D85703 will need to create shallow wrappers in order to track the spmd icv. We need to make it available.
Differential Revision: https://reviews.llvm.org/D89342
As we handle callback calls we need to disambiguate the call site
argument number from the callee argument number. While always equal in
non-callback calls, a callback comes with a partial parameter-argument
mapping so there is no implicit correspondence. Here we split
`IRPosition::getArgNo()` into two public functions, `getCallSiteArgNo()`
and `getCalleeArgNo()`. Usages are adjusted to pick the right one for
their purpose. This fixed some problems that would have been exposed as
we more aggressively optimize callbacks.
While operand bundles carry unpredictable semantics, we know some of
them and can therefore "ignore" them. In this case we allow to look at
the declaration of `llvm.assume` when asked for the attributes at a call
site. The assume operand bundles we have do not invalidate the
declaration attributes.
We cannot test this in isolation because the llvm.assume attributes are
determined by the parser. However, a follow up patch will provide test
coverage.
In `MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4.cpp` we initialized
attributes until stack frame ~35k caused space to run out. The initial
size 1024 is pretty much random.
The CloneFunctionInto has implicit requirements with regards to the
linkage and visibility of the function. We now update these after we did
the CloneFunctionInto on the copy with the same linkage and visibility
as the original.
Deleting or replacing anything is certainly a modification. This caused
a later assertion in IPSCCP when compiling 400.perlbench with the new PM.
I'm not sure how to test this.
The problem with module slice has been addressed in D86319
Introduce two new AAs. AAICVTrackerFunctionReturned which checks if a
function can have a unique ICV value after it is finished, and
AAICVCallSiteReturned which checks AAICVTrackerFunctionReturned for a
call site. This enables us to check the value of a call and if it
changes the ICV. This also changes the approach in
`getReplacementValues()` to a worklist-based approach so we can explore
all relevant BBs.
Differential Revision: https://reviews.llvm.org/D85544
Summary:
The module slice describes which functions we can analyze and transform
while working on an SCC as part of the Attributor-CGSCC pass. So far we
simply restricted it to the SCC.
Reviewers: jdoerfert
Differential Revision: https://reviews.llvm.org/D86319
Even though `noundef` IR attribute might be attached to non-void type values, AANoUndef is mistakenly identified for pointer type values only.
This patch fixes that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86737
If we query an AA with `Attributor::getAAFor` in `AbstractAttribute::manifest`, the AA may be updated.
This patch makes use of the phase flag in Attributor, and handle `getAAFor` behavior according to the flag.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86635
Add a new flag that indicates which stage in the process we are in.
This flag is introduced for handling behavior of `getAAFor` according to the stage. (discussed in D86635)
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86678
Currently, an undef value is reduced to 0 when it is added to a set of potential values.
This patch introduces a flag for under values. By this, for example, we can merge two states `{undef}`, `{1}` to `{1}` (because we can reduce the undef to 1).
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85592
- Adds a command line option to seed only selected functions.
- Makes seed allow listing exclusive to assertions enabled builds.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D86129
This commits breaks certain OpenMP codes (on power) because it expanded
the Attributor scope without telling the Attributor about the SCC
extend. See: https://reviews.llvm.org/D85544#2227611
This reverts commit b0b32e6490.
Introduce two new AAs. AAICVTrackerFunctionReturned which checks if a
function can have a unique ICV value after it is finished, and
AAICVCallSiteReturned which checks AAICVTrackerFunctionReturned for a
call site. This enables us to check the value of a call and if it
changes the ICV. This also changes the approach in
`getReplacementValues()` to a worklist-based approach so we can explore
all relevant BBs.
Differential Revision: https://reviews.llvm.org/D85544
This patch introduces a new abstract attribute `AANoUndef` which corresponds to `noundef` IR attribute and deduce them.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85184
When adding elements when iterating, the iterator will become
valid, which could cause errors. This fixes the issue by using
indexes instead of iterator.
This patch internalize non-exact functions and replaces of their uses
with the internalized version. Doing this enables the analysis of
non-exact functions.
