This feature implements support for making entries in the exception section
on XCOFF on the direct assembly path using the ".except" pseudo-op. It also
provides functionality to lower entries (comprised of language and reason
codes) into the exception section through the use of annotation metadata
attached to llvm.ppc.trap/trapd/tw/tdw intrinsics. Integrated assembler
support will be provided in another review. https://reviews.llvm.org/D133030
needs to merge first for LIT tests
Reviewed By: shchenz, RKSimon
Differential Revision: https://reviews.llvm.org/D132146
Summary:
The existing undefined-bitfield-to-operand matching behavior is very
hard to understand, due to the combination of positional and named
matching. This can make it difficult to track down a bug in a target's
instruction definitions.
Over the last decade, folks have tried to work-around this in various
ways, but it's time to finally ditch the positional matching. With
https://reviews.llvm.org/D131003, there are no longer cases that
_require_ positional matching, and it's time to start removing usage
and support for it.
Therefore: add a (default-false) option, and set it to true only in
those targets that require positional matching today. Subsequent
changes will start cleaning up additional in-tree targets.
NOTE TO OUT OF TREE TARGET MAINTAINERS:
If this change breaks your build, you may restore the previous
behavior simply by adding:
let useDeprecatedPositionallyEncodedOperands = 1;
to your target's InstrInfo tablegen definition. However, this is
temporary -- the option will be removed in the future.
If your target does not set 'decodePositionallyEncodedOperands', you
may thus start migrating to named operands. However, if you _do_
currently set that option, I recommend waiting until a subsequent
change lands, which adds decoder support for named sub-operands.
Differential Revision: https://reviews.llvm.org/D134073
All in-tree targets pass pointer-sized ConstantSDNodes to the
method. This overload reduced amount of boilerplate code a bit. This
also makes getCALLSEQ_END consistent with getCALLSEQ_START, which
already takes uint64_ts.
The class priority is expected to be at most 5 bits before it starts
clobbering bits used for other fields. Also clamp the instruction
distance in case we have millions of instructions.
AMDGPU was accidentally overflowing into the global priority bit in
some cases. I think in principal we would have wanted this, but in the
cases I've looked at, it had the counter intuitive effect and
de-prioritized the large register tuple.
Avoid using weird bit hack PPC uses for global priority. The
AllocationPriority field is really 5 bits, and PPC was relying on
overflowing this to 6-bits to forcibly set the global priority
bit. Split this out as a separate flag to avoid having magic behavior
for values above 31.
doesn't happened in peephole optimizer.
Summary: Converting a comparison against 1 or -1 into a comparison
against 0 can exploit record-form instructions for comparison optimization.
The conversion will happen only when a record-form instruction can be used
to replace the comparison during the peephole optimizer (see function optimizeCompareInstr).
In post-RA, we also want to optimize the comparison by using the record
form (see D131873) and it requires additional dataflow analysis to reliably
find uses of the CR register set.
It's reasonable to common the conversion for both peephole optimizer and
post-RA optimizer.
Converting to comparison against zero even when the optimization doesn't
happened in peephole optimizer may create additional opportunities for the
post-RA optimization.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D131374
LLVM contains a helpful function for getting the size of a C-style
array: `llvm::array_lengthof`. This is useful prior to C++17, but not as
helpful for C++17 or later: `std::size` already has support for C-style
arrays.
Change call sites to use `std::size` instead.
Differential Revision: https://reviews.llvm.org/D133429
Propagate PC sections metadata to MachineInstr when FastISel is doing
instruction selection.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D130884
This patch is essentially an alternative to https://reviews.llvm.org/D75836 and was mentioned by @lhames in a comment.
The gist of the issue is that Mach-O has restrictions on which kind of sections are allowed after debug info has been emitted, which is also properly asserted within LLVM. Problem is that stack maps are currently emitted as one of the last sections in each target-specific AsmPrinter so far, which would cause the assertion to trigger. The current approach of special casing for the `__LLVM_STACKMAPS` section is not viable either, as downstream users can overwrite the stackmap format using plugins, which may want to use different sections.
This patch fixes the issue by emitting the stack map earlier, right before debug info is emitted. The way this is implemented is by taking the choice when to emit the StackMap away from the target AsmPrinter and doing so in the base class. The only disadvantage of this approach is that the `StackMaps` member is now part of the base class, even for targets that do not support them. This is functionaly not a problem however, as emitting an empty `StackMaps` is a no-op.
