All callers were either assuming their pointer was not null before calling
this, or checking beforehand.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D135668
This teaches ProcessElfCore to recognise the MTE tag segments.
https://www.kernel.org/doc/html/latest/arm64/memory-tagging-extension.html#core-dump-support
These segments contain all the tags for a matching memory segment
which will have the same size in virtual address terms. In real terms
it's 2 tags per byte so the data in the segment is much smaller.
Since MTE is the only tag type supported I have hardcoded some
things to those values. We could and should support more formats
as they appear but doing so now would leave code untested until that
happens.
A few things to note:
* /proc/pid/smaps is not in the core file, only the details you have
in "maps". Meaning we mark a region tagged only if it has a tag segment.
* A core file supports memory tagging if it has at least 1 memory
tag segment, there is no other flag we can check to tell if memory
tagging was enabled. (unlike a live process that can support memory
tagging even if there are currently no tagged memory regions)
Tests have been added at the commands level for a core file with
mte and without.
There is a lot of overlap between the "memory tag read" tests here and the unit tests for
MemoryTagManagerAArch64MTE::UnpackTagsFromCoreFileSegment, but I think it's
worth keeping to check ProcessElfCore doesn't cause an assert.
Depends on D129487
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D129489
Previously if you read a code/data mask before there was a valid thread
you would get the top byte mask. This meant the value was "valid" as in,
don't read it again.
When using a corefile we ask for the data mask very early on and this
meant that later once you did have a thread it wouldn't read the
register to get the rest of the mask.
This fixes that and adds a corefile test generated from the same program
as in my previous change on this theme.
Depends on D118794
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D122411
Currently, all data buffers are assumed to be writable. This is a
problem on macOS where it's not allowed to load unsigned binaries in
memory as writable. To be more precise, MAP_RESILIENT_CODESIGN and
MAP_RESILIENT_MEDIA need to be set for mapped (unsigned) binaries on our
platform.
Binaries are mapped through FileSystem::CreateDataBuffer which returns a
DataBufferLLVM. The latter is backed by a llvm::WritableMemoryBuffer
because every DataBuffer in LLDB is considered to be writable. In order
to use a read-only llvm::MemoryBuffer I had to split our abstraction
around it.
This patch distinguishes between a DataBuffer (read-only) and
WritableDataBuffer (read-write) and updates LLDB to use the appropriate
one.
rdar://74890607
Differential revision: https://reviews.llvm.org/D122856
This reverts commit 0df522969a.
Additional checks are added to fix the detection of the last memory region
in GetMemoryRegions or repeating the "memory region" command when the
target has non-address bits.
Normally you keep reading from address 0, looking up each region's end
address until you get LLDB_INVALID_ADDR as the region end address.
(0xffffffffffffffff)
This is what the remote will return once you go beyond the last mapped region:
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0001000000000000-0xffffffffffffffff) ---
Problem is that when we "fix" the lookup address, we remove some bits
from it. On an AArch64 system we have 48 bit virtual addresses, so when
we fix the end address of the [stack] region the result is 0.
So we loop back to the start.
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0000000000000000-0x0000000000400000) ---
To fix this I added an additional check for the last range.
If the end address of the region is different once you apply
FixDataAddress, we are at the last region.
Since the end of the last region will be the last valid mappable
address, plus 1. That 1 will be removed by the ABI plugin.
The only side effect is that on systems with non-address bits, you
won't get that last catch all unmapped region from the max virtual
address up to 0xf...f.
[0x0000fffff8000000-0x0000fffffffdf000) ---
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
<ends here>
Though in some way this is more correct because that region is not
just unmapped, it's not mappable at all.
No extra testing is needed because this is already covered by
TestMemoryRegion.py, I simply forgot to run it on system that had
both top byte ignore and pointer authentication.
This change has been tested on a qemu VM with top byte ignore,
memory tagging and pointer authentication enabled.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D115508
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
Recognize FreeBSD vmcores (kernel core dumps) through OS ABI = 0xFF
+ ELF version = 0, and do not process them via the elf-core plugin.
