interleave-group
The vectorizer currently does not attempt to create interleave-groups that
contain predicated loads/stores; predicated strided accesses can currently be
vectorized only using masked gather/scatter or scalarization. This patch makes
predicated loads/stores candidates for forming interleave-groups during the
Loop-Vectorizer's analysis, and adds the proper support for masked-interleave-
groups to the Loop-Vectorizer's planning and transformation stages. The patch
also extends the TTI API to allow querying the cost of masked interleave groups
(which each target can control); Targets that support masked vector loads/
stores may choose to enable this feature and allow vectorizing predicated
strided loads/stores using masked wide loads/stores and shuffles.
Reviewers: Ayal, hsaito, dcaballe, fhahn, javed.absar
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53011
llvm-svn: 344472
DIV/REM by constants should always be expanded into mul/shift/etc.
patterns. Unfortunately the ConstantHoisting pass runs too early at a
point where the pattern isn't expanded yet. However after
ConstantHoisting hoisted some immediate the result may not expand
anymore. Also the hoisting typically doesn't make sense because it
operates on immediates that will change completely during the expansion.
Report DIV/REM as TCC_Free so ConstantHoisting will not touch them.
Differential Revision: https://reviews.llvm.org/D53174
llvm-svn: 344315
Summary: This was inheriting the cost from the AVX table, but should be legal under AVX512.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51267
llvm-svn: 340708
X86 normally requires immediates to be a signed 32-bit value which would exclude i64 0x80000000. But for add/sub we can negate the constant and use the opposite instruction.
llvm-svn: 338204
We penalize general SDIV/UDIV costs but don't do the same for SREM/UREM.
This patch makes general vector SREM/UREM x20 as costly as scalar, the same approach as we do for SDIV/UDIV. The patch also extends the existing SDIV/UDIV constant costs for SREM/UREM - at the moment this means the additional cost of a MUL+SUB (see D48975).
Differential Revision: https://reviews.llvm.org/D48980
llvm-svn: 336486
These were being over cautious for costs for one/two op general shuffles - VSHUFPD doesn't have to replicate the same shuffle in both lanes like VSHUFPS does.
llvm-svn: 335216
As discussed on PR33744, this patch relaxes ShuffleKind::SK_Alternate which requires shuffle masks to only match an alternating pattern from its 2 sources:
e.g. v4f32: <0,5,2,7> or <4,1,6,3>
This seems far too restrictive as most SIMD hardware which will implement it using a general blend/bit-select instruction, so replaces it with SK_Select, permitting elements from either source as long as they are inline:
e.g. v4f32: <0,5,2,7>, <4,1,6,3>, <0,1,6,7>, <4,1,2,3> etc.
This initial patch just updates the name and cost model shuffle mask analysis, later patch reviews will update SLP to better utilise this - it still limits itself to SK_Alternate style patterns.
Differential Revision: https://reviews.llvm.org/D47985
llvm-svn: 334513
This enables us to detect more fast path sdiv cases under cost analysis.
This patch also enables us to handle non-uniform-constant pow2 cases for X86 SDIV costs.
Found while working on D46276
Future patches can then extend the vectorizers to more fully support non-uniform pow2 cases.
Differential Revision: https://reviews.llvm.org/D46637
llvm-svn: 332969
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Algorithmically compute the 'x20' SDIV/UDIV vector costs - this is necessary for PR36550 when DIV costs will be driven from the scheduler models.
llvm-svn: 330870
Add fdiv costs for Goldmont using table 16-17 of the Intel Optimization Manual. Also add overrides for FSQRT for Goldmont and Silvermont.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44644
llvm-svn: 328451
Agner's tables indicate that for SSE42+ targets (Core2 and later) we can reduce the FADD/FSUB/FMUL costs down to 1, which should fix the Himeno benchmark.
Note: the AVX512 FDIV costs look rather dodgy, but this isn't part of this patch.
Differential Revision: https://reviews.llvm.org/D43733
llvm-svn: 326133
In the motivating case from PR35681 and represented by the macro-fuse-cmp test:
https://bugs.llvm.org/show_bug.cgi?id=35681
...there's a 37 -> 31 byte size win for the loop because we eliminate the big base
address offsets.
SPEC2017 on Ryzen shows no significant perf difference.
Differential Revision: https://reviews.llvm.org/D42607
llvm-svn: 324289
This will cause the vectorizers to do some limiting of the vector widths they create. This is not a strict limit. There are reasons I know of that the loop vectorizer will generate larger vectors for.
I've written this in such a way that the interface will only return a properly supported width(0/128/256/512) even if the attribute says something funny like 384 or 10.
