This reverts commit 71b648f715.
There was a typo in the last commit which was causing LLDB AArch64 Linux
buildbot testsuite failures. Now fixed in current version.
This fixes (works around) two errors with gcc-6.5.
- in the RegisterContext_x86 files, gcc is unable to synthesize a
default constructor -- it thinks it needs to initialize the virtual
base class, even though said classes are abstract. I fix that by
providing a dummy constructor.
- In ReproducerInstrumentationTest, it is not able to deduce that the
TestingRegistry class is movable (it contains a map of unique
pointers). I change the type from Optional<TestingRegistry> to
unique_ptr<TestingRegistry), so that moving is not required
(copying/moving a polymorphic type is not a very good idea in any
case).
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
This patch adds two new dynamic register sets for AArch64 MTE and
Pointer Authentication features. These register sets are dynamic and
will only be available if underlying hardware support either of these
features. LLDB will pull in Aux vector information and create register
infos based on that information.
A follow up patch will add a test case to test these feature registers.
Reviewed By: labath, DavidSpickett
Differential Revision: https://reviews.llvm.org/D96460
This is patch adds support for adding dynamic register sets for
AArch64 dynamic features in LLDB. AArch64 has optional features like
SVE, Pointer Authentication and MTE which means LLDB needs to decide
at run time which registers it needs to pull in for the current
executable based on underlying support for a certain feature.
This patch makes necessary adjustments to make way for dynamic
register infos and dynamic register sets.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D96458
As discussed on lldb-dev
<https://lists.llvm.org/pipermail/lldb-dev/2021-March/016777.html> the
mips code is unmaintained and untested. It also carries a lot of
technical debt which is not limited to mips-specific code.
Generic mips support remains (and is going to be used by the upcoming
freebsd code). Resurrecting mips support should be a matter of re-adding
the relevant register context files (while avoiding reintroducing the
debt).
Split out the common base of Linux hardware breakpoint/watchpoint
support for AArch64 into a Utility class, and use it to implement
the matching support on FreeBSD.
Differential Revision: https://reviews.llvm.org/D96548
Introduce mips64 support to match the legacy FreeBSD plugin. Similarly
to the legacy plugin, the code does not support FPU registers at the
moment. The support for them will be submitted separately as it
requires changes to the register context shared by both plugins.
This also includes software single-stepping support that is moved from
the Linux plugin into a common Utility class. The FreeBSD code also
starts explicitly ignoring EINVAL from PT_CLEARSTEP since this is easier
to implement than checking whether hardware single-stepping were used.
Differential Revision: https://reviews.llvm.org/D95802
This patch builds on previously submitted SVE patches regarding expedited
register set and per thread register infos. (D82853 D82855 and D82857)
We need to resize SVE register based on value received in expedited list.
Also we need to resize SVE registers when we write vg register using
register write vg command. The resize will result in a updated offset
for all of fpr and sve register set. This offset will be configured
in native register context by RegisterInfoInterface and will also be
be updated on client side in GDBRemoteRegisterContext.
A follow up patch will provide a API test to verify this change.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82863
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
This came up while putting together our new strategy to create g/G packets
in compliance with GDB RSP protocol where register offsets are calculated in
increasing order of register numbers without any unused spacing.
RegisterInfoPOSIX_arm64::GPR size was being calculated after alignment
correction to 8 bytes which meant there was a 4 bytes unused space between
last gpr (cpsr) and first vector register V. We have put LLVM_PACKED_START
decorator on RegisterInfoPOSIX_arm64::GPR to make sure single byte
alignment is enforced. Moreover we are now doing to use arm64 user_pt_regs
struct defined in ptrace.h for accessing ptrace user registers.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92063
This patch ovverides GetExpeditedRegisterSet for
NativeRegisterContextLinux_arm64 to send vector granule register in
expedited register set if SVE mode is selected.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82855
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
The Shell/Register tests now rely on the new behavior, and therefore
are run on non-Darwin systems only. The Python (API) test relies
on the legacy behavior, and is run on Darwin only.
Differential Revision: https://reviews.llvm.org/D91504
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
Differential Revision: https://reviews.llvm.org/D91504
The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
This moves in the direction of our effort to synchronize register descriptions
between LLDB and GDB xml description. We want to able to send registers in a
way that their offset fields can be re-constructed based on register sizes
in the increasing order of register number.
