Followup to D135962 to rename remaining uses of
FunctionModRefBehavior to MemoryEffects. Does not touch API names
yet, but also updates variables names FMRB/MRB to ME, to match the
new type name.
Currently, AAResultBase (from which alias analysis providers inherit)
stores a reference back to the AAResults aggregation it is part of,
so it can perform recursive alias analysis queries via
getBestAAResults().
This patch removes the back-reference from AAResultBase to AAResults,
and instead passes the used aggregation through the AAQueryInfo.
This can be used to perform recursive AA queries using the full
aggregation.
Differential Revision: https://reviews.llvm.org/D94363
Spurious ref edges are ref edges that still exist in the call graph even
though the corresponding IR reference no longer exists. This can cause
issues when deleting a dead function which has a spurious ref edge
pointed at it because currently we expect the dead function's RefSCC to
be trivial.
In the case that the dead function's RefSCC is not trivial, remove all
ref edges from other nodes in the RefSCC to it.
Removing a ref edge can result in splitting RefSCCs. There's actually no
reason to revisit those RefSCCs because currently we only run passes on
SCCs, and we've already added all SCCs in the RefSCC to the worklist.
(as opposed to removing the ref edge in
updateCGAndAnalysisManagerForPass() which can modify the call graph of
SCCs we have not visited yet). We also don't expect that RefSCC
refinement will allow us to glean any more information for optimization
use. Also, doing so would drastically increase the complexity of
LazyCallGraph::removeDeadFunction(), requiring us to return a list of
invalidated RefSCCs and new RefSCCs to add to the worklist.
Fixes#56503
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D133907
Currently, FunctionModRefBehavior tracks whether the function reads
or writes memory (ModRefInfo) and which locations it can access
(argmem, inaccessiblemem and other). This patch changes it to track
ModRef information per-location instead.
To give two examples of why this is useful:
* D117095 highlights a weakness of ModRef modelling in the presence
of operand bundles. For a memcpy call with deopt operand bundle,
we want to say that it can read any memory, but only write argument
memory. This would allow them to be treated like any other calls.
However, we currently can't express this and have to say that it
can read or write any memory.
* D127383 would ideally be modelled as a separate threadid location,
where threadid Refs outside pre-split coroutines can be ignored
(like other accesses to constant memory). The current representation
does not allow modelling this precisely.
The patch as implemented is intended to be NFC, but there are some
obvious opportunities for improvements and simplification. To fully
capitalize on this we would also want to change the way we represent
memory attributes on functions, but that's a larger change, and I
think it makes sense to separate out the FunctionModRefBehavior
refactoring.
Differential Revision: https://reviews.llvm.org/D130896
In the Tensorflow C lib utilities, an error gets thrown if some features
haven't gotten passed into the model (due to differences in ordering
which now don't exist with the transition to TFLite). However, this is
not currently the case when using TFLiteUtils. This patch makes some
minor changes to throw an error when not all inputs of the model have
been passed, which when not handled will result in a seg fault within
TFLite.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D133451
This is a long-standing FIXME with a non-FMF test that exposes
the bug as shown in issue #57357.
It's possible that there's still a way to miscompile by
mis-identifying/mis-folding FP min/max patterns, but
this patch only exposes a couple of seemingly minor
regressions while preventing the broken transform.
TLite is a lightweight, statically linkable[1], model evaluator, supporting a
subset of what the full tensorflow library does, sufficient for the
types of scenarios we envision having. It is also faster.
We still use saved models as "source of truth" - 'release' mode's AOT
starts from a saved model; and the ML training side operates in terms of
saved models.
Using TFLite solves the following problems compared to using the full TF
C API:
- a compiler-friendly implementation for runtime-loadable (as opposed
to AOT-embedded) models: it's statically linked; it can be built via
cmake;
- solves an issue we had when building the compiler with both AOT and
full TF C API support, whereby, due to a packaging issue on the TF
side, we needed to have the pip package and the TF C API library at
the same version. We have no such constraints now.
The main liability is it supporting a subset of what the full TF
framework does. We do not expect that to cause an issue, but should that
be the case, we can always revert back to using the full framework
(after also figuring out a way to address the problems that motivated
the move to TFLite).
Details:
This change switches the development mode to TFLite. Models are still
expected to be placed in a directory - i.e. the parameters to clang
don't change; what changes is the directory content: we still need
an `output_spec.json` file; but instead of the saved_model protobuf and
the `variables` directory, we now just have one file, `model.tflite`.
The change includes a utility showing how to take a saved model and
convert it to TFLite, which it uses for testing.
The full TF implementation can still be built (not side-by-side). We
intend to remove it shortly, after patching downstream dependencies. The
build behavior, however, prioritizes TFLite - i.e. trying to enable both
full TF C API and TFLite will just pick TFLite.
[1] thanks to @petrhosek's changes to TFLite's cmake support and its deps!
This just shuffles implementations and declarations around. Now the
logger and the TF C API-based model evaluator are separate.
