Regression from D131400: cross-language LTO causes a crash in the
compiler on the NULL deref of Scope in `isa` call when Rust IR is
involved. Presumably, this might affect other languages too, and
even Rust itself without cross-language LTO when the Rust compiler
switched to LLVM 16.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D134616
These extra module flags are not needed for this test, so remove them. In fact, leaving them in produces the following error message:
> invalid behavior operand in module flag (unexpected constant)
Differential Revision: https://reviews.llvm.org/D135294
Sometimes when a function is inlined into a different CU, `llvm-dwarfdump --verify` would find an inlined subroutine with an invalid abstract origin. This is because `DwarfUnit::addDIEEntry()` will incorrectly assume the inlined subroutine and the abstract origin are from the same CU if it can't find the CU for the inlined subroutine.
In the added test, the inlined subroutine for `bar()` is created before the CU for `B.swift` is created, so it tries to point to `goo()` in the wrong CU. Interestingly, if we swap the order of the two functions then we don't see a crash since the module for `goo()` is created first.
The fix is to give a parent DIE to `ScopeDIE` before calling `addDIEEntry()` so that its CU can be found. Luckily, `constructInlinedScopeDIE()` is only called once so we can pass it the DIE of the scope's parent and give it a child just after it's created.
`constructInlinedScopeDIE()` should always return a DIE, so assert that it is not null.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D135114
Fix a test using invalid MLIR using different VRegs for the tied operands
of ADD64rr, which happened to trigger an assertion after my latest
changes.
Also attempting to adjust the MLRegalloc tests to the adjusted regalloc
(though I don't have a 100% working setup for them even without my
changes)
This stops reporting CostPerUse 1 for `R8`-`R15` and `XMM8`-`XMM31`.
This was previously done because instruction encoding require a REX
prefix when using them resulting in longer instruction encodings. I
found that this regresses the quality of the register allocation as the
costs impose an ordering on eviction candidates. I also feel that there
is a bit of an impedance mismatch as the actual costs occure when
encoding instructions using those registers, but the order of VReg
assignments is not primarily ordered by number of Defs+Uses.
I did extensive measurements with the llvm-test-suite wiht SPEC2006 +
SPEC2017 included, internal services showed similar patterns. Generally
there are a log of improvements but also a lot of regression. But on
average the allocation quality seems to improve at a small code size
regression.
Results for measuring static and dynamic instruction counts:
Dynamic Counts (scaled by execution frequency) / Optimization Remarks:
Spills+FoldedSpills -5.6%
Reloads+FoldedReloads -4.2%
Copies -0.1%
Static / LLVM Statistics:
regalloc.NumSpills mean -1.6%, geomean -2.8%
regalloc.NumReloads mean -1.7%, geomean -3.1%
size..text mean +0.4%, geomean +0.4%
Static / LLVM Statistics:
mean -2.2%, geomean -3.1%) regalloc.NumSpills
mean -2.6%, geomean -3.9%) regalloc.NumReloads
mean +0.6%, geomean +0.6%) size..text
Static / LLVM Statistics:
regalloc.NumSpills mean -3.0%
regalloc.NumReloads mean -3.3%
size..text mean +0.3%, geomean +0.3%
Differential Revision: https://reviews.llvm.org/D133902
The DebugLoc is conserved when hoisting function calls, to ensure the
DIScope is preserved if inlining occurs.
This commit drops the DebugLoc in the case the call is an intrinsic
call that won't be lowered into a function call.
Differential Revision: https://reviews.llvm.org/D134429
This patch disables split-complex.ll for aarch64-pc-windows-msvc.
split-complex.ll fails with a crash when run on AArch64/Windows.
I have reported following issue: llvm-project/issues/58053
There is an implicit circular dependency in a debug information coming from GCC.
This results in a coredump.
It tries to resolve scope for DIE TAGs that are scopeless.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D132900
The accessibility level of a typedef or using declaration in a
struct or class was being lost when producing debug information.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D134339
llvm::object::Decompressor is used by many DWARF consumers like llvm-dwarfdump,
llvm-dwp, llvm-symbolizer. Add tests to them. The lldb test can be left to
D133530.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D134116
When populating the symbol table for an ELF object file, don't insert any symbols that come from ELF sections which don't have runtime allocated memory (typically debugging symbols).
