When removing a non-constant store to a global in
CleanupPointerRootUsers(), the GlobalOpt pass could incorrectly return
false.
This was caught using the check introduced by D80916.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86149
Relanded since the buildbot issue was unrelated to this commit.
When hoisting simple values out from a loop, and an optsize attribute, a
convergent call, or an invoke instruction hindered the pass from
unswitching the loop, the pass would return an incorrect Modified
status.
This was caught using the check introduced by D80916.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D86085
This reverts commit dfd447c220.
After I pushed this commit, llvm-sphinx-docs started failing, due to:
Warning, treated as error:
extension 'recommonmark' has no setup() function;
is it really a Sphinx extension module?
I don't see how this commit may have caused that, but I'm still
reverting it since I don't know how to proceed with that
troubleshooting.
When sampling from images with coordinates that only have 16 bit
accuracy, convert the image intrinsic call to use a16 or g16.
This does only happen if the target hardware supports it.
An alternative would be to always apply this combination, independent of
the target hardware and extend 16 bit arguments to 32 bit arguments
during legalization. To me, this sounds like an unnecessary roundtrip
that could prevent some further InstCombine optimizations.
Differential Revision: https://reviews.llvm.org/D85887
The `UnrollMaxBlockToAnalyze` parameter is used at the stage when we have no
information about a loop body BB cost. In some cases, e.g. for simple loop
```
for(int i=0; i<32; ++i){
D = Arr2[i*8 + C1];
Arr1[i*64 + C2] += C3 * D;
Arr1[i*64 + C2 + 2048] += C4 * D;
}
```
current default parameter value is not enough to run deeper cost analyze so the
loop is not completely unrolled.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D86248
When hoisting simple values out from a loop, and an optsize attribute, a
convergent call, or an invoke instruction hindered the pass from
unswitching the loop, the pass would return an incorrect Modified
status.
This was caught using the check introduced by D80916.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D86085
Comparison against null is a common pattern that usually is followed by
error handling code and the likes. We now use AANonNull to simplify
these comparisons optimistically in order to make more code dead early
on.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D86145
`AADereferenceable::getAssumedDereferenceableBytes()` is actually
deducing `dereferenceable_or_null`. We should not use that information
to deduce `nonnull`, since it doesn't imply `nonnull`.
This commits breaks certain OpenMP codes (on power) because it expanded
the Attributor scope without telling the Attributor about the SCC
extend. See: https://reviews.llvm.org/D85544#2227611
This reverts commit b0b32e6490.
-force-attribute adds an attribute to function via command-line.
However, there was no counter-part to remove an attribute. This patch
adds -force-remove-attribute that removes an attribute from function.
Differential Revision: https://reviews.llvm.org/D85586
D81345 appears to accidentally disables vectorization when explicitly
enabled. As PGSO isn't currently accessible from LoopAccessInfo, revert back to
the vectorization with versioning-for-unit-stride for PGSO.
Differential Revision: https://reviews.llvm.org/D85784
canBeMovedDownwards checks if the "wait" counterpart of __tgt_target_data_begin_mapper can be moved downwards, returning a pointer to the instruction that might require/modify the data transferred, and returning null it the movement is not possible or not worth it. The function splitTargetDataBeginRTC receives that returned instruction and instead of moving the "wait" it creates it at that point.
Differential Revision: https://reviews.llvm.org/D86155
Introduce two new AAs. AAICVTrackerFunctionReturned which checks if a
function can have a unique ICV value after it is finished, and
AAICVCallSiteReturned which checks AAICVTrackerFunctionReturned for a
call site. This enables us to check the value of a call and if it
changes the ICV. This also changes the approach in
`getReplacementValues()` to a worklist-based approach so we can explore
all relevant BBs.
Differential Revision: https://reviews.llvm.org/D85544
While it may seem like we can just "deduplicate" the case where
some basic block happens to be a predecessor more than once,
which happens for e.g. switches, that is not correct thing to do.
We must actually add a PHI operand for each predecessor.
This was initially reported to me by David Major
as a clang crash during gecko build for android.
This patch introduces a new abstract attribute `AANoUndef` which corresponds to `noundef` IR attribute and deduce them.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85184
Before this change we looked through all memory operations in a function
even if the first was an unknown call that could do anything. This did
cost a lot of time but there is little use to do so. We also avoid
creating AAs for things that we would have looked at in case no other AA
will; that is the reason for the test changes.
Running only the attributor-cgscc pass on a IR version of
`llvm-test-suite/MultiSource/Applications/SPASS/clause.c` reduced the
time we spend in `AAMemoryLocation::update` from 4% total to
0.9% (disclaimer: no accurate measurements).
Before we tired to create a dominator tree for a declaration when we
wanted to determine if the function pointer is `nonnull`. We now avoid
looking at global values if `Value::getPointerDereferenceableBytes` not
already determined `nonnull`.
WIP that tries to hide the latency of runtime calls that involve host to
device memory transfers by splitting them into their "issue" and "wait"
versions. The "issue" is moved upwards as much as possible. The "wait" is
moved downards as much as possible. The "issue" issues the memory transfer
asynchronously, returning a handle. The "wait" waits in the returned
handle for the memory transfer to finish. We still lack of the movement.
Different training algorithms may produce models that, besides the main
policy output (i.e. inline/don't inline), produce additional outputs
that are necessary for the next training stage. To facilitate this, in
development mode, we require the training policy infrastructure produce
a description of the outputs that are interesting to it, in the form of
a JSON file. We special-case the first entry in the JSON file as the
inlining decision - we care about its value, so we can guide inlining
during training - but treat the rest as opaque data that we just copy
over to the training log.
Differential Revision: https://reviews.llvm.org/D85674
While the original implementation added in D85787 / ae7f08812e
is not incorrect, it is known to be suboptimal.
In particular, it is not incorrect to use the basic block
in which the original `insertvalue` instruction is located
as the merge point, that is not necessarily optimal,
as `@test6` shows.
We should look at all the AggElts, and, if they are all defined
in the same basic block, then that is the basic block we should use.
On RawSpeed library, this catches +4% (+50) more cases.
On vanilla LLVM test-suits, this catches +12% (+92) more cases.
This is NFC at the moment, because right now we always insert the PHI
into the same basic block in which the original `insertvalue` instruction
is, but that will change.
Also, fixes addition of the suffix to the value names.
this bug was causing miscompile.
now clang cant properly selfhost with -mllvm --enable-knowledge-retention
Reviewed By: jdoerfert, lebedev.ri
Differential Revision: https://reviews.llvm.org/D83507
Currently the code does not account for the fact that getDomMemoryDef
can be called with ScanLimit == 0, if we reached the limit while
processing an earlier access. Also tighten the check a bit more and bump
the scan limit now that it is handled properly.
