The current implementation stops dumping in case of a single error
it handles, though we can continue dumping.
This patch refines it: it adds a few warnings and a few test cases.
Differential revision: https://reviews.llvm.org/D73269
The intention of Object/readobj-shared-object.test was to check the
general output for shared object.
I've added a case for testing dynamic objects to ELF/symbols.test.
Also we already test dynamic symbols printing in ELF/dyn-symbols.test +
I've added a case for `--dyn-syms` alias in D73164.
Hence we can remove this piece from Object/readobj-shared-object.test.
Differential revision: https://reviews.llvm.org/D73175
We have no good test for --needed-libs option.
The one we have as a part of Object/readobj-shared-object.test
is not complete.
In this patch I've did a minor NFC changes to the implementation and
added a test. This allowed to remove this piece from
Object/readobj-shared-object.test
Differential revision: https://reviews.llvm.org/D73174
It removes the Object/readobj-absent.test test and creates a one more case in
dyn-symbols.test we have.
Differential revision: https://reviews.llvm.org/D73169
We had no test for --hash-table in tools/llvm-readobj.
The one we had was in test/Object and checked that
it is possible to dump the hash table even when an object
doesn't have a section header table.
In this patch I created a test, moved and merged the existent one.
During moving I converted it to be YAML based to stop using the
precompiled binary.
Differential revision: https://reviews.llvm.org/D73105
We have a test/Object/no-section-header-string-table.test which checks
what happens when an object does not have a section header string table.
It does not check the full output though.
Currently our output is different from GNU readelf, because the latter prints
"<no-strings>" instead of a section name, while we print nothing.
This patch fixes this, adds a proper test case and removes the one from test/Object,
as it is not a right folder for llvm-readelf tests.
Differential revision: https://reviews.llvm.org/D73193
We have a `-dyn-symbols` option. It has a `--dyn-syms` alias
that is not tested in llvm-readobj tests currently.
There was a Object/readobj-elf-versioning.test where it is used,
but I've removed it in D73163. And also it is not the
right place to test it anyways.
Differential revision: https://reviews.llvm.org/D73164
To improve consistency and avoid unneeded shell feature (output
redirection).
While here, make other changes to improve consistency
--docnum 1 => --docnum=1
-docnum=x => --docnum=x
rpath.test checks that DT_RPATH is dumped.
We have dynamic-tags.test that tests all dynamic
tags and it is better, because also checks llvm-readelf
and does not use precompiled binaries.
Differential revision: https://reviews.llvm.org/D73093
This change is similar to one made for llvm-objdump in D72838.
llvm-readelf/llvm-readobj tools do not align the "Name/Value" column properly.
This patch adds a logic to calculate the size of indentation on fly
to fix such issues.
Differential revision: https://reviews.llvm.org/D72843
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
After recent changes (D71872) in yaml2obj, it is possible so cleanup
testing of the SHT_RELR sections.
Differential revision: https://reviews.llvm.org/D71874
This adds a few more tests for dynamic section.
We only had tests for simple unknown values for 64-bits target,
in this patch I've added OS specific and processor specific tags.
Also it tests both 32 and 64-bits targets now.
It will help to fix the formatting issues we have and diagnose a possible new ones.
Differential revision: https://reviews.llvm.org/D71896
This adds --strict-whitespace --match-full-lines flags to
improve the testing and reveal formatting issues we have.
Differential revision: https://reviews.llvm.org/D71895
This cleans up and merges `gnu-symbols.test` to `symbols.test`.
Initially `gnu-symbols.test` tested the following things:
1) How symbols are printed in GNU style.
It does not make sense to have a separate file for such tests.
2) It tried to test proc-specific symbol indexes. The test was incomplete and
also we already have `symbol-shndx.test` for that, so this part was removed.
3) It tested `--dyn-symbols` and `--symbols` correlation. All following
cases were moved to `symbols.test`:
a) That `--dyn-symbols` does not trigger showing regular symbols..
b) That `--symbols` triggers `--dyn-symbols` implicitly.
c) That `--dyn-symbols` and `--symbols` works fine together.
Differential revision: https://reviews.llvm.org/D71697
This removes the `getTypeString` from readeobj source because it
almost duplicates the existent method: `ELFFile<ELFT>::getDynamicTagAsString`.
Side effect: now it prints "<unknown:>0xHEXVALUE" instead of "(unknown)" for unknown values.
llvm-readelf before this patch printed:
```
0x0000000012345678 (unknown) 0x8765432187654321
0x000000006abcdef0 (unknown) 0x9988776655443322
0x0000000076543210 (unknown) 0x5555666677778888
```
and now it prints:
```
0x0000000012345678 (<unknown:>0x12345678) 0x8765432187654321
0x000000006abcdef0 (<unknown:>0x6abcdef0) 0x9988776655443322
0x0000000076543210 (<unknown:>0x76543210) 0x5555666677778888
```
GNU reaedlf prints different thing:
```
0x0000000012345678 (<unknown>: 12345678) 0x8765432187654321
0x000000006abcdef0 (Operating System specific: 6abcdef0) 0x9988776655443322
0x0000000076543210 (Processor Specific: 76543210) 0x5555666677778888
```
I am not sure we want to follow GNU here. Even if we do, it should be separate
patch probably. The new output looks better and closer to GNU anyways,
and the code is a bit simpler.
Differential revision: https://reviews.llvm.org/D71835
This rewrites a few tests to stop using the
trivial.obj.elf-x86-64 precompiled object
and removes it.
Differential revision: https://reviews.llvm.org/D71662
This removes the precompiled binary used, simplifies
the first test case, adds comments and llvm-readelf tool
invocations.
It also adds a test case for checking versioning symbols.
Differential revision: https://reviews.llvm.org/D71595
This removes 2 precompiled binaries, adds testing
for STO_* flags missing, refines and renames the test.
Differential revision: https://reviews.llvm.org/D71651
We have the `elf-dynamic-tags-machine-specific.yaml` input shared
between the llvm-readobj and llvm-objdump test.
It looks strange, because tools usually does not share inputs.
Also there are following problems related:
1) `elf-dynamic-tags-machine-specific.yaml` input contains excessive YAML parts.
2) objdump's test case never test AARCH64 tags.
3) There are unknown tags in the `elf-dynamic-tags-machine-specific.yaml` and
`dynamic-tags-machine-specific.test`, though we already testing unknown tags
in `\llvm-readobj\ELF\dynamic-tags.test` and `llvm-objdump\elf-dynamic-section.test` tests.
