PCH files don't have a module signature and LLVM uses a nonzero DWO id as
an indicator for skeleton / module CUs. This change pins the DWO id for PCH
files to a known constant value.
The correct long-term solution here is to implement a module signature
that is an actual dterministic hash (at the moment module signatures are
just random nonzero numbers) and then enable this for PCH files as well.
<rdar://problem/24290667>
llvm-svn: 258507
Volatile loads of type wider than a pointer get split by MSVC because
the base x86 ISA doesn't provide loads which are wider than pointer
width. LLVM assumes that it can emit an cmpxchg8b but this is
problematic if the memory is in a CONST memory segment.
Instead, provide behavior compatible with MSVC: split loads wider than a
pointer.
llvm-svn: 258506
If 'sections' directive has only one sub-section, the code for 'single'-based directive was emitted. Removed this codegen, because it causes crashes in different cases.
llvm-svn: 258495
Replace a string append operation in addFunctionMappingRecord with a
vector append. The existing behavior is quadratic in the worst case:
this patch makes it linear.
Differential Revision: http://reviews.llvm.org/D16395
llvm-svn: 258424
can be found in a module.
There are externally visible anonymous types that can be found:
typedef struct { } s; // I can be found via the typedef.
There are anonymous internal types that can be found:
namespace { struct s {}; } // I can be found by name.
rdar://problem/24199640
llvm-svn: 258272
until we are visiting their declcontext.
This fixes a regression introduced in r256962:
When building debug info for a typdef'd anonymous tag type, we would be
visiting the inner anonymous type first thus creating a "typedef changes
linkage of anonymous type, but linkage was already computed" error.
rdar://problem/24199640
llvm-svn: 258152
This is part of a new statistics gathering feature for the sanitizers.
See clang/docs/SanitizerStats.rst for further info and docs.
Differential Revision: http://reviews.llvm.org/D16175
llvm-svn: 257971
This attribute may be attached to a function definition and instructs the backend to generate appropriate function entry/exit code so that
it can be used directly as an interrupt handler.
The IRET instruction, instead of the RET instruction, is used to return from interrupt or exception handlers. All registers, except for the EFLAGS register which is restored by the IRET instruction, are preserved by the compiler.
Any interruptible-without-stack-switch code must be compiled with -mno-red-zone since interrupt handlers can and will, because of the hardware design, touch
the red zone.
interrupt handler must be declared with a mandatory pointer argument:
struct interrupt_frame;
__attribute__ ((interrupt))
void f (struct interrupt_frame *frame) {
...
}
and user must properly define the structure the pointer pointing to.
exception handler:
The exception handler is very similar to the interrupt handler with a different mandatory function signature:
#ifdef __x86_64__
typedef unsigned long long int uword_t;
#else
typedef unsigned int uword_t;
#endif
struct interrupt_frame;
__attribute__ ((interrupt))
void f (struct interrupt_frame *frame, uword_t error_code) {
...
}
and compiler pops the error code off stack before the IRET instruction.
The exception handler should only be used for exceptions which push an error code and all other exceptions must use the interrupt handler.
The system will crash if the wrong handler is used.
Differential Revision: http://reviews.llvm.org/D15709
llvm-svn: 257867
This commit is a follow-up to r251734, r251476, and r249735, which fixes
a bug where function attributes were not attached to thread local
wrapper functions.
rdar://problem/20828324
llvm-svn: 257865
Summary:
Previously we compiled CUDA device code to PTX assembly and embedded
that asm as text in our host binary. Now we compile to PTX assembly and
then invoke ptxas to assemble the PTX into a cubin file. We gather the
ptx and cubin files for each of our --cuda-gpu-archs and combine them
using fatbinary, and then embed that into the host binary.
Adds two new command-line flags, -Xcuda_ptxas and -Xcuda_fatbinary,
which pass args down to the external tools.