In some cases, this brings a 2x speedup in terms of compile-time.
If we can't identify alloca used in lifetime marker we
need to assume to worst case scenario.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D84630
This pattern happens in clang C++ exception lowering code, on unwind branch.
We end up having a `landingpad` block after each `invoke`, where RAII
cleanup is performed, and the elements of an aggregate `{i8*, i32}`
holding exception info are `extractvalue`'d, and we then branch to common block
that takes extracted `i8*` and `i32` elements (via `phi` nodes),
form a new aggregate, and finally `resume`'s the exception.
The problem is that, if the cleanup block is effectively empty,
it shouldn't be there, there shouldn't be that `landingpad` and `resume`,
said `invoke` should be a `call`.
Indeed, we do that simplification in e.g. SimplifyCFG `SimplifyCFGOpt::simplifyResume()`.
But the thing is, all this extra `extractvalue` + `phi` + `insertvalue` cruft,
while it is pointless, does not look like "empty cleanup block".
So the `SimplifyCFGOpt::simplifyResume()` fails, and the exception is has
higher cost than it could have on unwind branch :S
This doesn't happen *that* often, but it will basically happen once per C++
function with complex CFG that called more than one other function
that isn't known to be `nounwind`.
I think, this is a missing fold in InstCombine, so i've implemented it.
I think, the algorithm/implementation is rather self-explanatory:
1. Find a chain of `insertvalue`'s that fully tell us the initializer of the aggregate.
2. For each element, try to find from which aggregate it was extracted.
If it was extracted from the aggregate with identical type,
from identical element index, great.
3. If all elements were found to have been extracted from the same aggregate,
then we can just use said original source aggregate directly,
instead of re-creating it.
4. If we fail to find said aggregate when looking only in the current block,
we need be PHI-aware - we might have different source aggregate when coming
from each predecessor.
I'm not sure if this already handles everything, and there are some FIXME's,
i'll deal with all that later in followups.
I'd be fine with going with post-commit review here code-wise,
but just in case there are thoughts, i'm posting this.
On RawSpeed, for example, this has the following effect:
```
| statistic name | baseline | proposed | Δ | % | abs(%) |
|---------------------------------------------------|---------:|---------:|------:|--------:|-------:|
| instcombine.NumAggregateReconstructionsSimplified | 0 | 1253 | 1253 | 0.00% | 0.00% |
| simplifycfg.NumInvokes | 948 | 1355 | 407 | 42.93% | 42.93% |
| instcount.NumInsertValueInst | 4382 | 3210 | -1172 | -26.75% | 26.75% |
| simplifycfg.NumSinkCommonCode | 574 | 458 | -116 | -20.21% | 20.21% |
| simplifycfg.NumSinkCommonInstrs | 1154 | 921 | -233 | -20.19% | 20.19% |
| instcount.NumExtractValueInst | 29017 | 26397 | -2620 | -9.03% | 9.03% |
| instcombine.NumDeadInst | 166618 | 174705 | 8087 | 4.85% | 4.85% |
| instcount.NumPHIInst | 51526 | 50678 | -848 | -1.65% | 1.65% |
| instcount.NumLandingPadInst | 20865 | 20609 | -256 | -1.23% | 1.23% |
| instcount.NumInvokeInst | 34023 | 33675 | -348 | -1.02% | 1.02% |
| simplifycfg.NumSimpl | 113634 | 114708 | 1074 | 0.95% | 0.95% |
| instcombine.NumSunkInst | 15030 | 14930 | -100 | -0.67% | 0.67% |
| instcount.TotalBlocks | 219544 | 219024 | -520 | -0.24% | 0.24% |
| instcombine.NumCombined | 644562 | 645805 | 1243 | 0.19% | 0.19% |
| instcount.TotalInsts | 2139506 | 2135377 | -4129 | -0.19% | 0.19% |
| instcount.NumBrInst | 156988 | 156821 | -167 | -0.11% | 0.11% |
| instcount.NumCallInst | 1206144 | 1207076 | 932 | 0.08% | 0.08% |
| instcount.NumResumeInst | 5193 | 5190 | -3 | -0.06% | 0.06% |
| asm-printer.EmittedInsts | 948580 | 948299 | -281 | -0.03% | 0.03% |
| instcount.TotalFuncs | 11509 | 11507 | -2 | -0.02% | 0.02% |
| inline.NumDeleted | 97595 | 97597 | 2 | 0.00% | 0.00% |
| inline.NumInlined | 210514 | 210522 | 8 | 0.00% | 0.00% |
```
So we manage to increase the amount of `invoke` -> `call` conversions in SimplifyCFG by almost a half,
and there is a very apparent decrease in instruction and basic block count.
On vanilla llvm-test-suite:
```
| statistic name | baseline | proposed | Δ | % | abs(%) |
|---------------------------------------------------|---------:|---------:|------:|--------:|-------:|
| instcombine.NumAggregateReconstructionsSimplified | 0 | 744 | 744 | 0.00% | 0.00% |
| instcount.NumInsertValueInst | 2705 | 2053 | -652 | -24.10% | 24.10% |
| simplifycfg.NumInvokes | 1212 | 1424 | 212 | 17.49% | 17.49% |
| instcount.NumExtractValueInst | 21681 | 20139 | -1542 | -7.11% | 7.11% |
| simplifycfg.NumSinkCommonInstrs | 14575 | 14361 | -214 | -1.47% | 1.47% |
| simplifycfg.NumSinkCommonCode | 6815 | 6743 | -72 | -1.06% | 1.06% |
| instcount.NumLandingPadInst | 14851 | 14712 | -139 | -0.94% | 0.94% |
| instcount.NumInvokeInst | 27510 | 27332 | -178 | -0.65% | 0.65% |
| instcombine.NumDeadInst | 1438173 | 1443371 | 5198 | 0.36% | 0.36% |
| instcount.NumResumeInst | 2880 | 2872 | -8 | -0.28% | 0.28% |
| instcombine.NumSunkInst | 55187 | 55076 | -111 | -0.20% | 0.20% |
| instcount.NumPHIInst | 321366 | 320916 | -450 | -0.14% | 0.14% |
| instcount.TotalBlocks | 886816 | 886493 | -323 | -0.04% | 0.04% |
| instcount.TotalInsts | 7663845 | 7661108 | -2737 | -0.04% | 0.04% |
| simplifycfg.NumSimpl | 886791 | 887171 | 380 | 0.04% | 0.04% |
| instcount.NumCallInst | 553552 | 553733 | 181 | 0.03% | 0.03% |
| instcombine.NumCombined | 3200512 | 3201202 | 690 | 0.02% | 0.02% |
| instcount.NumBrInst | 741794 | 741656 | -138 | -0.02% | 0.02% |
| simplifycfg.NumHoistCommonInstrs | 14443 | 14445 | 2 | 0.01% | 0.01% |
| asm-printer.EmittedInsts | 7978085 | 7977916 | -169 | 0.00% | 0.00% |
| inline.NumDeleted | 73188 | 73189 | 1 | 0.00% | 0.00% |
| inline.NumInlined | 291959 | 291968 | 9 | 0.00% | 0.00% |
```
Roughly similar effect, less instructions and blocks total.
