Add cli options for new passmanager plugin support to lld.
Currently it is not possible to load dynamic NewPM plugins with lld. This is an
incremental update to D76866. While that patch only added cli options for
llvm-lto2, this adds them for lld as well. This is especially useful for running
dynamic plugins on the linux kernel with LTO.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D120490
https://discourse.llvm.org/t/parallel-input-file-parsing/60164
initializeSymbols currently sets Defined::section and handles non-prevailing
COMDAT groups. Move the code to the parallel postParse to reduce work from the
single-threading code path and make parallel section initialization infeasible.
Postpone reporting duplicate symbol errors so that the messages have the
section information. (`Defined::section` is assigned in postParse and another
thread may not have the information).
* duplicated-synthetic-sym.s: BinaryFile duplicate definition (very rare) now
has no section information
* comdat-binding: `%t/w.o %t/g.o` leads to an undesired undefined symbol. This
is not ideal but we report a diagnostic to inform that this is unsupported.
(See release note)
* comdat-discarded-lazy.s: %tdef.o is unextracted. The new behavior (discarded
section error) makes more sense
* i386-comdat.s: switched to a better approach working around
.gnu.linkonce.t.__x86.get_pc_thunk.bx in glibc<2.32 for x86-32.
Drop the ancient no-longer-relevant workaround for __i686.get_pc_thunk.bx
Depends on D120640
Differential Revision: https://reviews.llvm.org/D120626
https://discourse.llvm.org/t/parallel-input-file-parsing/60164
initializeSymbols currently sets Defined::section and handles non-prevailing
COMDAT groups. Move the code to the parallel postParse to reduce work from the
single-threading code path and make parallel section initialization infeasible.
Postpone reporting duplicate symbol errors so that the messages have the
section information. (`Defined::section` is assigned in postParse and another
thread may not have the information).
* duplicated-synthetic-sym.s: BinaryFile duplicate definition (very rare) now
has no section information
* comdat-binding: `%t/w.o %t/g.o` leads to an undesired undefined symbol. This
is not ideal but we report a diagnostic to inform that this is unsupported.
(See release note)
* comdat-discarded-lazy.s: %tdef.o is unextracted. The new behavior (discarded
section error) makes more sense
Depends on D120640
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D120626
GNU ld 2.38 added -z pack-relative-relocs which is similar to
--pack-dyn-relocs=relr but synthesizes the `GLIBC_ABI_DT_RELR` version
dependency if a shared object named `libc.so.*` has a `GLIBC_2.*` version
dependency.
This is used to implement the (as some glibc folks call) version lockout
mechanism. Add this option, because glibc does not want to support
--pack-dyn-relocs=relr which does not add `GLIBC_ABI_DT_RELR`.
See https://maskray.me/blog/2021-10-31-relative-relocations-and-relr for
detail.
Close https://github.com/llvm/llvm-project/issues/53775
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D120701
Add an OutputDesc class inheriting from SectionCommand. An OutputDesc wraps an
OutputSection. This change allows InputSection::getParent to be inlined.
Differential Revision: https://reviews.llvm.org/D120650
ObjFile::parse combines symbol initialization and resolution. Many tasks
unrelated to symbol resolution can be postponed and parallelized. This patch
extracts local symbol initialization and parallelizes it.
Technically the new function initializeLocalSymbols can be merged into
ObjFile::postParse, but functions like getSrcMsg may access the
uninitialized (all nullptr) local part of InputFile::symbols.
Linking chrome: 1.02x as fast with glibc malloc, 1.04x as fast with mimalloc
Depends on f456c3ae3f and D119908
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D119909
addWrappedSymbols may trigger archive extraction: split stack implementation
uses --wrap=pthread_create, which extracts libgcc.a(generic-morestack-thread.o).
This fixes the regression caused by 09602d3b47 by
making the invariant satisfied: no more non-compileBitcodeFiles object file is
produced at postParseObjectFile.
ObjFile::parse combines symbol initialization and resolution. Many tasks
unrelated to symbol resolution can be postponed and parallelized. This patch
extracts local symbol initialization and parallelizes it.
