This patch fixes the reason of ubsan failure (UB detected)
happened after landing the D59638 (I had to revert it).
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/11760/steps/check-llvm%20ubsan/logs/stdio)
Problem is the following. Our implementation of GroupSection assumes that
its address is 4 bytes aligned when writes it:
template <class ELFT>
void ELFSectionWriter<ELFT>::visit(const GroupSection &Sec) {
ELF::Elf32_Word *Buf =
reinterpret_cast<ELF::Elf32_Word *>(Out.getBufferStart() + Sec.Offset);
...
But the test case for D59638 did not set AddressAlign in YAML. So address was
not 4 bytes aligned since Sec.Offset was odd. That triggered the issue.
This patch teaches llvm-objcopy to report an error for such sections (which should
not met in reality), what is better than having UB.
Differential revision: https://reviews.llvm.org/D59695
llvm-svn: 356853
Also fix up a couple of minor issues in the test being updated, where
FileCheck could match on incorrect output and fix the test case order to
match the struct order.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D59691
llvm-svn: 356746
Spec says about the first symbol table entry that index 0 both designates the first entry in the table
and serves as the undefined symbol index. It should have zero value.
Hence the first symbol table entry has no name. And so has to have a st_name == 0.
(http://refspecs.linuxbase.org/elf/gabi4+/ch4.symtab.html)
Currently, we do not emit zero value for the first symbol table entry.
That happens because we add empty strings to the string builder, which
for each such case adds a zero byte:
(https://github.com/llvm-mirror/llvm/blob/master/lib/MC/StringTableBuilder.cpp#L185)
After the string optimization performed it might return non zero indexes for the
empty string requested.
The patch fixes this issue for the case above and other sections with no names.
Differential revision: https://reviews.llvm.org/D59496
llvm-svn: 356739
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356738
GNU objcopy can support output formats like elf32-i386-freebsd and
elf64-x86-64-freebsd. The only difference from their regular non-freebsd
counterparts that I have observed is that the freebsd versions set the
OS/ABI field to ELFOSABI_FREEBSD. This patch sets the OS/ABI field
according based on the format whenever --output-format is specified.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59645
llvm-svn: 356737
If the compression was used and we had a symbol not involved in relocation,
we never updated its section and it was silently removed from the output.
Differential revision: https://reviews.llvm.org/D59542
llvm-svn: 356554
This fixes the https://bugs.llvm.org/show_bug.cgi?id=40980.
Previously if string optimization occurred as a result of
StringTableBuilder's finalize() method, the size wasn't updated.
This hopefully also makes the interaction between sections during finalization
processes a bit more clear.
Differential revision: https://reviews.llvm.org/D59488
llvm-svn: 356371
For ELF, we accept but ignore --only-keep-debug. Do the same for llvm-strip.
COFF does implement this, so update the test that it is supported.
llvm-svn: 356207
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
This is a reland of r356129, attempting to fix greendragon failures
due to a suspected compatibility issue with od on the greendragon bots
versus other versions.
llvm-svn: 356136
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
llvm-svn: 356129
error() was previously cleaned up from CopyConfig, but new uses were introduced.
This also tweaks the error message for --add-symbol to report all invalid flags.
llvm-svn: 356105
When --compress-debug-sections is given,
llvm-objcopy removes the uncompressed sections and adds compressed to the section list.
This makes all the pointers to old sections to be outdated.
Currently, code already has logic for replacing the target sections of the relocation
sections. But we also have to update the relocations by themselves.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40885.
Differential revision: https://reviews.llvm.org/D58960
llvm-svn: 355821
When --compress-debug-sections is given, llvm-objcopy do not compress
sections that have "ZLIB" header in data. Normally this signature is used
in zlib-gnu compression format. But if zlib-gnu used then the name of the compressed
section should start from .z* (e.g .zdebug_info). If it does not, then it is not
a zlib-gnu format and section should be treated as a normal uncompressed section.
Differential revision: https://reviews.llvm.org/D58908
llvm-svn: 355399
Summary:
This removes calls to `error()`/`reportError()` in the main driver (llvm-objcopy.cpp) as well as the associated argv-parsing (CopyConfig.cpp). `logAllUnhandledErrors()` is now the main way to print errors.
There are still a few uses from within the per-arch drivers, so we can't delete them yet... but almost!
Reviewers: jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, jakehehrlich, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58316
llvm-svn: 354600
Some triples in llvm-mc appear to be unavailable on some buildbots.
To please those buildbots we temporarily limit the test to darwin
(where the required triple is guranteed to be available)
until we find the right solution.
llvm-svn: 352950
This diff implements first bits for copying (without modification) MachO object files.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D54674
llvm-svn: 352944
Summary:
Include the symbol being defined in the list of requirements for using --localize-symbol.
This is used, for example, when someone is depending on two different projects that have the same (or close enough) method defined in each library, and using "-L sym" for a conflicting symbol in one of the libraries so that the definition from the other one is used. However, the library may have internal references to the symbol, which cause program crashes when those are used, i.e.:
```
$ cat foo.c
int foo() { return 5; }
$ cat bar.c
int foo();
int bar() { return 2 * foo(); }
$ cat foo2.c
int foo() { /* Safer implementation */ return 42; }
$ cat main.c
int bar();
int main() {
__builtin_printf("bar = %d\n", bar());
return 0;
}
$ ar rcs libfoo.a foo.o bar.o
$ ar rcs libfoo2.a foo2.o
# Picks the wrong foo() impl
$ clang main.o -lfoo -lfoo2 -L. -o main
# Picks the right foo() impl
$ objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
# Links somehow, but crashes at runtime
$ llvm-objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
```
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57417
llvm-svn: 352767
Summary:
This adds support for the --discard-locals flag, which acts similarly to --discard-all, except it only applies to compiler-generated symbols (i.e. symbols starting with `.L` in ELF).