See also: rGe492f0e03b01a5e4ec4b6333abb02d303c3e479e.
Compile-time wise, this appears to be roughly geomean-neutral:
http://llvm-compile-time-tracker.com/compare.php?from=39617aaed95ac00957979bc1525598c1be80e85e&to=b59866cf30420da8f8e3ca239ed3bec577b23387&stat=instructions
And this is a win size-wize in general:
http://llvm-compile-time-tracker.com/compare.php?from=39617aaed95ac00957979bc1525598c1be80e85e&to=b59866cf30420da8f8e3ca239ed3bec577b23387&stat=size-text
See https://bugs.llvm.org/show_bug.cgi?id=47060
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D85787
This reverts commit babb59496b.
This test addition was queued up with some unrelated changes,
but it seems more likely that we need to fix something internal
to -memcpyopt. Also, I'm not sure if including target-specifc
attributes in a generic regression test dir will cause bot
problems.
This change added a new inline advisor that takes optimization remarks from previous inlining as input, and provides the decision as advice so current inlining can replay inline decisions of a different compilation. Dwarf inline stack with line and discriminator is used as anchor for call sites including call context. The change can be useful for Inliner tuning as it provides a channel to allow external input for tweaking inline decisions. Existing alternatives like alwaysinline attribute is per-function, not per-callsite. Per-callsite inline intrinsic can be another solution (not yet existing), but it's intrusive to implement and also does not differentiate call context.
A switch -sample-profile-inline-replay=<inline_remarks_file> is added to hook up the new inline advisor with SampleProfileLoader's inline decision for replay. Since SampleProfileLoader does top-down inlining, inline decision can be specialized for each call context, hence we should be able to replay inlining accurately. However with a bottom-up inliner like CGSCC inlining, the replay can be limited due to lack of specialization for different call context. Apart from that limitation, the new inline advisor can still be used by regular CGSCC inliner later if needed for tuning purpose.
This is a resubmit of https://reviews.llvm.org/D83743
This patch internalize non-exact functions and replaces of their uses
with the internalized version. Doing this enables the analysis of
non-exact functions.
We can do this because some non-exact functions with the same name
whose linkage is `linkonce_odr` or `weak_odr` should have the same
semantics, so we can safely internalize and replace use of them (the
result of the other version of this function should be the same.).
Note that not all functions can be internalized, e.g., function with
`linkonce` or `weak` linkage.
For now when specified in commandline, we internalize all functions
that meet the requirements without calculating the cost of such
internalzation.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84167
This reverts commit 6dbf0cfcf7.
That commit caused failed assertions, e.g. like this:
$ cat sprintf-strcpy.c
char *ptr; void func(void) { ptr += sprintf(ptr, "%s", ""); }
$ clang -c sprintf-strcpy.c -O2 -target x86_64-linux-gnu
clang: ../lib/IR/Value.cpp:473: void llvm::Value::doRAUW(llvm::Value*,
llvm::Value::ReplaceMetadataUses): Assertion `New->getType() ==
getType() && "replaceAllUses of value with new value of different
type!"' failed.
These tests use the statepoint-example builtin gc which expects address space #1 to the only non-integral address space. The fact the test used as=0 happened to work, but was caught by a downstream assert. (Literally years ago, I just happened to notice the XFAIL and fix it now.)
The "gc-live" operand bundles were recently added, and all tests have been updated to use that format. A migration period was provided, though it's worth noting these intrinsics are experimental, so formally there is no compatibile requirement.
This is an extension to a96fc46. "gc-live" hadn't been implemented at the point that patch was initially posted.
Transformation creates big strings for big C values, so bail out for C > 128.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86004
This is in preparation for enabling proper handling of optnone under the
NPM. Most optimizations won't run on an optnone function.
Previously the test would rely on lots of optimizations to optimize the
IR into a simple infinite loop. This is an optnone function, so clearly
that shouldn't be the case.
This IR was found by printing the module before the LoopFullUnrollerPass ran.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D85578
When getUserCost was transitioned to use an explicit CostKind,
TCK_CodeSize was used even though the original kind was implicitly
SizeAndLatency so restore this behaviour. We now only query for
CodeSize when optimising for minsize.
I expect this to not change anything as, I think all, targets will
currently return the same value for CodeSize and SizeLatency. Indeed
I see no changes in the test suite for Arm, AArch64 and X86.
Differential Revision: https://reviews.llvm.org/D85829
Previously ConstantFoldExtractElementInstruction() would only work with
insertelement instructions, not contants. This properly handles
insertelement constants as well.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85865
Allow inlining only when the Callee has a subset of the Caller's
features. In principle, we should be able to inline regardless of any
features because WebAssembly supports features at module granularity,
not function granularity, but without this restriction it would be
possible for a module to "forget" about features if all the functions
that used them were inlined.
Requested in PR46812.
Differential Revision: https://reviews.llvm.org/D85494
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
This is a fixup to commit 43bdac2906, to make sure the
address space from the original load pointer is retained in the
vector pointer.
Resolves problem with
Assertion `castIsValid(op, S, Ty) && "Invalid cast!"' failed.
due to address space mismatch.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D85912
InstCombine adds users of transformed instruction to working list to
process on the same iteration. However gc.relocate may have a hidden
user (next gc.relocate) which is connected through gc.statepoint intrinsic and
there is no direct def-use chain between them.
In this case if the next gc.relocation is already processed it will not be added
to worklist and will not be able to be processed on the same iteration.
Let's we have the following case:
A = gc.relocate(null)
B = statepoint(A)
C = gc.relocate(B, hidden(A))
If C is already considered then after replacement of A with null, statepoint B
instruction will be added to the queue but not C.
C can be processed only on the next iteration.
If the chain of relocation is pretty long the many iteration may be required.
