All callers were either assuming their pointer was not null before calling
this, or checking beforehand.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D135668
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z | parallel
--xargs -0 cat | aspell list --mode=none --ignore-case | grep -E
'^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n | grep -vE '.{25}' |
aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential revision: https://reviews.llvm.org/D131122
LLVM contains a helpful function for getting the size of a C-style
array: `llvm::array_lengthof`. This is useful prior to C++17, but not as
helpful for C++17 or later: `std::size` already has support for C-style
arrays.
Change call sites to use `std::size` instead.
Differential Revision: https://reviews.llvm.org/D133501
Previously, depending on how you constructed a UUID from data or a
StringRef, an input value of all zeros was valid (e.g. setFromData)
or not (e.g. setFromOptionalData). Since there was no way to tell
which interpretation to use, it was done somewhat inconsistently.
This standardizes the meaning of a UUID of all zeros to Not Valid,
and removes all the Optional methods and their uses, as well as the
static factories that supported them.
Differential Revision: https://reviews.llvm.org/D132191
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
Currently, all data buffers are assumed to be writable. This is a
problem on macOS where it's not allowed to load unsigned binaries in
memory as writable. To be more precise, MAP_RESILIENT_CODESIGN and
MAP_RESILIENT_MEDIA need to be set for mapped (unsigned) binaries on our
platform.
Binaries are mapped through FileSystem::CreateDataBuffer which returns a
DataBufferLLVM. The latter is backed by a llvm::WritableMemoryBuffer
because every DataBuffer in LLDB is considered to be writable. In order
to use a read-only llvm::MemoryBuffer I had to split our abstraction
around it.
This patch distinguishes between a DataBuffer (read-only) and
WritableDataBuffer (read-write) and updates LLDB to use the appropriate
one.
rdar://74890607
Differential revision: https://reviews.llvm.org/D122856
Report warnings and errors through events instead of printing directly
the to the debugger's error stream. By using events, IDEs such as Xcode
can report these issues in the UI instead of having them show up in the
debugger console.
The new diagnostic events are handled by the default event loop. If a
diagnostic is reported while nobody is listening for the new event
types, it is printed directly to the debugger's error stream.
Differential revision: https://reviews.llvm.org/D121511
This reverts commit 0df522969a.
Additional checks are added to fix the detection of the last memory region
in GetMemoryRegions or repeating the "memory region" command when the
target has non-address bits.
Normally you keep reading from address 0, looking up each region's end
address until you get LLDB_INVALID_ADDR as the region end address.
(0xffffffffffffffff)
This is what the remote will return once you go beyond the last mapped region:
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0001000000000000-0xffffffffffffffff) ---
Problem is that when we "fix" the lookup address, we remove some bits
from it. On an AArch64 system we have 48 bit virtual addresses, so when
we fix the end address of the [stack] region the result is 0.
So we loop back to the start.
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0000000000000000-0x0000000000400000) ---
To fix this I added an additional check for the last range.
If the end address of the region is different once you apply
FixDataAddress, we are at the last region.
Since the end of the last region will be the last valid mappable
address, plus 1. That 1 will be removed by the ABI plugin.
The only side effect is that on systems with non-address bits, you
won't get that last catch all unmapped region from the max virtual
address up to 0xf...f.
[0x0000fffff8000000-0x0000fffffffdf000) ---
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
<ends here>
Though in some way this is more correct because that region is not
just unmapped, it's not mappable at all.
No extra testing is needed because this is already covered by
TestMemoryRegion.py, I simply forgot to run it on system that had
both top byte ignore and pointer authentication.
This change has been tested on a qemu VM with top byte ignore,
memory tagging and pointer authentication enabled.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D115508
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
This reverts commit ef82063207.
- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
This is a retry of the original patch https://reviews.llvm.org/D113965 which was reverted. There was a deadlock in the Manual DWARF indexing code during symbol preloading where the module was asked on the main thread to preload its symbols, and this would in turn cause the DWARF manual indexing to use a thread pool to index all of the compile units, and if there were relocations on the debug information sections, these threads could ask the ObjectFile to load section contents, which could cause a call to ObjectFileELF::RelocateSection() which would ask for the symbol table from the module and it would deadlock. We can't lock the module in ObjectFile::GetSymtab(), so the solution I am using is to use a llvm::once_flag to create the symbol table object once and then lock the Symtab object. Since all APIs on the symbol table use this lock, this will prevent anyone from using the symbol table before it is parsed and finalized and will avoid the deadlock I mentioned. ObjectFileELF::GetSymtab() was never locking the module lock before and would put off creating the symbol table until somewhere inside ObjectFileELF::GetSymtab(). Now we create it one time inside of the ObjectFile::GetSymtab() and immediately lock it which should be safe enough. This avoids the deadlocks and still provides safety.
Differential Revision: https://reviews.llvm.org/D114288
This reverts commit fac3f20de5.
I found this has broken how we detect the last memory region in
GetMemoryRegions/"memory region" command.
When you're debugging an AArch64 system with pointer authentication,
the ABI plugin will remove the top bit from the end address of the last
user mapped area.
