by inspecting !eq, !lt, !gt, respectively.
Similarly, for ordered comparison, when un is set, we always expect the
result to be false. In such case OGT, OLT and OEQ is good, since they are
actually testing GT, LT, and EQ respectively, which are false. OGE, OLE
and ONE are tested through !lt, !gt and !eq, and these are true.
llvm-svn: 263753
Summary:
Use the new LoopVersioning facility (D16712) to add noalias metadata in
the vector loop if we versioned with memchecks. This can enable some
optimization opportunities further down the pipeline (see the included
test or the benchmark improvement quoted in D16712).
The test also covers the bug I had in the initial version in D16712.
The vectorizer did not previously use LoopVersioning. The reason is
that the vectorizer performs its transformations in single shot. It
creates an empty single-block vector loop that it then populates with
the widened, if-converted instructions. Thus creating an intermediate
versioned scalar loop seems wasteful.
So this patch (rather than bringing in LoopVersioning fully) adds a
special interface to LoopVersioning to allow the vectorizer to add
no-alias annotation while still performing its own versioning.
As the vectorizer propagates metadata from the instructions in the
original loop to the vector instructions we also check the pointer in
the original instruction and see if LoopVersioning can add no-alias
metadata based on the issued memchecks.
Reviewers: hfinkel, nadav, mzolotukhin
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17191
llvm-svn: 263744
Summary:
If we decide to version a loop to benefit a transformation, it makes
sense to record the now non-aliasing accesses in the newly versioned
loop. This allows non-aliasing information to be used by subsequent
passes.
One example is 456.hmmer in SPECint2006 where after loop distribution,
we vectorize one of the newly distributed loops. To vectorize we
version this loop to fully disambiguate may-aliasing accesses. If we
add the noalias markers, we can use the same information in a later DSE
pass to eliminate some dead stores which amounts to ~25% of the
instructions of this hot memory-pipeline-bound loop. The overall
performance improves by 18% on our ARM64.
The scoped noalias annotation is added in LoopVersioning. The patch
then enables this for loop distribution. A follow-on patch will enable
it for the vectorizer. Eventually this should be run by default when
versioning the loop but first I'd like to get some feedback whether my
understanding and application of scoped noalias metadata is correct.
Essentially my approach was to have a separate alias domain for each
versioning of the loop. For example, if we first version in loop
distribution and then in vectorization of the distributed loops, we have
a different set of memchecks for each versioning. By keeping the scopes
in different domains they can conveniently be defined independently
since different alias domains don't affect each other.
As written, I also have a separate domain for each loop. This is not
necessary and we could save some metadata here by using the same domain
across the different loops. I don't think it's a big deal either way.
Probably the best is to review the tests first to see if I mapped this
problem correctly to scoped noalias markers. I have plenty of comments
in the tests.
Note that the interface is prepared for the vectorizer which needs the
annotateInstWithNoAlias API. The vectorizer does not use LoopVersioning
so we need a way to pass in the versioned instructions. This is also
why the maps have to become part of the object state.
Also currently, we only have an AA-aware DSE after the vectorizer if we
also run the LTO pipeline. Depending how widely this triggers we may
want to schedule a DSE toward the end of the regular pass pipeline.
Reviewers: hfinkel, nadav, ashutosh.nema
Subscribers: mssimpso, aemerson, llvm-commits, mcrosier
Differential Revision: http://reviews.llvm.org/D16712
llvm-svn: 263743
I hit a crash in the bitcode reader on some corrupt input where an
MDString had somehow been attached to an instruction instead of an
MDNode. This input is pretty bogus, but we shouldn't be crashing on bad
input here.
This change adds error handling in all of the places where we
currently have unchecked casts from Metadata to MDNode, which means
we'll error out instead of crashing for that sort of input.
Unfortunately, I don't have tests. Hitting this requires flipping bits
in the input bitcode, and committing corrupt binary files to catch
these cases is a bit too opaque and unmaintainable.
llvm-svn: 263742
This patch prevents CTR loops optimization when using soft float operations
inside loop body. Soft float operations use function calls, but function
calls are not allowed inside CTR optimized loops.
Patch by Aleksandar Beserminji.
Differential Revision: http://reviews.llvm.org/D17600
llvm-svn: 263727
Summary:
MRI::eliminateFrameIndex can emit several instructions to do address
calculations; these can usually be stackified. Because instructions with
FI operands can have subsequent operands which may be expression trees,
find the top of the leftmost tree and insert the code before it, to keep
the LIFO property.
Also use stackified registers when writing back the SP value to memory
in the epilog; it's unnecessary because SP will not be used after the
epilog, and it results in better code.
Differential Revision: http://reviews.llvm.org/D18234
llvm-svn: 263725
Symmary:
ds_permute/ds_bpermute do not read memory so s_waitcnt is not needed.
Reviewers
arsenm, tstellarAMD
Subscribers
llvm-commits, arsenm
Differential Revision:
http://reviews.llvm.org/D18197
llvm-svn: 263720
Summary:
As explained by the comment, threads will typically see different values
returned by atomic instructions even if the arguments are equal.
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18156
llvm-svn: 263719
We were being too aggressive in trying to combine a shuffle into a blend-with-zero pattern, often resulting in a endless loop of contrasting combines
This patch stops the combine if we already have a blend in place (means we miss some domain corrections)
llvm-svn: 263717
This is similar to D18133 where we allowed profile weights on select instructions.
This extends that change to also allow the 'unpredictable' attribute of branches to apply to selects.
A test to check that 'unpredictable' metadata is preserved when cloning instructions was checked in at:
http://reviews.llvm.org/rL263648
Differential Revision: http://reviews.llvm.org/D18220
llvm-svn: 263716
The two changes together weakened the test and caused a regression with division
handling in MSVC mode. They were applied to avoid an assertion being triggered
in the block frequency analysis. However, the underlying problem was simply
being masked rather than solved properly. Address the actual underlying problem
and revert the changes. Rather than analyze the cause of the assertion, the
division failure was assumed to be an overflow.
The underlying issue was a subtle bug in the BB construction in the emission of
the div-by-zero check (WIN__DBZCHK). We did not construct the proper successor
information in the basic blocks, nor did we update the PHIs associated with the
basic block when we split them. This would result in assertions being triggered
in the block frequency analysis pass.
Although the original tests are being removed, the tests themselves performed
very little in terms of validation but merely tested that we did not assert when
generating code. Update this with new tests that actually ensure that we do not
regress on the code generation.
llvm-svn: 263714
That allows, for example, to print hex-formatted immediates using
llvm-objdump --print-imm-hex command line option.
Differential Revision: http://reviews.llvm.org/D18195
llvm-svn: 263704
Summary:
This should eliminate all occurrences of this within LLVMMipsAsmParser.
This patch is in response to http://reviews.llvm.org/D17983. I was unable
to reproduce the warnings on my machine so please advise if this fixes the
warnings.
Reviewers: ariccio, vkalintiris, dsanders
Subscribers: dblaikie, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18087
llvm-svn: 263703
This splits out the logic that maps the `"statepoint-id"` attribute into
the actual statepoint ID, and the `"statepoint-num-patch-bytes"`
attribute into the number of patchable bytes the statpeoint is lowered
into. The new home of this logic is in IR/Statepoint.cpp, and this
refactoring will support similar functionality when lowering calls with
deopt operand bundles in the future.
llvm-svn: 263685
Summary: If TBAA is on an intrinsic and it gets upgraded and drops the TBAA we hit an odd assert. We should just upgrade the TBAA first because it doesn't have side-effects.
Reviewers: reames, apilipenko, manmanren
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18229
llvm-svn: 263673
Summary:
This is a step towards implementing "direct" lowering of calls and
invokes with deopt operand bundles into STATEPOINT nodes (as opposed to
having them mandatorily pass through RewriteStatepointsForGC, which is
the case today).
This change extracts out a `SelectionDAGBuilder::LowerAsStatepoint`
helper function that is able to lower a "statepoint like thing", and
uses it to lower `gc.statepoint` calls. This is an NFC now, but in a
later change we will use `LowerAsStatepoint` to directly lower calls and
invokes with operand bundles without going through an intermediate
`gc.statepoint` IR representation.
FYI: I expect `SelectionDAGBuilder::StatepointInfo` will evolve as I add
support for lowering non gc.statepoints, right now it is fairly tightly
coupled with an IR level `gc.statepoint`.
Reviewers: reames, pgavlin, JosephTremoulet
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18106
llvm-svn: 263671
- Rename getATOMIC to getSYNC, as llvm will soon be able to emit both
'__sync' libcalls and '__atomic' libcalls, and this function is for
the '__sync' ones.
- getInsertFencesForAtomic() has been replaced with
shouldInsertFencesForAtomic(Instruction), so that the decision can be
made per-instruction. This functionality will be used soon.
- emitLeadingFence/emitTrailingFence are no longer called if
shouldInsertFencesForAtomic returns false, and thus don't need to
check the condition themselves.
llvm-svn: 263665
SelectionDAGBuilder::populateCallLoweringInfo is now used instead of
SelectionDAGBuilder::lowerCallOperands. The populateCallLoweringInfo
interface is more composable in face of design changes like
http://reviews.llvm.org/D18106
llvm-svn: 263663
The swift frontend needs to be able to look up PGO function name
variables based on the original raw function name. That's because it's
not possible to create PGO function name variables while emitting swift
IR. Instead, we have to create the name variables while lowering swift
IR to llvm IR, at which point we fix up all calls to the increment
intrinsic to point to the right name variable.
llvm-svn: 263662
Summary:
Uniform loops where the branch leaving the loop is predicated on VCCNZ
must be skipped if EXEC = 0, otherwise they will be infinite.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18137
llvm-svn: 263658
Summary:
Fix LSRInstance::HoistInsertPosition() to check the original insert
position block first for a canonical insertion point that is dominated
by all inputs. This leads to SCEV being able to reuse more instructions
since it currently tracks the instructions it creates for reuse by
keeping a table of <Value, insert point> pairs.
Reviewers: atrick
Subscribers: mcrosier, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18001
llvm-svn: 263644
And emit an error if it fails.
This prevents illegal instructions from getting sent to the GPU, which
would potentially result in a hang.
This is a candidate for the stable branch(es).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
llvm-svn: 263627
This patch introduces the Error classs for lightweight, structured,
recoverable error handling. It includes utilities for creating, manipulating
and handling errors. The scheme is similar to exceptions, in that errors are
described with user-defined types. Unlike exceptions however, errors are
represented as ordinary return types in the API (similar to the way
std::error_code is used).
For usage notes see the LLVM programmer's manual, and the Error.h header.
Usage examples can be found in unittests/Support/ErrorTest.cpp.
Many thanks to David Blaikie, Mehdi Amini, Kevin Enderby and others on the
llvm-dev and llvm-commits lists for lots of discussion and review.
llvm-svn: 263609
The latent bug that LLE exposed in the LoopVectorizer was resolved
(PR26952).
The pass can be disabled with -mllvm -enable-loop-load-elim=0
llvm-svn: 263595
There is something strange going on with debug info (.eh_frame_hdr)
disappearing when msan.module_ctor are placed in comdat sections.
Moving this functionality under flag, disabled by default.
llvm-svn: 263579
Record all variable defs with a summary record to aid in building a
complete reference graph and locating constant variable defs to import.
llvm-svn: 263576
Summary: This change adds a PACKAGE_VENDOR variable. When set it makes the version output more closely resemble the clang version output.
Reviewers: aprantl, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18159
llvm-svn: 263566
This was a latent bug that got exposed by the change to add LoopSimplify
as a dependence to LoopLoadElimination. Since LoopInfo was corrupted
after LV, LoopSimplify mis-compiled nbench in the test-suite (more
details in the PR).
The problem was that when we create the blocks for predicated stores we
didn't add those to any loops.
The original testcase for store predication provides coverage for this
assuming we verify LI on the way out of LV.
Fixes PR26952.
llvm-svn: 263565
Summary:
Static LDS size is saved in MachineFunctionInfo::LDSSize,
We define a pseudo instruction with usesCustomInserter bit set. Then, in EmitInstrWithCustomInserter,
we replace this pseudo instruction with a mov of MachineFunctionInfo::LDSSize.
Reviewers:
arsenm
tstellarAMD
Subscribers
llvm-commits, arsenm
Differential Revision:
http://reviews.llvm.org/D18064
llvm-svn: 263563
Since the static getGlobalIdentifier and getGUID methods are now called
for global values other than functions, reflect that by moving these
methods to the GlobalValue class.
llvm-svn: 263524
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
Instead of running an explicit loop over `gc.relocate` calls hanging off
of a `gc.statepoint`, assert the validity of the type of the value being
relocated in `visitRelocate`.
llvm-svn: 263516
`MCSymbolRefExpr` variant kind for TLSCALL is prefixed with
_ARM_ since this is how it was originally implemented.
The X86_64 version is exactly the same so there's no reason
to create a new variant, we can just rename the existing
one to be machine-independent.
This generalization is the first step to implement support
for GNU2 TLS dialect in MC.
Differential Revision: http://reviews.llvm.org/D18160
llvm-svn: 263515
(Resubmitting after fixing missing file issue)
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263513
Summary:
Specifically, when we perform runtime loop unrolling of a loop that
contains a convergent op, we can only unroll k times, where k divides
the loop trip multiple.
Without this change, we'll happily unroll e.g. the following loop
for (int i = 0; i < N; ++i) {
if (i == 0) convergent_op();
foo();
}
into
int i = 0;
if (N % 2 == 1) {
convergent_op();
foo();
++i;
}
for (; i < N - 1; i += 2) {
if (i == 0) convergent_op();
foo();
foo();
}.
This is unsafe, because we've just added a control-flow dependency to
the convergent op in the prelude.
In general, runtime unrolling loops that contain convergent ops is safe
only if we don't have emit a prelude, which occurs when the unroll count
divides the trip multiple.
Reviewers: resistor
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17526
llvm-svn: 263509
Summary: This now try to reorder instructions in order to help create the optimizable pattern.
Reviewers: craig.topper, spatel, dexonsmith, Prazek, chandlerc, joker.eph, majnemer
Differential Revision: http://reviews.llvm.org/D16523
llvm-svn: 263503
Summary:
This form was replaced by a form taking an instruction instead of opcode and
return type in r258391. After committing this change (and some depending,
follow-up changes) it turned out in the review thread to be controversial. The
discussion didn't come to a conclusion yet. I'm re-adding the old form to fix
the API regression and to provide a better base for discussion, possibly on
llvm-dev.
A difference to the original function is that it can't be called with GEPs
(similarly to how it was already the case for compares). In order to support
opaque pointers in the future, folding GEPs needs to be passed the source
element type, which is not possible with the current API.
Reviewers: dberlin, reames
Subscribers: dblaikie, eddyb
Differential Revision: http://reviews.llvm.org/D17901
llvm-svn: 263501
Summary: There are places in MachineBlockPlacement where a worklist is filled in pretty much identical way. The code is duplicated. This refactor it so that the same code is used in both scenarii.
Reviewers: chandlerc, majnemer, rafael, MatzeB, escha, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18077
llvm-svn: 263495
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263490
As noted in:
https://llvm.org/bugs/show_bug.cgi?id=26636
This doesn't accomplish anything on its own. It's the first step towards preserving
and using branch weights with selects.
The next step would be to make sure we're propagating the info in all of the other
places where we create selects (SimplifyCFG, InstCombine, etc). I don't think there's
an easy fix to make this happen; we have to look at each transform individually to
determine how to correctly propagate the weights.
Along with that step, we need to then use the weights when making subsequent transform
decisions such as discussed in http://reviews.llvm.org/D16836.
The inliner test is independent but closely related. It verifies that metadata is
preserved when both branches and selects are cloned.
Differential Revision: http://reviews.llvm.org/D18133
llvm-svn: 263482
Summary:
Previously we had a notion of convergent functions but not of convergent
calls. This is insufficient to correctly analyze calls where the target
is unknown, e.g. indirect calls.
Now a call is convergent if it targets a known-convergent function, or
if it's explicitly marked as convergent. As usual, we can remove
convergent where we can prove that no convergent operations are
performed in the call.
Originally landed as r261544, then reverted in r261544 for (incidental)
build breakage. Re-landed here with no changes.
Reviewers: chandlerc, jingyue
Subscribers: llvm-commits, tra, jhen, hfinkel
Differential Revision: http://reviews.llvm.org/D17739
llvm-svn: 263481
Some instructions were missing isBranch, isCall, or isTerminator
flags. This didn't really affect code generation since most of
the affected patterns were used only for the AsmParser and/or
disassembler.
However, it could affect tools using the MC layer to disassemble
and parse binary code (e.g. via MCInstrDesc::mayAffectControlFlow).
llvm-svn: 263478
The bad behavior happens when we have a function with a long linear chain of
basic blocks, and have a live range spanning most of this chain, but with very
few uses.
Let say we have only 2 uses.
The Hopfield network is only seeded with two active blocks where the uses are,
and each iteration of the outer loop in `RAGreedy::growRegion()` only adds two
new nodes to the network due to the completely linear shape of the CFG.
Meanwhile, `SpillPlacer->iterate()` visits the whole set of discovered nodes,
which adds up to a quadratic algorithm.
This is an historical accident effect from r129188.
When the Hopfield network is expanding, most of the action is happening on the
frontier where new nodes are being added. The internal nodes in the network are
not likely to be flip-flopping much, or they will at least settle down very
quickly. This means that while `SpillPlacer->iterate()` is recomputing all the
nodes in the network, it is probably only the two frontier nodes that are
changing their output.
Instead of recomputing the whole network on each iteration, we can maintain a
SparseSet of nodes that need to be updated:
- `SpillPlacement::activate()` adds the node to the todo list.
- When a node changes value (i.e., `update()` returns true), its neighbors are
added to the todo list.
- `SpillPlacement::iterate()` only updates the nodes in the list.
The result of Hopfield iterations is not necessarily exact. It should converge
to a local minimum, but there is no guarantee that it will find a global
minimum. It is possible that updating nodes in a different order will cause us
to switch to a different local minimum. In other words, this is not NFC, but
although I saw a few runtime improvements and regressions when I benchmarked
this change, those were side effects and actually the performance change is in
the noise as expected.
Huge thanks to Jakob Stoklund Olesen <stoklund@2pi.dk> for his feedbacks,
guidance and time for the review.
llvm-svn: 263460
When the SP in not changed because of realignment/VLAs etc., we restore the SP
by using the previous value of SP and not the FP. Breaking the dependency will
help in cases when the epilog of a callee is close to the epilog of the caller;
for then "sub sp, fp, #" depends on the load restoring the FP in the epilog of
the callee.
http://reviews.llvm.org/D18060
Patch by Aditya Kumar and Evandro Menezes.
llvm-svn: 263458
Converting masked vector loads to regular vector loads for x86 AVX should always be a win.
I raised the legality issue of reading the extra memory bytes on llvm-dev. I did not see any
objections.
1. x86 already does this kind of optimization for multiple scalar loads -> vector load.
2. If other targets have the same flexibility, we could move this transform up to CGP or DAGCombiner.
Differential Revision: http://reviews.llvm.org/D18094
llvm-svn: 263446
Summary:
MIPSR6 introduces a class of branches called compact branches. Unlike the
traditional MIPS branches which have a delay slot, compact branches do not
have a delay slot. The instruction following the compact branch is only
executed if the branch is not taken and must not be a branch.
It works by generating compact branches for MIPS32R6 when the delay slot
filler cannot fill a delay slot. Then, inspecting the generated code for
forbidden slot hazards (a compact branch with an adjacent branch or other
CTI) and inserting nops to clear this hazard.
Patch by Simon Dardis.
Reviewers: vkalintiris, dsanders
Subscribers: MatzeB, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16353
llvm-svn: 263444
Summary:
When multiple threads perform an atomic op with the same arguments, they
will usually see different return values.
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18101
llvm-svn: 263440
On the z13, it turns out to be more efficient to access a full
floating-point register than just the upper half (as done e.g.
by the LE and LER instructions).
Current code already takes this into account when loading from
memory by using the LDE instruction in place of LE. However,
we still generate LER, which shows the same performance issues
as LE in certain circumstances.
This patch changes the back-end to emit LDR instead of LER to
implement FP32 register-to-register copies on z13.
llvm-svn: 263431
Summary:
With the addition of checks to ensure that operands have a strict ordering
it has become tricky to manage the order in the way I originally intended.
This patch linearizes the ordering which simplifies the implementation but
requires an order that is arbitrary in places. Here are some examples:
* uimm4 < uimm5 < uimm6
* simm4 < uimm4 < simm5 < uimm5
* uimm5 < uimm5_plus1 (1..32) < uimm5_plus32 (32..63) < uimm6
The term 'superset' starts to break down here since the *_plus* classes
are not true supersets of uimm5 (but they are still subsets of uimm6).
* uimm5 < uimm5_64, and uimm5 < vsplat_uimm5
This is entirely arbitrary. We need an ordering and what we pick is
unimportant since only one is possible for a given mnemonic.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D17723
llvm-svn: 263423
s_bitset0_b64, s_bitset1_b64 has 32-bit src0, not 64-bit.
s_rfe_b64 has just one destination operand and no source.
Uncomment S_BITCMP* and S_SETVSKIP, adjust SOPC_* classes for that.
Add s_memrealtime test and change comments in smem.s to follow common style.
Change test for s_memtime to use non-zero register to make it really test encoding.
Add tests for s_buffer_load*.