This change is to reduce the number of iteration to meet the latest changes
related to reducing infinite loop threshold.
This is a quick (not best) fix. In the follow up patches I plan to move gc relocation
handling into statepoint handler. This should also help to remove unused gc live
entries in statepoint bundle.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D75598
When removing instructions from unreachable blocks, and only debug info
intrinsics were removed, InstCombine could incorrectly return a false
Modified status.
This is fixed by making removeAllNonTerminatorAndEHPadInstructions()
also return how many debug info intrinsics that were removed, and take
that into account.
This was caught using the check introduced by D80916.
Reviewed By: majnemer
Differential Revision: https://reviews.llvm.org/D85839
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
We are re-using tryToMergePartialOverlappingStores, which requires
earlier to domiante Later. In the long run,
tryToMergeParialOverlappingStores should be re-written using MemorySSA.
Fixes PR46513.
This reverts commit e441b7a7a0.
This patch causes a compile error in tensorflow opensource project. The stack trace looks like:
Point of crash:
llvm/include/llvm/Analysis/LoopInfoImpl.h : line 35
(gdb) ptype *this
type = const class llvm::LoopBase<llvm::BasicBlock, llvm::Loop> [with BlockT = llvm::BasicBlock, LoopT = llvm::Loop]
(gdb) p *this
$1 = {ParentLoop = 0x0, SubLoops = std::vector of length 0, capacity 0, Blocks = std::vector of length 0, capacity 1,
DenseBlockSet = {<llvm::SmallPtrSetImpl<llvm::BasicBlock const*>> = {<llvm::SmallPtrSetImplBase> = {<llvm::DebugEpochBase> = {Epoch = 3}, SmallArray = 0x1b2bf6c8, CurArray = 0x1b2bf6c8,
CurArraySize = 8, NumNonEmpty = 0, NumTombstones = 0}, <No data fields>}, SmallStorage = {0xfffffffffffffffe, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}, IsInvalid = true}
(gdb) p *this->DenseBlockSet->CurArray
$2 = (const void *) 0xfffffffffffffffe
I will try to get a case from tensorflow or use creduce to get a small case.
This is a retry of rL300977 which was reverted because of infinite loops.
We have fixed all of the known places where that would happen, but there's
still a chance that this patch will cause infinite loops.
This matches the demanded bits behavior in the DAG and should fix:
https://bugs.llvm.org/show_bug.cgi?id=32706
Differential Revision: https://reviews.llvm.org/D32255
While x*undef is undef, shift-by-undef is poison,
which we must avoid introducing.
Also log2(iN undef) is *NOT* iN undef, because log2(iN undef) u< N.
See https://bugs.llvm.org/show_bug.cgi?id=47133
This recommits the following patches now that D85684 has landed
1cf6f210a2 [IR] Disable select ? C : undef -> C fold in ConstantFoldSelectInstruction unless we know C isn't poison.
469da663f2 [InstSimplify] Re-enable select ?, undef, X -> X transform when X is provably not poison
122b0640fc [InstSimplify] Don't fold vectors of partial undef in SimplifySelectInst if the non-undef element value might produce poison
ac0af12ed2 [InstSimplify] Add test cases for opportunities to fold select ?, X, undef -> X when we can prove X isn't poison
9b1e95329a [InstSimplify] Remove select ?, undef, X -> X and select ?, X, undef -> X transforms
When TTI was updated to use an explicit cost, TCK_CodeSize was used
although the default implicit cost would have been the hand-wavey
cost of size and latency. So, revert back to this behaviour. This is
not expected to have (much) impact on targets since most (all?) of
them return the same value for SizeAndLatency and CodeSize.
When optimising for size, the logic has been changed to query
CodeSize costs instead of SizeAndLatency.
This patch also adds a testing option in the unroller so that
OptSize thresholds can be specified.
Differential Revision: https://reviews.llvm.org/D85723
When visiting load and store instructions in SROA skip scalable vectors.
This is relevant in the implementation of the 'arm_sve_vector_bits'
attribute that is used to define VLS types, where an alloca of a
fixed-length vector could be bitcasted to scalable. See D85128 for more
information.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85725
Now that SCEVExpander can preserve LCSSA form,
we do not have to worry about LCSSA form when
trying to look through PHIs. SCEVExpander will take
care of inserting LCSSA PHI nodes as required.
This increases precision of the analysis in some cases.
Reviewed By: mkazantsev, bmahjour
Differential Revision: https://reviews.llvm.org/D71539
Without this patch, we attempt to distribute And over Xor even in
unsafe circumstances like so:
undef & (true ^ true) ==> (undef & true) ^ (undef & true)
and evaluate it to undef instead of false. Note that "true ^ true"
may show up implicitly with one true being part of a PHI node.
This patch fixes the problem by teaching SimplifyUsingDistributiveLaws
to not use undef as part of simplifications.
Reviewers: spatel, aqjune, nikic, lebedev.ri, fhahn, jdoerfert
Differential Revision: https://reviews.llvm.org/D85687
Introduce a helper on Instruction which can be used to update the debug
location after hoisting.
Use this in GVN and LICM, where we were mistakenly introducing new line
0 locations after hoisting (the docs recommend dropping the location in
this case).
For more context, see the discussion in https://reviews.llvm.org/D60913.
Differential Revision: https://reviews.llvm.org/D85670
We should be able to see that the new aggregate we have produced
is identical to the source aggregate from which we've extracted
the elements that we used to form a new aggregate.
This happens (a lot) in clang C++ exception code on unwind branch.
This reverts commit 52b71aa8b1.
The problem was a missing lit.local.cfg file, which was causing the
test to be incorrectly run on bots that had not built the WebAssembly
target.
8cc911fa5b refactored the `getIntrinsicInstrCost` function and was
meant to be a nonfunctional change, but it accidentally changed how
costs were calculated in the SLP vectorizer, which regressed
WebAssembly codegen and resulted in a downstream bug report at
https://github.com/emscripten-core/emscripten/issues/11449.
The fix for this regression is in D85759, and this patch just
pre-commits the test from that patch to demonstrate the regressed
behavior first.
I think this is the last remaining translation of an existing
instcombine transform for the corresponding cmp+sel idiom.
This interpretation is more general though - we can remove
mismatched signed/unsigned combinations in addition to the
more obvious cases.
min/max(X, Y) must produce X or Y as the result, so this is
just another clause in the existing transform that was already
matching a min/max of min/max.
The entries in VectorizableTree are not necessarily ordered by their
position in basic blocks. Collect them and order them by dominance so
later instructions are guaranteed to be visited first. For instructions
in different basic blocks, we only scan to the beginning of the block,
so their order does not matter, as long as all instructions in a basic
block are grouped together. Using dominance ensures a deterministic order.