Technically the new function initializeLocalSymbols can be merged into
ObjFile::postParse, but functions like getSrcMsg may access the
uninitialized (all nullptr) local part of InputFile::symbols.
Linking chrome: 1.02x as fast with glibc malloc, 1.04x as fast with mimalloc
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D119909
Symbol.h depends on InputFiles.h. This change moves us toward dropping the
weird dependency.
The call sites will become slightly uglier (`cast<SharedFile>(s->file)`), but
the compromise is acceptable.
https://discourse.llvm.org/t/parallel-input-file-parsing/60164
To decouple symbol initialization and section initialization, `Defined::section`
assignment should be postponed after input file parsing. To avoid spurious
duplicate definition error due to two definitions in COMDAT groups of the same
signature, we should postpone the duplicate symbol check.
The function is called postScan instead of a more specific name like
checkDuplicateSymbols, because we may merge Symbol::mergeProperties into
postScan. It is placed after compileBitcodeFiles to apply to ET_REL files
produced by LTO. This causes minor diagnostic regression
for skipLinkedOutput configurations: ld.lld --thinlto-index-only a.bc b.o
(bitcode definition prevails) won't detect duplicate symbol error. I think this
is an acceptable compromise. The important cases where (a) both files are
bitcode or (b) --thinlto-index-only is unused are still detected.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D119908
In many call sites we know uncompression cannot happen (non-SHF_ALLOC, or the
data (even if compressed) must have been uncompressed by a previous pass).
Prefer rawData in these cases. data() increases code size and prevents
optimization on rawData.
https://maskray.me/blog/2022-01-16-archives-and-start-lib
For every definition in an extracted archive member, we intern the symbol twice,
once for the archive index entry, once for the .o symbol table after extraction.
This is inefficient.
Symbols in a --start-lib ObjFile/BitcodeFile are only interned once because the
result is cached in symbols[i].
Just handle an archive using the --start-lib code path. We can therefore remove
ArchiveFile and LazyArchive. For many projects, archive member extraction ratio
is high and it is a net performance win. Linking a Release build of clang is
1.01x as fast.
Note: --start-lib scans symbols in the same order that llvm-ar adds them to the
index, so in the common case the semantics should be identical. If the archive
symbol table was created in a different order, or is incomplete, this strategy
may have different semantics. Such cases are considered user error.
The `is neither ET_REL nor LLVM bitcode` error is changed to a warning.
Previously an archive may have such members without a diagnostic. Using a
warning prevents breakage.
* For some tests, the diagnostics get improved where we did not consider
the archive member name: `b.a:` => `b.a(b.o):`.
* `no-obj.s`: the link is now allowed, matching GNU ld
* `archive-no-index.s`: the `is neither ET_REL nor LLVM bitcode` diagnostic is
demoted to a warning.
* `incompatible.s`: even when an archive is unextracted, we may report an
"incompatible with" error.
---
I recently decreased sizeof(SymbolUnion) by 8 and decreased memory usage quite a
bit, so retaining `symbols` for un-extracted archive members should not cause a
memory usage problem.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D119074
https://maskray.me/blog/2022-02-06-all-about-common-symbols#no-define-common
In GNU ld, -dc only affects -r links and causes COMMON symbols to be allocated.
--no-define-common is defined to make COMMON symbols undefined for -shared.
AIUI --no-define-common is a workaround around glibc 2.1 time and not really useful.
gold confuses --define-common with -d/FORCE_COMMON_ALLOCATION and implements
--define-common with -d semantics. Its --no-define-common is incompatible with
GNU ld.
In ld.lld, b2a23cf3c0 fixed the default -r
behavior for COMMON symbols but ported the incompatible gold
--[no-]define-common. To the best of my knowledge, no project uses -dp
--[no-]define-common. So just remove these options.