Differential Revision: https://reviews.llvm.org/D131116
getModRefInfo() queries currently track whether the result is a
MustAlias on a best-effort basis. The only user of this functionality
is the optimized memory access type in MemorySSA -- which in turn
has no users. Given that this functionality has not found a user
since it was introduced five years ago (in D38862), I think we
should drop it again.
The context is that I'm working to separate FunctionModRefBehavior
to track mod/ref for different location kinds (like argmem or
inaccessiblemem) separately, and the fact that ModRefInfo also has
an unrelated Must flag makes this quite awkward, especially as this
means that NoModRef is not a zero value. If we want to retain the
functionality, I would probably split getModRefInfo() results into
a part that just contains the ModRef information, and a separate
part containing a (best-effort) AliasResult.
Differential Revision: https://reviews.llvm.org/D130713
Adds a number of utilities that are used to help create and update
memprof related metadata. These will be used during profile matching
and annotation, as well as by the inliner when updating the metadata.
Also adds unit tests for the utilities.
See also related RFCs:
RFC: Sanitizer-based Heap Profiler [1]
RFC: A binary serialization format for MemProf [2]
RFC: IR metadata format for MemProf [3]
(Note that the IR metadata format has changed from the RFC during
implementation, as described in the preceeding patch adding the basic
metadata and verification support.)
Depends on D128141.
Differential Revision: https://reviews.llvm.org/D128854
To solve the readnone problems in coroutines. See
https://discourse.llvm.org/t/address-thread-identification-problems-with-coroutine/62015
for details.
According to the discussion, we decide to fix the problem by inserting
isPresplitCoroutine() checks in different passes instead of
wrapping/unwrapping readnone attributes in CoroEarly/CoroCleanup passes.
In this direction, we might not be able to cover every case at first.
Let's take a "find and fix" strategy.
Reviewed By: nikic, nhaehnle, jyknight
Differential Revision: https://reviews.llvm.org/D127383
Following discussion in PR56243, we need to somehow detect the situation
when token values penetrate LCSSA form for transforms that require that
it is maintained by all values (for example, to sustain use-def dominance
invarians). This patch introduces a parameter to LCSSA checkers to control
their ignorance about tokens.
Differential Revision: https://reviews.llvm.org/D129983
Reviewed By: efriedma
D128820 stopped creating div/rem constant expressions by default;
this patch removes support for them entirely.
The getUDiv(), getExactUDiv(), getSDiv(), getExactSDiv(), getURem()
and getSRem() on ConstantExpr are removed, and ConstantExpr::get()
now only accepts binary operators for which
ConstantExpr::isSupportedBinOp() returns true. Uses of these methods
may be replaced either by corresponding IRBuilder methods, or
ConstantFoldBinaryOpOperands (if a constant result is required).
On the C API side, LLVMConstUDiv, LLVMConstExactUDiv, LLVMConstSDiv,
LLVMConstExactSDiv, LLVMConstURem and LLVMConstSRem are removed and
corresponding LLVMBuild methods should be used.
Importantly, this also means that constant expressions can no longer
trap! This patch still keeps the canTrap() method to minimize diff --
I plan to drop it in a separate NFC patch.
Differential Revision: https://reviews.llvm.org/D129148
Generalized support for subgraphs that get rendered unreachable, for
both `call` and `invoke` cases.
Differential Revision: https://reviews.llvm.org/D127921
There could be successors that were reached before but now are only
reachable from elsewhere in the CFG.
Suppose the following diamond CFG (lines are arrows pointing down):
A
/ \
B C
\ /
D
There's a call site in C that is inlined. Upon doing that, it turns out
it expands to:
call void @llvm.trap()
unreachable
D isn't reachable from C anymore, but we did discount it when we set up
FunctionPropertiesUpdater, so we need to re-include it here.
The patch also updates loop accounting to use LoopInfo rather than
traverse BBs.
Differential Revision: https://reviews.llvm.org/D127353
If the callsite is in a single BB loop, we need to exclude the BB from
the successor set (in which it'd be a member), because that set forms a
boundary at which we stop traversing the CFG, when re-ingesting BBs
after inlining; but after inlining, the callsite BB's new successors
should be visited.
Reviewed By: kazu
Differential Revision: https://reviews.llvm.org/D127178
Re-computing FunctionPropertiesInfo after each inlining may be very time
consuming: in certain cases, e.g. large caller with lots of callsites,
and when the overall IR doesn't increase (thus not tripping a size bloat
threshold).
This patch addresses this by incrementally updating
FunctionPropertiesInfo.
Differential Revision: https://reviews.llvm.org/D125841
D98718 caused the order of Values/MemoryLocations we pass to alias() to
be significant due to storing the offset in the PartialAlias case. But
some callers weren't audited and were still passing swapped arguments,
causing the returned PartialAlias offset to be negative in some
cases. For example, the newly added unittests would return -1
instead of 1.
Fixes#55343, a miscompile.