The modified test case contains an example where we compute a wrong
spill cost (2) without this patch, even though there is no call between
any instruction in the bundle.
This seems to have limited practical impact, .e.g on X86 with a recent
Intel Xeon CPU with -O3 -march=native -flto on MultiSource,SPEC2000,SPEC2006
there are no binary changes.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D82444
This patch makes getEdgeValueLocal more precise when a freeze instruction is
given, by adding support for freeze into constantFoldUser
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84629
This patch enables `AAValueSimplify` to use information from `AAPotentialValues`
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85668
When we use mask compare intrinsics under strict FP option, the masked
elements shouldn't raise any exception. So, we cann't replace the
intrinsic with a full compare + "and" operation.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D85385
Replace the `ident_t` handling in Clang with the methods offered by the
OMPIRBuilder. This cuts down on the clang code as well as the
differences between the two, making further transitions easier. Tests
have changed but there should not be a real functional change. The most
interesting difference is probably that we stop generating local ident_t
allocations for now and just use globals. Given that this happens only
with debug info, the location part of the `ident_t` is probably bigger
than the test anyway. As the location part is already a global, we can
avoid the allocation, memcpy, and store in favor of a constant global
that is slightly bigger. This can be revisited if there are
complications.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D80735
for invoke instructions.
We see a warning of "No debug information found in function foo: Function
profile not used" in a case. The function foo is called by an invoke
instruction. It has no debug information because it has attribute((nodebug))
in the definition. It shouldn't have profile instance in the sample profile
but compiler thinks it does, that turns out to be a compiler bug in
findCalleeFunctionSamples. The bug is exposed when sample-profile-merge-inlinee
is enabled recently.
Currently in findCalleeFunctionSamples, CalleeName is unset and is empty for
invoke instruction. For empty CalleeName, findFunctionSamplesAt will treat
the call as an indirect call and will return any inline instance profile at
the same location as the instruction. That leads to a wrong profile being
returned to function foo.
The patch set CalleeName when the instruction is an invoke.
Differential Revision: https://reviews.llvm.org/D85664
A GlobalAlias is an address-taken user of its aliased function.
canRenameComdatFunc has excluded such cases.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D85597
Instructions defined in the original inner loop preheader may depend on
values defined in the outer loop header, but the inner loop header will
become the entry block in the loop nest. Move the instructions from the
preheader to the outer loop header, so we do not break dominance. We
also have to check for unsafe instructions in the preheader. If there
are no unsafe instructions, all instructions should be movable.
Currently we move all instructions except the terminator and rely on
LICM to hoist out invariant instructions later.
Fixes PR45743
Values defined in the outer loop header could be used in the inner loop
latch. In that case, we need to create LCSSA phis for them, because after
interchanging they will be defined in the new inner loop and used in the
new outer loop.
This patch adds noundef to return value and arguments of standard I/O functions.
With this patch, passing undef or poison to the functions becomes undefined
behavior in LLVM IR. Since undef/poison is lowered from operations having UB in C/C++,
passing undef to them was already UB in source.
With this patch, the functions cannot return undef or poison anymore as well.
According to C17 standard, ungetc/ungetwc/fgetpos/ftell can generate unspecified
value; 3.19.3 says unspecified value is a valid value of the relevant type,
and using unspecified value is unspecified behavior, which is not UB, so it
cannot be undef (using undef is UB when e.g. it is used at branch condition).
— The value of the file position indicator after a successful call to the ungetc function for a text stream, or the ungetwc function for any stream, until all pushed-back characters are read or discarded (7.21.7.10, 7.29.3.10).
— The details of the value stored by the fgetpos function (7.21.9.1).
— The details of the value returned by the ftell function for a text stream (7.21.9.4).
In the long run, most of the functions listed in BuildLibCalls should have noundefs; to remove redundant diffs which will anyway disappear in the future, I added noundef to a few more non-I/O functions as well.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85345
Making use of undef is not safe if the simplification result is not used
to replace all uses of the result. This leads to problems in NewGVN,
which does not replace all uses in the IR directly. See PR33165 for more
details.
This patch adds an option to SimplifyQuery to disable the use of undef.
Note that I've only guarded uses if isa<UndefValue>/m_Undef where
SimplifyQuery is currently available. If we agree on the general
direction, I'll update the remaining uses.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D84792
Add support for (if enabled) splitting cold functions into a separate section
in order to further boost locality of hot code.
Authored by: rjf (Ruijie Fang)
Reviewed by: hiraditya,rcorcs,vsk
Differential Revision: https://reviews.llvm.org/D85331
This patch was adjusted to match the most basic pattern that starts with an insertelement
(so there's no extract created here). Hopefully, that removes any concern about
interfering with other passes. Ie, the transform should almost always be profitable.
We could make an argument that this could be part of canonicalization, but we
conservatively try not to create vector ops from scalar ops in passes like instcombine.
If the transform is not profitable, the backend should be able to re-scalarize the load.
Differential Revision: https://reviews.llvm.org/D81766
Currently the SCEVExpander tries to re-use existing casts, even if they
are not exactly at the insertion point it was asked to create the cast.
To do so in some case, it creates a new cast at the insertion point and
updates all users to use the new cast.
This behavior is problematic, because it changes the IR outside of the
instructions created during the expansion. Therefore we cannot
completely undo all changes made during expansion.
This re-use should be only an extra optimization, so only using the new
cast in the expanded instructions should not be a correctness issue.
There are many cases equivalent instructions are created during
expansion.
This patch also adjusts findInsertPointAfter to skip instructions
inserted during expansion. This enables re-using existing casts without
the renaming any uses, by picking a better insertion point.
Reviewed By: efriedma, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84399
SimplifyCFG has two main folds for resumes - one when resume is directly
using the landingpad, and the other one where resume is using a PHI node.
While for the first case, we were already correctly ignoring all the
PHI nodes, and both the debug info intrinsics and lifetime intrinsics,
in the PHI-based-one, we weren't ignoring PHI's in the resume block,
and weren't ignoring lifetime intrinsics. That is clearly a bug.
On RawSpeed library, this results in +9.34% (+81) more invoke->call folds,
-0.19% (-39) landing pads, -0.24% (-81) invoke instructions
but +51 call instructions and -132 basic blocks.
Though, the run-time performance impact appears to be within the noise.
This patch adds an optimization that folds select(freeze(icmp eq/ne x, y), x, y)
to x or y.
This was needed to resolve slowdown after D84940 is applied.
