EXTRACT_SUBVECTOR indices are always constant, we don't need to check for ConstantSDNode, we should just use getConstantOperandVal which will assert for the constant.
Instead of returning a bool to indicate success and a separate
SDValue, return the SDValue and have the callers check if it is
null.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112331
(i8 X ^ 128) & (i8 X s>> 7) --> usubsat X, 128
I haven't found a generalization of this identity:
https://alive2.llvm.org/ce/z/_sriEQ
Note: I was actually looking at the first form of the pattern in that link,
but that's part of a long chain of potential missed transforms in codegen
and IR....that I hope ends here!
The predicates for when this is profitable are a bit tricky. This version of
the patch excludes multi-use but includes custom lowering (as opposed to
legal only).
On x86 for example, we have custom lowering for some vector types, and that
uses umax and sub. So to enable that fold, we need add use checks to avoid
regressions. Even with legal-only lowering, we could see code with extra
reg move instructions for extra uses, so that constraint would have to be
eased very carefully to avoid penalties.
Differential Revision: https://reviews.llvm.org/D112085
With unoptimized code, we may see lots of stores and spend too much time in mergeTruncStores.
Fixes PR51827.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D111596
Inspired by D111968, provide a isNegatedPowerOf2() wrapper instead of obfuscating code with (-Value).isPowerOf2() patterns, which I'm sure are likely avenues for typos.....
Differential Revision: https://reviews.llvm.org/D111998
This is NFC-intended for the callers. Posting in case there are
other potential users that I missed.
I would also use this from VectorCombine in a patch for:
https://llvm.org/PR52178 ( D111901 )
Differential Revision: https://reviews.llvm.org/D111891
We were previously silently generating incorrect code when extracting a
fixed-width vector from a scalable vector. This is worse than crashing,
since the user will have no indication that this is currently unsupported
behaviour. I have fixed the code to only perform DAG combines when safe
to do so, i.e. the input and output vectors are both fixed-width or
both scalable.
Test added here:
CodeGen/AArch64/sve-extract-scalable-vector.ll
Differential revision: https://reviews.llvm.org/D110624
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
One of the cases identified in PR45116 - we don't need to limit extracted loads to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
I've also cleaned up the alignment calculation code - if we have a constant extraction index then the alignment can be based on an offset from the original vector load alignment, but for non-constant indices we should assume the worst (single element alignment only).
Differential Revision: https://reviews.llvm.org/D110486
This patch adds a generic DAGCombine for vector-predicated (VP) nodes.
Those for which we can determine that no vector element is active can be
replaced by either undef or, for reductions, the start value.
This is tested rather trivially at the IR level, where it's possible
that we want to teach instcombine to perform this optimization.
However, we can also see the zero-evl case arise during SelectionDAG
legalization, when wide VP operations can be split into two and the
upper operation emerges as trivially false.
It's possible that we could perform this optimization "proactively"
(both on legal vectors and before splitting) and reduce the width of an
operation and insert it into a larger undef vector:
```
v8i32 vp_add x, y, mask, 4
->
v8i32 insert_subvector (v8i32 undef), (v4i32 vp_add xsub, ysub, mask, 4), i32 0
```
This is somewhat analogous to similar vector narrow/widening
optimizations, but it's unclear at this point whether that's beneficial
to do this for VP ops for any/all targets.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D109148
One of the cases identified in PR45116 - we don't need to limit store narrowing to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory access by checking allowsMisalignedMemoryAccesses as a fallback.
The fmul is a canonicalizing operation, and fneg is not so this would
break denormals that need flushing and also would not quiet signaling
nans. Fold to fsub instead, which is also canonicalizing.
This extends the custom lowering for extending loads on
fixed length vectors in SVE to support masked extending loads.
The existing tests for correct behaviour of masked extending loads
exhibit bad code generation due to the legalistaion of i1 vectors.
They have been left as-is and new tests have been added that do not
exhibit this behaviour.
Differential Revision: https://reviews.llvm.org/D108200
Soft deprecrate isNullValue/isAllOnesValue and update in tree
callers. This matches the changes to the APInt interface from
D109483.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D109535
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
Given a select_cc producing a constant and a invertion of the constant
for a comparison more than zero, we can produce an xor with ashr
instead, which produces smaller code. The ashr either sets all bits or
clear all bits depending on if the value is negative. This is then xor'd
with the constant to optionally negate the value.
https://alive2.llvm.org/ce/z/DTFaBZ
This includes a OneUseCheck on the Cmp, which seems to make thinks a
little worse and will be removed in a followup.