We can do this because some non-exact functions with the same name
whose linkage is `linkonce_odr` or `weak_odr` should have the same
semantics, so we can safely internalize and replace use of them (the
result of the other version of this function should be the same.).
Note that not all functions can be internalized, e.g., function with
`linkonce` or `weak` linkage.
For now when specified in commandline, we internalize all functions
that meet the requirements without calculating the cost of such
internalzation.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84167
This is a split patch of D80991.
This patch introduces AAPotentialValues and its interface only.
For more detail of AAPotentialValues abstract attribute, see the original patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83283
This is a split patch of D80991.
This patch introduces AAPotentialValues and its interface only.
For more detail of AAPotentialValues abstract attribute, see the original patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83283
This patch addes time trace functionality to have a better understanding
of the analysis times.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84980
This patch added dependency graph to the attributor so that we can dump the dependencies between AAs more easily. We can also apply general graph algorithms to the graph, making it easier for us to create deep wrappers.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D78861
Summary: This patch added dependency graph to the attributor so that we can dump the dependencies between AAs more easily. We can also apply general graph algorithms to the graph, making it easier for us to create deep wrappers.
Reviewers: jdoerfert, sstefan1, uenoku, homerdin, baziotis
Reviewed By: jdoerfert
Subscribers: jfb, okura, mgrang, kuter, lebedev.ri, hiraditya, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78861
Summary: This patch added dependency graph to the attributor so that we can dump the dependencies between AAs more easily. We can also apply general graph algorithms to the graph, making it easier for us to create deep wrappers.
Reviewers: jdoerfert, sstefan1, uenoku, homerdin, baziotis
Reviewed By: jdoerfert
Subscribers: jfb, okura, mgrang, kuter, lebedev.ri, hiraditya, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78861
Summary: The `getIdAddr()` function returns the address of the ID of the abstract attribute
Reviewers: jdoerfert, sstefan1, uenoku, homerdin, baziotis
Reviewed By: jdoerfert
Subscribers: okura, hiraditya, uenoku, kuter, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83172
Summary: The patch D81022 seems to break the indentation of the `cleanupIR()` function. This patch fixes this problem
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: jdoerfert
Subscribers: hiraditya, uenoku, kuter, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82260
Summary:
This patch splits the Attributor::run() function into multiple
functions.
Simple Logic changes to make this possible:
# Moved iteration count verification earlier.
# NumFinalAAs get set a little bit later.
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: jdoerfert
Subscribers: hiraditya, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81022
Summary:
This patch splits the Attributor::run() function into multiple functions.
Simple Logic changes to make this possible:
# Moved iteration count verification earlier.
# NumFinalAAs get set a little bit later.
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: jdoerfert
Subscribers: hiraditya, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81022
Remove the function Instruction::setProfWeight() and make
use of Instruction::copyMetadata(.., {LLVMContext::MD_prof}).
This is correct for all use cases of setProfWeight() as it
is applied to CallBase instructions only.
This change results in prof metadata copied intact even if
the source has "VP". The old pair of calls
extractProfTotalWeight() + setProfWeight() resulted in
setting branch_weights if the source had "VP" data.
Reviewers: yamauchi, davidxl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80987
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
We will now ensure ensure the return type of called function is the type
of all call sites we are going to rewrite. This avoids a problem
partially fixed by D79680. The part that was not covered is a use of
this "weird" casted call site (see `@func3` in `misc_crash.ll`).
misc_crash.ll checks are auto-generated now.
The old QuerriedAAs contained two vectors, one for required one for
optional dependences (=queries). We now use a single vector and encode
the kind directly in the pointer.
This reduces memory consumption and makes the connection between
abstract attributes and their dependences clearer.