Add tests for SOPC instructions (same for SI and VI)
Differential Revision: http://reviews.llvm.org/D18040
llvm-svn: 263420
It's failing to build on VS2015 with:
C:\b\build\slave\ClangToTWin\build\src\third_party\llvm\lib\Target\WebAssembly\WebAssemblyRegStackify.cpp(520):
error C2668: 'llvm::make_reverse_iterator': ambiguous call to overloaded function
C:\b\build\slave\ClangToTWin\build\src\third_party\llvm\include\llvm/ADT/STLExtras.h(217):
note: could be 'std::reverse_iterator<llvm::MachineBasicBlock::iterator>
llvm::make_reverse_iterator<llvm::MachineInstrBundleIterator<llvm::MachineInstr>>(IteratorTy)'
with
[
IteratorTy=llvm::MachineInstrBundleIterator<llvm::MachineInstr>
]
C:\b\depot_tools\win_toolchain\vs_files\391bbf1220d3edcd3cc3fccdb56224181e3b13a7\win_sdk\bin\..\..\VC\include\xutility(1217):
note: or 'std::reverse_iterator<llvm::MachineBasicBlock::iterator>
std::make_reverse_iterator<llvm::MachineInstrBundleIterator<llvm::MachineInstr>>(_RanIt)' [found using argument-dependent lookup]
with
[
_RanIt=llvm::MachineInstrBundleIterator<llvm::MachineInstr>
]
I don't have VS2015 locally at the moment, but hopefully this will help.
llvm-svn: 263418
The motivating example is this
for (j = n; j > 1; j = i) {
i = j / 2;
}
The signed division is safely to be changed to an unsigned division (j is known
to be larger than 1 from the loop guard) and later turned into a single shift
without considering the sign bit.
llvm-svn: 263406
Summary: This comes from work to make attribute manipulable via the C API.
Reviewers: gottesmm, hfinkel, baldrick, echristo, tejohnson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18128
llvm-svn: 263404
The SSE41 v8i16 shift lowering using (v)pblendvb is great for non-constant shift amounts, but if it is constant then we can efficiently reduce the VSELECT to shuffles with the pre-SSE41 lowering.
llvm-svn: 263383
Fundamentally, the length of a variable or function name is bound by the
maximum size of a record: 0xffff. However, the name doesn't live in a
vacuum; other data is associated with the name, lowering the bound
further.
We would naively attempt to emit the name, causing us to assert because
the record would no-longer fit in 16-bits. Instead, truncate the name
but preserve as much as we can.
While I have tested this locally, I've decided to not commit it due to
the test's size.
N.B. While this behavior is undesirable, it is better than MSVC's
behavior. They seem to truncate to ~4000 characters.
llvm-svn: 263378
It had a weird artificial limitation on the write side: the comdat name
couldn't be bigger than 2**16. However, the reader had no such
limitation. Make the reader and the writer agree.
llvm-svn: 263377
This follows up on the related AVX instruction transforms, but this
one is too strange to do anything more with. Intel's behavioral
description of this instruction in its Software Developer's Manual
is tragi-comic.
llvm-svn: 263340
This patch corresponds to review:
http://reviews.llvm.org/D17712
We were not clearing the TOC vector in PPCAsmPrinter when initializing it. This
caused duplicate definition asserts when the pass is reused on the module
(i.e. with -compile-twice or in JIT contexts).
llvm-svn: 263338
cmpxchg[8|16]b uses RBX as one of its argument.
In other words, using this instruction clobbers RBX as it is defined to hold one
the input. When the backend uses dynamically allocated stack, RBX is used as a
reserved register for the base pointer.
Reserved registers have special semantic that only the target understands and
enforces, because of that, the register allocator don’t use them, but also,
don’t try to make sure they are used properly (remember it does not know how
they are supposed to be used).
Therefore, when RBX is used as a reserved register but defined by something that
is not compatible with that use, the register allocator will not fix the
surrounding code to make sure it gets saved and restored properly around the
broken code. This is the responsibility of the target to do the right thing with
its reserved register.
To fix that, when the base pointer needs to be preserved, we use a different
pseudo instruction for cmpxchg that save rbx.
That pseudo takes two more arguments than the regular instruction:
- One is the value to be copied into RBX to set the proper value for the
comparison.
- The other is the virtual register holding the save of the value of RBX as the
base pointer. This saving is done as part of isel (i.e., we emit a copy from
rbx).
cmpxchg_save_rbx <regular cmpxchg args>, input_for_rbx_reg, save_of_rbx_as_bp
This gets expanded into:
rbx = copy input_for_rbx_reg
cmpxchg <regular cmpxchg args>
rbx = save_of_rbx_as_bp
Note: The actual modeling of the pseudo is a bit more complicated to make sure
the interferes that appears after the pseudo gets expanded are properly modeled
before that expansion.
This fixes PR26883.
llvm-svn: 263325
commit ae14bf6488e8441f0f6d74f00455555f6f3943ac
Author: Mehdi Amini <mehdi.amini@apple.com>
Date: Fri Mar 11 17:15:50 2016 +0000
Remove PreserveNames template parameter from IRBuilder
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263258
91177308-0d34-0410-b5e6-96231b3b80d8
until we can figure out what to do about clang and Release build testing.
This reverts commit 263258.
llvm-svn: 263321
Improve vector extension of vectors on hardware without dedicated VSEXT/VZEXT instructions.
We already convert these to SIGN_EXTEND_VECTOR_INREG/ZERO_EXTEND_VECTOR_INREG but can further improve this by using the legalizer instead of prematurely splitting into legal vectors in the combine as this only properly helps for lowering to VSEXT/VZEXT.
Removes a lot of unnecessary any_extend + mask pattern - (Fix for PR25718).
Differential Revision: http://reviews.llvm.org/D17932
llvm-svn: 263303
Summary:
This intrinsic, together with deoptimization operand bundles, allow
frontends to express transfer of control and frame-local state from
one (typically more specialized, hence faster) version of a function
into another (typically more generic, hence slower) version.
In languages with a fully integrated managed runtime this intrinsic can
be used to implement "uncommon trap" like functionality. In unmanaged
languages like C and C++, this intrinsic can be used to represent the
slow paths of specialized functions.
Note: this change does not address how `@llvm.experimental_deoptimize`
is lowered. That will be done in a later change.
Reviewers: chandlerc, rnk, atrick, reames
Subscribers: llvm-commits, kmod, mjacob, maksfb, mcrosier, JosephTremoulet
Differential Revision: http://reviews.llvm.org/D17732
llvm-svn: 263281
Value profile instrumentation treats inline asm calls like they are
indirect calls. This causes problems when the 'Callee' is passed to a
ptrtoint cast -- the verifier rightly claims that this is bogus and
crashes opt.
llvm-svn: 263278
Summary:
This patch adds support for including a full reference graph including
call graph edges and other GV references in the summary.
The reference graph edges can be used to make importing decisions
without materializing any source modules, can be used in the plugin
to make file staging decisions for distributed build systems, and is
expected to have other uses.
The call graph edges are recorded in each function summary in the
bitcode via a list of <CalleeValueIds, StaticCount> tuples when no PGO
data exists, or <CalleeValueId, StaticCount, ProfileCount> pairs when
there is PGO, where the ValueId can be mapped to the function GUID via
the ValueSymbolTable. In the function index in memory, the call graph
edges reference the target via the CalleeGUID instead of the
CalleeValueId.
The reference graph edges are recorded in each summary record with a
list of referenced value IDs, which can be mapped to value GUID via the
ValueSymbolTable.
Addtionally, a new summary record type is added to record references
from global variable initializers. A number of bitcode records and data
structures have been renamed to reflect the newly expanded scope of the
summary beyond functions. More cleanup will follow.
Reviewers: joker.eph, davidxl
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17212
llvm-svn: 263275
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263258
Summary:
Following r263086, we are replacing this by a runtime check.
More cleanup will follow on the IRBuilder itself, but I submitted
this patch separately as SROA has a fancy "prefixInserter" class
that needs extra-love.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18022
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263256
The truncation was causing the sorting algorithm to behave oddly when comparing
positive and negative offsets. Fortunately, this doesn't currently happen in
practice and was exposed by a WIP. Thus, I can't test this change now, but the
follow on patch will.
llvm-svn: 263255
member type.
Because of how this type is used by the ValueTable, it cannot actually
have hidden visibility. GCC actually nicely warns about this but Clang
just silently ... I don't even know. =/ We should do a better job either
way though.
This should resolve a bunch of the GCC warnings about visibility that
the port of GVN triggered and make the visibility story a bit more
correct.
llvm-svn: 263250
Added new string conversion wrappers that convert between `std::string` (of UTF-8 bytes) and `std::wstring`, which is particularly useful for Win32 interop. Also fixed a missing string conversion for `getenv` on Win32, using these new wrappers.
The motivation behind this is to provide the support functions required for LLDB to work properly on Windows with non-ASCII data; however, the functions are not LLDB specific.
Patch by cameron314
Differential Revision: http://reviews.llvm.org/D17549
llvm-svn: 263247
Its not enough that we test for SSSE3 - that's only OK for 128-bit vectors - we also need to test for AVX2 / AVX512BW for 256/512 bit vector cases.
llvm-svn: 263239
This doesn't change how many times we construct domtrees in the normal
pipeline, and it removes fragility and instability where basic-aa may
not be run in time to see domtrees because they happen to be constructed
afterward.
This isn't quite as clean as the change to memdep because there is
a mode where basic-aa specifically runs without domtrees -- in the
hacking version used by function-attrs with the legacy pass manager.
llvm-svn: 263234
This doesn't cause us to construct dominator trees any more often in the
normal pipeline, and removes an entire mode of memdep that needed to be
reasoned about and maintained. Perhaps more importantly, it removes the
ability for the results of memdep to be different because of accidental
pass scheduling goofs or the order of evaluation of 'getResult' calls.
Essentially, 'getCachedResult', unless across IR-unit boundaries, is
extremely dangerous. We need to work much harder to avoid it (or its
analog in the old pass manager).
llvm-svn: 263232
much to my horror, so use variables to fix it in place.
This terrifies me. Both basic-aa and memdep will provide more precise
information when the domtree and/or the loop info is available. Because
of this, if your pass (like GVN) requires domtree, and then queries
memdep or basic-aa, it will get more precise results. If it does this in
the other order, it gets less precise results.
All of the ideas I have for fixing this are, essentially, terrible. Here
I've just caused us to stop having unspecified behavior as different
implementations evaluate the order of these arguments differently. I'm
actually rather glad that they do, or the fragility of memdep and
basic-aa would have gone on unnoticed. I've left comments so we don't
immediately break this again. This should fix bots whose host compilers
evaluate the order of arguments differently from Clang.
llvm-svn: 263231
This was originally a pointer to support pass managers which didn't use
AnalysisManagers. However, that doesn't realistically come up much and
the complexity of supporting it doesn't really make sense.
In fact, *many* parts of the pass manager were just assuming the pointer
was never null already. This at least makes it much more explicit and
clear.
llvm-svn: 263219
clarify their purpose.
Firstly, call them "...Mixin" types so it is clear that there is no
type hierarchy being formed here. Secondly, use the term 'Info' to
clarify that they aren't adding any interesting *semantics* to the
passes or analyses, just exposing APIs used by the management layer to
get information about the pass or analysis.
Thanks to Manuel for helping pin down the naming confusion here and come
up with effective names to address it.
In case you already have some out-of-tree stuff, the following should be
roughly what you want to update:
perl -pi -e 's/\b(Pass|Analysis)Base\b/\1InfoMixin/g'
llvm-svn: 263217
work in the face of the limitations of DLLs and templated static
variables.
This requires passes that use the AnalysisBase mixin provide a static
variable themselves. So as to keep their APIs clean, I've made these
private and befriended the CRTP base class (which is the common
practice).
I've added documentation to AnalysisBase for why this is necessary and
at what point we can go back to the much simpler system.
This is clearly a better pattern than the extern template as it caught
*numerous* places where the template magic hadn't been applied and
things were "just working" but would eventually have broken
mysteriously.
llvm-svn: 263216
Since the names are used in a loop this does more work in debug builds. In
release builds value names are generally discarded so we don't have to do
the concatenation at all. It's also simpler code, no functional change
intended.
llvm-svn: 263215
The constant is now at source operand 1 (previously at 2).
This is also how it is in legacy AMD sp3 assembler.
Update tests.
Differential Revision: http://reviews.llvm.org/D17984
llvm-svn: 263212
tests to run GVN in both modes.
This is mostly the boring refactoring just like SROA and other complex
transformation passes. There is some trickiness in that GVN's
ValueNumber class requires hand holding to get to compile cleanly. I'm
open to suggestions about a better pattern there, but I tried several
before settling on this. I was trying to balance my desire to sink as
much implementation detail into the source file as possible without
introducing overly many layers of abstraction.
Much like with SROA, the design of this system is made somewhat more
cumbersome by the need to support both pass managers without duplicating
the significant state and logic of the pass. The same compromise is
struck here.
I've also left a FIXME in a doxygen comment as the GVN pass seems to
have pretty woeful documentation within it. I'd like to submit this with
the FIXME and let those more deeply familiar backfill the information
here now that we have a nice place in an interface to put that kind of
documentaiton.
Differential Revision: http://reviews.llvm.org/D18019
llvm-svn: 263208
Frontend authors are strongly encouraged to keep allocas
in the entry block, so don't bother visiting every instruction
in the other blocks of the function.
llvm-svn: 263206
llvm::getDISubprogram walks the instructions in a function, looking for one in the scope of the current function, so that it can find the !dbg entry for the subprogram itself.
Now that !dbg is attached to functions, this should not be necessary. This patch changes all uses to just query the subprogram directly on the function.
Ideally this should be NFC, but in reality its possible that a function:
has no !dbg (in which case there's likely a bug somewhere in an opt pass), or
that none of the instructions had a scope referencing the function, so we used to not find the !dbg on the function but now we will
Reviewed by Duncan Exon Smith.
Differential Revision: http://reviews.llvm.org/D18074
llvm-svn: 263184
The code assumed that we always had a preheader without making the pass
dependent on LoopSimplify.
Thanks to Mattias Eriksson V for reporting this.
llvm-svn: 263173
Looking at the IR definition of a masked load made me realize
there was no reason to use a shuffle here, so we don't need
to convert the format of the mask at all.
llvm-svn: 263167
Generalise the existing SIGN_EXTEND to SIGN_EXTEND_VECTOR_INREG combine to support zero extension as well and get rid of a lot of unnecessary ANY_EXTEND + mask patterns.
Reapplied with a fix for PR26870 (avoid premature use of TargetConstant in ZERO_EXTEND_VECTOR_INREG expansion).
Differential Revision: http://reviews.llvm.org/D17691
llvm-svn: 263159
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 263158
Summary:
Unless we plan to do later postpass metadata linking (ThinLTO special mode),
always invoke metadata materialization at the start of IRLinker::run().
This avoids the need for clients who use lazy metadata loading to
explicitly invoke materializeMetadata before the IRMover, which in
turn invokes IRLinker::run and needs materialized metadata for mapping.
Came up in the context of an LLD issue (D17982).
Reviewers: rafael
Subscribers: silvas, llvm-commits
Differential Revision: http://reviews.llvm.org/D17992
llvm-svn: 263143
Summary:
They correspond to BUFFER_LOAD/STORE_FORMAT_XYZW and will be used by Mesa
to implement the GL_ARB_shader_image_load_store extension.
The intention is that for llvm.amdgcn.buffer.load.format, LLVM will decide
whether one of the _X/_XY/_XYZ opcodes can be used (similar to image sampling
and loads). However, this is not currently implemented.
For llvm.amdgcn.buffer.store, LLVM cannot decide to use one of the "smaller"
opcodes and therefore the intrinsic is overloaded. Currently, only the v4f32
is actually implemented since GLSL also only has a vec4 variant of the store
instructions, although it's conceivable that Mesa will want to be smarter
about this in the future.
BUFFER_LOAD_FORMAT_XYZW is already exposed via llvm.SI.vs.load.input, which
has a legacy name, pretends not to access memory, and does not capture the
full flexibility of the instruction.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17277
llvm-svn: 263140
When trying to replace an add to esp with pops, we need to choose dead
registers to pop into. Registers clobbered by the call and not imp-def'd
by it should be safe. Except that it's not enough to check the register
itself isn't defined, we also need to make sure no overlapping registers
are defined either.
This fixes PR26711.
Differential Revision: http://reviews.llvm.org/D18029
llvm-svn: 263139
Summary:
Peephole optimization that generates a single TBZ/TBNZ instruction
for test and branch sequences like in the example below. This handles
the cases that miss folding of AND into TBZ/TBNZ during ISelLowering of BR_CC
Examples:
and w8, w8, #0x400
cbnz w8, L1
to
tbnz w8, #10, L1
Reviewers: MatzeB, jmolloy, mcrosier, t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17942
llvm-svn: 263136
This patch adds Cortex-R8 to Target Parser and TableGen.
It also adds CodeGen tests for the build attributes.
Patch by Pablo Barrio.
Differential Revision: http://reviews.llvm.org/D17925
llvm-svn: 263132
This is avoiding a naming conflict with opt and llc.
While opt and llc don't link to LTO usually, users that are building a
monolithic libLLVM.dylib and linking the tools to it would have a
runtime error because of the duplicate cl::opt registration.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263127
The initial change was insufficiently complete for always getting the semantics
of __builtin_longjmp correct. The builtin is translated into a
`tInt_eh_sjlj_longjmp` DAG node. This node set R7 as clobbered. However, the
code would then follow up with a clobber of R11. I had failed to notice the
imp-def,kill on R7 in the isel. Unfortunately, it seems that it is not possible
to conditionalise the Defs list via an !if. Instead, construct a new parallel
WIN node and prefer that when targeting windows. This ensures that we now both
correctly model the __builtin_longjmp as well as construct the frame in a more
ABI conformant manner.
llvm-svn: 263123
of, and I misdiagnosed for months and months.
Andrea has had a patch for this forever, but I just couldn't see how
it was fixing the root cause of the problem. It didn't make sense to me,
even though the patch was perfectly good and the analysis of the actual
failure event was *fantastic*.
Well, I came back to it today because the patch has sat for *far* too
long and needs attention and decided I wouldn't let it go until I really
understood what was going on. After quite some time in the debugger,
I finally realized that in fact I had just missed an important case with
my previous attempt to fix PR22093 in r225149. Not only do we need to
handle loads that won't be split, but stores-of-loads that we won't
split. We *do* actually have enough logic in the presplitting to form
new slices for split stores.... *unless* we decided not to split them!
I'm so sorry that it took me this long to come to the realization that
this is the issue. It seems so obvious in hind sight (of course).
Anyways, the fix becomes *much* smaller and more focused. The fact that
we're left doing integer smashing is related to the FIXME in my original
commit: fundamentally, we're not aggressive about pre-splitting for
loads and stores to the same alloca. If we want to get aggressive about
this, it'll need both what Andrea had put into the proposed fix, but
also a *lot* more logic to essentially iteratively pre-split the alloca
until we can't do any more. As I said in that commit log, its really
unclear that this is the right call. Instead, the integer blending and
letting targets lower this to narrower stores seems slightly better. But
we definitely shouldn't really go down that path just to fix this bug.
Again, tons of thanks are owed to Andrea and others at Sony for working
on this bug. I really should have seen what was going on here and
re-directed them sooner. =////
llvm-svn: 263121
WoA uses r11 as the FP even though it is a pure thumb-2 environment in contrast
to AAPCS which states r7. This adjusts __builtin_longjmp to not clobber r7 and
to properly restore the frame pointer on execution.
llvm-svn: 263118
We already have the instruction extracted into 'I', just cast that to
a store the way we do for loads. Also, we don't enter the if unless SI
is non-null, so don't test it again for null.
I'm pretty sure the entire test there can be nuked, but this is just the
trivial cleanup.
llvm-svn: 263112
actually finish wiring up the old call graph.
There were bugs in the old call graph that hadn't been caught because it
wasn't being tested. It wasn't being tested because it wasn't in the
pipeline system and we didn't have a printing pass to run in tests. This
fixes all of that.
As for why I'm still keeping the old call graph alive its so that I can
port GlobalsAA to the new pass manager with out forking it to work with
the lazy call graph. That's clearly the right eventual design, but it
seems pragmatic to defer that until its necessary. The old call graph
works just fine for GlobalsAA.
llvm-svn: 263104
This patch reorders the combining of target shuffle masks so that when a unary shuffle takes a binary shuffle as its input but only references one of its inputs it can correctly combine into a unary shuffle mask.
This is starting to encroach on the purpose of resolveTargetShuffleInputs, but I don't want to remove it until we definitely know we won't need it for full binary shuffle combining.
There is a lot more work before we can properly support binary target shuffle masks but this was an easy case to add support for.
Differential Revision: http://reviews.llvm.org/D17858
llvm-svn: 263102
location in the opt tool to live along side the analysis in LLVM's
libraries.
No functionality changed here, but this will allow me to port the
printer to the new pass manager as well.
llvm-svn: 263101
There is another pass by the generic name 'CallGraphPrinter' which is
actually just a call graph printer tucked away inside the opt tool. I'd
like to bring it out and make it follow the same patterns as the rest of
the CallGraph code, but doing so would end up conflicting with the name
of the DOT printing pass. So this makes the DOT printing pass name be
more precise.
No functionality changed here.
llvm-svn: 263100
Operation SCALAR_TO_VECTOR for v64i8 and v32i16 should be lowered if BW feature is "on".
Differential Revision: http://reviews.llvm.org/D17994
llvm-svn: 263097
This change adds a support for a preserve_most calling convention to the AArch64 backend, similar to how it was done for X86-64.
