This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
binop (splat X), (splat C) --> splat (binop X, C)
binop (splat C), (splat X) --> splat (binop C, X)
We do this in IR, and there's a similar fold for the case with 2
non-constant operands just above the code diff in this patch.
This was discussed in D79718, and the extra shuffle in the test
(llvm/test/CodeGen/X86/vector-fshl-128.ll::sink_splatvar) where it
was noticed disappears because demanded elements analysis is no
longer blocked. The large majority of the test diffs seem to be
benign code scheduling changes, but I do see another type of win:
moving the splat later allows binop narrowing in some cases.
Regressions were avoided on x86 and ARM with the INSERT_VECTOR_ELT
restriction.
Differential Revision: https://reviews.llvm.org/D79886
For the supported binops (basic arithmetic, logicals + shifts), if we fail to simplify the demanded vector elts, then call SimplifyMultipleUseDemandedBits and try to peek through ops to remove unnecessary dependencies.
This helps with PR40502.
Differential Revision: https://reviews.llvm.org/D79003
For the 'inverse shift', we currently always perform a subtraction of the original (masked) shift amount.
But for the case where we are handling power-of-2 type widths, we can replace:
(sub bw-1, (and amt, bw-1) ) -> (and (xor amt, bw-1), bw-1) -> (and ~amt, bw-1)
This allows x86 shifts to fold away the and-mask.
Followup to D77301 + D80466.
http://volta.cs.utah.edu:8080/z/Nod0Gr
Differential Revision: https://reviews.llvm.org/D80489
This patch introduces a TargetLowering query, isMulhCheaperThanMulShift.
Currently in DAG Combine, it will transform mulhs/mulhu into a
wider multiply and a shift if the wide multiply is legal.
This TLI function is implemented on 64-bit PowerPC, as it is more desirable to
have multiply-high over multiply + shift for words and doublewords. Having
multiply-high can also aid in further transformations that can be done.
Differential Revision: https://reviews.llvm.org/D78271
Replace with forward declaration and move dependency down to source files that actually need it.
Both TargetLowering.h and TargetMachine.h are 2 of the most expensive headers (top 10) in the ClangBuildAnalyzer report when building llc.
If the caller needs to reponsible for making sure the MaybeAlign
has a value, then we should just make the caller convert it to an Align
with operator*.
I explicitly deleted the relational comparison operators that
were being inherited from Optional. It's unclear what the meaning
of two MaybeAligns were one is defined and the other isn't
should be. So make the caller reponsible for defining the behavior.
I left the ==/!= operators from Optional. But now that exposed a
weird quirk that ==/!= between Align and MaybeAlign required the
MaybeAlign to be defined. But now we use the operator== from
Optional that takes an Optional and the Value.
Differential Revision: https://reviews.llvm.org/D80455
Summary:
For some targets generic combines don't really do much and they
consume a disproportionate amount of time.
There's not really a mechanism in SDISel to tactically disable
combines, but we can have a switch to disable all of them and
let the targets just implement what they specifically need.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79112
We do not have any special handling for constant FP deopt arguments.
They are just spilled to stack or generated in register by MOVS
instruction. This is inefficient and, when we have too many such
constant arguments, may result in register allocation failure.
Instead, we can bitcast such constant FP operands to appropriately
sized integer and record as constant into statepoint and later, into
StackMap.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D80318
Will make it easier to pass the pointer info and alignment
correctly to the loads/stores.
While there also make the i32 stores independent and use a token
factor to join before the load.
Previously this code just used a default constructed
MachinePointerInfo. But we know the accesses are to a fixed stack
object or at least somewhere on the stack.
While there fix the alignment passed to the full vector load/stores.
I don't think this function is currently exercised in tree so I
don't know how to test it. I just noticed it when I removed
non-constant index support in this function.
Differential Revision: https://reviews.llvm.org/D80058
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
We have the getNegatibleCost/getNegatedExpression to evaluate the cost and negate the expression.
However, during negating the expression, the cost might change as we are changing the DAG,
and then, hit the assertion if we negated the wrong expression as the cost is not trustful anymore.
This patch is target to remove the getNegatibleCost to avoid the out of sync with getNegatedExpression,
and check the cost during negating the expression. It also reduce the duplicated code between
getNegatibleCost and getNegatedExpression. And fix the crash for the test in D76638
Reviewed By: RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D77319
Now that load/store alignment is required, we no longer need most
of them. Also switch the getLoadStoreAlignment() helper to return
Align instead of MaybeAlign.
We know the pointer somewhere on the stack, we just don't know
exactly where since the index may be variable.
Differential Revision: https://reviews.llvm.org/D80060
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
The code was calculating an offset from a stack pointer SDValue.
This is exactly what getMemBasePlusOffset does. I also replaced
sizeof(int) with a hardcoded 4. We know the type we're operating
on is 4 bytes. But the size of int that the source code is being
compiled with isn't guaranteed to be 4 bytes.
While here replace another use of getMemBasePlusOffset that was
proceeded with a call to getConstant with the other signature
that call getConstant internally.
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
For now I have changed FoldConstantVectorArithmetic to return early
if we encounter a scalable vector, since the subsequent code assumes
you can perform lane-wise constant folds. However, in future work we
should be able to extend this to look at splats of a constant value
and fold those if possible. I have also added the same code to
FoldConstantArithmetic, since that deals with vectors too.
The warnings I fixed in this patch were being generated by this
existing test:
CodeGen/AArch64/sve-int-arith.ll
Differential Revision: https://reviews.llvm.org/D79421
I've created a new variant of CreateStackTemporary that takes
TypeSize and Align arguments, and made the older instances of
CreateStackTemporary call this new function. This refactoring is
in preparation for more patches in this area related to scalable
vectors and improving the alignment calculations.
Differential Revision: https://reviews.llvm.org/D79933
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
Use an extra shift-by-1 instead of a compare and select to handle the
shift-by-zero case. This sometimes saves one instruction (if the compare
couldn't be combined with a previous instruction). It also works better
on targets that don't have good select instructions.
Note that currently this change doesn't affect most targets because
expandFunnelShift is not used because funnel shift intrinsics are
lowered early in SelectionDAGBuilder. But there is work afoot to change
that; see D77152.
Differential Revision: https://reviews.llvm.org/D77301
It sounds like an interesting idea in theory, but nothing is actually
taking advantage of it, and specifying/implementing the edge cases is
painful. So just forbid it.
