Now that the legacy PM is no longer tested, the huge matrix of
test prefixes used by attributor tests is no longer needed and very
confusing for the casual reader. Reduce the prefixes down to just
CHECK, TUNIT and CGSCC.
This is the first patch in a series intended for removing flag
-enable-new-pm=0 from lit tests. This is part of a bigger
effort of completely removing legacy code related to legacy
pass manager in favor of currently default new pass manager.
In this patch flag has been removed only from tests where no significant
change has been required because checks has been duplicated for
both PMs.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D134150
As my goal is to remove at least _some_ functions from the static list
in MemoryBuiltins.cpp, these tests either need to run inferattrs or
statically declare these attributes to keep passing. A couple of tests
had alternate cases which are no longer meaningful, e.g.
`malloc-load-removal.ll`.
Differential Revision: https://reviews.llvm.org/D123087
For the longest time we used `AAValueSimplify` and
`genericValueTraversal` to determine "potential values". This was
problematic for many reasons:
- We recomputed the result a lot as there was no caching for the 9
locations calling `genericValueTraversal`.
- We added the idea of "intra" vs. "inter" procedural simplification
only as an afterthought. `genericValueTraversal` did offer an option
but `AAValueSimplify` did not. Thus, we might end up with "too much"
simplification in certain situations and then gave up on it.
- Because `genericValueTraversal` was not a real `AA` we ended up with
problems like the infinite recursion bug (#54981) as well as code
duplication.
This patch introduces `AAPotentialValues` and replaces the
`AAValueSimplify` uses with it. `genericValueTraversal` is folded into
`AAPotentialValues` as are the instruction simplifications performed in
`AAValueSimplify` before. We further distinguish "intra" and "inter"
procedural simplification now.
`AAValueSimplify` was not deleted as we haven't ported the
re-materialization of instructions yet. There are other differences over
the former handling, e.g., we may not fold trivially foldable
instructions right now, e.g., `add i32 1, 1` is not folded to `i32 2`
but if an operand would be simplified to `i32 1` we would fold it still.
We are also even more aware of function/SCC boundaries in CGSCC passes,
which is good even if some tests look like they regress.
Fixes: https://github.com/llvm/llvm-project/issues/54981
Note: A previous version was flawed and consequently reverted in
6555558a80.
For the longest time we used `AAValueSimplify` and
`genericValueTraversal` to determine "potential values". This was
problematic for many reasons:
- We recomputed the result a lot as there was no caching for the 9
locations calling `genericValueTraversal`.
- We added the idea of "intra" vs. "inter" procedural simplification
only as an afterthought. `genericValueTraversal` did offer an option
but `AAValueSimplify` did not. Thus, we might end up with "too much"
simplification in certain situations and then gave up on it.
- Because `genericValueTraversal` was not a real `AA` we ended up with
problems like the infinite recursion bug (#54981) as well as code
duplication.
This patch introduces `AAPotentialValues` and replaces the
`AAValueSimplify` uses with it. `genericValueTraversal` is folded into
`AAPotentialValues` as are the instruction simplifications performed in
`AAValueSimplify` before. We further distinguish "intra" and "inter"
procedural simplification now.
`AAValueSimplify` was not deleted as we haven't ported the
re-materialization of instructions yet. There are other differences over
the former handling, e.g., we may not fold trivially foldable
instructions right now, e.g., `add i32 1, 1` is not folded to `i32 2`
but if an operand would be simplified to `i32 1` we would fold it still.
We are also even more aware of function/SCC boundaries in CGSCC passes,
which is good even if some tests look like they regress.
Fixes: https://github.com/llvm/llvm-project/issues/54981
Note: A previous version was flawed and consequently reverted in
6555558a80.
For the longest time we used `AAValueSimplify` and
`genericValueTraversal` to determine "potential values". This was
problematic for many reasons:
- We recomputed the result a lot as there was no caching for the 9
locations calling `genericValueTraversal`.
- We added the idea of "intra" vs. "inter" procedural simplification
only as an afterthought. `genericValueTraversal` did offer an option
but `AAValueSimplify` did not. Thus, we might end up with "too much"
simplification in certain situations and then gave up on it.
- Because `genericValueTraversal` was not a real `AA` we ended up with
problems like the infinite recursion bug (#54981) as well as code
duplication.
This patch introduces `AAPotentialValues` and replaces the
`AAValueSimplify` uses with it. `genericValueTraversal` is folded into
`AAPotentialValues` as are the instruction simplifications performed in
`AAValueSimplify` before. We further distinguish "intra" and "inter"
procedural simplification now.
