The docs mention that `__builtin_reduce_add` and `__builtin_reduce_mul` support
both integer and floating point element types, but only integer element types
are actually supported. See https://github.com/llvm/llvm-project/issues/57847,
and specifically,
00874c48ea/clang/lib/Sema/SemaChecking.cpp (L2631) for the fact that floating point element types are not supported yet.
Fix the docs to only mention support for integer element types.
Found during clang 15 RC1 testing due to the new diagnostic added by @royjacobson since clang 14. Uncertain if this fix meets the bar to also be applied to the release branch.
If accepted, I'll need someone with commit access to submit on my behalf.
Reviewed By: royjacobson, aaron.ballman, erichkeane
Differential Revision: https://reviews.llvm.org/D131730
Previously the table in LanguageExtensions said that sizeof worked on
SVE types but this is only correct for fixed-length vectors so a
clarification has been added.
Previously the language extension documentation didn't mention SVE and
was incomplete in listing the C/C++ operators supported on NEON. This
corrects the documentation to be in line with the implementation.
We would like to make the ACLE NEON and SVE intrinsics more useable by
gating them on the target, not by ifdef preprocessor macros. In order to
do this the types they use need to be available. This patches makes
__bf16 always available under AArch64 not just when the bf16
architecture feature is present. This bringing it in-line with GCC. In
subsequent patches the NEON bfloat16x8_t and SVE svbfloat16_t types
(along with bfloat16_t used in arm_sve.h) will be made unconditional
too.
The operations valid on the types are still very limited. They can be
used as a storage type, but the intrinsics used for convertions are
still behind an ifdef guard in arm_neon.h/arm_bf16.h.
Differential Revision: https://reviews.llvm.org/D130973
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z |
parallel --xargs -0 cat | aspell list --mode=none --ignore-case |
grep -E '^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n |
grep -vE '.{25}' | aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential Revision: https://reviews.llvm.org/D130827
MSVC's pragma optimize turns optimizations on or off based on the list
passed. At the moment, we only support an empty optimization list.
i.e. `#pragma optimize("", on | off)`
From MSVC's docs:
| Parameter | Type of optimization |
|-----------|--------------------------------------------------|
| g | Enable global optimizations. Deprecated |
| s or t | Specify short or fast sequences of machine code |
| y | Generate frame pointers on the program stack |
https://docs.microsoft.com/en-us/cpp/preprocessor/optimize?view=msvc-170
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D125723
In the same spirit as D73543 and in reply to https://reviews.llvm.org/D126768#3549920 this patch is adding support for `__builtin_memset_inline`.
The idea is to get support from the compiler to easily write efficient memory function implementations.
This patch could be split in two:
- one for the LLVM part adding the `llvm.memset.inline.*` intrinsics.
- and another one for the Clang part providing the instrinsic as a builtin.
Differential Revision: https://reviews.llvm.org/D126903
Similar to the existing bitwise reduction builtins, this lowers to a llvm.vector.reduce.mul intrinsic call.
For other reductions, we've tried to share builtins for float/integer vectors, but the fmul reduction intrinsic also take a starting value argument and can either do unordered or serialized, but not reduction-trees as specified for the builtins. However we address fmul support this shouldn't affect the integer case.
Differential Revision: https://reviews.llvm.org/D117829
Compared to the old implementation:
* In C++, we only recurse into aggregate classes.
* Unnamed bit-fields are not printed.
* Constant evaluation is supported.
* Proper conversion is done when passing arguments through `...`.
* Additional arguments are supported and are injected prior to the
format string; this directly supports use with `fprintf`, for example.
* An arbitrary callable can be passed rather than only a function
pointer. In particular, in C++, a function template or overload set is
acceptable.
* All text generated by Clang is printed via `%s` rather than directly;
this avoids issues where Clang's pretty-printing output might itself
contain a `%` character.
* Fields of types that we don't know how to print are printed with a
`"*%p"` format and passed by address to the print function.
* No return value is produced.
Reviewed By: aaron.ballman, erichkeane, yihanaa
Differential Revision: https://reviews.llvm.org/D124221
There are many more instances of this pattern, but I chose to limit this change to .rst files (docs), anything in libcxx/include, and string literals. These have the highest chance of being seen by end users.
Reviewed By: #libc, Mordante, martong, ldionne
Differential Revision: https://reviews.llvm.org/D124708
This reverts commit b0bc93da92.
Changes: `s/_WIN32/_WIN64/g` in clang/test/SemaCXX/attr-trivial-abi.cpp.
The calling convention is specific to 64-bit windows. It's even in the name: `CCK_MicrosoftWin64`.