Differential Revision: https://reviews.llvm.org/D109149
The check for whether a rotate is possible occurs before the
memory legality checks for the integer type. So it's possible we
decide we can use a rotate, but then fail the legality checks. If
that happens we should not fall back to a vector type. This triggers
an assertion in the rotate handling when it finds a vector type
instead of an integer type.
In theory we could use a shufflevector in place of the rotate, but
right now I'd just like to fix the crash.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D108839
Without this change only the preferred fusion opcode is tested
when attempting to combine FMA operations.
If both FMA and FMAD are available then FMA ops formed prior to
legalization will not be merged post legalization as FMAD becomes
the preferred fusion opcode.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D108619
This is another bug exposed by https://llvm.org/PR51612
(and the one that triggered the initial assertion) in the report.
That example was suppressed with:
985b48f183
...but these would still crash because we created nodes
like UADDO without the expected 2 output values.
There are 2 bugs here:
1. We were not checking uses of operand 2 (the false value of the select).
2. We were not checking for multiple uses of nodes that produce >1 result.
Correcting those is enough to avoid the crash in the reduced test based on:
https://llvm.org/PR51612
The additional use check on operand 0 (the condition value of the select)
should not strictly be necessary because we are only replacing one use
with another (whether it makes performance sense to do the transform with
that pattern is not clear). But as noted in the TODO, changing that
uncovers another bug.
Note: there's at least one more bug here - we aren't propagating EVTs
correctly, but I plan to fix that in another patch.
For ISD::EXTRACT_SUBVECTOR, its second operand must be a constant
multiple of the known-minimum vector length of the result type.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D107795
One of the cases identified in PR45116 - we don't need to limit load combines to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
One of the cases identified in PR45116 - we don't need to limit load combines (in this case for fp->int load/store copies) to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
Differential Revision: https://reviews.llvm.org/D108318
One of the cases identified in PR45116 - we don't need to limit load combines (in this case for ISD::BUILD_PAIR) to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
This helps in particular for 32-bit X86 cases loading 64-bit size data, reducing codegen diffs vs x86_64.
Differential Revision: https://reviews.llvm.org/D108307
Follow-up to D107068, attempt to fold nested concat_vectors/undefs, as long as both the vector and inner subvector types are legal.
This exposed the same issue in ARM's MVE LowerCONCAT_VECTORS_i1 (raised as PR51365) and AArch64's performConcatVectorsCombine which both assumed concat_vectors only took 2 subvector operands.
Differential Revision: https://reviews.llvm.org/D107597
visitEXTRACT_SUBVECTOR can sometimes create illegal BITCASTs when
removing "redundant" INSERT_SUBVECTOR operations. This patch adds
an extra check to ensure such combines only occur after operation
legalisation if any resulting BITBAST is itself legal.
Differential Revision: https://reviews.llvm.org/D108086
We don't have real demanded bits support for MULHU, but we can
still use the known bits based constant folding support at the end
of SimplifyDemandedBits to simplify a MULHU. This helps with cases
where we know the LHS and RHS have enough leading zeros so that
the high multiply result is always 0.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D106471
IR typically creates INSERT_SUBVECTOR patterns as a widening of the subvector with undefs to pad to the destination size, followed by a shuffle for the actual insertion - SelectionDAGBuilder has to do something similar for shuffles when source/destination vectors are different sizes.
This combine attempts to recognize these patterns by looking for a shuffle of a subvector (from a CONCAT_VECTORS) that starts at a modulo of its size into an otherwise identity shuffle of the base vector.
This uncovered a couple of target-specific issues as we haven't often created INSERT_SUBVECTOR nodes in generic code - aarch64 could only handle insertions into the bottom of undefs (i.e. a vector widening), and x86-avx512 vXi1 insertion wasn't keeping track of undef elements in the base vector.
Fixes PR50053
Differential Revision: https://reviews.llvm.org/D107068
This allows special constants like to 0 to be recognized. It's also
expected by isel patterns if a target had a mulh with immediate instructions.
The commuting done by tablegen won't commute patterns with immediates since it
expects DAGCombine to have done it.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D107486
We had some similar hasOneUse/isNON_EXTLoad early-outs spread out over different parts of the method - we should pull them all together.
Noticed while triaging PR45116
This transform was added with D58874, but there were no tests for overflow ops.
We need to change this one way or another because it can crash as shown in:
https://llvm.org/PR51238
Note that if there are no uses of an overflow op's bool overflow result, we
reduce it to a regular math op, so we continue to fold that case either way.