This has been split from D41895 with the remainder in a follow up commit.
llvm-svn: 323015
Summary:
If the vector type is transformed to non-vector single type, the compile
may crash trying to get vector information about non-vector type.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41862
llvm-svn: 322106
Previously the lambda for AVX512 passed out a flag that indicated whether AVX512BW was required and that was checked against the AVX512BW subtarget flag outside.
This patch changes the interface to pass the AVX512BW subtarget bit in and return its value if we detect 16 or 8 bit types.
llvm-svn: 319919
Summary:
This adds a new fast gather feature bit to cover all CPUs that support fast gather that we can use independent of whether the AVX512 feature is enabled. I'm only using this new bit to qualify AVX2 codegen. AVX512 is still implicitly assuming fast gather to keep tests working and to match the scatter behavior.
Test command lines have been added for these two cases.
Reviewers: magabari, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40282
llvm-svn: 318983
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This patch contains more accurate cost of interelaved load\store of stride 2 for the types int64\double on AVX2.
Reviewers: delena, RKSimon, craig.topper, dorit
Reviewed By: dorit
Differential Revision: https://reviews.llvm.org/D40008
llvm-svn: 318385
The type legalizer will try to scalarize these operations if it sees them, but there is no handling for scalarizing them. This leads to a fatal error. With this change they will now be scalarized by the mem intrinsic scalarizing pass before SelectionDAG.
llvm-svn: 318380
Summary:
The cost calculation for default case on X86 target does not always
follow correct wayt because of missing 4-th argument in
`BaseT::getCastInstrCost()` call. Added this missing parameter.
Reviewers: hfinkel, mkuper, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39687
llvm-svn: 317576
Recommit:
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
fixed the location of the lit test it works with make check-all.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317471
reverted my changes will be committed later after fixing the failure
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317433
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317432
- Targets that want to support memcmp expansions now return the list of
supported load sizes.
- Expansion codegen does not assume that all power-of-two load sizes
smaller than the max load size are valid. For examples, this is not the
case for x86(32bit)+sse2.
Fixes PR34887.
llvm-svn: 316905
This patch adds accurate instructions cost.
The formula presents two cases(stride 3 and stride 4) and calculates the cost according to the VF and stride.
Reviewers:
1. delena
2. Farhana
3. zvi
4. dorit
5. Ayal
Differential Revision: https://reviews.llvm.org/D38762
Change-Id: If4cfbd4ac0e63694e8144cb78c7fa34850647ff7
llvm-svn: 316072
Summary:
Right now there are two functions with the same name, one does the work
and the other one returns true if expansion is needed. Rename
TargetTransformInfo::expandMemCmp to make it more consistent with other
members of TargetTransformInfo.
Remove the unused Instruction* parameter.
Differential Revision: https://reviews.llvm.org/D38165
llvm-svn: 314096
This is intended to be a superset of the functionality from D31037 (EarlyCSE) but implemented
as an independent pass, so there's no stretching of scope and feature creep for an existing pass.
I also proposed a weaker version of this for SimplifyCFG in D30910. And I initially had almost
this same functionality as an addition to CGP in the motivating example of PR31028:
https://bugs.llvm.org/show_bug.cgi?id=31028
The advantage of positioning this ahead of SimplifyCFG in the pass pipeline is that it can allow
more flattening. But it needs to be after passes (InstCombine) that could sink a div/rem and
undo the hoisting that is done here.
Decomposing remainder may allow removing some code from the backend (PPC and possibly others).
Differential Revision: https://reviews.llvm.org/D37121
llvm-svn: 312862
SLP vectorizer supports horizontal reductions for Add/FAdd binary
operations. Patch adds support for horizontal min/max reductions.
Function getReductionCost() is split to getArithmeticReductionCost() for
binary operation reductions and getMinMaxReductionCost() for min/max
reductions.
Patch fixes PR26956.
Differential revision: https://reviews.llvm.org/D27846
llvm-svn: 312791
Summary:
Add patterns for
fptoui <16 x float> to <16 x i8>
fptoui <16 x float> to <16 x i16>
Reviewers: igorb, delena, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37505
llvm-svn: 312704
Summary:
We add the precise cache sizes and associativity for the following Intel
architectures:
- Penry
- Nehalem
- Westmere
- Sandy Bridge
- Ivy Bridge
- Haswell
- Broadwell
- Skylake
- Kabylake
Polly uses since several months a performance model for BLAS computations that
derives optimal cache and register tile sizes from cache and latency
information (based on ideas from "Analytical Modeling Is Enough for High-Performance BLIS", by Tze Meng Low published at TOMS 2016).
While bootstrapping this model, these target values have been kept in Polly.
However, as our implementation is now rather mature, it seems time to teach
LLVM itself about cache sizes.