Differential Revision: https://reviews.llvm.org/D79814
I have fixed up some places in SelectionDAG::getNode() where we
used to assert that the number of vector elements for two types
are the same. I have changed such cases to assert that the
element counts are the same instead. I've added new tests that
exercise the code paths for all the truncations. All the extend
operations are covered by this existing test:
CodeGen/AArch64/sve-sext-zext.ll
For the ISD::SETCC case I fixed this code path is exercised by
these existing tests:
CodeGen/AArch64/sve-fcmp.ll
CodeGen/AArch64/sve-intrinsics-int-compares-with-imm.ll
Differential Revision: https://reviews.llvm.org/D79399
allocas in LLVM IR have a specified alignment. When that alignment is
specified, the alloca has at least that alignment at runtime.
If the specified type of the alloca has a higher preferred alignment,
SelectionDAG currently ignores that specified alignment, and increases
the alignment. It does this even if it would trigger stack realignment.
I don't think this makes sense, so this patch changes that.
I was looking into this for SVE in particular: for SVE, overaligning
vscale'ed types is extra expensive because it requires realigning the
stack multiple times, or using dynamic allocation. (This currently isn't
implemented.)
I updated the expected assembly for a couple tests; in particular, for
arg-copy-elide.ll, the optimization in question does not increase the
alignment the way SelectionDAG normally would. For the rest, I just
increased the specified alignment on the allocas to match what
SelectionDAG was inferring.
Differential Revision: https://reviews.llvm.org/D79532
We have the getNegatibleCost/getNegatedExpression to evaluate the cost and negate the expression.
However, during negating the expression, the cost might change as we are changing the DAG,
and then, hit the assertion if we negated the wrong expression as the cost is not trustful anymore.
This patch is target to remove the getNegatibleCost to avoid the out of sync with getNegatedExpression,
and check the cost during negating the expression. It also reduce the duplicated code between
getNegatibleCost and getNegatedExpression. And fix the crash for the test in D76638
Reviewed By: RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D77319
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
If the SimplifyMultipleUseDemandedBits calls BITCASTs that peek through back to the original type then we can remove the BITCASTs entirely.
Differential Revision: https://reviews.llvm.org/D79572
Summary:
This patch handles illegal scalable types when lowering IR operations,
addressing several places where the value of isScalableVector() is
ignored.
For types such as <vscale x 8 x i32>, this means splitting the
operations. In this example, we would split it into two
operations of type <vscale x 4 x i32> for the low and high halves.
In cases such as <vscale x 2 x i32>, the elements in the vector
will be promoted. In this case they will be promoted to
i64 (with a vector of type <vscale x 2 x i64>)
Reviewers: sdesmalen, efriedma, huntergr
Reviewed By: efriedma
Subscribers: david-arm, tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78812
Calling getShiftAmountTy with LegalTypes set may return a type that's too narrow to hold the shift amount for integer type it's applied to.
Fixes the regression introduced by D79096
Differential Revision: https://reviews.llvm.org/D79405
Try to combine N short vector cast ops into 1 wide vector cast op:
concat (cast X), (cast Y)... -> cast (concat X, Y...)
This is part of solving PR45794:
https://bugs.llvm.org/show_bug.cgi?id=45794
As noted in the code comment, this is uglier than I was hoping because
the opcode determines whether we pass the source or destination type
to isOperationLegalOrCustom(). Also IIUC, there's no way to validate
what the other (dest or src) type is. Without the extra legality check
on that, there's an ARM regression test in:
test/CodeGen/ARM/isel-v8i32-crash.ll
...that will crash trying to lower an unsupported v8f32 to v8i16.
Differential Revision: https://reviews.llvm.org/D79360
Summary:
I have fixed several places in getSplatSourceVector and isSplatValue
to work correctly with scalable vectors. I added new support for
the ISD::SPLAT_VECTOR DAG node as one of the obvious cases we can
support with scalable vectors. In other places I have tried to do
the sensible thing, such as bail out for vector types we don't yet
support or don't intend to support.
It's not possible to add IR test cases to cover these changes, since
they are currently only ever exercised on certain targets, e.g.
only X86 targets use the result of getSplatSourceVector. I've
assumed that X86 tests already exist to test these code paths for
fixed vectors. However, I have added some AArch64 unit tests that
test the specific functions I have changed.
Differential revision: https://reviews.llvm.org/D79083
We allocated a suitably aligned frame index so we know that all the values
have ABI alignment.
For MIPS this avoids using pair of lwl + lwr instructions instead of a
single lw. I found this when compiling CHERI pure capability code where
we can't use the lwl/lwr unaligned loads/stores and and were to falling
back to a byte load + shift + or sequence.
This should save a few instructions for MIPS and possibly other backends
that don't have fast unaligned loads/stores.
It also improves code generation for CodeGen/X86/pr34653.ll and
CodeGen/WebAssembly/offset.ll since they can now use aligned loads.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78999
The two code paths have the same goal, legalizing a load of a non-byte-sized vector by loading the "flattened" representation in memory, slicing off each single element and then building a vector out of those pieces.
The technique employed by `ExpandLoad` is slightly more convoluted and produces slightly better codegen on ARM, AMDGPU and x86 but suffers from some bugs (D78480) and is wrong for BE machines.
Differential Revision: https://reviews.llvm.org/D79096
rL368553 added SimplifyMultipleUseDemandedBits handling for ISD::TRUNCATE to SimplifyDemandedBits so we don't need to duplicate this (and it gets rid of another GetDemandedBits call which is slowly being replaced with SimplifyMultipleUseDemandedBits anyhow).
Also fix some cost tables for vXi1 types to match the costs entries for the types they will be promoted to.
Differential Revision: https://reviews.llvm.org/D79045
X86 matches several 'shift+xor' funnel shift patterns:
fold (or (srl (srl x1, 1), (xor y, 31)), (shl x0, y)) -> (fshl x0, x1, y)
fold (or (shl (shl x0, 1), (xor y, 31)), (srl x1, y)) -> (fshr x0, x1, y)
fold (or (shl (add x0, x0), (xor y, 31)), (srl x1, y)) -> (fshr x0, x1, y)
These patterns are also what we end up with the proposed expansion changes in D77301.
This patch moves these to DAGCombine's generic MatchFunnelPosNeg.
All existing X86 test cases still pass, and we just have a small codegen change in pr32282.ll.
Reviewed By: @spatel
Differential Revision: https://reviews.llvm.org/D78935
Summary:
This patch tries to ensure that we do something sensible when
generating code for the ISD::INSERT_VECTOR_ELT DAG node when operating
on scalable vectors. Previously we always returned 'undef' when
inserting an element into an out-of-bounds lane index, whereas now
we only do this for fixed length vectors. For scalable vectors it
is assumed that the backend will do the right thing in the same way
that we have to deal with variable lane indices.