Reviewers: tra, echristo
Subscribers: cfe-commits, jhen
Differential Revision: http://reviews.llvm.org/D16082
llvm-svn: 257809
Proper diagnostic and resolution of mangled names' conflicts in variables.
When there is a declaration and a definition using the same name but different
types, we emit what is in the definition. When there are two conflicting
definitions, we issue an error.
Differential Revision: http://reviews.llvm.org/D15686
llvm-svn: 257754
In {CG,}ExprConstant.cpp, we weren't treating vector splats properly.
This patch makes us treat splats more properly.
Additionally, this patch adds a new cast kind which allows a bool->int
cast to result in -1 or 0, instead of 1 or 0 (for true and false,
respectively), so we can sanely model OpenCL bool->int casts in the AST.
Differential Revision: http://reviews.llvm.org/D14877
llvm-svn: 257559
Summary:
Support for OpenCL 2.0 pipe type.
This is a bug-fix version for bader's patch reviews.llvm.org/D14441
Reviewers: pekka.jaaskelainen, Anastasia
Subscribers: bader, Anastasia, cfe-commits
Differential Revision: http://reviews.llvm.org/D15603
llvm-svn: 257254
Clang got itself into the situation where we mangled the same
constructor twice with two different constructor types. After one of
the constructors were utilized, the tag used for one of the types
changed from class to struct because a class template became complete.
This resulted in one of the constructor types varying from the other
constructor.
Instead, force "base" constructor types to "complete" if the ABI doesn't
have constructor variants. This will ensure that GlobalDecls for both
variants will get the same mangled name.
This fixes PR26029.
llvm-svn: 257205
Due to the new in-place renaming support added in r257174, we no
longer need to invoke ThinLTO global renaming from clang. It will be
invoked on the module in the FunctionImport pass (by an immediately
following llvm commit).
As a result, we don't need to load the FunctionInfoIndex as early,
so that is moved down into EmitAssemblyHelper::EmitAssembly.
llvm-svn: 257179
Coverage mapping data may reference names of functions
that are skipped by FE (e.g, unused inline functions). Since
those functions are skipped, normal instr-prof function lowering
pass won't put those names in the right section, so special
handling is needed to walk through coverage mapping structure
and recollect the references.
With this patch, only names that are skipped are processed. This
simplifies the lowering code and it no longer needs to make
assumptions coverage mapping data layout. It should also be
more efficient.
llvm-svn: 257092
was visited and all decls have been merged.
We only get a single chance to emit the types for virtual classes because
CGDebugInfo::completeRequiredType() categorically doesn't complete them.
llvm-svn: 256962
This patch attempts to fix the regressions identified when the patch was committed initially.
Thanks to Michael Liao for identifying the fix in the offloading metadata generation
related with side effects in evaluation of function arguments.
llvm-svn: 256933
Summary:
In order to offloading work properly two things need to be in place:
- a descriptor with all the offloading information (device entry functions, and global variable) has to be created by the host and registered in the OpenMP offloading runtime library.
- all the device functions need to be emitted for the device and a convention has to be in place so that the runtime library can easily map the host ID of an entry point with the actual function in the device.
This patch adds support for these two things. However, only entry functions are being registered given that 'declare target' directive is not yet implemented.
About offloading descriptor:
The details of the descriptor are explained with more detail in http://goo.gl/L1rnKJ. Basically the descriptor will have fields that specify the number of devices, the pointers to where the device images begin and end (that will be defined by the linker), and also pointers to a the begin and end of table whose entries contain information about a specific entry point. Each entry has the type:
```
struct __tgt_offload_entry{
void *addr;
char *name;
int64_t size;
};
```
and will be implemented in a pre determined (ELF) section `.omp_offloading.entries` with 1-byte alignment, so that when all the objects are linked, the table is in that section with no padding in between entries (will be like a C array). The code generation ensures that all `__tgt_offload_entry` entries are emitted in the same order for both host and device so that the runtime can have the corresponding entries in both host and device in same index of the table, and efficiently implement the mapping.