This patch removes the shared input and refines the test cases to resolve
issues mentioned.
Differential revision: https://reviews.llvm.org/D71602
In this test case we use 3 precompiled objects to
test how we print a histogram for an GNU hash section.
It does not make sense to use precompiled objects
for that. Also we could have 2 tests: one for 32 and
another for 64 bits target.
This patch does this change. It is not possible to remove
these precompiled objects because they are used elsewhere.
Differential revision: https://reviews.llvm.org/D71606
GNU uses `l` for SHF_X86_64_LARGE and `y` for SHF_ARM_PURECODE.
Lets follow.
To do this I had to refactor and refine how we print the help flags description.
It was too generic and inconsistent with GNU readelf.
Differential revision: https://reviews.llvm.org/D71464
Our logic that dumped the flags was buggy.
For LLVM style it dumped SHF_MASKPROC/SHF_MASKOS named constants, though
they are not flags, but masks.
For GNU style it was just very inconsistent with GNU which has logic
that is not straightforward. Imagine we have sh_flags == 0x90000000.
SHF_EXCLUDE ("E") has a value of 0x80000000 and SHF_MASKPROC is 0xf0000000.
GNU readelf will not print "E" or "Ep" in this case, but will print just
"p". It only will print "E" when no other processor flag is set.
I had to investigate the GNU source to find the algorithm and now our logic should
match it.
Differential revision: https://reviews.llvm.org/D71462
I've noticed that when we have all regular flags set, we print "WAEXMSILoGTx"
instead of "WAXMSILOGTCE" printed by GNU readelf.
It happens because:
1) We print SHF_EXCLUDE at the wrong place.
2) We do not recognize SHF_COMPRESSED, we print "x" instead of "C".
3) We print "o" instead of "O" for SHF_OS_NONCONFORMING.
This patch fixes differences and adds test cases.
Differential revision: https://reviews.llvm.org/D71418
This:
1) Adds a test for testing all section flags (`section-flags.test`).
2) Renames `sec-flags.test`->`section-arch-flags.test`
and performs a clean up.
3) Removes `compression.zlib.style.elf-x86-64` binary and a test case
for SHF_COMPRESSED flag, because them are now excessive.
4) Adds missing MIPS flags and a test for SHF_ARM_PURECODE.
Differential revision: https://reviews.llvm.org/D71333
tools/llvm-readobj currently contains tests that are either general for
all file types or that mix file types inside. This patch refactors
these test and leaves only general tests in that folder. All other
tests were moved to ELF/COFF/MachO and wasm accordingly.
I tried to minimize amount of changes, so most of the test parts
remained unchanged. Any further refactorings and improvements for
particular tests should be done independently from this patch.
Differential revision: https://reviews.llvm.org/D71269
After recent changes it is now seems possible to get rid of
printing '\n' before each error and warning. This makes the output
cleaner.
Differential revision: https://reviews.llvm.org/D71246
It is discussed here https://reviews.llvm.org/D71118#inline-643172
Currently when a version is empty, llvm-readelf prints:
"000: 0 (*local*) 2 (<corrupt>)"
But GNU readelf does not treat empty section as corrupt.
There is no sense in having empty versions anyways it seems, but
this change is for consistency with GNU.
Differential revision: https://reviews.llvm.org/D71243
ARMWinEHPrinter was already designed to handle linked PE images
(since d2941b43f4), but resolving symbols didn't consistently
take the image base into account (as linked images seldom have a
symbol table, except for in MinGW setups).
Win64EHDumper wasn't really designed to handle linked images (it would
crash if executed on such a file), but a few concepts (getSymbol,
taking a virtual address instead of a relocation, and
getSectionContaining for finding the section containing a certain
virtual address) can be borrowed from ARMWinEHPrinter.
Adjust ARMWinEHPrinter to print the address of the exception handler
routine as a VA instead of an RVA, consistently with other addresses
in the same printout, and make Win64EHDumper print addresses similarly
for image cases.
Differential Revision: https://reviews.llvm.org/D71303
I was investigating a change previously discussed that eliminates an excessive
empty lines from the output when we report warnings and errors
(https://reviews.llvm.org/D70826#inline-639055) and found
that we need this refactoring or alike to achieve that.
The problem is that some of our functions that finds symbol versions just
fail instead of returning errors or printing warnings. Another problem
is that they might print a warning on the same line with the regular output.
In this patch I've splitted getting of the version information and dumping of it
for GNU printVersionSymbolSection(). I had to change a few methods to return
Error or Expected<> to do that properly.
Differential revision: https://reviews.llvm.org/D71118
This creates the next subfolders in the test directory:
"COFF", "ELF", "MachO", "wasm".
I've also removed platform specific prefixes, like "coff-*".
One unused binary was removed as well: `Inputs/relocs.obj.elf-mips`
Differential revision: https://reviews.llvm.org/D71203
Mostly this adds testing for certain aliases in more explicit ways.
There are also a few tidy-ups, and additions of missing testing, where
the feature was either not tested at all, or not tested explicitly and
sufficiently.
Reviewed by: MaskRay, rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D71116
This introduce a new helper which is used to parse the SHT_GNU_versym section.
LLVM/GNU styles implementations now use it to share the logic.
Differential revision: https://reviews.llvm.org/D71054
The PT_GNU_PROPERTY is generated by a linker to describe the
.note.gnu.property section. The Linux kernel uses this program header to
locate the .note.gnu.property section.
It is described in "The Linux gABI extension"
Include support for llvm-readelf, llvm-readobj and the yaml reader and
writers.
Differential Revision: https://reviews.llvm.org/D70959
This is a follow-up requested in comments for D70826.
It changes the message from
"section X has a sh_offset (Y) + sh_size (Z) that cannot be represented"
to
"section X has a sh_offset (Y) + sh_size (Z) that is greater than the file size (0xABC)"
when section's sh_offset + sh_size overruns a file buffer.
Differential revision: https://reviews.llvm.org/D70893
After changes introduced in D70495 and D70826 its now possible
to significantly simplify the code we have.
This also fixes an issue: previous code assumed that version strings
should always be read from the dynamic string table. While it is
normally true, the string table should be taken from the corresponding
sh_link field.
Differential revision: https://reviews.llvm.org/D70855
This is similar to D70495, but for SHT_GNU_verneed section.
It solves the same problems: different implementations, lack of error reporting
and no test coverage.
DIfferential revision: https://reviews.llvm.org/D70826
Elfxx_Verdef contains the following field:
vd_version
Version revision. This field shall be set to 1.
