In preparation for allowing the prefer_type list in the append_args clause,
use the OMPInteropInfo in the attribute for 'declare variant'.
This requires adding a new Argument kind to the attribute code. This change
adds a specific attribute to pass an array of OMPInteropInfo. It implements
new tablegen needed to handle the interop-type part of the structure. When
prefer_type is added, more work will be needed to dump, instantiate, and
serialize the PreferTypes field in OMPInteropInfo.
Differential Revision: https://reviews.llvm.org/D132270
The 'init' clause allows an interop-modifier of prefer_type(list) and
and interop-types 'target' and 'targetsync'.
The 'append_args' clause uses an append-op that also includes
interop-types ('target' and 'targetsync') and will allow
a prefer_type list in the next OpenMP version.
This change adds a helper struct OMPInteropInfo and uses it in the parsing
of both the 'init' and 'append_args' clauses.
One OMPInteropInfo object represents the info in a single 'init' clause.
Since 'append_args' allows a variable number of interop items it will
require an array of OMPInteropInfo objects once that is supported.
Differential Revision: https://reviews.llvm.org/D132171
This patch gives basic parsing and semantic support for
"parallel masked taskloop simd" construct introduced in
OpenMP 5.1 (section 2.16.10)
Differential Revision: https://reviews.llvm.org/D128946
This patch gives basic parsing and semantic support for
"parallel masked taskloop" construct introduced in
OpenMP 5.1 (section 2.16.9)
Differential Revision: https://reviews.llvm.org/D128834
This patch adds a new extension to the `omp begin / end declare variant`
support that causes it to apply to function declarations as well. This
is explicitly not done in the standard, but can be useful in some
situations so we should provide it as an extension. This will allow us
to uniquely bind and overload existing definitions with a simple
declaration using variants.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D124624
This patch gives basic parsing and semantic support for
"masked taskloop simd" construct introduced in OpenMP 5.1 (section 2.16.8)
Differential Revision: https://reviews.llvm.org/D128693
This patch gives basic parsing and semantic support for "masked taskloop"
construct introduced in OpenMP 5.1 (section 2.16.7)
Differential Revision: https://reviews.llvm.org/D128478
For backwards compatiblity, we emit only a warning instead of an error if the
attribute is one of the existing type attributes that we have historically
allowed to "slide" to the `DeclSpec` just as if it had been specified in GNU
syntax. (We will call these "legacy type attributes" below.)
The high-level changes that achieve this are:
- We introduce a new field `Declarator::DeclarationAttrs` (with appropriate
accessors) to store C++11 attributes occurring in the attribute-specifier-seq
at the beginning of a simple-declaration (and other similar declarations).
Previously, these attributes were placed on the `DeclSpec`, which made it
impossible to reconstruct later on whether the attributes had in fact been
placed on the decl-specifier-seq or ahead of the declaration.
- In the parser, we propgate declaration attributes and decl-specifier-seq
attributes separately until we can place them in
`Declarator::DeclarationAttrs` or `DeclSpec::Attrs`, respectively.
- In `ProcessDeclAttributes()`, in addition to processing declarator attributes,
we now also process the attributes from `Declarator::DeclarationAttrs` (except
if they are legacy type attributes).
- In `ConvertDeclSpecToType()`, in addition to processing `DeclSpec` attributes,
we also process any legacy type attributes that occur in
`Declarator::DeclarationAttrs` (and emit a warning).
- We make `ProcessDeclAttribute` emit an error if it sees any non-declaration
attributes in C++11 syntax, except in the following cases:
- If it is being called for attributes on a `DeclSpec` or `DeclaratorChunk`
- If the attribute is a legacy type attribute (in which case we only emit
a warning)
The standard justifies treating attributes at the beginning of a
simple-declaration and attributes after a declarator-id the same. Here are some
relevant parts of the standard:
- The attribute-specifier-seq at the beginning of a simple-declaration
"appertains to each of the entities declared by the declarators of the
init-declarator-list" (https://eel.is/c++draft/dcl.dcl#dcl.pre-3)
- "In the declaration for an entity, attributes appertaining to that entity can
appear at the start of the declaration and after the declarator-id for that
declaration." (https://eel.is/c++draft/dcl.dcl#dcl.pre-note-2)
- "The optional attribute-specifier-seq following a declarator-id appertains to
the entity that is declared."