The resulting descriptor is registered/unregistered with the runtime library using the calls `__tgt_register_lib` and `__tgt_unregister_lib`. The registration is implemented in a high priority global initializer so that the registration happens always before any initializer (that can potentially include target regions) is run.
The driver flag -omptargets= was created to specify a comma separated list of devices the user wants to support so that the new functionality can be exercised. Each device is specified with its triple.
About target codegen:
The target codegen is pretty much straightforward as it reuses completely the logic of the host version for the same target region. The tricky part is to identify the meaningful target regions in the device side. Unlike other programming models, like CUDA, there are no already outlined functions with attributes that mark what should be emitted or not. So, the information on what to emit is passed in the form of metadata in host bc file. This requires a new option to pass the host bc to the device frontend. Then everything is similar to what happens in CUDA: the global declarations emission is intercepted to check to see if it is an "interesting" declaration. The difference is that instead of checking an attribute, the metadata information in checked. Right now, there is only a form of metadata to pass information about the device entry points (target regions). A class `OffloadEntriesInfoManagerTy` was created to manage all the information and queries related with the metadata. The metadata looks like this:
```
!omp_offload.info = !{!0, !1, !2, !3, !4, !5, !6}
!0 = !{i32 0, i32 52, i32 77426347, !"_ZN2S12r1Ei", i32 479, i32 13, i32 4}
!1 = !{i32 0, i32 52, i32 77426347, !"_ZL7fstatici", i32 461, i32 11, i32 5}
!2 = !{i32 0, i32 52, i32 77426347, !"_Z9ftemplateIiET_i", i32 444, i32 11, i32 6}
!3 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 99, i32 11, i32 0}
!4 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 272, i32 11, i32 3}
!5 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 127, i32 11, i32 1}
!6 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 159, i32 11, i32 2}
```
The fields in each metadata entry are (in sequence):
Entry 1) an ID of the type of metadata - right now only zero is used meaning "OpenMP target region".
Entry 2) a unique ID of the device where the input source file that contain the target region lives.
Entry 3) a unique ID of the file where the input source file that contain the target region lives.
Entry 4) a mangled name of the function that encloses the target region.
Entries 5) and 6) line and column number where the target region was found.
Entry 7) is the order the entry was emitted.
Entry 2) and 3) are required to distinguish files that have the same function name.
Entry 4) is required to distinguish different instances of the same declaration (usually templated ones)
Entries 5) and 6) are required to distinguish the particular target region in body of the function (it is possible that a given target region is not an entry point - if clause can evaluate always to zero - and therefore we need to identify the "interesting" target regions. )
This patch replaces http://reviews.llvm.org/D12306.
Reviewers: ABataev, hfinkel, tra, rjmccall, sfantao
Subscribers: FBrygidyn, piotr.rak, Hahnfeld, cfe-commits
Differential Revision: http://reviews.llvm.org/D12614
llvm-svn: 256842
NFC. These hints are only used for inlining and the inliner now uses
the same criteria to identify hot and cold callees and set appropriate
thresholds without relying on these hints. Hence this removed code is
superfluous.
Differential Revision: http://reviews.llvm.org/D15726
llvm-svn: 256793
This is one last remaining instrumentatation related structure
that needs to be migrate to use the centralized template
definition. With this change, instrumentation code
related to coverage module header will be kept in sync
with the coverage mapping reader. The remaining code
which makes implicit assumption about covmap control
structure layout in the the lowering pass will cleaned
up in a different patch. This patch is not intended to
have no functional change.
llvm-svn: 256714
It was copying an EHCleanupStack::Cleanup object into a
SmallVector<char>, with a comment saying that SmallVector's alignment is
always large enough. Unfortunately, that isn't actually true after
r162331 in 2012.
Expand the code (somewhat distastefully) to get a stack allocation with
a correct alignment.
llvm-svn: 256619
This adds support for the MCU psABI in a way different from r251223 and r251224,
basically reverting most of these two patches. The problem with the approach
taken in r251223/4 is that it only handled libcalls that originated from the backend.