(https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/symversion.html)
Our code should check the struct version for correctness. This patch does that.
(This will help to simplify or eliminate ELFDumper<ELFT>::LoadVersionDefs() which
has it's own logic to parse version definitions for no reason. It checks the
struct version currently).
Differential revision: https://reviews.llvm.org/D70810
When we dump SHT_GNU_verdef section that has sh_link that references a non-existent section,
llvm-readobj reports a warning and continues dump, but llvm-readelf fails with a error.
This patch fixes the issue and opens road for futher follow-ups for
improving the printGNUVersionSectionProlog().
Differential revision: https://reviews.llvm.org/D70776
Currently we have 2 tests for testing versioning sections:
1) elf-versioninfo.test
2) elf-invalid-versioning.test
The first one currently checks how versioning sections are dumped +
how tools dump invalid SHT_GNU_verdef section.
The second despite of its name contains only tests for invalid SHT_GNU_verneed section.
In this patch I`ve renamed elf-invalid-versioning.test->elf-verneed-invalid.test,
and moved a few tests from elf-versioninfo.test to a new elf-verdef-invalid.test.
It will help to maintain these and a new tests for broken versioning sections.
Differential revision:
This is a follow-up discussed in D70495 thread.
The current logic is unusual for llvm-readobj. It doesn't print predecessors
list when it is empty. This is not good for machine parsers.
D70495 had to add this condition during refactoring to reduce amount of changes,
in tests, because the original code also had a similar logic.
Now seems it is time to get rid of it. This patch does it.
Differential revision: https://reviews.llvm.org/D70717
Currently we have following issues:
1) We have 2 different implementations with a different behaviors for GNU/LLVM styles.
2) Errors are either not handled at all or we call report_fatal_error with not helpfull messages.
3) There is no test coverage even for those errors that are reported.
This patch reimplements parsing of the SHT_GNU_verdef section entries
in a single place, adds a few error messages and test coverage.
Differential revision: https://reviews.llvm.org/D70495
I've added a few tests that shows how the current code could overrun the section data
buffer while dumping. I had to rewrite the code to fix this.
Differential revision: https://reviews.llvm.org/D70112
Our elf-versioninfo.test is not perfect. It does not properly test how
flags are dumped and also we have a bug: they are dumped as enums in
LLVM style now, i.e not dumped properly.
GNU style uses a `versionFlagToString` method to build a string from flags
which seems is consistent with GNU readelf.
In this patch I fixed the issues mentioned.
Differential revision: https://reviews.llvm.org/D70399
This converts elf-linker-options.ll to use yaml2obj instead of llc,
improves and cleanups it a bit.
This opens a road to add an additional tests for checking the broken cases.
Differential revision: https://reviews.llvm.org/D70004
It converts binary contents of .hash and .gnu.hash that were generated by a linker
to YAML descriptions.
I've also dropped Shift2 and BloomFilter values because they are not needed here.
Differential revision: https://reviews.llvm.org/D69881
Also only print each such warning once.
LLVM-style output will now print "<?>" for sections it cannot identify,
e.g. because the section index is invalid. GNU output continues to print
the raw index. In both cases where the st_shndx value is SHN_XINDEX and
the index cannot be looked up in the SHT_SYMTAB_SHNDX section (e.g.
because it is missing), the symbol is printed like other symbols with
st_shndx >= SHN_LORESERVE.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D69671
getSectionIndexName was trying to fetch two things at once, which led to
a somewhat tricky to understand interface involving passing output
parameters in, and also made it hard to return Errors further up the
stack.
This change is in preparation for changing the error handling.
Additionally, update a related test now that yaml2obj supports
SHT_SYMTAB_SHNDX properly (see d3963051c4), and add missing LLVM-style
coverage for symbols with shndx SHN_XINDEX. This test (after fixing)
caught a mistake in my first attempt at this patch, hence I'm including
it as part of this patch.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D69670
This updates the elf-invalid-versioning.test test case:
makes a cleanup, adds llvm-readobj calls and fixes 2
crash/assert issues I've found (test cases are provided).
Differential revision: https://reviews.llvm.org/D68705
Before this change .symtab section was required for SHT_REL[A] section
declarations. yaml2obj automatically defined it in case when YAML document
did not have it.
With this change it is now possible to produce an object that
has a relocation section, but has no symbol table.
It simplifies the code and also it is inline with how we handle Link fields
for another special sections.
Differential revision: https://reviews.llvm.org/D69260
SHT_NOTE is the section that consists of
namesz, descsz, type, name + padding, desc + padding data.
This patch teaches yaml2obj, obj2yaml to dump and parse them.
This patch implements the section how it is described here:
https://docs.oracle.com/cd/E23824_01/html/819-0690/chapter6-18048.html
Which says: "For 64–bit objects and 32–bit objects, each entry is an array of 4-byte words in
the format of the target processor"
The official specification is different
http://www.sco.com/developers/gabi/latest/ch5.pheader.html#note_section
And says: "n 64-bit objects (files with e_ident[EI_CLASS] equal to ELFCLASS64), each entry is an array
of 8-byte words in the format of the target processor. In 32-bit objects (files with e_ident[EI_CLASS]
equal to ELFCLASS32), each entry is an array of 4-byte words in the format of the target processor"
Since LLVM uses the first, 32-bit way, this patch follows it.
Differential revision: https://reviews.llvm.org/D68983
It returns just a section_iterator currently and have a report_fatal_error call inside.
This change adds a way to return errors and handle them on caller sides.
The patch also changes/improves current users and adds test cases.
Differential revision: https://reviews.llvm.org/D69167
llvm-svn: 375408
This patch tries to resolve problems faced in D68943
and uses some of the code written by Konrad Wilhelm Kleine
in that patch.
Previously, yaml2obj tool always created a .symtab section.
This patch changes that. With it we only create it when
have a "Symbols:" tag in the YAML document or when
we need to create it because it is used by another section(s).
obj2yaml follows the new behavior and does not print "Symbols:"
anymore when there is no symbol table.
Differential revision: https://reviews.llvm.org/D69041
llvm-svn: 375361
Summary:
Also changes the wasm YAML format to reflect the possibility of having
multiple return types and to put the returns after the params for
consistency with the binary encoding.
Reviewers: aheejin, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, arphaman, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69156
llvm-svn: 375283
SUMMARY:
in the xcoff, if the number of relocation entries or line number entries is
overflow(large than or equal 65535) , there will be overflow section for it.
