Given a patch like D129506, using instructions not valid for the current
target feature set becomes an error. This fixes an issue in
ARMExpandPseudo::ExpandCMP_SWAP where Thumb2 compares were used in
Thumb1Only code, such as thumbv8m.baseline targets.
Differential Revision: https://reviews.llvm.org/D129695
These instructions are only available when fp is available, so cannot be
used with just +mve. Add predicates to ensure we fall-back under the
right circumstances.
I can't remove the function just yet as it is used in the generated .inc files.
I would also like to provide a way to compare alignment with TypeSize since it came up a few times.
Differential Revision: https://reviews.llvm.org/D126910
Previous we used sra (X, size(X)-1); xor (add (X, Y), Y).
By placing sub at the end, we allow RISCV to combine sign_extend_inreg
with it to form subw.
Some X86 tests for Z - abs(X) seem to have improved as well.
Other targets look to be a wash.
I had to modify ARM's abs matching code to match from sub instead of
xor. Maybe instead ISD::ABS should be made legal. I'll try that in
parallel to this patch.
This is an alternative to D119099 which was focused on RISCV only.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D119171
This is a very small addition to the existing MVE fixed point vcvt code
to also create them from FP_TO_SINT_SAT and FP_TO_UINT_SAT nodes, which
should be equally valid for native saturating converts under MVE.
Differential Revision: https://reviews.llvm.org/D114360
Soft deprecrate isNullValue/isAllOnesValue and update in tree
callers. This matches the changes to the APInt interface from
D109483.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D109535
The semantics of tail predication loops means that the value of LR as an
instruction is executed determines the predicate. In other words:
mov r3, #3
DLSTP lr, r3 // Start tail predication, lr==3
VADD.s32 q0, q1, q2 // Lanes 0,1 and 2 are updated in q0.
mov lr, #1
VADD.s32 q0, q1, q2 // Only first lane is updated.
This means that the value of lr cannot be spilled and re-used in tail
predication regions without potentially altering the behaviour of the
program. More lanes than required could be stored, for example, and in
the case of a gather those lanes might not have been setup, leading to
alignment exceptions.
This patch adds a new lr predicate operand to MVE instructions in order
to keep a reference to the lr that they use as a tail predicate. It will
usually hold the zeroreg meaning not predicated, being set to the LR phi
value in the MVETPAndVPTOptimisationsPass. This will prevent it from
being spilled anywhere that it needs to be used.
A lot of tests needed updating.
Differential Revision: https://reviews.llvm.org/D107638
Some of the Arm complex pattern functions call canExtractShiftFromMul,
which can modify the DAG in-place. For this to be valid and handled
successfully we need to define ComplexPatternFuncMutatesDAG.
Differential Revision: https://reviews.llvm.org/D107476
Much like fixed-point to floating-point conversion, the converse can
also be transformed into a fixed-point VCVT. This patch transforms
multiplications of floating point numbers by 2^n into a VCVT_fix. The
exception is that a float to fixed conversion with 1 fractional bit
ends up being an FADD (FADD(x, x) emulates FMUL(x, 2)) rather than an FMUL so there is a special case for that. This patch also moves the code from https://reviews.llvm.org/D103903 into a separate function as fixed to float and float to fixed are very similar.
Differential Revision: https://reviews.llvm.org/D104793
Conversion from a fixed-point number to a floating-point number is done by
multiplying the fixed-point number by 2^(-n) where n is the number of
fractional bits. Currently this is lowered to a vcvt
(integer to floating-point) then a vmul, but it can instead be lowered
directly to a vcvt (fixed-point to floating-point). This patch enables
such transformations as long as the multiplication factor is a power of 2.
Differential Revision: https://reviews.llvm.org/D103903
We currently prefer t2CMPrs over t2CMPri when the node contains a shift.
This can introduce more nodes if the shift has multiple uses though, as
value from the shift will be needed anyway, and in the case of a t2CMPri
compared with zero will more readily be removed entirely.
Differential Revision: https://reviews.llvm.org/D101688
Based on the same for AArch64: 4751cadcca
At -O0, the fast register allocator may insert spills between the ldrex and
strex instructions inserted by AtomicExpandPass when expanding atomicrmw
instructions in LL/SC loops. To avoid this, expand to cmpxchg loops and
therefore expand the cmpxchg pseudos after register allocation.
Required a tweak to ARMExpandPseudo::ExpandCMP_SWAP to use the 4-byte encoding
of UXT, since the pseudo instruction can be allocated a high register (R8-R15)
which the 2-byte encoding doesn't support. However, the 4-byte encodings
are not present for ARM v8-M Baseline. To enable this, two new pseudos are
added for Thumb which are only valid for v8mbase, tCMP_SWAP_8 and
tCMP_SWAP_16.