I am not sure about COFF local symbols: those appear to also use `.L` in most cases, but also use just `L` in other cases, so for now I am just leaving it unimplemented there.
Fixes PR36160
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Reviewed By: jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57248
llvm-svn: 352626
Summary: Do some more error cleanup, removing some dependencies from llvm-objcopy's error/reportError in [ELF/COFF]Objcopy methods.
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57423
llvm-svn: 352625
Summary:
--set-section-flags is used to change the section flags (e.g. SHF_ALLOC) for given sections. The flags allowed are the same from the existing --rename-section=.old=.new[,flags] feature.
Additionally, make sure that --set-section-flag cannot be used with --rename-section (either the source or destination), since --rename-section accepts flags. This avoids ambiguity for something like "--rename-section=.foo=.bar,alloc --set-section-flag=.bar,code".
Reviewers: jhenderson, jakehehrlich, alexshap, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57198
llvm-svn: 352505
Summary: When using llvm-objcopy -O binary and the resulting file will be empty (e.g. removing the only section that would be written, or using --only-keep with a section that doesn't exist/isn't SHF_ALLOC), we crash because FileOutputBuffer expects Size > 0. Add a regression test, and change Buffer to open/truncate the output file in this case.
Reviewers: alexshap, jhenderson, jakehehrlich, espindola
Reviewed By: alexshap, jhenderson
Subscribers: jfb, llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56806
llvm-svn: 352371
This change adds an option -g to llvm-objcopy which is an alias for the existing option --strip-debug.
This fixes PR40003.
Reviewed by: alexshap
Differential Revision: https://reviews.llvm.org/D57217
llvm-svn: 352182
The aux symbols were stored in an opaque std::vector<uint8_t>,
with contents interpreted according to the rest of the symbol.
All aux symbol types but one fit in 18 bytes (sizeof(coff_symbol16)),
and if written to a bigobj, two extra padding bytes are written (as
sizeof(coff_symbol32) is 20). In the storage agnostic intermediate
representation, store the aux symbols as a series of coff_symbol16
sized opaque blobs. (In practice, all such aux symbols only consist
of one aux symbol, so this is more flexible than what reality needs.)
The special case is the file aux symbols, which are written in
potentially more than one aux symbol slot, without any padding,
as one single long string. This can't be stored in the same opaque
vector of fixed sized aux symbol entries. The file aux symbols will
occupy a different number of aux symbol slots depending on the type
of output object file. As nothing in the intermediate process needs
to have accurate raw symbol indices, updating that is moved into the
writer class.
Differential Revision: https://reviews.llvm.org/D57009
llvm-svn: 351947
These are no longer necessary as the testcase now seems to run fine
on the buildbots that previously failed on this case, after SVN r351934.
llvm-svn: 351946
This was reverted since it broke a couple buildbots. The reason
for the breakage is not yet known, but this time, the test has
got more diagnostics added, to hopefully allow figuring out
what goes wrong.
Differential Revision: https://reviews.llvm.org/D57007
llvm-svn: 351931
Summary:
This patch changes a few methods to return Error instead of manually calling error/reportError to abort. This will make it easier to extract into a library.
Note that error() takes just a string (this patch also adds an overload that takes an Error), while reportError() takes string + [error/code]. To help unify things, use FileError to associate a given filename with an error. Note that this takes some special care (for now), e.g. calling reportError(FileName, <something that could be FileError>) will duplicate the filename. The goal is to eventually remove reportError() and have every error associated with a file to be a FileError, and just one error handling block at the tool level.
This change was suggested in D56806. I took it a little further than suggested, but completely fixing llvm-objcopy will take a couple more patches. If this approach looks good, I'll commit this and apply similar patche(s) for the rest.
This change is NFC in terms of non-error related code, although the error message changes in one context.
Reviewers: alexshap, jhenderson, jakehehrlich, mstorsjo, espindola
Reviewed By: alexshap, jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56930
llvm-svn: 351896
This was requested in the review of D57006.
Also add missing quotes around symbol names in error messages.
Differential Revision: https://reviews.llvm.org/D57014
llvm-svn: 351799
The debug directory contains the rwa file address of itself,
which is updated on write. Add a testcase for this existing
functionality.
Differential Revision: https://reviews.llvm.org/D56876
llvm-svn: 351659
Summary:
Fix llvm-objcopy to add .note sections as SHT_NOTEs. GNU objcopy overrides section flags for special sections. For `.note` sections (with the exception of `.note.GNU-stack`), SHT_NOTE is used.
Many other sections are special cased by libbfd, but `.note` is the only special section I can seem to find being used with objcopy --add-section.
See `.note` in context of the full list of special sections here: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=bfd/elf.c;h=eb3e1828e9c651678b95a1dcbc3b124783d1d2be;hb=HEAD#l2675
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56570
llvm-svn: 351204
Summary:
As pointed out in D53667, our use of hyphens in flags can be inconsistent, mixing `-` with `--`. This change makes all long style flags use `--`.
Automatically changed via:
```
find test/tools/llvm-objcopy/ELF -type f | xargs sed -i 's/ -\([a-zA-Z]\{3\}\)/ --\1/g'
```
Two false positives were manually fixed/reverted.
Reviewers: jhenderson, espindola, alexshap
Reviewed By: jhenderson
Subscribers: emaste, javed.absar, arichardson, fedor.sergeev, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D56513
llvm-svn: 350944
Previously, this was broken - by setting PointerToSymbolTable to zero
but still actually writing the string table length, the object file
header was corrupted.
Differential Revision: https://reviews.llvm.org/D56584
llvm-svn: 350926
Summary:
The -O flag is currently being mostly ignored; it's only checked whether or not the output format is "binary". This adds support for a few formats (e.g. elf64-x86-64), so that when specified, the output can change between 32/64 bit and sizes/alignments are updated accordingly.
