This introduce a new helper which is used to parse the SHT_GNU_versym section.
LLVM/GNU styles implementations now use it to share the logic.
Differential revision: https://reviews.llvm.org/D71054
The PT_GNU_PROPERTY is generated by a linker to describe the
.note.gnu.property section. The Linux kernel uses this program header to
locate the .note.gnu.property section.
It is described in "The Linux gABI extension"
Include support for llvm-readelf, llvm-readobj and the yaml reader and
writers.
Differential Revision: https://reviews.llvm.org/D70959
After changes introduced in D70495 and D70826 its now possible
to significantly simplify the code we have.
This also fixes an issue: previous code assumed that version strings
should always be read from the dynamic string table. While it is
normally true, the string table should be taken from the corresponding
sh_link field.
Differential revision: https://reviews.llvm.org/D70855
This is similar to D70495, but for SHT_GNU_verneed section.
It solves the same problems: different implementations, lack of error reporting
and no test coverage.
DIfferential revision: https://reviews.llvm.org/D70826
Elfxx_Verdef contains the following field:
vd_version
Version revision. This field shall be set to 1.
(https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/symversion.html)
Our code should check the struct version for correctness. This patch does that.
(This will help to simplify or eliminate ELFDumper<ELFT>::LoadVersionDefs() which
has it's own logic to parse version definitions for no reason. It checks the
struct version currently).
Differential revision: https://reviews.llvm.org/D70810
When we dump SHT_GNU_verdef section that has sh_link that references a non-existent section,
llvm-readobj reports a warning and continues dump, but llvm-readelf fails with a error.
This patch fixes the issue and opens road for futher follow-ups for
improving the printGNUVersionSectionProlog().
Differential revision: https://reviews.llvm.org/D70776
This is a follow-up discussed in D70495 thread.
The current logic is unusual for llvm-readobj. It doesn't print predecessors
list when it is empty. This is not good for machine parsers.
D70495 had to add this condition during refactoring to reduce amount of changes,
in tests, because the original code also had a similar logic.
Now seems it is time to get rid of it. This patch does it.
Differential revision: https://reviews.llvm.org/D70717
Currently we have following issues:
1) We have 2 different implementations with a different behaviors for GNU/LLVM styles.
2) Errors are either not handled at all or we call report_fatal_error with not helpfull messages.
3) There is no test coverage even for those errors that are reported.
This patch reimplements parsing of the SHT_GNU_verdef section entries
in a single place, adds a few error messages and test coverage.
Differential revision: https://reviews.llvm.org/D70495
I've added a few tests that shows how the current code could overrun the section data
buffer while dumping. I had to rewrite the code to fix this.
Differential revision: https://reviews.llvm.org/D70112
Our elf-versioninfo.test is not perfect. It does not properly test how
flags are dumped and also we have a bug: they are dumped as enums in
LLVM style now, i.e not dumped properly.
GNU style uses a `versionFlagToString` method to build a string from flags
which seems is consistent with GNU readelf.
In this patch I fixed the issues mentioned.
Differential revision: https://reviews.llvm.org/D70399
SUMMARY:
According to https://reviews.llvm.org/D68575#inline-617586, Create a NFC patch for it.
Using crtp to refactor the xcoff section header
Move the define of SectionFlagsReservedMask and SectionFlagsTypeMask from XCOFFDumper.cpp to XCOFFObjectFile.h
Reviewers: hubert.reinterpretcast,jasonliu
Subscribers: rupprecht, seiyai,hiraditya
Differential Revision: https://reviews.llvm.org/D69131
Also only print each such warning once.
LLVM-style output will now print "<?>" for sections it cannot identify,
e.g. because the section index is invalid. GNU output continues to print
the raw index. In both cases where the st_shndx value is SHN_XINDEX and
the index cannot be looked up in the SHT_SYMTAB_SHNDX section (e.g.
because it is missing), the symbol is printed like other symbols with
st_shndx >= SHN_LORESERVE.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D69671
getSectionIndexName was trying to fetch two things at once, which led to
a somewhat tricky to understand interface involving passing output
parameters in, and also made it hard to return Errors further up the
stack.
This change is in preparation for changing the error handling.
Additionally, update a related test now that yaml2obj supports
SHT_SYMTAB_SHNDX properly (see d3963051c4), and add missing LLVM-style
coverage for symbols with shndx SHN_XINDEX. This test (after fixing)
caught a mistake in my first attempt at this patch, hence I'm including
it as part of this patch.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D69670
This updates the elf-invalid-versioning.test test case:
makes a cleanup, adds llvm-readobj calls and fixes 2
crash/assert issues I've found (test cases are provided).
Differential revision: https://reviews.llvm.org/D68705
It returns just a section_iterator currently and have a report_fatal_error call inside.
This change adds a way to return errors and handle them on caller sides.
The patch also changes/improves current users and adds test cases.
Differential revision: https://reviews.llvm.org/D69167
llvm-svn: 375408
SUMMARY:
in the xcoff, if the number of relocation entries or line number entries is
overflow(large than or equal 65535) , there will be overflow section for it.
The interpret of overflow section is different with generic section header,
the patch implement parsing the overflow section.
Reviewers: hubert.reinterpretcast,sfertile,jasonliu
Subscribers: rupprecht, seiya
Differential Revision: https://reviews.llvm.org/D68575
llvm-svn: 374941
This removes a few fields that are not useful:
"Section Name", "Address", "Offset" and "Link"
(they duplicated the information available under
the "Sections [" tag).
Differential revision: https://reviews.llvm.org/D68704
llvm-svn: 374541
This is similar to D68086.
We are entering an infinite loop when dumping a histogram for a specially crafted
.hash section with a loop in a chain.
Differential revision: https://reviews.llvm.org/D68771
llvm-svn: 374344
Summary:
According the the XCOFF document,
If
Then
XTY_SD
x_scnlen contains the csect length.
XTY_LD
x_scnlen contains the symbol table index of the containing csect.
XTY_CM
x_scnlen contains the csect length.
XTY_ER
x_scnlen contains 0.
Change the SectionLen member name to SectionOrLength is more reasonable.