There is also a subsequent patch on top of this one to add a tail-calls support for this calling convention.
Differential Revision: http://reviews.llvm.org/D18016
llvm-svn: 263092
MinVecRegSize is currently hardcoded to 128; this patch adds a cl::opt
to allow changing it. I tried not to change any existing behavior for the default
case.
Differential revision: http://reviews.llvm.org/D13278
llvm-svn: 263089
Summary:
This is intended to be a performance flag, on the same level as clang
cc1 option "--disable-free". LLVM will never initialize it by default,
it will be up to the client creating the LLVMContext to request this
behavior. Clang will do it by default in Release build (just like
--disable-free).
"opt" and "llc" can opt-in using -disable-named-value command line
option.
When performing LTO on llvm-tblgen, the initial merging of IR peaks
at 92MB without this patch, and 86MB after this patch,setNameImpl()
drops from 6.5MB to 0.5MB.
The total link time goes from ~29.5s to ~27.8s.
Compared to a compile-time flag (like the IRBuilder one), it performs
very close. I profiled on SROA and obtain these results:
420ms with IRBuilder that preserve name
372ms with IRBuilder that strip name
375ms with IRBuilder that preserve name, and a runtime flag to strip
Reviewers: chandlerc, dexonsmith, bogner
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17946
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263086
need to be changed for porting to the new pass manager.
Also sink the comment on the ValueTable class back to that class instead
of it dangling on an anonymous namespace.
No functionality changed.
llvm-svn: 263084
This is a fairly straightforward port to the new pass manager with one
exception. It removes a very questionable use of releaseMemory() in
the old pass to invalidate its caches between runs on a function.
I don't think this is really guaranteed to be safe. I've just used the
more direct port to the new PM to address this by nuking the results
object each time the pass runs. While this could cause some minor malloc
traffic increase, I don't expect the compile time performance hit to be
noticable, and it makes the correctness and other aspects of the pass
much easier to reason about. In some cases, it may make things faster by
making the sets and maps smaller with better locality. Indeed, the
measurements collected by Bruno (thanks!!!) show mostly compile time
improvements.
There is sadly very limited testing at this point as there are only two
tests of memdep, and both rely on GVN. I'll be porting GVN next and that
will exercise this heavily though.
Differential Revision: http://reviews.llvm.org/D17962
llvm-svn: 263082
MemoryDependenceAnalysis had a hard-coded exception to the general aliasing rules for malloc and calloc. The reasoning that applied there is equally valid in BasicAA and clarifies the remaining logic in MDA.
In principal, this can expose slightly more optimization opportunities, but since essentially all of our aliasing aware memory optimization passes go through MDA, this will likely be NFC in practice.
Differential Revision: http://reviews.llvm.org/D15912
llvm-svn: 263075
This patch teaches CGP to duplicate addressing mode computations into cold paths (detected via explicit cold attribute on calls) if required to let addressing mode be safely sunk into the basic block containing each load and store.
In general, duplicating code into cold blocks may result in code growth, but should not effect performance. In this case, it's better to duplicate some code than to put extra pressure on the register allocator by making it keep the address through the entirely of the fast path.
This patch only handles addressing computations, but in principal, we could implement a more general cold cold scheduling heuristic which tries to reduce register pressure in the fast path by duplicating code into the cold path. Getting the profitability of the general case right seemed likely to be challenging, so I stuck to the existing case (addressing computation) we already had.
Differential Revision: http://reviews.llvm.org/D17652
llvm-svn: 263074
This patch teaches LICM's implementation of store promotion to exploit the fact that the memory location being accessed might be provable thread local. The fact it's thread local weakens the requirements for where we can insert stores since no other thread can observe the write. This allows us perform store promotion even in cases where the store is not guaranteed to execute in the loop.
Two key assumption worth drawing out is that this assumes a) no-capture is strong enough to imply no-escape, and b) standard allocation functions like malloc, calloc, and operator new return values which can be assumed not to have previously escaped.
In future work, it would be nice to generalize this so that it works without directly seeing the allocation site. I believe that the nocapture return attribute should be suitable for this purpose, but haven't investigated carefully. It's also likely that we could support unescaped allocas with similar reasoning, but since SROA and Mem2Reg should destroy those, they're less interesting than they first might seem.
Differential Revision: http://reviews.llvm.org/D16783
llvm-svn: 263072
The irony of this patch is that one CPU that is affected is AMD Jaguar, and Jaguar
has a completely double-pumped AVX implementation. But getting the cost model to
reflect that is a much bigger problem. The small goal here is simply to improve on
the lie that !AVX2 == SandyBridge.
Differential Revision: http://reviews.llvm.org/D18000
llvm-svn: 263069
Instead of a variable-blend instruction, form a blend with immediate because those are always cheaper.
Differential Revision: http://reviews.llvm.org/D17899
llvm-svn: 263067
When checking whether an smin is positive, we can move the comparison to one of the inputs if the other is known positive. If the known positive one is the min, then the other can't be negative. If the other is the min, then we compute the min.
Differential Revision: http://reviews.llvm.org/D17873
llvm-svn: 263059
I somehow missed this. The case in GCC (global_alloc) was similar to
the new testcase except it had an array of structs rather than a two
dimensional array.
Fixes RP26885.
llvm-svn: 263058
As part of r251146 InstCombine was extended to call computeKnownBits on
every value in the function to determine whether it happens to be
constant. This increases typical compiletime by 1-3% (5% in irgen+opt
time) in my measurements. On the other hand this case did not trigger
once in the whole llvm-testsuite.
This patch introduces the notion of ExpensiveCombines which are only
enabled for OptLevel > 2. I removed the check in InstructionSimplify as
that is called from various places where the OptLevel is not known but
given the rarity of the situation I think a check in InstCombine is
enough.
Differential Revision: http://reviews.llvm.org/D16835
llvm-svn: 263047
This will allow inline assembler code to utilize these features, but no automatic lowering is provided, except for the previously provided @llvm.trap, which lowers to "ta 5".
The change also separates out the different assembly language syntaxes for V8 and V9 Sparc. Previously, only V9 Sparc assembly syntax was provided.
The change also corrects the selection order of trap disassembly, allowing, e.g. "ta %g0 + 15" to be rendered, more readably, as "ta 15", ignoring the %g0 register. This is per the sparc v8 and v9 manuals.
Check-in includes many extra unit tests to check this works correctly on both V8 and V9 Sparc processors.
Code Reviewed at http://reviews.llvm.org/D17960.
llvm-svn: 263044
Removing the assertion is safe to do because any module level inline
assembly is always emitted first via AsmPrinter::doInitialization().
http://reviews.llvm.org/D16101
rdar://22690666
llvm-svn: 263033
Summary:
The code in SelectionDAG did not handle the case where the
register type and output types were different, but had the same size.
Reviewers: arsenm, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17940
llvm-svn: 263022
Original commit message:
calculate builtin_object_size if argument is a removable pointer
This patch fixes calculating correct value for builtin_object_size function
when pointer is used only in builtin_object_size function call and never
after that.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D17337
Reland the original change with a small modification (first do a null check
and then do the cast) to satisfy ubsan.
llvm-svn: 263011
Supprot DPP syntax as used in SP3 (except several operands syntax).
Added dpp-specific operands in td-files.
Added DPP flag to TSFlags to determine if instruction is dpp in InstPrinter.
Support for VOP2 DPP instructions in td-files.
Some tests for DPP instructions.
ToDo:
- VOP2bInst:
- vcc is considered as operand
- AsmMatcher doesn't apply mnemonic aliases when parsing operands
- v_mac_f32
- v_nop
- disable instructions with 64-bit operands
- change dpp_ctrl assembler representation to conform sp3
Review: http://reviews.llvm.org/D17804
llvm-svn: 263008
s_setpc_b64 has just one 64-bit source which is the address of instruction to jump to.
Differential Revision: http://reviews.llvm.org/D17888
llvm-svn: 263005
This implements a very simple conservative transformation that doesn't
require more than linear code size growth. There's room for much more
optimization in this space.
llvm-svn: 262982
Building on the previous change, this generalizes
ScalarEvolution::getRangeViaFactoring to work with
{Ext(C?A:B)+k0,+,Ext(C?A:B)+k1} where Ext can be a zero extend, sign
extend or truncate operation, and k0 and k1 are constants.
llvm-svn: 262979
This change generalizes ScalarEvolution::getRangeViaFactoring to work
with {Ext(C?A:B),+,Ext(C?A:B)} where Ext can be a zero extend, sign
extend or truncate operation.
llvm-svn: 262978
This is intended to provide a parallel (threaded) ThinLTO scheme
for linker plugin use through the libLTO C API.
The intent of this patch is to provide a first implementation as a
proof-of-concept and allows linker to start supporting ThinLTO by
definiing the libLTO C API. Some part of the libLTO API are left
unimplemented yet. Following patches will add support for these.
The current implementation can link all clang/llvm binaries.
Differential Revision: http://reviews.llvm.org/D17066
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262977
The fix consisting in using the library call for atomic compare and swap when
the instruction is not safe to use may be incorrect. Indeed the library call may
not exist on all platform. In other words, we need a better fix!
llvm-svn: 262943
This re-applies r262886 with a fix for 32 bit platforms that have 8 byte
pointer alignment, effectively reverting r262892.
Original Message:
Currently some SDNode operands are malloc'd, some are stored inline in
subclasses of SDNode, and some are thrown into a BumpPtrAllocator.
This scheme is complex, inconsistent, and makes refactoring SDNodes
fairly difficult.
Instead, we can allocate all of the operands using an ArrayRecycler
that wraps a BumpPtrAllocator. This keeps the cache locality when
iterating operands, improves locality when iterating SDNodes without
looking at operands, and vastly simplifies the ownership semantics.
It also means we stop overallocating SDNodes by 2-3x and will make it
simpler to fix the rampant undefined behaviour we have in how we
mutate SDNodes from one kind to another (See llvm.org/pr26808).
This is NFC other than the changes in memory behaviour, and I ran some
LNT tests to make sure this didn't hurt compile time. Not many tests
changed: there were a couple of 1-2% regressions reported, but there
were more improvements (of up to 4%) than regressions.
llvm-svn: 262902
Looks like the largest SDNode is different between 32 and 64 bit now,
so this is breaking 32 bit bots. Reverting while I figure out a fix.
This reverts r262886.
llvm-svn: 262892
Currently some SDNode operands are malloc'd, some are stored inline in
subclasses of SDNode, and some are thrown into a BumpPtrAllocator.
This scheme is complex, inconsistent, and makes refactoring SDNodes
fairly difficult.
Instead, we can allocate all of the operands using an ArrayRecycler
that wraps a BumpPtrAllocator. This keeps the cache locality when
iterating operands, improves locality when iterating SDNodes without
looking at operands, and vastly simplifies the ownership semantics.
It also means we stop overallocating SDNodes by 2-3x and will make it
simpler to fix the rampant undefined behaviour we have in how we
mutate SDNodes from one kind to another (See llvm.org/pr26808).
This is NFC other than the changes in memory behaviour, and I ran some
LNT tests to make sure this didn't hurt compile time. Not many tests
changed: there were a couple of 1-2% regressions reported, but there
were more improvements (of up to 4%) than regressions.
llvm-svn: 262886
Before this change, we would get the type definition in the middle
of the instruction.
E.g., %0(48) = G_ADD %struct_alias = type { i32, i16 } %edi, %edi
Now, we have just the expected type name:
%0(48) = G_ADD %struct_alias %edi, %edi
llvm-svn: 262885
Without actually parsing a type it is difficult to perdict where
the type definition ends. In other words, instead of expecting
the user of the parser API to hand over only the relevant bits
of the string being parsed, take the whole string, parse the type,
and get back the number of characters that have been read.
This will be used by the MIR testing infrastructure.
llvm-svn: 262884
TSan instrumentation functions for atomic stores, loads, and cmpxchg work on
integer value types. This patch adds casts before calling TSan instrumentation
functions in cases where the value is a pointer.
Differential Revision: http://reviews.llvm.org/D17833
llvm-svn: 262876
Now the type API is always available, but when global-isel is not
built the implementation does nothing.
Note: The implementation free of ifdefs is WIP and tracked here in PR26576.
llvm-svn: 262873
The mir infrastructure will need this for generic instructions and currently
this feature was only available through the anonymous TypePrinter class.
llvm-svn: 262869
This is useful for MIR serialization. Indeed generic machine instructions
must have a type and we don't want to duplicate the logic in the MIParser.
llvm-svn: 262868
This lets select sub-targets enable this pass. The patch implements the
idea from the recent llvm-dev thread:
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/94925
The goal is to enable the LoopDataPrefetch pass for the Cyclone
sub-target only within Aarch64.
Positive and negative tests will be included in an upcoming patch that
enables selective prefetching of large-strided accesses on Cyclone.
llvm-svn: 262844
Until now curly braces could only be used in MS inline assembly to mark block start/end.
All curly braces were removed completely at a very early stage.
This approach caused bugs like:
"m{o}v eax, ebx" turned into "mov eax, ebx" without any error.
In addition, AVX-512 added special operands (e.g., k registers), which are also surrounded by curly braces that mark them as such.
Now, we need to keep the curly braces and identify at a later stage if they are marking block start/end (if so, ignore them), or surrounding special AVX-512 operands (if so, parse them as such).
This patch fixes the bug described above and enables the use of AVX-512 special operands.
This commit is the the llvm part of the patch.
The clang part of the review is: http://reviews.llvm.org/D17766
The llvm part of the review is: http://reviews.llvm.org/D17767
Differential Revision: http://reviews.llvm.org/D17767
llvm-svn: 262843
This reverts commit r262250.
It causes SPEC2006/gcc to generate wrong result (166.s) in AArch64 when
running with *ref* data set. The error happens with
"-Ofast -flto -fuse-ld=gold" or "-O3 -fno-strict-aliasing".
llvm-svn: 262839
This code has been successfully used to bootstrap libc++ in a no-asserts
mode for a very long time, so the code that follows cannot be completely
incorrect. I've added a test that shows the current behavior for this
kind of code with DFSan. If it is desirable for DFSan to do something
special when processing an invoke of a variadic function, it can be
added, but we shouldn't keep an assert that we've been ignoring due to
release builds anyways.
llvm-svn: 262829
This is much more clear and less surprising IMO. It also makes things
more consistent with the increasingly large chunk of LLVM code that
assumes true-on-success.
llvm-svn: 262826
duplicated comments.
In several cases these had diverged making them especially nice to
canonicalize. I checked to make sure we weren't losing important
information of course.
llvm-svn: 262825
the new pass manager.
The port will involve substantial edits here, and would likely introduce
bad formatting if formatted in isolation, so just get all the formatting
up to snuff. I'll also go through and try to freshen the doxygen here as
well as modernizing some of the code.
llvm-svn: 262821
Just like the existing find_as() method, the new insert_as() accepts
an extra parameter which is used as a key to find the bucket in the
map.
When creating a Constant, we want to check the map before actually
creating the object. In this case we have to perform two queries to
the map, and this extra parameter can save recomputing the hash value
for the second query.
This is a reapply of r260458, that was reverted because it was
suspected to be the cause of instability of an internal bot, but
wasn't confirmed.
Differential Revision: http://reviews.llvm.org/D16268
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262812
Summary: This make readRecord 20% faster, measured on an LTO build
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17911
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262811
Patch to add support for target shuffle combining of X86ISD::VPERMV3 nodes, including support for detecting unary shuffles.
This uncovered several issues with the X86ISD::VPERMV3 shuffle mask decoding of non-64 bit shuffle mask elements - the bit masking wasn't being correctly computed.
Removed non-constant pool mask decode path as we have no way of testing it right now.
Differential Revision: http://reviews.llvm.org/D17916
llvm-svn: 262809
Added support for decoding VPERMILPS variable shuffle masks that aren't in the constant pool.
Added target shuffle mask decoding for SCALAR_TO_VECTOR+VZEXT_MOVL cases - these can happen for v2i64 constant re-materialization
Followup to D17681
llvm-svn: 262784
btver1 is a SSSE3/SSE4a only CPU - it doesn't have AVX and doesn't support XSAVE.
Differential Revision: http://reviews.llvm.org/D17683
llvm-svn: 262782
It is possible to invoke these methods on an invalid input resulting in an
invalid substring construction. It seems that we do not have unit tests for
these methods. Tests to ensure that the invalid call is caught to follow in
clang.
Resolves PR26839.
llvm-svn: 262778
Rematerializing and merging into a bigger register class at the same
time, requires the subregister range lanemasks getting remapped to the
new register class.
This fixes http://llvm.org/PR26805
llvm-svn: 262768
copy coalescing with enabled subregister liveness can reveal undef uses,
previously this was only checked for the SrcReg in updateRegDefsUses()
but we need to check DstReg as well.
llvm-svn: 262767
When the lowering of the setjmp intrinsic requires
a global base pointer to be set, make sure such pointer
gets defined by the CGBR pass.
This fixes PR26742.
llvm-svn: 262762
cmpxchgXXb uses RBX as one of its implicit argument. I.e., when
we use that instruction we need to clobber RBX. This is generally
fine, expect when RBX is a reserved register because in that case,
the register allocator will not track its value and will not
save and restore it when interferences occur.
rdar://problem/24851412
llvm-svn: 262759
The x86 ret instruction has a 16 bit immediate indicating how many bytes
to pop off of the stack beyond the return address.
There is a problem when extremely large structs are passed by value: we
might not be able to fit the number of bytes to pop into the return
instruction.
To fix this, expand RET_FLAG a little later and use a special sequence
to clean the stack:
pop %ecx ; return address is now in %ecx
add $n, %esp ; clean the stack
push %ecx ; bring the return address back on the stack
ret ; pop the return address and jmp to it's value
llvm-svn: 262755
The diff is relatively large since I took a chance to rearrange the code I had to touch in a more obvious way, but the key bit is merely using the !range metadata when we can't analyze the instruction further. The previous !range metadata code was essentially just dead since no binary operator or cast will have !range metadata (per Verifier) and it was otherwise dropped on the floor.
llvm-svn: 262751
The divrem combine assumed the type of the div/rem is simple, which isn't
necessarily true. This probably worked fine until r250825, since it only
saw legal types, but now breaks when it runs as a pre-type-legalization
combine.
This fixes PR26835.
Differential Revision: http://reviews.llvm.org/D17878
llvm-svn: 262746
When div+rem calls on the same arguments are found, the ARM back-end merges the
two calls into one __aeabi_divmod call for up to 32-bits values. However,
for 64-bit values, which also have a lib call (__aeabi_ldivmod), it wasn't
merging the calls, and thus calling ldivmod twice and spilling the temporary
results, which generated pretty bad code.
This patch legalises 64-bit lib calls for divmod, so that now all the spilling
and the second call are gone. It also relaxes the DivRem combiner a bit on the
legal type check, since it was already checking for isLegalOrCustom on every
value, so the extra check for isTypeLegal was redundant.
Second attempt, creating TLI.isOperationCustom like isOperationExpand, to make
sure we only emit valid types or the ones that were explicitly marked as custom.
Now, passing check-all and test-suite on x86, ARM and AArch64.
This patch fixes PR17193 (and a long time FIXME in the tests).
llvm-svn: 262738
Summary:
This is necessary for when we run out of VGPRs and can no
longer use v_{read,write}_lane for spilling SGPRs.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17592
llvm-svn: 262732
Summary:
This allows us to use virtual registers when we need extra registers
for inserting spill instructions in SIRegisterInfo:eliminateFrameIndex().
Once all the frame indices have been eliminated, the
PrologEpilogueInserter does an extra pass over the program to replace
all virtual registers with physical ones.
This allows us to make more efficient use of our emergency spill slots,
so we only need to create one.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17591
llvm-svn: 262728
These correspond to IMAGE_ATOMIC_* and are going to be used by Mesa for the
GL_ARB_shader_image_load_store extension.
Initial change by Nicolai H.hnle
Differential Revision: http://reviews.llvm.org/D17401
llvm-svn: 262701
The RTDyldMemoryManager::getSymbolAddressInProcess method accepts a
linker-mangled symbol name, but it calls through to dlsym to do the lookup (via
DynamicLibrary::SearchForAddressOfSymbol), and dlsym expects an unmangled
symbol name.
Historically we've attempted to "demangle" by removing leading '_'s on all
platforms, and fallen back to an extra search if that failed. That's broken, as
it can cause symbols to resolve incorrectly on platforms that don't do mangling
if you query '_foo' and the process also happens to contain a 'foo'.
Fix this by demangling conditionally based on the host platform. That's safe
here because this function is specifically for symbols in the host process, so
the usual cross-process JIT looking concerns don't apply.
M unittests/ExecutionEngine/ExecutionEngineTest.cpp
M lib/ExecutionEngine/RuntimeDyld/RTDyldMemoryManager.cpp
llvm-svn: 262657
This experiment was originally about trying to use facts implied dominating conditions to infer more precise known bits. While the compile time was found to be acceptable on several large code bases, we never found sufficiently profitable examples to justify turning on the code by default. Given this, it's time to abandon the experiment.
Several folks have commented that they've found this useful for experimentation, but nothing has come of those experiments. Given how easy the patch is to apply, there's no reason to leave the code in tree.
For anyone interested in further investigation in this area, I recommend finding the summary email I sent on one of the original review threads. In particular, I now believe the use-list based approach is strictly worse than the dom-tree-walking approach.
llvm-svn: 262646
Given that we're not actually reducing the instruction count in the included
regression tests, I think we would call this a canonicalization step.