Interestingly, L1 and L2 cache sizes are pretty constant across
micro-architectures, hence a set of architecture specific default values
seems like a good start. They can be expanded to more target specific values,
in case certain newer architectures require different values. For now a set
of Intel architectures are provided.
Just as a little teaser, for a simple gemm kernel this model allows us to
improve performance from 1.2s to 0.27s. For gemm kernels with less optimal
memory layouts even larger speedups can be reported.
Reviewers: Meinersbur, bollu, singam-sanjay, hfinkel, gareevroman, fhahn, sebpop, efriedma, asb
Reviewed By: fhahn, asb
Subscribers: lsaba, asb, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D37051
llvm-svn: 311647
Store operation takes 2 UOps on X86 processors. The exact cost calculation affects several optimization passes including loop unroling.
This change compensates performance degradation caused by https://reviews.llvm.org/D34458 and shows improvements on some benchmarks.
Differential Revision: https://reviews.llvm.org/D35888
llvm-svn: 311285
Add missing SK_PermuteSingleSrc costs for AVX2 targets and earlier, also added some of the simpler SK_PermuteTwoSrc costs to support splitting of SK_PermuteSingleSrc shuffles
llvm-svn: 310632
The root cause of reverting was fixed - PR33514.
Summary:
The patch makes instruction count the highest priority for
LSR solution for X86 (previously registers had highest priority).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D30562
From: Evgeny Stupachenko <evstupac@gmail.com>
<evgeny.v.stupachenko@intel.com>
llvm-svn: 310289
this patch updates the cost of addq\subq (add\subtract of vectors of 64bits)
based on the performance numbers of SLM arch.
Differential Revision: https://reviews.llvm.org/D33983
llvm-svn: 306974
The cost of an interleaved access was only implemented for AVX512. For other
X86 targets an overly conservative Base cost was returned, resulting in
avoiding vectorization where it is actually profitable to vectorize.
This patch starts to add costs for AVX2 for most prominent cases of
interleaved accesses (stride 3,4 chars, for now).
Note1: Improvements of up to ~4x were observed in some of EEMBC's rgb
workloads; There is also a known issue of 15-30% degradations on some of these
workloads, associated with an interleaved access followed by type
promotion/widening; the resulting shuffle sequence is currently inefficient and
will be improved by a series of patches that extend the X86InterleavedAccess pass
(such as D34601 and more to follow).
Note 2: The costs in this patch do not reflect port pressure penalties which can
be very dominant in the case of interleaved accesses since most of the shuffle
operations are restricted to a single port. Further tuning, that may incorporate
these considerations, will be done on top of the upcoming improved shuffle
sequences (that is, along with the abovementioned work to extend
X86InterleavedAccess pass).
Differential Revision: https://reviews.llvm.org/D34023
llvm-svn: 306238
There are a couple of potential improvements as seen in the IR and asm:
1. We're unnecessarily extending to a larger type to compare values.
2. The codegen for (select cond, 1, -1) could avoid a cmov.
(or we could change the order of the compares, so we have a select with 0 operand)
llvm-svn: 305802
This seems to be interacting badly with ASan somehow, causing false reports of
heap-buffer overflows: PR33514.
> Summary:
> The patch makes instruction count the highest priority for
> LSR solution for X86 (previously registers had highest priority).
>
> Reviewers: qcolombet
>
> Differential Revision: http://reviews.llvm.org/D30562
>
> From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 305720
Summary:
The patch makes instruction count the highest priority for
LSR solution for X86 (previously registers had highest priority).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D30562
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 304824
Summary:
Expanding the loop idiom test for memcpy to also recognize
unordered atomic memcpy. The only difference for recognizing
an unordered atomic memcpy and instead of a normal memcpy is
that the loads and/or stores involved are unordered atomic operations.
Background: http://lists.llvm.org/pipermail/llvm-dev/2017-May/112779.html
Patch by Daniel Neilson!
Reviewers: reames, anna, skatkov
Reviewed By: reames, anna
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33243
llvm-svn: 304806
Account for subvector extraction/insertion, helps prevent the vectorizers from selecting 256-bit vectors that will have to be split anyhow on AVX1 targets.
llvm-svn: 302378
getArithmeticInstrCost(), getShuffleCost(), getCastInstrCost(),
getCmpSelInstrCost(), getVectorInstrCost(), getMemoryOpCost(),
getInterleavedMemoryOpCost() implemented.
Interleaved access vectorization enabled.
BasicTTIImpl::getCastInstrCost() improved to check for legal extending loads,
in which case the cost of the z/sext instruction becomes 0.
Review: Ulrich Weigand, Renato Golin.
https://reviews.llvm.org/D29631
llvm-svn: 300052
Summary:
LSV wants to know the maximum size that can be loaded to a vector register.