Differential Revision: https://reviews.llvm.org/D132708
Add isNotDuplicable to CTRLoop pseudo instructions, to avoid other pass
such as early-tailduplication break the loop structure by duplicating
pseudo instructions.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D132738
This patch adds a Type operand to the TLI isCheapToSpeculateCttz/isCheapToSpeculateCtlz callbacks, allowing targets to decide whether branches should occur on a type-by-type/legality basis.
For X86, this patch proposes to allow CTTZ speculation for i8/i16 types that will lower to promoted i32 BSF instructions by masking the operand above the msb (we already do something similar for i8/i16 TZCNT). This required a minor tweak to CTTZ lowering - if the src operand is known never zero (i.e. due to the promotion masking) we can remove the CMOV zero src handling.
Although BSF isn't very fast, most CPUs from the last 20 years don't do that bad a job with it, although there are some annoying passthrough EFLAGS dependencies. Additionally, now that we emit 'REP BSF' in most cases, we are tending towards assuming this will most likely be executed as a TZCNT instruction on any semi-modern CPU.
Differential Revision: https://reviews.llvm.org/D132520
This commit moves the information on whether a register is constant into
the Tablegen files to allow generating the implementaiton of
isConstantPhysReg(). I've marked isConstantPhysReg() as final in this
generated file to ensure that changes are made to tablegen instead of
overriding this function, but if that turns out to be too restrictive,
we can remove the qualifier.
This should be pretty much NFC, but I did notice that e.g. the AMDGPU
generated file also includes the LO16/HI16 registers now.
The new isConstant flag will also be used by D131958 to ensure that
constant registers are marked as call-preserved.
Differential Revision: https://reviews.llvm.org/D131962
Summary: Currently, an error was reported when a thread local symbol has an invalid name. D100956 create a new symbol to prefix the TLS symbol name with a dot. When the symbol name is renamed, the error occurs. This patch uses the original symbol name (name in the symbol table) as the input for the symbol for TOC entry.
Reviewed By: shchenz, lkail
Differential Revision: https://reviews.llvm.org/D132348
There were two sections of code that had a lot of lambdas and in the patch
D40554 it was suggested that we clean them up as a follow-up NFC patch.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D132394
This has the effect of exposing the power-of-two property for use in memory op costing, but no target actually uses it yet. The main point of this change is simple consistency with the recently changes getArithmeticInstrCost, and to remove the last (interface) use of OperandValueKind.
This change completes the process of replacing OperandValueKind and OperandValueProperties which were previously passed independently in this API with a single container class which contains both.
This is the change which motivated the whole sequence which preceeded it. In an original spike version of this change, I'd noticed a nasty bug: I'd changed the signature without changing names, and as result, we silently passed additional information through a callsite which previously dropped the power-of-two fact. This might be harmless in most cases, but at least a couple clearly dependend for correctness on not passing that property through.
I did my best to split off prior changes which reduced the scope of this one, and which made it possible to use compiler assistance. For instance, every parameter which changes type in this change also changes name. This was intentional to make sure that every call site possible effected must show up in the diff. This let me audit each one closely.
Defaults to TCK_RecipThroughput - as most explicit calls were assuming TCK_RecipThroughput (vectorizers) or was just doing a before-vs-after comparison (vectorcombiner). Calls via getInstructionCost were just dropping the CostKind, so again there should be no change at this time (as getShuffleCost and its expansions don't use CostKind yet) - but it will make it easier for us to better account for size/latency shuffle costs in inline/unroll passes in the future.
Differential Revision: https://reviews.llvm.org/D132287
This patch fixes the following two bugs in `PPCInstrInfo::isSignOrZeroExtended` helper, which is used from sign-/zero-extension elimination in PPCMIPeephole pass.
- Registers defined by load with update (e.g. LBZU) were identified as already sign or zero-extended. But it is true only for the first def (loaded value) and not for the second def (i.e. updated pointer).
- Registers defined by ORIS/XORIS were identified as already sign-extended. But, it is not true for sign extension depending on the immediate (while it is ok for zero extension).