`AAValueSimplify` was not deleted as we haven't ported the
re-materialization of instructions yet. There are other differences over
the former handling, e.g., we may not fold trivially foldable
instructions right now, e.g., `add i32 1, 1` is not folded to `i32 2`
but if an operand would be simplified to `i32 1` we would fold it still.
We are also even more aware of function/SCC boundaries in CGSCC passes,
which is good.
Fixes: https://github.com/llvm/llvm-project/issues/54981
The Attributor, as many other parts in LLVM, uses pointer equivalence
for `llvm::Value`s. This only works as long as `llvm::Value`s are
dynamically unique, or, to be exact, we will never end up with the same
`llvm::Value` representing two dynamic instances. We already provided a
helper to check the former, namely `AA::isDynamicallyUnique`, however we
could not check the latter. In this patch we move the logic into a
separate AA which helps with the growing complexity and use cases. We
also extend the interface to answer the second question rather than the
first. So we do not determine dynamically uniqueness but if we might end
up with the `llvm::Value` describing a different dynamic instance. Note
that the latter is very much tied to the Attributor capabilities to look
through memory, recursion, etc. so we need to update the logic as we go.
We look through loads in the "generic value traversal" and we
consequently don't need to look through them again in AAValueSimplify*.
The test changes stem from the fact that we allowed any simplified
value, incl. non-dynamically unique ones, as long as the underlying
memory was an alloca. This doesn't seem to make sense as allocas do not
protect against dynamically non-unique values. We need to make the
unique check better rather than excluding allocas. That in mind, we can
remove a lot of code by simply relying on the generic value traversal
load look through.
To soften the blow some minor adjustments have been made that allow more
simplification through the now used scheme and some tests have been
given a `norecurse` for now.
Most intrinsics, especially "default" ones, will not call back into the
IR module. `nocallback` encodes this nicely. As it was not used before,
this patch also makes use of `nocallback` in the Attributor which
results in many more `norecurse` deductions.
Tablegen part is mechanical, test updates by script.
Differential Revision: https://reviews.llvm.org/D118680
Heap-2-stack and heap-2-shared can replace an allocation call with
something else. To avoid us deriving information from the allocator
implementation we register a simplification callback now that will
force us to stop at the call site. We probably should create the
replacement memory eagerly and return that instead though.
Prior to this change, LLVM would attempt to optimize an
aligned_alloc(33, ...) call to the stack. This flunked an assertion when
trying to emit the alloca, which crashed LLVM. Avoid that with extra
checks.
Differential Revision: https://reviews.llvm.org/D119604
Prior to this change, LLVM would attempt to optimize an
aligned_alloc(33, ...) call to the stack. This flunked an assertion when
trying to emit the alloca, which crashed LLVM. Avoid that with extra
checks.
Differential Revision: https://reviews.llvm.org/D119604
We missed out on AANoRecurse in the module pass because we had no call
graph. With AAFunctionReachability we can simply ask if the function may
reach itself.
Differential Revision: https://reviews.llvm.org/D110099
This fixes a conceptual problem with our AAIsDead usage which conflated
call site liveness with call site return value liveness. Without the
fix tests would obviously miscompile as we make genericValueTraversal
more powerful (in a follow up). The effects on the tests are mixed but
mostly marginal. The most prominent one is the lack of `noreturn` for
functions. The reason is that we make entire blocks live at the same
time (for time reasons). Now that we actually look at the block
liveness, which we need to do, the return instructions are live and
will survive. As an example, `noreturn_async.ll` has been modified
to retain the `noreturn` even with block granularity. We could address
this easily but there is little need in practice.
Since D104432 we can look through memory by analyzing all writes that
might interfere with a load. This patch provides some logic to exclude
writes that cannot interfere with a location, due to CFG reasoning.
We make sure to avoid multi-thread write-read situations properly while
we ignore writes that cannot reach a load or writes that will be
overwritten before the load is reached.
Differential Revision: https://reviews.llvm.org/D106397
Rewrite the calloc specific handling in heap-to-stack to allow arbitrary init values. The basic problem being solved is that if an allocation is initilized to anything other than zero, this must be explicitly done for the formed alloca as well.
This covers the calloc case today, but once a couple of earlier guards are removed in this code, downstream allocators with other init values could also be handled.
Inspired by discussion on D116971
AAPointerInfo, and thereby other places, can look already through
internal global and stack memory. This patch enables them to look
through heap memory returned by functions with a `noalias` return.
In the future we can look through `noalias` arguments as well but that
will require AAIsDead to learn that such memory can be inspected by the
caller later on. We also need teach AAPointerInfo about dominance to
actually deal with memory that might not be `null` or `undef`
initialized. D106397 is a first step in that direction already.