On X86, this always matches the maximum register width. Implement this
accordingly and add a test to make sure that LSV can vectorize up to the
maximum permissible width on X86.
Reviewers: delena, arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D31504
llvm-svn: 299589
getIntrinsicInstrCost() used to only compute scalarization cost based on types.
This patch improves this so that the actual arguments are checked when they are
available, in order to handle only unique non-constant operands.
Tests updates:
Analysis/CostModel/X86/arith-fp.ll
Transforms/LoopVectorize/AArch64/interleaved_cost.ll
Transforms/LoopVectorize/ARM/interleaved_cost.ll
The improvement in getOperandsScalarizationOverhead() to differentiate on
constants made it necessary to update the interleaved_cost.ll tests even
though they do not relate to intrinsics.
Review: Hal Finkel
https://reviews.llvm.org/D29540
llvm-svn: 297705
Refactoring to remove duplications of this method.
New method getOperandsScalarizationOverhead() that looks at the present unique
operands and add extract costs for them. Old behaviour was to just add extract
costs for one operand of the type always, which still happens in
getArithmeticInstrCost() if no operands are provided by the caller.
This is a good start of improving on this, but there are more places
that can be improved by using getOperandsScalarizationOverhead().
Review: Hal Finkel
https://reviews.llvm.org/D29017
llvm-svn: 293155
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
llvm-svn: 291657
The 'fast' costs should only work for shifts by uniform constants (uniform non-constant are lowered using the slow default implementation).
Logical shifts were not taking into account that we must mask the psrlw result, so the costs needed to be doubled.
Added missing AVX2/AVX512BW costs as well.
llvm-svn: 291391
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Differential Revision: https://reviews.llvm.org/D27518
llvm-svn: 291106
X86 target does not provide any target specific cost calculation for interleave patterns.It uses the common target-independent calculation, which gives very high numbers. As a result, the scalar version is chosen in many cases. The situation on AVX-512 is even worse, since we have 3-src shuffles that significantly reduce the cost.
In this patch I calculate the cost on AVX-512. It will allow to compare interleave pattern with gather/scatter and choose a better solution (PR31426).
* Shiffle-broadcast cost will be changed in Simon's upcoming patch.
Differential Revision: https://reviews.llvm.org/D28118
llvm-svn: 290810
Add explicit v16i16/v32i8 ADD/SUB costs, matching the costs of v4i64/v8i32 - they were missing for some reason.
This has side effects on the LV max bandwidth tests (AVX1 now prefers 128-bit vectors vs AVX2 which still prefers 256-bit)
llvm-svn: 286832
This patch avoids scalarization of CTLZ by instead expanding to use CTPOP (ref: "Hacker's Delight") when the necessary operations are available.
This also adds the necessary cost models for X86 SSE2 targets (the main beneficiary) to ensure vectorization only happens when its useful.
Differential Revision: https://reviews.llvm.org/D25910
llvm-svn: 286233
There is a bug describing poor cost model for floating point operations:
Bug 29083 - [X86][SSE] Improve costs for floating point operations. This
patch is the second one in series of patches dealing with cost model.
Differential Revision: https://reviews.llvm.org/D25722
llvm-svn: 285564
With DQI but without VLX, lower v2i64 and v4i64 MUL operations with v8i64 MUL (vpmullq).
Updated cost table accordingly.
Differential Revision: https://reviews.llvm.org/D26011
llvm-svn: 285304
We were defaulting to SSE2 costs which weren't taking into account the availability of PBLENDW/PBLENDVB to improve merging of per-element shift results.
llvm-svn: 284939
We weren't accounting for legal types on every subtarget, meaning that many of the costs were using defaults.
We still don't correctly cost (or test) the 512-bit sdiv/udiv by uniform const cases, nor the power-of-2 cases.
llvm-svn: 284744
As discussed on PR28461 we currently miss the chance to lower "fptosi <2 x double> %arg to <2 x i32>" to cvttpd2dq due to its use of illegal types.
This patch adds support for fptosi to 2i32 from both 2f64 and 2f32.
It also recognises that cvttpd2dq zeroes the upper 64-bits of the xmm result (similar to D23797) - we still don't do this for the cvttpd2dq/cvttps2dq intrinsics - this can be done in a future patch.
Differential Revision: https://reviews.llvm.org/D23808
llvm-svn: 284459
The current Cost Model implementation is very inaccurate and has to be
updated, improved, re-implemented to be able to take into account the
concrete CPU models and the concrete targets where this Cost Model is
being used. For example, the Latency Cost Model should be differ from
Code Size Cost Model, etc.
This patch is the first step to launch the developing and implementation
of a new Cost Model generation.