This fixes PR39135
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53667
llvm-svn: 350541
Summary:
Fix EntrySize, Size, and Align before doing layout calculation.
As a side cleanup, this removes a dependence on sizeof(Elf_Sym) within BinaryReader, so we can untemplatize that.
This unblocks a cleaner implementation of handling the -O<format> flag. See D53667 for a previous attempt. Actual implementation of the -O<format> flag will come in an upcoming commit, this is largely a NFC (although not _totally_ one, because alignment on binary input was actually wrong before).
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56211
llvm-svn: 350336
This is an initial implementation of no-op passthrough copying of COFF
with objcopy.
Differential Revision: https://reviews.llvm.org/D54939
llvm-svn: 349605
I just hard core goofed when I wrote this and created a different name
for no good reason. I'm failry aware of most "fresh" users of llvm-objcopy
(that is, users which are not using it as a drop in replacement for GNU
objcopy) and can say that only "-j" is being used by such people so this
patch should strictly increase compatibility and not remove it.
Differential Revision: https://reviews.llvm.org/D52180
llvm-svn: 348446
Split timestamp preservation tests into atime and mtime test, and skip
the former on NetBSD. When the filesystem is mounted noatime, NetBSD
not only inhibits implicit atime updates but also prevents setting atime
via utime(), causing the test to fail.
Differential Revision: https://reviews.llvm.org/D55271
llvm-svn: 348354
This flag does not exist in GNU objcopy but has a major use case.
Debugging tools support the .build-id directory structure to find
debug binaries. There is no easy way to build this structure up
however. One way to do it is by using llvm-readelf and some crazy
shell magic. This implements the feature directly. It is most often
the case that you'll want to strip a file and send the original to
the .build-id directory but if you just want to send a file to the
.build-id directory you can copy to /dev/null instead.
Differential Revision: https://reviews.llvm.org/D54384
llvm-svn: 348174
In this diff the elf-specific tests are moved into the subfolder llvm-objcopy/ELF
(the change was discussed in the comments on https://reviews.llvm.org/D54674).
A separate code reivew wasn't sent for this change
since Phabricator is failing to create such a large diff.
Test plan:
make check-all
make check-llvm-tools
make check-llvm-tools-llvm-objcopy
llvm-svn: 347958
This allows libtool to detect the presence of llvm-strip and use
it with the options --strip-debug and --strip-unneeded.
Also hook up the -V alias for objcopy.
Differential Revision: https://reviews.llvm.org/D54936
llvm-svn: 347731
Summary:
llvm-objcopy/strip support `--keep` (for sections) and `--keep-symbols` (for symbols). For consistency and clarity, rename `--keep` to `--keep-section`.
In fact, for GNU compatability, -K is --keep-symbol, so it's weird that the alias `-K` is not the same as the short-ish `--keep`.
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, MaskRay
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D54477
llvm-svn: 346782
Summary: ar and objcopy/strip all support configuring whether archives are written deterministically (timestamps/UIDs/GIDs/etc zero'd). This has been ported to llvm-ar (the U/D modifiers) but not yet to llvm-objcopy/strip.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Subscribers: ruiu, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53913
llvm-svn: 345859
Summary:
--localize-symbol and --localize-hidden will currently localize common symbols. GNU objcopy will not localize these symbols even when explicitly requested, which seems reasonable; common symbols should always be global so they can be merged during linking.
See PR39461
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, jhenderson, alexshap, MaskRay
Subscribers: emaste, arichardson, alexshap, MaskRay, llvm-commits
Differential Revision: https://reviews.llvm.org/D53782
llvm-svn: 345856
Summary: --keep-global-symbol and --globalize-symbol don't make sense for undefined symbols, so it should be ignored for those symbols. This matches GNU objcopy behavior.
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53733
llvm-svn: 345614
Summary:
GNU strip supports both `-s` and `-S` as aliases for `--strip-all` and `--strip-debug`, respectfully.
As part of this, it turns out that strip/objcopy were accepting case insensitive command line args. I'm not sure if there was an explicit reason for this. The only others uses of this are llvm-cvtres/llvm-mt/llvm-lib, which are all tools specific for windows support. Forcing case sensitivity allows both aliases to exist, but seems like a good idea anyway.
And as a surprise test case adjustment, the llvm-strip unit test was running with `-keep=unavailable_symbol`, despite `keep` not be a valid flag for strip. This is because there is a flag `-K` which, when case insensitivity is permitted, allows it to be interpreted as `-K` = `eep=unavailable_symbol` (e.g. to allow `-Kfoo` == `--keep-symbol=foo`).
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53163
llvm-svn: 345068
Summary:
This change adds support for the GNU --target flag, which sets both --input-target and --output-target.
GNU objcopy doesn't do any checking for whether both --target and --{input,output}-target are used, and so it allows both, e.g. "--target A --output-target B" is equivalent to "--input-target A --output-target B" since the later command line flag would override earlier ones. This may be error prone, so I chose to implement it as an error if both are used. I'm not sure if anyone is actually using both.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53029
llvm-svn: 344321
Summary: I had added support for compressing dwarf sections in a prior commit,
this one adds support for decompressing. Usage is:
llvm-objcopy --decompress-debug-sections input.o output.o
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D51841
llvm-svn: 343451
Summary:
Implement --version for objcopy and strip.
I think there are LLVM utilities that automatically handle this, but that doesn't seem to work with custom parsing since this binary handles both objcopy and strip, so it uses custom parsing.
This fixes PR38298
Reviewers: jhenderson, alexshap, jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52328
llvm-svn: 342702
This diff adds -S as an alias for --strip-all-gnu
(for compatibility with binutils' objcopy).
Patch by Dmitry Golovin!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D52163
llvm-svn: 342364
Submitted on behalf of Armando Montanez (amontanez@google.com).
Objects with unused program headers copied by objcopy would always have
nonzero values for program header offset and program header entry size.