However, the mid-end also inserts quite a few libcalls and assumes these use the
platform's default calling convention.
The previous patch tried to insert inregs when necessary both in the FE and,
somewhat hackily, in the CG. Instead, we now define a new default calling convention
for the MCU, which doesn't use inreg marking at all, similarly to what x86-64 does.
Differential Revision: http://reviews.llvm.org/D15055
llvm-svn: 256495
OpenMP 4.5 adds 'depend(sink:vec)' in 'ordered' directive for doacross loop synchronization. Patch adds parsing and semantic analysis for this clause.
llvm-svn: 256330
OpenMP 4.5 adds 'depend(sink:vec)' in 'ordered' directive for doacross loop synchronization. Patch adds parsing and semantic analysis for this clause.
llvm-svn: 256238
The /Brepro flag controls whether or not the compiler should embed
timestamps into the object file. Object files which do not embed
timestamps are not suitable for incremental linking but are suitable for
hermetic build systems and staged self-hosts of clang.
A normal clang spelling of this flag has been added,
-mincremental-linker-compatible.
llvm-svn: 256204
When using blocks, a byref structure is created to represent the
closure. The "byref.layout" field of this structure is an i8*. However,
some 'inline' layouts are represented as i64's, not i8*'s.
Prior to r246985 we cast the i64 'inline' layout to an i8* before
assigning it into the byref structure. This patch brings the cast back
and adds a regression test.
The original version of this patch was too invasive. This version only adds the
cast to BuildByrefLayout.
Differential Revision: http://reviews.llvm.org/D15674
rdar://23713871
llvm-svn: 256190
When using blocks, a byref structure is created to represent the
closure. The "byref.layout" field of this structure is an i8*. However,
some 'inline' layouts are represented as i64's, not i8*'s.
Prior to r246985 we cast the i64 'inline' layout to an i8* before
assigning it into the byref structure. This patch brings the cast back
and adds a regression test.
rdar://23713871
llvm-svn: 256185
Reapplies r256063, except instead of frugally re-using an LLVM enum,
we define a Clang enum, to avoid exposing too much LLVM interface.
Differential Revision: http://reviews.llvm.org/D15650
llvm-svn: 256078
#pragma omp parallel needs an implicit barrier that is currently done by an explicit call to __kmpc_barrier. However, the runtime already ensures a barrier in __kmpc_fork_call which currently leads to two barriers per region per thread.
Differential Revision: http://reviews.llvm.org/D15561
llvm-svn: 255992
OpenMP codegen tried to emit the code for its constructs even if it was detected as a dead-code. Added checks to ensure that the code is emitted if the code is not dead.
llvm-svn: 255990
OpenMP 4.5 adds 'depend(source)' clause for 'ordered' directive to support cross-iteration dependence. Patch adds parsing and semantic analysis for this construct.
llvm-svn: 255986
This sets the maximum entry count among all functions in the program to the module using module flags. This allows the optimizer to use this information.
Differential Revision: http://reviews.llvm.org/D15163
llvm-svn: 255918
C++ emits vtables for classes that have key function present in the
current TU. While we compile CUDA the fact that key function was found
in this TU does not mean that we are going to generate code for it. E.g.
vtable for a class with host-only methods should not (and can not) be
generated on device side, because we'll never generate code for them
during device-side compilation.
This patch adds an extra CUDA-specific check during key method computation
and filters out potential key methods that are not suitable for this side
of CUDA compilation.
When we codegen vtable, entries for unsuitable methods are set to null.
Differential Revision: http://reviews.llvm.org/D15309
llvm-svn: 255911
Clang-side cross-DSO CFI.
* Adds a command line flag -f[no-]sanitize-cfi-cross-dso.
* Links a runtime library when enabled.
* Emits __cfi_slowpath calls is bitset test fails.
* Emits extra hash-based bitsets for external CFI checks.