Authored By: DiggerLin
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D68650
llvm-svn: 374179
This patch:
* Adds a llvm-readobj/llvm-readelf test file for SHT_LLVM_ADDRSIG sections. (we do not have any)
* Enables dumping of SHT_LLVM_ADDRSIG with --all.
* Changes the logic to report a warning instead of an error when something goes wrong during dumping
(allows to continue dumping SHT_LLVM_ADDRSIG and other sections on error).
* Refactors a piece of logic to a new toULEB128Array helper which might be used for GNU-style
dumping implementation.
Differential revision: https://reviews.llvm.org/D68383
llvm-svn: 373890
In this patch `llvm-readobj` prints ASEs flags on a single line
separated by a comma. GNU `readelf` prints each ASEs flag on
a separate line. It will be fixed later.
llvm-svn: 373732
Initially llvm-readobj supports multiple command line options like
`--arm-attributes` and `--mips-plt-got` for display ELF arch-specific
information. Now all these options are superseded by the
`--arch-specific` one. It makes sense to have a single `printArchSpecificInfo`
method in the base `ObjDumper`, and hide all ELF/target specific details
in the `ELFDumper::printArchSpecificInfo` override.
Differential Revision: https://reviews.llvm.org/D68385
llvm-svn: 373731
llvm-readobj "non-standard" flags `--mips-plt-got`, `--mips-abi-flags`,
`--mips-reginfo`, and `--mips-options` are superseded by the `--arch-specific`
flag and can be removed now.
llvm-svn: 373590
It is possible to craft a .hash section that triggers an infinite loop
in llvm-readelf code. This patch fixes the issue and introduces
a warning.
Differential revision: https://reviews.llvm.org/D68086
llvm-svn: 373476
D68110 added --arch-specific (supported by GNU readelf) and made
--arm-attributes an alias for it. The tests were later migrated to use
--arch-specific.
Note, llvm-readelf --arch-specific currently just uses llvm-readobj
style output for ARM attributes. The readelf-style output is not
implemented.
Reviewed By: compnerd, kongyi, rupprecht
Differential Revision: https://reviews.llvm.org/D68196
llvm-svn: 373291
This is for compatibility with GNU readobj. --arm-attributes option is
left as a hidden alias due to large number of tests using it.
Differential Revision: https://reviews.llvm.org/D68110
llvm-svn: 373125
I started this patch as a refactoring, tried to make a helper for
getting symbol names, similar to how we get section names
used in warning messages.
So this patch cleanups the code and fixes an issue: symbol names
in warning messages were not demangled.
Differential revision: https://reviews.llvm.org/D68012
llvm-svn: 372867
The crash might happen when we have either a broken or unsupported object
and trying to resolve relocations when dumping the .stack_sizes section.
For the test case I used a 32-bits ELF header and a 64-bit relocation.
In this case a null pointer is returned by the code instead of the relocation
resolver function and then we crash.
Differential revision: https://reviews.llvm.org/D67962
llvm-svn: 372838
llvm-readobj currently handles .stack_sizes.* (e.g. .stack_sizes.foo)
as a normal stack sizes section. Though MC does not produce sections with
such names. Also, linkers do not combine .stack_sizes.* into .stack_sizes.
A mini discussion about this correctness issue is here: https://reviews.llvm.org/D67757#inline-609274
This patch changes implementation so that only now only '.stack_sizes' name is
accepted as a real stack sizes section.
Differential revision: https://reviews.llvm.org/D67824
llvm-svn: 372578
The new constructor can simplify some llvm-readobj call sites.
Reviewed By: grimar, dblaikie
Differential Revision: https://reviews.llvm.org/D67797
llvm-svn: 372473
Before this patch we gave a priority to a dynamic table found
from the section header.
It was discussed (here: https://reviews.llvm.org/D67078?id=218356#inline-602082)
that probably preferring the table from PT_DYNAMIC is better,
because it is what runtime loader sees.
This patch makes the table from PT_DYNAMIC be chosen at first place if it is available.
But also it adds logic to fall back to SHT_DYNAMIC if the table from the dynamic segment is
broken or fall back to use no table if both are broken.
It adds a few more diagnostic warnings for the logic above.
Differential revision: https://reviews.llvm.org/D67547
llvm-svn: 372122
It's a straightforward refactoring that allows to simplify and encapsulate the code.
Differential revision: https://reviews.llvm.org/D67624
llvm-svn: 372083
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=40785.
llvm-readelf does not print the st_value of the symbol when
st_value has any non-visibility bits set.
This patch:
* Aligns "Ndx" row for the default and a new cases.
(it was 1 space character off for the case when "PROTECTED" visibility was printed)
* Prints "[<other>: 0x??]" for symbols which has an additional st_other bits set.
In compare with GNU, this logic is a bit simpler and seems to be more consistent.
For MIPS GNU can print named flags, though can't print a mix of them:
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 NOTYPE GLOBAL DEFAULT [OPTIONAL] UND a1
2: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS PLT] UND a2
3: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS PIC] UND a3
4: 00000000 0 NOTYPE GLOBAL DEFAULT [MICROMIPS] UND a4
5: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS16] UND a5
6: 00000000 0 NOTYPE GLOBAL DEFAULT [<other>: c] UND b1
7: 00000000 0 NOTYPE GLOBAL DEFAULT [<other>: 28] UND b2
On PPC64 it can print a localentry value that is encoded in the high bits of st_other
63: 0000000000000850 208 FUNC GLOBAL DEFAULT [<localentry>: 8] 12
We chose to print the raw st_other field, prefixed with '0x'.
Differential revision: https://reviews.llvm.org/D67094
llvm-svn: 371201
See http://lists.llvm.org/pipermail/llvm-dev/2019-February/130583.html
and D60242 for the lld partition feature.
This patch:
* Teaches yaml2obj to parse the 3 section types.
* Teaches llvm-readobj/llvm-readelf to dump the 3 section types.
There is no test for SHT_LLVM_DEPENDENT_LIBRARIES in llvm-readobj. Add
it as well.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D67228
llvm-svn: 371157
D62179 introduced a regression. llvm-readelf lose the ability to dump the dynamic symbols
when there is .dynamic section with a DT_SYMTAB, but there are no program headers:
https://reviews.llvm.org/D62179#1652778
Below is a program flow before the D62179 change:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => don't try to parse it.
