Use load32_zero instead of load32_splat to load the low 32 bits from memory to
v128. Test cases are added to cover this change.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D134257
Refactor the tablegen definitions for relaxed SIMD min/max instructions to use a
shared RelaxedBinary multiclass modeled on the existing SIMDBinary multiclass. A
future commit will add further instruction definitions that use RelaxedBinary.
Also rename the SIMD_RELAXED_CONVERT multiclass to RelaxedConvert to better fit
existing naming conventions.
Reviewed By: aheejin
Differential Revision: https://reviews.llvm.org/D127157
Fix the instruction names to match the WebAssembly spec:
- `i32x4.trunc_sat_zero_f64x2_{s,u}` => `i32x4.trunc_sat_f64x2_{s,u}_zero`
- `f32x4.demote_zero_f64x2` => `f32x4.demote_f64x2_zero`
Also rename related things like intrinsics, builtins, and test functions to
match.
Reviewed By: aheejin
Differential Revision: https://reviews.llvm.org/D121661
When possible, optimize TRUNCATE to generate Wasm SIMD narrow
instructions (i16x8.narrow_i32x4_u, i8x16.narrow_i16x8_u), rather than generate
lots of extract_lane and replace_lane.
Closes#50350.
Add i32x4.relaxed_trunc_f32x4_s, i32x4.relaxed_trunc_f32x4_u,
i32x4.relaxed_trunc_f64x2_s_zero, i32x4.relaxed_trunc_f64x2_u_zero.
These are only exposed as builtins, and require user opt-in.
Differential Revision: https://reviews.llvm.org/D112186
Add relaxed. f32x4.min, f32x4.max, f64x2.min, f64x2.max. These are only
exposed as builtins, and require user opt-in.
Differential Revision: https://reviews.llvm.org/D112146
Add i8x16 relaxed_swizzle instructions. These are only
exposed as builtins, and require user opt-in.
Differential Revision: https://reviews.llvm.org/D112022
Previously extra wide v4f32 to v4f64 extending loads would be legalized to v2f32
to v2f64 extending loads, which would then be scalarized by legalization. (v2f32
to v2f64 extending loads not produced by legalization were already being emitted
correctly.) Instead, mark v2f32 to v2f64 extending loads as legal and explicitly
lower them using promote_low. This regresses the addressing modes supported for
the extloads not produced by legalization, but that's a fine trade off for now.
Differential Revision: https://reviews.llvm.org/D108496
Partially reverts 85157c0079, which had removed these builtins and intrinsics
in favor of normal codegen patterns. It turns out that it is possible for the
patterns to be split over multiple basic blocks, however, which means that DAG
ISel is not able to select them to the pmin/pmax instructions. To make sure the
SIMD intrinsics generate the correct instructions in these cases, reintroduce
the clang builtins and corresponding LLVM intrinsics, but also keep the normal
pattern matching as well.
Differential Revision: https://reviews.llvm.org/D108387
The default legalization of unsupported vector types is to promote the integers
in each lane, which leads to extra sign or zero extending and masking when
moving data into and out of vectors. Switch our preferred type legalization from
the default to vector widening, which keeps the data in the low lanes of the
vector rather than in the low bits of each lane. The unused high lanes can be
ignored.
Half-wide vectors are now loaded from memory into the low 64 bits of the v128
rather than spread out among the lanes. As a result, v128.load64_splat is a much
more common operation, so add new patterns to support it.
Differential Revision: https://reviews.llvm.org/D107502
Replace the clang builtins and LLVM intrinsics for the SIMD extmul instructions
with normal codegen patterns.
Differential Revision: https://reviews.llvm.org/D106724
Replace the clang builtins and LLVM intrinsics for {f32x4,f64x2}.{pmin,pmax}
with standard codegen patterns. Since wasm_simd128.h uses an integer vector as
the standard single vector type, the IR for the pmin and pmax intrinsic
functions contains bitcasts that would not be there otherwise. Add extra codegen
patterns that can still select the pmin and pmax instructions in the presence of
these bitcasts.
Differential Revision: https://reviews.llvm.org/D106612
Replace the experimental clang builtins and LLVM intrinsics for these
instructions with normal instruction selection patterns. The wasm_simd128.h
intrinsics header was already using portable code for the corresponding
intrinsics, so now it produces the correct instructions.
Differential Revision: https://reviews.llvm.org/D106400
Replace the experimental clang builtins and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50435.
Differential Revision: https://reviews.llvm.org/D106019
Replace the experimental clang builtin and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50433.
Differential Revision: https://reviews.llvm.org/D105950
Replace the clang builtin function and LLVM intrinsic for
f32x4.demote_zero_f64x2 with combines from normal SDNodes. Also add missing
combines for i32x4.trunc_sat_zero_f64x2_{s,u}, which share the same pattern.
Differential Revision: https://reviews.llvm.org/D105755
Replace the clang builtin function and LLVM intrinsic previously used to select
the f64x2.promote_low_f32x4 instruction with custom combines from standard
SelectionDAG nodes. Implement the new combines to share code with the similar
combines for f64x2.convert_low_i32x4_{s,u}. Resolves PR50232.