If we have uses of both the math and the overflow bool, then we are likely
not saving anything by creating an independent sub instruction as seen in
the test diffs here.
This patch makes the behavior in SDAG consistent with what we do in
instcombine AFAICT.
Differential Revision: https://reviews.llvm.org/D106983
This patch adds a peephole optimization `SETCC(FREEZE(x),const)` => `FREEZE(SETCC(x,const))`
if the SETCC is only used by BRCOND.
Combined with `BRCOND(FREEZE(X)) => BRCOND(X)`, this leads to a nice improvement in the generated assembly when x is a masked loaded value.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D105344
This patch builds on top of D106575 in which scalable-vector splats were
supported in `ISD::matchBinaryPredicate`. It teaches the DAGCombiner how
to perform a variety of the pre-existing saturating add/sub combines on
scalable-vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106652
This patch extends support for (scalable-vector) splats in the
DAGCombiner via the `ISD::matchBinaryPredicate` function, which enable a
variety of simple combines of constants.
Users of this function may now have to distinguish between
`BUILD_VECTOR` and `SPLAT_VECTOR` vector operands. The way of dealing
with this in-tree follows the approach added for
`ISD::matchUnaryPredicate` implemented in D94501.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106575
I've setup the basic framework for the isGuaranteedNotToBeUndefOrPoison call and updated DAGCombiner::visitFREEZE to use it, further Opcodes can be handled when we have test coverage.
I'm not aware of any vector test freeze coverage so the DemandedElts (and the Depth) args are not being used yet - but they are in place.
SelectionDAG::isGuaranteedNotToBePoison wrappers have also been added.
Differential Revision: https://reviews.llvm.org/D106668
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D104797
The existing rule about the operand type is strange. Instead, just say
the operand is a TargetConstant with the right width. (Legalization
ignores TargetConstants, so it doesn't matter if that width is legal.)
Highlights:
1. I had to substantially rewrite the AArch64 isel patterns to expect a
TargetConstant. Nothing too exotic, but maybe a little hairy. Maybe
worth considering a target-specific node with some dagcombines instead
of this complicated nest of isel patterns.
2. Our behavior on RV32 for vectors of i64 has changed slightly. In
particular, we correctly preserve the width of the arithmetic through
legalization. This changes the DAG a bit. Maybe room for
improvement here.
3. I explicitly defined the behavior around overflow. This is necessary
to make the DAGCombine transforms legal, and I don't think it causes any
practical issues.
Differential Revision: https://reviews.llvm.org/D105673
I'm going to extend the functionality started in D106058 so move the folds into their own method to reduce the amount of code in DAGCombiner::visitSELECT
Similar to the folds performed in InstCombinerImpl::foldSelectOpOp, this attempts to push a select further up to help merge a pair of binops.
I'm primarily interested in select(cond,add(x,y),add(x,z)) folds to help expose pointer math (see https://bugs.llvm.org/show_bug.cgi?id=51069 etc.) but I've tried to use the more generic isBinOp().
Differential Revision: https://reviews.llvm.org/D106058
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
We already have reassociation code for Adds and Ors separately in DAG
combiner, this adds it for the combination of the two where Ors act like
Adds. It reassociates (add (or (x, c), y) -> (add (add (x, y), c)) where
we know that the Ors operands have no common bits set, and the Or has
one use.
Differential Revision: https://reviews.llvm.org/D104765
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Differential Revision: https://reviews.llvm.org/D104797
This ports the AArch64 SABD and USBD over to DAG Combine, where they can be
used by more backends (notably MVE in a follow-up patch). The matching code
has changed very little, just to handle legal operations and types
differently. It selects from (ABS (SUB (EXTEND a), (EXTEND b))), producing
a ubds/abdu which is zexted to the original type.
Differential Revision: https://reviews.llvm.org/D91937
This add as a fold of sub(0, splat(sub(0, x))) -> splat(x). This can
come up in the lowering of right shifts under AArch64, where we generate
a shift left of a negated number.
Differential Revision: https://reviews.llvm.org/D103755
The is from discussion in https://reviews.llvm.org/D104247#inline-993387
The contract and reassoc flags shouldn't imply each other .
All the aggressive fsub fusion reassociate operations,
we should guard them with reassoc flag check.
Reviewed By: mcberg2017
Differential Revision: https://reviews.llvm.org/D104723
According to IR LangRef, the FMF flag:
contract
Allow floating-point contraction (e.g. fusing a multiply followed by an
addition into a fused multiply-and-add).
reassoc
Allow reassociation transformations for floating-point instructions.