In context to Arm64 SVE, FPCR and FPSR are same registers in FPU regset and
SVE regset. Previously FPSR/FPCR offset was set at the end of SVE data
because Linux ptrace data placed FPCR and FPSR at the end of SVE register set.
Considering interoperability with other stubs like QEMU and that g packets
should generate register data in increasing order of register numbers. We
have to move FPCR/FPSR offset up to its original location according to
register numbering scheme of ARM64 registers with SVE registers included.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90741
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
As mentioned in the comment inside the code, the Intel documentation
states that the internal CPU buffer is flushed out to RAM only when tracing is
disabled. Otherwise, the buffer on RAM might be stale.
This diff disables tracing when the trace buffer is going to be read. This is a
quite safe operation, as the reading is done when the inferior is paused at a
breakpoint, so we are not losing any packets because there's no code being
executed.
After the reading is finished, tracing is enabled back.
It's a bit hard to write a test for this now, but Greg Clayton and I will
refactor the PT support and writing tests for it will be easier. However
I tested it manually by doing a script that automates
the following flow
```
(lldb) b main
Breakpoint 1: where = a.out`main + 15 at main.cpp:4:7, address = 0x000000000040050f
(lldb) r
Process 3078226 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 1.1
frame #0: 0x000000000040050f a.out`main at main.cpp:4:7
(lldb) processor-trace start
(lldb) b 5
Breakpoint 2: where = a.out`main + 22 at main.cpp:5:12, address = 0x0000000000400516
(lldb) c
Process 3078226 resuming
Process 3078226 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 2.1
frame #0: 0x0000000000400516 a.out`main at main.cpp:5:12
(lldb) processor-trace show-instr-log
thread #1: tid=3078226
0x40050f <+15>: movl $0x0, -0x8(%rbp)
>>> Before, some runs of the script up to this point lead to empty traces
(lldb) b 6
Breakpoint 3: where = a.out`main + 42 at main.cpp:6:14, address = 0x000000000040052a
(lldb) c
Process 3092991 resuming
Process 3092991 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 3.1
frame #0: 0x000000000040052a a.out`main at main.cpp:6:14
(lldb) processor-trace show-instr-log thread #1: tid=3092991
0x40050f <+15>: movl $0x0, -0x8(%rbp)
0x400516 <+22>: movl $0x0, -0xc(%rbp)
0x40051d <+29>: cmpl $0x2710, -0xc(%rbp) ; imm = 0x2710
0x400524 <+36>: jge 0x400546 ; <+70> at main.cpp
0x400524 <+36>: jge 0x400546 ; <+70> at main.cpp
>>> The trace was re-enabled correctly and includes the instruction of the
first reading.
```
Those instructions correspond to these lines
```
3 int main() {
4 int z = 0;
5 for (int i = 0; i < 10000; i++) {
6 z += fun(z)
...
```
Differential Revision: https://reviews.llvm.org/D85241
This patch adds support for the _M and _m gdb-remote packets, which
(de)allocate memory in the inferior. This works by "injecting" a
m(un)map syscall into the inferior. This consists of:
- finding an executable page of memory
- writing the syscall opcode to it
- setting up registers according to the os syscall convention
- single stepping over the syscall
The advantage of this approach over calling the mmap function is that
this works even in case the mmap function is buggy or unavailable. The
disadvantage is it is more platform-dependent, which is why this patch
only works on X86 (_32 and _64) right now. Adding support for other
linux architectures should be easy and consist of defining the
appropriate syscall constants. Adding support for other OSes depends on
the its ability to do a similar trick.
Differential Revision: https://reviews.llvm.org/D89124
This patch removes register set definitions and other redundant code from
NativeRegisterContextLinux/RegisterContextPOSIX*_arm. Register sets are now
moved under RegisterInfosPOSIX_arm which now uses RegisterInfoAndSetInterface.
This is similar to what we earlier did for AArch64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D86962
There was typo left from changes in CalculateSVEOffset where we moved
FPSR/FPCR offset calculation into WriteRegister and ReadRegister.
