Due to the encoding changes in GFX11, we had a hack in place that
disables the use of VGPRs above 128. This patch removes the need for
that hack.
We introduce a new register class VGPR_32_Lo128 which is used for 16-bit
operands of VOP1, VOP2, and VOPC instructions. This register class only has the
low 128 VGPRs, but is otherwise identical to VGPR_32. Therefore, 16-bit VOP1,
VOP2, and VOPC instructions are correctly limited to use the first 128
VGPRs, while the other instructions can freely use all 256.
We introduce new pseduo-instructions used on GFX11 which have the suffix
t16 (True 16) to use the VGPR_32_Lo128 register class.
Reviewed By: foad, rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D133723
Modifies the GCNDPPCombine pass to enable DPP formation for the new DPP
instruction in gfx11, namely VOP3 encoded instructions with DPP and VOPC
with DPP.
Depends on D128656
Reviewed By: #amdgpu, rampitec
Differential Revision: https://reviews.llvm.org/D128682
VOPD is a new encoding for dual-issue instructions for use in wave32.
This patch includes MC layer support only.
A VOPD instruction is constituted of an X component (for which there are
13 possible opcodes) and a Y component (for which there are the 13 X
opcodes plus 3 more). Most of the complexity in defining and parsing
a VOPD operation arises from the possible different total numbers of
operands and deferred parsing of certain operands depending on the
constituent X and Y opcodes.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D128218
Includes dpp versions of VOP3P instructions.
Patch 18/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126917
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126978
There was an issue with encoding wide (>64 bit) instructions on
BigEndian hosts, which is fixed in D127195. Therefore reland this.
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Differential Revision: https://reviews.llvm.org/D126483
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126475
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126483
This patch includes MC layer support for VOP3 encoded instructions and generic VOP support
classes.
Some VOP1 and VOP2 instructions which share an encoding with gfx10 and are using
the AssemblerPredicate = isGFX10Plus are also enabled. That predicate
will be changed to isGFX10Only in a later patch.
Patch 15/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D126468
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D126475
In 'trunc' i16/32/64 to i1 pattern the 'and $src, 1' node supply operand to 'setcc'.
The latter is selected to S_CMP_EQ/V_CMP_EQ dependent on the divergence. In case the 'and' is scalar
and 'setcc' is divergent, we need VGPR to SGPR copy to adjust input operand for V_CMP_EQ.
This patch changes the S_AND_B32 to V_AND_B32_e64 in the 'trunc to i1' divergent patterns.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D116241
By convention, VOP1/2/C instructions which can be promoted to VOP3 have _e32 suffix while promoted instructions have _e64 suffix. Instructions which have a single variant should have no _e32/_e64 suffix. Unfortunately there was no simple way to identify single variant instructions - it was implemented by a hack. See bug https://bugs.llvm.org/show_bug.cgi?id=39086.
This fix simplifies handling of single VOP instructions by adding a dedicated flag.
Differential Revision: https://reviews.llvm.org/D99408
Coyp SchedRW from pseudos to real instructions so that llvm-mca has
access to it. This is NFC for normal compiler codegen, which schedules
pseudos not real instructions.
Add an llvm-mca test for some high latency double-precision instructions
as a smoke test.
Differential Revision: https://reviews.llvm.org/D99187
This is used to mark transcendental instructions that execute on a
separate pipeline from the normal VALU pipeline.
Differential Revision: https://reviews.llvm.org/D92042
This may be missing a few overrides to set it off still in some
special cases. Since the flags set during selection should now be
reliably preserved, this should not change codegen for non-strictfp
functions.
This is the groundwork required to implement strictfp. For now, this
should be NFC for regular instructoins (many instructions just gain an
extra use of a reserved register). Regalloc won't rematerialize
instructions with reads of physical registers, but we were suffering
from that anyway with the exec reads.
Should add it for all the related FP uses (possibly with some
extras). I did not add it to either the gpr index mode instructions
(or every single VALU instruction) since it's a ridiculous feature
already modeled as an arbitrary side effect.
Also work towards marking instructions with FP exceptions. This
doesn't actually set the bit yet since this would start to change
codegen. It seems nofpexcept is currently not implied from the regular
IR FP operations. Add it to some MIR tests where I think it might
matter.
Unfortunately MnemonicAlias defines a "Predicates" field just like an
instruction or pattern, with a somewhat different interpretation.
This ends up overriding the intended Predicates set by
PredicateControl on the pseudoinstruction defintions with an empty
list. This allowed incorrectly selecting instructions that should have
been rejected due to the SubtargetPredicate from patterns on the
instruction definition.
This does remove the divergent predicate from the 64-bit shift
patterns, which were already not used for the 32-bit shift, so I'm not
sure what the point was. This also removes a second, redundant copy of
the 64-bit divergent patterns.
llvm-svn: 371427
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
Summary: This change enables VOP3 shifts to be explicitly selected
dependent on the divergence.
Differential Revision: https://reviews.llvm.org/D52559
Reviewers: rampitec
llvm-svn: 343455
Summary: This change is the first part of the AMDGPU target description
change. The aim of it is the effective splitting the vector and scalar
flows at the selection stage. Selection uses predicate functions based
on the framework implemented earlier - https://reviews.llvm.org/D35267
Differential revision: https://reviews.llvm.org/D52019
Reviewers: rampitec
llvm-svn: 342719
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Joe Nash