No functional change is intended, changes in the test are due to
different order in the query map. Neither the order before nor now is in
any way special.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 543734 (329735/s)
temporary memory allocations: 105895 (64217/s)
peak heap memory consumption: 19.19MB
peak RSS (including heaptrack overhead): 102.26MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 513292 (341511/s)
temporary memory allocations: 106028 (70544/s)
peak heap memory consumption: 13.35MB
peak RSS (including heaptrack overhead): 95.64MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: -30442 (208506/s)
temporary memory allocations: 133 (-910/s)
peak heap memory consumption: -5.84MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
---
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D78729
In a recent patch we introduced a problem with abstract attributes that
were assumed dead at some point. Since `Attributor::updateAA` was
introduced in 95e0d28b71, we did not
remember the dependence on the liveness AA when an abstract attribute
was assumed dead and therefore not updated.
Explicit reproducer added in liveness.ll.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 509242 (345483/s)
temporary memory allocations: 98666 (66937/s)
peak heap memory consumption: 18.60MB
peak RSS (including heaptrack overhead): 103.29MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 529332 (355494/s)
temporary memory allocations: 102107 (68574/s)
peak heap memory consumption: 19.40MB
peak RSS (including heaptrack overhead): 102.79MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: 20090 (1339333/s)
temporary memory allocations: 3441 (229400/s)
peak heap memory consumption: 801.45KB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
Before we eagerly put dependences into the QueryMap as soon as we
encountered them (via `Attributor::getAAFor<>` or
`Attributor::recordDependence`). Now we will wait to see if the
dependence is useful, that is if the target is not already in a fixpoint
state at the end of the update. If so, there is no need to record the
dependence at all.
Due to the abstraction via `Attributor::updateAA` we will now also treat
the very first update (during attribute creation) as we do subsequent
updates.
Finally this resolves the problematic usage of QueriedNonFixAA.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 554675 (389245/s)
temporary memory allocations: 101574 (71280/s)
peak heap memory consumption: 28.46MB
peak RSS (including heaptrack overhead): 116.26MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 512465 (345559/s)
temporary memory allocations: 98832 (66643/s)
peak heap memory consumption: 22.54MB
peak RSS (including heaptrack overhead): 106.58MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: -42210 (-727758/s)
temporary memory allocations: -2742 (-47275/s)
peak heap memory consumption: -5.92MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
If we have a dependence between an abstract attribute A to an abstract
attribute B such hat changes in A should trigger an update of B, we do
not need to keep the dependence around once the update was triggered. If
the dependence is still required the update will reinsert it into the
dependence map, if it is not we avoid triggering B in the future. This
replaces the "recompute interval" mechanism we used before to prune
stale dependences.
Number of required iterations is generally down, compile time for the
module pass (not really the CGSCC pass) is down quite a bit.
There is one test change which looks like an artifact in the undefined
behavior AA that needs to be looked at.
We now also use the BumpPtrAllocator from the Attributor in the
InformationCache. The lifetime of objects in either is pretty much the
same and it should result in consistently good performance regardless of
the allocator.
Doing so requires to call more constructors manually but so far that
does not seem to be problematic or messy.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 615359 (368257/s)
temporary memory allocations: 83315 (49859/s)
peak heap memory consumption: 75.64MB
peak RSS (including heaptrack overhead): 163.43MB
total memory leaked: 269.04KB
```
After:
```
calls to allocation functions: 613042 (359555/s)
temporary memory allocations: 83322 (48869/s)
peak heap memory consumption: 75.64MB
peak RSS (including heaptrack overhead): 162.92MB
total memory leaked: 269.04KB
```
Difference:
```
calls to allocation functions: -2317 (-68147/s)
temporary memory allocations: 7 (205/s)
peak heap memory consumption: 2.23KB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
---
There are also some adjustments to use MaybeAlign in here due
to CallBase::getParamAlignment() being deprecated. It would
be cleaner if getOrEnforceKnownAlignment was migrated
to Align/MaybeAlign.
Differential Revision: https://reviews.llvm.org/D78345
CallSite will likely be removed soon, but AbstractCallSite serves a different purpose and won't be going away.
This patch switches it to internally store a CallBase* instead of a
CallSite. The only interface changes are the removal of the getCallSite
method and getCallBackUses now takes a CallBase&. These methods had only
a few callers that were easy enough to update without needing a
compatibility shim.