-d/-dc are used by the following projects:
* grub grub-core/genmod.sh.in uses -Wl,-r,-d (https://lists.gnu.org/archive/html/grub-devel/2022-02/msg00088.html)
* FreeBSD crunchgen uses -Wl,-dc (https://reviews.freebsd.org/D34215)
A no-op implementation works for them. Only when a program inspects relocatable
output by itself and does not recognize COMMON symbols, there may be a problem.
This is an extremely unlikely case.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D119108
Currently `this->getName() == newSym.getName()`.
By keeping the old nameData/nameSize, newSym's nameData/nameSize will be
ignored. The call sites can avoid calling getName().
printTraceSymbol needs to take the symbol name since `other`'s name is empty.
There's a couple of motivations here:
* LLD 12 (which I was originally testing with) was adding an undefined
symbol to the symbol table if you attempted to wrap an unreferenced
lazy symbol, which would later break `--no-allow-shlib-undefined`. LLD
on main actually produces a weak undefined symbol, so this doesn't
break anyway, but it's cleaner to not have the weak undefined symbol
as well. The new behavior also matches bfd and gold.
* PROVIDE in a linker script referencing a wrapped symbol would think
that an otherwise-unreferenced lazy symbol which was wrapped was
actually referenced, and therefore proceed with the definition, which
goes against expectations. The new behavior also matches bfd and gold.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D118756
Replace `f<ELFT>(x)` with `InvokeELFT(f, x)`.
The size reduction comes from turning `link` from 4 specializations into 1.
My x86-64 lld executable is 26KiB smaller.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D118551
Previously an InputSectionBase is dead (`partition==0`) by default.
SyntheticSection calls markLive and BssSection overrides that with markDead.
It is more natural to make InputSectionBase live by default and let
--gc-sections mark InputSectionBase dead.
When linking a Release build of clang:
* --no-gc-sections:, the removed `inputSections` loop decreases markLive time from 4ms to 1ms.
* --gc-sections: the extra `inputSections` loop increases markLive time from 0.181296s to 0.188526s.
This is as of we lose the removing one `inputSections` loop optimization (4374824ccf).
I believe the loss can be mitigated if we refactor markLive.
When an archive with an empty index contains only bitcode files, it is
handled as a group of lazy (--start-lib) object files. If there is a
non-bitcode file, there will be a diagnostic a la GNU ld.
For some programs, the archive member extraction ratio is high (e.g. for chrome,
79% archive members are extracted according to --print-archive-stats=). Because
symbol interning is cached for ObjFile::parseLazy but not for ArchiveFile,
parsing an archive as a group of --start-lib object files may be faster.
If the linker speculatively creates section representations for archive members,
the archive index will not be used.
If we take the above view, the archive index is essentially useless. If a user
wants a fast build without using --start-lib, they may just build thin archives
without index (`ar rcS --thin`).
Therefore, I suggest that we no longer treat the code as a hack, instead as a
supported feature. I believe we will do this anyway if we add parallel symbol
interning (parallel symbol interning for lazy object files is simpler than that
for archives).
Ecosystem issues:
* parseLazy actually has nearly the same behavior as ArchiveFile::parse, but the symbol order may be different.
* users may get addicted to the behavior and build archives not working with GNU ld and gold. I think it is easy to rebuild archives to be compatible.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D117284
Move all variables at file-scope or function-static-scope into a hosting structure (lld::CommonLinkerContext) that lives at lldMain()-scope. Drivers will inherit from this structure and add their own global state, in the same way as for the existing COFFLinkerContext.
See discussion in https://lists.llvm.org/pipermail/llvm-dev/2021-June/151184.html
Differential Revision: https://reviews.llvm.org/D108850
to decrease sizeof(SymbolUnion) by 8 on ELF64 platforms.
Symbols needing such information are typically 1% or fewer (5134 out of 560520
when linking clang, 19898 out of 5550705 when linking chrome). Storing them
elsewhere can decrease memory usage and symbol initialization time.
There is a ~0.8% saving on max RSS when linking a large program.
Future direction:
* Move some of dynsymIndex/verdefIndex/versionId to SymbolAux
* Support mixed TLSDESC and TLS GD without increasing sizeof(SymbolUnion)
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D116281
This complements D111365.