While technically valid, this atypical behavior triggers warnings in some
tools. This change sets the two fields to zero when the program header is
unused, better fitting the general expectations for unused program header
data.
Section headers behaved somewhat similarly (though only with the entry size),
and are fixed in this revision as well.
Differential Revision: https://reviews.llvm.org/D51961
llvm-svn: 342065
Third Attempt:
- Alignment issues resolved.
- zlib::isAvailable() detected.
- ArrayRef misuse fixed.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341635
Second Attempt. Alignment issues resolved. zlib::isAvailable() detected.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341607
Summary:
Allow strip to be called on multiple input files, which is interpreted as stripping N files in place. Using multiple input files is incompatible with -o.
To allow this, create a `DriverConfig` struct which just wraps a list of `CopyConfigs`. objcopy will only ever have a single `CopyConfig`, but strip will have N (where N >= 1) CopyConfigs.
Reviewers: alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: MaskRay, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D51660
llvm-svn: 341464
Summary:
Fixes the error "Link field value 0 in section .rela.plt is invalid" when copying/stripping certain binaries. Minimal repro:
```
$ cat /tmp/a.c
int main() { return 0; }
$ clang -static /tmp/a.c -o /tmp/a
$ llvm-strip /tmp/a -o /tmp/b
llvm-strip: error: Link field value 0 in section .rela.plt is invalid.
```
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51493
llvm-svn: 341419
Also reverts follow-up commits r341343 and r341344.
The primary commit continues to break some build bots even after the
fixes in r341343 for UBSan issues:
http://lab.llvm.org:8011/builders/clang-cmake-aarch64-full/builds/5823
It is also failing for me locally (linux, x86-64).
llvm-svn: 341360
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341342
The restoreDateOnFile() method used to preserve dates uses sys::fs::openFileForWrite(). That method defaults to opening files with CD_CreateAlways, which truncates the output file if it exists. Use CD_OpenExisting instead to open it and *not* truncate it, which also has the side benefit of erroring if the file does not exist (it should always exist, because we just wrote it out).
Also, fix the test case to make sure the output is a valid output file, and not empty. The extra test assertions are enough to catch this regression.
llvm-svn: 340996
Summary:
Port GNU Objcopy -G/--keep-global-symbol(s).
This is slightly different than the already-implemented --globalize-symbol, which marks a symbol as global when copying. When --keep-global-symbol (alias -G) is used, *only* those symbols marked will stay global, and all other globals are demoted to local. (Also note that it doesn't *promote* a symbol to global). Additionally, there is a pluralized version of the flag --keep-global-symbols, which effectively applies --keep-global-symbol for every non-comment in a file.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50589
llvm-svn: 340105
Summary:
The -I (--input-target) and -B (--binary-architecture) flags exist but are currently silently ignored. This adds support for -I binary for architectures i386, x86-64 (and alias i386:x86-64), arm, aarch64, sparc, and ppc (powerpc:common64). This is largely based on D41687.
This is done by implementing an additional subclass of Reader, BinaryReader, which works by interpreting the input file as contents for .data field, sets up a synthetic header, and adds additional sections/symbols (e.g. _binary__tmp_data_txt_start).
Reviewers: jakehehrlich, alexshap, jhenderson, javed.absar
Reviewed By: jhenderson
Subscribers: jyknight, nemanjai, kbarton, fedor.sergeev, jrtc27, kristof.beyls, paulsemel, llvm-commits
Differential Revision: https://reviews.llvm.org/D50343
llvm-svn: 340070
Summary:
The issue with the python path is that the path to python on Windows can contain spaces. To make the tests always work, the path to python needs to be surrounded by quotes.
This change updates several configuration files which specify the path to python as a substitution and also remove quotes from existing tests.
Reviewers: asmith, zturner, alexshap, jakehehrlich
Reviewed By: zturner, alexshap, jakehehrlich
Subscribers: mehdi_amini, nemanjai, eraman, kbarton, jakehehrlich, steven_wu, dexonsmith, stella.stamenova, delcypher, llvm-commits
Differential Revision: https://reviews.llvm.org/D50206
llvm-svn: 339073
Summary:
Add support for --rename-section flags from gnu objcopy.
Not all flags appear to have an effect for ELF objects, but allowing them would allow easier drop-in replacement. Other unrecognized flags are rejected.
This was only tested by comparing flags printed by "readelf -e <.o>" against the output of gnu vs llvm objcopy, it hasn't been tested to be valid beyond that.
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits, paulsemel, alexshap
Differential Revision: https://reviews.llvm.org/D49870
llvm-svn: 338582
Summary:
See binutils-gdb/bfd/elf.c, GNU objcopy also strips .stab* (STABS)
.line* (DWARF 1) .gnu.linkonce.wi.* (linkonce section for .debug_info) but
I'm not sure we need to be compatible with it.
Reviewers: dblaikie, alexshap, jakehehrlich, jhenderson
Reviewed By: alexshap, jakehehrlich
Subscribers: aprantl, JDevlieghere, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D50100
llvm-svn: 338443
Summary:
These two cases will trigger a dereference on a nullptr, since the
SymbolTable can be nonexistent for a given library, in addition to just
being empty.
Reviewers: alexshap
Reviewed By: alexshap
Subscribers: meikeb, kongyi, chh, jakehehrlich, llvm-commits, pirama
Differential Revision: https://reviews.llvm.org/D49534
llvm-svn: 338062
Summary:
Add basic support for --rename-section=old=new to llvm-objcopy.
A full replacement for GNU objcopy requires also modifying flags (i.e. --rename-section=old=new,flag1,flag2); I'd like to keep that in a separate change to keep this simple.
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49576
llvm-svn: 337604
Summary: In Python 3, sys.stdout.write expects a string rather than bytes. In order to be able to write the bytes to stdout, we need to use the buffer directly instead. This change is borrowing the implementation for writing to stdout that cat.py uses. Note that we cannot use cat.py directly because the file we are trying to open is a gzip file.