In this patch I have permitted a few basic combinations for scalable
vector types where it makes sense, but in general avoided most cases
for now as they currently require the use of BUILD_VECTOR nodes.
This patch includes tests for all scalable vector types when inserting
into lane 0, but I've only included one or two vector types for other
cases such as variable lane inserts.
Differential Revision: https://reviews.llvm.org/D78992
Call getNegatedExpression(Cost) and check the Cost to make the code more clear.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D78347
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Summary:
When generating code for the LLVM IR zeroinitialiser operation, if
the vector type is scalable we should be using SPLAT_VECTOR instead
of BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D78636
This is a NFC patch for D77319. The idea is to hide the getNegatibleCost inside the getNegatedExpression()
to have it return null if the cost is expensive, and add some helper function for easy to use. And
rename the old getNegatedExpression to negateExpression to avoid the semantic conflict.
Reviewed By: RKSimon
Differential revision: https://reviews.llvm.org/D78291
Summary:
Given a VL=14 that is enveloped by a proper VL=16, splitting the
masked load using the enveloping halving VL=8/8 should yields
should eventually yield V=8/5. This fixes various assert failures
in getHalfNumVectorElementsVT() and IncrementMemoryAddress().
Note, I suspect similar fixes will be needed for other masked
operations, but for now I send out a fix for masked load only.
Bugzilla issue 45563
https://bugs.llvm.org/show_bug.cgi?id=45563
Reviewers: craig.topper, mehdi_amini, nicolasvasilache
Reviewed By: craig.topper
Subscribers: hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78608
Using getValueType() is not correct for architectures extended with CHERI since
we need a pointer type and not the value that is loaded. While stack
protector is useless when you have CHERI (since CHERI provides much
stronger security guarantees), we still have a test to check that we can
generate correct code for checks. Merging b281138a1b
into our tree broke this test. Fix by using TLI.getFrameIndexTy().
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D77785
Summary:
The patch D29014 has added the new ISD::FREEZE and can deal with the
integer.
The patch D76980 has added SoftenFloatRes_FREEZE for float point.
But we still lack of expand for ppc_fp128, this will cause assertion for
some cases.
This patch is to support freeze expand for ppc_fp128.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78278
Summary:
Remove asserting vector getters from Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: dexonsmith, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: cfe-commits, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D77278
This allows targets to know exactly which operands are contributing to
the dependency, which is required for targets with per-operand
scheduling models.
Differential Revision: https://reviews.llvm.org/D77135
I've always found the "findValue" a little odd and
inconsistent with other things in SDB.
This simplfifies the code in SDB to just handle a splat constant
address or a 2 operand GEP in the same BB. This removes the
need for "findValue" since the operands to the GEP are
guaranteed to be available. The splat constant handling is
new, but was needed to avoid regressions due to constant
folding combining GEPs created in CGP.
CGP is now responsible for canonicalizing gather/scatters into
this form. The pattern I'm using for scalarizing, a scalar GEP
followed by a GEP with an all zeroes index, seems to be subject
to constant folding that the insertelement+shufflevector was not.
Differential Revision: https://reviews.llvm.org/D76947
The "Align" passed into getMachineMemOperand etc. is the alignment of
the MachinePointerInfo, not the alignment of the memory operation.
(getAlign() on a MachineMemOperand automatically reduces the alignment
to account for this.)
We were passing on wrong (overconservative) alignment in a bunch of
places. Fix a bunch of these, mostly in legalization. And while I'm
here, switch to the new Align APIs.
The test changes are all scheduling changes: the biggest effect of
preserving large alignments is that it improves alias analysis, so the
scheduler has more freedom.
(I was originally just trying to do a minor cleanup in
SelectionDAGBuilder, but I accidentally went deeper down the rabbit
hole.)
Differential Revision: https://reviews.llvm.org/D77687
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
This is a minor NFC change to make the code more clear. We have the NegatibleCost that
has cheaper, neutral, and expensive. Typically, the smaller one means the less cost.
It is inverse for current implementation, which makes following code not easy to read.
If (CostX > CostY) negate(X)
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D77993
Since 1725f28841, this should check
isFMADLegalForFAddFSub rather than the the plain isOperationLegal.
This would assert in a subset of cases due to an oddity in how FMAD is
selected. We will allow FMA formation pre-legalize, but not FMAD even
in cases where it would be valid.
The current hook requires passing in the root fadd/fsub. However, in
this distributed case, this would be far more complicated to pass in
the relevant operand. AMDGPU doesn't get any value from the node, and
only needs the type and is the only implementor, so I'm not sure why
we have this complexity. Just rename and expand the assert to avoid
the more complicated checks spread through the distribution logic.
Sometimes LegalizeTypes knows about common subexpressions before SelectionDAG
does, leading to accidental SDValue removal before its reference count was
truly zero.
Differential Revision: https://reviews.llvm.org/D76994
Reviewed-By: bjope
Fixes: https://bugs.llvm.org/show_bug.cgi?id=45049
Reverted in 3ce77142a6 because the previous patch
broke the expensive-checks bots. The new patch removes the broken check.
As proposed in D77881, we'll have the related widening operation,
so this name becomes too vague.
While here, change the function signature to take an 'int' rather
than 'size_t' for the scaling factor, add an assert for overflow of
32-bits, and improve the documentation comments.
This is the same as what was done to the CallLoweringInfo in
TargetLowering.h in r309159.
This is just a step on the way to replacing this with CallBase.
I only left it at the interface to ParseConstraints since that
needs updates to other callers in different files. I'll do that
as a follow up.
Differential Revision: https://reviews.llvm.org/D77892
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: stoklund, sdesmalen, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77272
Remove a number of includes that aren't necessary (nor are we relying on the remaining includes to provide the declarations), we just needed a llvm::Instruction forward declaration.
This exposed a couple of source files that were implicitly replying on the includes for their use of llvm::SmallSet or std::set, requiring local includes to be added there instead.
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, danstrushin
Reviewed By: dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77797
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, dantrushin
Reviewed By: reames, dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77371
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
This removes a call to getScalarType from a bunch of call sites.
It also makes the behavior consistent with SIGN_EXTEND_INREG.
Differential Revision: https://reviews.llvm.org/D77631
These should not be assuming address space 0. Calling getPointerTy is
generally the wrong thing to do, since you should already know the
type from the incoming IR.