D111365 did not demote isUsedInRegularObj lazy symbols just to work around
a --symbol-ordering-file diagnostic quirk.
The quirk was dropped by 00dd2d15a4,
so we can demote all lazy symbols now, not just the isUsedInRegularObj ones.
@tejohnson noticed that freeing MemoryBuffer instances right before
`lto->compile` can save RSS, likely because the memory can be reused by
LTO indexing (e.g. ThinLTO import/export lists).).
For ELFFileBase instances, symbol and section names are backed by MemoryBuffer,
so destroying MemoryBuffer would make some infrequent passes (parseSymbolVersion,
reportBackrefs) crash and make debugging difficult.
For a BitcodeFile, its content is completely unused, but destroying its
MemoryBuffer makes the buffer identifier inaccessible and may introduce
constraints for future changes.
This patch leverages madvise(MADV_DONTNEED) which achieves the major gain
without the latent issues.
`Maximum resident set size (kbytes): ` for a large --thinlto-index-only link:
* current behavior: 10146104KiB
* destroy MemoryBuffer instances: 8555240KiB
* madvise(MADV_DONTNEED) just bitcodeFiles and lazyBitcodeFiles: 8737372KiB
* madvise(MADV_DONTNEED) all MemoryBuffers: 8739796KiB (16% decrease)
Depends on D116366
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D116367
and remove associated make<XXX> calls.
gnuHash and sysvHash are unchanged, otherwise LinkerScript::discard would
destroy the objects which may be referenced by input section descriptions.
My x86-64 lld executable is 121+KiB smaller.
Placeholders (-y and redirectSymbols removed versioned symbols) are very rare and
the check just makes symbol table iteration slower. Most iterations filter out
placeholders anyway, so this change just drops the filter behavior.
For "Add symbols to symtabs", we need to ensure that redirectSymbols sets
isUsedInRegularObj to false when making a symbol placeholder, to avoid an
assertion failure in SymbolTableSection<ELFT>::writeTo.
My .text is 2KiB smaller. The speed-up linking chrome is 0.x%.
"Process symbol versions" may take 2+% time.
"Redirect symbols" may take 0.6% time.
This change speeds up the two passes and makes `*sym.getVersionSuffix()
== '@'` in the `undefined reference` diagnostic cleaner.
Linking chrome (no debug info) and another large program is 1.5% faster.
For empty-ver2.s: the behavior now matches GNU ld, though I'd consider the input
invalid and the exact behavior does not matter.
The new `lazy` state is the inverse of the previous `LazyObjFile::extracted`.
There are many advantages:
* previously when a LazyObjFile was extracted, a new ObjFile/BitcodeFile was created; now the file is reused, just with `lazy` cleared
* avoid the confusing transfer of `symbols` from LazyObjFile to the new file
* the `incompatible file:` diagnostic is unified with `is incompatible with`
* simpler code, smaller executable (6200+ bytes smaller on x86-64)
* make eager parsing feasible (for parallel section/symbol table initialization)
Currently the singleton `config` is assigned by `config = make<Configuration>()`
and (if `canExitEarly` is false) destroyed by `lld::freeArena`.
`make<Configuration>` allocates a stab with `malloc(4096)`. This both wastes
memory and bloats the executable (every type instantiates `BumpPtrAllocator`
which costs more than 1KiB code on x86-64).
(No need to worry about `clang::no_destroy`. Regular invocations (`canExitEarly`
is true) call `_Exit` via llvm::sys::Process::ExitNoCleanup.)
Reviewed By: lichray
Differential Revision: https://reviews.llvm.org/D116143
There is a trend of having more optional options (usually security
hardening related) like -z cet-report=, -z bti-report=, -z force-bti.
If ld.lld 14.0.0 uses a warning, in 15/16/17/... timeframe when people
add new options to software, they can worry less about linker errors on ld.lld 14.0.0.