Reviewers: asmith, bkramer, alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D49515
llvm-svn: 337567
This patch is an update of an older patch that never landed
(see here: https://reviews.llvm.org/D42516)
Recently various users have run into this issue and it just 100%
has to be solved at this point. The main difference in this patch
is that I use gunzip instead of unzip which should hopefully allow
tests to pass. Please review this as if it is a new patch however.
I found some issues along the way and made some minor modifications.
The binary used in this patch for testing (a zip file to make it small)
can be found here:
https://drive.google.com/file/d/1UjsnTO9edLttZibbr-2T1bJl92KEQFAO/view?usp=sharing
Differential Revision: https://reviews.llvm.org/D49206
llvm-svn: 337204
Summary:
This option appears to have been dropped as part of the refactoring in
r331663. Unfortunately, if we want to use llvm-strip as a drop-in
replacement for strip, this option should still be available.
Reviewers: alexshap
Reviewed By: alexshap
Subscribers: meikeb, kongyi, chh, jakehehrlich, llvm-commits, pirama
Differential Revision: https://reviews.llvm.org/D49226
llvm-svn: 336921
This diff adds support for handling static libraries
to llvm-objcopy and llvm-strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D48413
llvm-svn: 336455
This fixes the bug where strip-all option was
leading to a malformed outputted ELF file.
Differential Revision: https://reviews.llvm.org/D47414
llvm-svn: 333772
This diff implements the option -o
for specifying a file to write the output to.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D47505
llvm-svn: 333693
Per discussion on the generic-abi mailing list:
https://groups.google.com/forum/#!topic/generic-abi/MPr8TVtnVn4
An object file manipulation tool must either write out a symbol
table with the same number of entries as the original symbol table
and in the same order, or if this is impossible, refuse to operate
on the object file if it has unrecognized sections that are linked
to the symtab section. However, existing tools (namely GNU strip,
GNU objcopy and ld.{bfd,gold,lld} -r) do not comply with this at
present: they change symbol table indexes and set sh_link to 0 on
the unrecognized symtab-linked sections.
We intend to use the latter as a (temporary) signal that a tool has
operated on a proposed new symtab-linked section and invalidated the
symbol table indexes. However, llvm-objcopy currently keeps sh_link
pointing to the new symtab section. This patch changes llvm-objcopy
to set sh_link to 0 to match the behaviour of the other tools.
Differential Revision: https://reviews.llvm.org/D47404
llvm-svn: 333581
This is a small follow-up to the revisions r333117 and r331663.
1. Avoid the name conflicts of the generated variables for prefixes.
2. Apply clang-format -i -style=llvm to llvm-objcopy.cpp once again.
3. Add a test for the flag with double dash.
Test plan: make check-all
llvm-svn: 333120
If one runs llvm-objcopy --strip-all --keep-symbol foo
and the symbol table indeed contains the symbol "foo"
then it should not be removed.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D47052
llvm-svn: 333008
This option just keeps being a problem and really needs to be implemented
in some fashion. Implementing it properly requires some kind of
"replaceSectionReference" method because all the existing links need to be
maintained. The desired behavior is just for allocated sections to become
NOBITS but actually implementing that is rather tricky due to the current
design of llvm-objcopy. However converting allocated sections to NOBITS is
just an optimization and not something debuggers need. Debuggers can debug
a stripped executable and take an unstripped executable for that stripped
executable as input. Additionally allocated sections account for a very
small part of debug binaries so this optimization is quite small. I propose
that for the time being we implement this as a NOP so that people can use
llvm-objcopy where they need to, just in a sub-optimal way.
This option has already blocked a lot of people and its currently blocking me.
llvm-svn: 332396
This option permits to explicitly keep the specified
symbol so that it doesn't get removed.
Differential Revision: https://reviews.llvm.org/D46819
llvm-svn: 332356
This diff adds support for -remove-section to llvm-strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46567
llvm-svn: 332081
Verify that the input binary is not getting modified
and add an invocation which uses -remove-section instead of -R.
Test plan: make check-all
llvm-svn: 332078
This diff slightly reorganizes the tests and improves
the test coverage of help messages / error reports.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46589
llvm-svn: 331993
Set the exit code to 1 if no arguments are specified.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46547
llvm-svn: 331776
llvm-strip is supposed to be a drop-in replacement for binutils strip.
To start the ball rolling this diff adds the initial bits for llvm-strip,
more features will be added incrementally over time.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46407
llvm-svn: 331663
This diff implements --redefine-sym option
for changing the name of a symbol.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46029
llvm-svn: 330973
Add explicit dependency on ObjcopyTableGen
and rerun the tests on Windows.
I will double-check the build bots
and revert this commit if necessary.
llvm-svn: 330685
This diff fixes sh_link for various types of sections
(i.e. for SHT_ARM_EXIDX, SHT_HASH). In particular, this change enables us
to use llvm-objcopy with clang -gsplit-dwarf for the target android-arm.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D45851
llvm-svn: 330478
Swithces from using the command line library to using TableGen. This will allow
llvm-strip to exist and allow refinements of the command line syntax.
Differential Revision: https://reviews.llvm.org/D44236
llvm-svn: 329863
This diff adds support for SHT_GROUP sections to llvm-objcopy.
Some sections are interrelated and comprise a group.
For example, a definition of an inline function might require,
in addition to the section containing its instructions,
a read-only data section containing literals referenced inside the function.
A section of the type SHT_GROUP contains the indices of the group members,
therefore, it needs to be updated whenever the indices change.
Similarly, the fields sh_link, sh_info should be recalculated as well.
[Resubmit r328012 with the proper handling of endianness]
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D43996
llvm-svn: 328143
This diff adds support for SHT_GROUP sections to llvm-objcopy.