The previously committed attempt in D101164 had to be reverted due to runtime
failures in the test suites. Rather than spending time fixing that
implementation (adding another implementation of atomic operations and more
divergence between backends) I have chosen to follow the approach taken in
D101163.
Differential Revision: https://reviews.llvm.org/D101898
Depends on D101912
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Originally submitted as 3338290c18.
Reverted in c7df6b1223.
Similarly to D101096, this makes sure that MMO operands get propagated
through from MVE gathers/scatters to the Machine Instructions. This
allows extra scheduling freedom, not forcing the instructions to act as
scheduling barriers. We create MMO's with an unknown size, specifying
that they can load from anywhere in memory, similar to the masked_gather
or X86 intrinsics.
Differential Revision: https://reviews.llvm.org/D101219
We create MMO's for the VLDn/VSTn intrinsics in ARMTargetLowering::
getTgtMemIntrinsic, but they do not currently make it ll the way through
ISel. This changes that in the various places it needs changing, making
sure that the MMO is propagate through to the final instruction. This
can help in scheduling, not treating the VLD2/VST2 as a scheduling
barrier.
Differential Revision: https://reviews.llvm.org/D101096
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Recently we improved the lowering of low overhead loops and tail
predicated loops, but concentrated first on the DLS do style loops. This
extends those improvements over to the WLS while loops, improving the
chance of lowering them successfully. To do this the lowering has to
change a little as the instructions are terminators that produce a value
- something that needs to be treated carefully.
Lowering starts at the Hardware Loop pass, inserting a new
llvm.test.start.loop.iterations that produces both an i1 to control the
loop entry and an i32 similar to the llvm.start.loop.iterations
intrinsic added for do loops. This feeds into the loop phi, properly
gluing the values together:
%wls = call { i32, i1 } @llvm.test.start.loop.iterations.i32(i32 %div)
%wls0 = extractvalue { i32, i1 } %wls, 0
%wls1 = extractvalue { i32, i1 } %wls, 1
br i1 %wls1, label %loop.ph, label %loop.exit
...
loop:
%lsr.iv = phi i32 [ %wls0, %loop.ph ], [ %iv.next, %loop ]
..
%iv.next = call i32 @llvm.loop.decrement.reg.i32(i32 %lsr.iv, i32 1)
%cmp = icmp ne i32 %iv.next, 0
br i1 %cmp, label %loop, label %loop.exit
The llvm.test.start.loop.iterations need to be lowered through ISel
lowering as a pair of WLS and WLSSETUP nodes, which each get converted
to t2WhileLoopSetup and t2WhileLoopStart Pseudos. This helps prevent
t2WhileLoopStart from being a terminator that produces a value,
something difficult to control at that stage in the pipeline. Instead
the t2WhileLoopSetup produces the value of LR (essentially acting as a
lr = subs rn, 0), t2WhileLoopStart consumes that lr value (the Bcc).
These are then converted into a single t2WhileLoopStartLR at the same
point as t2DoLoopStartTP and t2LoopEndDec. Otherwise we revert the loop
to prevent them from progressing further in the pipeline. The
t2WhileLoopStartLR is a single instruction that takes a GPR and produces
LR, similar to the WLS instruction.
%1:gprlr = t2WhileLoopStartLR %0:rgpr, %bb.3
t2B %bb.1
...
bb.2.loop:
%2:gprlr = PHI %1:gprlr, %bb.1, %3:gprlr, %bb.2
...
%3:gprlr = t2LoopEndDec %2:gprlr, %bb.2
t2B %bb.3
The t2WhileLoopStartLR can then be treated similar to the other low
overhead loop pseudos, eventually being lowered to a WLS providing the
branches are within range.
Differential Revision: https://reviews.llvm.org/D97729
This removes the existing patterns for inserting two lanes into an
f16/i16 vector register using VINS, instead using a DAG combine to
pattern match the same code sequences. The tablegen patterns were
already on the large side (foreach LANE = [0, 2, 4, 6]) and were not
handling all the cases they could. Moving that to a DAG combine, whilst
not less code, allows us to better control and expand the selection of
VINSs. Additionally this allows us to remove the AddedComplexity on
VCVTT.
The extra trick that this has learned in the process is to move two
adjacent lanes using a single f32 vmov, allowing some extra
inefficiencies to be removed.
Differenial Revision: https://reviews.llvm.org/D96876
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Differential Revision: https://reviews.llvm.org/D70072
This reverts commit 8a12553223.
A bug has been found when generating code for Thumb2. In some very
specific cases, the prologue/epilogue emitter generates erroneous stack
offsets for the new LDRD instructions that access the stack.