3) Print dynamic symbols using information about them found on step (1).
And after the change it became:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => find SHT_DYNAMIC.
3) Parse dynamic table, but fail to handle the DT_SYMTAB because of the absence of the PT_LOAD. Report the "Virtual address is not in any segment" error.
This patch fixes the issue. For doing this it checks that the value of DT_SYMTAB was
mapped to a segment. If not - it ignores it.
Differential revision: https://reviews.llvm.org/D67078
llvm-svn: 371071
This allows llvm-readobj to print the contents of each resource
when printing resources from an object file or executable, like it
already does for plain .res files.
This requires providing the whole COFFObjectFile to ResourceSectionRef.
This supports both object files and executables. For executables,
the DataRVA field is used as is to look up the right section.
For object files, ideally we would need to complete linking of them
and fix up all relocations to know what the DataRVA field would end up
being. In practice, the only thing that makes sense for an RVA field
is an ADDR32NB relocation. Thus, find a relocation pointing at this
field, verify that it has the expected type, locate the symbol it
points at, look up the section the symbol points at, and read from the
right offset in that section.
This works both for GNU windres object files (which use one single
.rsrc section, with all relocations against the base of the .rsrc
section, with the original value of the DataRVA field being the
offset of the data from the beginning of the .rsrc section) and
cvtres object files (with two separate .rsrc$01 and .rsrc$02 sections,
and one symbol per data entry, with the original pre-relocated DataRVA
field being set to zero).
Differential Revision: https://reviews.llvm.org/D66820
llvm-svn: 370433
Add an WASM_SYMBOL_NO_STRIP flag, so that __attribute__((used)) doesn't
need to imply exporting. When targeting Emscripten, have
WASM_SYMBOL_NO_STRIP imply exporting.
Differential Revision: https://reviews.llvm.org/D62542
llvm-svn: 370415
When we have a dynamic relocation with a broken symbol's st_name,
tools report a useless error: "Invalid data was encountered while parsing the file".
After this change we report a warning + "<corrupt>" as a symbol name.
Differential revision: https://reviews.llvm.org/D66734
llvm-svn: 370330
Instead of blindly incrementing pointers in llvm-readobj, use this
helper, which does bounds checking against the available section
data.
Differential Revision: https://reviews.llvm.org/D66818
llvm-svn: 370310
Summary:
This patch implements main entry and auxiliary entries of symbol table generation for llvm-readobj on AIX.
The source code of aix_xcoff_xlc_test8.o (compile with xlc) is:
-bash-4.2$ cat test8.c
extern int i;
extern int TestforXcoff;
extern int fun(int i);
static int static_i;
char* p="abcd";
int fun1(int j) {
static_i++;
j++;
j=j+*p;
return j;
}
int main() {
i++;
fun(i);
return fun1(i);
}
Patch provided by DiggerLin
Differential Revision: https://reviews.llvm.org/D65240
llvm-svn: 370097
We do not need it, std::error_code is used mostly for COFF and
this patch rewrites the calls to use a different overload.
Having reportError(std::error_code EC, ... is excessive by itself,
because API that use error codes actually needs refactoring to
use Error/Expected<> instead.
DIfferential revision: https://reviews.llvm.org/D66521
llvm-svn: 369630
Summary:
Currently, we report:
error: ...
Prepend argv[0] (tool name):
llvm-readobj: error: ...
This is consistent with most GNU binutils/clang/lld, and gives a bit
more context in a long build log.
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D66425
llvm-svn: 369377
There are 4 methods that return std::error_code now,
though they do not have to because they are always succeed.
I refactored them.
This allows to simplify the code in tools a bit.
llvm-svn: 369263
Fix: Add a `consumeError` call removed by mistake to 'printStackSize',
this should fix the "Expected<T> must be checked before access or destruction." reported by following bot:
http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/9743/steps/stage%201%20check/logs/stdio
Original commit message:
Currently we have the following functions for error reporting:
LLVM_ATTRIBUTE_NORETURN void reportError(Twine Msg);
void reportError(Error Err, StringRef Input);
void reportWarning(Twine Msg);
void reportWarning(StringRef Input, Error Err);
void warn(llvm::Error Err);
void error(std::error_code EC);
Problems are: naming is inconsistent, arguments order is inconsistent,
some of the functions looks excessive.
After applying this patch we have:
void reportError(Error Err, StringRef Input);
void reportError(std::error_code EC, StringRef Input);
void reportWarning(Error Err, StringRef Input);
I'd be happy to remove reportError(std::error_code EC, StringRef Input) too, but it
is used by COFF heavily.
Test cases were updated, they show an improvement introduced.
Differential revision: https://reviews.llvm.org/D66286
llvm-svn: 369194
Few BB failed with the following error:
Command Output (stderr):
--
/home/buildbots/ppc64be-clang-lnt-test/clang-ppc64be-lnt/llvm/test/tools/llvm-readobj/stack-sizes.test:263:19: error: BADSECTION-OUT: expected string not found in input
# BADSECTION-OUT: 8 ?
^
<stdin>:4:1: note: scanning from here
^
It doesn't reproduce on ubuntu/windows I have. Also, seems many of the bots
are happy too.
This slightly reorders the code to make fouts().flush() call earlier,
like it was before the r369191.
llvm-svn: 369192
urrently we have the following functions for error reporting:
--
LLVM_ATTRIBUTE_NORETURN void reportError(Twine Msg);
void reportError(Error Err, StringRef Input);
void reportWarning(Twine Msg);
void reportWarning(StringRef Input, Error Err);
void warn(llvm::Error Err);
void error(std::error_code EC);
---
Problems are: naming is inconsistent, arguments order is inconsistent,
some of the functions looks excessive.
After applying this patch we have:
---
LLVM_ATTRIBUTE_NORETURN void reportError(Error Err, StringRef Input);
LLVM_ATTRIBUTE_NORETURN void reportError(std::error_code EC, StringRef Input);
void reportWarning(Error Err, StringRef Input);
---
I'd be happy to remove reportError(std::error_code EC, StringRef Input) too, but it
is used by COFF heavily.