I tried to bake this logic into foldSelectInstWithICmp, but it wasn't clear.
This patch conservatively writes the pattern in a separate function,
foldSelectWithFrozenICmp.
The output does not need freeze; https://alive2.llvm.org/ce/z/X49hNE (from @nikic)
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85533
This is a split patch of D80991.
This patch introduces AAPotentialValues and its interface only.
For more detail of AAPotentialValues abstract attribute, see the original patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83283
This patch is a follow up of D84733.
If a function has noundef attribute in returned position, instructions that return undef or poison value cause UB.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85178
Negator knows how to do this, but the one-use reasoning is getting
a bit muddy here, we don't really want to increase instruction count,
so we need to both lie that "IsNegation" and have an one-use check
on the outermost LHS value.
Multiplication is commutative, and either of operands can be negative,
so if the RHS is a negated power-of-two, we should try to make it
true power-of-two (which will allow us to turn it into a left-shift),
by trying to sink the negation down into LHS op.
But, we shouldn't re-invent the logic for sinking negation,
let's just use Negator for that.
Tests and original patch by: Simon Pilgrim @RKSimon!
Differential Revision: https://reviews.llvm.org/D85446
Summary:
This patch takes the indices operands of `insertelement`/`insertvalue`
into account while generation of seed elements for `findBuildAggregate()`.
This function has kept the original order of `insert`s before.
Also this patch optimizes `findBuildAggregate()` preventing it from
redundant temporary vector allocations and its multiple reversing.
Fixes llvm.org/pr44067
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83779
As mentioned in
http://lists.llvm.org/pipermail/llvm-dev/2020-July/143395.html,
loop-unswitch has not been ported to the NPM. Instead people are using
simple-loop-unswitch.
Pin all tests in Transforms/LoopUnswitch to legacy PM and replace all
other uses of loop-unswitch with simple-loop-unswitch.
One test that didn't fit into the above was
2014-06-21-congruent-constant.ll which seems to only pass with
loop-unswitch. That is also pinned to legacy PM.
Now all tests containing "-loop-unswitch" anywhere in the test succeed with
NPM turned on by default.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D85360
We don't want mandatory events in the training log. We do want to handle
them, to keep the native size accounting accurate, but that's all.
Fixed the code, also expanded the test to capture this.
Differential Revision: https://reviews.llvm.org/D85373
I skimmed the existing users of these matchers and don't see any problems
(eg, the caller assumes the matched value was a select instruction without checking).
So I think we can generalize the matching to allow the new intrinsics or the cmp+select idioms.
I did not find any unit tests for the matchers, so added some basics there. The instsimplify
tests are adapted from existing tests for the cmp+select pattern and cover the folds in
simplifyICmpWithMinMax().
Differential Revision: https://reviews.llvm.org/D85230
This is a simple patch that folds freeze(undef) into a proper constant after inspecting its uses.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D84948
Arm MVE has multiple instructions such as VMLAVA.s8, which (in this
case) can take two 128bit vectors, sign extend the inputs to i32,
multiplying them together and sum the result into a 32bit general
purpose register. So taking 16 i8's as inputs, they can multiply and
accumulate the result into a single i32 without any rounding/truncating
along the way. There are also reduction instructions for plain integer
add and min/max, and operations that sum into a pair of 32bit registers
together treated as a 64bit integer (even though MVE does not have a
plain 64bit addition instruction). So giving the vectorizer the ability
to use these instructions both enables us to vectorize at higher
bitwidths, and to vectorize things we previously could not.
In order to do that we need a way to represent that the reduction
operation, specified with a llvm.experimental.vector.reduce when
vectorizing for Arm, occurs inside the loop not after it like most
reductions. This patch attempts to do that, teaching the vectorizer
about in-loop reductions. It does this through a vplan recipe
representing the reductions that the original chain of reduction
operations is replaced by. Cost modelling is currently just done through
a prefersInloopReduction TTI hook (which follows in a later patch).
Differential Revision: https://reviews.llvm.org/D75069
This is the last JumpThreading patch for getting the performance numbers shown at
https://reviews.llvm.org/D84940#2184653 .
This patch makes ProcessBlock call ProcessBranchOnPHI when the branch condition
is freeze(phi) as well (originally it calls the function when the condition is
phi only).
Since what ProcessBranchOnPHI does is to duplicate the basic block into
predecessors if profitable, it is still valid when the condition is freeze(phi)
too.
```
p = phi [a, pred1] [b, pred2]
p.fr = freeze p
br p.fr, ...
=>
pred1:
p.fr = freeze a
br p.fr, ...
pred2:
p.fr2 = freeze b
br p.fr2, ...
```
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85029
We were errneously only doing that for old-style abs/nabs,
but we have no such legality check on the condition of the select.
https://rise4fun.com/Alive/xBHS
https://rise4fun.com/Alive/pZEr
Name: mul nuw with icmp eq
Pre: (C2 %u C1) != 0
%a = mul nuw i8 %x, C1
%r = icmp eq i8 %a, C2
=>
%r = false
Name: mul nuw with icmp ne
Pre: (C2 %u C1) != 0
%a = mul nuw i8 %x, C1
%r = icmp ne i8 %a, C2
=>
%r = true
There are potentially several other transforms we need to add based on:
D51625
...but it doesn't look like there was follow-up to that patch.
This reverts commit e9761688e4. It breaks the build:
```
~/src/llvm-project/llvm/lib/Analysis/IVDescriptors.cpp:868:10: error: no viable conversion from returned value of type 'SmallVector<[...], 8>' to function return type 'SmallVector<[...], 4>'
return ReductionOperations;
```
Arm MVE has multiple instructions such as VMLAVA.s8, which (in this
case) can take two 128bit vectors, sign extend the inputs to i32,
multiplying them together and sum the result into a 32bit general
purpose register. So taking 16 i8's as inputs, they can multiply and
accumulate the result into a single i32 without any rounding/truncating
along the way. There are also reduction instructions for plain integer
add and min/max, and operations that sum into a pair of 32bit registers
together treated as a 64bit integer (even though MVE does not have a
plain 64bit addition instruction). So giving the vectorizer the ability
to use these instructions both enables us to vectorize at higher
bitwidths, and to vectorize things we previously could not.
In order to do that we need a way to represent that the reduction
operation, specified with a llvm.experimental.vector.reduce when
vectorizing for Arm, occurs inside the loop not after it like most
reductions. This patch attempts to do that, teaching the vectorizer
about in-loop reductions. It does this through a vplan recipe
representing the reductions that the original chain of reduction
operations is replaced by. Cost modelling is currently just done through
a prefersInloopReduction TTI hook (which follows in a later patch).