Differential Revision: https://reviews.llvm.org/D105675
WebAssembly's shift instructions implicitly masks the shift count, so optimize
out redundant explicit masks of the shift count. For vector shifts, this
currently only works if the mask is applied before splatting the shift count,
but this should be addressed in a future commit. Resolves PR49655.
Differential Revision: https://reviews.llvm.org/D105600
Previously we used an i32 constant to store the saturation width, but i32 isn't
legal on RISCV64. This wasn't a big deal to fix, but it is extra work for the
type legalizer.
This patch uses a VTSDNode to store the type similar to SEXT_INREG. This makes
it opaque to the type legalizer.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101262
We previously used splats instead of v128.const to materialize vector constants
because V8 did not support v128.const. Now that V8 supports v128.const, we can
use v128.const instead. Although this increases code size, it should also
increase performance (or at least require fewer engine-side optimizations), so
it is an appropriate change to make.
Differential Revision: https://reviews.llvm.org/D100716
Use the target-independent @llvm.fptosi and @llvm.fptoui intrinsics instead.
This includes removing the instrinsics for i32x4.trunc_sat_zero_f64x2_{s,u},
which are now represented in IR as a saturating truncation to a v2i32 followed by
a concatenation with a zero vector.
Differential Revision: https://reviews.llvm.org/D100596
Removes the builtins and intrinsics used to opt in to using these instructions
and replaces them with normal ISel patterns now that they are no longer
prototypes.
Differential Revision: https://reviews.llvm.org/D100402
Add a custom DAG combine and ISD opcode for detecting patterns like
(uint_to_fp (extract_subvector ...))
before the extract_subvector is expanded to ensure that they will ultimately
lower to f64x2.convert_low_i32x4_{s,u} instructions. Since these instructions
are no longer prototypes and can now be produced via standard IR, this commit
also removes the target intrinsics and builtins that had been used to prototype
the instructions.
Differential Revision: https://reviews.llvm.org/D100425
Now that these instructions are no longer prototypes, we do not need to be
careful about keeping them opt-in and can use the standard LLVM infrastructure
for them. This commit removes the bespoke intrinsics we were using to represent
these operations in favor of the corresponding target-independent intrinsics.
The clang builtins are preserved because there is no standard way to easily
represent these operations in C/C++.
For consistency with the scalar codegen in the Wasm backend, the intrinsic used
to represent {f32x4,f64x2}.nearest is @llvm.nearbyint even though
@llvm.roundeven better captures the semantics of the underlying Wasm
instruction. Replacing our use of @llvm.nearbyint with use of @llvm.roundeven is
left to a potential future patch.
Differential Revision: https://reviews.llvm.org/D100411
In the final SIMD spec, there is only a single v128.any_true instruction, rather
than one for each lane interpretation because the semantics do not depend on the
lane interpretation.
Differential Revision: https://reviews.llvm.org/D100241
Removes the prototype builtin and intrinsic for i64x2.eq and implements that
instruction as well as the other i64x2 comparison instructions in the final SIMD
spec. Unsigned comparisons were not included in the final spec, so they still
need to be scalarized via a custom lowering.
Differential Revision: https://reviews.llvm.org/D99623
When I updated the SIMD opcodes in f5764a8654, I accidentally missed updating
i8x16.popcnt. This patch fixes the omission.
Differential Revision: https://reviews.llvm.org/D99536
Updates the names (e.g. widen => extend, saturate => sat) and opcodes of all
SIMD instructions to match the finalized SIMD spec. Deliberately does not change
the public interface in wasm_simd128.h yet; that will require more care.
Depends on D98466.
Differential Revision: https://reviews.llvm.org/D98676
Removes the instruction definitions, intrinsics, and builtins for qfma/qfms,
signselect, and prefetch instructions, which were not included in the final
WebAssembly SIMD spec.
Depends on D98457.
Differential Revision: https://reviews.llvm.org/D98466
Now that the WebAssembly SIMD specification is finalized and engines are
generally up-to-date, there is no need for a separate target feature for gating
SIMD instructions that engines have not implemented. With this change,
v128.const is now enabled by default with the simd128 target feature.
Differential Revision: https://reviews.llvm.org/D98457
Fixes TableGen parser errors reported by D95874 due to incompatible types being used on multiclass templates.
Differential Revision: https://reviews.llvm.org/D96205
As proposed in https://github.com/WebAssembly/simd/pull/380. This commit makes
the new instructions available only via clang builtins and LLVM intrinsics to
make their use opt-in while they are still being evaluated for inclusion in the
SIMD proposal.
Depends on D93771.
Differential Revision: https://reviews.llvm.org/D93775
This commit is a follow-on to c2c2e9119e73, using the `Vec` records introduced
in that commit in the rest of the SIMD instruction definitions. Also removes
unnecessary types in output patterns.
Differential Revision: https://reviews.llvm.org/D93771
Introduce `Vec` records, each bundling all information related to a single SIMD
lane interpretation. This lets TableGen definitions take a single Vec parameter
from which they can extract information rather than taking multiple redundant
parameters. This commit refactors all of the SIMD load and store instruction
definitions to use the new `Vec`s. Subsequent commits will similarly refactor
additional instruction definitions.
Differential Revision: https://reviews.llvm.org/D93660
Fanchen Kong