Differential Revision: https://reviews.llvm.org/D79699
This patch adds NativeRegisterContext_arm64 ptrace routines to access
AArch64 SVE register set. This patch also adds a test-case to test
AArch64 SVE register access and dynamic size configuration capability.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D79699
In our discussion D79699 SVE ptrace register access support we decide to
invalidate register context cached data on every stop instead of doing
at before Step/Resume.
InvalidateAllRegisters was added to facilitate flushing of SVE register
context configuration and cached register values. It now makes more
sense to move invalidation after every stop where we initiate SVE
configuration update if needed by calling ConfigureRegisterContext.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D84501
Summary:
SVE elf note data requires SVE PT macros for reading writing data. Same macros are used by Linux ptrace SVE register access.
This patch makes necessary changes to lldb/source/Plugins/Process/Linux/LinuxPTraceDefines_arm64sve.h in order to make them sysroot independent.
Reviewers: labath, rengolin
Reviewed By: labath
Subscribers: tschuett, lldb-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D83541
Summary:
This fixes an override issue by marking a function as const so that the
signature maps to the signature of the function in the base class.
This is the original error:
In file included from /root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.cpp:11:
/root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.h:79:10: error: 'size_t lldb_private::process_linux::NativeRegisterContextLinux_s390x::GetGPRSize()' marked 'override', but does not override
79 | size_t GetGPRSize() override { return sizeof(m_regs); }
| ^~~~~~~~~~
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83580
Summary:
This patch aims to combine similar arm64 register set definitions defined in NativeRegisterContextLinux_arm64 and RegisterContextPOSIX_arm64.
I have implemented a register set interface out of RegisterInfoInterface class and moved arm64 register sets into RegisterInfosPOSIX_arm64 which is similar to Utility/RegisterContextLinux_* implemented by various other targets. This will help in managing register sets of new ARM64 architecture features in one place.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: mhorne, emaste, kristof.beyls, atanasyan, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D80105
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
Summary:
This patch simplifies register accesses in NativeRegisterContextLinux_arm64
and also adds some bare minimum caching to avoid multiple calls to ptrace
during a stop.
Linux ptrace returns data in the form of structures containing GPR/FPR data.
This means that one single call is enough to read all GPRs or FPRs. We do
that once per stop and keep reading from or writing to the buffer that we
have in NativeRegisterContextLinux_arm64 class. Before a resume or detach we
write all buffers back.
This is tested on aarch64 thunder x1 with Ubuntu 18.04. Also tested
regressions on x86_64.
Reviewers: labath, clayborg
Reviewed By: labath
Subscribers: kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D69371
Summary:
This change increases the offset of MPX registers (by 128) so they
do not overlap with the offset associated with AVX registers. That was
causing MPX data in GDBRemoteRegisterContext::m_reg_data to get overwritten.
Reviewers: labath
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68874
Summary:
This patch follows the spirit of D63594, and removes some null checks
for things which should be operating invariants. Specifically
{Read,Write}[GF]PR now no longer check whether the supplied buffers are
null, because they never are. After this, the Do*** versions of these
function no longer serve any purpose and are inlined into their callers.
Other cleanups are possible here too, but I am taking this one step at a
time because this involves a lot of architecture-specific code, which I
don't have the hardware to test on (I did do a build-test though).
Reviewers: mgorny, jankratochvil, omjavaid, alexandreyy, uweigand
Subscribers: nemanjai, javed.absar, kbarton, lldb-commits
Differential Revision: https://reviews.llvm.org/D66744
llvm-svn: 370653
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368933
Summary:
Due to a logic error, lldb-server ended up asserting/crashing every time
the debugged process attempted an execve(). This fixes the error, and
extends TestExec to work on other platforms too. The "extension"
consists of avoiding non-standard posix_spawn extensions and using the
classic execve() call, which should be available on any platform that
actually supports re-execing. I change the test decorator from
@skipUnlessDarwin to @skipIfWindows.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D65207
llvm-svn: 366985
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
A bunch of places were checking that DataBufferHeap::GetBytes returns a
non-null pointer right after constructing it. The only time when
GetBytes returns a null pointer is if it is empty (and I'm not sure that
even this is a good idea), but that is clearly not the case here, as the
buffer was constructed with a non-zero size just a couple of lines back.
llvm-svn: 364754
D62502, together with D62503 have broken the builds which have XML
support enabled. Reverting D62503 (r364355) fixed that, but has broken
has left some of the tests introduced by D62502 broken more or less
nondeternimistically (it depended on whether the system happens to place
the library list near unreadable pages of memory). I attempted to make a
partial fix for this in r364748, but Jan Kratochvil pointed out that
this reintroduces the problem which reverting D62503 was trying to
solve.