While these files use ELF as a container format, they contain raw memory
dump rather than proper VM segments and therefore are not usable
to the elf-core plugin.
Differential Revision: https://reviews.llvm.org/D114967
This reverts commit fac3f20de5.
I found this has broken how we detect the last memory region in
GetMemoryRegions/"memory region" command.
When you're debugging an AArch64 system with pointer authentication,
the ABI plugin will remove the top bit from the end address of the last
user mapped area.
(lldb)
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
ABI plugin removes anything above the 48th bit (48 bit virtual addresses
by default on AArch64, leaving an address of 0.
(lldb)
[0x0000000000000000-0x0000000000400000) ---
You get back a mapping for 0 and get into an infinite loop.
This reverts commit 5fbcf67734.
ProcessDebugger is used in ProcessWindows and NativeProcessWindows.
I thought I was simplifying things by renaming to DoGetMemoryRegionInfo
in ProcessDebugger but the Native process side expects "GetMemoryRegionInfo".
Follow the pattern that WriteMemory uses. So:
* ProcessWindows::DoGetMemoryRegioninfo calls ProcessDebugger::GetMemoryRegionInfo
* NativeProcessWindows::GetMemoryRegionInfo does the same
On AArch64 we have various things using the non address bits
of pointers. This means when you lookup their containing region
you won't find it if you don't remove them.
This changes Process GetMemoryRegionInfo to a non virtual method
that uses the current ABI plugin to remove those bits. Then it
calls DoGetMemoryRegionInfo.
That function does the actual work and is virtual to be overriden
by Process implementations.
A test case is added that runs on AArch64 Linux using the top
byte ignore feature.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D102757
There is no reason why this function should be returning a ConstString.
While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.
I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.
Differential Revision: https://reviews.llvm.org/D111877
In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.
Differential Revision: https://reviews.llvm.org/D109600
lldb_private::DataExtractor contains DataBufferSP m_data_sp which is
relatively expensive to copy (due to multi-threading locking).
llvm::DataExtractor does not have this problem as it uses StringRef
instead.
The copy constructor is explicit as otherwise it is easy to make
unintended modification of a local copy instead of a caller's instance
(D107470 but that is llvm::DataExtractor).
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D107485
Add support for extracting basic data from NetBSD/i386 core dumps.
FPU registers are not supported at the moment.
Differential Revision: https://reviews.llvm.org/D101091
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
Add a function to read NT_PRPSINFO note from FreeBSD core dumps. This
is necessary to get the process ID (NT_PRSTATUS has only thread ID).
Move the lp64 check from NT_PRSTATUS parsing to the parseFreeBSDNotes()
to avoid repeating it.
Differential Revision: https://reviews.llvm.org/D101893
The FreeBSD coredumps from i386 systems contain only FSAVE-style
NT_FPREGSET. Since we do not really support reading that kind of data
anymore, just use NT_X86_XSTATE to get FXSAVE-style data when available.
Differential Revision: https://reviews.llvm.org/D101086
This adds support for reading AArch64 Pointer Authentication regset
from elf-core file. Also includes a test-case for the same. Furthermore
there is also a slight refactoring of RegisterContextPOSIXCore_arm64
members and constructor. linux-aarch64-pac.core file is generated using
lldb/test/API/functionalities/postmortem/elf-core/main.c with following
clang arguments:
-march=armv8.5-a -mbranch-protection=pac-ret+leaf -nostdlib -static -g
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D99941
This is patch adds support for adding dynamic register sets for
AArch64 dynamic features in LLDB. AArch64 has optional features like
SVE, Pointer Authentication and MTE which means LLDB needs to decide
at run time which registers it needs to pull in for the current
executable based on underlying support for a certain feature.