Move the logic whether lowering of deopt value requires a spill slot in
a separate lambda.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77629
Summary:
A bug report mentioned that LLVM was producing jumps off the end of a
function when using "asm goto with outputs". Further digging pointed to
MachineBasicBlocks that had their address taken and were indirect
targets of INLINEASM_BR being removed by BranchFolder, because their
predecessor list was empty, so they appeared to have no entry.
This was a cascading failure caused earlier, during Pre-RA instruction
scheduling. We have a few special cases in Pre-RA instruction scheduling
where we split a MachineBasicBlock in two. This requires careful
handing of predecessor and successor lists for a MachineBasicBlock that
was split, and careful handing of PHI MachineInstrs that referred to the
MachineBasicBlock before it was split.
The clue that led to this fix was the observation that many callers of
MachineBasicBlock::splice() frequently call
MachineBasicBlock::transferSuccessorsAndUpdatePHIs() to update their PHI
nodes after a splice. We don't want to reuse that method, as we have
custom successor transferring logic for this block split.
This patch fixes 2 pre-existing bugs, and adds tests.
The first bug was that MachineBasicBlock::splice() correctly handles
updating most successors and predecessors; we don't need to do anything
more than removing the previous fallthrough block from the first half of
the split block post splice. Previously, we were updating the successor
list incorrectly (updating successors updates predecessors).
The second bug was that PHI nodes that needed registers from the first
half of the split block were not having entries populated. The register
live out information was correct, and the FuncInfo->PHINodesToUpdate was
correct. Specifically, the check in SelectionDAGISel::FinishBasicBlock:
for (unsigned i = 0, e = FuncInfo->PHINodesToUpdate.size(); i != e; ++i) {
MachineInstrBuilder PHI(*MF, FuncInfo->PHINodesToUpdate[i].first);
if (!FuncInfo->MBB->isSuccessor(PHI->getParent()))
continue;
PHI.addReg(FuncInfo->PHINodesToUpdate[i].second).addMBB(FuncInfo->MBB);
was `continue`ing because FuncInfo->MBB tracks the second half of
the post-split block; no one was updating PHI entries for the first half
of the post-split block.
SelectionDAGBuilder::UpdateSplitBlock() already expects to perform
special handling for MachineBasicBlocks that were split post calls to
ScheduleDAGSDNodes::EmitSchedule(), so I'm confident that it's both
correct for ScheduleDAGSDNodes::EmitSchedule() to return the second half
of the split block `CopyBB` which updates `FuncInfo->MBB` (ie. the
current MachineBasicBlock being processed), and perform special handling
for this in SelectionDAGBuilder::UpdateSplitBlock().
Reviewers: void, craig.topper, efriedma
Reviewed By: void, efriedma
Subscribers: hfinkel, fhahn, MatzeB, efriedma, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76961
The previous code used the type of the first field for the VT
passed to getNode for every field.
I've based the implementation here off what is done in visitSelect
as it removes the need to special case aggregates.
Differential Revision: https://reviews.llvm.org/D77093
Summary:
This is a roll forward of D77394 minus AlignmentFromAssumptions (which needs to be addressed separately)
Differences from D77394:
- DebugStr() now prints the alignment value or `None` and no more `Align(x)` or `MaybeAlign(x)`
- This is to keep Warning message consistent (CodeGen/SystemZ/alloca-04.ll)
- Removed a few unneeded headers from Alignment (since it's included everywhere it's better to keep the dependencies to a minimum)
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77537
We're ANDing with 1 right after which will cause the SIGN_EXTEND to
be combined to ANY_EXTEND later. Might as well just start with an
ANY_EXTEND.
While there replace create the AND using the getZeroExtendInReg
helper to remove the need to explicitly create the VecOnes constant.
This code is replacing a shift with a new shift on an extended type.
If the shift amount type can't represent the maximum shift amount
for the new type, the amount needs to be extended to a type that
can.
Previously, the code just hardcoded a check for 256 bits which
seems to have been an assumption that the original shift amount
was MVT::i8. But that seems more catered to a specific target
like X86 that uses i8 as its legal shift amount type. Other
targets may use different types.
This commit changes the code to look at the real type of the shift
amount and makes sure it has enough bits for the Log2 of the
new type. There are similar checks to this in SelectionDAGBuilder
and LegalizeIntegerTypes.
The newly-created constant zero will need an extra register to hold it
in the current statepoint lowering implementation. Remove it if there
exists one.
isGCValue should detect whether the deopt value is a GC pointer.
Currently it checks by finding the value in SI.Bases and SI.Ptrs.
However these data structures contain only those values which
have corresponding gc.relocate call. So we can miss GC value if it
does not have gc.relocate call (dead after the call).
Check GC strategy whether pointer is GC one or consider any pointer
to be GC one conservatively.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77130
Summary:
Currently, the comparison argument used for ATOMIC_CMP_XCHG is legalised
with GetPromotedInteger, which leaves the upper bits of the value
undefind. Since this is used for comparing in an LR/SC loop with a
full-width comparison, we must sign extend it. We introduce a new
getExtendForAtomicCmpSwapArg to complement getExtendForAtomicOps, since
many targets have compare-and-swap instructions (or pseudos) that
correctly handle an any-extend input, and the existing function
determines the extension of the result, whereas we are concerned with
the input.
This is related to https://reviews.llvm.org/D58829, which solved the
issue for ATOMIC_CMP_SWAP_WITH_SUCCESS, but not the simpler
ATOMIC_CMP_SWAP.
Reviewers: asb, lenary, efriedma
Reviewed By: asb
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74453
Currently, DAG combiner uses (fmul (rsqrt x) x) to estimate square
root of x. However, this method would return NaN if x is +Inf, which
is incorrect.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76853
Summary: These were templated due to SelectionDAG using int masks for shuffles and IR using unsigned masks for shuffles. But now that D72467 has landed we have an int mask version of IRBuilder::CreateShuffleVector. So just use int instead of a template
Reviewers: spatel, efriedma, RKSimon
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77183
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Summary:
In method SelectionDAGBuilder::LowerStatepoint, array SI.GCTransitionArgs
is initialized from wrong part of ImmutableStatepoint class.
We copy gc args instead of transitions args.
Reviewers: reames, skatkov
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77075
Summary:
This code was throwing away the opcode for a boolean, which was then
reconstructing the opcode from that boolean. Just pass the opcode, and
forget the boolean.
Reviewers: srhines
Reviewed By: srhines
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77100
Summary:
This change adds amdgcn.reloc.constant intrinsic to the amdgpu backend, which will compile into a relocation entry in the resulting elf.