This bug does not seem to be caused by the reverted patch though. Likely
the latter has made an undiscovered issue emerge in the
prologue/epilogue emission pass. Nevertheless, this reversion is
necessary since it is blocking users of the ARM backend.
Summary:
This change implements ACLE CDE intrinsics that translate to
instructions working with general-purpose registers.
The specification is available at
https://static.docs.arm.com/101028/0010/ACLE_2019Q4_release-0010.pdf
Each ACLE intrinsic gets a corresponding LLVM IR intrinsic (because
they have distinct function prototypes). Dual-register operands are
represented as pairs of i32 values. Because of this the instruction
selection for these intrinsics cannot be represented as TableGen
patterns and requires custom C++ code.
Reviewers: simon_tatham, MarkMurrayARM, dmgreen, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76296
This changes the way that asrl and lsrl intrinsics are lowered, going
via a the ISEL ASRL and LSLL nodes instead of straight to machine nodes.
On top of that, it adds some constant folds for long shifts, in case it
turns out that the shift amount was either constant or 0.
Differential Revision: https://reviews.llvm.org/D75553
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: danielkiss, alanphipps, hans, nathanchance, nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
Summary:
The VSHLC instruction performs a left shift of a whole vector register
by an immediate shift count up to 32, shifting in new bits at the low
end from a GPR and delivering the shifted-out bits from the high end
back into the same GPR.
Since the instruction produces two outputs (the shifted vector
register and the output GPR of shifted-out bits), it has to be
instruction-selected in C++ rather than Tablegen.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75445
Summary:
These are exactly parallel to the existing `vadciq` intrinsics, which
we implemented last year as part of the original MVE intrinsics
framework setup.
Just like VADC/VADCI, the MVE VSBC/VSBCI instructions deliver two
outputs, both of which the intrinsic exposes: a modified vector
register and a carry flag. So they have to be instruction-selected in
C++ rather than Tablegen. However, in this case, that's trivial: the
same C++ isel routine we already have for VADC works unchanged, and
all we have to do is to pass it a different instruction id.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75444
Summary:
These instructions generate a vector of consecutive elements starting
from a given base value and incrementing by 1, 2, 4 or 8. The `wdup`
versions also wrap the values back to zero when they reach a given
limit value. The instruction updates the scalar base register so that
another use of the same instruction will continue the sequence from
where the previous one left off.
At the IR level, I've represented these instructions as a family of
target-specific intrinsics with two return values (the constructed
vector and the updated base). The user-facing ACLE API provides a set
of intrinsics that throw away the written-back base and another set
that receive it as a pointer so they can update it, plus the usual
predicated versions.
Because the intrinsics return two values (as do the underlying
instructions), the isel has to be done in C++.
This is the first family of MVE intrinsics that use the `imm_1248`
immediate type in the clang Tablegen framework, so naturally, I found
I'd given it the wrong C integer type. Also added some tests of the
check that the immediate has a legal value, because this is the first
time those particular checks have been exercised.
Finally, I also had to fix a bug in MveEmitter which failed an
assertion when I nested two `seq` nodes (the inner one used to extract
the two values from the pair returned by the IR intrinsic, and the
outer one put on by the predication multiclass).
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73357
The MVE_VLDRWU32_qi_pre gather loads, like the other _pre/_post mve
loads returns the writeback as result 0, the value as result 1. The llvm
ir intrinsic seems to have this the other way around though, and so when
lowering from one to the other we need to switch the first two outputs.
I've also fixed up the types of _pre/_post on normal MVE loads. There we
were already getting the values the right way around, just not for the
types. I don't believe this was causing anything to go wrong, but it was
very confusing to read in the debug output.
Differential Revision: https://reviews.llvm.org/D73370
This adds Post inc variants of the VLD2/4 and VST2/4 instructions in
MVE. It uses the same mechanism/nodes as Neon, transforming the
intrinsic+add pair into a ARMISD::VLD2_UPD, which gets selected to a
post-inc instruction. The code to do that is mostly taken from the
existing Neon code, but simplified as less variants are needed.
It also fills in some getTgtMemIntrinsic for the arm.mve.vld2/4
instrinsics, which allow the nodes to have MMO's, calculated as the full
length to the memory being loaded/stored.
Differential Revision: https://reviews.llvm.org/D71194
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
This allows us to delete InlineAsm::Constraint_i workarounds in
SelectionDAGISel::SelectInlineAsmMemoryOperand overrides and
TargetLowering::getInlineAsmMemConstraint overrides.
They were introduced to X86 in r237517 to prevent crashes for
constraints like "=*imr". They were later copied to other targets.
David Green