* Sets a module flag to enable __cfi_check generation during LTO.
This mode does not yet support diagnostics.
llvm-svn: 255694
This updates clang to use bundle operands to associate an invoke with
the funclet which it is contained within.
Depends on D15517.
Differential Revision: http://reviews.llvm.org/D15518
llvm-svn: 255675
Clang doesn’t support a use of “this” pointer inside inline asm.
When I tried to compile a class or a struct (see example) with an inline asm that contains "this" pointer.
Clang returns with an error.
This patch fixes that.
error: expected unqualified-id
For example:
'''
struct A {
void f() {
__asm mov eax, this
// error: expected unqualified-id
}
};
'''
Differential Revision: http://reviews.llvm.org/D15115
llvm-svn: 255645
We'd like to remove support for terminatepad from LLVM. To do this, we
need to move Clang off of it first. The intent behind terminatepad was
to carefully model exception specifications for the MSVC personality.
However, we don't support exception specifications for the MSVC
personality and neither does MSVC. Instead, MSVC supports
all-or-nothing exception specifications. We can model this limited
usage using cleanuppads which call std::terminate.
Differential Revision: http://reviews.llvm.org/D15478
llvm-svn: 255521
This patch enables soft float support for ppc32 architecture and fixes
the ABI for variadic functions. This is the first in a set of patches
for soft float support in LLVM.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D13351
llvm-svn: 255515
This sets the maximum entry count among all functions in the program to the
module using module flags. This allows the optimizer to use this information.
Differential Revision: http://reviews.llvm.org/D15163
llvm-svn: 255397
For PS4, generate explicit import for anonymous namespaces and mark it by DW_AT_artificial attribute.
Differential Revision: http://reviews.llvm.org/D12624
llvm-svn: 255281
implicitly-concatenated string literals. When looking for the start of a token
in the inline assembly, start from the end of the previous token, not the start
of the entire string.
Patch by Yunlian Jiang!
llvm-svn: 255198
OpenMP 4.5 adds directives 'taskloop' and 'taskloop simd'. These directives support clause 'num_tasks'. Patch adds parsing/semantic analysis for this clause.
llvm-svn: 255008
Summary:
Adds new option -fthinlto-index=<file> to invoke the LTO pipeline
along with function importing via clang using the supplied function
summary index file. This supports invoking the parallel ThinLTO
backend processes in a distributed build environment via clang.
Additionally, this causes the module linker to be invoked on the bitcode
file being compiled to perform any necessary promotion and renaming of
locals that are exported via the function summary index file.
Add a couple tests that confirm we get expected errors when we try to
use the new option on a file that isn't bitcode, or specify an invalid
index file. The tests also confirm that we trigger the expected function
import pass.
Depends on D15024
Reviewers: joker.eph, dexonsmith
Subscribers: joker.eph, davidxl, cfe-commits
Differential Revision: http://reviews.llvm.org/D15025
llvm-svn: 254927
OpenMP 4.5 adds 'taksloop' and 'taskloop simd' directives, which have 'grainsize' clause. Patch adds parsing/sema analysis of this clause.
llvm-svn: 254903
OpenMP 4.5 adds 'taskloop' and 'taskloop simd' directives. These directives have new 'nogroup' clause. Patch adds basic parsing/sema support for this clause.
llvm-svn: 254899
Constructors and destructors may be represented by several functions
in IR. Only base structors correspond to source code, others are
small pieces of code and eventually call the base variant. In this
case instrumentation of non-base structors has little sense, this
fix remove it. Now profile data of a declaration corresponds to
exactly one function in IR, it agrees with the current logic of the
profile data loading.
This change fixes PR24996.
Differential Revision: http://reviews.llvm.org/D15158
llvm-svn: 254876
This reverts commit r254195.
From the description, I suspect that the wrong patch was committed here,
and this is causing assertion failures in EmitDeferred() when the global
value ends up being a bitcast of a global.
llvm-svn: 254823
After r251874, properties from class extensions no longer show up in
ObjCInterfaceDecl::properties(). Make debug info emission explicitly
look for properties in class extensions before looking at direct properties.