The intrinsics takes a MetadataNode (String) as its only argument, which specifies the symbol name of the relocation entry.
`SelectionDAGBuilder::getValueImpl` is changed to allow metadata operands passed through to ISel.
Author: csyonghe <yonghe@google.com>
Reviewers: tpr, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76440
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary:
Also deprecate getOriginalAlignment, getAlignment will take much more time as it is pervasive through the codebase (including TableGened files).
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76933
There was already a test case for landingpads to handle this case, but I
had forgotten to consider PHI instructions preceding the EH_LABEL in the
landingpad.
PR45261
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary: This patch is the first effort to adding basic optimizations for FREEZE in SelDag.
Reviewers: spatel, lebedev.ri
Reviewed By: spatel
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76707
These transforms rely on a vector reduction flag on the SDNode
set by SelectionDAGBuilder. This flag exists because SelectionDAG
can't see across basic blocks so SelectionDAGBuilder is looking
across and saving the info. X86 is the only target that uses this
flag currently. By removing the X86 code we can remove the flag
and the SelectionDAGBuilder code.
This pass adds a dedicated IR pass for X86 that looks across the
blocks and transforms the IR into a form that the X86 SelectionDAG
can finish.
An advantage of this new approach is that we can enhance it to
shrink the phi nodes and final reduction tree based on the zeroes
that we need to concatenate to bring the partially reduced
reduction back up to the original width.
Differential Revision: https://reviews.llvm.org/D76649
In some scalarize/split result methods (unary, binary, ...), flags in
SDNode were not passed down, which may lead to unexpected results in
unsafe float-point optimization. This patch fixes them. (maybe not
complete)
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76832
I think we can save the MRI argument from these since it's in
GISelKnownBits already, but currently not accessible.
Implementation deferred to avoid dependency on other patches.
We have some long-standing missing shuffle optimizations that could
use this transform via VectorCombine now:
https://bugs.llvm.org/show_bug.cgi?id=35454
(and we still don't get that case in the backend either)
This function is apparently templated because there's existing code
in IR that treats mask values as unsigned and backend code that
treats masks values as signed.
The mask values are not endian-dependent (as shown by the existing
bitcast transform from DAGCombiner).
Differential Revision: https://reviews.llvm.org/D76508
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
When decided whether to generate a post-inc load/store, look at the
other memory nodes that use the same base address and, if any proceed
the current node, then don't do the combine.
The change only seems to be affecting the Arm backend, which I was
surprised at, but it appears to fix a lot of our issues around MVE
masked load/stores having to store a temporary address after an early
post-increment on a shared base address.
Differential Revision: https://reviews.llvm.org/D75847
Extract the decision to combine into a post-inc address into a
couple of functions to make the logic more clear and re-usable.
Differential Revision: https://reviews.llvm.org/D76060
For folding pattern `x-(fma y,z,u*v) -> (fma -y,z,(fma -u,v,x))`, if
`yz` is 1, `uv` is -1 and `x` is -0, sign of result would be changed.
Differential Revision: https://reviews.llvm.org/D76419
Technically we can permit EXTLOAD of the LHS operand but only if all the extended bits are shifted out. Until we test coverage for that case, I'm just disabling this to fix PR45265.
Summary:
It can be the case that a vector type is legal but the corresponding
scalar type is not legal for an architecture (i8 vs. v16i8 on AArch64).
Check if the scalar type created when folding
truncate(build_vector(x,y)) -> build_vector(truncate(x),truncate(y))
is legal if we are running after the type legalizer.
This fixes https://github.com/android/ndk/issues/1207.
Reviewers: RKSimon, srhines
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76312
Summary:
For some reason the order in which we call getNegatedExpression
for the involved operands, after a call to isCheaperToUseNegatedFPOps,
seem to matter. This patch includes a new test case in
test/CodeGen/X86/fdiv.ll that crashes if we reverse the order of
those calls. Before this patch that could happen depending on
which compiler that were used when buildind llvm. With my GCC
version (7.4.0) I got the crash, because it seems like it is
using a different order for the argument evaluation compared
to clang.
All other users of isCheaperToUseNegatedFPOps already used this
pattern with unfolded/ordered calls to getNegatedExpression, so
this patch is aligning visitFDIV with the other use cases.
This patch simply deals with the non-determinism for FDIV. While
the underlying problem with getNegatedExpression is discussed
further in D76439.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: hiraditya, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76319
Summary:
* Remove a bunch of asserts checking for unsupported scalable types and
add some more now that they are supported.
* Propagate the scalable flag where necessary.
* Add another `EVT::getExtendedVectorVT` method that takes an
ElementCount parameter.
* Add `EVT::isExtendedScalableVector` and
`EVT::getExtendedVectorElementCount` - latter is currently unused.
Reviewers: sdesmalen, efriedma, rengolin, craig.topper, huntergr
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75672
Gather/scatter don't access one memory location, they access multiple disjoint locations. So using a fixed size isn't accurate. But we don't have a way to represent the true behavior so just use UnknownSize.
Previously we "split" the memory VT and use that size for the MMO of each half. But the memory VT is scalar so splitting usually just returned the original scalar VT, but on 32-bit X86 if the scalar VT was i64 it probably returned i32?
Differential Revision: https://reviews.llvm.org/D76388
SelectionDAG CSEs nodes based on their result type and operands, but not their flags. The flags are expected to be intersected when they are CSEd. In SelectionDAGBuilder, for FP nodes we manage both the fast math flags and the nofpexcept flag after the nodes have already been CSEd when they were created with getNode. The management of the fastmath flags before the constrained nodes prevents the nofpexcept management from working correctly.
This commit moves the FMF handling for constrained intrinsics into their visitor and disables the common FMF handling for these nodes.
Differential Revision: https://reviews.llvm.org/D75224
If it is a*b-c*d, it could be also folded into fma(a, b, -c*d) or fma(-c, d, a*b).
This patch is trying to respect the uses of a*b and c*d to make the best choice.
Differential Revision: https://reviews.llvm.org/D75982
ISD::ROTL/ROTR rotation values are guaranteed to act as a modulo amount, so for power-of-2 bitwidths we only need the lowest bits.
Differential Revision: https://reviews.llvm.org/D76201
I believe we were previously calculating a pointer info with the scalar base and an offset of 0. But that's not really where the gather is pointing. The offset is a function of the indices of the GEP we looked through.
Also set the size of the MachineMemOperand to UnknownSize
Differential Revision: https://reviews.llvm.org/D76157
Under certain circumstances we'll end up in the position where the negated shift amount will get truncated to the type specified getScalarShiftAmountTy(), so we need to test for a truncated version of the shift amount as well.