The interpret of overflow section is different with generic section header,
the patch implement parsing the overflow section.
Reviewers: hubert.reinterpretcast,sfertile,jasonliu
Subscribers: rupprecht, seiya
Differential Revision: https://reviews.llvm.org/D68575
llvm-svn: 374941
This removes a few fields that are not useful:
"Section Name", "Address", "Offset" and "Link"
(they duplicated the information available under
the "Sections [" tag).
Differential revision: https://reviews.llvm.org/D68704
llvm-svn: 374541
This is similar to D68086.
We are entering an infinite loop when dumping a histogram for a specially crafted
.hash section with a loop in a chain.
Differential revision: https://reviews.llvm.org/D68771
llvm-svn: 374344
This patch:
* Adds a llvm-readobj/llvm-readelf test file for SHT_LLVM_ADDRSIG sections. (we do not have any)
* Enables dumping of SHT_LLVM_ADDRSIG with --all.
* Changes the logic to report a warning instead of an error when something goes wrong during dumping
(allows to continue dumping SHT_LLVM_ADDRSIG and other sections on error).
* Refactors a piece of logic to a new toULEB128Array helper which might be used for GNU-style
dumping implementation.
Differential revision: https://reviews.llvm.org/D68383
llvm-svn: 373890
In this patch `llvm-readobj` prints ASEs flags on a single line
separated by a comma. GNU `readelf` prints each ASEs flag on
a separate line. It will be fixed later.
llvm-svn: 373732
Having a precompiled binary here is excessive.
I also added a few missing tags.
Differential revision: https://reviews.llvm.org/D68386
llvm-svn: 373594
It is possible to craft a .hash section that triggers an infinite loop
in llvm-readelf code. This patch fixes the issue and introduces
a warning.
Differential revision: https://reviews.llvm.org/D68086
llvm-svn: 373476
D68110 added --arch-specific (supported by GNU readelf) and made
--arm-attributes an alias for it. The tests were later migrated to use
--arch-specific.
Note, llvm-readelf --arch-specific currently just uses llvm-readobj
style output for ARM attributes. The readelf-style output is not
implemented.
Reviewed By: compnerd, kongyi, rupprecht
Differential Revision: https://reviews.llvm.org/D68196
llvm-svn: 373291
This is for compatibility with GNU readobj. --arm-attributes option is
left as a hidden alias due to large number of tests using it.
Differential Revision: https://reviews.llvm.org/D68110
llvm-svn: 373125
I started this patch as a refactoring, tried to make a helper for
getting symbol names, similar to how we get section names
used in warning messages.
So this patch cleanups the code and fixes an issue: symbol names
in warning messages were not demangled.
Differential revision: https://reviews.llvm.org/D68012
llvm-svn: 372867
This is a follow-up for D67757,
which allows to describe .stack_sizes sections with a new
YAML syntax.
Differential revision: https://reviews.llvm.org/D67759
llvm-svn: 372855
The crash might happen when we have either a broken or unsupported object
and trying to resolve relocations when dumping the .stack_sizes section.
For the test case I used a 32-bits ELF header and a 64-bit relocation.
In this case a null pointer is returned by the code instead of the relocation
resolver function and then we crash.
Differential revision: https://reviews.llvm.org/D67962
llvm-svn: 372838
.stack_sizes is a SHT_PROGBITS section that contains pairs of
<address (4/8 bytes), stack size (uleb128)>.
This patch teach tools to parse and dump it.
Differential revision: https://reviews.llvm.org/D67757
llvm-svn: 372762
llvm-readobj currently handles .stack_sizes.* (e.g. .stack_sizes.foo)
as a normal stack sizes section. Though MC does not produce sections with
such names. Also, linkers do not combine .stack_sizes.* into .stack_sizes.
A mini discussion about this correctness issue is here: https://reviews.llvm.org/D67757#inline-609274
This patch changes implementation so that only now only '.stack_sizes' name is
accepted as a real stack sizes section.
Differential revision: https://reviews.llvm.org/D67824
llvm-svn: 372578
Before this patch we gave a priority to a dynamic table found
from the section header.
It was discussed (here: https://reviews.llvm.org/D67078?id=218356#inline-602082)
that probably preferring the table from PT_DYNAMIC is better,
because it is what runtime loader sees.
This patch makes the table from PT_DYNAMIC be chosen at first place if it is available.
But also it adds logic to fall back to SHT_DYNAMIC if the table from the dynamic segment is
broken or fall back to use no table if both are broken.
It adds a few more diagnostic warnings for the logic above.
Differential revision: https://reviews.llvm.org/D67547
llvm-svn: 372122
We had a precompiled binary committed and not all of the relocations
supported were tested. This patch fixes this.
Differential revision: https://reviews.llvm.org/D67617
llvm-svn: 372110
The "TODO" mentioned was:
"Add test for symbol with no name but with a value once yaml2obj allows
referencing symbols with no name from relocations."
We can do it now.
Differential revision: https://reviews.llvm.org/D67609
llvm-svn: 372087
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=40785.
llvm-readelf does not print the st_value of the symbol when
st_value has any non-visibility bits set.
This patch:
* Aligns "Ndx" row for the default and a new cases.
(it was 1 space character off for the case when "PROTECTED" visibility was printed)
* Prints "[<other>: 0x??]" for symbols which has an additional st_other bits set.
In compare with GNU, this logic is a bit simpler and seems to be more consistent.
For MIPS GNU can print named flags, though can't print a mix of them:
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 NOTYPE GLOBAL DEFAULT [OPTIONAL] UND a1
2: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS PLT] UND a2
3: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS PIC] UND a3
4: 00000000 0 NOTYPE GLOBAL DEFAULT [MICROMIPS] UND a4
5: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS16] UND a5
6: 00000000 0 NOTYPE GLOBAL DEFAULT [<other>: c] UND b1
7: 00000000 0 NOTYPE GLOBAL DEFAULT [<other>: 28] UND b2
On PPC64 it can print a localentry value that is encoded in the high bits of st_other
63: 0000000000000850 208 FUNC GLOBAL DEFAULT [<localentry>: 8] 12
We chose to print the raw st_other field, prefixed with '0x'.
Differential revision: https://reviews.llvm.org/D67094
llvm-svn: 371201
See http://lists.llvm.org/pipermail/llvm-dev/2019-February/130583.html
and D60242 for the lld partition feature.
This patch:
* Teaches yaml2obj to parse the 3 section types.