Also add a test that checks for this. There are three interesting cases:
1. A property is only declared in a class extension, and the @implementation
is in a different file. This used to generated a DIObjcProperty before
r251874 and does again with this fix.
2. A property is declared as readonly in the class itself and redeclared as
readwrite in a class extension. clang before r251874 put the DIObjcProperty
on the first declaration. clang after r251874 didn't emit any DIObjcProperty,
and clang with this fix puts it on the readwrite redeclaration (which is
what lookup finds). This seems like a progression.
3. Like 2, but with an @implementation in the same file. In this case,
the property debug info gets generated a second time through the ivar
from the definition. In this case, lookup and declaration code need
to agree on the line number so that the DIObjcProperty isn't emitted
twice. In this case, clang before r251874 emitted one DIObjcProperty
on the first declaration, clang with r251874 emitted one on the second
declaration, and clang with this patch still does the latter.
llvm-svn: 254750
Summary:
Looking into some recent issues with LLDBs expression parser highlighted that upstream clang passes vectors types differently to Android Open Source Project's clang for Arm Android targets.
This patch reflects the changes present in the AOSP and allows LLDB's JIT expression evaluation to work correctly for Arm Android targets when passing vectors.
This is submitted with consent of the original author Stephen Hines.
Reviewers: asl, rsmith, ADodds, rnk
Subscribers: rnk, aemerson, tberghammer, danalbert, srhines, cfe-commits, pirama
Differential Revision: http://reviews.llvm.org/D14639
llvm-svn: 254682
Fix calculating address of arguments larger than 32 bit on stack for
variadic functions (rounding up address to alignment) on ppc32 architecture.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D14871
llvm-svn: 254670
After, properties from class extensions no longer show up in
ObjCInterfaceDecl::properties(). Make ObjCCommonMac::EmitPropertyList()
explicitly look for properties in class extensions before looking at
direct properties.
Also add a test that passes both with clang before r251874 and after this
patch (but fails with r251874 and without this patch).
llvm-svn: 254622
`pass_object_size` is our way of enabling `__builtin_object_size` to
produce high quality results without requiring inlining to happen
everywhere.
A link to the design doc for this attribute is available at the
Differential review link below.
Differential Revision: http://reviews.llvm.org/D13263
llvm-svn: 254554
Summary:
This patch implements the 4.5 specification for the implicit data maps. OpenMP 4.5 specification changes the default way data is captured into a target region. All the non-aggregate kinds are passed by value by default. This required activating the capturing by value during SEMA for the target region. All the non-aggregate values that can be encoded in the size of a pointer are properly casted and forwarded to the runtime library. On top of fixing the previous weird behavior for mapping pointers in nested data regions (an explicit map was always required), this also improves performance as the number of allocations/transactions to the device per non-aggregate map are reduced from two to only one - instead of passing a reference and the value, only the value passed.
Explicit maps will be added later on once firstprivate, private, and map clauses' SEMA and parsing are available.
Reviewers: hfinkel, rjmccall, ABataev
Subscribers: cfe-commits, carlo.bertolli
Differential Revision: http://reviews.llvm.org/D14940
llvm-svn: 254521
OpenMP 4.5 defines new clause 'priority' for 'task', 'taskloop' and 'taskloop simd' directives. Added parsing and sema analysis for 'priority' clause in 'task' and 'taskloop' directives.
llvm-svn: 254398
Summary: This patch adds support for the interrupt attribute for mips32r2+.
Patch by Simon Dardis.
Reviewers: dsanders, aaron.ballman
Subscribers: aaron.ballman, cfe-commits
Differential Revision: http://reviews.llvm.org/D10802
llvm-svn: 254205
Summary: This patch adds support for the interrupt attribute for mips32r2+.