The motivation comes from the example in PR26702:
https://llvm.org/bugs/show_bug.cgi?id=26702
If we hoist the bitwise logic ahead of the bitcast, the previously unoptimizable
example of:
define <4 x i32> @is_negative(<4 x i32> %x) {
%lobit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31>
%not = xor <4 x i32> %lobit, <i32 -1, i32 -1, i32 -1, i32 -1>
%bc = bitcast <4 x i32> %not to <2 x i64>
%notnot = xor <2 x i64> %bc, <i64 -1, i64 -1>
%bc2 = bitcast <2 x i64> %notnot to <4 x i32>
ret <4 x i32> %bc2
}
Simplifies to the expected:
define <4 x i32> @is_negative(<4 x i32> %x) {
%lobit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31>
ret <4 x i32> %lobit
}
Differential Revision: http://reviews.llvm.org/D17583
llvm-svn: 262645
After r262438 we can have provably positive NSW SCEV expressions whose
zero extensions cannot be simplified (since r262438 makes SCEV better at
computing constant ranges). This means demoting sexts of positive add
recurrences eagerly can result in an unsimplified zero extension where
we could have had a simplified sign extension. This change fixes the
issue by teaching SCEV to demote sext of a positive SCEV expression to a
zext only if the sext could not be simplified.
llvm-svn: 262638
This patch provides the following infrastructure for PGO enhancements in inliner:
Enable the use of block level profile information in inliner
Incremental update of block frequency information during inlining
Update the function entry counts of callees when they get inlined into callers.
Differential Revision: http://reviews.llvm.org/D16381
llvm-svn: 262636
The variable mask form of VPERMILPD/VPERMILPS were only partially implemented, with much of it still performed as an intrinsic.
This patch properly defines the instructions in terms of X86ISD::VPERMILPV, permitting the opcode to be easily combined as a target shuffle.
Differential Revision: http://reviews.llvm.org/D17681
llvm-svn: 262635
Summary: With discriminator, LineLocation can uniquely identify a callsite without the need to specifying callee name. Remove Callee function name from the key, and put it in the value (FunctionSamples).
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17827
llvm-svn: 262634
Fixed the ordering to check first for X86 interrupt handler then for MCU target.
Differential Revision: http://reviews.llvm.org/D17801
llvm-svn: 262628
That's not the case for VPERMV/VPERMV3, which cover all possible
combinations (the C intrinsics use a different order; the AVX vs
AVX512 intrinsics are different still).
Since:
r246981 AVX-512: Lowering for 512-bit vector shuffles.
VPERMV is recognized in getTargetShuffleMask.
This breaks assumptions in most callers, as they expect
the non-mask operands to start at index 0.
VPERMV has the mask as operand #0; VPERMV3 has it in the middle.
Instead of the faulty assumption, have getTargetShuffleMask return
its operands as well.
One alternative we considered was to change the operand order of
VPERMV, but we agreed to stick to the instruction order, as there
are more AVX512 weirdness to cover (vpermt2/vpermi2 in particular).
Differential Revision: http://reviews.llvm.org/D17041
llvm-svn: 262627
The vectorization of first-order recurrences (r261346) caused PR26734. When
detecting these recurrences, we need to ensure that the previous value is
actually defined inside the loop. This patch includes the fix and test case.
llvm-svn: 262624
Summary: Adds the 'avr_intrcc' and 'avr_signalcc' IR calling convention tokens to the parser.
Reviewers: arsenm
Subscribers: dylanmckay, llvm-commits
Differential Revision: http://reviews.llvm.org/D16348
llvm-svn: 262600
Generalise the existing SIGN_EXTEND to SIGN_EXTEND_VECTOR_INREG combine to support zero extension as well and get rid of a lot of unnecessary ANY_EXTEND + mask patterns.
Differential Revision: http://reviews.llvm.org/D17691
llvm-svn: 262599
Summary:
Removing MMOs is not our prefer behavior any more.
Reviewers: mcrosier, reames
Differential Revision: http://reviews.llvm.org/D17668
llvm-svn: 262580
Patch by: Konstantin Zhuravlyov
Summary: Tools, such as debugger, need to pause execution based on user input (i.e. breakpoint). In order to do this, two S_NOP instructions are inserted for each high level source statement: one before first isa instruction of high level source statement, and one after last isa instruction of high level source statement. Further, debugger may replace S_NOP instructions with S_TRAP instructions based on user input.
Reviewers: tstellarAMD, arsenm
Subscribers: echristo, dblaikie, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17454
llvm-svn: 262579
Summary:
When there were no free SGPRs, we were trying to move this value into
some of the reserved registers which was causing a segmentation fault.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17590
llvm-svn: 262577
The code was previously not able to track a boolean argument
at a call site back to the formal argument of the caller.
Differential Revision: http://reviews.llvm.org/D17786
llvm-svn: 262575
If we have a loop with a rarely taken path, we will prune that from the blocks which get added as part of the loop chain. The problem is that we weren't then recognizing the loop chain as schedulable when considering the preheader when forming the function chain. We'd then fall to various non-predecessors before finally scheduling the loop chain (as if the CFG was unnatural.) The net result was that there could be lots of garbage between a loop preheader and the loop, even though we could have directly fallen into the loop. It also meant we separated hot code with regions of colder code.
The particular reason for the rejection of the loop chain was that we were scanning predecessor of the header, seeing the backedge, believing that was a globally more important predecessor (true), but forgetting to account for the fact the backedge precessor was already part of the existing loop chain (oops!.
Differential Revision: http://reviews.llvm.org/D17830
llvm-svn: 262547
Catch objects with a displacement of zero do not initialize a catch
object. The displacement is relative to %rsp at the end of the
function's prologue for x86_64 targets.
If we place an object at the top-of-stack, we will end up wit a
displacement of zero resulting in our catch object remaining
uninitialized.
Address this by creating our catch objects as fixed objects. We will
ensure that the UnwindHelp object is created after the catch objects so
that no catch object will have a displacement of zero.
Differential Revision: http://reviews.llvm.org/D17823
llvm-svn: 262546
Summary: This is the last step toward supporting aggregate memory access in instcombine. This explodes stores of arrays into a serie of stores for each element, allowing them to be optimized.
Reviewers: joker.eph, reames, hfinkel, majnemer, mgrang
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17828
llvm-svn: 262530
Summary: This is another step toward improving fca support. This unpack load of array in a series of load to array's elements.
Reviewers: chandlerc, joker.eph, majnemer, reames, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15890
llvm-svn: 262521
When div+rem calls on the same arguments are found, the ARM back-end merges the
two calls into one __aeabi_divmod call for up to 32-bits values. However,
for 64-bit values, which also have a lib call (__aeabi_ldivmod), it wasn't
merging the calls, and thus calling ldivmod twice and spilling the temporary
results, which generated pretty bad code.
This patch legalises 64-bit lib calls for divmod, so that now all the spilling
and the second call are gone. It also relaxes the DivRem combiner a bit on the
legal type check, since it was already checking for isLegalOrCustom on every
value, so the extra check for isTypeLegal was redundant.
This patch fixes PR17193 (and a long time FIXME in the tests).
llvm-svn: 262507
This reverts commit r262370.
It turns out there is code out there that does sequences of allocas
greater than 4K: http://crbug.com/591404
The goal of this change was to improve the code size of inalloca call
sequences, but we got tangled up in the mess of dynamic allocas.
Instead, we should come back later with a separate MI pass that uses
dominance to optimize the full sequence. This should also be able to
remove the often unneeded stacksave/stackrestore pairs around the call.
llvm-svn: 262505
Most of the time ARM has the CCR.UNALIGN_TRP bit set to false which
means that unaligned loads/stores do not trap and even extensive testing
will not catch these bugs. However the multi/double variants are not
affected by this bit and will still trap. In effect a more aggressive
load/store optimization will break existing (bad) code.
These bugs do not necessarily manifest in the broken code where the
misaligned pointer is formed but often later in perfectly legal code
where it is accessed. This means recompiling system libraries (which
have no alignment bugs) with a newer compiler will break existing
applications (with alignment bugs) that worked before.
So (under protest) I implemented this safe mode which limits the
formation of multi/double operations to cases that are not affected by
user code (stack operations like spills/reloads) or cases where the
normal operations trap anyway (floating point load/stores). It is
disabled by default.
Differential Revision: http://reviews.llvm.org/D17015
llvm-svn: 262504
The placement new calls here were all calling the allocation function
in RecyclingAllocator/Recycler for SDNode, instead of the function for
the specific subclass we were constructing.
Since this particular allocator always overallocates it more or less
worked, but would hide what we're actually doing from any memory
tools. Also, if you tried to change this allocator so something like a
BumpPtrAllocator or MallocAllocator, the compiler would crash horribly
all the time.
Part of llvm.org/PR26808.
llvm-svn: 262500
Summary:
This change enables frame pointer elimination in non-leaf functions.
The -fomit-frame-pointer option still needs to be used when compiling
via clang (or an equivalent method of not setting the
'no-frame-pointer-elim*' function attributes if generating llvm IR via
some other method) to take advantage of this optimization.
This change should be NFC when compiling via clang without
-fomit-frame-pointer.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, tberghammer, qcolombet, llvm-commits, danalbert, mcrosier, srhines
Differential Revision: http://reviews.llvm.org/D17730
llvm-svn: 262495
parts of the AA interface out of the base class of every single AA
result object.
Because this logic reformulates the query in terms of some other aspect
of the API, it would easily cause O(n^2) query patterns in alias
analysis. These could in turn be magnified further based on the number
of call arguments, and then further based on the number of AA queries
made for a particular call. This ended up causing problems for Rust that
were actually noticable enough to get a bug (PR26564) and probably other
places as well.
When originally re-working the AA infrastructure, the desire was to
regularize the pattern of refinement without losing any generality.
While I think it was successful, that is clearly proving to be too
costly. And the cost is needless: we gain no actual improvement for this
generality of making a direct query to tbaa actually be able to
re-use some other alias analysis's refinement logic for one of the other
APIs, or some such. In short, this is entirely wasted work.
To the extent possible, delegation to other API surfaces should be done
at the aggregation layer so that we can avoid re-walking the
aggregation. In fact, this significantly simplifies the logic as we no
longer need to smuggle the aggregation layer into each alias analysis
(or the TargetLibraryInfo into each alias analysis just so we can form
argument memory locations!).
However, we also have some delegation logic inside of BasicAA and some
of it even makes sense. When the delegation logic is baking in specific
knowledge of aliasing properties of the LLVM IR, as opposed to simply
reformulating the query to utilize a different alias analysis interface
entry point, it makes a lot of sense to restrict that logic to
a different layer such as BasicAA. So one aspect of the delegation that
was in every AA base class is that when we don't have operand bundles,
we re-use function AA results as a fallback for callsite alias results.
This relies on the IR properties of calls and functions w.r.t. aliasing,
and so seems a better fit to BasicAA. I've lifted the logic up to that
point where it seems to be a natural fit. This still does a bit of
redundant work (we query function attributes twice, once via the
callsite and once via the function AA query) but it is *exactly* twice
here, no more.
The end result is that all of the delegation logic is hoisted out of the
base class and into either the aggregation layer when it is a pure
retargeting to a different API surface, or into BasicAA when it relies
on the IR's aliasing properties. This should fix the quadratic query
pattern reported in PR26564, although I don't have a stand-alone test
case to reproduce it.
It also seems general goodness. Now the numerous AAs that don't need
target library info don't carry it around and depend on it. I think
I can even rip out the general access to the aggregation layer and only
expose that in BasicAA as it is the only place where we re-query in that
manner.
However, this is a non-trivial change to the AA infrastructure so I want
to get some additional eyes on this before it lands. Sadly, it can't
wait long because we should really cherry pick this into 3.8 if we're
going to go this route.
Differential Revision: http://reviews.llvm.org/D17329
llvm-svn: 262490
We have a number of useful lowering strategies for VBROADCAST instructions (both from memory and register element 0) which the 128-bit form of the MOVDDUP instruction can make use of.
This patch tweaks lowerVectorShuffleAsBroadcast to enable it to broadcast 2f64 args using MOVDDUP as well.
It does require a slight tweak to the lowerVectorShuffleAsBroadcast mechanism as the existing MOVDDUP lowering uses isShuffleEquivalent which can match binary shuffles that can lower to (unary) broadcasts.
Differential Revision: http://reviews.llvm.org/D17680
llvm-svn: 262478
This is going to be used in .hsatext disassembler and can be used
in current assembler parser (lit tests passed on parsing).
Code using this helpers isn't included in this patch.
Benefits:
unified approach
fast field name lookup on parsing
Later I would like to enhance some of the field naming/syntax using this code.
Patch by: Valery Pykhtin
Differential Revision: http://reviews.llvm.org/D17150
llvm-svn: 262473
We modeled the RDFLAGS{32,64} operations as "using" {E,R}FLAGS.
While technically correct, this is not be desirable for folks who want
to examine aspects of the FLAGS register which are not related to
computation like whether or not CPUID is a valid instruction.
Differential Revision: http://reviews.llvm.org/D17782
llvm-svn: 262465
For some instructions the register is not the last operand and the immediate handling had to detect this and hardcode the index to find it. It also required CurOp to be pointing at the last operand handled in the Form switch whereas for any instruction it would be pointing at the next operand.
Now we just capture the value in the Form switch when we know exactly where it is and the CurOp pointer can behave normally.
llvm-svn: 262462
Fix checking the same instruction twice instead of the
second branch that uses vccz. I don't think this matters
currently because s_branch_vccnz is always used currently.
llvm-svn: 262457
For some reason MSVC seems to think I'm calling getConstant() from a
static context. Try to avoid this issue by explicitly specifying
'this->' (though I'm not confident that this will actually work).
llvm-svn: 262451
Have ScalarEvolution::getRange re-consider cases like "{C?A:B,+,C?P:Q}"
by factoring out "C" and computing RangeOf{A,+,P} union RangeOf({B,+,Q})
instead.
The latter can be easier to compute precisely in cases like
"{C?0:N,+,C?1:-1}" N is the backedge taken count of the loop; since in
such cases the latter form simplifies to [0,N+1) union [0,N+1).
llvm-svn: 262438
As noted in the code comment, I don't think we can do the same transform that we do for
*scalar* integers comparisons to *vector* integers comparisons because it might pessimize
the general case.
Exhibit A for an incomplete integer comparison ISA remains x86 SSE/AVX: it only has EQ and GT
for integer vectors.
But we should now recognize all the variants of this construct and produce the optimal code
for the cases shown in:
https://llvm.org/bugs/show_bug.cgi?id=26701
llvm-svn: 262424
Summary: SampleProfile pass needs to be performed after InstructionCombiningPass, which helps eliminate un-inlinable function calls.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17742
llvm-svn: 262419
On AMDGPU where operations i64 operations are often bitcasted to v2i32
and back, this pattern shows up regularly where it breaks some
expected combines on i64, such as load width reducing.
This fixes some test failures in a future commit when i64 loads
are changed to promote.
llvm-svn: 262397
This adds some missing generic schedule info definitions, enables
completeness checking for cyclone and fixes a typo uncovered by that.
Differential Revision: http://reviews.llvm.org/D17748
llvm-svn: 262393
This isn't quite NFC because some of the SDLocs may change which could
cause scheduling differences. But no regression tests are affected and
there is no functional change intended.
llvm-svn: 262391
Revert r262248 in an attempt to fix the clang-native-aarch64-full
bot and to investigate a performance regression in
SingleSource/Benchmarks/CoyoteBench/huffbench
llvm-svn: 262388
This reverts commit r262316.
It seems that my change breaks an out-of-tree chromium buildbot, so
I'm reverting this in order to investigate the situation further.
llvm-svn: 262387
TableGen checks at compiletime that for scheduling models with
"CompleteModel = 1" one of the following holds:
- Is marked with the hasNoSchedulingInfo flag
- The instruction is a subclass of Sched
- There are InstRW definitions in the scheduling model
Typical steps necessary to complete a model:
- Ensure all pseudo instructions that are expanded before machine
scheduling (usually everything handled with EmitYYY() functions in
XXXTargetLowering).
- If a CPU does not support some instructions mark the corresponding
resource unsupported: "WriteRes<WriteXXX, []> { let Unsupported = 1; }".
- Add missing scheduling information.
Differential Revision: http://reviews.llvm.org/D17747
llvm-svn: 262384
Summary:
Tablegen was unable to determine that param loads/stores were actually
reading or writing from memory. I think this isn't a problem in
practice for param stores, because those occur in a block right before
we make our call. But param loads don't have to at the very beginning
of a function, so should be annotated as mayLoad so we don't incorrectly
optimize them.
Reviewers: jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D17471
llvm-svn: 262381
Summary: Looks like this was caused by a typo.
Reviewers: jholewinski
Subscribers: jholewinski, llvm-commits, tra
Differential Revision: http://reviews.llvm.org/D17357
llvm-svn: 262380
Summary:
Calls sometimes need to be convergent. This is already handled at the
LLVM IR level, but it also needs to be handled at the MI level.
Ideally we'd propagate convergence from instructions, down through the
selection DAG, and into MIs. But this is Hard, and would affect
optimizations in the SDNs -- right now only SDNs with two operands have
any flags at all.
Instead, here's a much simpler hack: Add new opcodes for NVPTX for
convergent calls, and generate these when lowering convergent LLVM
calls.
Reviewers: jholewinski
Subscribers: jholewinski, chandlerc, joker.eph, jhen, tra, llvm-commits
Differential Revision: http://reviews.llvm.org/D17423
llvm-svn: 262373
Summary:
Also simplify some of the embedded C++ logic.
No functional changes.
Reviewers: jholewinski
Subscribers: llvm-commits, tra, jholewinski
Differential Revision: http://reviews.llvm.org/D17354
llvm-svn: 262371
The _chkstk function is called by the compiler to probe the stack in an
order consistent with Windows' expectations. However, it is possible to
elide the call to _chkstk and manually adjust the stack pointer if we
can prove that the allocation is fixed size and smaller than the probe
size.
This shrinks chrome.dll, chrome_child.dll and chrome.exe by a
cummulative ~133 KB.
Differential Revision: http://reviews.llvm.org/D17679
llvm-svn: 262370
Summary:
This adds the beginning of an update API to preserve MemorySSA. In particular,
this patch adds a way to remove memory SSA accesses when instructions are
deleted.
It also adds relevant unit testing infrastructure for MemorySSA's API.
(There is an actual user of this API, i will make that diff dependent on this one. In practice, a ton of opt passes remove memory instructions, so it's hopefully an obviously useful API :P)
Reviewers: hfinkel, reames, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17157
llvm-svn: 262362
CIE augmentation data might contain non-printable characters.
The patch prints the data as a list of hex bytes.
Differential Revision: http://reviews.llvm.org/D17759
llvm-svn: 262361
This adds support to convert ProfileSummary object to Metadata and create a
ProfileSummary object from metadata. This would allow attaching profile summary
information to Module allowing optimization passes to use it.
llvm-svn: 262360
Summary:
This patch impleemnts DS_PERMUTE/DS_BPERMUTE instruction definitions and intrinsics,
which are new since VI.
Reviewers: tstellarAMD, arsenm
Subscribers: llvm-commits, arsenm
Differential Revision: http://reviews.llvm.org/D17614
llvm-svn: 262356
In the code below on 32-bit targets, x would previously get forwarded to g()
without sign-extension to 32 bits as required by the parameter attribute.
void g(signed short);
void f(unsigned short x) {
g(x);
}
llvm-svn: 262352
This patch fixes calculating correct value for builtin_object_size function
when pointer is used only in builtin_object_size function call and never
after that.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D17337
llvm-svn: 262337
Idea behind this change is to make code shorter and as much common for all targets as possible. Let's even accept more code than is valid for a particular target, leaving it for the assembler to sort out.
64bit instructions decoding added.
Error\warning messages on unrecognized instructions operands added, InstPrinter allowed to print invalid operands helping to find invalid/unsupported code.
The change is massive and hard to compare with previous version, so it makes sense just to take a look on the new version. As a bonus, with a few TD changes following, it disassembles the majority of instructions. Currently it fully disassembles >300K binary source of some blas kernel.
Previous TODOs were saved whenever possible.
Patch by: Valery Pykhtin
Differential Revision: http://reviews.llvm.org/D17720
llvm-svn: 262332
Function lto_module_create_in_local_context() would previously
rely on the default LLVMContext being created for it by
LTOModule::makeLTOModule(). This context exits the program on
error and is not arranged to update sLastStringError in
tools/lto/lto.cpp.
Function lto_module_create_in_local_context() now creates an
LLVMContext by itself, sets it up correctly to its needs and then
passes it to LTOModule::createInLocalContext() which takes
ownership of the context and keeps it present for the lifetime of
the returned LTOModule.
Function LTOModule::makeLTOModule() is modified to take a
reference to LLVMContext (instead of a pointer) and no longer
creates a default context when nullptr is passed to it. Method
LTOModule::createInContext() that takes a pointer to LLVMContext
is removed because it allows to pass a nullptr to it. Instead
LTOModule::createFromBuffer() (that takes a reference to
LLVMContext) should be used.
Differential Revision: http://reviews.llvm.org/D17715
llvm-svn: 262330
Summary:
This patch modifies the existing comparison, branch, conditional-move
and select patterns, and adds new ones where needed. Also, the updated
SLT{u,i,iu} set of instructions generate a GPR width result.
The majority of the code changes in the Mips back-end fix the wrong
assumption that the result of SETCC nodes always produce an i32 value.
The changes in the common code path account for the fact that in 64-bit
MIPS targets, i1 is promoted to i32 instead of i64.