* Teaches llvm-readobj/llvm-readelf to dump the 3 section types.
There is no test for SHT_LLVM_DEPENDENT_LIBRARIES in llvm-readobj. Add
it as well.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D67228
llvm-svn: 371157
Linkers (ld.bfd/gold/lld) place the section header table at the very
end. This allows tools to strip it, which is optional in executable/shared objects.
In addition, if we add or section, the size of the section header table
will change. Placing the section header table in the end keeps section
offsets unchanged.
yaml2obj currently places the section header table immediately after the
program header. Follow what linkers do to make offset updating easier.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67221
llvm-svn: 371074
D62179 introduced a regression. llvm-readelf lose the ability to dump the dynamic symbols
when there is .dynamic section with a DT_SYMTAB, but there are no program headers:
https://reviews.llvm.org/D62179#1652778
Below is a program flow before the D62179 change:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => don't try to parse it.
3) Print dynamic symbols using information about them found on step (1).
And after the change it became:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => find SHT_DYNAMIC.
3) Parse dynamic table, but fail to handle the DT_SYMTAB because of the absence of the PT_LOAD. Report the "Virtual address is not in any segment" error.
This patch fixes the issue. For doing this it checks that the value of DT_SYMTAB was
mapped to a segment. If not - it ignores it.
Differential revision: https://reviews.llvm.org/D67078
llvm-svn: 371071
Currenly we can encode the 'st_other' field of symbol using 3 fields.
'Visibility' is used to encode STV_* values.
'Other' is used to encode everything except the visibility, but it can't handle arbitrary values.
'StOther' is used to encode arbitrary values when 'Visibility'/'Other' are not helpfull enough.
'st_other' field is used to encode symbol visibility and platform-dependent
flags and values. Problem to encode it is that it consists of Visibility part (STV_* values)
which are enumeration values and the Other part, which is different and inconsistent.
For MIPS the Other part contains flags for all STO_MIPS_* values except STO_MIPS_MIPS16.
(Like comment in ELFDumper says: "Someones in their infinite wisdom decided to make
STO_MIPS_MIPS16 flag overlapped with other ST_MIPS_xxx flags."...)
And for PPC64 the Other part might actually encode any value.
This patch implements custom logic for handling the st_other and removes
'Visibility' and 'StOther' fields.
Here is an example of a new YAML style this patch allows:
- Name: foo
Other: [ 0x4 ]
- Name: bar
Other: [ STV_PROTECTED, 4 ]
- Name: zed
Other: [ STV_PROTECTED, STO_MIPS_OPTIONAL, 0xf8 ]
Differential revision: https://reviews.llvm.org/D66886
llvm-svn: 370472
This allows llvm-readobj to print the contents of each resource
when printing resources from an object file or executable, like it
already does for plain .res files.
This requires providing the whole COFFObjectFile to ResourceSectionRef.
This supports both object files and executables. For executables,
the DataRVA field is used as is to look up the right section.
For object files, ideally we would need to complete linking of them
and fix up all relocations to know what the DataRVA field would end up
being. In practice, the only thing that makes sense for an RVA field
is an ADDR32NB relocation. Thus, find a relocation pointing at this
field, verify that it has the expected type, locate the symbol it
points at, look up the section the symbol points at, and read from the
right offset in that section.
This works both for GNU windres object files (which use one single
.rsrc section, with all relocations against the base of the .rsrc
section, with the original value of the DataRVA field being the
offset of the data from the beginning of the .rsrc section) and
cvtres object files (with two separate .rsrc$01 and .rsrc$02 sections,
and one symbol per data entry, with the original pre-relocated DataRVA
field being set to zero).
Differential Revision: https://reviews.llvm.org/D66820
llvm-svn: 370433
When we have a dynamic relocation with a broken symbol's st_name,
tools report a useless error: "Invalid data was encountered while parsing the file".
After this change we report a warning + "<corrupt>" as a symbol name.
Differential revision: https://reviews.llvm.org/D66734
llvm-svn: 370330
Summary:
This patch implements main entry and auxiliary entries of symbol table generation for llvm-readobj on AIX.
The source code of aix_xcoff_xlc_test8.o (compile with xlc) is:
-bash-4.2$ cat test8.c
extern int i;
extern int TestforXcoff;
extern int fun(int i);
static int static_i;
char* p="abcd";
int fun1(int j) {
static_i++;
j++;
j=j+*p;
return j;
}
int main() {
i++;
fun(i);
return fun1(i);
}
Patch provided by DiggerLin
Differential Revision: https://reviews.llvm.org/D65240
llvm-svn: 370097
st_other field of a symbol usually contains its visibility.
Other bits are usually 0, though some targets, like
MIPS can set them using the named bit field values.
Problem is that there is no way to set an arbitrary value now,
though that might be useful for our test cases.
In this patch I introduced a way to set st_other to any numeric
value using the new StOther field.
I added a test and simplified the existent one to show the effect/benefit
Differential revision: https://reviews.llvm.org/D66583
llvm-svn: 369742
This fixes https://bugs.llvm.org/show_bug.cgi?id=40337.
Previously, it was always assumed that relocations referenced symbols in the static symbol table.
Now, if the Link field references a section called ".dynsym" it will look up these symbols
in the dynamic symbol table.
This patch is heavily based on D59097 by James Henderson
Differential revision: https://reviews.llvm.org/D66532
llvm-svn: 369645
Summary:
Currently, we report:
error: ...
Prepend argv[0] (tool name):
llvm-readobj: error: ...
This is consistent with most GNU binutils/clang/lld, and gives a bit
more context in a long build log.
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D66425
llvm-svn: 369377
This patch makes a change for test/Object tests responsible
for relocations.
* 2 tests were moved to llvm-readobj/llvm-objdump folders:
Object/elf-reloc-no-sym.test -> tools/llvm-readobj/elf-reloc-no-sym.test
Object/objdump-reloc-shared.test -> tools/llvm-objdump/relocations-in-nonreloc.test
* A prerecompiled binary was removed and these tests were refactored.
Differential revision: https://reviews.llvm.org/D66291
llvm-svn: 369342
Fix: Add a `consumeError` call removed by mistake to 'printStackSize',
this should fix the "Expected<T> must be checked before access or destruction." reported by following bot:
http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/9743/steps/stage%201%20check/logs/stdio
Original commit message:
Currently we have the following functions for error reporting:
LLVM_ATTRIBUTE_NORETURN void reportError(Twine Msg);
void reportError(Error Err, StringRef Input);
void reportWarning(Twine Msg);
void reportWarning(StringRef Input, Error Err);
void warn(llvm::Error Err);
void error(std::error_code EC);
Problems are: naming is inconsistent, arguments order is inconsistent,
some of the functions looks excessive.