Reviewed By: asbirlea, nikic
Differential Revision: https://reviews.llvm.org/D125328
When the first commutative instruction in a region using the same value in both positions was compared to a corresponding instruction with two different values, there was an early check that determined that since the values were new, it was true that these values acted in the same way structurally. If this was not contradicted later in the program, the regions were marked as similar. This removes that check, so that it is clear that the same value cannot be mapped to two different values.
Reviewer: paquette
Differential Revision: https://reviews.llvm.org/D124775
This allows the compiler to support more features than those supported by a
model. The only requirement (development mode only) is that the new
features must be appended at the end of the list of features requested
from the model. The support is transparent to compiler code: for
unsupported features, we provide a valid buffer to copy their values;
it's just that this buffer is disconnected from the model, so insofar
as the model is concerned (AOT or development mode), these features don't
exist. The buffers are allocated at setup - meaning, at steady state,
there is no extra allocation (maintaining the current invariant). These
buffers has 2 roles: one, keep the compiler code simple. Second, allow
logging their values in development mode. The latter allows retraining
a model supporting the larger feature set starting from traces produced
with the old model.
For release mode (AOT-ed models), this decouples compiler evolution from
model evolution, which we want in scenarios where the toolchain is
frequently rebuilt and redeployed: we can first deploy the new features,
and continue working with the older model, until a new model is made
available, which can then be picked up the next time the compiler is built.
Differential Revision: https://reviews.llvm.org/D124565
This is a simple datatype with a few JSON utilities, and is independent
of the underlying executor. The main motivation is to allow taking a
dependency on it on the AOT side, and allow us build a correctly-sized
buffer in the cases when the requested feature isn't supported by the
model. This, in turn, allows us to grow the feature set supported by the
compiler in a backward-compatible way; and also collect traces exposing
the new features, but starting off the older model, and continue
training from those new traces.
Differential Revision: https://reviews.llvm.org/D124417
This changes MemorySSA to be constructed in unoptimized form.
MemorySSA::ensureOptimizedUses() can be called to optimize all
uses (once). This should be done by passes where having optimized
uses is beneficial, either because we're going to query all uses
anyway, or because we're doing def-use walks.
This should help reduce the compile-time impact of MemorySSA for
some use cases (the reason why I started looking into this is
D117926), which can avoid optimizing all uses upfront, and instead
only optimize those that are actually queried.
Actually, we have an existing use-case for this, which is EarlyCSE.
Disabling eager use optimization there gives a significant
compile-time improvement, because EarlyCSE will generally only query
clobbers for a subset of all uses (this change is not included in
this patch).
Differential Revision: https://reviews.llvm.org/D121381
If an instruction is first legal instruction in the module, and is the only legal instruction in its basic block, it will be ignored by the outliner due to a length check inherited from the older version of the outliner that was restricted to outlining within a single basic block. This removes that check, and updates any tests that broke because of it.
Reviewer: paquette
Differential Revision: https://reviews.llvm.org/D120786
The problem can be shown from the newly added test case.
There are two invocations to MemorySSAUpdater::moveToPlace, and the
internal data structure VisitedBlocks is changed in the first
invocation, and reused in the second invocation. In between the two
invocations, there is a change to the CFG, and MemorySSAUpdater is
notified about the change.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D119898
This one tries to fix:
https://github.com/llvm/llvm-project/issues/53357.
Simply, this one would check (x & y) and ~(x | y) in
haveNoCommonBitsSet. Since they shouldn't have common bits (we could
traverse the case by enumerating), and we could convert this one to (x &
y) | ~(x | y) . Then the compiler could handle it in
InstCombineAndOrXor.
Further more, since ((x & y) + (~x & ~y)) would be converted to ((x & y)
+ ~(x | y)), this patch would fix it too.
https://alive2.llvm.org/ce/z/qsKzRS
Reviewed By: spatel, xbolva00, RKSimon, lebedev.ri
Differential Revision: https://reviews.llvm.org/D118094
Due to there are other required changes in
https://reviews.llvm.org/D118094, precommit these changes to ease
reviewing. Including:
- Remove *_thwart tests.
- Remove test for (x & y) + (~x & ~y)
- Fix incorrect uniitest committeed before
The code was relying upon the implicit conversion of TypeSize to
uint64_t and assuming the type in question was always fixed. However,
I discovered an issue when running the canon-freeze pass with some
IR loops that contains scalable vector types. I've changed the code
to bail out if the size is unknown at compile time, since we cannot
compute whether the step is a multiple of the type size or not.
I added a test here:
Transforms/CanonicalizeFreezeInLoops/phis.ll
Differential Revision: https://reviews.llvm.org/D118696
This is the last major stepping stone before being able to allocate the node via the folding set allocator. That will in turn allow more general SCEV predicate expression trees.
Created to fix: https://github.com/llvm/llvm-project/issues/53537
Some intrinsics functions are considered commutative since they are performing operations like addition or multiplication. Some of these have extra parameters to provide extra information that are not part of the operation itself and are not commutative. This makes sure that if an instruction that is an intrinsic takes the non commutative path to handle this case.
Reviewer: paquette
Closes Issue #53537
Differential Revision: https://reviews.llvm.org/D118807
Nikita Popov