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D10970
llvm-svn: 262316
Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
llvm-svn: 262314
Technically you aren't supposed to emit these after type legalization
for some reason, and we use vector extracts of bitcasted integers
as the canonical way to do this.
llvm-svn: 262298
This currently does not have the control over the bitwidth,
and there are missing optimizations to reduce the integer to
32-bit if it can be.
But in most situations we do want the sinking to occur.
llvm-svn: 262296
The CatchObjOffset is relative to the end of the EH registration node
for 32-bit x86 WinEH targets. A special sentinel value, 0, is used to
indicate that no catch object should be initialized.
This means that a catch object allocated immediately before the
registration node would be assigned a CatchObjOffset of 0, leading the
runtime to believe that a catch object should not be initialized.
To handle this, allocate the registration node prior to any other frame
object. This will ensure that catch objects will not be allocated
before the registration node.
This fixes PR26757.
Differential Revision: http://reviews.llvm.org/D17689
llvm-svn: 262294
Generally speaking, this can only happen with unreachable code.
However, neglecting to check for this condition would lead us to loop
forever.
llvm-svn: 262284
The intended effect of this patch in conjunction with:
http://reviews.llvm.org/rL259392http://reviews.llvm.org/rL260145
is that customers using the AVX intrinsics in C will benefit from combines when
the load mask is constant:
__m128 mload_zeros(float *f) {
return _mm_maskload_ps(f, _mm_set1_epi32(0));
}
__m128 mload_fakeones(float *f) {
return _mm_maskload_ps(f, _mm_set1_epi32(1));
}
__m128 mload_ones(float *f) {
return _mm_maskload_ps(f, _mm_set1_epi32(0x80000000));
}
__m128 mload_oneset(float *f) {
return _mm_maskload_ps(f, _mm_set_epi32(0x80000000, 0, 0, 0));
}
...so none of the above will actually generate a masked load for optimized code.
This is the masked load counterpart to:
http://reviews.llvm.org/rL262064
llvm-svn: 262269
Summary:
I re-benchmarked this and results are similar to original results in
D13259:
On ARM64:
SingleSource/Benchmarks/Polybench/linear-algebra/solvers/dynprog -59.27%
SingleSource/Benchmarks/Polybench/stencils/adi -19.78%
On x86:
SingleSource/Benchmarks/Polybench/linear-algebra/solvers/dynprog -27.14%
And of course the original ~20% gain on SPECint_2006/456.hmmer with Loop
Distribution.
In terms of compile time, there is ~5% increase on both
SingleSource/Benchmarks/Misc/oourafft and
SingleSource/Benchmarks/Linkpack/linkpack-pc. These are both very tiny
loop-intensive programs where SCEV computations dominates compile time.
The reason that time spent in SCEV increases has to do with the design
of the old pass manager. If a transform pass does not preserve an
analysis we *invalidate* the analysis even if there was *no*
modification made by the transform pass.
This means that currently we don't take advantage of LLE and LV sharing
the same analysis (LAA) and unfortunately we recompute LAA *and* SCEV
for LLE.
(There should be a way to work around this limitation in the case of
SCEV and LAA since both compute things on demand and internally cache
their result. Thus we could pretend that transform passes preserve
these analyses and manually invalidate them upon actual modification.
On the other hand the new pass manager is supposed to solve so I am not
sure if this is worthwhile.)
Reviewers: hfinkel, dberlin
Subscribers: dberlin, reames, mssimpso, aemerson, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16300
llvm-svn: 262250
When a variable is described by a single DBG_VALUE instruction we can
often use a more efficient inline DW_AT_location instead of using a
location list.
This commit makes the heuristic that decides when to apply this
optimization stricter by also verifying that the DBG_VALUE is live at the
entry of the function (instead of just checking that it is valid until
the end of the function).
<rdar://problem/24611008>
llvm-svn: 262247
Summary:
Rename the section embeds bitcode from ".llvmbc,.llvmbc" to "__LLVM,__bitcode".
The new name matches MachO section naming convention.
Reviewers: rafael, pcc
Subscribers: davide, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D17388
llvm-svn: 262245
This is long-standing dirtiness, as acknowledged by r77582:
The current trick is to select it into a merge_values with
the first definition being an implicit_def. The proper solution is
to add new ISD opcodes for the no-output variant.
Doing this before selection will let us combine away some constructs.
Differential Revision: http://reviews.llvm.org/D17659
llvm-svn: 262244
32-bit X86 EH on Windows utilizes a stack of registration nodes
allocated and deallocated on entry/exit. A registration node contains a
bunch of EH personality specific information like which try-state we are
currently in.
Because a setjmp target allows control flow from arbitrary program
points, there is no way to ensure that the try-state we are in is
correctly updated once we transfer control.
MSVC compatible compilers, like MSVC and ICC, utilize runtime helpers to
reinitialize the try-state when a longjmp occurs. This is implemented
by adding additional arguments to _setjmp3: the desired try-state and
a helper routine to update the try-state.
Differential Revision: http://reviews.llvm.org/D17721
llvm-svn: 262241
Corresponds to Phabricator review:
http://reviews.llvm.org/D16592
This fix includes both an update to how we handle the "generic" CPU on LE
systems as well as Anton's fix for the Fast Isel issue.
llvm-svn: 262233
Summary:
The bug was that dextu's operand 3 would print 0-31 instead of 32-63 when
printing assembly. This came up when replacing
MipsInstPrinter::printUnsignedImm() with a version that could handle arbitrary
bit widths.
MipsAsmPrinter::printUnsignedImm*() don't seem to be used so they have been
removed.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15521
llvm-svn: 262231
Summary:
Previously, it would always select DEXT and substitute any invalid matches
for DEXTU/DEXTM during MipsMCCodeEmitter::encodeInstruction(). This works
but causes problems when adding range checked immediates to IAS.
Now isel selects the correct variant up front.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16810
llvm-svn: 262229
in the PassBuilder.
These are really just stubs for now, but they give a nice API surface
that Clang or other tools can start learning about and enabling for
experimentation.
I've also wired up parsing various synthetic module pass names to
generate these set pipelines. This allows the pipelines to be combined
with other passes and have their order controlled, with clear separation
between the *kind* of canned pipeline, and the *level* of optimization
to be used within that canned pipeline.
The most interesting part of this patch is almost certainly the spec for
the different optimization levels. I don't think we can ever have hard
and fast rules that would make it easy to determine whether a particular
optimization makes sense at a particular level -- it will always be in
large part a judgement call. But hopefully this will outline the
expected rationale that should be used, and the direction that the
pipelines should be taken. Much of this was based on a long llvm-dev
discussion I started years ago to try and crystalize the intent behind
these pipelines, and now, at long long last I'm returning to the task of
actually writing it down somewhere that we can cite and try to be
consistent with.
Differential Revision: http://reviews.llvm.org/D12826
llvm-svn: 262196
The maximum private allocation for the whole GPU is 4G,
so the maximum possible index for a single workitem is the
maximum size divided by the smallest granularity for a dispatch.
This increases the number of known zero high bits, which
enables more offset folding. The maximum private size per
workitem with this is 128M but may be smaller still.
llvm-svn: 262153
InlineSpiller::rematerializeFor() never uses its parameter as an
iterator, so take it by reference instead. This removes an implicit
conversion from MachineBasicBlock::iterator to MachineInstr*.
llvm-svn: 262152
Change MachineInstr API to prefer MachineInstr& over MachineInstr*
whenever the parameter is expected to be non-null. Slowly inching
toward being able to fix PR26753.
llvm-svn: 262149
In the case where op = add, y = base_ptr, and x = offset, this
transform:
(op y, (op x, c1)) -> (op (op x, y), c1)
breaks the canonical form of add by putting the base pointer in the
second operand and the offset in the first.
This fix is important for the R600 target, because for some address
spaces the base pointer and the offset are stored in separate register
classes. The old pattern caused the ISel code for matching addressing
modes to put the base pointer and offset in the wrong register classes,
which required no-trivial code transformations to fix.
llvm-svn: 262148
Take parameters as MachineInstr& instead of MachineInstr* in
AntiDepBreaker API, since these are required to be non-null. No
functionality change intended. Looking toward PR26753.
llvm-svn: 262145
In all but one case, change the DFAPacketizer API to take MachineInstr&
instead of MachineInstr*. In DFAPacketizer::endPacket(), take
MachineBasicBlock::iterator. Besides cleaning up the API, this is in
search of PR26753.
llvm-svn: 262142
Update APIs in MachineInstrBundle.h to take and return MachineInstr&
instead of MachineInstr* when the instruction cannot be null. Besides
being a nice cleanup, this is tacking toward a fix for PR26753.
llvm-svn: 262141
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
llvm-svn: 262133
manager proxies and use those rather than repeating their definition
four times.
There are real differences between the two directions: outer AMs are
const and don't need to have invalidation tracked. But every proxy in
a particular direction is identical except for the analysis manager type
and the IR unit they proxy into. This makes them prime candidates for
nice templates.
I've started introducing explicit template instantiation declarations
and definitions as well because we really shouldn't be emitting all this
everywhere. I'm going to go back and add the same for the other
templates like this in a follow-up patch.
I've left the analysis manager as an opaque type rather than using two
IR units and requiring it to be an AnalysisManager template
specialization. I think its important that users retain the ability to
provide their own custom analysis management layer and provided it has
the appropriate API everything should Just Work.
llvm-svn: 262127
This matches the behavior of the HSAIL clock instruction.
s_realmemtime is used if the subtarget supports it, and falls
back to s_memtime if not.
Also introduces new intrinsics for each of s_memtime / s_memrealtime.
llvm-svn: 262119
Take MachineInstr by reference instead of by pointer in SlotIndexes and
the SlotIndex wrappers in LiveIntervals. The MachineInstrs here are
never null, so this cleans up the API a bit. It also incidentally
removes a few implicit conversions from MachineInstrBundleIterator to
MachineInstr* (see PR26753).
At a couple of call sites it was convenient to convert to a range-based
for loop over MachineBasicBlock::instr_begin/instr_end, so I added
MachineBasicBlock::instrs.
llvm-svn: 262115
Summary:
The PS4 linker seems to handle this fine.
Hi David, it seems that indeed most ELF linkers support
__{start,stop}_SECNAME, as our proprietary linker does as well.
This follows the pattern of r250679 w.r.t. the testing.
Maggie, Phillip, Paul: I've tested this with the PS4 SDK 3.5 toolchain
prerelease and it seems to work fine.
Reviewers: davidxl
Subscribers: probinson, phillip.power, MaggieYi
Differential Revision: http://reviews.llvm.org/D17672
llvm-svn: 262112
merged into a loop that was subsequently unrolled (or otherwise nuked).
In this case it can't merge in the ASTs for any remaining nested loops,
it needs to re-add their instructions dircetly.
The fix is very isolated, but I've pulled the code for merging blocks
into the AST into a single place in the process. The only behavior
change is in the case which would have crashed before.
This fixes a crash reported by Mikael Holmen on the list after r261316
restored much of the loop pass pipelining and allowed us to actually do
this kind of nested transformation sequenc. I've taken that test case
and further reduced it into the somewhat twisty maze of loops in the
included test case. This does in fact trigger the bug even in this
reduced form.
llvm-svn: 262108
Summary:
Without tree pruning clang has 2,667,552 points.
Wiht only dominators pruning: 1,515,586.
With both dominators & predominators pruning: 1,340,534.
Differential Revision: http://reviews.llvm.org/D17671
llvm-svn: 262103
Most of this is fairly straight forward. Add handling for min/max via existing matcher utility and ConstantRange routines. Add handling for clamp by exploiting condition constraints on inputs.
Note that I'm only handling two constant ranges at this point. It would be reasonable to consider treating overdefined as a full range if the instruction is typed as an integer, but that should be a separate change.
Differential Revision: http://reviews.llvm.org/D17184
llvm-svn: 262085
Currently we always expand ISD::FNEG. For v4f32 and v2f64 vector types VSX has
native support for this opcode
Phabricator: http://reviews.llvm.org/D17647
llvm-svn: 262079
The intended effect of this patch in conjunction with:
http://reviews.llvm.org/rL259392http://reviews.llvm.org/rL260145
is that customers using the AVX intrinsics in C will benefit from combines when
the store mask is constant:
void mstore_zero_mask(float *f, __m128 v) {
_mm_maskstore_ps(f, _mm_set1_epi32(0), v);
}
void mstore_fake_ones_mask(float *f, __m128 v) {
_mm_maskstore_ps(f, _mm_set1_epi32(1), v);
}
void mstore_ones_mask(float *f, __m128 v) {
_mm_maskstore_ps(f, _mm_set1_epi32(0x80000000), v);
}
void mstore_one_set_elt_mask(float *f, __m128 v) {
_mm_maskstore_ps(f, _mm_set_epi32(0x80000000, 0, 0, 0), v);
}
...so none of the above will actually generate a masked store for optimized code.
Differential Revision: http://reviews.llvm.org/D17485
llvm-svn: 262064
Summary: This is extracted from D17555
Reviewers: davidxl, reames, sanjoy, MatzeB, pete
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17580
llvm-svn: 262058
This should save a pointer of padding from all MSVC Value subclasses.
Recall that MSVC will not pack the following bitfields together:
unsigned Bits : 29;
unsigned Flag1 : 1;
unsigned Flag2 : 1;
unsigned Flag3 : 1;
Add a static_assert because LLVM developers always trip over this
behavior. This regressed in June.
llvm-svn: 262045
This patch updates cmake build scripts to build on Haiku. It adds Haiku x86_64 to config.guess.
Please consider reviewing.
Pathc by Jérôme Duval.
llvm-svn: 262038
This is one of the cases shown in:
https://llvm.org/bugs/show_bug.cgi?id=26701
Shift and negate is what InstCombine appears to prefer, so I've started with that pattern.
Note that the 'pcmpeq' instructions are always generating the negative one for the actual
'pcmpgt' comparison in each case (side note: why isn't there an alias mnemonic for that?).
Differential Revision: http://reviews.llvm.org/D17630
llvm-svn: 262036
MBB slot index intervals are half open, not closed. getMBBEndIndex()
returns the slot index of the start of the next block in layout order.
Placing a register mask there is incorrect if the successor of the
funclet return is not laid out after the return. Clang generates IR for
catch bodies before generating the following normal code, so we never
noticed this issue until the D frontend authors filed a bug about it.
Instead, we can put the clobber mask on the last instruction of the
funclet return block. We still aren't using a register mask operand on
the CATCHRET instruction because it would cause PEI to spill all CSRs,
including XMM regs, in the prologue.
Fixes PR26679.
llvm-svn: 262035
classes changed whether the decltype of these expressions was
a reference. I'm somewhat horrified why, and there may need to be
a deeper fix on MSVC, but this should at least get the bots a step
further.
llvm-svn: 262008
analyses in the new pass manager.
These just handle really basic stuff: turning a type name into a string
statically that is nice to print in logs, and getting a static unique ID
for each analysis.
Sadly, the format of passes in anonymous namespaces makes using their
names in tests really annoying so I've customized the names of the no-op
passes to keep tests sane to read.
This is the first of a few simplifying refactorings for the new pass
manager that should reduce boilerplate and confusion.
llvm-svn: 262004
Add parsing and printing of image operands. Matches legacy sp3 assembler.
Change image instruction order to have data/image/sampler operands in the beginning. This is needed because optional operands in MC are always last.
Update SITargetLowering for new order.
Add basic MC test.
Update CodeGen tests.
Review: http://reviews.llvm.org/D17574
llvm-svn: 261995
Instead of the convoluted if-statment we can just use getColor. This also fixes
a bug where we relied upon the parity of tablegen-generated register indexes
(instead of using the machine encoding).
llvm-svn: 261990
Currently aligned is what is being used so remove the redundant patterns for the unaligned versions. But don't do this for the byte and word vector types since they don't have aligned versions.
llvm-svn: 261985
This also simplifies the code by removing the overly conservative
NoInterveningSideEffect() function. This function checked:
- That the two copies belong to the same block: We only process one
block at a time and clear our maps in between it is impossible to find a
copy from a different block.
- There is no terminator between the two copy instructions: This is not
allowed anyway (the MachineVerifier would complain)
- Does not have instructions with hasUnmodeledSideEffects() or isCall()
set: Even for those instructuction we must have all clobbers/defs of
registers explicit as an operand. If the register is explicitely
clobbered we would never come to the point of checking for
NoInterveningSideEffect() anyway.
(I also checked this with a temporary build of the test-suite with all
potentially failing conditions in NoInterveningSideEffect() turned into
asserts)
Differential Revision: http://reviews.llvm.org/D17474
llvm-svn: 261965
Summary: Check that we're using SCEV for the same loop we're simulating. Otherwise, we might try to use the iteration number of the current loop in SCEV expressions for inner/outer loops IVs, which is clearly incorrect.
Reviewers: chandlerc, hfinkel
Subscribers: sanjoy, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17632
llvm-svn: 261958
Summary:
This is the first simple attempt to reduce number of coverage-
instrumented blocks.
If a basic block dominates all its successors, then its coverage
information is useless to us. Ingore such blocks if
santizer-coverage-prune-tree option is set.
Differential Revision: http://reviews.llvm.org/D17626
llvm-svn: 261949
Inline-asm calls aren't annotated with funclet bundle operands because
they don't throw and cannot be inlined through. We shouldn't require
them to bear an funclet bundle operand.
llvm-svn: 261942
Summary:
Avoid special case for FP, LR CFI emission and just allow general
AArch64FrameLowering::emitCalleeSavedFrameMoves() to handle them. Also,
stop recalculating the stack offsets in emitCalleeSavedFrameMoves()
since we can just reuse the previously calculated offset stored in the
MachineFrameInfo.
Depends on D17000
Reviewers: t.p.northover, rengolin, mcrosier, jmolloy
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17004
llvm-svn: 261885
Support all instructions with VOP1 encoding with 32 or 64-bit operands for VI subtarget:
VGPR_32 and VReg_64 operand register classes
VS_32 and VS_64 operand register classes with inline and literal constants
Tests for VOP1 instructions.
Patch by: skolton
Reviewers: arsenm, tstellarAMD
Review: http://reviews.llvm.org/D17194
llvm-svn: 261878
Resubmit with index problem fixed. Verified with valgrind.
Prepare to support DPP encodings.
For DPP encodings, we want row_mask/bank_mask/bound_ctrl to be optional operands.
However this means that when parsing instruction which has no mnemonic prefix,
we cannot add both default values for VOP3 and for DPP optional operands
to OperandVector - neither instructions would match. So add default values
for optional operands to MCInst during conversion instead.
Mark more operands as IsOptional = 1 in .td files.
Do not add default values for optional operands to OperandVector in AMDGPUAsmParser.
Add default values for optional operands during conversion using new helper addOptionalImmOperand.
Change to cvtVOP3_2_mod to check instruction flag instead of presence of modifiers. In the future, cvtVOP3* functions can be combined into one.
Separate cvtFlat and cvtFlatAtomic.
Fix CNDMASK_B32 definition to have no modifiers.
Review: http://reviews.llvm.org/D17445
llvm-svn: 261856
This creates the new-style LoopPassManager and wires it up with dummy
and print passes.
This version doesn't support modifying the loop nest at all. It will
be far easier to discuss and evaluate the approaches to that with this
in place so that the boilerplate is out of the way.
llvm-svn: 261831
The constant folding for sdiv and udiv has a big discrepancy between the
comments and the code, which looks like a typo. Currently, we're folding
X / undef pretty inconsistently:
0 / undef -> undef
C / undef -> 0
undef / undef -> 0
Whereas the comments state we do X / undef -> undef. The logic that
returns zero is actually commented as doing undef / X -> 0, despite that
the LHS isn't undef in many of the cases that hit it.
llvm-svn: 261813
Summary:
Both the hardware and LLVM have changed since 2012.
Now, load-based heuristic don't show big differences any more on OoO cores.
There is no notable regressons and improvements on spec2000/2006. (Cortex-A57, Core i5).
Reviewers: spatel, zansari
Differential Revision: http://reviews.llvm.org/D16836
llvm-svn: 261809
(This is the second attemp to commit this patch, after fixing pr26652 & pr26653).
This patch detects vector reductions before instruction selection. Vector
reductions are vectorized reduction operations, and for such operations we have
freedom to reorganize the elements of the result as long as the reduction of them
stay unchanged. This will enable some reduction pattern recognition during
instruction combine such as SAD/dot-product on X86. A flag is added to
SDNodeFlags to mark those vector reduction nodes to be checked during instruction
combine.
To detect those vector reductions, we search def-use chains starting from the
given instruction, and check if all uses fall into two categories:
1. Reduction with another vector.
2. Reduction on all elements.
in which 2 is detected by recognizing the pattern that the loop vectorizer
generates to reduce all elements in the vector outside of the loop, which
includes several ShuffleVector and one ExtractElement instructions.
Differential revision: http://reviews.llvm.org/D15250
llvm-svn: 261804
Summary: This is extracted from D17555
Reviewers: davidxl, reames, sanjoy, MatzeB, pete
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17579
llvm-svn: 261796
This fixes bugs in copy elimination code in llvm. It slightly changes the
semantics of clearRegisterKills(). This is appropriate because:
- Users in lib/CodeGen/MachineCopyPropagation.cpp and
lib/Target/AArch64RedundantCopyElimination.cpp and
lib/Target/SystemZ/SystemZElimCompare.cpp are incorrect without it
(see included testcase).
- All other users in llvm are unaffected (they pass TRI==nullptr)
- (Kill flags are optional anyway so removing too many shouldn't hurt.)