This may dramatically change results in floating-point.
My understanding is that these two flags shouldn't imply each other,
as we might have a SDNode that can be reassociated with others, but
not contractble.
eg: We may want following fmul/fad/fsub to freely reassoc, but don't
want fma being generated here.
%F = fmul reassoc double %A, %B ; <double> [#uses=1]
%G = fmul reassoc double %C, %D ; <double> [#uses=1]
%H = fadd reassoc double %F, %G ; <double> [#uses=1]
%I = fsub reassoc double %H, %E ; <double> [#uses=1]
Before https://reviews.llvm.org/D45710, `reassoc` flag actually
did not imply isContratable either.
The current implementation also only check the flag in fadd node,
ignoring fmul node, this patch update that as well.
Reviewed By: spatel, qiucf
Differential Revision: https://reviews.llvm.org/D104247
6e5628354e regressed the Windows build as
the return type no longer matched in both branches for the return value
type deduction. This uses a bit more compiler magic to deal with that.
The sorting, obviously, must be stable, else we will have random assembly fluctuations.
Apparently there was no test coverage that would benefit from that,
so i've added one test.
The sorting consists of two parts - just sort the input vectors,
and recompute the shuffle mask -> input vector mapping.
I don't believe we need to do anything else.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D104187
When reducing vector builds to shuffles it possible that
the DAG combiner may try to extract invalid subvectors.
This happens as the existing code assumes vectors will be power
of 2 sizes, which is already untrue, but becomes more noticable
with v6 and v7 types.
Specifically the existing code assumes that half PowerOf2Ceil of
a given vector index will fit twice into a given vector.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D103880
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D95425
As shown in:
https://llvm.org/PR50623
...and the similar tests here, we were not accounting for
store merging of different sizes that do not cover the
entire range of the wide value to be stored.
This is the easy fix: just make sure that all of the
original stores are the same size, so when we calculate
the wide width, it's a simple N * M check.
This still allows all of the motivating optimizations from:
D86420 / 54a5dd485c
D87112 / 7a06b166b1
We could enhance this code to track individual bytes and
allow merging multiple sizes.
shuffle(concat(x,undef),concat(y,undef)) -> concat(shuffle(x,y),shuffle(x,y))
If the original shuffle references any of the upper (undef) subvector elements, ensure the split shuffle masks uses undef instead of an out-of-bounds value.
Fixes PR50609
This extends 434c8e013a and ede3982792 to handle signed
predicates by sign-extending the setcc operands.
This is not shown directly in https://llvm.org/PR50055 ,
but the pattern is visible by changing the unsigned convert
to signed in the source code.
This is a follow-up to D103280 that eases the use restrictions,
so we can handle the motivating case from:
https://llvm.org/PR50055
The loop code is adapted from similar use checks in
ExtendUsesToFormExtLoad() and SliceUpLoad(). I did not see an
easier way to filter out non-chain uses of load values.
Differential Revision: https://reviews.llvm.org/D103462
I accidentaly pushed a draft of D103280 that was discussed
during the review, but it was not supposed to be the final
version.
Rather than revert and recommit, I'm updating the existing
code. This way we have a record of the codegen diff that
would result if we decide to remove this predicate in the
future.
sext (vsetcc X, Y) --> vsetcc (zext X), (zext Y) --
(when the zexts are free and a bunch of other conditions)
We have a couple of similar folds to this already for vector selects,
but this pattern slips through because it is only a setcc.
The tests are based on the motivating case from:
https://llvm.org/PR50055
...but we need extra logic to get that example, so I've left that as
a TODO for now.
Differential Revision: https://reviews.llvm.org/D103280
extractelement is poison if the index is out-of-bounds, so just
scalarizing the load may introduce an out-of-bounds load, which is UB.
To avoid introducing new UB, we can mask the index so it only contains
valid indices.
Fixes PR50382.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D103077
DAGCombine's `mergeStoresOfConstantsOrVecElts` optimization is told
whether it's to use vector types and also whether it's to issue a
truncating store. However, the truncating store code path assumes a
scalar integer `ConstantSDNode`, and when using vector types it creates
either a `BUILD_VECTOR` or `CONCAT_VECTORS` to store: neither of which
is a constant.
The `riscv64` target is able to expose a crash here because it switches
on both code paths at the same time. The `f32` is stored as `i32` which
must be promoted to `i64`, necessitating a truncating store.
It also decides later that it prefers a vector store of `v2f32`.