After applying this patch we have:
void reportError(Error Err, StringRef Input);
void reportError(std::error_code EC, StringRef Input);
void reportWarning(Error Err, StringRef Input);
I'd be happy to remove reportError(std::error_code EC, StringRef Input) too, but it
is used by COFF heavily.
Test cases were updated, they show an improvement introduced.
Differential revision: https://reviews.llvm.org/D66286
llvm-svn: 369194
urrently we have the following functions for error reporting:
--
LLVM_ATTRIBUTE_NORETURN void reportError(Twine Msg);
void reportError(Error Err, StringRef Input);
void reportWarning(Twine Msg);
void reportWarning(StringRef Input, Error Err);
void warn(llvm::Error Err);
void error(std::error_code EC);
---
Problems are: naming is inconsistent, arguments order is inconsistent,
some of the functions looks excessive.
After applying this patch we have:
---
LLVM_ATTRIBUTE_NORETURN void reportError(Error Err, StringRef Input);
LLVM_ATTRIBUTE_NORETURN void reportError(std::error_code EC, StringRef Input);
void reportWarning(Error Err, StringRef Input);
---
I'd be happy to remove reportError(std::error_code EC, StringRef Input) too, but it
is used by COFF heavily.
Test cases were updated, they show an improvement introduced.
Differential revision: https://reviews.llvm.org/D66286
llvm-svn: 369190
There are 2 similar openbsd-phdrs.elf-x86-64 objects committed and
used in test/Object and test/tools/llvm-objdump test cases.
There is no reason to have them, we can use YAML instead. Patch does that.
Differential revision: https://reviews.llvm.org/D66342
llvm-svn: 369189
This addresses the issue introduced in r369169, we need to unwrap
the value first before we can check whether it's empty. This also
swaps the two branches to put the common path first which should
be NFC.
llvm-svn: 369177
This is useful when trying to read notes from stripped files and matches
the behavior of GNU readelf and eu-readelf.
Differential Revision: https://reviews.llvm.org/D66358
llvm-svn: 369169
Summary:
This patch implements two note parsers; one for NT_FILE coredumps, e.g.:
```
CORE 0x00000080 NT_FILE (mapped files)
Page size: 4096
Start End Page Offset
0x0000000000001000 0x0000000000002000 0x0000000000003000
/path/to/a.out
0x0000000000004000 0x0000000000005000 0x0000000000006000
/path/to/libc.so
0x0000000000007000 0x0000000000008000 0x0000000000009000
[stack]
```
(A more realistic example can be tested locally by creating a crashing program and running `llvm-readelf -n core`)
And also implements a raw hex dump for unknown descriptor data for unhandled descriptor types.
Reviewers: MaskRay, jhenderson, grimar, alexshap
Reviewed By: MaskRay, grimar
Subscribers: emaste, llvm-commits, labath
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65832
llvm-svn: 368698
For type values that do not have proper names, print reasonable representation
in llvm-nm, llvm-readobj and llvm-readelf, matching GNU tools.s
Fixes PR41713.
Differential Revision: https://reviews.llvm.org/D65537
llvm-svn: 368451
This patch addresses two closely related bugs:
https://bugs.llvm.org/show_bug.cgi?id=42930 and
https://bugs.llvm.org/show_bug.cgi?id=42931.
GNU readelf prints the file name for every input unless there is only
one input and that input is not an archive. This patch adds the printing
for multiple inputs. A previous change did it for archives, but
introduced a regression with GNU compatibility for single-output
formatting, resulting in a spurious initial blank line. This is fixed in
this patch too.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D65953
llvm-svn: 368435
This patch changes the code to use a modern unwrapOrError(StringRef Input, Expected<T> EO)
version that contains the input source name and removes the deprecated version.
Differential revision: https://reviews.llvm.org/D65946
llvm-svn: 368428
In some cases a symbol might have section index == SHN_XINDEX.
This is an escape value indicating that the actual section header index
is too large to fit in the containing field.
Then the SHT_SYMTAB_SHNDX section is used. It contains the 32bit values
that stores section indexes.
ELF gABI says that there can be multiple SHT_SYMTAB_SHNDX sections,
i.e. for example one for .symtab and one for .dynsym
(1) https://groups.google.com/forum/#!topic/generic-abi/-XJAV5d8PRg
(2) DT_SYMTAB_SHNDX: http://www.sco.com/developers/gabi/latest/ch5.dynamic.html
In this patch I am only supporting a single SHT_SYMTAB_SHNDX associated
with a .symtab. This is a more or less common case which is used a few tests I saw in LLVM.
I decided not to create the SHT_SYMTAB_SHNDX section as "implicit",
but implement is like a kind of regular section for now.
i.e. tools do not recreate this section or its content, like they do for
symbol table sections, for example. That should allow to write all kind of
possible broken test cases for our needs and keep the output closer to requested.
Differential revision: https://reviews.llvm.org/D65446
llvm-svn: 368272
Currently, we have a code duplication in llvm-readobj which was introduced in D63266.
The duplication was introduced to allow llvm-readobj to dump the partially
broken object. Methods in ELFFile<ELFT> perform a strict validation of the inputs,
what is itself good, but not for dumper tools, that might want to dump the information,
even if some pieces are broken/unexpected.
This patch introduces a warning handler which can be passed to ELFFile<ELFT> methods
and can allow skipping the non-critical errors when needed/possible.
For demonstration, I removed the duplication from llvm-readobj and implemented a warning using
the new custom warning handler. It also deduplicates the strings printed, making the output less verbose.
Differential revision: https://reviews.llvm.org/D65515
llvm-svn: 368260
readelf -n:
```
// "Data size" is not left justified
Owner Data size Description
GNU 0x00000010 NT_GNU_ABI_TAG (ABI version tag)
```
llvm-readelf -n (before):
```
// "Data size" column shifted by 1
Owner Data size Description
GNU 0x00000010 NT_GNU_ABI_TAG (ABI version tag)
```
llvm-readelf -n (after):
```
Owner Data size Description
GNU 0x00000010 NT_GNU_ABI_TAG (ABI version tag)
```
This change is made to reduce the diff with readelf -n, so that it is
slightly easier to check what features readelf implements but we don't.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D65847
llvm-svn: 368138
The ELF for the Arm 64-bit Architecture document originally specified
R_AARCH64_TLS_DTPREL64 = 0x404
R_AARCH64_TLS_DTPMOD64 = 0x405
LLVM correctly followed the document. Unfortunately in binutils these
two codes were reversed:
R_AARCH64_TLS_DTPMOD64 = 0x404
R_AARCH64_TLS_DTPREL64 = 0x405
Given that binaries had shipped this change has become the defacto standard
interpretation of these relocation codes for any toolchain that wanted to
remain compatible with GNU.