Differential Revision: https://reviews.llvm.org/D25186
llvm-svn: 284012
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
This reverts commit r278048. Something changed between the last time I
built this--it takes awhile on my ridiculously slow and ancient
computer--and now that broke this.
llvm-svn: 278053
Summary:
Based on two patches by Michael Mueller.
This is a target attribute that causes a function marked with it to be
emitted as "hotpatchable". This particular mechanism was originally
devised by Microsoft for patching their binaries (which they are
constantly updating to stay ahead of crackers, script kiddies, and other
ne'er-do-wells on the Internet), but is now commonly abused by Windows
programs to hook API functions.
This mechanism is target-specific. For x86, a two-byte no-op instruction
is emitted at the function's entry point; the entry point must be
immediately preceded by 64 (32-bit) or 128 (64-bit) bytes of padding.
This padding is where the patch code is written. The two byte no-op is
then overwritten with a short jump into this code. The no-op is usually
a `movl %edi, %edi` instruction; this is used as a magic value
indicating that this is a hotpatchable function.
Reviewers: majnemer, sanjoy, rnk
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D19908
llvm-svn: 278048
Shifts with a uniform but non-constant count were considered very expensive to
vectorize, because the splat of the uniform count and the shift would tend to
appear in different blocks. That made the splat invisible to ISel, and we'd
scalarize the shift at codegen time.
Since r201655, CodeGenPrepare sinks those splats to be next to their use, and we
are able to select the appropriate vector shifts. This updates the cost model to
to take this into account by making shifts by a uniform cheap again.
Differential Revision: https://reviews.llvm.org/D23049
llvm-svn: 277782
This patch adds costs for the vectorized implementations of CTPOP, the default values were seriously underestimating the cost of these and was encouraging vectorization on targets where serialized use of POPCNT would be much better.
Differential Revision: https://reviews.llvm.org/D22456
llvm-svn: 276104
Make some AVX and AVX512 cast costs more precise.
Based on part of a patch by Elena Demikhovsky (D15604).
Differential Revision: http://reviews.llvm.org/D22064
llvm-svn: 275106
This is "cvtdq2ps" which does not appear to be particularly slow on any CPU
according to Agner's tables. Choosing "5" as a cost here as suggested in:
https://llvm.org/bugs/show_bug.cgi?id=21356
...but it seems very conservative given that the instruction is fully pipelined,
and I think these costs are supposed to model throughput.
Note that related costs are also most likely too high, but this fixes PR21356
and partly fixes PR28434.
llvm-svn: 274658
Cast cost tables are now sorted, for each cast type, lexicographically on
[source base type, source vector width, dest base type, base vector width].
llvm-svn: 274653
The BSWAP of vector types is quite efficiently implemented using vector shuffles on SSE/AVX targets, we should reflect the typical cost of this to encourage vectorization.
Differential Revision: http://reviews.llvm.org/D21521
llvm-svn: 273217
The costs are somewhat hand-wavy, but should be much closer to the truth
than what we get from BasicTTI.
Differential Revision: http://reviews.llvm.org/D21156
llvm-svn: 272406
By making pointer extraction from a vector more expensive in the cost model,
we avoid the vectorization of a loop that is very likely to be memory-bound:
https://llvm.org/bugs/show_bug.cgi?id=27826
There are still bugs related to this, so we may need a more general solution
to avoid vectorizing obviously memory-bound loops when we don't have HW gather
support.
Differential Revision: http://reviews.llvm.org/D20601
llvm-svn: 270729
As discussed on PR24888, until SSE42 we don't have access to PCMPGTQ for v2i64 comparisons, but the cost models don't reflect this, resulting in over-optimistic vectorizaton.
This patch adds SSE2 'base level' costs that match what a typical target is capable of and only reduces the v2i64 costs at SSE42.
Technically SSE41 provides a PCMPEQQ v2i64 equality test, but as getCmpSelInstrCost doesn't give us a way to discriminate between comparison test types we can't easily make use of this, otherwise we could split the cost of integer equality and greater-than tests to give better costings of each.
Differential Revision: http://reviews.llvm.org/D20057
llvm-svn: 268972
Summary:
rL256194 transforms truncations between vectors of integers into PACKUS/PACKSS
operations during DAG combine. This generates better code for truncate, so cost
of truncate needs to be changed but looks like it got changed only in SSE2 table
Whereas this change is also applicable for SSE4.1, so the cost of truncate needs
to be changed for that as well. Cost of “TRUNCATE v16i32 to v16i8” & “TRUNCATE
v16i16 to v16i8” should be same in SSE4.1 & SSE2 table. Removing their cost from
SSE4.1, so it will fall back to SSE2.
Reviewers: Simon Pilgrim
llvm-svn: 267123
This code was creating a new type in the global context, regardless
of which context the user is sitting in, what can possibly go wrong?