In some cases `-z foo` does essential work where a silent ignore can be
problematic, but the user has received a warning. From my observation, the
doing-essential-work `-z foo` is much fewer than the converse. In addition,
the user who cares can use `--fatal-warnings` (Note: GNU ld doesn't upgrade warnings to errors).
It is unclear whether we need something like `clang -Wunknown-warning-option`.
If we ever run into unfortunate transition like `-z start-stop-gc`, the
affected software (e.g. ldc is a compiler which passes linker options to the underlying ld)
can blindly add the `-z` option, without worrying it may cause a linker error to LLD 14.0.0.
Reviewed By: jrtc27, peter.smith
Differential Revision: https://reviews.llvm.org/D114748
Fix r285764: there is no guarantee that Out::first is placed before other
static data members of `struct Out`. After `bufferStart` was introduced, this
out-of-bounds write is destined in many compilers. It is likely benign, though.
And move `Out::elfHeader->size` assignment beside `Out::elfHeader->sectionIndex`
This allows --power10-stubs= and --[no-]power10-stubs to override each other
(they are position dependent in GNU ld).
Also improve --help messages and the manpage.
Note: GNU ld's default "auto" mode uses heuristics to decide whether Power10
instructions are used. Arguably it is a design mistake of R_PPC64_REL24_NOTOC
(acked by the relevant folks on a libc-alpha discussion). We don't implement
"auto", so the default --power10-stubs is the same as "yes".
The canonical term is "extract" (GNU ld documentation, Solaris's `-z *extract`
options). Avoid inventing a term and match --why-extract. (ld64 prefers "load"
but the word is overloaded too much)
Mostly MFC, except for --help messages and the header row in
--print-archive-stats output.
BaseCommand was picked when PHDRS/INSERT/etc were not implemented. Rename it to
SectionCommand to match `sectionCommands` and make it clear that the commands
are used in SECTIONS (except a special case for SymbolAssignment).
Also, improve naming of some BaseCommand variables (base -> cmd).
This brings back the original version of D81359.
I have found several use cases now.
* Unlike GNU ld, LLD's relocation processing is one pass. If we decide to
optimize(relax) R_X86_64_{,REX_}GOTPCRELX, we will suppress GOT generation and
cannot undo the decision later. Optimizing R_X86_64_REX_GOTPCRELX can usually
make it easy to hit `relocation R_X86_64_REX_GOTPCRELX out of range` because
the distance to GOT is usually shorter. Without --no-relax, the user has to
recompile with `-Wa,-mrelax-relocations=no`.
* The option would help during my investigationg of the root cause of https://git.kernel.org/linus/09e43968db40c33a73e9ddbfd937f46d5c334924
* There is need for relaxation for AArch64 & RISC-V. Implementing this for
x86-64 improves consistency with little target-specific cost (two-line
X86_64.cpp change).
Reviewed By: alexander-shaposhnikov
Differential Revision: https://reviews.llvm.org/D113615
For `InputSection` `.foo`, its `InputBaseSection::{areRelocsRela,firstRelocation,numRelocation}` basically
encode the information of `.rel[a].foo`. However, one uint32_t (the relocation section index)
suffices. See the implementation of `relsOrRelas`.
This change decreases sizeof(InputSection) from 184 to 176 on 64-bit Linux.
The maximum resident set size linking a large application (1.2G output) decreases by 0.39%.
Differential Revision: https://reviews.llvm.org/D112513
I think D79300 has fixed the D51892 (`__i686.get_pc_thunk.bx`) issue, so
we can bring back rL330869.
D79300 says `would error undefined symbol instead of the more relevant discarded section`
but it doesn't reproduce now.
This avoids a quirk in `isUndefWeak()`.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D111365
Currenlty PseudoProbeInserter is a pass conditioned on a target switch. It works well with a single clang invocation. It doesn't work so well when the backend is called separately (i.e, through the linker or llc), where user has always to pass -pseudo-probe-for-profiling explictly. I'm making the pass a default pass that requires no command line arg to trigger, but will be actually run depending on whether the CU comes with `llvm.pseudo_probe_desc` metadata.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D110209
Similar to D69607 but for archive member extraction unrelated to GC. This patch adds --why-extract=.