To recognize this the latest version of the ABI document has renamed
the relocations to R_AARCH64_TLS_IMPDEF1 and R_AARCH64_TLS_IMPDEF2
permitting a toolchain to choose between the two relocation types, and
recommending that toolchains follow the GNU interpretation for maximum
compatibility.
Given that upstream llvm has never implemented the standard TLS model for
AArch64 so we have no binary legacy, synchronize with GCC so that we don't
create incompatible objects in the future. So far the only visible change
is in llvm-readobj as it can decode these relocations. Tthis change will
mean that llvm-readobj decodes the same way as GNU readelf.
fixes PR40507
llvm-svn: 367437
This patch touches a few test cases:
It removes dtflags.elf-x86-64 binary and elf-dtflags.test.
elf-dtflags.test is excessive because we have the
elf-dynamic-tags.test which test all non-machine specific tags.
It removes testing of --dynamic-table from test\Object\readobj-shared-object.test
(we have the elf-dynamic-tags.test for that), and simplifies this test case.
It moves testing of the headers from readobj-shared-object.test
to elf-file-headers.test.
Adds test/tools/llvm-readobj/elf-file-types.test and test/tools/llvm-readobj/elf-loadname.test.
It opens road for removing the readobj-shared-object.test completely soon.
Differential revision: https://reviews.llvm.org/D65068
llvm-svn: 366895
When e_shstrndx is broken, it is impossible to get a section name.
In this patch I improved the error message we show and
added tests for Object and for llvm-readelf/llvm-readobj
Message was changed in two places:
1) llvm-readelf/llvm-readobj previously used a code from Object/ELF.h,
now they have a modified version of it (it has less checks and allows
dumping broken things).
2) Code in Object/ELF.h is still used for generic cases.
Differential revision: https://reviews.llvm.org/D64714
llvm-svn: 366203
This patch improves the error messages reported for
note sections and phdrs and also makes a cleanup for
existent test case.
Differential revision: https://reviews.llvm.org/D64470
llvm-svn: 365884
This patch improves the error messages reported for
note sections and phdrs and also makes a cleanup for
existent test case.
Differential revision: https://reviews.llvm.org/D64470
llvm-svn: 365775
It does not make sence to stop dumping the object if the broken
dynamic section was found. In this patch I changed the behavior from
"report an error" to "report a warning". This matches GNU.
Differential revision: https://reviews.llvm.org/D64472
llvm-svn: 365762
Adds a readobj dumper for 32-bit and 64-bit section header tables, and extend
support for the file-header dumping to include 64-bit object files. Also
refactors the binary file parsing to be done in a helper function in an attempt
to cleanup error handeling.
Differential Revision: https://reviews.llvm.org/D63843
llvm-svn: 365524
This patch removes trivial-object-test.elf-i386,
trivial-object-test.elf-x86-64 and trivial-object-test2.elf-x86-64
precompiled objects from test/Object/Inputs folder.
I adjusted the existent test cases to use YAML instead.
Differential revision: https://reviews.llvm.org/D64206
llvm-svn: 365348
The errors coming from ELF.h are usually not very
useful because they are uninformative. This patch is a
first step to improve the situation.
I tested this patch with a run of check-llvm and found
that few messages are untested. In this patch, I did not
add more tests but marked all such cases with a "TODO" comment.
For all tested messages I extended the error text to
provide more details (see test cases changed).
Differential revision: https://reviews.llvm.org/D64014
llvm-svn: 365183
We do not need the elf-groups.x86_64. In one of the tests, it was
used for no solid reason, and for the second test case we can use
YAML input with SHT_GROUP sections.
The patch performs a cleanup of one of the test cases, removes another
one completely (since during the review was found out it actually
duplicates one of the existent tests) and removes the precompiled binary.
Differential revision: https://reviews.llvm.org/D63647
llvm-svn: 364167
There are some test that are splitted into main part + input yaml for no visible reason.
This patch inines the yaml part for the 3 test cases I found.
Differential revision: https://reviews.llvm.org/D63644
llvm-svn: 364049
Many LLVM-based tools already support response files (i.e. files
containing a list of options, specified with '@'). This change simply
updates the documentation and help text for some of these tools to
include it. I haven't attempted to fix all tools, just a selection that
I am interested in.
I've taken the opportunity to add some tests for --help behaviour, where
they were missing. We could expand these tests, but I don't think that's
within scope of this patch.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42233 and
https://bugs.llvm.org/show_bug.cgi?id=42236.
Reviewed by: grimar, MaskRay, jkorous
Differential Revision: https://reviews.llvm.org/D63597
llvm-svn: 364036
1) `-x foo` currently dumps one `foo`. This change makes it dump all `foo`.
2) `-x foo -x foo` currently dumps `foo` twice. This change makes it dump `foo` once.
In addition, if foo has section index 9, `-x foo -x 9` dumps `foo` once.
3) Give a warning instead of an error if `foo` does not exist.
The new behaviors match GNU readelf.
Also, print a new line as a separator between two section dumps.
GNU readelf uses two lines, but one seems good enough.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D63475
llvm-svn: 363683
LLD test case will be fixed in a following commit.
Original commit message:
[yaml2obj] - Allow setting custom section types for implicit sections.
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363401
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363377
If dynamic table is missing, output "dynamic strtab not found'. If the index is
out of range, output "Invalid Offset<..>".
https://bugs.llvm.org/show_bug.cgi?id=40807
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63084
Patch by Yuanfang Chen.
llvm-svn: 363374
Summary:
Use llvm::fouts() as the default stream for outputing. No new stream
should be constructed to output at the same time.
https://bugs.llvm.org/show_bug.cgi?id=42140
Reviewers: jhenderson, grimar, MaskRay, phosek, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63115
Patch by Yuanfang Chen!
llvm-svn: 363198
In glibc, DT_PPC_GOT indicates that PowerPC32 Secure PLT ABI is used.
I plan to use it in D62464.