This allows us to remove half of the remaining patterns tested for by X86ISelLowering's combineOrShiftToFunnelShift.
Followup to D75114, this patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have variable shift amounts, matched with MatchFunnelPosNeg which acts in an (almost) equivalent manner to MatchRotatePosNeg.
Summary:
Using the default DAG.UnrollVectorOp on v16i8 and v8i16 vectors
results in i8 or i16 nodes being inserted into the SelectionDAG. Since
those are illegal types, this causes a legalization assertion failure
for some code patterns, as uncovered by PR45178. This change unrolls
shifts manually to avoid this issue by adding and using a new optional
EVT argument to DAG.ExtractVectorElements to control the type of the
extract_element nodes.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76043
Summary:
This patch adds the following intrinsics for non-temporal gather loads
and scatter stores:
* aarch64_sve_ldnt1_gather_index
* aarch64_sve_stnt1_scatter_index
These intrinsics implement the "scalar + vector of indices" addressing
mode.
As opposed to regular and first-faulting gathers/scatters, there's no
instruction that would take indices and then scale them. Instead, the
indices for non-temporal gathers/scatters are scaled before the
intrinsics are lowered to `ldnt1` instructions.
The new ISD nodes, GLDNT1_INDEX and SSTNT1_INDEX, are only used as
placeholders so that we can easily identify the cases implemented in
this patch in performGatherLoadCombine and performScatterStoreCombined.
Once encountered, they are replaced with:
* GLDNT1_INDEX -> SPLAT_VECTOR + SHL + GLDNT1
* SSTNT1_INDEX -> SPLAT_VECTOR + SHL + SSTNT1
The patterns for lowering ISD::SHL for scalable vectors (required by
this patch) were missing, so these are added too.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75601
This is a reimplementation of the optimization removed in D75964. The actual spill/fill optimization is handled by D76013, this one just worries about reducing the stackmap section size itself by eliminating redundant entries. As noted in the comments, we could go a lot further here, but avoiding the degenerate invoke case as we did before is probably "enough" in practice.
Differential Revision: https://reviews.llvm.org/D76021
Summary:
callbr's indirect branches aren't expected to be taken, so reduce their
probabilities to 0 while increasing the default destination to 1. This
allows some code improvements through block placement.
Reviewers: nickdesaulniers
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72656
We just removed a broken duplicate elimination algorithm in D75964, and after landed that it occurred to me that duplicate elimination is simply CSE. SelectionDAG has a build in CSE, so why wasn't that triggering? Well, it turns out we were overly conservative in the memory states for our reloads and CSE (rightly) considers the incoming memory state for a load part of the identity of the load.
By loosening the chain and allowing reordering, we also allow CSE. As shown in the test case, doing iterative CSE as we go is enough to eliminate duplicate stores in later statepoints as well. We key our (block local) slot map by SDValue, so commoning a previous pair of loads at construction time means we also common following stores.
Differential Revision: https://reviews.llvm.org/D76013
This patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have constant shift amounts.
Differential Revision: https://reviews.llvm.org/D75114
A downstream test case (see included reduced test) revealed that we have a bug in how we handle duplicate relocations. If we have the same SDValue relocated twice, and that value happens to be a constant (such as null), we only export one of the two llvm::Values. Exporting on a per llvm::Value basis is required to allow lowering of gc.relocates in following basic blocks (e.g. invokes). Without it, we end up with a use of an undefined vreg and bad things happen.
Rather than fixing the optimization - which appears to be hard - I propose we simply remove it. There are no tests in tree that change with this code removed. If we find out later that this did matter for something, we can reimplement a variation of this in CodeGenPrepare to catch the easy cases without complicating the lowering code.
Thanks to Denis and Serguei who did all the hard work of figuring out what went wrong here. The patch is by far the easy part. :)
Differential Revision: https://reviews.llvm.org/D75964
As noted on D75114, if both arguments of a funnel shift are consecutive loads we are missing the opportunity to combine them into a single load.
Differential Revision: https://reviews.llvm.org/D75624
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
I expect that the isCondCodeLegal checks should match that CC of
the node that we're going to create.
Rewriting to a switch to minimize repeated mentions of the same
constants.
The address calculation for the offset assumes that you can calculate the offset by multiplying the index by the store size of the element. But that only works if the element's store size is exactly its real size since we store vectors tightly packed in memory. There are improvements we could make to this like special casing extracting element 0. I think we could also handle cases where the extracted VT is byte sized and the index is aligned with the extract element count.
Differential Revision: https://reviews.llvm.org/D75377
Select_cc isn't used by all targets. X86 doesn't have optimizations
for it.
Since we already know the input to the sint_to_fp/uint_to_fp is
a setcc we can just emit a plain select using that setcc as the
condition. Other DAG combines can turn that into a select_cc on
targets that support it.
Differential Revision: https://reviews.llvm.org/D75415
We get the simple cases of this via demanded elements and other folds,
but that doesn't work if the values have >1 use, so add a dedicated
match for the pattern.
We already have this transform in IR, but it doesn't help the
motivating x86 tests (based on PR42024) because the shuffles don't
exist until after legalization and other combines have happened.
The AArch64 test shows a minimal IR example of the problem.
Differential Revision: https://reviews.llvm.org/D75348
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
We can only report the knownbits for a SCALAR_TO_VECTOR node if we only demand the 0'th element - the upper elements are undefined and shouldn't be trusted.
This is causing a number of regressions that need addressing but we need to get the bugfix in first.
According to Joseph Myers, a libm maintainer
> They were only ever an ABI (selected by use of -ffinite-math-only or
> options implying it, which resulted in the headers using "asm" to redirect
> calls to some libm functions), not an API. The change means that ABI has
> turned into compat symbols (only available for existing binaries, not for
> anything newly linked, not included in static libm at all, not included in
> shared libm for future glibc ports such as RV32), so, yes, in any case
> where tools generate direct calls to those functions (rather than just
> following the "asm" annotations on function declarations in the headers),
> they need to stop doing so.
As a consequence, we should no longer assume these symbols are available on the
target system.
Still keep the TargetLibraryInfo for constant folding.
Differential Revision: https://reviews.llvm.org/D74712
This may inhibit vector narrowing in general, but there's
already an inconsistency in the way that we deal with this
pattern as shown by the test diff.
We may want to add a dedicated function for narrowing fneg.
It's often folded into some other op, so moving it away from
other math ops may cause regressions that we would not see
for normal binops.