Reviewers: dsanders, aaron.ballman
Subscribers: aaron.ballman, cfe-commits
Differential Revision: http://reviews.llvm.org/D10802
llvm-svn: 254203
This patch changes the generation of CGFunctionInfo to contain
the FunctionProtoType if it is available. This enables the code
generation for call instructions to look into this type for
exception information and therefore generate better quality
IR - it will not create invoke instructions for functions that
are know not to throw.
llvm-svn: 253926
Runtime library requires, that codegen for 'depend' clause for 'out' dependency kind must be the same as codegen for 'depend' clause with 'inout' dependency.
llvm-svn: 253866
The pointer returned by __RTDynamicCast must be bitcasted. However, it
was not expected that __RTDynamicCast would be invoked, resulting in the
bitcast occuring in a different BasicBlock than the invoke. This caused
a down-stream PHI to get confused about which BasicBlock the incomming
value was from.
This fixes PR25606.
llvm-svn: 253843
driving a canonical difference between that and an unqualified
type is a really bad idea when both are valid. Instead, remember
that it was there in a non-canonical way, then look for that in
the one place we really care about it: block captures. The net
effect closely resembles the behavior of a decl attribute, except
still closely following ARC's standard qualifier parsing rules.
llvm-svn: 253534
to start at the offset of the first ivar instead of the rounded-up
end of the superclass. The latter could include a large amount of
tail padding because of a highly-aligned ivar, and subclass ivars
can be laid out within that.
llvm-svn: 253533
The conversion from QuantityType to the (temporary) IntegerAlignment class
was ambiguous.
For now add in explicit conversion to unsigned to satisfy the clang-x86_64-debian-fast bot.
I'll remove the explicit conversion when I remove the IntegerAlignment class.
llvm-svn: 253519
This is a follow on from a similar LLVM commit: r253511.
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
The only code change to clang is hidden in CGBuilder.h which now passes
both dest and source alignment to IRBuilder, instead of taking the minimum of
dest and source alignments.
Reviewed by Hal Finkel.
llvm-svn: 253512
target attribute, don't include "negative" subtarget features in the
list of required features. Builtins are positive by default so don't
need this change, but we pull the default list of features from the
command line and so need to make sure that we only include features
that are turned on for code generation in our error.
llvm-svn: 253242
In r253186, I changed the DIBuilder API to now take size and align
for reference types as well. This was done in preparation for upcoming
changes to the Verifier that will validate that sizes match between
DI types and IR values that are declared as having those types.
This updates clang to actually pass the information through.
llvm-svn: 253190
The ``disable_tail_calls`` attribute instructs the backend to not
perform tail call optimization inside the marked function.
For example,
int callee(int);
int foo(int a) __attribute__((disable_tail_calls)) {
return callee(a); // This call is not tail-call optimized.
}
Note that this attribute is different from 'not_tail_called', which
prevents tail-call optimization to the marked function.
rdar://problem/8973573
Differential Revision: http://reviews.llvm.org/D12547
llvm-svn: 252986
In r244063, I had caused these builtins to call the same-named library
functions, __atomic_*_fetch_SIZE. However, this was incorrect: while
those functions are in fact supported by GCC's libatomic, they're not
documented by the spec (and gcc doesn't ever call them).
Instead, you're /supposed/ to call the __atomic_fetch_* builtins and
then redo the operation inline to return the final value.
Differential Revision: http://reviews.llvm.org/D14385
llvm-svn: 252920
The C++ spec (3.6.1.3) says "The function `main` shall not be used within a program". This implies that it cannot recurse, so add the norecurse attribute to help the midend out a bit.
llvm-svn: 252902
target features that the caller function doesn't provide. This matches
the existing backend failure to inline functions that don't have
matching target features - and diagnoses earlier in the case of
always_inline.
Fix up a few test cases that were, in fact, invalid if you tried
to generate code from the backend with the specified target features
and add a couple of tests to illustrate what's going on.
This should fix PR25246.
llvm-svn: 252834
Adrian Prantl