NFC. Switch from calculations based on dwords to bits, to be more
flexible.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D121730
The original design of custom operands support assumed that most GPUs
have the same or very similar operand names end encodings. This is
no longer the case. As a result the support code becomes over-complicated
and difficult to maintain.
This change implements a different design with the following benefits:
- support of aliases;
- support of operands with overlapped encodings;
- identification of defined but unsupported operands.
Differential Revision: https://reviews.llvm.org/D121696
The namespaces of HWREGs is now overlapping with gfx10. Thus the
patch is longer than necessary to just support new names. It also
need to handle proper error messages, i.e. to issue a "specified
hardware register is not supported on this GPU" message.
This may need a major refactoring in the future.
Differential Revision: https://reviews.llvm.org/D121418
gfx90a allows the number of ACC registers (AGPRs) to be set
independently to the VGPR registers. For both HSA and PAL metadata, we
now include an "agpr_count" key to report the number of AGPRs set for
supported devices (gfx90a, gfx908, as determined by hasMAIInsts()).
This is collected from SIProgramInfo.NumAccVGPR for both HSA and PAL.
The AsmParser also now recognizes ".kernel.agpr_count" for supported
devices.
Differential Revision: https://reviews.llvm.org/D116140
Enabled HW_REG_HW_ID as an alias for HW_REG_HW_ID1. This is required for compatibility with existing code.
Differential Revision: https://reviews.llvm.org/D119939
Separate MCRegisterInfo::regsOverlap out from
TargetRegisterInfo::regsOverlap. This is useful in the AMDGPU AsmParser
where we only have access to MCRegisterInfo.
Differential Revision: https://reviews.llvm.org/D119533
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/MC/MCParser/MCAsmParser.h no longer includes llvm/MC/MCParser/MCAsmLexer.h
Preprocessed lines to build llvm on my setup:
after: 1068185081
before: 1068324320
So no compile time benefit to expect, but we still get the looser coupling
between files which is great.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119359
There's a few relevant forward declarations in there that may require downstream
adding explicit includes:
llvm/MC/MCContext.h no longer includes llvm/BinaryFormat/ELF.h, llvm/MC/MCSubtargetInfo.h, llvm/MC/MCTargetOptions.h
llvm/MC/MCObjectStreamer.h no longer include llvm/MC/MCAssembler.h
llvm/MC/MCAssembler.h no longer includes llvm/MC/MCFixup.h, llvm/MC/MCFragment.h
Counting preprocessed lines required to rebuild llvm-project on my setup:
before: 1052436830
after: 1049293745
Which is significant and backs up the change in addition to the usual benefits of
decreasing coupling between headers and compilation units.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119244
Summary:
Add code object v5 support (deafult is still v4)
Generate metadata for implicit kernel args for the new ABI
Set the metadata version to be 1.2
Reviewers:
t-tye, b-sumner, arsenm, and bcahoon
Fixes:
SWDEV-307188, SWDEV-307189
Differential Revision:
https://reviews.llvm.org/D118272
This reverts commit fd4808887e.
This patch causes gcc to issue a lot of warnings like:
warning: base class ‘class llvm::MCParsedAsmOperand’ should be
explicitly initialized in the copy constructor [-Wextra]
These instructions should allow src0 to be a literal with the same
value as the mandatory other literal. Enable it by introducing an
operand that defers adding its value to the MI when decoding till
the mandatory literal is parsed.
Reviewed By: dp, foad
Differential Revision: https://reviews.llvm.org/D111067
Change-Id: I22b0ae0d35bad17b6f976808e48bffe9a6af70b7
This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.
This allows us to ensure that Support doesn't have includes from MC/*.
Differential Revision: https://reviews.llvm.org/D111454
Allow MIMG instructions to be selected with 6/7 VGPRs for vaddr.
Previously these were rounded up to VReg_256 this saves VGPRs.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103800
Add SReg_224, VReg_224, AReg_224, etc.
Link 224-bit types with v7i32/v7f32.