Prior art:
GNU ld -M prints
```
Archive member included to satisfy reference by file (symbol)
a.a(a.o) main.o (a)
b.a(b.o) (b())
```
-M is mainly for input section/symbol assignment <-> output section mapping
(often huge output) and the information may appear ad-hoc.
Apple ld64
```
__Z1bv forced load of b.a(b.o)
_a forced load of a.a(a.o)
```
It doesn't say the reference file.
Arm's proprietary linker
```
Selecting member vsnprintf.o(c_wfu.l) to define vsnprintf.
...
Loading member vsnprintf.o from c_wfu.l.
definition: vsnprintf
reference : _printf_a
```
---
--why-extract= gives the user the full data (which is much shorter than GNU ld
-Map). It is easy to track a chain of references to one archive member with a
one-liner, e.g.
```
% ld.lld main.o a_b.a b_c.a c.a -o /dev/null --why-extract=- | tee stdout
reference extracted symbol
main.o a_b.a(a_b.o) a
a_b.a(a_b.o) b_c.a(b_c.o) b()
b_c.a(b_c.o) c.a(c.o) c()
% ruby -ane 'BEGIN{p={}}; p[$F[1]]=[$F[0],$F[2]] if $.>1; END{x="c.a(c.o)"; while y=p[x]; puts "#{y[0]} extracts #{x} to resolve #{y[1]}"; x=y[0] end}' stdout
b_c.a(b_c.o) extracts c.a(c.o) to resolve c()
a_b.a(a_b.o) extracts b_c.a(b_c.o) to resolve b()
main.o extracts a_b.a(a_b.o) to resolve a
```
Archive member extraction happens before --gc-sections, so this may not be a live path
under --gc-sections, but I think it is a good approximation in practice.
* Specifying a file avoids output interleaving with --verbose.
* Required `=` prevents accidental overwrite of an input if the user forgets `=`. (Most of compiler drivers' long options accept `=` but not ` `)
Differential Revision: https://reviews.llvm.org/D109572
When enable CSPGO for ThinLTO, there are profile cfg mismatch warnings that will cause lld-link errors (with /WX)
due to source changes (e.g. `#if` code runs for profile generation but not for profile use)
To disable it we have to use an internal "/mllvm:-no-pgo-warn-mismatch" option.
In contrast clang uses option ”-Wno-backend-plugin“ to avoid such warnings and gcc has an explicit "-Wno-coverage-mismatch" option.
Add "lto-pgo-warn-mismatch" option to lld COFF/ELF to help turn on/off the profile mismatch warnings explicitly when build with ThinLTO and CSPGO.
Differential Revision: https://reviews.llvm.org/D104431
When enable CSPGO for ThinLTO, there are profile cfg mismatch warnings that will cause lld-link errors (with /WX).
To disable it we have to use an internal "/mllvm:-no-pgo-warn-mismatch" option.
In contrast clang uses option ”-Wno-backend-plugin“ to avoid such warnings and gcc has an explicit "-Wno-coverage-mismatch" option.
Add this "lto-pgo-warn-mismatch" option to lld to help turn on/off the profile mismatch warnings explicitly when build with ThinLTO and CSPGO.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D104431
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
Due to an assembler design flaw (IMO), `.symver foo,foo@v1` produces two symbols `foo` and `foo@v1` if `foo` is defined.
* `v1 {};` produces both `foo` and `foo@v1`, but GNU ld only produces `foo@v1`
* `v1 { foo; };` produces both `foo@@v1` and `foo@v1`, but GNU ld only produces `foo@v1`
* `v2 { foo; };` produces both `foo@@v2` and `foo@v1`, matching GNU ld. (Tested by symver.s)
This patch implements the GNU ld behavior by reusing the symbol redirection mechanism
in D92259. The new test symver-non-default.s checks the first two cases.
Without the patch, the second case will produce `foo@v1` and `foo@@v1` which
looks weird and makes foo unnecessarily default versioned.