After this, the test passes with both `-triple i686-pc-win32` and `-triple x86_64-pc-win32`. Phew!
Reviewed By: gribozavr2
Differential Revision: https://reviews.llvm.org/D123059
This builtin returns the address of a global instance of the
`std::source_location::__impl` type, which must be defined (with an
appropriate shape) before calling the builtin.
It will be used to implement std::source_location in libc++ in a
future change. The builtin is compatible with GCC's implementation,
and libstdc++'s usage. An intentional divergence is that GCC declares
the builtin's return type to be `const void*` (for
ease-of-implementation reasons), while Clang uses the actual type,
`const std::source_location::__impl*`.
In order to support this new functionality, I've also added a new
'UnnamedGlobalConstantDecl'. This artificial Decl is modeled after
MSGuidDecl, and is used to represent a generic concept of an lvalue
constant with global scope, deduplicated by its value. It's possible
that MSGuidDecl itself, or some of the other similar sorts of things
in Clang might be able to be refactored onto this more-generic
concept, but there's enough special-case weirdness in MSGuidDecl that
I gave up attempting to share code there, at least for now.
Finally, for compatibility with libstdc++'s <source_location> header,
I've added a second exception to the "cannot cast from void* to T* in
constant evaluation" rule. This seems a bit distasteful, but feels
like the best available option.
Reviewers: aaron.ballman, erichkeane
Differential Revision: https://reviews.llvm.org/D120159
D117296 removed wording for __builtin_assume, D120205 restored the
wording, but the last sentence was only partly restored. This restores
the rest of the last sentence.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D122423
This reverts commit 56d46b36fc.
The LIT test SemaCXX/attr-trivial-abi.cpp is failing with 32bit build on
Windows. All the lines with the ifdef WIN32 are asserting but they are
not expected to. It looks like the LIT test was not tested on a 32bit
build of the compiler.
This adds support for multiple attributes in `#pragma clang attribute push`, for example:
```
```
or
```
```
Related attributes can now be applied with a single pragma, which makes it harder for developers to make an accidental error later when editing the code.
rdar://78269653
Differential Revision: https://reviews.llvm.org/D121283
This is the `ext_vector_type` alternative to D81083.
This patch extends Clang to allow 'bool' as a valid vector element type
(attribute ext_vector_type) in C/C++.
This is intended as the canonical type for SIMD masks and facilitates
clean vector intrinsic declarations. Vectors of i1 are supported on IR
level and below down to many SIMD ISAs, such as AVX512, ARM SVE (fixed
vector length) and the VE target (NEC SX-Aurora TSUBASA).
The RFC on cfe-dev: https://lists.llvm.org/pipermail/cfe-dev/2020-May/065434.html
Reviewed By: erichkeane
Differential Revision: https://reviews.llvm.org/D88905
This patch implements `__builtin_elementwise_add_sat` and `__builtin_elementwise_sub_sat` builtins.
These map to the add/sub saturated math intrinsics described here:
https://llvm.org/docs/LangRef.html#saturation-arithmetic-intrinsics
With this in place we should then be able to replace the x86 SSE adds/subs intrinsics with these generic variants - it looks like other targets should be able to use these as well (arm/aarch64/webassembly all have similar examples in cgbuiltin).
Differential Revision: https://reviews.llvm.org/D117898
This reverts commit 852afed5e0.
Changes since D114732:
On PS4, we reverse the expectation that classes whose constructor is deleted are not trivially relocatable. Because, at the moment, only classes which are passed in registers are trivially relocatable, and PS4 allows passing in registers if the copy constructor is deleted, the original assertions were broken on PS4.
(This is kinda similar to DR1734.)
Reviewed By: gribozavr2
Differential Revision: https://reviews.llvm.org/D119017
This change enables library code to skip paired move-construction and destruction for `trivial_abi` types, as if they were trivially-movable and trivially-destructible. This offers an extension to the performance fix offered by `trivial_abi`: rather than only offering trivial-type-like performance for pass-by-value, it also offers it for library code that moves values but not as arguments.
For example, if we use `memcpy` for trivially relocatable types inside of vector reallocation, and mark `unique_ptr` as `trivial_abi` (via `_LIBCPP_ABI_ENABLE_UNIQUE_PTR_TRIVIAL_ABI` / `_LIBCPP_ABI_UNSTABLE` / etc.), this would speed up `vector<unique_ptr>::push_back` by 40% on my benchmarks. (Though note that in this case, the compiler could have done this anyway, but happens not to due to the inlining horizon.)
If accepted, I intend to follow up with exactly such changes to library code, including and especially `std::vector`, making them use a trivial relocation operation on trivially relocatable types.