This patch makes necessary adjustments to make way for dynamic
register infos and dynamic register sets.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D96458
As discussed on lldb-dev
<https://lists.llvm.org/pipermail/lldb-dev/2021-March/016777.html> the
mips code is unmaintained and untested. It also carries a lot of
technical debt which is not limited to mips-specific code.
Generic mips support remains (and is going to be used by the upcoming
freebsd code). Resurrecting mips support should be a matter of re-adding
the relevant register context files (while avoiding reintroducing the
debt).
This patch tries to improve memory-read from core files
(in order to improve disassembly functionality).
I am using RHEL 7.7 (linux kernel 3.10) and for a lot of cases,
I was not able to disassemble some functions from backtrace when
debugging crashes from core files. It outputs some dummy code.
The cause of the problem was the fact we are returning all the zeros
from ProcessElfCore::ReadMemory() that is being called within
Disassembler::ParseInstructions() and it disassembles some dummy
opcodes from the buffer returned. Therefore, we are removing zero
bytes filling (padding) completely.
Differential Revision: https://reviews.llvm.org/D93939
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
This moves in the direction of our effort to synchronize register descriptions
between LLDB and GDB xml description. We want to able to send registers in a
way that their offset fields can be re-constructed based on register sizes
in the increasing order of register number.
In context to Arm64 SVE, FPCR and FPSR are same registers in FPU regset and
SVE regset. Previously FPSR/FPCR offset was set at the end of SVE data
because Linux ptrace data placed FPCR and FPSR at the end of SVE register set.
Considering interoperability with other stubs like QEMU and that g packets
should generate register data in increasing order of register numbers. We
have to move FPCR/FPSR offset up to its original location according to
register numbering scheme of ARM64 registers with SVE registers included.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90741
This is a polymorphic class, copying it is a bad idea.
This was not a problem because most classes inheriting from it were
deleting their copy operations themselves. However, this enables us to
delete those explicit deletions, and ensure noone forgets to add them in
the future.
This patch removes register set definitions and other redundant code from
NativeRegisterContextLinux/RegisterContextPOSIX*_arm. Register sets are now
moved under RegisterInfosPOSIX_arm which now uses RegisterInfoAndSetInterface.
This is similar to what we earlier did for AArch64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D86962
This patch updates LLDB's in house version of SVE ptrace/sig macros by
converting them into constants and inlines. They are housed under sve
namespace and are used by process elf-core for reading SVE register data.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85641
Summary:
This patch adds support for AArch64 SVE register infos description and
core file register access.
AArch64 SVE is a an optional extension of Arm v8.3-a architecture. It
has introduced 32 new vector registers Z, 16 predicate P registers and FFR
predicate register. These registers have fixed names but can dynamically
be configured to different size based on underlying OS configuration.
This patch adds register info struct that describes SVE register infos and
also provides RegisterContextPOSIXCore_arm64 routines to access SVE registers.
This patch also introduces a mechanism to configure SVE register sizes and
offsets at startup before exchanging register information across gdb-remote.
TestLinuxCore.py has been updated to include testing of SVE core files.
Reviewers: labath, clayborg, jankratochvil, jasonmolenda, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77047
Summary:
This patch aims to combine similar arm64 register set definitions defined in NativeRegisterContextLinux_arm64 and RegisterContextPOSIX_arm64.
I have implemented a register set interface out of RegisterInfoInterface class and moved arm64 register sets into RegisterInfosPOSIX_arm64 which is similar to Utility/RegisterContextLinux_* implemented by various other targets. This will help in managing register sets of new ARM64 architecture features in one place.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: mhorne, emaste, kristof.beyls, atanasyan, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D80105
Summary:
This patch adds support to access AArch64 FP SIMD core dump registers and adds a test case to verify registers.
This patches fixes a bug where doing "register read --all" causes lldb to crash.
Reviewers: labath
Reviewed By: labath
Subscribers: kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77793
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.
Differential revision: https://reviews.llvm.org/D74245
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
David Spickett