Note: `.symver foo,foo@v1,remove` exists but the unfortunate `foo` will not go
away anytime soon.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107235
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
# In a.out, foo3@v1 is incorrectly exported.
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
This is available in GNU ld 2.35 and can be seen as a shortcut for multiple
--export-dynamic-symbol, or a --dynamic-list variant without the symbolic intention.
In the long term, this option probably should be preferred over --dynamic-list.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107317
This option is a subset of -Bsymbolic-functions. It applies to STB_GLOBAL
STT_FUNC definitions.
The address of a vague linkage function (STB_WEAK STT_FUNC, e.g. an inline
function, a template instantiation) seen by a -Bsymbolic-functions linked
shared object may be different from the address seen from outside the shared
object. Such cases are uncommon. (ELF/Mach-O programs may use
`-fvisibility-inlines-hidden` to break such pointer equality. On Windows,
correct dllexport and dllimport are needed to make pointer equality work.
Windows link.exe enables /OPT:ICF by default so different inline functions may
have the same address.)
```
// a.cc -> a.o -> a.so (-Bsymbolic-functions)
inline void f() {}
void *g() { return (void *)&f; }
// b.cc -> b.o -> exe
// The address is different!
inline void f() {}
```
-Bsymbolic-non-weak-functions is a safer (C++ conforming) subset of
-Bsymbolic-functions, which can make such programs work.
Implementations usually emit a vague linkage definition in a COMDAT group. We
could detect the group (with more code) but I feel that we should just check
STB_WEAK for simplicity. A weak definition will thus serve as an escape hatch
for rare cases when users want interposition on definitions.
GNU ld feature request: https://sourceware.org/bugzilla/show_bug.cgi?id=27871
Longer write-up: https://maskray.me/blog/2021-05-16-elf-interposition-and-bsymbolic
If Linux distributions migrate to protected non-vague-linkage external linkage
functions by default, the linker option can still be handy because it allows
rapid experiment without recompilation. Protected function addresses currently
have deep issues in GNU ld.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D102570
This is a follow up to https://reviews.llvm.org/D104080, and ca3bdb57fa (diff-e64a48fabe31db213a631fdc5f2acb51bdddf3f16a8fb2928784f4c579229585). The implementation of call graph profile was changed from a black box section to relocation approach. This was done to be compatible with post processing tools like strip/objcopy, and llvm equivalent. When they are invoked on object file before the final linking step with this new approach the symbol indices correctness is preserved.
The GNU binutils tools change the REL section to RELA section, unlike llvm tools. For example when strip -S is run on the ELF object files, as an intermediate step before linking. To preserve compatibility this patch extends implementation in LLD and ELFDumper to support both REL and RELA sections for call graph profile.
Reviewed By: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D105217
There used to be many cases where addends for Elf_Rel were not emitted in
the final object file (mostly when building for MIPS64 since the input .o
files use RELA but the output uses REL). These cases have been fixed since,
but this patch adds a check to ensure that the written values are correct.
It is based on a previous patch that I added to the CHERI fork of LLD since
we were using MIPS64 as a baseline. The work has now almost entirely
shifted to RISC-V and Arm Morello (which use Elf_Rela), but I thought
it would be useful to upstream our local changes anyway.
This patch adds a (hidden) command line flag --check-dynamic-relocations
that can be used to enable these checks. It is also on by default in
assertions builds for targets that handle all dynamic relocations kinds
that LLD can emit in Target::getImplicitAddend(). Currently this is
enabled for ARM, MIPS, and I386.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101450
... even on targets preferring RELA. The section is only consumed by ld.lld
which can handle REL.
Follow-up to D104080 as I explained in the review. There are two advantages:
* The D104080 code only handles RELA, so arm/i386/mips32 etc may warn for -fprofile-use=/-fprofile-sample-use= usage.
* Decrease object file size for RELA targets
While here, change the relocation to relocate weights, instead of 0,1,2,3,..
I failed to catch the issue during review.