In the future once the other CallSites are gone, the CallSite.h
header should be renamed to AbstractCallSite.h
Differential Revision: https://reviews.llvm.org/D78322
Since we use the fact that some uses are droppable in the Attributor we
need to handle them explicitly when we replace uses. As an example, an
assumed dead value can have live droppable users. In those we cannot
replace the value simply by an undef. Instead, we either drop the uses
(via `dropDroppableUses`) or keep them as they are. In this patch we do
both, depending on the situation. For values that are dead but not
necessarily removed we keep droppable uses around because they contain
information we might be able to use later. For values that are removed
we drop droppable uses explicitly to avoid replacement with undef.
Running the verifier is expensive so we want to avoid it even in runs
that enable assertions. As we move closer to enabling the Attributor
this code will be executed by some buildbots but not cause overhead for
most people.
Before, we eagerly analyzed all the functions to collect information
about them, e.g. what instructions may read/write memory. This had
multiple drawbacks:
- In CGSCC-mode we can end up looking at a callee which is not in the
SCC but for which we need an initialized cache.
- We end up looking at functions that we deem dead and never need to
analyze in the first place.
- We have a implicit dependence which is easy to break.
This patch moves the function analysis into the information cache and
makes it lazy. There is no real functional change expected except due to
the first reason above.
The CallGraphUpdater allows to directly alter call site information and
we should do so. This might appease the windows buildbot that crashes
during the SCC traversal.
Attributor.cpp became quite big and we need to start provide structure.
The Attributor code is now in Attributor.cpp and the classes derived
from AbstractAttribute are in AttributorAttributes.cpp. Minor changes
were required but no intended functional changes.
We also minimized includes as part of this.
Reviewed By: baziotis
Differential Revision: https://reviews.llvm.org/D76873
The new and old pass managers (PassManagerBuilder.cpp and
PassBuilder.cpp) are exposed to an `extern` declaration of
`attributor-disable` option which will guard the addition of the
attributor passes to the pass pipelines.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76871
Query AAValueSimplify on pointers in memory accessing instructions to take
advantage of the constant propagation (or any other value simplification) of such values.
There was a TODO in genericValueTraversal to provide the context
instruction and due to the lack of it users that wanted one just used
something available. Unfortunately, using a fixed instruction is wrong
in the presence of PHIs so we need to update the context instruction
properly.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D76870
This cannot be triggered right now, as far as I know, but it doesn't
make sense to deduce a constant range on arguments of declarations.
Exposed during testing of AAValueSimplify extensions.
Use DL & ABI information for better alignment deduction, e.g., if a type
is accessed and the ABI specifies an alignment requirement for such an
access we can use it. This is based on a patch by @lebedev.ri and
inspired by getBaseAlign in Loads.cpp.
Depends on D76673.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D76674
If we have a must-tail call the callee and caller need to have matching
ABIs. Part of that is alignment which we might modify when we deduce
alignment of arguments of either. Since we would need to keep them in
sync, which is not as simple, we simply avoid deducing alignment for
arguments of the must-tail caller or callee.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D76673
We create a lot of AbstractAttributes and they live as long as
the Attributor does. It seems reasonable to allocate them via a
BumpPtrAllocator owned by the Attributor.
Reviewed By: baziotis
Differential Revision: https://reviews.llvm.org/D76589
Make the attributor pass aware of aligned_alloc for converting heap
allocations to stack ones.
Depends on D76971.
Differential Revision: https://reviews.llvm.org/D76974
Minor update/fixes to comments for the Attributor pass, and dyn_cast -> cast.
Signed-off-by: Uday Bondhugula <uday@polymagelabs.com>
Differential Revision: https://reviews.llvm.org/D76972
This patch integrates operand bundle llvm.assumes [0] with the
Attributor. Most IRAttributes will now look at uses of the associated
value and if there are llvm.assume operand bundle uses with the right
tag we will check if they are in the must-be-executed-context (around
the context instruction). Droppable users, which is currently only
llvm::assume, are handled special in some places now as well.