Some sections are interrelated and comprise a group.
For example, a definition of an inline function might require,
in addition to the section containing its instructions,
a read-only data section containing literals referenced inside the function.
A section of the type SHT_GROUP contains the indices of the group members,
therefore, it needs to be updated whenever the indices change.
Similarly, the fields sh_link, sh_info should be recalculated as well.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D43996
llvm-svn: 328012
Because of -ffunction-sections (and maybe other use cases I'm not aware of?) it
can occur that we need more than 0xfeff sections but ELF dosn't support that
many sections. To solve this problem SHN_XINDEX exists and with it come a whole
host of changes for section indexes everywhere. This change adds support for
those cases which should allow llvm-objcopy to copy binaries that have an
arbitrary number of sections.
Differential Revision: https://reviews.llvm.org/D42516
llvm-svn: 326940
Summary:
The current implementation was writing the file name without the extension
whereas GNU objcopy writes the full filename. With this change GDB will now
load the .debug file instead of silently ignoring it.
Reviewers: jakehehrlich, jhenderson
Reviewed By: jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43474
llvm-svn: 325528
Some ELF files produced by lld may have zero-size segment placeholders as shown
below. Since GNU_STACK Offset is 0, the current code makes it the lowest used
offset, and relocates all the segments over the ELF header. The resulting
binary is total garbage.
This change fixes how llvm-objcopy handles PT_PHDR properlly by treating ELF
headers and the program header table as segments to allow the layout algorithm
decide where those should go.
Author: vit9696
Differential Revision: https://reviews.llvm.org/D42872
llvm-svn: 325189
If the output file is not specified make the modifications in-place
(like binutils objcopy does). In particular, this fixes
the behavior of Clang -gsplit-dwarf (if Clang is configured to use llvm-objcopy),
previously it was creating .dwo files, but still leaving *dwo* sections in
the original binary.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D42873
llvm-svn: 324783
While writing code for input and output formats in llvm-objcopy it became
apparent that there was a code health problem. This change attempts to solve
that problem by refactoring the code to use Reader and Writer objects that can
read in different objects in different formats, convert them to a single shared
internal representation, and then write them to any other representation.
New classes:
Reader: the base class used to construct instances of the internal
representation
Writer: the base class used to write out instances of the internal
representation
ELFBuilder: a helper class for ELFWriter that takes an ELFFile and converts it
to a Object
SectionVisitor: it became necessary to remove writeSection from SectionBase
because, under the new Reader/Writer scheme, it's possible to convert between
ELF Types such as ELF32LE and ELF32BE. This isn't possible with writeSection
because it (dynamically) depends on the underlying section type *and*
(statically) depends on the ELF type. Bad things would happen if the underlying
sections for ELF32LE were used for writing to ELF64BE. To avoid this code smell
(which would have compiled, run, and output some nonsesnse) I decoupled writing
of sections from a class.
SectionWriter: This is just the ELFT templated implementation of
SectionVisitor. Many classes now have this class as a friend so that the
writing methods in this class can write out private data.
ELFWriter: This is the Writer that outputs to ELF
BinaryWriter: This is the Writer that outputs to Binary
ElfType: Because the ELF Type is not a part of the Object anymore we need a way
to construct the correct default Writer based on properties of the Reader. This
enum just keeps track of the ELF type of the input so it can be used as the
default output type as well.
Object has correspondingly undergone some serious changes as well. It now has
more generic methods for building and manipulating ELF binaries. This interface
makes ELFBuilder easy enough to use and will make the BinaryReader/Builder easy
to create as well. Most changes in this diff are cosmetic and deal with the
fact that a method has been moved from one class to another or a change from a
pointer to a reference. Almost no changes should result in a functional
difference (this is after all a refactor). One minor functional change was made
and the result can be seen in remove-shstrtab-error.test. The fact that it
fails hasn't changed but the error message has changed because that failure is
detected at a later point in the code now (because WriteSectionHeaders is a
property of the ElfWriter *not* a property of the Object). I'd say roughly
80-90% of this code is cosmetically different, 10-19% is different but
functionally the same, and 1-5% is functionally different despite not causing a
change in tests.
Differential Revision: https://reviews.llvm.org/D42222
llvm-svn: 323480
For sections with different virtual and physical addresses, alignment and
placement in the output binary should be based on the physical address.
Ran into this problem with a bare metal ARM project where llvm-objcopy added a
lot of zero-padding before the .data section that had differing addresses. GNU
objcopy did not add the padding, and after this fix, neither does llvm-objcopy.
Update a test case so a section has different physical and virtual addresses.
Fixes B35708
Authored By: Owen Shaw (owenpshaw)
Differential Revision: https://reviews.llvm.org/D41619
llvm-svn: 323144
This change adds support in llvm-objcopy for GNU objcopy's --localize-hidden
option. This option changes every hidden or internal symbol into a local symbol.
llvm-svn: 321884
I have no clue how this was missed when symbol table support was added. This
change ensures that the visibility of symbols is preserved by default.
llvm-svn: 321681
This change adds support for adding progbits sections with contents from a file
Differential Revision: https://reviews.llvm.org/D41212
llvm-svn: 321047
Without this when lld failed to replace the output file it would leave
the temporary behind. The problem is that the existing logic is
- cancel the delete flag
- rename
We have to cancel first to avoid renaming and then crashing and
deleting the old version. What is missing then is deleting the
temporary file if the rename fails.
This can be an issue on both unix and windows, but I am not sure how
to cause the rename to fail reliably on unix. I think it can be done
on ZFS since it has an ACL system similar to what windows uses, but
adding support for checking that in llvm-lit is probably not worth it.
llvm-svn: 319786
This change adds support for the --only-keep option and the -j alias as well.