**D50119 and P1144:**
This change is very similar to D50119, which was rejected from Clang. (That change was an implementation of P1144, which is not yet part of the C++ standard.)
The intent of this change, rather than trying to pick a winning proposal for trivial relocation operations, is to extend the behavior of `trivial_abi` in a way that could be made compatible with any such proposal. If P1144 or any similar proposal were accepted, then `trivial_abi`, `__is_trivially_relocatable`, and everything else in this change would be redefined in terms of that.
**Safety:**
It's worth pointing out, specifically, that `trivial_abi` already implies trivial relocatability in a narrow sense: a `trivial_abi` type, when passed by value, has its constructor run in one location, and its destructor run in another, after the type has been trivially relocated (through registers).
Trivial relocatability optimizations could change the number of paired constructor/destructor calls, but this seems unlikely to matter for `trivial_abi` types.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D114732
I noticed that the following case would compile in Clang but not GCC:
void *x(void) {
void *p = &&foo;
asm goto ("# %0\n\t# %l1":"+r"(p):::foo);
foo:;
return p;
}
Changing the output template above from %l2 would compile in GCC but not
Clang.
This demonstrates that when using tied outputs (say via the "+r" output
constraint), the hidden inputs occur or are numbered BEFORE the labels,
at least with GCC.
In fact, GCC does denote this in its documentation:
https://gcc.gnu.org/onlinedocs/gcc-11.2.0/gcc/Extended-Asm.html#Goto-Labels
> Output operand with constraint modifier ‘+’ is counted as two operands
> because it is considered as one output and one input operand.
For the sake of compatibility, I think it's worthwhile to just make this
change.
It's better to use symbolic names for compatibility (especially now
between released version of Clang that support asm goto with outputs).
ie. %l1 from the above would be %l[foo]. The GCC docs also make this
recommendation.
Also, I cleaned up some cruft in GCCAsmStmt::getNamedOperand. AFAICT,
NumPlusOperands was no longer used, though I couldn't find which commit
didn't clean that up correctly.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98096
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103640
Link: https://gcc.gnu.org/onlinedocs/gcc-11.2.0/gcc/Extended-Asm.html#Goto-Labels
Reviewed By: void
Differential Revision: https://reviews.llvm.org/D115471
Control-Flow Integrity (CFI) replaces references to address-taken
functions with pointers to the CFI jump table. This is a problem
for low-level code, such as operating system kernels, which may
need the address of an actual function body without the jump table
indirection.
This change adds the __builtin_function_start() builtin, which
accepts an argument that can be constant-evaluated to a function,
and returns the address of the function body.
Link: https://github.com/ClangBuiltLinux/linux/issues/1353
Depends on D108478
Reviewed By: pcc, rjmccall
Differential Revision: https://reviews.llvm.org/D108479
I found that the coroutine intrinsic llvm.coro.param in documentation
(https://llvm.org/docs/Coroutines.html#id101) didn't get used actually
since there isn't lowering codes in LLVM. I also checked the
implementation of libstdc++ and libc++. Both of them didn't use
llvm.coro.param. So I am pretty sure that the llvm.coro.param intrinsic
is unused. I think it would be better t to remove it to avoid possible
misleading understandings.
Note: according to [class.copy.elision]/p1.3, this optimization is
allowed by the C++ language specification. Let's make it someday.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D115222
WG14 adopted the _ExtInt feature from Clang for C23, but renamed the
type to be _BitInt. This patch does the vast majority of the work to
rename _ExtInt to _BitInt, which accounts for most of its size. The new
type is exposed in older C modes and all C++ modes as a conforming
extension. However, there are functional changes worth calling out:
* Deprecates _ExtInt with a fix-it to help users migrate to _BitInt.
* Updates the mangling for the type.
* Updates the documentation and adds a release note to warn users what
is going on.
* Adds new diagnostics for use of _BitInt to call out when it's used as
a Clang extension or as a pre-C23 compatibility concern.
* Adds new tests for the new diagnostic behaviors.
I want to call out the ABI break specifically. We do not believe that
this break will cause a significant imposition for early adopters of
the feature, and so this is being done as a full break. If it turns out
there are critical uses where recompilation is not an option for some
reason, we can consider using ABI tags to ease the transition.
Operations are emulated by software emulation and “float” instructions.
This patch is allowing the support of _Float16 type without the use of
-max512fp16 flag. The final goal being, perform _Float16 emulation for
all arithmetic expressions.
There was some confusion during the discussion of a patch as to whether
`any` can be used to blast an attribute with no subject list onto
basically everything in a program by not specifying a subrule. This
patch adds documentation and tests to make it clear that this situation
is not supported and will be diagnosed.
Anastasia Stulova