[0] http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D74888
We special cased must-tail calls all over the place because they cannot
be modified as other calls can be. However, we already centralized the
modification API so we can centralize the handling as well. This
simplifies the code and allows to remove must-tail calls completely.
This patch add mayContainUnboundedCycle helper function which checks whether a function has any cycle which we don't know if it is bounded or not.
Loops with maximum trip count are considered bounded, any other cycle not.
It also contains some fixed tests and some added tests contain bounded and
unbounded loops and non-loop cycles.
Reviewed By: jdoerfert, uenoku, baziotis
Differential Revision: https://reviews.llvm.org/D74691
Resolution for below fixme:
(ii) Check whether the value is captured in the scope using AANoCapture.
FIXME: This is conservative though, it is better to look at CFG and
check only uses possibly executed before this callsite.
Propagates caller argument's noalias attribute to callee.
Reviewed by: jdoerfert, uenoku
Reviewers: jdoerfert, sstefan1, uenoku
Subscribers: uenoku, sstefan1, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D71617
This patch introduces the propagation of known information based on path exploration.
For example,
```
int u(int c, int *p){
if(c) {
return *p;
} else {
return *p + 1;
}
}
```
An argument `p` is dereferenced whatever c's value is.
For an instruction `CtxI`, we accumulate branch instructions in the must-be-executed-context of `CtxI` and then, we take the conjunction of the successors' known state.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D65593
It is possible that an instruction to be changed to unreachable is
in the same block with a terminator that can be constant-folded.
In this case, as of now, the instruction will be changed to
unreachable before the terminator is folded. But, then the
whole BB becomes invalidated and so when we go ahead to fold
the terminator, we trap.
Change the order of these two.
Differential Revision: https://reviews.llvm.org/D75780
We can look through calls with `returned` argument attributes when we
collect subsuming positions. This allows us to get existing attributes
from more places.
We are often interested in an assumed constant and sometimes it has to
be an integer constant. Before we only looked for the latter, now we can
ask for either.
If we propagate function pointers across function boundaries we can
create new call edges. These need to be represented in the CG if we run
as a CGSCC pass. In the new pass manager that is currently not handled
by the CallGraphUpdater so we need to prevent the situation for now.
We usually will ask for liveness of an argument anyway so we ended up
lazily creating the attribute anyway. However, that is not always the
case and even if it is we should go the eager route here. Various tests
show how this can improve the outcome. One test exposed a problem with
type mismatches between argument and call site argument, a fix is
included. For liveness various more tests were added as well.
If a function pointer is casted into a different type the resulting
expression can be a constant. If so, it can be used multiple times which
cannot be handled by the AbstractCallSite constructor alone. Instead, we
follow the cast expression uses now explicitly during the call site
traversal.
In addition to a single bit per memory locations, e.g., globals and
arguments, we now collect more information about the actual accesses,
e.g., what instruction caused it, was it a read/write/read+write, and
what the underlying base pointer was. Follow up patches will make
explicit use of this.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D73527
While the function return updateImpl did only look at call sites the
manifest method looked at return values. If we don't do this during the
updateImpl we might create new abstract attributes during manifest. This
is a problem when it comes to liveness information.
This caused an error when passes iterated over cached assumptions in the
tracker and assumed them to be `null` or an instruction. I failed to
create a test case so far.
In addition to memory behavior attributes (readonly/writeonly) we now
derive memory location attributes (argmemonly/inaccessiblememonly/...).
The former is part of AAMemoryBehavior and the latter part of
AAMemoryLocation. While they are similar in nature it got messy when
they were put in a single AA. Location attributes for arguments and
floating values will follow later.
Note that both memory attributes kinds can derive readnone. If there are
no accesses AAMemoryBehavior will derive readnone. If there are accesses
but only to stack (=local) locations AAMemoryLocation will derive
readnone.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D73426
Due to the genericValueTraversal we might visit values for which we did
not create an AAValueConstantRange object, e.g., as they are behind a
PHI or select or call with `returned` argument. As a consequence we need
to validate the types as we are about to query AAValueConstantRange for
operands.