So instead, I back out the whole thing so we can get back to a clean
slate that works for everyone. We can figure out a way forward from
there.
This reverts r364748, r363772 and r363707.
llvm-svn: 364751
operator new doesn't return a null pointer, even if one turns off
exceptions (it calls std::terminate instead). Therefore, all of this is
dead code.
llvm-svn: 364744
Introduce two common helpers to take care of splitting and recombining
YMM registers to/from XSAVE-like data. Since FreeBSD, Linux and NetBSD
all use XSAVE-like data structures but with potentially different field
layouts, the function takes two pointers -- to XMM register and to YMM
high bits, and copies the data from/to YMMReg type.
While at it, remove support for big endian. To mine and Pavel Labath's
combined knowledge, there is no such thing on x86. Furthermore,
assuming that the YMM register data would be swapped for big endian
seems to be a weird assumption.
Differential Revision: https://reviews.llvm.org/D63610
llvm-svn: 364042
Summary:
This is the fifth patch to improve module loading in a series that started here (where I explain the motivation and solution): D62499
Reading strings with ReadMemory is really slow when reading the path of the shared library. This is because we don't know the length of the path so use PATH_MAX (4096) and these strings are actually super close to the boundary of an unreadable page. So even though we use process_vm_readv it will usually fail because the read size spans to the unreadable page and we then default to read the string word by word with ptrace.
This new function is very similar to another ReadCStringFromMemory that already exists in lldb that makes sure it never reads cross page boundaries and checks if we already read the entire string by finding '\0'.
I was able to reduce the GetLoadedSharedLibraries call from 30ms to 4ms (or something of that order).
Reviewers: clayborg, xiaobai, labath
Reviewed By: labath
Subscribers: emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62503
llvm-svn: 363750
Summary:
This is the fourth patch to improve module loading in a series that started here (where I explain the motivation and solution): D62499
Implement the `xfer:libraries-svr4` packet by adding a new function that generates the list and then in Handle_xfer I generate the XML for it. The XML is really simple so I'm just using string concatenation because I believe it's more readable than having to deal with a DOM api.
Reviewers: clayborg, xiaobai, labath
Reviewed By: labath
Subscribers: emaste, mgorny, srhines, krytarowski, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62502
llvm-svn: 363707
Summary:
This is the third patch to improve module loading in a series that started here (where I explain the motivation and solution): D62499
Add functions to read the r_debug location to know where the linked list of loaded libraries are so I can generate the `xfer:libraries-svr4` packet.
I'm also using this function to implement `GetSharedLibraryInfoAddress` that was "not implemented" for linux.
Most of this code was inspired by the current ds2 implementation here: https://github.com/facebook/ds2/blob/master/Sources/Target/POSIX/ELFProcess.cpp.
Reviewers: clayborg, xiaobai, labath
Reviewed By: clayborg, labath
Subscribers: emaste, krytarowski, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62501
llvm-svn: 363458
Summary:
This is the second patch to improve module loading in a series that started here (where I explain the motivation and solution): https://reviews.llvm.org/D62499
I need to read the aux vector to know where the r_debug map with the loaded libraries are.
The AuxVector class was made generic so it could be reused between the POSIX-DYLD plugin and NativeProcess*. The class itself ended up in the ProcessUtility plugin.
Reviewers: clayborg, xiaobai, labath, JDevlieghere
Reviewed By: clayborg, labath, JDevlieghere
Subscribers: emaste, JDevlieghere, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62500
llvm-svn: 363098
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
While here, update some ppc64le specific check to isPPC64(), if it
applies to big-endian as well, in the hope that it will ease the support
of big-endian if people are interested in this area. The big-endian
variant is used by at least FreeBSD, Gentoo Linux, Adélie Linux, and
Void Linux.
llvm-svn: 360868
Summary:
This is needed for gcc/cstdlib++ 5.4.0, where __get_cpuid_count is not
defined in cpuid.h.