(https://eel.is/c++draft/dcl.dcl#dcl.meaning.general-1)
The standard contains similar wording to that for a simple-declaration in other
similar types of declarations, for example:
- "The optional attribute-specifier-seq in a parameter-declaration appertains to
the parameter." (https://eel.is/c++draft/dcl.fct#3)
- "The optional attribute-specifier-seq in an exception-declaration appertains
to the parameter of the catch clause" (https://eel.is/c++draft/except.pre#1)
The new behavior is tested both on the newly added type attribute
`annotate_type`, for which we emit errors, and for the legacy type attribute
`address_space` (chosen somewhat randomly from the various legacy type
attributes), for which we emit warnings.
Depends On D111548
Reviewed By: aaron.ballman, rsmith
Differential Revision: https://reviews.llvm.org/D126061
This is a support for " #pragma omp atomic compare fail ". It has Parser & AST support for now.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D123235
Adds support for the reserved locator 'omp_all_memory' for use
in depend clauses with 'out' or 'inout' dependence-types.
Differential Revision: https://reviews.llvm.org/D125828
Adds basic parsing/sema/serialization support for the
#pragma omp target parallel loop directive.
Differential Revision: https://reviews.llvm.org/D122359
Move the SourceRange from the old ParsedAttributesWithRange into
ParsedAttributesView, so we have source range information available
everywhere we use attributes.
This also removes ParsedAttributesWithRange (replaced by simply using
ParsedAttributes) and ParsedAttributesVieWithRange (replaced by using
ParsedAttributesView).
Differential Revision: https://reviews.llvm.org/D121201
Done in manner similar to mutexinoutset
(see https://reviews.llvm.org/D57576)
Runtime support already exists in LLVM OpenMP runtime (see
https://reviews.llvm.org/D97085).
The value used to identify an inoutset dependency type in the LLVM
OpenMP runtime is 8.
Some tests updated due to change in dependency type error messages that
now include new dependency type. Also updated
test/OpenMP/task_codegen.cpp to verify we emit the right code.
This reverts commit ef82063207.
- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat
Passing any feature in the device-isa trait which is not supported by the host
was causing a compilation failure.
Differential Revision: https://reviews.llvm.org/D116549
Implementation is based on the "expected type" as used for
designated-initializers in braced init lists. This means it can deduce the type
in some cases where it's not written:
void foo(Widget);
foo({ /*help here*/ });
Only basic constructor calls are in scope of this patch, excluded are:
- aggregate initialization (no help is offered for aggregates)
- initializer_list initialization (no help is offered for these constructors)
Fixes https://github.com/clangd/clangd/issues/306
Differential Revision: https://reviews.llvm.org/D116317
This patch adds the support for `atomic compare` in parser. The support
in Sema and CodeGen will come soon. For now, it simply eimits an error when it
is encountered.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D115561
Adds initial parsing and sema for the 'append_args' clause.
Note that an AST clause is not created as it instead adds its values
to the OMPDeclareVariantAttr.
Differential Revision: https://reviews.llvm.org/D111854
Adds initial parsing and sema for the 'adjust_args' clause.
Note that an AST clause is not created as it instead adds its expressions
to the OMPDeclareVariantAttr.
Differential Revision: https://reviews.llvm.org/D99905
This patch supports OpenMP 5.0 metadirective features.
It is implemented keeping the OpenMP 5.1 features like dynamic user condition in mind.
A new function, getBestWhenMatchForContext, is defined in llvm/Frontend/OpenMP/OMPContext.h
Currently this function return the index of the when clause with the highest score from the ones applicable in the Context.
But this function is declared with an array which can be used in OpenMP 5.1 implementation to select all the valid when clauses which can be resolved in runtime. Currently this array is set to null by default and its implementation is left for future.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D91944
This patch supports OpenMP 5.0 metadirective features.
It is implemented keeping the OpenMP 5.1 features like dynamic user condition in mind.
A new function, getBestWhenMatchForContext, is defined in llvm/Frontend/OpenMP/OMPContext.h
Currently this function return the index of the when clause with the highest score from the ones applicable in the Context.
But this function is declared with an array which can be used in OpenMP 5.1 implementation to select all the valid when clauses which can be resolved in runtime. Currently this array is set to null by default and its implementation is left for future.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D91944
Mike Rice