Differential Revision: https://reviews.llvm.org/D75069
This was the most obvious regression in
f5df5cd5586ae9cfb2d9e53704dfc76f47aff149.f5df5cd5586ae9cfb2d9e53704dfc76f47aff149
We really don't want to do this if the original/outermost subtraction
isn't a negation, and therefore doesn't go away - just sinking negation
isn't a win. We are actually appear to be missing folds so hoist it.
https://rise4fun.com/Alive/tiVe
This reverts commit ac70b37a00
which reverted commit 8aeb2fe13a
because codegen tests got broken and i needed time to investigate.
This shows some regressions in tests, but they are all around GEP's,
so i'm not really sure how important those are.
https://rise4fun.com/Alive/1Gn
Fixed the commit c35585e209.
This is a fix for the bug 46098 where PostDominatorTree
is unexpectedly changed by InstCombine's branch swapping
transformation.
This patch fixes PostDomTree builder. While looking for
the furthest away node in a reverse unreachable subgraph
this patch runs DFS with successors in their function order.
This order is indifferent to the order of successors, so is
the furthest away node.
Reviewers: kuhar, nikic, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84763
This is a simple patch that makes freeze as a zero-cost instruction, as bitcast already is.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85023
This reverts commit c35585e209.
The MLIR is broken with this patch, reproduce by adding
-DLLVM_ENABLE_PROJECTS=mlir to the cmake configuration and
build `ninja tools/mlir/lib/IR/CMakeFiles/obj.MLIRIR.dir/Dominance.cpp.o`
This is another fix for the bug 46098 where PostDominatorTree
is unexpectedly changed by InstCombine's branch swapping
transformation.
This patch fixes PostDomTree builder. While looking for
the furthest away node in a reverse unreachable subgraph
this patch runs DFS with successors in their function order.
This order is indifferent to the order of successors, so is
the furthest away node.
Reviewers: kuhar, nikic, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84763
It is technically legal for optimizations to create an alloca that is
used by more than one dbg.declare, if one or both of them are inlined
instances of aliasing variables.
Differential Revision: https://reviews.llvm.org/D85172
This revision adds the following peephole optimization
and it's negation:
%a = urem i64 %x, %y
%b = icmp ule i64 %a, %x
====>
%b = true
With John Regehr's help this optimization was checked with Alive2
which suggests it should be valid.
This pattern occurs in the bound checks of Rust code, the program
const N: usize = 3;
const T = u8;
pub fn split_mutiple(slice: &[T]) -> (&[T], &[T]) {
let len = slice.len() / N;
slice.split_at(len * N)
}
the method call slice.split_at will check that len * N is within
the bounds of slice, this bounds check is after some transformations
turned into the urem seen above and then LLVM fails to optimize it
any further. Adding this optimization would cause this bounds check
to be fully optimized away.
ref: https://github.com/rust-lang/rust/issues/74938
Differential Revision: https://reviews.llvm.org/D85092
Teach SCCP to create notconstant lattice values from inequality
assumes and nonnull metadata, and update getConstant() to make
use of them. Additionally isOverdefined() needs to be changed to
consider notconstant an overdefined value.
Handling inequality branches is delayed until our branch on undef
story in other passes has been improved.
Differential Revision: https://reviews.llvm.org/D83643
This is based on the existing code for the non-intrinsic idioms
in InstCombine.
The vector constant constraint is non-obvious: undefs should be
ok in the outer call, but they can't propagate safely from the
inner call in all cases. Example:
https://alive2.llvm.org/ce/z/-2bVbM
define <2 x i8> @src(<2 x i8> %x) {
%0:
%m = umin <2 x i8> %x, { 7, undef }
%m2 = umin <2 x i8> { 9, 9 }, %m
ret <2 x i8> %m2
}
=>
define <2 x i8> @tgt(<2 x i8> %x) {
%0:
%m = umin <2 x i8> %x, { 7, undef }
ret <2 x i8> %m
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
<2 x i8> %x = < undef, undef >
Source:
<2 x i8> %m = < #x00 (0) [based on undef value], #x00 (0) >
<2 x i8> %m2 = < #x00 (0), #x00 (0) >
Target:
<2 x i8> %m = < #x07 (7), #x10 (16) >
Source value: < #x00 (0), #x00 (0) >
Target value: < #x07 (7), #x10 (16) >
As discussed in D84949, this removes the constraint to cast since it does not
cause compile time degradation.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D85188
This option was added a while back, to help improve AA around pointer
phi loops. It looks for phi(gep(phi, const), x) loops, checking if x can
then prove more precise aliasing info.
Differential Revision: https://reviews.llvm.org/D82998
Compared to the optimized code with branch conditions never frozen,
limiting the type of freeze's operand causes generation of suboptimal code in
some cases.
I would like to suggest removing the constraint, as this patch does.
If the number of freeze instructions becomes significant, this can be revisited.
Differential Revision: https://reviews.llvm.org/D84949
D68041 placed `__profc_`, `__profd_` and (if exists) `__profvp_` in different comdat groups.
There are some issues:
* Cost: one or two additional section headers (`.group` section(s)): 64 or 128 bytes on ELF64.
* `__profc_`, `__profd_` and (if exists) `__profvp_` should be retained or
discarded. Placing them into separate comdat groups is conceptually inferior.
* If the prevailing group does not include `__profvp_` (value profiling not
used) but a non-prevailing group from another translation unit has `__profvp_`
(the function is inlined into another and triggers value profiling), there
will be a stray `__profvp_` if --gc-sections is not enabled.
This has been fixed by 3d6f53018f.
Actually, we can reuse an existing symbol (we choose `__profd_`) as the group
signature to avoid a string in the string table (the sole reason that D68041
could improve code size is that `__profv_` was an otherwise unused symbol which
wasted string table space). This saves one or two section headers.
For a -DCMAKE_BUILD_TYPE=Release -DLLVM_BUILD_INSTRUMENTED=IR build, `ninja
clang lld`, the patch has saved 10.5MiB (2.2%) for the total .o size.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D84723
Currently, ArgPromotion may leave metadata uses of promoted values,
which will end up in the wrong function, creating invalid IR.
PR33641 fixed this for dead arguments, but it can be also be triggered
arguments with users that are promoted (see the updated test case).
We also have to drop uses to them after promoting them. We need to do
this after dealing with the non-metadata uses, so I also moved the empty
use case to the loop that deals with updating the arguments of the new
function.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D85127
Extend the memop value profile buckets to be more flexible (could accommodate a
mix of individual values and ranges) and to cover more value ranges (from 11 to
22 buckets).