Reviewers: labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61036
llvm-svn: 359120
This was updated in r356703 to use llvm::sys::RetryAfterSignal, which
comes from llvm/Support/Errno.h. The header wasn't added, so it fails if
you compile for arm64/aarch64.
llvm-svn: 358530
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Summary:
We're using ptrace(PTRACE_SETREGSET, NT_X86_XSTATE) to write all non-gpt
registers on x86 linux. Unfortunately, this method has a quirk, where
the kernel rejects all attempts to write to this area if one supplies a
buffer which is smaller than the area size (even though the kernel will
happily accept partial reads from it).
This means that if the CPU supports some new registers/extensions that
we don't know about (in my case it was the PKRU extension), we will fail
to write *any* non-gpr registers, even those that we know about.
Since this is a situation that's likely to appear again and again, I add
code to NativeRegisterContextLinux_x86_64 to detect the runtime size of
the area, and allocate an appropriate buffer. This does not mean that we
will start automatically supporting all new extensions, but it does mean
that the new extensions will not prevent the old ones from working.
This fixes tests attempting to write to non-gpr registers on new intel
processors (cca Kaby Lake Refresh).
Reviewers: jankratochvil, davezarzycki
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D59991
llvm-svn: 357376
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
The "signal" argument was removed from the MonitorCallback function, but
not from the log statements within it. This wasn't noticed because the
name "signal" suddenly started referring to the libc function with that
name.
This fixes that.
llvm-svn: 353419
Summary:
These classes describe the details of the process we are about to
launch, and so they are naturally used by the launching code in the Host
module. Previously they were present in Target because that is the most
important (but by far not the only) user of the launching code.
Since the launching code has other customers, must of which do not care
about Targets, it makes sense to move these classes to the Host layer,
next to the launching code.
This move reduces the number of times that Target is included from host
to 8 (it used to be 14).
Reviewers: zturner, clayborg, jingham, davide, teemperor
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D56602
llvm-svn: 353047
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
Summary:
A fairly simple operation as setting a breakpoint (writing a breakpoint
opcode) at a given address was going through three classes:
NativeProcessProtocol which called NativeBreakpointList, which then
called SoftwareBrekpoint, only to end up again in NativeProcessProtocol
to do the actual writing itself. This is unnecessarily complex and can
be simplified by moving all of the logic into NativeProcessProtocol
class itself, removing a lot of boilerplate.
One of the reeasons for this complexity was that (it seems)
NativeBreakpointList class was meant to hold both software and hardware
breakpoints. However, that never materialized, and hardware breakpoints
are stored in a separate map holding only hardware breakpoints.
Essentially, this patch makes software breakpoints follow that approach
by replacing the heavy SoftwareBraekpoint with a light struct of the
same name, which holds only the data necessary to describe one
breakpoint. The rest of the logic is in the main class. As, at the
lldb-server level, handling software and hardware breakpoints is very
different, this seems like a reasonable state of things.
Reviewers: krytarowski, zturner, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D52941
llvm-svn: 346093
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
Summary:
This function existed (with identical code) in both NativeProcessLinux
and NativeProcessNetBSD, and it is likely that it would be useful to any
future implementation of NativeProcessProtocol.
Therefore I move it to the base class.
Reviewers: krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52719
llvm-svn: 343683
Summary:
This function encodes the knowledge of whether the PC points to the
breakpoint instruction of the one following it after the breakpoint is
"hit". This behavior mainly(*) depends on the architecture and not on the
OS, so it makes sense for it to be implemented in the base class, where
it can be shared between different implementations (Linux and NetBSD
atm).
(*) It is possible for an OS to expose a different API, perhaps by doing
some fixups in the kernel. In this case, the implementation can override
this function to implement custom behavior.
Reviewers: krytarowski, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52532
llvm-svn: 343409
The two existing implementations have the function implemented
identically, and there's no reason to believe that this would be
different for other implementations.
llvm-svn: 342167
This recommits r341487, which was reverted due to failing tests with
clang. It turned out I had incorrectly expected that the literal arrays
passed to ArrayRef constructor will have static (permanent) storage.
This was only the case with gcc, while clang was constructing them on
stack, leading to dangling pointers when the function returns.
The fix is to explicitly assign static storage duration to the opcode
arrays.
llvm-svn: 341758
return the opcode as a Expected<ArrayRef> instead of a
Status+pointer+size combo.