We used coarse-grained liveness before, thus we looked if the
instruction was executed, but we did not use fine-grained liveness,
hence if the instruction was needed or could be deleted even if the
surrounding ones are live. This patches introduces this level of
liveness checks together with other liveness queries, e.g., for uses.
For more control we enforce that all liveness queries go through the
Attributor.
Test have been adjusted to reflect the changes or augmented to prevent
deletion of the parts we want to check.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D73313
If we have a replacement for a value, via AAValueSimplify, the original
value will lose all its uses. Thus, as long as a value is simplified we
can skip the uses in checkForAllUses, given that these uses are
transitive uses for the simplified version and will therefore affect the
simplified version as necessary.
Since this allowed us to remove calls without side-effects and a known
return value, we need to make sure not to eliminate `musttail` calls.
Those we keep around, or later remove the entire `musttail` call chain.
We relied on wouldInstructionBeTriviallyDead before but that functions
does not take assumed information, especially for calls, into account.
The replacement, AAIsDead::isAssumeSideEffectFree, does.
This change makes AAIsDeadCallSiteReturn more complex as we can have
a dead call or only dead users.
The test have been modified to include a side effect where there was
none in order to keep the coverage.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D73311
As an approximation to a dead edge we can check if the terminator is
dead. If so, the corresponding operand use in a PHI node is dead even if
the PHI node itself is not.
The changeXXXAfterManifest functions are better suited to deal with
changes so we should prefer them. These functions also recursively
delete dead instructions which is why we see test changes.
This is a minimal but important advancement over the existing code. A
cast with an operand that is only used in the cast retains the no-alias
property of the operand.
Traversing PHI nodes is natural with the genericValueTraversal but also
a bit tricky. The problem is similar to the ones we have seen in AAAlign
and AADereferenceable, namely that we continue to increase the range in
each iteration. We use a pessimistic approach here to stop the
iterations. Nevertheless, optimistic information can now be propagated
through a PHI node.
The change is performed as stated by the FIXME and the tests are
adjusted. All changes look fine to me and values can be inferred as
undef without it being an error.
Casts can be handled natively by the ConstantRange class. We do limit it
to extends for now as we assume an integer type in different locations.
A TODO and a test case with a FIXME was added to remove that restriction
in the future.
In addition to the module pass, this patch introduces a CGSCC pass that
runs the Attributor on a strongly connected component of the call graph
(both old and new PM). The Attributor was always design to be used on a
subset of functions which makes this patch mostly mechanical.
The one change is that we give up `norecurse` deduction in the module
pass in favor of doing it during the CGSCC pass. This makes the
interfaces simpler but can be revisited if needed.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D70767
If all call sites are in `norecurse` functions we can derive `norecurse`
as the ReversePostOrderFunctionAttrsPass does. This should make
ReversePostOrderFunctionAttrsLegacyPass obsolete once the Attributor is
enabled.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D72017
If we know that all call sites have been processed we can derive an
early fixpoint. The use in this patch is likely not to trigger right now
but a follow up patch will make use of it.
Reviewed By: uenoku, baziotis
Differential Revision: https://reviews.llvm.org/D72016
Summary:
In a release build this variable becomes unused and may break the build
with `-Werror,-Wunused-variable`.
Reviewers: gribozavr2, jdoerfert, sstefan1
Reviewed By: gribozavr2
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73683
A pointer is privatizeable if it can be replaced by a new, private one.
Privatizing pointer reduces the use count, interaction between unrelated
code parts. This is a first step towards replacing argument promotion.
While we can already handle recursion (unlike argument promotion!) we
are restricted to stack allocations for now because we do not analyze
the uses in the callee.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68852
The helpers AAReturnedFromReturnedValues and
AACallSiteReturnedFromReturned are useful not only to avoid code
duplication but also to avoid recomputation of results. If we have N
call sites we should not recompute the function return information N
times but once. These are mostly straightforward usages with some minor
improvements on the helpers and addition of a new one
(IRPosition::getAssociatedType) that knows about function return types.