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D133795
__declspec(safebuffers) is equivalent to
__attribute__((no_stack_protector)). This information is recorded in
CodeView.
While we are here, add support for strict_gs_check.
This adds support for backtrace generation to the llvm-symbolizer markup
filter, which is likely the largest use case.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D132706
Taking the example from the test included in this patch:
$ cat test.cpp -n
1 void fun(int *a, int cond) {
2 if (cond)
3 a[1] = 1;
4 else
5 a[1] = 2;
6 }
mldst-motion will merge and sink the stores in if.then and if.else into
if.end. The resultant PHI, gep and store should be attributed line zero
with the innermost common scope rather than picking a debug location from
one of the original stores.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D132741
Previously, we were generating zeroes when generating code alignments for AArch64, but now we should omit the value and let the assembler choose to generate nops or zeroes.
Reviewed By: efriedma, MaskRay
Differential Revision: https://reviews.llvm.org/D132508
This patch builds on prior support patches to enable support for
variadic debug values in InstrRefLDV, allowing DBG_VALUE_LISTs to
have their ranges extended.
Differential Revision: https://reviews.llvm.org/D128212
In the InstrRefBasedImpl for LiveDebugValues, we attempt to propagate
debug values through basic blocks in part by checking to see whether all
a variable's incoming debug values to a BB "agree", i.e. whether their
properties match and they refer to the same underlying value.
Prior to this patch, the check for agreement between incoming values
relied on exact equality, which meant that a VPHI and a Def DbgValue
that referred to the same underlying value would be seen as disagreeing.
This patch changes this behaviour to treat them as referring to the same
value, allowing the shared value to propagate into the BB.
Differential Revision: https://reviews.llvm.org/D125953
The absolute value of 0x8000000000000000 does not fit into an int64_t
and UBSan tells us that by crashing.
rdar://98799670
Differential Revision: https://reviews.llvm.org/D132194
There are two different senses in which a block can be "address-taken".
There can be a BlockAddress involved, which means we need to map the
IR-level value to some specific block of machine code. Or there can be
constructs inside a function which involve using the address of a basic
block to implement certain kinds of control flow.
Mixing these together causes a problem: if target-specific passes are
marking random blocks "address-taken", if we have a BlockAddress, we
can't actually tell which MachineBasicBlock corresponds to the
BlockAddress.
So split this into two separate bits: one for BlockAddress, and one for
the machine-specific bits.
Discovered while trying to sort out related stuff on D102817.
Differential Revision: https://reviews.llvm.org/D124697
Static variables declared within a routine or lexical block should
be emitted with a non-qualified name. This allows the variables to
be visible to the Visual Studio watch window.
Differential Revision: https://reviews.llvm.org/D131400
DWARF v5 6.2.4 The Line Number Program Header says:
> The first entry is the current directory of the compilation. Each additional
> path entry is either a full path name or is relative to the current directory of
> the compilation.
When forming a path, relative DW_AT_comp_dir and directories[0] are not supposed
to be joined together. Fix getFileNameByIndex to special case DWARF v5 DirIdx == 0.
Reviewed By: #debug-info, dblaikie
Differential Revision: https://reviews.llvm.org/D131804
This is a follow-up patch to D130999. In the test, the MIR contains an
unreachable MBB but the code attempts to look it up in MLocs. This
patch fixes this issue by checking for the default-constructed value.
rdar://97226240
Differential Revision: https://reviews.llvm.org/D131453
The register operand of DBG_VALUE is not selected to a proper register
bank in both AArch64 and X86. This would cause getRegClass crash after
global ISel. After discussion, we think the MIR should assume all
vritual register should be set proper register class after global ISel,
so this patch is to fix the gap of DBG_VALUE for AArch64 and X86.
Differential Revision: https://reviews.llvm.org/D129037
Implements the pc element for the symbolizing filter, including it's
"ra" and "pc" modes. Return addresses ("ra") are adjusted by
decrementing one. By default, {{{pc}}} elements are assumed to point to
precise code ("pc") locations. Backtrace elements will adopt the
opposite convention.