While vector truncating stores are legal, this combine is not able to
emit them. We also don't have a test case. This patch adds an assert to
catch this case more gracefully, and updates one of the caller functions
to the function to turn off the use of truncating stores when preferring
vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103173
The select-of-constants transform was asserting that its constant vector
inputs did not implicitly truncate their input without that as an
explicit precondition to the function. This patch relaxes that assertion
into an early return to skip the optimization.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D102393
Fixes a bug in the DAG combiner that eliminates the stores because it missed
to inspect the address space of the pointers.
%v = load %ptr_as1
// no chain side effect
store %v, %ptr_as2
As well as
store %v, %ptr_as1
store %v, %ptr_as2
Fixes a test for above in X86.
Differential Revision: https://reviews.llvm.org/D102096
Expanding a fixed length operation involves wrapping the operation in an
insert/extract subvector pair, as such, when this is done to bitcast we
end up with an extract_subvector of a bitcast. DAGCombine tries to
convert this into a bitcast of an extract_subvector which restores the
initial fixed length bitcast, causing an infinite loop of legalization.
As part of this patch, we must make sure the above DAGCombine does not
trigger after legalization if the created bitcast would not be legal.
Differential Revision: https://reviews.llvm.org/D101990
This replaces D98479.
This allows type legalization to form SPLAT_VECTOR_PARTS so we don't
lose the splattedness when the scalar type is split.
I'm handling SPLAT_VECTOR_PARTS for fixed vectors separately so
we can continue using non-VL nodes for scalable vectors.
I limited to RV32+vXi64 because DAGCombiner::visitBUILD_VECTOR likes
to form SPLAT_VECTOR before seeing if it can replace the BUILD_VECTOR
with other operations. Especially interesting is a splat BUILD_VECTOR of
the extract_vector_elt which can become a splat shuffle, but won't if
we form SPLAT_VECTOR first. We either need to reorder visitBUILD_VECTOR
or add visitSPLAT_VECTOR.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100803
It is proper to relax non-negative limitation of step_vector.
Also this patch adds more combines for step_vector:
(sub X, step_vector(C)) -> (add X, step_vector(-C))
Differential Revision: https://reviews.llvm.org/D100812
This patch adds incrementally-better support for SPLAT_VECTOR in a
handful of vector combines by changing a few more
isBuildVectorAllOnes/isBuildVectorAllZeros to the equivalent
isConstantSplatVectorAllOnes/Zeros calls.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D100851
This patch changes ISD::isBuildVectorAllZeros to
ISD::isConstantSplatVectorAllZeros which handles zero sclar vector.
TestPlan: check-llvm
Differential Revision: https://reviews.llvm.org/D100813
When trying to clamp a constant index into a scalable vector we can
test if the index is less than the minimum number of elements in the
vector. If so, we can simply return the index because we know it is
guaranteed to fit inside the vector.
Differential Revision: https://reviews.llvm.org/D100639
Main reason is preparation to transform AliasResult to class that contains
offset for PartialAlias case.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D98027
If the inner shuffle already contains undef elements, then accept them in the merged shuffle as well.
This helps some X86 HADD/SUB patterns where slow targets were ending up with HADD/SUB because the (un)merged shuffles were stuck either side of the ADD/SUB - meaning we ended up with a total cost much higher than the "2*shuffle+add" that a slow target usually expands a HADD/SUB to.
This patch adds a new isIntOrFPConstant helper function to check if a
SDValue is a integer of FP constant. This pattern is used in various
places.
There also are places that incorrectly just check for integer constants,
e.g. D99384, so hopefully this helper will help people avoid that issue.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D99428
Don't bother calling ComputeNumSignBits if N00Bits < ExtVTBits. No
matter what answer we get back this will be true:
(N00Bits - DAG.ComputeNumSignBits(N00, DemandedSrcElts)) < ExtVTBits)
So we might as well save the computation. This makes the code more
consistent with the similar (sext_in_reg (sext x)) handling above.
As commented by @craig.topper on rG1ba5c550d418, we can't guarantee that we'll be extending zero bits, just sign bit. So, revert to the old code for zero_extend_vector_inreg cases.
Followup to D96345, handle unary shuffles of binops (as well as binary shuffles) if we can merge the shuffle with inner operand shuffles.
Differential Revision: https://reviews.llvm.org/D98646
Extend this to support ComputeNumSignBits of the (used) source vector elements so that we can handle more than just the case where we're sext_in_reg from the source element signbit.
Noticed while investigating the poor codegen in D98587.
Simon Pilgrim