Test cases were updated, they show an improvement introduced.
Differential revision: https://reviews.llvm.org/D66286
llvm-svn: 369190
This addresses the issue introduced in r369169, we need to unwrap
the value first before we can check whether it's empty. This also
swaps the two branches to put the common path first which should
be NFC.
llvm-svn: 369177
This is useful when trying to read notes from stripped files and matches
the behavior of GNU readelf and eu-readelf.
Differential Revision: https://reviews.llvm.org/D66358
llvm-svn: 369169
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Changes: no changes. A fix for the clang code will be landed right on top.
Original commit message:
SectionRef::getName() returns std::error_code now.
Returning Expected<> instead has multiple benefits.
For example, it forces user to check the error returned.
Also Expected<> may keep a valuable string error message,
what is more useful than having a error code.
(Object\invalid.test was updated to show the new messages printed.)
This patch makes a change for all users to switch to Expected<> version.
Note: in a few places the error returned was ignored before my changes.
In such places I left them ignored. My intention was to convert the interface
used, and not to improve and/or the existent users in this patch.
(Though I think this is good idea for a follow-ups to revisit such places
and either remove consumeError calls or comment each of them to clarify why
it is OK to have them).
Differential revision: https://reviews.llvm.org/D66089
llvm-svn: 368826
SectionRef::getName() returns std::error_code now.
Returning Expected<> instead has multiple benefits.
For example, it forces user to check the error returned.
Also Expected<> may keep a valuable string error message,
what is more useful than having a error code.
(Object\invalid.test was updated to show the new messages printed.)
This patch makes a change for all users to switch to Expected<> version.
Note: in a few places the error returned was ignored before my changes.
In such places I left them ignored. My intention was to convert the interface
used, and not to improve and/or the existent users in this patch.
(Though I think this is good idea for a follow-ups to revisit such places
and either remove consumeError calls or comment each of them to clarify why
it is OK to have them).
Differential revision: https://reviews.llvm.org/D66089
llvm-svn: 368812
I am changing this to work around an issue that is being hit when
building with clang 3.8. Specifically, clang 3.8 requires that we have a user
defined default constructor for SectionRef for the default initialization of a
const SectionRef.
llvm-svn: 368758
Summary:
This patch implements two note parsers; one for NT_FILE coredumps, e.g.:
```
CORE 0x00000080 NT_FILE (mapped files)
Page size: 4096
Start End Page Offset
0x0000000000001000 0x0000000000002000 0x0000000000003000
/path/to/a.out
0x0000000000004000 0x0000000000005000 0x0000000000006000
/path/to/libc.so
0x0000000000007000 0x0000000000008000 0x0000000000009000
[stack]
```
(A more realistic example can be tested locally by creating a crashing program and running `llvm-readelf -n core`)
And also implements a raw hex dump for unknown descriptor data for unhandled descriptor types.
Reviewers: MaskRay, jhenderson, grimar, alexshap
Reviewed By: MaskRay, grimar
Subscribers: emaste, llvm-commits, labath
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65832
llvm-svn: 368698
This patch addresses two closely related bugs:
https://bugs.llvm.org/show_bug.cgi?id=42930 and
https://bugs.llvm.org/show_bug.cgi?id=42931.
GNU readelf prints the file name for every input unless there is only
one input and that input is not an archive. This patch adds the printing
for multiple inputs. A previous change did it for archives, but
introduced a regression with GNU compatibility for single-output
formatting, resulting in a spurious initial blank line. This is fixed in
this patch too.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D65953
llvm-svn: 368435
This is a bit strange method. It works like a unwrapOrError,
but named error. It does not report an Input name.
I removed it.
Differential revision: https://reviews.llvm.org/D66000
llvm-svn: 368430
This patch changes the code to use a modern unwrapOrError(StringRef Input, Expected<T> EO)
version that contains the input source name and removes the deprecated version.
Differential revision: https://reviews.llvm.org/D65946
llvm-svn: 368428
It is outdated. Using of Expected<> is preferred, also it does
not provide a way to report a file name.
I updated the code to use the modern version of unwrapOrError instead.
Differential revision: https://reviews.llvm.org/D65951
llvm-svn: 368410
Currently, we have a code duplication in llvm-readobj which was introduced in D63266.
The duplication was introduced to allow llvm-readobj to dump the partially
broken object. Methods in ELFFile<ELFT> perform a strict validation of the inputs,
what is itself good, but not for dumper tools, that might want to dump the information,
even if some pieces are broken/unexpected.
This patch introduces a warning handler which can be passed to ELFFile<ELFT> methods
and can allow skipping the non-critical errors when needed/possible.
For demonstration, I removed the duplication from llvm-readobj and implemented a warning using
the new custom warning handler. It also deduplicates the strings printed, making the output less verbose.
Differential revision: https://reviews.llvm.org/D65515
llvm-svn: 368260
readelf -n:
```
// "Data size" is not left justified
Owner Data size Description
GNU 0x00000010 NT_GNU_ABI_TAG (ABI version tag)
```
llvm-readelf -n (before):
```
// "Data size" column shifted by 1
Owner Data size Description
GNU 0x00000010 NT_GNU_ABI_TAG (ABI version tag)
```
llvm-readelf -n (after):
```
Owner Data size Description
GNU 0x00000010 NT_GNU_ABI_TAG (ABI version tag)
```
This change is made to reduce the diff with readelf -n, so that it is
slightly easier to check what features readelf implements but we don't.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D65847
llvm-svn: 368138
This updates all libraries and tools in LLVM Core to use 64-bit offsets
which directly or indirectly come to DataExtractor.
Differential Revision: https://reviews.llvm.org/D65638
llvm-svn: 368014
When e_shstrndx is broken, it is impossible to get a section name.
In this patch I improved the error message we show and
added tests for Object and for llvm-readelf/llvm-readobj
Message was changed in two places:
1) llvm-readelf/llvm-readobj previously used a code from Object/ELF.h,
now they have a modified version of it (it has less checks and allows
dumping broken things).
2) Code in Object/ELF.h is still used for generic cases.