DT_PPC_OPT currently indicates if a TLSDESC inspired TLS optimization is
enabled.
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D62851
llvm-svn: 362569
ELF for the 64-bit Arm Architecture defines two processor-specific dynamic
tags:
DT_AARCH64_BTI_PLT 0x70000001, d_val
DT_AARCH64_PAC_PLT 0x70000003, d_val
These presence of these tags indicate that PLT sequences have been
protected using Branch Target Identification and Pointer Authentication
respectively. The presence of both indicates that the PLT sequences have
been protected with both Branch Target Identification and Pointer
Authentication.
This patch adds the tags and tests for llvm-readobj and yaml2obj.
As some of the processor specific dynamic tags overlap, this patch splits
them up, keeping their original default value if they were not previously
mentioned explicitly in a switch case.
Differential Revision: https://reviews.llvm.org/D62596
llvm-svn: 362493
ELF for the 64-bit Arm Architecture defines a processor specific property
type GNU_PROPERTY_AARCH64_FEATURE_1_AND as GNU_PROPERTY_LOPROC. This
property works in a similar way to the existing X86 processor specific
property GNU_PROPERTY_GNU_X86_FEATURE_1_AND.
Two feature bits are defined for GNU_PROPERTY_AARCH64_FEATURE_1_AND:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI 0x1
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC 0x2
This patch defines the property, feature bits and implements support for
printing in llvm-readobj.
Differential Revision: https://reviews.llvm.org/D62595
llvm-svn: 362490
Includes a fix for an introduced build failure due to a post c++11 use of std::mismatch.
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362484
This reverts commit r362407. It broke compilation of
llvm/lib/Object/ArchiveWriter.cpp:
error: type 'llvm::sys::path::const_iterator' does not provide a call
operator
llvm-svn: 362413
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362407
gnu-sections.test currently use relocs.obj.elf-x86_64 and
relocs.obj.elf-i386 precompiled objects as an inputs.
These inputs actually initially were introduced to test the
dump of relocations and have almost nothing common with dumping
sections.
Patch converts the test to use yaml2obj. That allows to remove
relocs.obj.elf-i386 binary.
(relocs.obj.elf-x86_64 is still used by another test and can't be removed atm).
Differential revision: https://reviews.llvm.org/D62659
llvm-svn: 362377
rL362089 introduced a set of yaml based reloc-types-*.test test cases
(instead of huge reloc-types.test that used a lot of precompiled binaries)
These test cases checks LLVM-styled dumping of the relocations.
gnu-relocations.test was a test case to check GNU styled relocations dumping.
It did that only for elf-x86 and elf-x86_64 targets. It did not test all of the
relocations though.
Now, after rL362089, it does not make sence to keep it.
This patch updates reloc-types-elf-i386.test and reloc-types-elf-x64.test tests
with llvm-readelf calls to check GNU styled output in one place.
It removes gnu-relocations.test completely.
One of intentions of doing this is also to get rid of relocs.obj.elf-i386 and
relocs.obj.elf-x86_64 precompiled objects completely (they are used in other tests still).
Differential revision: https://reviews.llvm.org/D62655
llvm-svn: 362374
This change rewrites and splits reloc-types.test
to use yaml2obj instead of precompiled binaries.
That allowed to remove 7 precompiled objects from the inputs.
I took the existent objects, used obj2yaml on them, simplified the result and
used yaml2obj in the test case with the result.
Notes:
* I converted, but did not remove relocs.obj.elf-i386, relocs.obj.elf-x86_64 or relocs.obj.elf-mips objects
because found they are used in other tests.
* I was unable to convert relocs.obj.elf-ppc64, because obj2yaml hangs on this file for me.
* I was unable to convert relocs.obj.macho-arm, relocs.obj.macho-i386 and relocs.obj.macho-x86_64
because the output produced by obj2yaml does not seem to be correct.
* Because of the above I did not remove the script for creating all
of those objects: test\tools\llvm-readobj\Inputs\relocs.py
Differential revision: https://reviews.llvm.org/D62594
llvm-svn: 362089
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361943
This removes 2 precompiled objects from the test case and replaces
them with a single YAML. That allowed to simplify and clean up the test,
remove excessive checks.
Differential revision: https://reviews.llvm.org/D62529
llvm-svn: 361932
They were failing on 32-bit Windows. In the cases where I've changed
test expectations, I've checked that they match the output of GNU
readelf.
llvm-svn: 361807
GNU readelf tool prints slightly different dynamic table "header" and
surrounds dynamic tag names by brackets. This patch implements the same
formatting for GNU-style output of the `llvm-readobj`.
LLVM
```
DynamicSection [ (13 entries)
Tag Type Name/Value
0x00000006 SYMTAB 0x168
...
]
```
GNU
```
Dynamic section at offset 0x1d0 contains 13 entries:
Tag Type Name/Value
0x00000006 (SYMTAB) 0x168
...
```
Differential Revision: https://reviews.llvm.org/D62256
llvm-svn: 361633
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361630
This is a result of what I found during my work on https://bugs.llvm.org/show_bug.cgi?id=41679.
Previously LLVM readelf took the information about .dynamic section
from its PT_DYNAMIC segment only. GNU tools have a bit different logic.
They also use the information from the .dynamic section header if it is available.
This patch changes the code to improve the compatibility with the GNU Binutils.
Differential revision: https://reviews.llvm.org/D61937
llvm-svn: 361165
Summary:
This change enables `cl::Grouping` for short options --
options with names of a single character. This is consistent with GNU
getopt behavior.
Reviewers: rnk, MaskRay
Reviewed By: MaskRay
Subscribers: thopre, cfe-commits, MaskRay, rupprecht, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D61270
llvm-svn: 359917
Patch adds support for dumping of file headers with llvm-readobj. XCOFF
object files are added to test dumping a well formed file, and dumping
both negative timestamps and negative symbol counts, both of which are
allowed in the XCOFF definition.
Differential Revision: https://reviews.llvm.org/D60878
llvm-svn: 359878
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
For well-known type IDs, include the name of the type.
To not duplicate the ID->name map, make llvm-readobj call this new
function as well. It has slightly different output, so this also
requires updating a few tests.
Differential Revision: https://reviews.llvm.org/D61086
llvm-svn: 359153
This is a resubmission of a previous patch that caused test failures,
with the fixes for the relevant tests included.
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
llvm-svn: 358395
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
Differential Revision: https://reviews.llvm.org/D59946
llvm-svn: 357772
Georgii Rymar