I also move the linux implementation to the base class, as the trap
opcodes are likely to be the same for all/most implementations of the
class (except the arm one, where linux chooses a different opcode than
what the arm spec recommends, which I keep linux-specific).
llvm-svn: 341487
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Most non-local includes of header files living under lldb/sources/
were specified with the full path starting after sources/. However, in
a few instances, other sub-directories were added to include paths, or
Normalize those few instances to follow the style used by the rest of
the codebase, to make it easier to understand.
llvm-svn: 333035
This brings the LLDB configuration closer to LLVM's and removes visual
clutter in the source code by removing the @brief commands from
comments.
This patch also reflows the paragraphs in all doxygen comments.
See also https://reviews.llvm.org/D46290.
Differential Revision: https://reviews.llvm.org/D46321
llvm-svn: 331373
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
- reg_nums were missing the end marker entry
- marked FP test to be skipped for ppc64
Reviewers: labath, clayborg
Reviewed By: labath, clayborg
Subscribers: alexandreyy, lbianc, nemanjai, kbarton
Differential Revision: https://reviews.llvm.org/D43767
Patch by Leandro Lupori <leandro.lupori@gmail.com>
llvm-svn: 326775
Summary:
The PC corresponding to the breakpoint was being calculated wrongly,
which was causing LLDB to never go past the first breakpoint, when
there was a second one adjacent to it.
Reviewers: clayborg, labath
Reviewed By: clayborg, labath
Subscribers: anajuliapc, alexandreyy, lbianc
Differential Revision: https://reviews.llvm.org/D43344
Patch by Leandro Lupori <leandro.lupori@gmail.com>.
llvm-svn: 325728
Summary:
The ObjectFile class was used to determine the architecture of a running
process by inspecting it's main executable. There were two issues with
this:
- it's in the wrong layer
- the call can be very expensive (it can end up computing the crc of the
whole file).
Since the process is running on the host, ideally we would be able to
just query the data straight from the OS like darwin does, but there
doesn't seem to be a reasonable way to do that. So, this fixes the
layering issue by using the llvm object library to inspect the file.
Since we know the process is already running on the host, we just need
to peek at a few bytes of the elf header to determine whether it's 32-
or 64-bit (which should make this faster as well).
Pretty much the same logic was implemented in
NativeProcessProtocol::ResolveProcessArchitecture, so I delete this
logic and replace calls with GetProcessInfo.
Reviewers: eugene, krytarowski
Subscribers: mgorny, hintonda, lldb-commits
Differential Revision: https://reviews.llvm.org/D42488
llvm-svn: 323637
Summary:
The x86 FPR struct was defined as a struct containing a union between
two members: XSAVE and FXSAVE. This patch makes FPR a union directly to
remove one layer of indirection when trying to access the members.
The initial layout of these two structs is identical, which is
recognised by the fact that XSAVE has FXSAVE as its first member, so we
also considered removing one more layer and leave FPR identical to XSAVE
struct, but stopped short of doing that, as the FPR may be used to store
different layouts in the future (e.g., ones generated by the FSAVE
instruction).
Reviewers: clayborg, krytarowski
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D41245
llvm-svn: 320966
Summary:
lldb-server was sending the "exit" packet (W??) twice. This happened
because it was handling both the pre-exit (PTRACE_EVENT_EXIT) and
post-exit (WIFEXITED) as exit events. We had some code which was trying
to detect when we've already sent the exit packet, but this stopped
working quite a while ago.
This never really caused any problems in practice because the client
automatically closes the connection after receiving the first packet, so
the only effect of this was some warning messages about extra packets
from the lldb-server test suite, which were ignored because they didn't
fail the test.
The new test suite will be stricter about this, so I fix this issue
ignoring the first event. I think this is the correct behavior, as the
inferior is not really dead at that point, so it's premature to send the
exit packet.
There isn't an actual test yet which would verify the exit behavior, but
in my next patch I will add a test which will also test this
functionality.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41069
llvm-svn: 320961
struct iovec is used as an interface to system (posix) api's. As such,
we shouldn't be using it in os-independent code, and we shouldn't be
defining our own iovec replacements.
Fortunately, its usage was not very widespread, so the removal was very
easy -- I simply moved a couple declarations into os-specific code.
llvm-svn: 319536
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
This commit removes the concrete_frame_idx member from
NativeRegisterContext and related functions, which was always set to
zero and never used.