Differential revision: https://reviews.llvm.org/D64714
llvm-svn: 366203
It does not make sence to stop dumping the object if the broken
dynamic section was found. In this patch I changed the behavior from
"report an error" to "report a warning". This matches GNU.
Differential revision: https://reviews.llvm.org/D64472
llvm-svn: 365762
Adds a readobj dumper for 32-bit and 64-bit section header tables, and extend
support for the file-header dumping to include 64-bit object files. Also
refactors the binary file parsing to be done in a helper function in an attempt
to cleanup error handeling.
Differential Revision: https://reviews.llvm.org/D63843
llvm-svn: 365524
Many LLVM-based tools already support response files (i.e. files
containing a list of options, specified with '@'). This change simply
updates the documentation and help text for some of these tools to
include it. I haven't attempted to fix all tools, just a selection that
I am interested in.
I've taken the opportunity to add some tests for --help behaviour, where
they were missing. We could expand these tests, but I don't think that's
within scope of this patch.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42233 and
https://bugs.llvm.org/show_bug.cgi?id=42236.
Reviewed by: grimar, MaskRay, jkorous
Differential Revision: https://reviews.llvm.org/D63597
llvm-svn: 364036
Some versions of the Visual C++ 2015 runtime have line tables with the
subsection kind of 0x800000F2. In cvinfo.h, 0x80000000 is documented to
be DEBUG_S_IGNORE. This appears to implement the intended behavior.
llvm-svn: 363724
1) `-x foo` currently dumps one `foo`. This change makes it dump all `foo`.
2) `-x foo -x foo` currently dumps `foo` twice. This change makes it dump `foo` once.
In addition, if foo has section index 9, `-x foo -x 9` dumps `foo` once.
3) Give a warning instead of an error if `foo` does not exist.
The new behaviors match GNU readelf.
Also, print a new line as a separator between two section dumps.
GNU readelf uses two lines, but one seems good enough.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D63475
llvm-svn: 363683
If dynamic table is missing, output "dynamic strtab not found'. If the index is
out of range, output "Invalid Offset<..>".
https://bugs.llvm.org/show_bug.cgi?id=40807
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63084
Patch by Yuanfang Chen.
llvm-svn: 363374
Summary:
Use llvm::fouts() as the default stream for outputing. No new stream
should be constructed to output at the same time.
https://bugs.llvm.org/show_bug.cgi?id=42140
Reviewers: jhenderson, grimar, MaskRay, phosek, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63115
Patch by Yuanfang Chen!
llvm-svn: 363198
ELF for the 64-bit Arm Architecture defines two processor-specific dynamic
tags:
DT_AARCH64_BTI_PLT 0x70000001, d_val
DT_AARCH64_PAC_PLT 0x70000003, d_val
These presence of these tags indicate that PLT sequences have been
protected using Branch Target Identification and Pointer Authentication
respectively. The presence of both indicates that the PLT sequences have
been protected with both Branch Target Identification and Pointer
Authentication.
This patch adds the tags and tests for llvm-readobj and yaml2obj.
As some of the processor specific dynamic tags overlap, this patch splits
them up, keeping their original default value if they were not previously
mentioned explicitly in a switch case.
Differential Revision: https://reviews.llvm.org/D62596
llvm-svn: 362493
ELF for the 64-bit Arm Architecture defines a processor specific property
type GNU_PROPERTY_AARCH64_FEATURE_1_AND as GNU_PROPERTY_LOPROC. This
property works in a similar way to the existing X86 processor specific
property GNU_PROPERTY_GNU_X86_FEATURE_1_AND.
Two feature bits are defined for GNU_PROPERTY_AARCH64_FEATURE_1_AND:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI 0x1
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC 0x2
This patch defines the property, feature bits and implements support for
printing in llvm-readobj.
Differential Revision: https://reviews.llvm.org/D62595
llvm-svn: 362490
BB failed:
http://lab.llvm.org:8011/builders/clang-armv7-linux-build-cache/builds/15062/steps/build%20stage%201/logs/stdio
Error was:
/home/buildslave/buildslave/clang-armv7-linux-build-cache/llvm/tools/llvm-readobj/ELFDumper.cpp:3540:7:
error: non-constant-expression cannot be narrowed from type 'llvm::support::detail::packed_endian_specific_integral<unsigned long long,
llvm::support::endianness::little, 1>::value_type' (aka 'unsigned long long') to 'size_t' (aka 'unsigned int') in initializer list [-Wc++11-narrowing]
StrTabSec->sh_size};
llvm-svn: 362084
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361943
This is how multi-partition combined output files are going to look. If we
see multiple sections, the tools will just read the first one.
Differential Revision: https://reviews.llvm.org/D62349
llvm-svn: 361869
Summary:
This patch implement parsing symbol table for xcoffobjfile and
output as yaml format. Parsing auxiliary entries of a symbol
will be in a separate patch.
The XCOFF object file (aix_xcoff.o) used in the test comes from
-bash-4.2$ cat test.c
extern int i;
extern int TestforXcoff;
int main()
{
i++;
TestforXcoff--;
}
Patch by DiggerLin
Reviewers: sfertile, hubert.reinterpretcast, MaskRay, daltenty
Differential Revision: https://reviews.llvm.org/D61532
llvm-svn: 361832
They were failing on 32-bit Windows. In the cases where I've changed
test expectations, I've checked that they match the output of GNU
readelf.
llvm-svn: 361807
GNU readelf tool prints slightly different dynamic table "header" and
surrounds dynamic tag names by brackets. This patch implements the same
formatting for GNU-style output of the `llvm-readobj`.
LLVM
```
DynamicSection [ (13 entries)
Tag Type Name/Value
0x00000006 SYMTAB 0x168
...
]
```
GNU
```
Dynamic section at offset 0x1d0 contains 13 entries:
Tag Type Name/Value
0x00000006 (SYMTAB) 0x168
...
```
Differential Revision: https://reviews.llvm.org/D62256
llvm-svn: 361633
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361630
This is a result of what I found during my work on https://bugs.llvm.org/show_bug.cgi?id=41679.
Previously LLVM readelf took the information about .dynamic section
from its PT_DYNAMIC segment only. GNU tools have a bit different logic.
They also use the information from the .dynamic section header if it is available.
This patch changes the code to improve the compatibility with the GNU Binutils.