Differential Revision: http://reviews.llvm.org/D17554
llvm-svn: 261763
The cleanupret instruction has an invariant that it's 'from' operand be
a cleanuppad. This invariant was violated when we removed a dead block
which removed a cleanuppad leaving behind a cleanupret with an undef
'from' operand.
This was solved in r261731 by staving off the removal of the dead block
to a later pass.
However, it occured to me that we do not need to do this.
Instead, we can simply avoid processing the cleanupret if it has an
undef 'from' operand because we know that it will be removed soon.
llvm-svn: 261754
This is part of the payoff for the refactoring in:
http://reviews.llvm.org/rL261649http://reviews.llvm.org/rL261707
In addition to removing a pile of duplicated code, the xor case was
missing the optimization for vector types because it checked
"SrcTy->isIntegerTy()" rather than "SrcTy->isIntOrIntVectorTy()"
like 'and' and 'or' were already doing.
This solves part of:
https://llvm.org/bugs/show_bug.cgi?id=26702
llvm-svn: 261750
Part 2 of 2
This patch add support for combining target shuffles into blends-with-zero.
Differential Revision: http://reviews.llvm.org/D17483
llvm-svn: 261745
Part 1 of 2
This patch attempts to replace the insertion of zero scalars with a vector blend with zero, avoiding the use of the integer insertion instructions (which are particularly slow on many targets).
(Part 2 will add support for combining multiple blends-with-zero).
Differential Revision: http://reviews.llvm.org/D17483
llvm-svn: 261743
Prepare to support DPP encodings.
For DPP encodings, we want row_mask/bank_mask/bound_ctrl to be optional operands. However this means that when parsing instruction which has no mnemonic prefix, we cannot add both default values for VOP3 and for DPP optional operands to OperandVector - neither instructions would match. So add default values for optional operands to MCInst during conversion instead.
Mark more operands as IsOptional = 1 in .td files.
Do not add default values for optional operands to OperandVector in AMDGPUAsmParser.
Add default values for optional operands during conversion using new helper addOptionalImmOperand.
Change to cvtVOP3_2_mod to check instruction flag instead of presence of modifiers. In the future, cvtVOP3* functions can be combined into one.
Separate cvtFlat and cvtFlatAtomic.
Fix CNDMASK_B32 definition to have no modifiers.
Review: http://reviews.llvm.org/D17445
Reviewers: tstellarAMD
llvm-svn: 261742
This is a part of the refactoring to unify isSafeToLoadUnconditionally and isDereferenceablePointer functions. In subsequent change I'm going to eliminate isDerferenceableAndAlignedPointer from Loads API, leaving isSafeToLoadSpecualtively the only function to check is load instruction can be speculated.
Reviewed By: hfinkel
Differential Revision: http://reviews.llvm.org/D16180
llvm-svn: 261736
lit tests passed before and after because it doesn't test the binary representation of amd_kernel_code_t.
Patch by: Valery Pykhtin (Valery.Pykhtin@amd.com)
Reviewers: arsenm
llvm-svn: 261732
DeleteDeadBlock was called indiscriminately, leading to cleanuprets with
undef cleanuppad references.
Instead, try to drain the BB of most of it's instructions if it is
unreachable. We can then remove the BB if it solely consists of a
terminator (and maybe some phis).
llvm-svn: 261731
PerformShuffleCombine should be usable by unary and binary target shuffles, but was attempting to get the first two operands whatever the instruction type. Since these are only used for VECTOR_SHUFFLE instructions for one particular combine I've moved them inside the relevant if statement.
llvm-svn: 261727
This function is used in exactly one place, and only in asserts
builds. Move it a few lines up before the use and only define it when
asserts are enabled. Fixes the release build under -Werror.
Also remove the forward declaration and commentary that was basically
identical to the code itself.
llvm-svn: 261722
Note: The 'and' case in foldCastedBitwiseLogic() is inheriting one extra
check from the nearly identical 'or' case:
if ((!isa<ICmpInst>(Cast0Src) || !isa<ICmpInst>(Cast1Src))
But I'm not sure how to expose that difference in a regression test.
Without that check, the 'or' path will infinite loop on:
test/Transforms/InstCombine/zext-or-icmp.ll
because the zext-or-icmp fold is attempting a reverse transform.
The refactoring should extend to the 'xor' case next to solve part of
PR26702.
llvm-svn: 261707
Looks like the global rename last year was a bit over-zealous. These things
really are referred to with ARM64 elsewhere (ld64, libunwind, ...).
llvm-svn: 261698
We were emitting only one half of a the paired relocations needed for these
instructions because we decided that an offset needed a scattered relocation.
In fact, movw/movt relocations can be paired without being scattered.
llvm-svn: 261679
Summary:
Currently, the ARM Constant Island may not converge (or not converge quickly).
This patch let it move to the closest water after the user if it doesn't converge after 15 iterations.
This address https://llvm.org/bugs/show_bug.cgi?id=25339
Reviewers: t.p.northover, srhines, kristof.beyls, aadg, rengolin
Subscribers: weimingz, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D16890
llvm-svn: 261665
Implements a mostly-conventional redzone for the userspace
stack. Because we have unsigned load/store offsets we continue to use a
local SP subtracted from the incoming SP but do not write it back to
memory.
Differential Revision: http://reviews.llvm.org/D17525
llvm-svn: 261662
It is problematic if the inlinee has a cleanupret which unwinds to
caller and we inline it into a call site which doesn't unwind.
If the funclet unwinds anywhere other than to the caller,
then we will give the funclet two unwind destinations.
This will result in a verifier failure.
Seeing as how the caller wasn't an invoke (which would locally unwind)
and that the funclet cannot unwind to caller, we must conclude that an
'unwind to caller' cleanupret is dynamically unreachable.
This fixes PR26698.
Differential Revision: http://reviews.llvm.org/D17536
llvm-svn: 261656
Summary:
Fix a bug in epilog generation where the incoming stack arguments were
not being popped for fastcc functions when -tailcallopt was passed.
Reviewers: t.p.northover, mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16894
llvm-svn: 261650
This is a straight cut and paste of the existing code and is intended to
be the first step in solving part of PR26702:
https://llvm.org/bugs/show_bug.cgi?id=26702
We should be able to reuse most of this and delete the nearly identical
existing code in visitOr(). Then, we can enhance visitXor() to use the
same code too.
llvm-svn: 261649
pattern that triggers it. This essentially requires an immutable
function analysis, as that will survive anything we do to invalidate it.
When we have such patterns, the function analysis manager will not get
cleared between runs of the proxy.
If we actually need an assert about how things are queried, we can add
more elaborate machinery for computing it, but so far I'm not aware of
significant value provided.
Thanks to Justin Lebar for noticing this when he made a (seemingly
innocuous) change to FunctionAttrs that is enough to trigger it in one
test there. Now it is covered by a direct test of the pass manager code.
llvm-svn: 261627
Summary:
If we want classify OoO or not, using getSchedModel().isOutOfOrder()
could be more proper way than using Subtarget->isLikeA9().
Reviewers: jmolloy, rengolin
Differential Revision: http://reviews.llvm.org/D17433
llvm-svn: 261623
src1 of s_bfe_u64 is 32-bit (same as s_bfe_i64).
src0 and src1 of s_bfm_b64 are 32-bit.
Update tests.
Review: http://reviews.llvm.org/D17480
Reviewers: arsenm
llvm-svn: 261621
Summary: If a function is hot, put it in text.hot section.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17532
llvm-svn: 261607
Change TargetInstrInfo API to take `MachineInstr&` instead of
`MachineInstr*` in the functions related to predicated instructions
(I'll try to come back later and get some of the rest). All of these
functions require non-null parameters already, so references are more
clear. As a bonus, this happens to factor away a host of implicit
iterator => pointer conversions.
No functionality change intended.
llvm-svn: 261605
Summary:
When we completely unroll a loop, it's pretty easy to update DT in-place and
thus avoid rebuilding it. DT recalculation is one of the most time-consuming
tasks in loop-unroll, so avoiding it at least in case of full unroll should be
beneficial.
On some extreme (but still real-world) tests this patch improves compile time by
~2x.
Reviewers: escha, jmolloy, hfinkel, sanjoy, chandlerc
Subscribers: joker.eph, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D17473
llvm-svn: 261595
These are really handles that ensure the analyses get cleared at
appropriate places, and as such copying doesn't really make sense.
Instead, they should look more like unique ownership objects. Make that
the case.
Relatedly, if you create a temporary of one and move out of it
its destructor shouldn't actually clear anything. I don't think there is
any code that can trigger this currently, but it seems like a more
robust implementation.
If folks want, I can add a unittest that forces this to be exercised,
but that seems somewhat pointless -- whether a temporary is ever created
in the innards of AnalysisManager is not really something we should be
adding a reliance on, but I didn't want to leave a timebomb in the code
here.
If anyone has a cleaner way to represent this, I'm all ears, but
I wanted to assure myself that this wasn't in fact responsible for
another bug I'm chasing down (it wasn't) and figured I'd commit that.
llvm-svn: 261594
Summary: If a function is hot, put it in text.hot section.
Reviewers: davidxl
Subscribers: eraman, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17460
llvm-svn: 261582
This was causing assertions later from using the wrong pointer
size with LDS operations. getOptimalMemOpType should also have
address space arguments later.
This avoids assertions in existing tests exposed by
a future commit.
llvm-svn: 261580
Previously the stack pointer was only written back to memory in the
prolog. But this is wrong for dynamic allocas, for which
target-independent codegen handles SP updates after the prolog (and
possibly even in another BB). Instead update the SP global in
ADJCALLSTACKDOWN which is generated after the SP update sequence.
This will have further refinements when we add red zone support.
llvm-svn: 261579
Summary:
Since this is an IR pass it's nice to be able to write tests without
llc. This is the counterpart of the llc test under
CodeGen/PowerPC/loop-data-prefetch.ll.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17464
llvm-svn: 261578
This is a little embarrassing.
When I reverted r261504 (getIterator() => getInstrIterator()) in
r261567, I did a `git grep` to see if there were new calls to
`getInstrIterator()` that I needed to migrate. There were 10-20 hits,
and I blindly did a `sed ...` before calling `ninja check`.
However, these were `MachineInstrBundleIterator::getInstrIterator()`,
which predated r261567. Perhaps coincidentally, these had an identical
name and return type.
This commit undoes my careless sed and restores
`MachineBasicBlock::iterator::getInstrIterator()`.
llvm-svn: 261577
The issue was that we only required LCSSA rebuilding if the immediate
parent-loop had values used outside of it. The fix is to enaable the
same logic for all outer loops, not only immediate parent.
llvm-svn: 261575
This flag was part of a migration to a new means of handling vectors-of-points which was described in the llvm-dev thread "FYI: Relocating vector of pointers". The old code path has been off by default for a while without complaints, so time to cleanup.
llvm-svn: 261569
DMB instructions can be expensive, so it's best to avoid them if possible. In
atomicrmw operations there will always be an attempted store so a release
barrier is always needed, but in the cmpxchg case we can delay the DMB until we
know we'll definitely try to perform a store (and so need release semantics).
In the strong cmpxchg case this isn't quite free: we must duplicate the LDREX
instructions to skip the barrier on subsequent iterations. The basic outline
becomes:
ldrex rOld, [rAddr]
cmp rOld, rDesired
bne Ldone
dmb
Lloop:
strex rRes, rNew, [rAddr]
cbz rRes Ldone
ldrex rOld, [rAddr]
cmp rOld, rDesired
beq Lloop
Ldone:
So we'll skip this version for strong operations in "minsize" functions.
llvm-svn: 261568
This change reverts "246133 [RewriteStatepointsForGC] Reduce the number of new instructions for base pointers" and a follow on bugfix 12575.
As pointed out in pr25846, this code suffers from a memory corruption bug. Since I'm (empirically) not going to get back to this any time soon, simply reverting the problematic change is the right answer.
llvm-svn: 261565
LLVM converts adds into ors when it can prove that the operands don't share
any non-zero bits. Teach address folding to recognize or instructions with
constant operands with this property that can be folded into addresses as
if they were adds.
llvm-svn: 261562
This is what was meant to be in the initial commit to fix this bug. The
parens were missing. This commit also adds a test case for the bug and
has undergone full testing on PPC and X86.
llvm-svn: 261546
Summary:
Previously we had a notion of convergent functions but not of convergent
calls. This is insufficient to correctly analyze calls where the target
is unknown, e.g. indirect calls.
Now a call is convergent if it targets a known-convergent function, or
if it's explicitly marked as convergent. As usual, we can remove
convergent where we can prove that no convergent operations are
performed in the call.
Reviewers: chandlerc, jingyue
Subscribers: hfinkel, jhen, tra, llvm-commits
Differential Revision: http://reviews.llvm.org/D17317
llvm-svn: 261544
Summary:
Also add a comment briefly explaining what ifcnv is.
No functional changes.
Reviewers: resistor
Subscribers: echristo, tra, llvm-commits
Differential Revision: http://reviews.llvm.org/D17430
llvm-svn: 261543
Summary:
Convergent instrs shouldn't be made control-dependent on other values,
but this is basically the whole point of tail duplication. So just bail
if we see a convergent instruction.
Reviewers: iteratee
Subscribers: jholewinski, jhen, hfinkel, tra, jingyue, llvm-commits
Differential Revision: http://reviews.llvm.org/D17320
llvm-svn: 261540
Rename makeNoWrapRegion to a more obvious makeGuaranteedNoWrapRegion,
and add a comment about the counter-intuitive aspects of the function.
This is to help prevent cases like PR26628.
llvm-svn: 261532
This reverts commit r261510, effectively reapplying r261509. The
original commit missed a caller in AArch64ConditionalCompares.
Original commit message:
Pass non-null arguments by reference in MachineTraceMetrics::Trace,
simplifying future work to remove implicit iterator => pointer
conversions.
llvm-svn: 261511
Pass non-null arguments by reference in MachineTraceMetrics::Trace,
simplifying future work to remove implicit iterator => pointer
conversions.
llvm-svn: 261509
Delete MachineInstr::getIterator(), since the term "iterator" is
overloaded when talking about MachineInstr.
- Downcast to ilist_node in iplist::getNextNode() and getPrevNode() so
that ilist_node::getIterator() is still available.
- Add it back as MachineInstr::getInstrIterator(). This matches the
naming in MachineBasicBlock.
- Add MachineInstr::getBundleIterator(). This is explicitly called
"bundle" (not matching MachineBasicBlock) to disintinguish it clearly
from ilist_node::getIterator().
- Update all calls. Some of these I switched to `auto` to remove
boiler-plate, since the new name is clear about the type.
There was one call I updated that looked fishy, but it wasn't clear what
the right answer was. This was in X86FrameLowering::inlineStackProbe(),
added in r252578 in lib/Target/X86/X86FrameLowering.cpp. I opted to
leave the behaviour unchanged, but I'll reply to the original commit on
the list in a moment.
llvm-svn: 261504
The resolver uses the fxsave/fxrstor instructions, which require 16-byte
alignment, to save SSE state to the stack. Since 16-byte alignment can't be
assumed on all OSes (and all i386 OSes share this function) - add code to
automatically bump the alignment to 16-bytes on entry to the function.
llvm-svn: 261503
I missed == and != when I removed implicit conversions between iterators
and pointers in r252380 since they were defined outside ilist_iterator.
Since they depend on getNodePtrUnchecked(), they indirectly rely on UB.
This commit removes all uses of these operators. (I'll delete the
operators themselves in a separate commit so that it can be easily
reverted if necessary.)
There should be NFC here.
llvm-svn: 261498
Stop relying on `getNodePtrUnchecked()` being useful on invalid
iterators. This function is documented to be for internal use only, and
the pointer type will eventually have to change to remove UB from
ilist_iterator. Instead, check the iterator before it has been
invalidated.
llvm-svn: 261497
Stop using `getNodePtrUnchecked()` when building IR. Eventually a
dereference will be required to get at the downcast node, since the
iterator will only store an `ilist_node_base` of some sort.
This should have no functionality change for now, but is a path towards
removing some more UB from ilist.
llvm-svn: 261495
`ilist_iterator<NodeTy>::getNodePtrUnchecked()` is documented as being
for internal use only, but CodeGenPrepare was using it anyway. This
code relies on pulling out the `Value*` pointer even after the lifetime
of the iterator is over. But having this pointer available in
ilist_iterator depends on UB in the first place.
Instead, safely pull out the `Value*` when the iterator is alive and
stop using the internal-only API.
There should be no functionality change here.
llvm-svn: 261493
Add support for the case where we have a consecutive load (which must include the first + last elements) with a mixture of undef/zero elements. We load the vector and then apply a shuffle to clear the zero'd elements.
Differential Revision: http://reviews.llvm.org/D17297
llvm-svn: 261490
Before this patch simplified SCEV expressions for PHI nodes were only returned
the very first time getSCEV() was called, but later calls to getSCEV always
returned the non-simplified value, which had "temporarily" been stored in the
ValueExprMap, but was never removed and consequently blocked the caching of the
simplified PHI expression.
llvm-svn: 261485
Summary:
- Rename `"skylake"` == SkylakeServerProc to `"skylake-avx512"`
- Change `"skylake"` to denote SkylakeClientProc
- Fix the detection of cpu family 6 and model 94 to be
SkylakeClientProc instead of SkylakeServerProc
- Remove the `"cnl"` for CannonLake
Reviewers: craig.topper, delena
Subscribers: zansari, echristo, qcolombet, RKSimon, spatel, DavidKreitzer, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17090
llvm-svn: 261482
Add a common parent `ConstantData` to the constants that have no
operands. These are guaranteed to represent abstract data that is in no
way tied to a specific Module.
This is a good cleanup on its own. It also makes it simpler to disallow
RAUW (and factor away use-lists) on these constants in the future. (I
have some experimental patches that make RAUW illegal on ConstantData,
and they seem to catch a bunch of bugs...)
llvm-svn: 261464
COFF doesn't have sections with mergeable contents. Instead, each
constant pool entry ends up in a COMDAT section. The linker, when
choosing between COMDAT sections, doesn't choose the max alignment of
the two sections. You just get whatever alignment was on the section.
If one constant needed a higher alignment in one object file from
another one, then we will get into trouble if the linker chooses the
lower alignment one.
Instead, lets promote the alignment of the constant pool entry to make
sure we don't use an under aligned constant with an instruction which
assumed otherwise.
This fixes PR26680.
llvm-svn: 261462
The stack pointer is bumped when there is a frame pointer or when there
are static-size objects, but was only getting written back when there
were static-size objects.
llvm-svn: 261453
TailDuplicate can run on either on SSA code or non-SSA code, as indicated to
it by MRI->isSSA() ("PreRegAlloc" here). TailDuplicate does extra work to
preserve SSA invariants when it duplicates code. This patch makes it skip
some of this extra work in the case where the code is not in SSA form.
llvm-svn: 261450
The patch has a necessary call to a function inside an assert. Which is fine
when you have asserts turned on. Not so much when they're off. Sorry about
the regression.
llvm-svn: 261447
This patch corresponds to review:
http://reviews.llvm.org/D17294
It ensures that whatever block we are emitting the prologue/epilogue into, we
have the necessary scratch registers. It takes away the hard-coded register
numbers for use as scratch registers as registers that are guaranteed to be
available in the function prologue/epilogue are not guaranteed to be available
within the function body. Since we shrink-wrap, the prologue/epilogue may end
up in the function body.
llvm-svn: 261441
Fixed a bug introduced by D16683 when a binary shuffle is simplified to a unary shuffle (with undef/zero sentinel mask indices) - if this resulted in only the second input being used combineX86ShuffleChain failed to take this into account and still referenced the first input.
llvm-svn: 261434
First small step towards fixing PR26667 - we need to ensure that combineX86ShuffleChain only gets called with a valid shuffle input node (a similar issue was found in D17041).
llvm-svn: 261433
the algorithm easily degrades into quadratic memory and time complexity.
The easiest example is a long chain of BBs that don't otherwise use a
location. The caching will add an entry for every intermediate block and
limiting the number of results doesn't help as no results are produced
until a definition is found.
Introduce a limit similar to the existing instructions-per-block limit.
This limit counts the total number of blocks checked. If the limit is
reached, entries are considered unknown. The initial value is 1000,
which avoids regressions for normal sized functions while still
limiting edge cases to reasnable memory consumption and execution time.
Differential Revision: http://reviews.llvm.org/D16123
llvm-svn: 261430
No functional change intended. Copying small (<= 64 bits) APInts isn't
expensive but bloats code by generating the slow path everywhere. Moving
doesn't care about the size of the value.
llvm-svn: 261426
This avoids unnecessarily passing them around when calling helper
functions. It may also be slightly faster to call clear() on the
datastructures instead of freshly initializing them for each block.
llvm-svn: 261407
it to actually test the new pass manager AA wiring.
This patch was extracted from the (somewhat too large) D12357 and
rebosed on top of the slightly different design of the new pass manager
AA wiring that I just landed. With this we can start testing the AA in
a thorough way with the new pass manager.
Some minor cleanups to the code in the pass was necessitated here, but
otherwise it is a very minimal change.
Differential Revision: http://reviews.llvm.org/D17372
llvm-svn: 261403
Cleanuppads may be merged together if one is the only predecessor of the
other in which case a simple transform can be performed: replace the
a cleanupret with a branch and remove an unnecessary cleanuppad.