Reviewed By: kuter
Differential Revision: https://reviews.llvm.org/D109170
This patch changes the HeapToStack optimization to attach the return alignment
attribute information to the created alloca instruction. This would cause
problems when replacing the heap allocation with an alloca did not respect the
alignment of the original heap allocation, which would typically be aligned on
an 8 or 16 byte boundary. Malloc calls now contain alignment attributes,
so we can use that information here.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D115888
AAMemoryBehaviorFloating used a custom use tracking mechanism even
though checkForAllUses exists and is already more powerful. Further,
AAMemoryBehaviorFloating uses AANoCapture to guarantee that there are no
aliases and following the uses is sufficient. This is an OK assumption
if checkForAllUses is used but custom tracking is easily out of sync
with AANoCapture and problems follow.
We first simplify the operands of a compare and then reason on the
simplified versions, e.g., with AANonNull.
This does improve the simplification capabilities but also fixes a
potential problem that has not yet been observed by simplifying the
operands first.
This patch introduces AAPointerInfo which tracks the uses of a pointer
and places them in "bins" based on their offset from the base and access
size.
As with other AAs, any pointer can be tracked but it is up to the user
to make sense of the results. The user in this patch is AAValueSimplify
and AAPotentialValues which both utilize AAPointerInfo to determine the
value of a load. For now, this is restricted to loads of allocas and
internal globals. Through the use of AAPointerInfo and the "bins" we can
track struct members separately. The users also know that storing only
zeros (at unknown indices) will result in loading only 0 (from unknown
indices). Other than that, the users are flow and context insensitive
(for now).
To deal with the "bins" more easily, AAPointerInfo provides a
forallInterfearingAccesses that applies a callback on all accesses
that might interfere with a given load or store.
Differential Revision: https://reviews.llvm.org/D104432
In order to simplify future extensions, e.g., the merge of
AAHeapToShared in to AAHeapToStack, we reorganize AAHeapToStack and the
state we keep for each malloc-like call. The result is also less
confusing as we only track malloc-like calls, not all calls. Further, we
only perform the updates necessary for a malloc-like to argue it can go
to the stack, e.g., we won't check all uses if we moved on to the
"must-be-freed" argument.
This patch also uses Attributor helps to simplify the allocated size,
alignment, and the potentially freed objects.
Overall, this is mostly a reorganization and only the use of the
optimistic helpers should change (=improve) the capabilities a bit.
Differential Revision: https://reviews.llvm.org/D104993
We have to be careful when we replace values to not use a non-dominating
instruction. It makes sense that simplification offers those as
"simplified values" but we can't manifest them in the IR without PHI
nodes. In the future we should consider potentially adding those PHI
nodes.
We should use AAValueSimplify for all value simplification, however
there was some leftover logic that predates AAValueSimplify in
AAReturnedValues. This remove the AAReturnedValues part and provides a
replacement by making AAValueSimplifyReturned strong enough to handle
all previously covered cases. Further, this improve
AAValueSimplifyCallSiteReturned to handle returned arguments.
AAReturnedValues is now much easier and the collected returned
values/instructions are now from the associated function only, making it
much more sane. We also do not have the brittle logic anymore that looks
for unresolved calls. Instead, we use AAValueSimplify to handle
recursion.
Useful code has been split into helper functions, e.g., an Attributor
interface to get a simplified value.
Differential Revision: https://reviews.llvm.org/D103860
Broke check-clang, see https://reviews.llvm.org/D102307#2869065
Ran `git revert -n ebbe149a6f08535ede848a531a601ae6591cfbc5..269416d41908bb670f67af689155d5ab8eea689a`
We have to be careful when we replace values to not use a non-dominating
instruction. It makes sense that simplification offers those as
"simplified values" but we can't manifest them in the IR without PHI
nodes. In the future we should consider potentially adding those PHI
nodes.
In order to simplify future extensions, e.g., the merge of
AAHeapToShared in to AAHeapToStack, we reorganize AAHeapToStack and the
state we keep for each malloc-like call. The result is also less
confusing as we only track malloc-like calls, not all calls. Further, we
only perform the updates necessary for a malloc-like to argue it can go
to the stack, e.g., we won't check all uses if we moved on to the
"must-be-freed" argument.
This patch also uses Attributor helps to simplify the allocated size,
alignment, and the potentially freed objects.
Overall, this is mostly a reorganization and only the use of the
optimistic helpers should change (=improve) the capabilities a bit.