See D73978 for more details.
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
This is the second patch as part of https://bugs.llvm.org/show_bug.cgi?id=36544
Merging in the ConstantSDNode variant of FoldConstantArithmetic. After this, I will begin merging in FoldConstantVectorArithmetic
I've ensured this patch can build & pass all lit tests in Windows and Linux environments.
Patch by @justice_adams (Justice Adams)
Differential Revision: https://reviews.llvm.org/D74881
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
A question about this behavior came up on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139003.html
...and as part of backend improvements in D73978.
We decided not to implement a more general change that would have
folded any FP binop with nearly arbitrary constant + undef operand
to undef because that is not theoretically correct (even if it is
practically correct).
This is the SDAG-equivalent to the IR change in D74713.
Use the SelectionDAG::getValidShiftAmountConstant helper to get const/constsplat shift amounts, which allows us to drop the out of range shift amount early-out.
First step towards better non-uniform shift amount support in SimplifyDemandedBits.
This includes both GEPs where the indexed type is a scalable vector, and
GEPs where the result type is a scalable vector.
Differential Revision: https://reviews.llvm.org/D73602
Similar to what we already do with SimplifyDemandedVectorElts, call SimplifyDemandedBits across all the extracted elements of the source vector, treating it as single use.
There's a minor regression in store-weird-sizes.ll which will be addressed in an upcoming SimplifyDemandedBits patch.
This reverts commit 649aba93a2, now that
the approach started there has been shown to be workable in the patch
series culminating in https://reviews.llvm.org/D74192.
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
These are going to be useful in TargetLowering::SimplifyDemandedBits, so expose these helpers outside of SelectionDAG.cpp
Also add an getValidShiftAmountConstant early-out to getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant so we can use them for scalar cases as well.
Summary:
This patch implements the part of the calling convention
where SVE Vectors are passed by reference. This means the
caller must allocate stack space for these objects and
pass the address to the callee.
Reviewers: efriedma, rovka, cameron.mcinally, c-rhodes, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71216
This adds another pattern to the combiner for a case that we were not handling
to generate the REV16 instruction for ARM/Thumb2 and a bswap+ror on X86.
Differential Revision: https://reviews.llvm.org/D74032
Summary:
When using strict fp, it is required to update the
chain when performing integer type promotion of a
operand to a integer to floating point conversion.
Reviewers: craig.topper, john.brawn
Reviewed By: craig.topper
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74597
Patchable statepoint is lowered into sequence of nops, so zeroed call target
should not be on register. It is better to use getTargetConstant instead
of getConstant to select zero constant for call target.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D74465
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.
This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.
It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.
Differential Revision: https://reviews.llvm.org/D74221
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
The method attempts to find loads that can be legally clustered by
looking for loads consuming the same chain glue token.
However, the old code looks at _all_ users of values produced by the
chain node -- including uses of the loaded/returned value of volatile
loads or atomics. This could lead to circular dependencies which then
failed during scheduling.
With this change, we filter out users by getResNo, i.e. by which
SDValue value they use, to ensure that we only look at users of the
chain glue token.
This appears to be a rather old bug, which is perhaps surprising.
However, the test case is actually quite fragile (i.e., it is hidden
by fairly small changes), and the test _must_ use volatile loads for
the bug to manifest.
Reviewers: arsenm, bogner, craig.topper, foad
Subscribers: MatzeB, jvesely, wdng, hiraditya, javed.absar, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74253
This adds a strict version of FP16_TO_FP and FP_TO_FP16 and uses
them to implement soft promotion for the half type. This is
enough to provide basic support for __fp16 with strictfp.
Add the necessary X86 support to use VCVTPS2PH/VCVTPH2PS when F16C
is enabled.
Add a simplification to fuse a manual vector extract with shifts and
truncate into a bitcast.
Unpacking and packing values into vectors is only optimized with
extractelement instructions, not when manually unpacked using shifts
and truncates.
This patch simplifies shifts and truncates into a bitcast if possible.
Simplify (build_vec (trunc $1)
(trunc (srl $1 width))
(trunc (srl $1 (2 * width))) ...)
to (bitcast $1)
Differential Revision: https://reviews.llvm.org/D73892
Remove code from LegalizeTypes that allowed this to work.
We were already using BUILD_PAIR for this in some places so this
standardizes on a single way to do this.
Summary:
For CTTZ we place a set bit just past where the non-promoted type
stopped so the extended bits won't be used for the count. For
CTTZ_ZERO_UNDEF we don't care what happens if no bits are set in
the original type and we end up counting into the extended bits.
So we can just use ANY_EXTEND for both cases.
This matches what is done in type legalization for these operations.
We make no effort to force the upper bits to zero.
Differential Revision: https://reviews.llvm.org/D74111
Add the isCandidateForCallSiteEntry predicate to MachineInstr to
determine whether a DWARF call site entry should be created for an
instruction.
For now, it's enough to have any call instruction that doesn't belong to
a blacklisted set of opcodes. For these opcodes, a call site entry isn't
meaningful.
Differential Revision: https://reviews.llvm.org/D74159
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
This reverts commit ed29dbaafa.
I'm backing out D68945, which as the discussion for D73526 shows, doesn't
seem to handle the -O0 path through the codegen backend correctly. I'll
reland the patch when a fix is worked out, apologies for all the churn.
The two parent commits are part of this revert too.
Conflicts:
llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
llvm/test/DebugInfo/X86/dbg-addr-dse.ll
SelectionDAGBuilder conflict is due to a nearby change in e39e2b4a79
that's technically unrelated. dbg-addr-dse.ll conflicted because
41206b61e3 (legitimately) changes the order of two lines.
There are further modifications to dbg-value-func-arg.ll: it landed after
the patch being reverted, and I've converted indirection to be represented
by the isIndirect field rather than DW_OP_deref.
This reverts commit 3137fe4d23.
I'm backing out D68945, which this patch is a follow up for. It'll be
re-landed when D68945 is fixed.
The changes to dbg-value-func-arg.ll occur because our handling of certain
kinds of location now mixes up indirection that happens at different points
in a DIExpression. While this is a regression, it's a return to the prior
behaviour while a better patch is sought.
This reverts commit 2d3174c4df.
The overall solution for this problem is reverting D68945, which wasn't
handling the -O0 path through the codegen backend correctly. See:
discussion in D73526.
Summary:
This reverts commit 3ef169e586. The
purpose of this commit was to allow stack machines to perform
instruction selection for instructions with variadic defs. However,
MachineInstrs fundamentally cannot support variadic defs right now, so
this change does not turn out to be useful.