Differential revision: https://reviews.llvm.org/D61937
llvm-svn: 361165
This patch implements a limited form of autolinking primarily designed to allow
either the --dependent-library compiler option, or "comment lib" pragmas (
https://docs.microsoft.com/en-us/cpp/preprocessor/comment-c-cpp?view=vs-2017) in
C/C++ e.g. #pragma comment(lib, "foo"), to cause an ELF linker to automatically
add the specified library to the link when processing the input file generated
by the compiler.
Currently this extension is unique to LLVM and LLD. However, care has been taken
to design this feature so that it could be supported by other ELF linkers.
The design goals were to provide:
- A simple linking model for developers to reason about.
- The ability to to override autolinking from the linker command line.
- Source code compatibility, where possible, with "comment lib" pragmas in other
environments (MSVC in particular).
Dependent library support is implemented differently for ELF platforms than on
the other platforms. Primarily this difference is that on ELF we pass the
dependent library specifiers directly to the linker without manipulating them.
This is in contrast to other platforms where they are mapped to a specific
linker option by the compiler. This difference is a result of the greater
variety of ELF linkers and the fact that ELF linkers tend to handle libraries in
a more complicated fashion than on other platforms. This forces us to defer
handling the specifiers to the linker.
In order to achieve a level of source code compatibility with other platforms
we have restricted this feature to work with libraries that meet the following
"reasonable" requirements:
1. There are no competing defined symbols in a given set of libraries, or
if they exist, the program owner doesn't care which is linked to their
program.
2. There may be circular dependencies between libraries.
The binary representation is a mergeable string section (SHF_MERGE,
SHF_STRINGS), called .deplibs, with custom type SHT_LLVM_DEPENDENT_LIBRARIES
(0x6fff4c04). The compiler forms this section by concatenating the arguments of
the "comment lib" pragmas and --dependent-library options in the order they are
encountered. Partial (-r, -Ur) links are handled by concatenating .deplibs
sections with the normal mergeable string section rules. As an example, #pragma
comment(lib, "foo") would result in:
.section ".deplibs","MS",@llvm_dependent_libraries,1
.asciz "foo"
For LTO, equivalent information to the contents of a the .deplibs section can be
retrieved by the LLD for bitcode input files.
LLD processes the dependent library specifiers in the following way:
1. Dependent libraries which are found from the specifiers in .deplibs sections
of relocatable object files are added when the linker decides to include that
file (which could itself be in a library) in the link. Dependent libraries
behave as if they were appended to the command line after all other options. As
a consequence the set of dependent libraries are searched last to resolve
symbols.
2. It is an error if a file cannot be found for a given specifier.
3. Any command line options in effect at the end of the command line parsing apply
to the dependent libraries, e.g. --whole-archive.
4. The linker tries to add a library or relocatable object file from each of the
strings in a .deplibs section by; first, handling the string as if it was
specified on the command line; second, by looking for the string in each of the
library search paths in turn; third, by looking for a lib<string>.a or
lib<string>.so (depending on the current mode of the linker) in each of the
library search paths.
5. A new command line option --no-dependent-libraries tells LLD to ignore the
dependent libraries.
Rationale for the above points:
1. Adding the dependent libraries last makes the process simple to understand
from a developers perspective. All linkers are able to implement this scheme.
2. Error-ing for libraries that are not found seems like better behavior than
failing the link during symbol resolution.
3. It seems useful for the user to be able to apply command line options which
will affect all of the dependent libraries. There is a potential problem of
surprise for developers, who might not realize that these options would apply
to these "invisible" input files; however, despite the potential for surprise,
this is easy for developers to reason about and gives developers the control
that they may require.
4. This algorithm takes into account all of the different ways that ELF linkers
find input files. The different search methods are tried by the linker in most
obvious to least obvious order.
5. I considered adding finer grained control over which dependent libraries were
ignored (e.g. MSVC has /nodefaultlib:<library>); however, I concluded that this
is not necessary: if finer control is required developers can fall back to using
the command line directly.
RFC thread: http://lists.llvm.org/pipermail/llvm-dev/2019-March/131004.html.
Differential Revision: https://reviews.llvm.org/D60274
llvm-svn: 360984
r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
In the r360676 "Apply clang format. NFC" I applied clang-format
for whole ELFDumper.cpp. It caused a little discussion,
one of the points mentioned was that previously nicely lined up
tables are not so nice now.
This patch reverts them.
llvm-svn: 360860
Patch adds support for dumping of file headers with llvm-readobj. XCOFF
object files are added to test dumping a well formed file, and dumping
both negative timestamps and negative symbol counts, both of which are
allowed in the XCOFF definition.
Differential Revision: https://reviews.llvm.org/D60878
llvm-svn: 359878
Summary:
It currently receives an output parameter and returns
std::error_code. Expected<StringRef> fits for this purpose perfectly.
Differential Revision: https://reviews.llvm.org/D61421
llvm-svn: 359774
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
For well-known type IDs, include the name of the type.
To not duplicate the ID->name map, make llvm-readobj call this new
function as well. It has slightly different output, so this also
requires updating a few tests.
Differential Revision: https://reviews.llvm.org/D61086
llvm-svn: 359153
This is a resubmission of a previous patch that caused test failures,
with the fixes for the relevant tests included.
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
llvm-svn: 358395
The size field of a location can be different for each entry, so it is useful to have this displayed in the output of llvm-readobj -stackmap. Below is an example of how the output would look:
Record ID: 2882400000, instruction offset: 16
3 locations:
#1: Constant 1, size: 8
#2: Constant 2, size: 8
#3: Constant 3, size: 8
0 live-outs: [ ]
Patch By: jacob.hughes@kcl.ac.uk (with heavy modification by me)
Differential Revision: https://reviews.llvm.org/D59169
llvm-svn: 358324
Summary:
This ensures that object files will continue to validate as
WebAssembly modules in the presence of bulk memory operations. Engines
that don't support bulk memory operations will not recognize the
DataCount section and will report validation errors, but that's ok
because object files aren't supposed to be run directly anyway.