Differential Revision: https://reviews.llvm.org/D104993
We should use AAValueSimplify for all value simplification, however
there was some leftover logic that predates AAValueSimplify in
AAReturnedValues. This remove the AAReturnedValues part and provides a
replacement by making AAValueSimplifyReturned strong enough to handle
all previously covered cases. Further, this improve
AAValueSimplifyCallSiteReturned to handle returned arguments.
AAReturnedValues is now much easier and the collected returned
values/instructions are now from the associated function only, making it
much more sane. We also do not have the brittle logic anymore that looks
for unresolved calls. Instead, we use AAValueSimplify to handle
recursion.
Useful code has been split into helper functions, e.g., an Attributor
interface to get a simplified value.
Differential Revision: https://reviews.llvm.org/D103860
Summary:
The current implementation of AANoFreeFloating will incorrectly list floating
point loads and stores as may-free. This prevents other attributor instances
like HeapToStack from pushing some allocations to the stack.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D103975
Remove the `nosync` attribute from the memory intrinsic definitions
(i.e. memset, memcpy, memmove).
Like native memory accesses, memory intrinsics can be volatile. This is
indicated by an immarg in the intrinsic call. All else equal, a volatile
memory intrinsic is `sync`, so we cannot annotate the intrinsic functions
themselves as `nosync`. The attributor and function-attr passes know to
take the volatile bit into account.
Since `nosync` is a default attribute, this means we have to stop using
the DefaultAttrIntrinsic tablegen class for memory intrinsics, and
specify all default attributes other than `nosync` explicitly.
Most of the test changes are trivial churn, but one test case
(in nosync.ll) was in fact incorrect before this change.
Differential Revision: https://reviews.llvm.org/D102295
The update_test_checks script can now check for global symbols and is able
to handle them properly when they differ across prefixes, e.g.,
attribute #0 might be different in different runs.
This patch simply updates all the Attributor tests with the new script.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D97906
This is a follow-up of D95238's LangRef update.
This patch updates `programUndefinedIfUndefOrPoison(V)` to return true if
`V` is used by any memory-accessing instruction.
Interestingly, this affected many tests in Attributors, mainly about adding noundefs.
The tests are updated using llvm/utils/update_test_checks.py. I checked that the diffs
are about updating noundefs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D96642
D70365 allows us to make attributes default. This is a follow up to
actually make nosync, nofree and willreturn default. The approach we
chose, for now, is to opt-in to default attributes to avoid introducing
problems to target specific intrinsics. Intrinsics with default
attributes can be created using `DefaultAttrsIntrinsic` class.
This commit cleans up the ::initialize method of various AAs in the
following ways:
- If an associated function is required, give up on declarations.
This was discovered as a real problem when lots of llvm.dbg.XXX
call sites were assumed `noreturn` until proven otherwise. That
does not make any sense and caused huge regressions and missed
deductions.
- Require more associated declarations for function interface AAs.
- Use the IRAttribute::initialize to determine if function interface
AAs can be used in IPO, don't replicate the checks (especially
isFunctionIPOAmendable) all over the place. Arguably the function
declaration check should be moved to some central place to.
Even though `noundef` IR attribute might be attached to non-void type values, AANoUndef is mistakenly identified for pointer type values only.
This patch fixes that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86737
Currently, `AANoUndefImpl::initialize` mistakenly always indicates optimistic fixpoint for function returned position.
This is because an associated value is `Function` in the case, and `isGuaranteedNotToBeUndefOrPoison` returns true for Function.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86361
This patch introduces a new abstract attribute `AANoUndef` which corresponds to `noundef` IR attribute and deduce them.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85184
Before this change we looked through all memory operations in a function
even if the first was an unknown call that could do anything. This did
cost a lot of time but there is little use to do so. We also avoid
creating AAs for things that we would have looked at in case no other AA
will; that is the reason for the test changes.
Running only the attributor-cgscc pass on a IR version of
`llvm-test-suite/MultiSource/Applications/SPASS/clause.c` reduced the
time we spend in `AAMemoryLocation::update` from 4% total to
0.9% (disclaimer: no accurate measurements).
All these tests already explicitly test against both legacy PM and NPM.
$ sed -i 's/ -attributor / -attributor -enable-new-pm=0 /g' $(rg --path-separator // -l -- -passes=)
$ sed -i 's/ -attributor-cgscc / -attributor-cgscc -enable-new-pm=0 /g' $(rg --path-separator // -l -- -passes=)
Now all tests in Transforms/Attributor/ pass under NPM.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84813
Summary:
All tests are updated, except wrapper.ll since it is not working nicely
with newly created functions.
Reviewers: jdoerfert, uenoku, baziotis, homerdin
Subscribers: arphaman, jfb, kuter, bbn, okura, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84130
Nikita Popov