I also change the native thread class to store a NativeRegisterContext
as a unique_ptr (documenting the ownership) and make sure it is always
initialized (most of the code was already blindly dereferencing the
register context pointer, assuming it would always be present -- this
makes its treatment consistent).
Reviewers: eugene, clayborg, krytarowski
Subscribers: aemerson, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, uweigand, alexandreyy, lldb-commits
Differential Revision: https://reviews.llvm.org/D39837
llvm-svn: 317881
Summary:
These functions used to return bool to signify whether they were able to
retrieve the data. This is redundant because the ArchSpec and ByteOrder
already have their own "invalid" states, *and* because both of the
current implementations (linux, netbsd) can always provide a valid
result.
This allows us to simplify bits of the code handling these values.
Reviewers: eugene, krytarowski
Subscribers: javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39733
llvm-svn: 317779
Summary:
The NativeThread class is useless without the containing process (and in
some places it is already assuming the process is always around). This
makes it clear that the NativeProcessProtocol is the object owning the
threads, and makes the destruction order deterministic (first threads,
then process). The NativeProcess is the only thing holding a thread
unique_ptr, and methods that used to hand out thread shared pointers now
return raw pointers or references.
Reviewers: krytarowski, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35618
llvm-svn: 316007
Add support for ppc64le to create breakpoints and read/write
general purpose registers.
Other features for ppc64le and functions to read/write
other registers are being implemented.
Patch by Alexandre Yukio Yamashita (alexandreyy)
Differential Revision: https://reviews.llvm.org/D38323
llvm-svn: 315008
Summary:
It defined a couple of types (condition_t) which we don't use anymore,
as we have c++11 goodies now. I remove these definitions.
Also it unnecessarily included a couple of headers which weren't
necessary for it's operation. I remove these, and place the includes in
the relevant files (usually .cpp, usually in Host code) which use them.
This allows us to reduce namespace pollution in most of the lldb files
which don't need the OS-specific definitions.
Reviewers: zturner, jingham
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D35113
llvm-svn: 308304
Summary:
The usage of shared_from_this forces us to separate construction and
initialization phases, because shared_from_this() is not available in
the constructor (or destructor). The shared semantics are not necessary,
as we always have a clear owner of the native process class
(GDBRemoteCommunicationServerLLDB object). Even if we need shared
semantics in the future (which I think we should strongly avoid),
reverting this will not be necessary -- the owners can still easily
store the native process object in a shared pointer if they really want
to -- this just prevents the knowledge of that from leaking into the
class implementation.
After this a NativeThread object will hold a reference to the parent
process (instead of a weak_ptr) -- having a process instance always
available allows us to simplify some logic in this class (some of it was
already simplified because we were asserting that the process is
available, but this makes it obvious).
Reviewers: krytarowski, eugene, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35123
llvm-svn: 308282
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Summary:
This replaces the static functions used for creating
NativeProcessProtocol instances with a factory pattern, and modernizes
the interface of the new class in the process -- I use llvm::Expected
instead of the Status+value combo. I also move some of the common code
(like the Delegate registration into the base class). The new
arrangement has multiple benefits:
- it removes the NativeProcess*** dependency from Process/gdb-remote
(which for example means that liblldb no longer pulls in this code).
- it enables unit testing of the GDBRemoteCommunicationServerLLGS class
(by providing a mock Native Process).
- serves as another example on how to use the llvm::Expected class (I
couldn't get rid of the Initialize-type functions completely here
because of the use of shared_from_this, but that's the next thing on
my list here)
Tests still pass on Linux and I've made sure NetBSD compiles after this.
Reviewers: zturner, eugene, krytarowski
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33778
llvm-svn: 307390
Summary:
The std::move was preventing copy ellision when compiled with
clang, the patch fixes the warning along with rearranging code
to remove unused variables warnings on Linux machines with
older perf_event interface.
Reviewers: labath, ted
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D34946
llvm-svn: 307030
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary:
This patch implements support for Intel(R) Processor Trace
in lldb server. The changes have support for
starting/stopping and reading the trace data. The code
is only available on Linux versions where the perf
attributes for aux buffers are available.
The patch also consists of Unit tests for testing the
core buffer reading function.