Reviewers: aheejin, dschuff, sbc100
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60623
llvm-svn: 358315
The new value is taken from <mach/machine.h> in the MacOSX10.14 SDK from
Xcode 10.1. Update llvm-objdump and llvm-readobj accordingly.
Differential Revision: https://reviews.llvm.org/D58636
llvm-svn: 357945
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
Differential Revision: https://reviews.llvm.org/D59946
llvm-svn: 357772
Summary: Currently, `llvm-readobj` do not support GNU style dumper for symbol versioning sections. In this patch, I would like to implement dumper for `.gnu.version` section
Reviewers: jhenderson, rupprecht, grimar
Reviewed By: jhenderson, rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59877
llvm-svn: 357578
Summary: Support reading notes that don't have a standard note name.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59969
llvm-svn: 357271
The majority of the printRelocation and printDynamicRelocation functions
were identical. This patch factors this all out into a new function.
There are a couple of minor differences to do with printing of symbols
without names, but I think these are harmless, and in some cases a small
improvement.
Reviewed by: grimar, rupprecht, Higuoxing
Differential Revision: https://reviews.llvm.org/D59823
llvm-svn: 357246
Summary: When implementing `GNU style` dumper for `.gnu.version` section, we should find symbol version name by `vs_index`.
Reviewers: jhenderson, rupprecht
Reviewed By: rupprecht
Subscribers: arphaman, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59545
llvm-svn: 357164
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: jhenderson, rupprecht
Subscribers: ormris, dyung, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356881
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356764
Summary:
This commit introduces a new AMDGPUPALMetadata class that:
* is inside the AMDGPU target;
* keeps an in-memory representation of PAL metadata;
* provides a method to read the frontend-supplied metadata from LLVM IR;
* provides methods for the asm printer to set metadata items;
* provides methods to write the metadata as a binary blob to put in a
.note record or as an asm directive;
* provides a method to read the metadata as a binary blob from a .note
record.
Because llvm-readobj cannot call directly into a target, I had to remove
llvm-readobj's ability to dump PAL metadata, pending a resolution to
https://reviews.llvm.org/D52821
Differential Revision: https://reviews.llvm.org/D57027
Change-Id: I756dc830894fcb6850324cdcfa87c0120eb2cf64
llvm-svn: 356582
Summary:
MsgPackDocument is the lighter-weight replacement for MsgPackTypes. This
commit switches AMDGPU HSA metadata processing to use MsgPackDocument
instead of MsgPackTypes.
Differential Revision: https://reviews.llvm.org/D57024
Change-Id: I0751668013abe8c87db01db1170831a76079b3a6
llvm-svn: 356081
Specifically, compute and Print Type and Section columns.
This is a re-commit of rL354833, after fixing the Asan problem found a a buildbot.
Differential Revision: https://reviews.llvm.org/D59060
llvm-svn: 355742
llvm-readelf prints relocation addends as:
<symbol value>[+-]<absolute addend>
where [+-] is determined from whether addend is less than zero or not.
However, it does not print the +/- if there is no symbol, which meant
that negative addends became their positive value with no indication
that this had happened. This patch stops the absolute conversion when
addends are negative and there is no associated symbol.
Reviewed by: Higuoxing, mattd, MaskRay
Differential Revision: https://reviews.llvm.org/D59095
llvm-svn: 355696
Summary:
This patch will obtain the section name for symbols that refer to a section. Prior to this patch the Name field for STT_SECTIONs was blank, now it is populated.
Before:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
With this patch:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1 .text
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3 .data
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4 .bss
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
This fixes PR40788
Reviewers: jhenderson, rupprecht, espindola
Reviewed By: rupprecht
Subscribers: emaste, javed.absar, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58796
llvm-svn: 355207
This patch allows all forms of values for options to be used at the end
of a group. With the fix, it is possible to follow the way GNU binutils
tools handle grouping options better. For example, the -j option can be
used with objdump in any of the following ways:
$ objdump -d -j .text a.o
$ objdump -d -j.text a.o
$ objdump -dj .text a.o
$ objdump -dj.text a.o
Differential Revision: https://reviews.llvm.org/D58711
llvm-svn: 355185
There's no reason to limit the DWARF CFI dumper to EM_386 and EM_X86_64;
ELF files could contain DWARF CFI on almost any platform (even 32-bit ARM;
NetBSD uses DWARF CFI on that platform). So start using the DWARF CFI dumper
unconditionally so that we can dump .eh_frame sections on the remaining ELF
platforms as well as in NetBSD binaries.
Differential Revision: https://reviews.llvm.org/D58761
llvm-svn: 355151
This is https://bugs.llvm.org/show_bug.cgi?id=40861,
Previously llvm-readobj would print the DT_NULL sometimes
for the dynamic section that has no terminator entry.
The logic of printDynamicTable was a bit overcomplicated.
I rewrote it slightly to fix the issue and commented.
Differential revision: https://reviews.llvm.org/D58716
llvm-svn: 355073
Summary:
This patch displays a hexadecimal section value (Elf_Shdr::sh_type) or section-relative offset when printing unknown sections.
Here is a subset of the output (ignoring the fields following "Type" when dumping an ELF's GNU `--section-headers` table).
Section Headers:
```
[Nr] Name Type
[16] android_rel LOOS+0x1
[17] android_rela LOOS+0x2
[27] unknown 0x1000: <unknown>
[28] loos LOOS+0
[30] hios VERSYM
[31] loproc LOPROC+0
[33] hiproc LOPROC+0xFFFFFFF
[34] louser LOUSER+0
[36] hiuser LOUSER+0x7FFFFFFF
```
As a comparison, the previous output looked something like the above, but with a blank "Type" field:
```
[Nr] Name Type
[27] unknown
[28] loos
[30] hios VERSYM
[31] loproc
[33] hiproc
[34] louser
[36] hiuser
```
This fixes PR40773
Reviewers: jhenderson, rupprecht, Bigcheese
Reviewed By: jhenderson, rupprecht, Bigcheese
Subscribers: MaskRay, Bigcheese, srhines, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58701
llvm-svn: 355014
llvm-readobj's error messages were broken for bad archive members. This
patch fixes them, and also adds testing for archive and thin archive
handling within llvm-readobj.