There was a TODO in AAValueConstantRangeArgument to reuse
AAArgumentFromCallSiteArguments. We now do this by allowing new States
to be build from the bestState.
If we invalidate an attribute we need to inform all dependent ones even
if the fixpoint state is not invalid. Before we only continued
invalidation if the fixpoint state was invalid, now we signal a change
in case the fixpoint state is valid.
The test case was already included in D71620 but the problem was hiding
because it only manifested with the old PM (for that input).
This patch modularizes the way we check for no-alias call site arguments
by putting the existing logic into helper functions. The reasoning was
not changed but special cases for readonly/readnone were added.
If `null` is not defined we cannot access it, hence the pointer is
`noalias`. While this is not helpful on it's own it simplifies later
deductions that can skip over already known `noalias` pointers in
certain situations.
When we use information only to short-cut deduction or improve it, we
can use OPTIONAL dependences instead of REQUIRED ones to avoid cascading
pessimistic fixpoints.
We also need to track dependences only when we use assumed information,
e.g., we act on assumed liveness information.
It can happen that we have instructions in the ToBeDeletedInsts set
which are deleted earlier already. To avoid dangling pointers we use
weak tracking handles.
When we follow uses, e.g., in AAMemoryBehavior or AANoCapture, we need
to make sure the value is a pointer before we ask for abstract
attributes only valid for pointers. This happens because we follow
pointers through calls that do not capture but may return the value.
We might accidentally ask AAValueSimplify to simplify a void value. That
can lead to very interesting, and very wrong, results. We now handle
this case gracefully.
If alignment was manifested but it is actually only as good as the
data-layout provided one we should not report it as a change.
For testing purposes we still manifest the information.
The utility method RecursivelyDeleteTriviallyDeadInstructions receives
as input a vector of Instructions, where all inputs are valid
instructions. This same vector is used as a scratch storage (per the
header comment) to recursively delete instructions. If an instruction is
added as an operand of multiple other instructions, it may be added twice,
then deleted once, then the second reference in the vector is invalid.
Switch to using a Vector<WeakTrackingVH>.
This change facilitates a clean-up in LoopStrengthReduction.
Summary:
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created in `getAssumedConstant` method when `AAValueSimplify` returns `nullptr`(worst state).
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: phosek, davezarzycki, baziotis, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71620
When we replace instructions with unreachable we delete instructions. We
now avoid dangling pointers to those deleted instructions in the
`ToBeChangedToUnreachableInsts` set. Other modification collections
might need to be updated in the future as well.
If we replace a function with a new one because we rewrite the
signature, dead users may still refer to the old version. With this
patch we reuse the code that deals with dead functions, which the old
versions are, to avoid problems.
An inbounds GEP results in poison if the value is not "inbounds", not in
UB. We accidentally derived nonnull and dereferenceable from these
inbounds GEPs even in the absence of accesses that would make the poison
to UB.
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created when AAValueSimplify cannot
simplify the value.
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D71620
As part of the Attributor manifest we want to change the signature of
functions. This patch introduces a fairly generic interface to do so.
As a first, very simple, use case, we remove unused arguments. A second
use case, pointer privatization, will be committed with this patch as
well.
A lot of the code and ideas are taken from argument promotion and we
run all argument promotion tests through this framework as well.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68765
Since the information is known we can simply use it at the call site.
This is especially useful for callbacks but also helps regular calls.
The test changes are mechanical.
This is the second step after D67871 to make use of abstract call sites.
In this patch the argument we associate with a abstract call site
argument can be the one in the callback callee instead of the one in the
callback broker.
Caveat: We cannot allow no-alias arguments for problematic callbacks:
As described in [1], adding no-alias (or restrict) to arguments could
break synchronization as the synchronization effect, e.g., a barrier,
does not "alias" with the pointer anymore. This disables no-alias
annotation for potentially problematic arguments until we implement the
fix described in [1].