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266275
The irony of this patch is that one CPU that is affected is AMD Jaguar, and Jaguar
has a completely double-pumped AVX implementation. But getting the cost model to
reflect that is a much bigger problem. The small goal here is simply to improve on
the lie that !AVX2 == SandyBridge.
Differential Revision: http://reviews.llvm.org/D18000
llvm-svn: 263069
Use AVX1 FP instructions (vmaskmovps/pd) in place of the AVX2 int instructions (vpmaskmovd/q).
Differential Revision: http://reviews.llvm.org/D16528
llvm-svn: 258675
The cost is calculated for all X86 targets. When gather/scatter instruction
is not supported we calculate the cost of scalar sequence.
Differential revision: http://reviews.llvm.org/D15677
llvm-svn: 256519
This patch transforms truncation between vectors of integers into
X86ISD::PACKUS/PACKSS operations during DAG combine. We don't do it in
lowering phase because after type legalization, the original truncation
will be turned into a BUILD_VECTOR with each element that is extracted
from a vector and then truncated, and from them it is difficult to do
this optimization. This greatly improves the performance of truncations
on some specific types.
Cost table is updated accordingly.
Differential revision: http://reviews.llvm.org/D14588
llvm-svn: 256194
This allows "icmp ugt %a, 4294967295" and "icmp uge %a, 4294967296" to be optimized into right shifts by 32 which can fold the immediate into the shift instruction. These patterns show up with some regularity in real code.
Unfortunately, since getImmCost can't see the icmp predicate we can't be tell if we're only catching these specific cases.
llvm-svn: 256126
Previously in the conversion cost table there are no entries for integer-integer
conversions on SSE2. This will result in imprecise costs for certain vectorized
operations. This patch adds those entries for SSE2 and SSE4.1. The cost numbers
are counted from the result of running llc on the new test case in this patch.
Differential revision: http://reviews.llvm.org/D15132
llvm-svn: 255315
I checked and updated the cost of AVX-512 conversion operations. Added cost of conversion operations in DQ mode.
Conversion of illegal types that requires vector split is not calculated right now (like for other X86 targets).
Differential Revision: http://reviews.llvm.org/D15074
llvm-svn: 254494
The masked intrinsics support all integer and floating point data types. I added the pointer type to this list.
Added tests for CodeGen and for Loop Vectorizer.
Updated the Language Reference.
Differential Revision: http://reviews.llvm.org/D14150
llvm-svn: 253544
This also lets us remove the versions of the functions that took a statically sized array as we can rely on ArrayRef implicit conversion now.
llvm-svn: 251490
This avoid mentioning the table name an extra time and allows the lookup to be done directly in the ifs by relying on the bool conversion of the pointer.
While there make use of ArrayRef and std::find_if.
llvm-svn: 251382
When the target does not support these intrinsics they should be converted to a chain of scalar load or store operations.
If the mask is not constant, the scalarizer will build a chain of conditional basic blocks.
I added isLegalMaskedGather() isLegalMaskedScatter() APIs.
Differential Revision: http://reviews.llvm.org/D13722
llvm-svn: 251237
Clang runtime failure was reported.
Assertion failed: (isExtended() && "Type is not extended!"), function getTypeForEVT
I'll need to add a proper handling for PointerType in masked load/store intrinsics.
llvm-svn: 250995
Originally I planned to use the same interface for masked gather/scatter and set isConsecutive to "false" in this case.
Now I'm implementing masked gather/scatter and see that the interface is inconvenient. I want to add interfaces isLegalMaskedGather() / isLegalMaskedScatter() instead of using the "Consecutive" parameter in the existing interfaces.
Differential Revision: http://reviews.llvm.org/D13850
llvm-svn: 250686
Most importantly, this keeps constant hoisting from preventing instruction selections ability to turn an AND with 0xffffffff into a move into a 32-bit subregister.
llvm-svn: 249370
The XOP shifts just have logical/arithmetic versions and the left/right shifts are controlled by whether the value is positive/negative. Because of this I've added new X86ISD nodes instead of trying to force them to use the existing shift nodes.
Additionally Excavator cores (bdver4) support XOP and AVX2 - meaning that it should use the AVX2 shifts when it can and fall back to XOP in other cases.
Differential Revision: http://reviews.llvm.org/D8690
llvm-svn: 248878
rather than 'unsigned' for their costs.
For something like costs in particular there is a natural "negative"
value, that of savings or saved cost. As a consequence, there is a lot
of code that subtracts or creates negative values based on cost, all of
which is prone to awkwardness or bugs when dealing with an unsigned
type. Similarly, we *never* want these values to wrap, as that would
cause Very Bad code generation (likely percieved as an infinite loop as
we try to emit over 2^32 instructions or some such insanity).