Reviewed by: rupprecht, grimar, higuoxing
Differential Revision: https://reviews.llvm.org/D58681
llvm-svn: 354960
Summary:
This is to be consistent with the display of other MIPS section types.
This string is also used by binutils-gdb/binutils/readelf.c:get_mips_section_type_name
Since we are here, reorder the two enum constatns because SHT_MIPS_DWARF < SHT_MIPS_ABIFLAGS.
Reviewers: jhenderson, atanasyan
Reviewed By: jhenderson
Subscribers: aprantl, sdardis, arichardson, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58496
llvm-svn: 354571
Add a flag to allow symbols to have a wasm import name which differs from the
linker symbol name, allowing the linker to link code using the import_module
attribute.
This is the MC/Object portion of the patch.
Differential Revision: https://reviews.llvm.org/D57632
llvm-svn: 353474
When type streams with forward references were merged using GHashes, cycles
were introduced in the debug info. This was caused by
GlobalTypeTableBuilder::insertRecordAs() not inserting the record on the second
pass, thus yielding an empty ArrayRef at that record slot. Later on, upon PDB
emission, TpiStreamBuilder::commit() would skip that empty record, thus
offseting all indices that came after in the stream.
This solution comes in two steps:
1. Fix the hash calculation, by doing a multiple-step resolution, iff there are
forward references in the input stream.
2. Fix merge by resolving with multiple passes, therefore moving records with
forward references at the end of the stream.
This patch also adds support for llvm-readoj --codeview-ghash.
Finally, fix dumpCodeViewMergedTypes() which previously could reference deleted
memory.
Fixes PR40221
Differential Revision: https://reviews.llvm.org/D57790
llvm-svn: 353412
Summary:
The following patch adds the "None" line to the section to segment mapping dump.
That line lists the sections that do not belong to any segment.
I realize that this change differs from GNU readelf which does not display the latter information.
I'd rather not add this "feature" under a command line option. I think that might introduce confusion, since users would have to
make an additional decision as to if they want to see all of the section-to-segment map or just a subset of it.
Another option is to only print the "None" line if the `--section-mapping` option is passed; however,
that might also introduce some confusion, because the section-to-segment map would be different between`--program-headers`
and the `--section-mapping` output. While the difference is just the "None" line, it seems that if we choose to display
the segment-to-section mapping, then we should always display the whole map including the sections
that do not belong to segments.
```
Section to Segment mapping:
Segment Sections...
00
01 .interp
02 .interp .note.ABI-tag .gnu.hash
03 .init_array .fini_array .dynamic
04 .dynamic
05 .note.ABI-tag
06 .eh_frame_hdr
07
08 .init_array .fini_array .dynamic .got
None .comment .symtab .strtab .shstrtab <--- THIS LINE
```
Reviewers: grimar, rupprecht, jhenderson, espindola
Reviewed By: rupprecht
Subscribers: khemant, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57700
llvm-svn: 353217
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
Summary:
The following patch introduces a new function `printSectionMapping` which is responsible for dumping just the section-to-segment mapping.
This patch also introduces a n option `-section-mapping` that outputs that mapping without the program headers.
Previously, this functionality was controlled by `printProgramHeaders`, and the output from `-program-headers` has not been changed. I am happy to change the option name, I copied the name that was displayed when outputting the mapping table.
Reviewers: khemant, jhenderson, grimar, rupprecht
Reviewed By: jhenderson, grimar, rupprecht
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57365
llvm-svn: 352896
We have a Field struct which has a StringRef member Str.
The code needs to create and keep alive the temporarily
std::string variables because of that.
That is not convenient and makes the code be more complicated
than it could be.
There seems to be no reason to keep Str be StringRef.
The patch changes it to be std::string and
rearranges the code around slightly.
Differential revision: https://reviews.llvm.org/D57447
llvm-svn: 352623
In r287786, a bug was introduced into llvm-readelf where it didn't print
the static symbol table if both --symbols and --dyn-symbols were
specified, even if there was no dynamic symbol table. This is obviously
incorrect.
This patch fixes this issue, by delegating the decision of which symbol
tables should be printed to the final dumper, rather than trying to
decide in the command-line option handling layer. The decision was made
to follow the approach taken in this patch because the LLVM style dumper
uses a different order to the original GNU style behaviour (and GNU
readelf) for ELF output. Other approaches resulted in behaviour changes
for other dumpers which felt wrong. In particular, I wanted to avoid
changing the order of the output for --symbols --dyn-symbols for LLVM
style, keep what is emitted by --symbols unchanged for all dumpers, and
avoid having different orders of .dynsym and .symtab dumping for GNU
"--symbols" and "--symbols --dyn-symbols".
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D57016
llvm-svn: 351960
In r287786, the behaviour of --dyn-symbols in llvm-readelf (but not
llvm-readobj) was changed to print the dynamic symbols as derived from
the hash table, rather than to print the dynamic symbol table contents
directly. The original change was initially submitted without review,
and some comments were made on the commit mailing list implying that the
new behavious is GNU compatible. I argue that it is not:
1) It does not include a null symbol.
2) It prints the symbols based on an order derived from the hash
table.
3) It prints an extra column indicating which bucket it came from.
This could break parsers that expect a fixed number of columns,
with the first column being the symbol index.
4) If the input happens to have both .hash and .gnu.hash section, it
prints interpretations of them both, resulting in most symbols
being printed twice.
5) There is no way of just printing the raw dynamic symbol table,
because --symbols also prints the static symbol table.
This patch reverts the --dyn-symbols behaviour back to its old behaviour
of just printing the contents of the dynamic symbol table, similar to
what is printed by --symbols. As the hashed interpretation is still
desirable to validate the hash table, it puts it under a new switch
"--hash-symbols". This is a no-op on all output forms except for GNU
output style for ELF. If there is no hash table, it does nothing,
unlike the previous behaviour which printed the raw dynamic symbol
table, since the raw dynsym is available under --dyn-symbols.
The yaml input for the test is based on that in
test/tools/llvm-readobj/demangle.test, but stripped down to the bare
minimum to provide a valid dynamic symbol.
Note: some LLD tests needed updating. I will commit a separate patch for
those.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56910
llvm-svn: 351789
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Georgii Rymar