A common use case for these being used together is to dump a specific section's
data. Additionally the --keep option is added (GNU objcopy doesn't have this)
to avoid removing a bunch of things. This allows people to err on the side of
stripping aggressively and then to keep the specific bits that they need for
their application.
Differential Revision: https://reviews.llvm.org/D39021
llvm-svn: 319467
GNU's --strip-all doesn't strip as aggressively as it could in general.
Currently llvm-objcopy copies the exact behavoir of GNU's --strip-all.
eu-strip is used as a drop in replacement for GNU strip/objcopy in many many
places without issue. eu-strip removes non-allocated sections and keeps
.gnu.warning* sections. Because --strip-all will likely be the most widely
used stripping option we should make --strip-all as aggressive as it can safely
be. Since we have evidence from eu-strip that this is a safe option we should
allow it. For those that might still have an issue afterwards I've added
--strip-all-gnu as an exact drop in replacement for GNU's --strip-all as well.
llvm-svn: 319071
The original -O binary implementation just copied segment data from the
object and dumped it into a file. This doesn't take into account any
operations performed on objects such as section removal. GNU objcopy has
some specific behavior that we'd also like to respect. For instance
using -O binary and -j <some_section> will dump <some_section> to a
file. This change implements GNU objcopy style -O binary to as close of
an approximation as I can determine.
Differential Revision: https://reviews.llvm.org/D39713
llvm-svn: 318324
This change adds a new flag not present in GNU objcopy that we call
--strip-non-alloc.
Differential Revision: https://reviews.llvm.org/D39926
llvm-svn: 318168
We haven't been supporting anything but ELF64LE since the start. Luckily
this was always accounted for and the change is pretty trivial. B35281
requests this change for ELF32LE. This change adds support for ELF32LE,
ELF64BE, and ELF32BE with all supported features that already existed
for ELF64LE.
Differential Revision: https://reviews.llvm.org/D39977
llvm-svn: 318166
Many projects use this option. There are two ways to use it. You can
either a) Just use --strip-debug and keep the old file with debug
content or b) you can use --strip-debug, --only-keep-debug, and
--add-gnu-debuglink all in conjunction to create two separate files, the
stripped file and the debug file. --only-keep-debug is more complicated
than --strip-debug because it keeps the section headers without keeping
section contents. That's not really supported by llvm-objcopy at the
moment but I plan on adding it. So this change just supports a) and
options to support b) will come soon.
Differential Revision: https://reviews.llvm.org/D39919
llvm-svn: 318094
This change adds a slightly less extreme form of stripping. It should
remove any section that starts with ".debug" and should remove any
symbol table or relocations. In general this strips out most of the
stuff you don't need to execute but leaves a number of things around.
This behavior has been designed to be compatible with GNU strip/objcopy
--strip-all so that anywhere you currently use --strip-all you should be
able to use llvm-objcopy as a drop in replacement.
Differential Revision: https://reviews.llvm.org/D39769
llvm-svn: 318092
Just aligning segment offsets to segment alignment is incorrect and also
wastes more space than is needed. The requirement is that p_offset ==
p_addr modulo p_align *not* that p_offset == 0 modulo p_align. Generally
speaking we've been using p_addr == 0 modulo p_align. In fact yaml2obj
can't even produce a valid situation which causes llvm-objcopy to
produce incorrect results because alignment and offset were both
inherited from the sections the program header covers. This change fixes
this bad behavior in llvm-objcopy.
Differential Revision: https://reviews.llvm.org/D39132
llvm-svn: 317284
ubsan caught an issue I made where I was converting a null pointer to a
reference.
elf utils implements a particularly extreme form of stripping that I'd
like to support. eu-strip has an option called "strip-sections" that
removes all section headers and leaves only program headers and the
segment data. I have implemented this option partly as a test but mainly
because in Fuchsia we would like to use this option to minimize the size
of our executables. The other strip options that are on my list include
--strip-all and --strip-debug. This is a preliminary implementation that
I'd like to start using in Fuchsia builds if possible. This change
implements such a stripping option for llvm-objcopy
Differential Revision: https://reviews.llvm.org/D38335
llvm-svn: 315484
elf utils implements a particularly extreme form of stripping that I'd
like to support. eu-strip has an option called "strip-sections" that
removes all section headers and leaves only program headers and the
segment data. I have implemented this option partly as a test but mainly
because in Fuchsia we would like to use this option to minimize the size
of our executables. The other strip options that are on my list include
--strip-all and --strip-debug. This is a preliminary implementation that
I'd like to start using in Fuchsia builds if possible. This change
implements such a stripping option for llvm-objcopy
Differential Revision: https://reviews.llvm.org/D38335
llvm-svn: 315412
This change adds the ability to use the "-R"/"-remove-section" option
multiple times.
Differential Revision: https://reviews.llvm.org/D38332
llvm-svn: 315385
This change adds support for removing sections using the -R field (as
GNU objcopy does as well). This change should let us add many helpful
tests and is a proper stepping stone for adding more general kinds of
stripping.
Differential Revision: https://reviews.llvm.org/D38260
llvm-svn: 315346
Somehow a few massive errors slipped though the cracks of testing.
1. The code in Segment::finalize was left over from the old layout
algorithm. In certain situations this would cause very strange issues
with segment layout. For instance in the shift-segments.test case it
would cause the second segment to have the same offset as the first.
2. In debugging this I discovered another issue. Namely section alignment
was not being computed based on Section->Align but instead
Section->Offset which is bizarre and makes no sense. I have no clue how
it worked in the first place. This issue is also fixed
3. Fixing #2 exposed a bug where things were not being written past the end
of the file that technically should have been. This was because in
certain cases (like overlapping-segments) the end of the file wouldn't
always be bumped if the offset could be chosen relative to an existing
segment that already had it's offset chosen. For fully nested segments
this is fine but for overlapping segments this leaves the end of the
file short. So I changed how the offset is bumped when looping though
segments.