Link existing 192-bit types to newly added v3i64/v3f64/v6i32/v6f32.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D104622
As a follow up to D103672, we should allow vaddr to be larger than
required when assembling GFX10 MIMG instructions.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D103733
Avoid having to round up to v8f32/VReg_256 when only 5 VGPRs are
required for a MIMG address operand.
Maintain _V8 instruction variants of pseudo instructions allowing
assembly prior to GFX10 to work as-is. Currently the validator
can tell for GFX10 what the correct size is, so will disallow
oversize address registers.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D103672
NFC, since no instructions have their AsmMatchConverter
changed, but prepares for that to happen.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D103046
Change-Id: I6afefad899076de7b9a412374d09b95b29e012fa
A16 support for image instructions assembly/disassembly (gfx10) was missing
Also refactor MIMG op addr size calcs to common function
We'd got 3 places where the same operation was being done.
One test is now marked XFAIL until a related codegen patch is in place
Differential Revision: https://reviews.llvm.org/D102231
Change-Id: I7e86e730ef8c71901457855cba570581f4f576bb
AMDGPUAsmParser::isSupportedDPPCtrl() was failing to correctly
find a DPP register operand, regadless of the position it is
always src0. Moved this check into a new validateDPP() method
where we have full instruction already. In particular it was
failing to reject this case:
v_cvt_u32_f64 v5, v[0:1] quad_perm:[0,2,1,1] row_mask:0xf bank_mask:0xf
Essentially it was broken for any case where size of dst and
src0 differ.
It also improves the diagnostics with a proper error message.
The check in the InstPrinter also drops verification of the dst
register as it does not have anything to do with the dpp operand.
Differential Revision: https://reviews.llvm.org/D101930
Ordering of operands was incorrect meaning that a16 operand was treated as tfe
Differential Revision: https://reviews.llvm.org/D101618
Change-Id: I3b15e71ef5ff625f19f52823414ab684d76aca33
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
This instruction is only valid on 2D MSAA and 2D MSAA Array
surfaces. Remove intrinsic support for other dimension types,
and block assembly for unsupported dimensions.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D98397
Update the list of s_sendmsg messages known to the assembler and
disassembler and validate the ones that were added or removed in gfx9
and gfx10.
Differential Revision: https://reviews.llvm.org/D97295
Enabled "bound_ctrl:1" and disabled "bound_ctrl:-1" syntax.
Corrected printer to output "bound_ctrl:1" instead of "bound_ctrl:0".
See bug 35397 for detailed issue description.
Differential Revision: https://reviews.llvm.org/D97048
Previously, instructions which could be
expressed as VOP3 in addition to another
encoding had a _e64 suffix on the tablegen
record name, while those
only available as VOP3 did not. With this
patch, all VOP3s will have the _e64 suffix.
The assembly does not change, only the mir.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D94341
Change-Id: Ia8ec8890d47f8f94bbbdac43745b4e9dd2b03423
- Clarify documentation on initializing scratch.
- Rename compute_pgm_rsrc2 field for enabling scratch from
ENABLE_SGPR_PRIVATE_SEGMENT_WAVEFRONT_OFFSET to
ENABLE_PRIVATE_SEGMENT to match hardware definition.
Differential Revision: https://reviews.llvm.org/D93271
Avoids spurious newlines showing up in the output when emitting assembly
via MC.
Reviewed By: MaskRay, arsenm
Differential Revision: https://reviews.llvm.org/D92690
Revert part of https://reviews.llvm.org/D92084 to make it simpler to
start consuming the EndOfStatement token within AMDGPU's
ParseInstruction in a future patch. This also brings us back to what
every other target currently does.
A future change to move the position back to the end of the statement
would likely need to audit all of the AMDGPUOperand SMLoc ranges, and
determine the SMLoc for the last character of the last operand.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D92960
Mubuf rtn atomics use GLC_1 thus default value for glc operand
should be -1, see https://reviews.llvm.org/D90730.
This allows us to report error when rtn atomic requires glc=1
but does not have glc operand in input.
Differential Revision: https://reviews.llvm.org/D92654
It's more future-proof to use isGFX10Plus from the start, on the
assumption that future architectures will be based on current
architectures.
Also make use of the existing isGFX9Plus in a few places.