All around 'int' seems a much better fit for these basic metrics. I've
added asserts to ensure that at least the TTI interface never returns
negative numbers here. If we ever have a use case for negative numbers,
we can remove this, but this way a bug where someone used '-1' to
produce a 'very large' cost will be caught by the assert.
This passes all tests, and is also UBSan clean.
No functional change intended.
Differential Revision: http://reviews.llvm.org/D11741
llvm-svn: 244080
This patch vectorizes the v2i64/v4i64 ASHR shift operations - the last remaining integer vector shifts that are still being transferred to/from the scalar unit to be completed.
Differential Revision: http://reviews.llvm.org/D11439
llvm-svn: 243569
Reordered the data tables at the top and placed the lookups after. The first stage in the yak shaving necessary to get more accurate costs for a variety of targets given the recent improvements to SINT_TO_FP/UINT_TO_FP/SIGN_EXTEND vector lowering.
llvm-svn: 242643
While the v4i32 shl operation is already vectorized using a cvttps2dq/pmulld pattern, the lshr/ashr opeations are still scalarized.
This patch adds vectorization support for non-uniform v4i32 shift operations - it splats constant shift amounts to allow them to use the immediate sse shift instructions, or extracts/zero-extends non-constant shift amounts. The individual results are then blended together.
Differential Revision: http://reviews.llvm.org/D11063
llvm-svn: 241989
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
This patch adds vectorization support for uniform constant i64 arithmetic shift right operators.
Differential Revision: http://reviews.llvm.org/D9645
llvm-svn: 241514
This checks subtarget feature compatibility for inlining by verifying
that the callee is a strict subset of the caller's features. This includes
the cpu as part of the subtarget we can get via the incoming functions as
the backend takes CPUs as feature sets.
This allows us to inline things like:
int foo() { return baz(); }
int __attribute__((target("sse4.2"))) bar() {
return foo();
}
so that generic code can be inlined into specialized functions.
llvm-svn: 241221
This patch ensures that SHL/SRL/SRA shifts for i8 and i16 vectors avoid scalarization. It builds on the existing i8 SHL vectorized implementation of moving the shift bits up to the sign bit position and separating the 4, 2 & 1 bit shifts with several improvements:
1 - SSE41 targets can use (v)pblendvb directly with the sign bit instead of performing a comparison to feed into a VSELECT node.
2 - pre-SSE41 targets were masking + comparing with an 0x80 constant - we avoid this by using the fact that a set sign bit means a negative integer which can be compared against zero to then feed into VSELECT, avoiding the need for a constant mask (zero generation is much cheaper).
3 - SRA i8 needs to be unpacked to the upper byte of a i16 so that the i16 psraw instruction can be correctly used for sign extension - we have to do more work than for SHL/SRL but perf tests indicate that this is still beneficial.
The i16 implementation is similar but simpler than for i8 - we have to do 8, 4, 2 & 1 bit shifts but less shift masking is involved. SSE41 use of (v)pblendvb requires that the i16 shift amount is splatted to both bytes however.
Tested on SSE2, SSE41 and AVX machines.
Differential Revision: http://reviews.llvm.org/D9474
llvm-svn: 239509
Part of D9474, this patch extends AVX2 v16i16 types to 2 x 8i32 vectors and uses i32 shift variable shifts before packing back to i16.
Adds AVX2 tests for v8i16 and v16i16
llvm-svn: 238149
The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
llvm-svn: 236613
base which it adds a single analysis pass to, to instead return the type
erased TargetTransformInfo object constructed for that TargetMachine.
This removes all of the pass variants for TTI. There is now a single TTI
*pass* in the Analysis layer. All of the Analysis <-> Target
communication is through the TTI's type erased interface itself. While
the diff is large here, it is nothing more that code motion to make
types available in a header file for use in a different source file
within each target.
I've tried to keep all the doxygen comments and file boilerplate in line
with this move, but let me know if I missed anything.
With this in place, the next step to making TTI work with the new pass
manager is to introduce a really simple new-style analysis that produces
a TTI object via a callback into this routine on the target machine.
Once we have that, we'll have the building blocks necessary to accept
a function argument as well.
llvm-svn: 227685
type erased interface and a single analysis pass rather than an
extremely complex analysis group.
The end result is that the TTI analysis can contain a type erased
implementation that supports the polymorphic TTI interface. We can build
one from a target-specific implementation or from a dummy one in the IR.
I've also factored all of the code into "mix-in"-able base classes,
including CRTP base classes to facilitate calling back up to the most
specialized form when delegating horizontally across the surface. These
aren't as clean as I would like and I'm planning to work on cleaning
some of this up, but I wanted to start by putting into the right form.