Along the way, some minor refactors of value printing and colorization.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D131115
This connects the Symbolizer to the markup filter and enables the first
working end-to-end flow using the filter.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D130187
The testcase was delta-reduced from an LTO build with sanitizer
coverage and the MIR tail duplication pass caused a machine basic
block to become unreachable in MIR. This caused the MBB to be invisible
to the reverse post-order traversal used to initialize the MBB <->
RPONumber lookup tables.
rdar://97226240
Differential Revision: https://reviews.llvm.org/D130999
Salvage debug info of instruction that is about to be deleted as dead in
Combiner pass. Currently supported instructions are COPY and G_TRUNC.
It allows to salvage debug info of some dead arguments of functions, by putting
DWARF expression corresponding to the instruction being deleted into related
DBG_VALUE instruction.
Here is an example of missing variables location https://godbolt.org/z/K48osb9dK.
We see that arguments x, y of function foo are not available in debugger, and
corresponding DBG_VALUE instructions have undefined register operand instead of
variables locaton after Aarch64PreLegalizerCombiner pass. The reason is that
registers where variables are located are removed as dead (with instruction
G_TRUNC). We can use salvageDebugInfo analogue for gMIR to preserve debug
locations of dead variables.
Statistics of llvm object files built with vs without this commit on -O2
optimization level (CMAKE_BUILD_TYPE=RelWithDebInfo, -fglobal-isel) on Aarch64 (macOS):
Number of variables with 100% of parent scope covered by DW_AT_location has been increased by 7,9%.
Number of variables with 0% coverage of parent scope has been decreased by 1,2%.
Number of variables processed by location statistics has been increased by 2,9%.
Average PC ranges coverage has been increased by 1,8 percentage points.
Coverage can be improved by supporting more instructions, or by calling
salvageDebugInfo for instructions that are deleted during Combiner rules exection.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D129909
After D130366 the ptrtoint expression this used results in an
error on 32-bit targets (the IR was already invalid previously,
but only produced the error with -filetype=obj).
Tweak the IR so it is correct for both 32-bit and 64-bit targets,
and can thus continue working as a generic test.
This change implements the contextual symbolizer markup elements: reset,
module, and mmap. These provide information about the runtime context of
the binary necessary to resolve addresses to symbolic values.
Summary information is printed to the output about this context.
Multiple mmap elements for the same module line are coalesced together.
The standard requires that such elements occur on their own lines to
allow for this; accordingly, anything after a contextual element on a
line is silently discarded.
Implementing this cleanly requires that the filter drive the parser;
this allows skipped sections to avoid being parsed. This also makes the
filter quite a bit easier to use, at the cost of some unused
flexibility.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D129519
Fixes https://github.com/llvm/llvm-project/issues/56484
H registers are 16 bit views of AArch64's Neon registers and
B are the 8 bit views.
msvc does not support 16 bit float (some mention in DirectX but I
couldn't find a way to get to it) so for lack of a better reference
I'm using:
85c9b41b33/server/references/dia/include/cvconst.h
(the other microsoft-pdb repo is no longer up to date)
Luckily clang does support fp16 so a test is added for that.
There is no 8 bit float type so I had to get creative with the
test case. We're not testing for correct debug info here just
that we can select the B register and not crash in the process.
For FPCR it's never going to be passed as an argument so I've
not added a test for it. It is included to keep our list looking
the same as the reference.
Reviewed By: majnemer
Differential Revision: https://reviews.llvm.org/D129774
Currently, an error exists when InstrRefBasedLDV observes transfers of
variables across copies, which causes it to lose track of variables
under certain circumstances, resulting in shorter lifetimes for those
variables as LDV gives up searching for live locations for them. This
patch fixes this issue by storing the currently tracked values in
the destination first, then updating them manually later without
clobbering or assigning them the wrong value.
Differential Revision: https://reviews.llvm.org/D128101
Originally encountered with RUST, but also there are cases with distributed LTO
where debug info dwo units contain structurally the same debug information, with
difference in DW_AT_linkage_name. This causes collision on DWO ID.
Differential Revision: https://reviews.llvm.org/D129317
Debugify in OriginalDebugInfo mode, introduced with D82545,
runs only with legacy PassManager.
This patch enables this utility for the NewPM.
Differential Revision: https://reviews.llvm.org/D115351