Differential Revision: http://reviews.llvm.org/D17459
llvm-svn: 261390
TLSADDR nodes are lowered into actuall calls inside MC. In order to prevent
shrink-wrapping from pushing prologue/epilogue past them (which result
in TLS variables being accessed before the stack frame is set up), we
put markers, so that the stack gets adjusted properly.
Thanks to Quentin Colombet for guidance/help on how to fix this problem!
llvm-svn: 261387
Summary:
Instead of trying to replace SMRD instructions with a VGPR base pointer
with an equivalent MUBUF instruction, we now copy the base pointer to
SGPRs using v_readfirstlane.
This is safe to do, because any load selected as an SMRD instruction
has been proven to have a uniform base pointer, so each thread in the
wave will have the same pointer value in VGPRs.
This will fix some errors on VI from trying to replace SMRD instructions
with addr64-enabled MUBUF instructions that don't exist.
Reviewers: arsenm, cfang, nhaehnle
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17305
llvm-svn: 261385
Summary:
When optimizing for size, sqrt calls can be incorrectly selected as
AVX512 VSQRT instructions. This is because X86InstrAVX512.td has a
`Requires<[OptForSize]>` in its `avx512_sqrt_scalar` multiclass
definition. Even if the target does not support AVX512, the class can
apparently still be chosen, leading to an incorrect selection of
`vsqrtss`.
In PR26625, this lead to an assertion: Reg >= X86::FP0 && Reg <=
X86::FP6 && "Expected FP register!", because the `vsqrtss` instruction
requires an XMM register, which is not available on i686 CPUs.
Reviewers: grosbach, resistor, joker.eph
Subscribers: spatel, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D17414
llvm-svn: 261360
Now that we don't always add an element to AllocatedStackSlots if we
don't find a pre-existing unallocated stack slot, bumping
StatepointMaxSlotsRequired to `NumSlots + 1` is not correct. Instead
bump the statistic near the push_back, to
Builder.FuncInfo.StatepointStackSlots.size().
llvm-svn: 261348
The check on MFI->getObjectSize() has to be on the FrameIndex, not on
the index of the FrameIndex in AllocatedStackSlots. Weirdly, the tests
I added in rL261336 didn't catch this.
llvm-svn: 261347
This patch enables the vectorization of first-order recurrences. A first-order
recurrence is a non-reduction recurrence relation in which the value of the
recurrence in the current loop iteration equals a value defined in the previous
iteration. The load PRE of the GVN pass often creates these recurrences by
hoisting loads from within loops.
In this patch, we add a new recurrence kind for first-order phi nodes and
attempt to vectorize them if possible. Vectorization is performed by shuffling
the values for the current and previous iterations. The vectorization cost
estimate is updated to account for the added shuffle instruction.
Contributed-by: Matthew Simpson and Chad Rosier <mcrosier@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D16197
llvm-svn: 261346
NFCI. They key motivation here is that I'd like to use
SmallBitVector::all() in a later change. Also, using a bit vector here
seemed better in general.
The only interesting change here is that in the failure case of
allocateStackSlot, we no longer (the equivalent of) push_back(true) to
AllocatedStackSlots. As far as I can tell, this is fine, since we'd
never re-use those slots in the same StatepointLoweringState instance.
Technically there was no need to change the operator[] type accesses to
set() and test(), but I thought it'd be nice to make it obvious that
we're using something other than a std::vector like thing.
llvm-svn: 261337
allocateStackSlot did not consider the size of the value to be spilled
before deciding to re-use a spill slot. This was originally okay (since
originally we'd only ever spill pointers), but it became not okay when
we changed our scheme to directly spill vectors of pointers.
While this change fixes the bug pointed out, it has two performance
caveats:
- It matches spill slot and spillee size exactly, while in theory we
can spill, e.g., an 8 byte pointer into a 16 byte slot. This is
slightly complicated to fix since in the stackmaps section, we report
the size of the spill slot as the size of the "indirect value"; and
if they're no longer equivalent, we'll have to keep track of the
(indirect) value size separately from the stack slot size.
- It will "spuriously run out" of reusable slots, since we now have an
second check in the search loop in addition to the availablity
check (e.g. you had two free scalar slots, and you first ask for a
vector slot followed by a scalar slot). I'll fix this in a later
commit.
llvm-svn: 261336
This removes the unusual loop structure in allocateStackSlot in favor of
something more straightforward. I've also removed the cautionary
comment in the function, which I suspect is historical cruft now, and
confuses more than it enlightens.
llvm-svn: 261335
Summary:
If we don't have the first and last access of an interleaved load group,
the first and last wide load in the loop can do an out of bounds
access. Even though we discard results from speculative loads,
this can cause problems, since it can technically generate page faults
(or worse).
We now discard interleaved load groups that don't have the first and
load in the group.
Reviewers: hfinkel, rengolin
Subscribers: rengolin, llvm-commits, mzolotukhin, anemet
Differential Revision: http://reviews.llvm.org/D17332
llvm-svn: 261331
Summary:
This was broken in r260694 which swapped the address and data operands
for flat store instructions. The code in SIInsertWaits assumes
that the data operand always comes before the address operand, so
we need to add a special case for flat.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17366
llvm-svn: 261330
According to the SystemZ ABI, 128-bit integer types should be
passed and returned via implicit reference. However, this is
not currently implemented at the LLVM IR level for the i128
type. This does not matter when compiling C/C++ code, since
clang will implement the implicit reference itself.
However, it turns out that when calling libgcc helper routines
operating on 128-bit integers, LLVM will use i128 argument and
return value types; the resulting code is not compatible with
the ABI used in libgcc, leading to crashes (see PR26559).
This should be simple to fix, except that i128 currently is not
even a legal type for the SystemZ back end. Therefore, common
code will already split arguments and return values into multiple
parts. The bulk of this patch therefore consists of detecting
such parts, and correctly handling passing via implicit reference
of a value split into multiple parts. If at some time in the
future, i128 becomes a legal type, this code can be removed again.
This fixes PR26559.
llvm-svn: 261325
routine.
We were getting this wrong in small ways and generally being very
inconsistent about it across loop passes. Instead, let's have a common
place where we do this. One minor downside is that this will require
some analyses like SCEV in more places than they are strictly needed.
However, this seems benign as these analyses are complete no-ops, and
without this consistency we can in many cases end up with the legacy
pass manager scheduling deciding to split up a loop pass pipeline in
order to run the function analysis half-way through. It is very, very
annoying to fix these without just being very pedantic across the board.
The only loop passes I've not updated here are ones that use
AU.setPreservesAll() such as IVUsers (an analysis) and the pass printer.
They seemed less relevant.
With this patch, almost all of the problems in PR24804 around loop pass
pipelines are fixed. The one remaining issue is that we run simplify-cfg
and instcombine in the middle of the loop pass pipeline. We've recently
added some loop variants of these passes that would seem substantially
cleaner to use, but this at least gets us much closer to the previous
state. Notably, the seven loop pass managers is down to three.
I've not updated the loop passes using LoopAccessAnalysis because that
analysis hasn't been fully wired into LoopSimplify/LCSSA, and it isn't
clear that those transforms want to support those forms anyways. They
all run late anyways, so this is harmless. Similarly, LSR is left alone
because it already carefully manages its forms and doesn't need to get
fused into a single loop pass manager with a bunch of other loop passes.
LoopReroll didn't use loop simplified form previously, and I've updated
the test case to match the trivially different output.
Finally, I've also factored all the pass initialization for the passes
that use this technique as well, so that should be done regularly and
reliably.
Thanks to James for the help reviewing and thinking about this stuff,
and Ben for help thinking about it as well!
Differential Revision: http://reviews.llvm.org/D17435
llvm-svn: 261316
Certain optimization passes (like globaldce) can prune function
declaration that SjLjEHPrepare assumed would exit when it'd
runOnFunction.
This fixes PR26669.
llvm-svn: 261303
more places to prevent gratuitous re-"runs" of these passes.
The passes themselves don't do any work when run, but we keep spending
time scheduling and running these needlessly when we really don't need
to do so.
This is the first patch towards fixing the really horrible loop pass
pipeline fragmentation pointed out by Sanjoy in PR24804.
llvm-svn: 261302
Summary:
Without this, this command
$ llvm-run llc -stop-after machine-cp -o - <( echo '' )
outputs an error, because we close stdout twice -- once when closing the
file opened for "-o", and again when closing outs().
Also clarify in the outs() definition that you can't ever call it if you
want to open your own raw_fd_ostream on stdout.
Reviewers: jroelofs, tstellarAMD
Subscribers: jholewinski, qcolombet, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17422
llvm-svn: 261286
Today, we do not allow cmpxchg operations with pointer arguments. We require the frontend to insert ptrtoint casts and do the cmpxchg in integers. While correct, this is problematic from a couple of perspectives:
1) It makes the IR harder to analyse (for instance, it make capture tracking overly conservative)
2) It pushes work onto the frontend authors for no real gain
This patch implements the simplest form of IR support. As we did with floating point loads and stores, we teach AtomicExpand to convert back to the old representation. This prevents us needing to change all backends in a single lock step change. Over time, we can migrate each backend to natively selecting the pointer type. In the meantime, we get the advantages of a cleaner IR representation without waiting for the backend changes.
Differential Revision: http://reviews.llvm.org/D17413
llvm-svn: 261281
This is effectively NFC because Atom is the only in-order x86 subtarget currently,
but the predicate would have become wrong if any other in-order CPU came along.
See related discussion in:
http://reviews.llvm.org/D16836
llvm-svn: 261275
This patch is part of the work to make PPCLoopDataPrefetch
target-independent
(http://thread.gmane.org/gmane.comp.compilers.llvm.devel/92758).
Obviously the pass still only used from PPC at this point. Subsequent
patches will start driving this from ARM64 as well.
Due to the previous patch most lines should show up as moved lines.
llvm-svn: 261265
This is done only to make the next patch that move the pass out PPC to
Transforms easier to read. After this most line should show up as moved
lines in that patch.
This patch is part of the work to make PPCLoopDataPrefetch
target-independent
(http://thread.gmane.org/gmane.comp.compilers.llvm.devel/92758).
llvm-svn: 261264
If we know that all of our successors want to be in the exact same
state, it makes sense to hoist the state transition into their common
predecessor.
Differential Revision: http://reviews.llvm.org/D17391
llvm-svn: 261262
Summary: As per title. There was a lot of part missing in the C API, so I had to extend the invoke and landingpad API.
Reviewers: echristo, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17359
llvm-svn: 261254
These atomic operations are conceptually both a load and store from the same location. As such, we can treat them as the most conservative of those two components which in practice, means we can treat them like stores. An cmpxchg or atomicrmw captures the values, but not the locations accessed.
Note: We can probably be more aggressive about the comparison value in an cmpxhg since to have it be in memory, it must already be captured, but I figured it was better to avoid that for the moment.
Note 2: It turns out that since we don't actually support cmpxchg of pointer type, writing a negative test is impossible.
Differential Revision: http://reviews.llvm.org/D17400
llvm-svn: 261245
In r260133, LLVM was changed to no longer extend i8/i16 return values,
as it's not required by the ABI. However, code was found in the wild
that relies on the old behaviour on Darwin, so this commit reverts
back to that old behaviour for Darwin.
On other platforms, it's less likely that code would be depending on
the old behaviour, as GCC and MSVC haven't been extending such return
values.
llvm-svn: 261235
covmap needs to created as non allocatable, but not with
SHT_NOTE. The latter was needed to workaround a problem
of BFD linker with gc, which is no longer needed. (A more
proper longer term fix requires changing FE driver to force
referencing the section using linker script).
Differential Revision: http://reviews.llvm.org/D17309
llvm-svn: 261228
Summary:
These correspond to IMAGE_LOAD/STORE[_MIP] and are going to be used by Mesa
for the GL_ARB_shader_image_load_store extension.
IMAGE_LOAD is already matched by llvm.SI.image.load. That intrinsic has
a legacy name and pretends not to read memory.
Differential Revision: http://reviews.llvm.org/D17276
llvm-svn: 261224
Compiling Hexagon target with GCC 6 produces "error: should have been
declared inside" due to GCC PR c++/69657 which was merged.
Properly wrapping operator<<() definitions within the namespace llvm
fixes the issue.
Author: domagoj.stolfa
Differential Revision: http://reviews.llvm.org/D17281
llvm-svn: 261220
Commit r259357 was reverted because it caused PR26629. We were assuming all
roots of a vectorizable tree could be truncated to the same width, which is not
the case in general. This commit reapplies the patch along with a fix and a new
test case to ensure we don't regress because of this issue again. This should
fix PR26629.
llvm-svn: 261212
convert one test to use this.
This is a particularly significant milestone because it required
a working per-function AA framework which can be queried over each
function from within a CGSCC transform pass (and additionally a module
analysis to be accessible). This is essentially *the* point of the
entire pass manager rewrite. A CGSCC transform is able to query for
multiple different function's analysis results. It works. The whole
thing appears to actually work and accomplish the original goal. While
we were able to hack function attrs and basic-aa to "work" in the old
pass manager, this port doesn't use any of that, it directly leverages
the new fundamental functionality.
For this to work, the CGSCC framework also has to support SCC-based
behavior analysis, etc. The only part of the CGSCC pass infrastructure
not sorted out at this point are the updates in the face of inlining and
running function passes that mutate the call graph.
The changes are pretty boring and boiler-plate. Most of the work was
factored into more focused preperatory patches. But this is what wires
it all together.
llvm-svn: 261203
In cases where the PSHUFB shuffle mask is shared it might not be bitcasted to a vXi8 byte vector. This patch adds support for decoding these wider shuffle masks from the ConstantPool.
The test case in question makes use of this to recognise the shuffle mask is an unary UNPCKL pattern and simplifies accordingly.
llvm-svn: 261201
analysis passes, support pre-registering analyses, and use that to
implement parsing and pre-registering a custom alias analysis pipeline.
With this its possible to configure the particular alias analysis
pipeline used by the AAManager from the commandline of opt. I've updated
the test to show this effectively in use to build a pipeline including
basic-aa as part of it.
My big question for reviewers are around the APIs that are used to
expose this functionality. Are folks happy with pass-by-lambda to do
pass registration? Are folks happy with pre-registering analyses as
a way to inject customized instances of an analysis while still using
the registry for the general case?
Other thoughts of course welcome. The next round of patches will be to
add the rest of the alias analyses into the new pass manager and wire
them up here so that they can be used from opt. This will require
extending the (somewhate limited) functionality of AAManager w.r.t.
module passes.
Differential Revision: http://reviews.llvm.org/D17259
llvm-svn: 261197
While we still do want reducible control flow, the RequiresStructuredCFG
flag imposes more strict structure constraints than WebAssembly wants.
Unsetting this flag enables critical edge splitting and tail merging.
Also, disable TailDuplication explicitly, as it doesn't support virtual
registers, and was previously only disabled by the RequiresStructuredCFG
flag.
llvm-svn: 261190
The commit breaks stage2 compilation on PowerPC. Reverting for now while
this is analyzed. I also have to revert the LiveIntervalTest for now as
that depends on this commit.
Revert "LiveIntervalAnalysis: Remove LiveVariables requirement"
This reverts commit r260806.
Revert "Remove an unnecessary std::move to fix -Wpessimizing-move warning."
This reverts commit r260931.
Revert "Fix typo in LiveIntervalTest"
This reverts commit r260907.
Revert "Add unittest for LiveIntervalAnalysis::handleMove()"
This reverts commit r260905.
llvm-svn: 261189
Changes:
- Added disassembler project
- Fixed all decoding conflicts in .td files
- Added DecoderMethod=“NONE” option to Target.td that allows to
disable decoder generation for an instruction.
- Created decoding functions for VS_32 and VReg_32 register classes.
- Added stubs for decoding all register classes.
- Added several tests for disassembler
Disassembler only supports:
- VI subtarget
- VOP1 instruction encoding
- 32-bit register operands and inline constants
[Valery]
One of the point that requires to pay attention to is how decoder
conflicts were resolved:
- Groups of target instructions were separated by using different
DecoderNamespace (SICI, VI, CI) using similar to AssemblerPredicate
approach.
- There were conflicts in IMAGE_<> instructions caused by two
different reasons:
1. dmask wasn’t specified for the output (fixed)
2. There are image instructions that differ only by the number of
the address components but have the same encoding by the HW spec. The
actual number of address components is determined by the HW at runtime
using image resource descriptor starting from the VGPR encoded in an
IMAGE instruction. This means that we should choose only one instruction
from conflicting group to be the rule for decoder. I didn’t find the way
to disable decoder generation for an arbitrary instruction and therefore
made a onelinear fix to tablegen generator that would suppress decoder
generation when DecoderMethod is set to “NONE”. This is a change that
should be reviewed and submitted first. Otherwise I would need to
specify different DecoderNamespace for every instruction in the
conflicting group. I haven’t checked yet if DecoderMethod=“NONE” is not
used in other targets.
3. IMAGE_GATHER decoder generation is for now disabled and to be
done later.
[/Valery]
Patch By: Sam Kolton
Differential Revision: http://reviews.llvm.org/D16723
llvm-svn: 261185
These passes are optimizations, and should be disabled when not
optimizing.
Also create an MCCodeGenInfo so the opt level is correctly plumbed to
the backend pass manager.
Also remove the command line flag for disabling register coloring;
running llc with -O0 should now be useful for debugging, so it's not
necessary.
Differential Revision: http://reviews.llvm.org/D17327
llvm-svn: 261176
After r261154, we were only clearing flags if the known-zero register was
originally live-in to the basic block, but we have to do it even if not when
more than one COPY has been eliminated, otherwise the user of the first COPY
may still have <kill> marked.
E.g.
BB#N:
%X0 = COPY %XZR
STRXui %X0<kill>, <fi#0>
%X0 = COPY %XZR
STRXui %X0<kill>, <fi#1>
We can eliminate both copies, X0 is not live-in, but we must clear the kill on
the first store.
Unfortunately, I've been unable to come up with a non-fragile test for this.
I've only seen it in the wild with regalloc-created spills, and attempts to
reproduce that in a reasonable way run afoul of COPY coalescing. Even volatile
asm clobbers were moved around. Should fix the aarch64 bot though.
llvm-svn: 261175
Also implements the PDBSymbolCompilandEnv::getValue() method,
which until now had been unimplemented specifically because
variant did not support string values.
llvm-svn: 261173
described by an immediate.
Found via http://reviews.llvm.org/D16867
Thanks to Paul Robinson for pointing this out.
<rdar://problem/24456528>
llvm-svn: 261168
Mostly, this fixes the bug that if the CBZ guaranteed Xn but Wn was used, we
didn't sort out the use-def chain properly.
I've also made it check more than just the last instruction for a compatible
CBZ (so it can cope without fallthroughs). I'd have liked to do that
separately, but it's helps writing the test.
Finally, I removed some custom loops in favour of MachineInstr helpers and
refactored the control flow to flatten it and avoid possibly quadratic
iterations in blocks with many copies. NFC for these, just a general tidy-up.
llvm-svn: 261154
Every symbol, no matter what it's tag is, supports the method
getSymIndexId(). However, this was being forwarded on every
concrete symbol type, so if someone had a PDBSymbol that they
didn't know what type it was (or simply didn't have an instance
of the concrete symbol type), they would not be able to get its
index id. This patch moves the method up to PDBSymbol, so that
no matter what type of object you have, you can always get its
id.
llvm-svn: 261153
The IDiaSymbol::getValue() method returns a variant. Until now,
I had never encountered a string value, so the Variant wrapper
did not support VT_BSTR. Now we have need to support string
values, so this patch just adds support for one extra type to
Variant.
llvm-svn: 261152
This function is used to check whether a dbg.value intrinsic has already
been inserted, but without comparing the DIExpression, it would erroneously
fire on split aggregates and only the first scalar would survive.
Found via http://reviews.llvm.org/D16867.
<rdar://problem/24456528>
llvm-svn: 261145
Loop vectorizer now knows to vectorize GEP and create masked gather and scatter intrinsics for random memory access.
The feature is enabled on AVX-512 target.
Differential Revision: http://reviews.llvm.org/D15690
llvm-svn: 261140
Summary: Store and loads unpacked by instcombine do not always have the right alignement. This explicitely compute the alignement and set it.
Reviewers: dblaikie, majnemer, reames, hfinkel, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17326
llvm-svn: 261139
When support for objc_unsafeClaimAutoreleasedReturnValue has been added to the
ARC optimizer in r258970, one case was missed which would lead the optimizer
to execute an llvm_unreachable. In this case, just handle ClaimRV in the same
way we handle RetainRV.
llvm-svn: 261134
32-bit x86 Windows targets use a linked-list of nodes allocated on the
stack, referenced to via thread-local storage. The personality routine
interprets one of the fields in the node as a 'state number' which
indicates where the personality routine should transfer control.
State transitions are possible only before call-sites which may throw
exceptions. Our previous scheme had us update the state number before
all call-sites which may throw.
Instead, we can try to minimize the number of times we need to store by
reasoning about the nearest store which dominates the current call-site.
If the last store agrees with the current call-site, then we know that
the state-update is redundant and can be elided.
This is largely straightforward: an RPO walk of the blocks allows us to
correctly forward propagate the information when the function is a DAG.
Currently, loops are not handled optimally and may trigger superfluous
state stores.
Differential Revision: http://reviews.llvm.org/D16763
llvm-svn: 261122
Modify ProfileSummary class to make it not instrumented profile specific.
Add a new InstrumentedProfileSummary class that inherits from ProfileSummary.
Differential Revision: http://reviews.llvm.org/D17310
llvm-svn: 261119
Summary:
Previously the machine instructions for bar.sync &co. were not marked as
convergent. This resulted in some MI passes (such as TailDuplication,
fixed in an upcoming patch) doing unsafe things to these instructions.