Differential Revision: https://reviews.llvm.org/D92092
2c196bbc6b asserted that
`SmallVector::push_back` doesn't invalidate the parameter when it needs
to grow. Do the same for `resize`, `append`, `assign`, `insert`, and
`emplace_back`.
Differential Revision: https://reviews.llvm.org/D91744
Treat any identifier as a potential exp target and diagnose them all the
same way as "invalid exp target"s.
Differential Revision: https://reviews.llvm.org/D90947
This change adds a real glc operand to the return atomic
instead of just string " glc" in the middle of the asm
string.
Improves asm parser diagnostics.
Differential Revision: https://reviews.llvm.org/D90730
Pseudo-registers allow different register encodings
between gpu generations. Make sure we resolve the
pseudo regs to real regs whenever we get their
hardware encoding.
Using the correct encodings revealed a register
bank conflict and an unnecessary write dependency.
Tests have been updated to match.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D90721
Change-Id: I73c154cd24aecc820993b50bebaf4df97a5710ca
V_DIV_SCALE_F32/F64 are VOP3B encoded so they can't use the ABS src
modifier, but they can still use NEG and the usual output modifiers.
This partially reverts 3b99f12a4e "AMDGPU: Remove modifiers from v_div_scale_*".
Differential Revision: https://reviews.llvm.org/D90296
This instruction was introduced in GFX10.3, reusing the opcode of
v_mac_legacy_f32 from GFX10.1.
Differential Revision: https://reviews.llvm.org/D89247
Note that all subtargets up to GFX10.1 have v_mad_legacy_f32, but GFX8/9
lack v_mac_legacy_f32. GFX10.3 has no mad/mac f32 instructions at all.
Differential Revision: https://reviews.llvm.org/D88890
Introduce a utility function to make it more
convenient to write code that is the same on
the GFX9 and GFX10 subtargets.
Use isGFX9Plus in the AsmParser for AMDGPU.
Authored By: Joe_Nash
Differential Revision: https://reviews.llvm.org/D88908
Summary of changes:
- Changed parser to eliminate generation of excessive error messages;
- Corrected lit tests to match all expected error messages;
- Corrected lit tests to guard against unwanted extra messages (added option "--implicit-check-not=error:");
- Added missing checks and fixed some typos in tests.
See bug 46907: https://bugs.llvm.org/show_bug.cgi?id=46907
Reviewers: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D86940
Currently supported LLVM MTBUF syntax is shown below. It is not compatible with SP3.
op dst, addr, rsrc, FORMAT, soffset
This change adds support for SP3 syntax:
op dst, addr, rsrc, soffset SP3FORMAT
In addition to being compatible with SP3, this syntax allows using symbolic names for data, numeric and unified formats. Below is a list of added syntax variants.
format:<expression>
format:[<numeric-format-name>,<data-format-name>]
format:[<data-format-name>,<numeric-format-name>]
format:[<data-format-name>]
format:[<numeric-format-name>]
format:[<unified-format-name>]
The last syntax variant is supported for GFX10 only.
See llvm bug 37738
Reviewers: arsenm, rampitec, vpykhtin
Differential Revision: https://reviews.llvm.org/D84026
The hardware has created a real mess in the naming for add/sub, which
have been renamed basically every generation. Switch the carry out
pseudos to have the gfx9/gfx10 names. We were using the original SI/CI
v_add_i32/v_sub_i32 names. Later targets reintroduced these names as
carryless instructions with a saturating clamp bit, which we do not
define. Do this rename so we can unambiguously add these missing
instructions.
The carry-in versions should also be renamed, but at least those had a
consistent _u32 name to begin with. The 16-bit instructions were also
renamed, but aren't ambiguous.
This does regress assembler error message quality in some cases. In
mismatched wave32/wave64 situations, this will switch from
"unsupported instruction" to "invalid operand", with the error
pointing at the wrong position. I couldn't quite follow how the
assembler selects these, but the previous behavior seemed accidental
to me. It looked like there was a partial attempt to handle this which
was never completed (i.e. there is an AMDGPUOperand::isBoolReg but it
isn't used for anything).
Dmitry Preobrazhensky