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68008
[1] Compiler Optimizations for OpenMP, J. Doerfert and H. Finkel,
International Workshop on OpenMP 2018,
http://compilers.cs.uni-saarland.de/people/doerfert/par_opt18.pdf
Especially for callbacks, annotating the call site arguments is
important. Doing so exposed a too strong dependence of AAMemoryBehavior
on AANoCapture since we handle the case of potentially captured pointers
explicitly.
The changes to the tests are all mechanical.
Summary: This patch makes `AAValueSimplify` use `changeUsesAfterManifest` in `manifest`. This will invoke simple folding after the manifest.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71972
A branch is considered UB if it depends on an undefined / uninitialized value.
At this point this handles simple UB branches in the form: `br i1 undef, ...`
We query `AAValueSimplify` to get a value for the branch condition, so the branch
can be more complicated than just: `br i1 undef, ...`.
Patch By: Stefanos Baziotis (@baziotis)
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D71799
Summary: Calling `changeToUnreachable` in `manifest` from different places might cause really unpredictable problems. As other deleting functions are doing, we need to change these instructions after all `manifest`.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71910
Summary:
As discussed in D71799, we have found that it is more useful to reach an optimistic fixpoint in AAValueSimpify when the value is constant or undef.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: baziotis, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71852
Summary:
Follow-up on: https://reviews.llvm.org/D71435
We basically use `checkForAllInstructions` to loop through all the instructions in a function that access memory through a pointer: load, store, atomicrmw, atomiccmpxchg
Note that we can now use the `getPointerOperand()` that gets us the pointer operand for an instruction that belongs to the aforementioned set.
Question: This function returns `nullptr` if the instruction is `volatile`. Why?
Guess: Because if it is volatile, we don't want to do any transformation to it.
Another subtle point is that I had to add AtomicRMW, AtomicCmpXchg to `initializeInformationCache()`. Following `checkAllInstructions()` path, that
seemed the most reasonable place to add it and correct the fact that these instructions were ignored (they were not in `OpcodeInstMap` etc.). Is that ok?
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert, sstefan1
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71787
_Eventually_, this attribute will be assigned to a function if it
contains undefined behavior. As a first small step, I tried to make it
loop through the load instructions in a function (eventually, the plan
is to check if a load instructions causes undefined behavior, because
e.g. dereferences a null pointer - Also eventually, this won't happen in
initialize() but in updateImpl()).
Patch By: Stefanos Baziotis (@baziotis)
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D71435
The Attributor is always kept formatted so diffs are cleaner.
Sometime we get out of sync for various reasons so we need to format the
file once in a while.
This was part of D70767. When we replace the value of (call/invoke)
instructions we do not want to disturb the old call graph so we will
only replace instruction uses until we get rid of the old PM.
Accepted as part of D70767.
When we reason about the pointer argument that is byval we actually
reason about a local copy of the value passed at the call site. This was
not the case before and we wrongly introduced attributes based on the
surrounding function.
AAMemoryBehaviorArgument, AAMemoryBehaviorCallSiteArgument and
AANoCaptureCallSiteArgument are made aware of byval now. The code
to skip "subsuming positions" for reasoning follows a common pattern and
we should refactor it. A TODO was added.
Discovered by @efriedma as part of D69748.
Summary: Remove `Worklist` iteration and make use `checkForAllUses`. There is no test chage.
Reviewers: sstefan1, jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71352
Summary:
This patch introduces the deduction based on load/store instructions whose pointer operand is a non-inbounds GEP instruction.
For example if we have,
```
void f(int *u){
u[0] = 0;
u[1] = 1;
u[2] = 2;
}
```
then u must be dereferenceable(12).
This patch is inspired by D64258
Reviewers: jdoerfert, spatel, hfinkel, RKSimon, sstefan1, xbolva00, dtemirbulatov
Reviewed By: jdoerfert
Subscribers: jfb, lebedev.ri, xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70714
sstefan1