Reviewers: jingyue
Subscribers: llvm-commits, tra, jholewinski, hfinkel
Differential Revision: http://reviews.llvm.org/D17318
llvm-svn: 261115
Summary:
Otherwise we'll try to do unsafe optimizations on these MIs, such as
sinking loads below calls.
(I suspect that this is not the only bug in the NVPTX instruction
tablegen files; I need to comb through them.)
Reviewers: jholewinski, tra
Subscribers: jingyue, jhen, llvm-commits
Differential Revision: http://reviews.llvm.org/D17315
llvm-svn: 261113
The dynamic table is also an array of a fixed structure, so it can be
represented with a DynReginoInfo.
No major functionality change. The extra error checking is covered by
existing tests with a broken dynamic program header.
Idea extracted from r260488. I did the extra cleanups.
llvm-svn: 261107
Bug description:
The bug was discovered when test was compiled with -O0.
In case scatter result is DAG root , VectorLegalizer failed (assert) due to LowerMSCATTER() return kmask as result.
Change LowerMSCATTER() to return chain as original node do.
Differential Revision: http://reviews.llvm.org/D17331
llvm-svn: 261090
This section is used for debug information and has no need to be
in memory at runtime. This patch also fixes an error when compiling
the Linux kernel. The error is that there are relocations within the
.pdr section in a VDSO. SHT_REL was removed as it is a section type
and not a section flag, therefore it does not make sense for it to
be there. With this patch, LLVM now emits the same flags as
the GNU assembler.
llvm-svn: 261083
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-blend patterns before defaulting to the splitting behaviour.
Part 2 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261082
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-mask patterns before defaulting to the splitting behaviour. In some cases this ends up matching what AVX2 would do anyhow or what AVX1 does on the split vectors.
Part 1 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261081
Avoid reuse of operand variables, keep them local to a particular lowering - the operand collection is unique to each case anyhow.
Renamed from V to Ops to more closely match their purpose.
llvm-svn: 261078
This patch detects vector reductions before instruction selection. Vector
reductions are vectorized reduction operations, and for such operations we have
freedom to reorganize the elements of the result as long as the reduction of them
stay unchanged. This will enable some reduction pattern recognition during
instruction combine such as SAD/dot-product on X86. A flag is added to
SDNodeFlags to mark those vector reduction nodes to be checked during instruction
combine.
To detect those vector reductions, we search def-use chains starting from the
given instruction, and check if all uses fall into two categories:
1. Reduction with another vector.
2. Reduction on all elements.
in which 2 is detected by recognizing the pattern that the loop vectorizer
generates to reduce all elements in the vector outside of the loop, which
includes several ShuffleVector and one ExtractElement instructions.
Differential revision: http://reviews.llvm.org/D15250
llvm-svn: 261070
This reverts commit r261030 and r261036.
(The revision was marked "approved" on phabricator, but some concerns
were raised on the mailing list. Thanks D. Blaikie for notifying me.)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 261055
This fixes very slow compilation on
test/CodeGen/Generic/2010-11-04-BigByval.ll . Note that MaxStoresPerMemcpy
and friends are not yet carefully tuned so the cutoff point is currently
somewhat arbitrary. However, it's important that there be a cutoff point
so that we don't emit unbounded quantities of loads and stores.
llvm-svn: 261050
reference-edge SCCs.
This essentially builds a more normal call graph as a subgraph of the
"reference graph" that was the old model. This allows both to exist and
the different use cases to use the aspect which addresses their needs.
Specifically, the pass manager and other *ordering* constrained logic
can use the reference graph to achieve conservative order of visit,
while analyses reasoning about attributes and other properties derived
from reachability can reason about the direct call graph.
Note that this isn't necessarily complete: it doesn't model edges to
declarations or indirect calls. Those can be found by scanning the
instructions of the function if desirable, and in fact every user
currently does this in order to handle things like calls to instrinsics.
If useful, we could consider caching this information in the call graph
to save the instruction scans, but currently that doesn't seem to be
important.
An important realization for why the representation chosen here works is
that the call graph is a formal subset of the reference graph and thus
both can live within the same data structure. All SCCs of the call graph
are necessarily contained within an SCC of the reference graph, etc.
The design is to build 'RefSCC's to model SCCs of the reference graph,
and then within them more literal SCCs for the call graph.
The formation of actual call edge SCCs is not done lazily, unlike
reference edge 'RefSCC's. Instead, once a reference SCC is formed, it
directly builds the call SCCs within it and stores them in a post-order
sequence. This is used to provide a consistent platform for mutation and
update of the graph. The post-order also allows for very efficient
updates in common cases by bounding the number of nodes (and thus edges)
considered.
There is considerable common code that I'm still looking for the best
way to factor out between the various DFS implementations here. So far,
my attempts have made the code harder to read and understand despite
reducing the duplication, which seems a poor tradeoff. I've not given up
on figuring out the right way to do this, but I wanted to wait until
I at least had the system working and tested to continue attempting to
factor it differently.
This also requires introducing several new algorithms in order to handle
all of the incremental update scenarios for the more complex structure
involving two edge colorings. I've tried to comment the algorithms
sufficiently to make it clear how this is expected to work, but they may
still need more extensive documentation.
I know that there are some changes which are not strictly necessarily
coupled here. The process of developing this started out with a very
focused set of changes for the new structure of the graph and
algorithms, but subsequent changes to bring the APIs and code into
consistent and understandable patterns also ended up touching on other
aspects. There was no good way to separate these out without causing
*massive* merge conflicts. Ultimately, to a large degree this is
a rewrite of most of the core algorithms in the LCG class and so I don't
think it really matters much.
Many thanks to the careful review by Sanjoy Das!
Differential Revision: http://reviews.llvm.org/D16802
llvm-svn: 261040
__chkstk clobbers EAX. If EAX is live across the prologue, then we have
to take extra steps to save it. We already had code to do this if EAX
was a register parameter. This change adapts it to work when shrink
wrapping is used.
llvm-svn: 261039
Summary: Loading IR with debug info improves MDString::get() from 19ms to 10ms.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16597
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 261030
Summary:
On the contrary to Full LTO, ThinLTO can afford to shift compile time
from the frontend to the linker: both phases are parallel (even if
it is not totally "free": projects like clang are reusing product
from the "compile phase" for multiple link, think about
libLLVMSupport reused for opt, llc, etc.).
This pipeline is based on the proposal in D13443 for full LTO. We
didn't move forward on this proposal because the LTO link was far too
long after that. We believe that we can afford it with ThinLTO.
The ThinLTO pipeline integrates in the regular O2/O3 flow:
- The compile phase perform the inliner with a somehow lighter
function simplification. (TODO: tune the inliner thresholds here)
This is intendend to simplify the IR and get rid of obvious things
like linkonce_odr that will be inlined.
- The link phase will run the pipeline from the start, extended with
some specific passes that leverage the augmented knowledge we have
during LTO. Especially after the inliner is done, a sequence of
globalDCE/globalOpt is performed, followed by another run of the
"function simplification" passes. It is not clear if this part
of the pipeline will stay as is, as the split model of ThinLTO
does not allow the same benefit as FullLTO without added tricks.
The measurements on the public test suite as well as on our internal
suite show an overall net improvement. The binary size for the clang
executable is reduced by 5%. We're still tuning it with the bringup
of ThinLTO and it will evolve, but this should provide a good starting
point.
Reviewers: tejohnson
Differential Revision: http://reviews.llvm.org/D17115
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 261029
It is intended to contains the passes run over a function after the
inliner is done with a function and before it moves to its callers.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 261028
Currently, we sometimes miscompile this vector pattern:
(c ? -v : v)
We lower it to (because "c" is <4 x i1>, lowered as a vector mask):
(~c & v) | (c & -v)
When we have SSSE3, we incorrectly lower that to PSIGN, which does:
(c < 0 ? -v : c > 0 ? v : 0)
in other words, when c is either all-ones or all-zero:
(c ? -v : 0)
While this is an old bug, it rarely triggers because the PSIGN combine
is too sensitive to operand order. This will be improved separately.
Note that the PSIGN tests are also incorrect. Consider:
%b.lobit = ashr <4 x i32> %b, <i32 31, i32 31, i32 31, i32 31>
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = xor <4 x i32> %b.lobit, <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = and <4 x i32> %a, %0
%2 = and <4 x i32> %b.lobit, %sub
%cond = or <4 x i32> %1, %2
ret <4 x i32> %cond
if %b is zero:
%b.lobit = <4 x i32> zeroinitializer
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = <4 x i32> %a
%2 = <4 x i32> zeroinitializer
%cond = or <4 x i32> %a, zeroinitializer
ret <4 x i32> %a
whereas we currently generate:
psignd %xmm1, %xmm0
retq
which returns 0, as %xmm1 is 0.
Instead, use a pure logic sequence, as described in:
https://graphics.stanford.edu/~seander/bithacks.html#ConditionalNegate
Fixes PR26110.
Differential Revision: http://reviews.llvm.org/D17181
llvm-svn: 261023
When emitting the source filename, the encoding of the string
was checked against the name instead of the filename.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 261019
This apparently comes up when the register allocator decides that a
variable will become undef along a certain path.
Also improve the error message we emit when we can't map from LLVM
register number to CV register number.
llvm-svn: 261016
The register stackifier currently checks for intervening stores (and
loads that may alias them) but doesn't account for the fact that the
instruction being moved may affect intervening loads.
Differential Revision: http://reviews.llvm.org/D17298
llvm-svn: 261014
Summary:
I thought -Xlinker -mllvm -Xlinker -stats worked at some point but maybe
it never did.
For clang, I believe that stats are printed from cc1_main. This patch
also prints them for LTO, specifically right after codegen happens.
I only looked at the C API for LTO briefly to see if this is a good
place. Probably there are still cases where this wouldn't be printed
but it seems to be working for the common case. I also experimented
putting this in the LTOCodeGenerator destructor but that didn't trigger
for me because ld64 does not destroy the LTOCodeGenerator.
Reviewers: dexonsmith, joker.eph
Subscribers: rafael, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17302
llvm-svn: 261013
The usual way to get a 32-bit relocation is to use a constant extender which doubles the size of the instruction, 4 bytes to 8 bytes.
Another way is to put a .word32 and mix code and data within a function. The disadvantage is it's not a valid instruction encoding and jumping over it causes prefetch stalls inside the hardware.
This relocation packs a 23-bit value in to an "r0 = add(rX, #a)" instruction by overwriting the source register bits. Since r0 is the return value register, if this instruction is placed after a function call which return void, r0 will be filled with an undefined value, the prefetch won't be confused, and the callee can access the constant value by way of the link register.
llvm-svn: 261006
Summary:
This change will add a pass to remove unnecessary zero copies in target blocks
of cbz/cbnz instructions. E.g., the copy instruction in the code below can be
removed because the cbz jumps to BB1 when x0 is zero :
BB0:
cbz x0, .BB1
BB1:
mov x0, xzr
Jun
Reviewers: gberry, jmolloy, HaoLiu, MatzeB, mcrosier
Subscribers: mcrosier, mssimpso, haicheng, bmakam, llvm-commits, aemerson, rengolin
Differential Revision: http://reviews.llvm.org/D16203
llvm-svn: 261004
Original message:
Get rid of the ifdefs in TargetLowering.
Introduce a new API used only by GlobalISel: CallLowering.
This API will contain target hooks dedicated to call lowering.
llvm-svn: 260998
CopyToReg nodes don't support FrameIndex operands. Other targets select
the FI to some LEA-like instruction, but since we don't have that, we
need to insert some kind of instruction that can take an FI operand and
produces a value usable by CopyToReg (i.e. in a vreg). So insert a dummy
copy_local between Op and its FI operand. This results in a redundant
copy which we should optimize away later (maybe in the post-FI-lowering
peephole pass).
Differential Revision: http://reviews.llvm.org/D17213
llvm-svn: 260987
Summary: This change renames output operand for VOP instructions from dst to vdst. This is needed to enable decoding named operands for disassembler.
Reviewers: vpykhtin, tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, nhaustov
Projects: #llvm-amdgpu-spb
Differential Revision: http://reviews.llvm.org/D16920
llvm-svn: 260986
The root issue appears to be a confusion around what makeNoWrapRegion actually does. It seems likely we need two versions of this function with slightly different semantics.
llvm-svn: 260981
WebAssembly doesn't require full RPO; topological sorting is sufficient and
can preserve more of the MachineBlockPlacement ordering. Unfortunately, this
still depends a lot on heuristics, because while we use the
MachineBlockPlacement ordering as a guide, we can't use it in places where
it isn't topologically ordered. This area will require further attention.
llvm-svn: 260978
This avoids some complications updating LiveIntervals to be aware of the new
register lifetimes, because we can just compute new intervals from scratch
rather than describe how the old ones have been changed.
llvm-svn: 260971
Once a pointer is turned into a reference it cannot be nullptr, clang
rightfully warns about this assert being a tautology. Put the assert
before the reference is created.
llvm-svn: 260949
Summary:
Extending findExistingExpansion can use existing value in ExprValueMap.
This patch gives 0.3~0.5% performance improvements on
benchmarks(test-suite, spec2000, spec2006, commercial benchmark)
Reviewers: mzolotukhin, sanjoy, zzheng
Differential Revision: http://reviews.llvm.org/D15559
llvm-svn: 260938
r260925 introduced a version of the *trim methods which is preferable
when trimming a single kind of character. Update all users in llvm.
llvm-svn: 260926
Summary: The name is confusing as it matche another method on the module.
Reviewers: joker.eph, Wallbraker, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17283
llvm-svn: 260920
This patch avoids the initial memset at the cost of making iterators
slightly more complex. This should be beneficial as most SmallPtrSets
hold no or only a few elements, while iterating over them is less
common.
Differential Revision: http://reviews.llvm.org/D16672
llvm-svn: 260913
We always clear the unused bits in the most signifant word so there is
no need to mask them out in countLeadingZerosSlowCase().
Differential Revision: http://reviews.llvm.org/D16621
llvm-svn: 260911
This is an updated version which fixes a bug that happened with
uses tied to an earlyclobber operand which end at an unusual slotindex.
If two definitions write to independent subregisters then they can be
put in any order. LiveIntervalAnalysis::handleMove() did not support
this previously because it looks like moving a definition of a vreg past
another one.
This is a modified version of a patch proposed (two years ago) by
Vincent Lejeune! This version does not touch the read-undef flags and is
extended for the case of moving a subregister def behind all uses - this
can happen for subregister defs that are completely unused.
Differential Revision: http://reviews.llvm.org/D9067
llvm-svn: 260906
This function was basically useless, since volatile memacesses or MIs with
unmodelled sideffects become global memory objects, and the other little
checks are also done elsewhere.
Reviewed by Andy Trick
http://reviews.llvm.org/D16881
llvm-svn: 260899
Summary:
In order to pass the tests, this required marking R_MIPS_16 relocations
as needing to point to the symbol and not the section.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17200
llvm-svn: 260896
Summary:
While shrinking types according to the required bits, we can
encounter insert/extract element instructions. This will cause us to
reach an llvm_unreachable statement.
This change adds support for truncating insert/extract element
operations, and adds a regression test.
Reviewers: jmolloy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17078
llvm-svn: 260893
LICM starts with an *empty* AST, and then merges in each sub-loop. While the
add code is appropriate for sub-loop 2 and up, it's utterly unnecessary for
sub-loop 1. If the AST starts off empty, we can just clone/move the contents
of the subloop into the containing AST.
Reviewed-by: Philip Reames <listmail@philipreames.com>
Differential Revision: http://reviews.llvm.org/D16753
llvm-svn: 260892
Summary:
This section is used for debug information and has no need to be
in memory at runtime. With this patch, LLVM now emits the same flags as
the GNU assembler. This patch also fixes an error when compiling
the Linux kernel, The error is that there are relocations within the
.pdr section in a VDSO.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D17199
llvm-svn: 260879
If KMOVB not supported (require AVX512DQ) only KMOVW can be used so store size should be 2 bytes.
Differential Revision: http://reviews.llvm.org/D17138
llvm-svn: 260878
This ensures that all of the various pieces are working. The next patch
will wire up commandline-driven alias analysis chain building and allow
BasicAA to work with the AAManager.
llvm-svn: 260838
into the new pass manager and fix the latent bugs there.
This lets everything live together nicely, but it isn't really useful
yet. I never finished wiring the AA layer up for the new pass manager,
and so subsequent patches will change this to do that wiring and get AA
stuff more fully integrated into the new pass manager. Turns out this is
necessary even to get functionattrs ported over. =]
llvm-svn: 260836
r180893 added an indirect include of llvm/Config/Targets.def to
llvm/Support/CodeGen.h, which in turn is included by things like
llvm/IR/Module.h. After a full build of LLVM and Clang, ninja had to
rebuild 1274 files after reconfiguring.
This commit strips CodeGen.h back down to just a pile of enums and moves
the expensive includes over to CodeGenCWrappers.h (which is only
included in two places). This gets ninja down to 88 files if you
reconfigure with, e.g., -DLLVM_TARGETS_TO_BUILD=X86.
llvm-svn: 260835
This patch attempts to represent a shuffle as a repeating shuffle (recognisable by is128BitLaneRepeatedShuffleMask) with the source input(s) in their original lanes, followed by a single permutation of the 128-bit lanes to their final destinations.
On AVX2 we can additionally attempt to match using 64-bit sub-lane permutation. AVX2 can also now match a similar 'broadcasted' repeating shuffle.
This patch has several benefits:
* Avoids prematurely matching with lowerVectorShuffleByMerging128BitLanes which can require both inputs to have their input lanes permuted before shuffling.
* Can replace PERMPS/PERMD instructions - although these are useful for cross-lane unary shuffling, they require their shuffle mask to be pre-loaded (and increase register pressure).
* Matching the repeating shuffle makes use of a lot of existing shuffle lowering.
There is an outstanding minor AVX1 regression (combine_unneeded_subvector1 in vector-shuffle-combining.ll) of a previously 128-bit shuffle + subvector splat being converted to a subvector splat + (2 instruction) 256-bit shuffle, I intend to fix this in a followup patch for review.
Differential Revision: http://reviews.llvm.org/D16537
llvm-svn: 260834
As shown in:
https://llvm.org/bugs/show_bug.cgi?id=23203
...we currently die because lowering believes that mfence is allowed without SSE2 on x86-64,
but the instruction def doesn't know that.
I don't know if allowing mfence without SSE is right, but if not, at least now it's consistently wrong. :)
Differential Revision: http://reviews.llvm.org/D17219
llvm-svn: 260828
than the SCC object, and have it scan the instruction stream directly
rather than relying on call records.
This makes the behavior of this routine consistent between libc routines
and LLVM intrinsics for libc routines. We can go and start teaching it
about those being norecurse, but we should behave the same for the
intrinsic and the libc routine rather than differently. I chatted with
James Molloy and the inconsistency doesn't seem intentional and likely
is due to intrinsic calls not being modelled in the call graph analyses.
This also fixes a bug where we would deduce norecurse on optnone
functions, when generally we try to handle optnone functions as-if they
were replaceable and thus unanalyzable.
llvm-svn: 260813
This requirement was a huge hack to keep LiveVariables alive because it
was optionally used by TwoAddressInstructionPass and PHIElimination.
However we have AnalysisUsage::addUsedIfAvailable() which we can use in
those passes.
llvm-svn: 260806
Tests for the new scalarize all private access options will be
included with a future commit.
The only functional change is to make the split/scalarize behavior
for private access of > 4 element vectors to be consistent
with the flat/global handling. This makes the spilling worse
in the two changed tests.
llvm-svn: 260804
Summary:
Export the CloneDebugInfoMetadata utility, which clones all debug info
associated with a function into the first module. Also use this function
in CloneModule on each function we clone (the CloneFunction entrypoint
already does this).
Without this, cloning a module will lead to DI quality regressions,
especially since r252219 reversed the Function <-> DISubprogram edge
(before we could get lucky and have this edge preserved if the
DISubprogram itself was, e.g. due to location metadata).
This was verified to fix missing debug information in julia and
a unittest to verify the new behavior is included.
Patch by Yichao Yu! Thanks!
Reviewers: loladiro, pcc
Differential Revision: http://reviews.llvm.org/D17165
llvm-svn: 260791
As support expands to more runtimes, we'll need to
distinguish between more than just HSA and unknown.
This also lets us stop using unknown everywhere.
llvm-svn: 260790
Summary:
This patch skips DAG combine of fp_round (fp_round x) if it results in
an fp_round from f80 to f16.
fp_round from f80 to f16 always generates an expensive (and as yet,
unimplemented) libcall to __truncxfhf2. This prevents selection of
native f16 conversion instructions from f32 or f64. Moreover, the first
(value-preserving) fp_round from f80 to either f32 or f64 may become a
NOP in platforms like x86.
Reviewers: ab
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D17221
llvm-svn: 260769
Replace spills to memory with spills to registers, if possible. This
applies mostly to predicate registers (both scalar and vector), since
they are very limited in number. A spill of a predicate register may
happen even if there is a general-purpose register available. In cases
like this the stack spill/reload may be eliminated completely.
This optimization will consider all stack objects, regardless of where
they came from and try to match the live range of the stack slot with
a dead range of a register from an appropriate register class.
llvm-svn: 260758
Add another interface to function annotateValueSite() which directly uses the
VauleData array.
Differential Revision: http://reviews.llvm.org/D17108
llvm-svn: 260741
Jacques Pienaar