Currently when .llvm.call-graph-profile is created by llvm it explicitly encodes the symbol indices. This section is basically a black box for post processing tools. For example, if we run strip -s on the object files the symbol table changes, but indices in that section do not. In non-visible behavior indices point to wrong symbols. The visible behavior indices point outside of Symbol table: "invalid symbol index".
This patch changes the format by using R_*_NONE relocations to indicate the from/to symbols. The Frequency (Weight) will still be in the .llvm.call-graph-profile, but symbol information will be in relocation section. In LLD information from both sections is used to reconstruct call graph profile. Relocations themselves will never be applied.
With this approach post processing tools that handle relocations correctly work for this section also. Tools can add/remove symbols and as long as they handle relocation sections with this approach information stays correct.
Doing a quick experiment with clang-13.
The size went up from 107KB to 322KB, aggregate of all the input sections. Size of clang-13 binary is ~118MB. For users of -fprofile-use/-fprofile-sample-use the size of object files will go up slightly, it will not impact final binary size.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D104080
This option will be available in GNU ld 2.27 (https://sourceware.org/bugzilla/show_bug.cgi?id=27834).
This option can cancel previously specified -Bsymbolic and
-Bsymbolic-functions. This is useful for excluding some links when the
default uses -Bsymbolic-functions.
Reviewed By: jhenderson, peter.smith
Differential Revision: https://reviews.llvm.org/D102383
Stop using the compatibility spellings of `OF_{None,Text,Append}`
left behind by 1f67a3cba9. A follow-up
will remove them.
Differential Revision: https://reviews.llvm.org/D101650
Fix PR49897: if `__real_foo` has the isUsedInRegularObj bit set, we need to
retain `foo` in .symtab, even if `foo` is undefined. The new behavior will match
GNU ld.
Before the patch, we produced an R_X86_64_JUMP_SLOT relocation referencing the
index 0 undefined symbol, which would be erroed by glibc
(see f96ff3c0f8).
While here, fix another bug: if `__wrap_foo` does not exist, its initial binding
should be `foo`'s.
Change the default to facilitate GC for metadata section usage, so that they
don't need SHF_LINK_ORDER or SHF_GROUP just to drop the unhelpful rule (if they
want to be unconditionally retained, use SHF_GNU_RETAIN
(`__attribute__((retain))`) or linker script `KEEP`).
The dropped SHF_GROUP special case makes the behavior of -z start-stop-gc and -z
nostart-stop-gc closer to GNU ld>=2.37 (https://sourceware.org/PR27451).
However, we default to -z start-stop-gc (which actually matches more closely to
GNU ld before 2015-10 https://sourceware.org/PR19167), which is different from
modern GNU ld (which has the unhelpful rule to work around glibc). As a
compensation, we special case `__libc_` sections as a workaround for glibc<2.34
(https://sourceware.org/PR27492).
Since -z start-stop-gc as the default actually matches the traditional GNU ld
behavior, there isn't much to be aware of. There was a systemd usage which has
been fixed by https://github.com/systemd/systemd/pull/19144
`--shuffle-sections=<seed>` applies to all sections. The new
`--shuffle-sections=<section-glob>=<seed>` makes shuffling selective. To the
best of my knowledge, the option is only used as debugging, so just drop the
original form.
`--shuffle-sections '.init_array*=-1'` `--shuffle-sections '.fini_array*=-1'`.
reverses static constructors/destructors of the same priority.
Useful to detect some static initialization order fiasco.
`--shuffle-sections '.data*=-1'`
reverses `.data*` sections. Useful to detect unfunded pointer comparison results
of two unrelated objects.
If certain sections have an intrinsic order, the old form cannot be used.
Differential Revision: https://reviews.llvm.org/D98679
Implemented the option to omit Power10 instructions from save stubs via the
option --no-power10-stubs or --power10-stubs=no on lld. --power10-stubs= will
override the other option. --power10-stubs=auto also exists to use the default
behaviour (ie allow Power10 instructions in stubs).
Differential Revision: https://reviews.llvm.org/D94627
Jakob Koschel