Depends on D73927.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73928
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Ensure that OptLevelChanger::SavedFastISel is initialized in the constructor.
This should be NFC - as the equivalent 'same opt level' early-out is used in the destructor as well, so SavedFastISel is only actually referenced in the general case.
Differential Revision: https://reviews.llvm.org/D73875
Under MVE, we do not have any lowering for fminimum, which a
vector_reduce_fmin without NoNan will be expanded into. As with the
other recent patches, force this to expand in the pre-isel pass. Note
that Neon lowering would be OK because the scalar fminimum uses the
vector VMIN instruction, but is probably better to just rely on the
scalar operations, which is what is done here.
Also fixes what appears to be the reversal of INF vs -INF in the
vector_reduce_fmin widening code.
We have to be careful in SimplifyDemandedBits with loads in case we attempt to combine back to a constant (which then gets turned into a constant pool load again), but we can at least set the upper KnownBits for a ZEXTLoad to zero.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
Summary:
A Copy with a source that is zeros is the same as a Set of zeros.
This fixes the invariant that SrcAlign should always be non-null.
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73791
This is based on this llvm-dev thread http://lists.llvm.org/pipermail/llvm-dev/2019-December/137521.html
The current strategy for f16 is to promote type to float every except where the specific width is required like loads, stores, and bitcasts. This results in rounding occurring in odd places instead of immediately after arithmetic operations. This interacts in weird ways with the __fp16 type in clang which is a storage only type where arithmetic is always promoted to float. InstCombine can remove some fpext/fptruncs around such arithmetic and turn it into arithmetic on half. This wouldn't be so bad if SelectionDAG was able to put those fpext/fpround back in when it promotes.
It is also not obvious how to handle to make the existing strategy work with STRICT fp. We need to use STRICT versions of the conversions which require chain operands. But if the conversions are created for a bitcast, there is no place to get an appropriate chain from.
This patch implements a different strategy where conversions are emitted directly around arithmetic operations. And otherwise its passed around as an i16 including in arguments and return values. This can result in more conversions between arithmetic operations, but is closer to matching the IR the frontend generates for __fp16. And it will allow us to use the chain from constrained arithmetic nodes to link the STRICT_FP_TO_FP16/STRICT_FP16_TO_FP that will need to be added. I've set it up so that each target can opt into the new behavior. Converting all the targets myself was more than I was able to handle.
Differential Revision: https://reviews.llvm.org/D73749
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::INSERT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
This patch addresses the issue found in https://bugs.llvm.org/show_bug.cgi?id=44585
where a DW_OP_deref was placed at the end of a dwarf expression, resulting in corrupt
symbols when debugging.
This is an attempt to reland with a few fixes for buildbot since I
haven't merged from master in a bit.
Differential Revision: https://reviews.llvm.org/D73526
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
This is a follow up on D61634. It adds an LLVM IR intrinsic to allow better implementation of memcpy from C++.
A follow up CL will add the intrinsics in Clang.
Reviewers: courbet, theraven, t.p.northover, jdoerfert, tejohnson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71710
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Differential Revision: This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
and macro FUNCTION likewise. NFCI.
Some functions like fmuladd don't really have a node, we should divide
the declaration form those have node to avoid introducing fake nodes.
Differential Revision: https://reviews.llvm.org/D72871
Updated FoldConstantArithmetic method signature to match that of
FoldConstantVectorArithmetic in preparation for merging the two
functions together
https://bugs.llvm.org/show_bug.cgi?id=36544
This is the first step in combining the various
FoldConstantVectorArithmetic and FoldConstantVectorArithmetic
functions into one FoldConstantArithmetic function.
Differential Revision: https://reviews.llvm.org/D72870
Unlike the existing code that I modified here, I only handle the
case where the strict_fsetcc has a single use. Not sure exactly
how to handle multiples uses.
Testing this on X86 is hard because we already have a other
combines that get rid of lowered version of the integer setcc that
this xor will eventually become. So this combine really just
saves a bunch of extra nodes being created. Not sure about other
targets.
Differential Revision: https://reviews.llvm.org/D71816
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call.
Match the approach in SimplifyDemandedBits/ComputeNumSignBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits call.
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call, additionally we only ever need original demanded elts of the base vector even if the index is unknown.
This patch also fixes up a number of cases in DAGCombine and
SelectionDAGBuilder where the size of a scalable vector is used in a
fixed-width context (thus triggering an assertion failure).
Reviewers: efriedma, c-rhodes, rovka, cameron.mcinally
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71215
In LLVM IR, vscale can be represented with an intrinsic. For some targets,
this is equivalent to the constexpr:
getelementptr <vscale x 1 x i8>, <vscale x 1 x i8>* null, i32 1
This can be used to propagate the value in CodeGenPrepare.
In ISel we add a node that can be legalized to one or more
instructions to materialize the runtime vector length.
This patch also adds SVE CodeGen support for VSCALE, which maps this
node to RDVL instructions (for scaled multiples of 16bytes) or CNT[HSD]
instructions (scaled multiples of 2, 4, or 8 bytes, respectively).
Reviewers: rengolin, cameron.mcinally, hfinkel, sebpop, SjoerdMeijer, efriedma, lattner
Reviewed by: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68203
Summary:
WebAssembly is unique among upstream targets in that it does not at
any point use physical registers to store values. Instead, it uses
virtual registers to model positions in its value stack. This means
that some target-independent lowering activities that would use
physical registers need to use virtual registers instead for
WebAssembly and similar downstream targets. This CL generalizes the
existing `usesPhysRegsForPEI` lowering hook to
`usesPhysRegsForValues` in preparation for using it in more places.
One such place is in InstrEmitter for instructions that have variadic
defs. On register machines, it only makes sense for these defs to be
physical registers, but for WebAssembly they must be virtual registers
like any other values. This CL changes InstrEmitter to check the new
target lowering hook to determine whether variadic defs should be
physical or virtual registers.
These changes are necessary to support a generalized CALL instruction
for WebAssembly that is capable of returning an arbitrary number of
arguments. Fully implementing that instruction will require additional
changes that are described in comments here but left for a follow up
commit.
Reviewers: aheejin, dschuff, qcolombet
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71484
This was unconditionally folding this to the source operand, even if the access was out of bounds. Use undef instead of the extract is not the first element.
This helps with some cases where 3-vectors are legalized and avoids processing the 4th component.
Original Patch by: arsenm (Matt Arsenault)
Differential Revision: https://reviews.llvm.org/D51589
Simon Pilgrim