Differential Revision: https://reviews.llvm.org/D38436
llvm-svn: 314918
I did not upload two binaries that I reference in tests.
This change adds support for sections involved in dynamic loading such
as SHT_DYNAMIC, SHT_DYNSYM, and allocated string tables.
The two added binaries used for tests can be downloaded here and here
Differential Revision: https://reviews.llvm.org/D36560
llvm-svn: 313772
I overzealously landed this before I was sure that another change
wouldn't break the build that this change depends on.
This change adds support for sections involved in dynamic loading such
as SHT_DYNAMIC, SHT_DYNSYM, and allocated string tables.
The two added binaries used for tests can be downloaded here and here
Differential Revision: https://reviews.llvm.org/D36560
llvm-svn: 313767
I didn't initialize a pointer to be nullptr that I needed to.
This change adds support for nested and even overlapping segments. This means
that PT_PHDR, PT_GNU_RELRO, PT_TLS, and PT_DYNAMIC can be supported properly.
Differential Revision: https://reviews.llvm.org/D36558
llvm-svn: 313682
This change adds a test that checks the an error is produced when a hexagon
specific reserved section index is used but e_machine is not EM_HEXAGON.
Differential Revision: https://reviews.llvm.org/D38017
llvm-svn: 313661
This change adds support for nested and even overlapping segments. This means
that PT_PHDR, PT_GNU_RELRO, PT_TLS, and PT_DYNAMIC can be supported properly.
Differential Revision: https://reviews.llvm.org/D36558
llvm-svn: 313656
As discussed on llvm-commits it was decided it would be best to check
e_machine before declaring that a reserved section index is valid. The
only special e_machine value that matters here is EM_HEXAGON. This
change adds a special check for EM_HEXAGON.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D37767
llvm-svn: 313114
As is indexes above SHN_LORESERVE will not be handled correctly because
they'll be treated as indexes of sections rather than special values
that should just be copied. This change adds support to copy them
though.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D37393
llvm-svn: 312756
This change adds support for SHT_REL and SHT_RELA sections in
llvm-objcopy.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D36554
llvm-svn: 312680
This change adds support for SHT_REL and SHT_RELA sections in
llvm-objcopy.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D36554
llvm-svn: 312643
Sometimes LLD will produce a PT_LOAD segment that only covers the
headers (and covers no sections). GNU objcopy does not output the
segment contents for these sections. In particular this is an issue in
building magenta because the final link step for the kernel would
produce just such a PT_LOAD segment. This change is to support this case
and to match what GNU objcopy does in this case.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D36196
llvm-svn: 310149
This change adds the "-O binary" flag which directs llvm-objcopy to
output the object file to the same format as GNU objcopy does when given
the flag "-O binary". This was done by splitting the Object class into
two subclasses ObjectELF and ObjectBianry which each output a different
format but relay on the same code to read in the Object in Object.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D34480
llvm-svn: 310127
This change adds the "-O binary" flag which directs llvm-objcopy to
output the object file to the same format as GNU objcopy does when given
the flag "-O binary". This was done by splitting the Object class into
two subclasses ObjectELF and ObjectBianry which each output a different
format but relay on the same code to read in the Object in Object.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D34480
llvm-svn: 310018
This change adds the "-O binary" flag which directs llvm-objcopy to
output the object file to the same format as GNU objcopy does when given
the flag "-O binary". This was done by splitting the Object class into
two subclasses ObjectELF and ObjectBianry which each output a different
format but relay on the same code to read in the Object in Object.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D34480
llvm-svn: 309768
This change adds the "-O binary" flag which directs llvm-objcopy to
output the object file to the same format as GNU objcopy does when given
the flag "-O binary". This was done by splitting the Object class into
two subclasses ObjectELF and ObjectBianry which each output a different
format but relay on the same code to read in the Object in Object.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D34480
llvm-svn: 309658
As discussed on llvm-dev I've implemented the first basic steps towards
llvm-objcopy/llvm-objtool (name pending).
This change adds the ability to copy (without modification) 64-bit
little endian ELF executables that have SHT_PROGBITS, SHT_NOBITS,
SHT_NULL and SHT_STRTAB sections.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D33964
llvm-svn: 309643
As discussed on llvm-dev I've implemented the first basic steps towards
llvm-objcopy/llvm-objtool (name pending).
This change adds the ability to copy (without modification) 64-bit
little endian ELF executables that have SHT_PROGBITS, SHT_NOBITS,
SHT_NULL and SHT_STRTAB sections.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D33964
llvm-svn: 309249
As discussed on llvm-dev I've implemented the first basic steps towards
llvm-objcopy/llvm-objtool (name pending).
This change adds the ability to copy (without modification) 64-bit
little endian ELF executables that have SHT_PROGBITS, SHT_NOBITS,
SHT_NULL and SHT_STRTAB sections.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D33964
llvm-svn: 309032
As discussed on llvm-dev I've implemented the first basic steps towards
llvm-objcopy/llvm-objtool (name pending).
This change adds the ability to copy (without modification) 64-bit
little endian ELF executables that have SHT_PROGBITS, SHT_NOBITS,
SHT_NULL and SHT_STRTAB sections.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D33964
llvm-svn: 308821
As discussed on llvm-dev I've implemented the first basic steps towards
llvm-objcopy/llvm-objtool (name pending).
This change adds the ability to copy (without modification) 64-bit
little endian ELF executables that have SHT_PROGBITS, SHT_NOBITS,
SHT_NULL and SHT_STRTAB sections.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D33964
llvm-svn: 308803
As discussed on llvm-dev I've implemented the first basic steps towards
llvm-objcopy/llvm-objtool (name pending).
This change adds the ability to copy (without modification) 64-bit
little endian ELF executables that have SHT_PROGBITS, SHT_NOBITS,
SHT_NULL and SHT_STRTAB sections.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D33964
llvm-svn: 308559
George Rimar