(lldb)
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
ABI plugin removes anything above the 48th bit (48 bit virtual addresses
by default on AArch64, leaving an address of 0.
(lldb)
[0x0000000000000000-0x0000000000400000) ---
You get back a mapping for 0 and get into an infinite loop.
This reverts commit 951b107eed.
Buildbots were failing, there is a deadlock in /Users/gclayton/Documents/src/llvm/clean/llvm-project/lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s when ELF files try to relocate things.
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
Differential Revision: https://reviews.llvm.org/D113965
This reverts commit 5fbcf67734.
ProcessDebugger is used in ProcessWindows and NativeProcessWindows.
I thought I was simplifying things by renaming to DoGetMemoryRegionInfo
in ProcessDebugger but the Native process side expects "GetMemoryRegionInfo".
Follow the pattern that WriteMemory uses. So:
* ProcessWindows::DoGetMemoryRegioninfo calls ProcessDebugger::GetMemoryRegionInfo
* NativeProcessWindows::GetMemoryRegionInfo does the same
On AArch64 we have various things using the non address bits
of pointers. This means when you lookup their containing region
you won't find it if you don't remove them.
This changes Process GetMemoryRegionInfo to a non virtual method
that uses the current ABI plugin to remove those bits. Then it
calls DoGetMemoryRegionInfo.
That function does the actual work and is virtual to be overriden
by Process implementations.
A test case is added that runs on AArch64 Linux using the top
byte ignore feature.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D102757
There is no reason why this function should be returning a ConstString.
While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.
I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.
Differential Revision: https://reviews.llvm.org/D111877
The previous version of the patch did not update the definitions in
conditionally compiled code. This patch includes changes to ARC and
windows targets.
Original commit message was:
These were added to support some mips registers on linux, but linux mips
support has now been removed due.
They are still referenced in the freebds mips implementation, but the
completeness of that implementation is also unknown. All other
architectures just set these fields to zero, which is a cause of
significant bloat in our register info definitions.
Arm also has registers with variable sizes, but they were implemented in
a more gdb-compatible fashion and don't use this feature.
Differential Revision: https://reviews.llvm.org/D110914
This reverts commit 00e704bf08.
This commit should should have updated
llvm/llvm-project/lldb/source/Plugins/ABI/ARC/ABISysV_arc.cpp like the other
architectures.
These were added to support some mips registers on linux, but linux mips
support has now been removed due.
They are still referenced in the freebds mips implementation, but the
completeness of that implementation is also unknown. All other
architectures just set these fields to zero, which is a cause of
significant bloat in our register info definitions.
Arm also has registers with variable sizes, but they were implemented in
a more gdb-compatible fashion and don't use this feature.
Differential Revision: https://reviews.llvm.org/D110914
In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.
Differential Revision: https://reviews.llvm.org/D109600
Since https://reviews.llvm.org/D103701 AppendError<...>
sets this for you.
This change includes all of the non-command uses.
Some uses remain where it's either tricky to reason about
the logic, or they aren't paired with AppendError calls.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104379
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
When a program maps one of its own modules for reading, and then
crashes, breakpad can emit two entries for that module in the
ModuleList. We have logic to identify this case by checking permissions
on mapped memory regions and report just the module with an executable
region. As currently written, though, the check is asymmetric -- the
entry with the executable region must be the second one encountered for
the preference to kick in.
This change makes the logic symmetric, so that the first-encountered
module will similarly be preferred if it has an executable region but
the second-encountered module does not. This happens for example when
the module in question is the executable itself, which breakpad likes to
report first -- we need to ignore the other entry for that module when
we see it later, even though it may be mapped at a lower virtual
address.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D94629
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
When opening a minidump, we might discover that it reports a UUID for a
module that doesn't match the build ID, but rather a hash of the .text
section (according to either of two different hash functions, used by
breakpad and Facebook respectively). The current logic searches for a
module by filename only to check the hash; this change updates it to
first search by directory+filename. This is important when the
directory specified in the minidump must be interpreted relative to a
user-provided sysoort, as the leaf directory won't be in the search path
in that case.
Also add a regression test; without this change, module validation fails
because we have just the placeholder module which reports as its path
the platform path in the minidump.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D89155
Breakpad creates minidump files that can a module loaded multiple times. We found that when a process mmap's the object file for a library, this can confuse breakpad into creating multiple modules in the module list. This patch fixes the GetFilteredModules() to check the linux maps for permissions and use the one that has execute permissions. Typically when people mmap a file into memory they don't map it as executable. This helps people to correctly load minidump files for post mortem analysis.
Differential Revision: https://reviews.llvm.org/D86375
Breakpad will always have a UUID for binaries when it creates minidump files. If an ELF files has a GNU build ID, it will use that. If it doesn't, it will create one by hashing up to the first 4096 bytes of the .text section. LLDB was not able to load these binaries even when we had the right binary because the UUID didn't match. LLDB will use the GNU build ID first as the main UUID for a binary and fallback onto a 8 byte CRC if a binary doesn't have one. With this fix, we will check for the Breakpad hash or the Facebook hash (a modified version of the breakpad hash that collides a bit less) and accept binaries when these hashes match.
Differential Revision: https://reviews.llvm.org/D86261
David Spickett