There are a number of reasons for this change, and this particular
design. The first and foremost reason is that an analysis group is
complete overkill, and the chaining delegation strategy was so opaque,
confusing, and high overhead that TTI was suffering greatly for it.
Several of the TTI functions had failed to be implemented in all places
because of the chaining-based delegation making there be no checking of
this. A few other functions were implemented with incorrect delegation.
The message to me was very clear working on this -- the delegation and
analysis group structure was too confusing to be useful here.
The other reason of course is that this is *much* more natural fit for
the new pass manager. This will lay the ground work for a type-erased
per-function info object that can look up the correct subtarget and even
cache it.
Yet another benefit is that this will significantly simplify the
interaction of the pass managers and the TargetMachine. See the future
work below.
The downside of this change is that it is very, very verbose. I'm going
to work to improve that, but it is somewhat an implementation necessity
in C++ to do type erasure. =/ I discussed this design really extensively
with Eric and Hal prior to going down this path, and afterward showed
them the result. No one was really thrilled with it, but there doesn't
seem to be a substantially better alternative. Using a base class and
virtual method dispatch would make the code much shorter, but as
discussed in the update to the programmer's manual and elsewhere,
a polymorphic interface feels like the more principled approach even if
this is perhaps the least compelling example of it. ;]
Ultimately, there is still a lot more to be done here, but this was the
huge chunk that I couldn't really split things out of because this was
the interface change to TTI. I've tried to minimize all the other parts
of this. The follow up work should include at least:
1) Improving the TargetMachine interface by having it directly return
a TTI object. Because we have a non-pass object with value semantics
and an internal type erasure mechanism, we can narrow the interface
of the TargetMachine to *just* do what we need: build and return
a TTI object that we can then insert into the pass pipeline.
2) Make the TTI object be fully specialized for a particular function.
This will include splitting off a minimal form of it which is
sufficient for the inliner and the old pass manager.
3) Add a new pass manager analysis which produces TTI objects from the
target machine for each function. This may actually be done as part
of #2 in order to use the new analysis to implement #2.
4) Work on narrowing the API between TTI and the targets so that it is
easier to understand and less verbose to type erase.
5) Work on narrowing the API between TTI and its clients so that it is
easier to understand and less verbose to forward.
6) Try to improve the CRTP-based delegation. I feel like this code is
just a bit messy and exacerbating the complexity of implementing
the TTI in each target.
Many thanks to Eric and Hal for their help here. I ended up blocked on
this somewhat more abruptly than I expected, and so I appreciate getting
it sorted out very quickly.
Differential Revision: http://reviews.llvm.org/D7293
llvm-svn: 227669
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
llvm-svn: 223348
This reverts commit r222632 (and follow-up r222636), which caused a host
of LNT failures on an internal bot. I'll respond to the commit on the
list with a reproduction of one of the failures.
Conflicts:
lib/Target/X86/X86TargetTransformInfo.cpp
llvm-svn: 222936
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
llvm-svn: 222632
AVX2 is available.
According to IACA, the new lowering has a throughput of 8 cycles instead of 13
with the previous one.
Althought this lowering kicks in some SPECs benchmarks, the performance
improvement was within the noise.
Correctness testing has been done for the whole range of uint32_t with the
following program:
uint4 v = (uint4) {0,1,2,3};
uint32_t i;
//Check correctness over entire range for uint4 -> float4 conversion
for( i = 0; i < 1U << (32-2); i++ )
{
float4 t = test(v);
float4 c = correct(v);
if( 0xf != _mm_movemask_ps( t == c ))
{
printf( "Error @ %vx: %vf vs. %vf\n", v, c, t);
return -1;
}
v += 4;
}
Where "correct" is the old lowering and "test" the new one.
The patch adds a test case for the two custom lowering instruction.
It also modifies the vector cost model, which is why cast.ll and uitofp.ll are
modified.
2009-02-26-MachineLICMBug.ll is also modified because we now hoist 7
instructions instead of 4 (3 more constant loads).
rdar://problem/18153096>
llvm-svn: 221657
"Unroll" is not the appropriate name for this variable. Clang already uses
the term "interleave" in pragmas and metadata for this.
Differential Revision: http://reviews.llvm.org/D5066
llvm-svn: 217528
This patch adds support to recognize division by uniform power of 2 and modifies the cost table to vectorize division by uniform power of 2 whenever possible.
Updates Cost model for Loop and SLP Vectorizer.The cost table is currently only updated for X86 backend.
Thanks to Hal, Andrea, Sanjay for the review. (http://reviews.llvm.org/D4971)
llvm-svn: 216371
This lets us experiment with 512-bit vectorization without passing
force-vector-width manually.
The code generated for a simple integer memset loop is properly vectorized.
Disassembly is still broken for it though :(.
llvm-svn: 212634
Dorit Nuzman