Disabled behind a flag (to be enabled separately) and the existing code to be
removed later.
Differential Revision: https://reviews.llvm.org/D81682
In some cases, it seems like we can get rid of unnecessary s/umins by
using information from the loop guards (unless I am missing something).
One place where this seems to be helpful in practice is when computing
loop trip counts. This patch just changes howManyGreaterThans for now.
Note that this requires a loop for which we can check 'is guarded'.
On SPEC2000/SPEC2006/MultiSource, there are some notable changes for
some programs in the number of loops unrolled and trip counts computed.
```
Same hash: 179 (filtered out)
Remaining: 58
Metric: scalar-evolution.NumTripCountsComputed
Program base patch diff
test-suite...langs-C/compiler/compiler.test 25.00 31.00 24.0%
test-suite.../Applications/SPASS/SPASS.test 2020.00 2323.00 15.0%
test-suite...langs-C/allroots/allroots.test 29.00 32.00 10.3%
test-suite.../Prolangs-C/loader/loader.test 17.00 18.00 5.9%
test-suite...fice-ispell/office-ispell.test 253.00 265.00 4.7%
test-suite...006/450.soplex/450.soplex.test 3552.00 3692.00 3.9%
test-suite...chmarks/MallocBench/gs/gs.test 453.00 470.00 3.8%
test-suite...ngs-C/assembler/assembler.test 29.00 30.00 3.4%
test-suite.../Benchmarks/Ptrdist/bc/bc.test 263.00 270.00 2.7%
test-suite...rks/FreeBench/pifft/pifft.test 722.00 741.00 2.6%
test-suite...count/automotive-bitcount.test 41.00 42.00 2.4%
test-suite...0/253.perlbmk/253.perlbmk.test 1417.00 1451.00 2.4%
test-suite...000/197.parser/197.parser.test 387.00 396.00 2.3%
test-suite...lications/sqlite3/sqlite3.test 1168.00 1189.00 1.8%
test-suite...000/255.vortex/255.vortex.test 173.00 176.00 1.7%
Metric: loop-unroll.NumUnrolled
Program base patch diff
test-suite...langs-C/compiler/compiler.test 1.00 3.00 200.0%
test-suite.../Applications/SPASS/SPASS.test 134.00 234.00 74.6%
test-suite...count/automotive-bitcount.test 3.00 4.00 33.3%
test-suite.../Prolangs-C/loader/loader.test 3.00 4.00 33.3%
test-suite...langs-C/allroots/allroots.test 3.00 4.00 33.3%
test-suite...Source/Benchmarks/sim/sim.test 10.00 12.00 20.0%
test-suite...fice-ispell/office-ispell.test 21.00 25.00 19.0%
test-suite.../Benchmarks/Ptrdist/bc/bc.test 32.00 38.00 18.8%
test-suite...006/450.soplex/450.soplex.test 300.00 352.00 17.3%
test-suite...rks/FreeBench/pifft/pifft.test 60.00 69.00 15.0%
test-suite...chmarks/MallocBench/gs/gs.test 57.00 63.00 10.5%
test-suite...ngs-C/assembler/assembler.test 10.00 11.00 10.0%
test-suite...0/253.perlbmk/253.perlbmk.test 145.00 157.00 8.3%
test-suite...000/197.parser/197.parser.test 43.00 46.00 7.0%
test-suite...TimberWolfMC/timberwolfmc.test 205.00 214.00 4.4%
Geomean difference 7.6%
```
Fixes https://bugs.llvm.org/show_bug.cgi?id=46939
Fixes https://bugs.llvm.org/show_bug.cgi?id=46924 on X86.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D85046
The 1st try at this (rG2265d01f2a5b) exposed what looks like
unspecified behavior in C/C++ resulting in test variations.
The arguments to BinaryOperator::CreateAnd() were both IRBuilder
function calls, and the order in which they execute determines
the order of the new instructions in the IR. But the order of
function arg evaluation is not fixed by the rules of C/C++, so
depending on compiler config, the test would fail because the
test expected a single fixed ordering of instructions.
Original commit message:
I tried to use m_Deferred() on this, but didn't find
a clean way to do that.
http://bugs.llvm.org/PR46955https://alive2.llvm.org/ce/z/2h6QTq
No widening decisions will be computed for instructions outside the
loop. Do not try to get a widening decision. The load/store will be just
a scalar load, so treating at as normal should be fine I think.
Fixes PR46950.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D85087
This patch makes it possible to handle nonnull attribute violation at callsites in AAUndefinedBehavior.
If null pointer is passed to callee at a callsite and the corresponding argument of callee has nonnull attribute, the behavior of the callee is undefined.
In this patch, violations of argument nonnull attributes is only handled.
But violations of returned nonnull attributes can be handled and I will implement that in a follow-up patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84733
This is a split patch of D80991.
This patch introduces AAPotentialValues and its interface only.
For more detail of AAPotentialValues abstract attribute, see the original patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83283
It's always safe to pick the earlier abs regardless of the nsw flag. We'll just lose it if it is on the outer abs but not the inner abs.
Differential Revision: https://reviews.llvm.org/D85053
Negating the input doesn't matter. I left a FIXME to copy the nsw flag if its present on the neg but not on the abs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85055
abs() should be rare enough that using value tracking is not going
to be a compile-time cost burden, so use it to reduce a variety of
potential patterns. We do this in DAGCombiner too.
Differential Revision: https://reviews.llvm.org/D85043
querying getSCEV() for incomplete phis leads to wrong cache value in `ExprToIVMap`,
because incomplete phis may be simplified to same value before get SCEV expression.
Reviewed By: lebedev.ri, mkazantsev
Differential Revision: https://reviews.llvm.org/D77560
Add the optimizations we have in the SelectionDAG version.
Known non-negative copies all known bits. Any known one other than
the sign bit makes result non-negative.
Differential Revision: https://reviews.llvm.org/D85000
If absolute value needs turn a negative number into a positive number it reduces the number of sign bits by at most 1.
Differential Revision: https://reviews.llvm.org/D84971
A function call can be replicated by optimizations like loop unroll and jump threading and the replicates end up sharing the sample nested callee profile. Therefore when it comes to merging samples for uninlined callees in the sample profile inliner, a callee profile can be merged multiple times which will cause an assert to fire.
This change avoids merging same callee profile for duplicate callsites by filtering out callee profiles with a non-zero head sample count.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D84997
This patch allows SimplifyPartiallyRedundantLoad work when
the branch condition was frozen.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84944
David Stenberg