Reviewers: lldb-commits, labath, clayborg, zturner, tberghammer
Reviewed By: labath, clayborg
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D33674
llvm-svn: 306516
Summary:
A number of places were trying to decode the result of wait(). Add a simple
utility function that does that and a struct that encapsulates the
decoded result. Then also provide a pretty-printer for that class.
Reviewers: zturner, krytarowski, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33998
llvm-svn: 305689
strerror is not thread-safe. llvm's StrError tries hard to retrieve the
string in a thread-safe way and falls back to strerror only if it does
not have another way.
llvm-svn: 304795
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
There are only two users of NativeRegisterContextRegisterInfo,
and both are in process plugins. Moving this code from Host
to Plugins/Process/Utility thus makes sense, and as it is the
only dependency from Host -> PluginProcessUtility, it also
breaks this cycle, reducing LLDB's overall cycle count from
45 to 44.
llvm-svn: 298466
Summary:
GetAuxvData was causing dependencies from host to target and linux
process modules. It also does not fit netbsd use case, as there we can
only read the auxiliary vector with ptrace, which is better done in the
process plugin, with the other ptrace calls.
I resolve these issues by moving the freebsd and linux versions into the
relevant process plugins. In case of linux, this required adding an
interface in NativeProcessProtocol. The empty definitions on other
platforms can simply be removed.
To get the code compiling I had to add ProcessGdbRemote -> ProcessLinux
dependency, which was not caught before because we depended on it
transitively.
Reviewers: zturner, emaste
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31031
llvm-svn: 298066
Summary:
These classes existed only because of the GetName() static function,
which can be moved to a more natural place anyway. I move the linux
version to NativeProcessLinux (and get rid of ProcFileReader), the
freebsd version to ProcessFreeBSD (and fix a bug where it was using the
current process ID, instead of the inferior pid), and remove the NetBSD
version (which was probably incorrect anyway, as it assumes the current
process instead of the inferior.
I also add an llgs test to that verifies thread names are read
correctly.
Reviewers: zturner, krytarowski, emaste
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30981
llvm-svn: 298058
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Summary:
These two register contexts were identical, so this shouldn't cause any
regressions, but I'd appreciate it if you can check that this at least compiles.
Reviewers: emaste, sas
Subscribers: aemerson, rengolin, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D27126
llvm-svn: 296335
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
In the case we are stepping over the thread creation instruction, we
will end up calling Thread::SingleStep back-to-back twice (because of
the intermediate PTRACE_EVENT_CLONE stop). This will cause the cpu mask
to be set inappropriately (because the old SingleStepCheck object will
be destroyed after we create the new one), and the single-step will
fail.
Before the refactor the code was still incorrect in this case, but in a
different way (the thread was left with the incorrect mask after the
stepping was complete), so this was not easy to spot.
This fixes TestCreateDuringInstructionStep on the affected devices.
llvm-svn: 295440
While refactoring the code in r293046 I made a very basic error -
relying on destructor side-effects of a copyable object. Fix that and
make the object non-copyable.
This fixes the tests on the platforms that need this workaround, but
unfortunately we don't have a way to make a more platform-agnostic test
right now.
llvm-svn: 295345
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
Use ProcessLauncherPosixFork in Linux and NetBSD.
Changes to ProcessLauncherLinux:
- Limit personality.h and ASLR code to Linux.
- Reuse portable ptrace(2) PT_TRACE_ME operation available on Linux and BSDs.
- Limit ETXTBSY error path from execve(2) to Linux.
- In LaunchProcess declaration change virtual to override.
This code should be readily available for FreeBSD.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, clayborg, labath, emaste
Reviewed By: labath
Subscribers: danalbert, srhines, mgorny, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29347
llvm-svn: 293768
The main motivation for me doing this is being able to build an arm
android lldb-server against api level 9 headers, but it seems like a
good cleanup nonetheless.
The entirety of the cpu_set_t dance now resides in SingleStepCheck.cpp,
which is only built on arm64.
llvm-svn: 293046
Use the LLDB_LOG macro instead of the more verbose if(log) ... syntax.
I have also consolidated the log channels (everything now goes to the posix
channel, instead of a mixture of posix and lldb), and cleaned up some of the
more convoluted log statements.
llvm-svn: 292489
Muhammad Omair Javaid