To handle the first case, the parameter for the helpers is changed from `MachineInstr` to a register number to distinguish first and second defs. Also, this patch moves the initialization of PPCMIPeepholePass to allow mir test case.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D40554
* Replace getUserCost with getInstructionCost, covering all cost kinds.
* Remove getInstructionLatency, it's not implemented by any backends, and we should fold the functionality into getUserCost (now getInstructionCost) to make it easier for targets to handle the cost kinds with their existing cost callbacks.
Original Patch by @samparker (Sam Parker)
Differential Revision: https://reviews.llvm.org/D79483
TragetLowering had two last InstructionCost related `getTypeLegalizationCost()`
and `getScalingFactorCost()` members, but all other costs are processed in TTI.
E.g. it is not comfortable to use other TTI members in these two functions
overrided in a target.
Minor refactoring: `getTypeLegalizationCost()` now doesn't need DataLayout
parameter - it was always passed from TTI.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D117723
These changes to address issue
https://github.com/llvm/llvm-project/issues/55857.
Since R30/S30 is used as pointer (32 bits) for GOT Table in the ppc32 ABI,
remove it from the SPE callee save register when PIC is enabled.
This prevents emitting the SPE load and store for S30 and S31 regs.
Differential revision: https://reviews.llvm.org/D127495
SPE doesn't have a fmadd instruction, so don't bother hoisting a
multiply and add sequence to this, as it'd become just a library call.
Hoisting happens too late for the CTR usability test to veto using the
CTR in a loop, and results in an assert "Invalid PPC CTR loop!".
Map hardware loop intrinsics loop_decrement and set_loop_iteration
to the new PowerPC pseudo instructions, so that the hardware loop
intrinsics will be expanded to normal cmp+branch form or ctrloop
form based on the CTR register usage on MIR level.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D123366
1) Overloaded (instruction-based) method is a wrapper around the current (opcode-based) method.
2) This patch also changes a few callsites (VectorCombine.cpp,
SLPVectorizer.cpp, CodeGenPrepare.cpp) to call the overloaded method.
3) This is a split of D128302.
Differential Revision: https://reviews.llvm.org/D131114
This patch ensures consistency in the construction of FP_ROUND nodes
such that they always use ISD::TargetConstant instead of ISD::Constant.
This additionally fixes a bug in the AArch64 SVE backend where patterns
were matching against TargetConstant nodes and sometimes failing when
passed a Constant node.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D130370
In this patch we replace common code patterns with the use of utility
functions for dealing with profiling metadata. There should be no change
in functionality, as the existing checks should be preserved in all
cases.
Reviewed By: bogner, davidxl
Differential Revision: https://reviews.llvm.org/D128860
In this patch we replace common code patterns with the use of utility
functions for dealing with profiling metadata. There should be no change
in functionality, as the existing checks should be preserved in all
cases.
Reviewed By: bogner, davidxl
Differential Revision: https://reviews.llvm.org/D128860
I don't have any evidence these particular uses are actually causing any
issues, but we should avoid accidentally truncating immediate values
depending on the host.
We can't guarantee the long always 64 bits like WINDOWS or LLP64 data
model (rare but we should consider).
So use int64_t from inttypes.h and safe in this case.
Fixes https://github.com/llvm/llvm-project/issues/55911 .
This was stored in LiveIntervals, but not actually used for anything
related to LiveIntervals. It was only used in one check for if a load
instruction is rematerializable. I also don't think this was entirely
correct, since it was implicitly assuming constant loads are also
dereferenceable.
Remove this and rely only on the invariant+dereferenceable flags in
the memory operand. Set the flag based on the AA query upfront. This
should have the same net benefit, but has the possible disadvantage of
making this AA query nonlazy.
Preserve the behavior of assuming pointsToConstantMemory implying
dereferenceable for now, but maybe this should be changed.
We add the following ISEL pattern for i64 imm in D87384, this patch is for i32.
`mul with (2^N * int16_imm) -> MULLI + RLWINM`
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D129708
isSafeToExpand() for addrecs depends on whether the SCEVExpander
will be used in CanonicalMode. At least one caller currently gets
this wrong, resulting in PR50506.
Fix this by a) making the CanonicalMode argument on the freestanding
functions required and b) adding member functions on SCEVExpander
that automatically take the SCEVExpander mode into account. We can
use the latter variant nearly everywhere, and thus make sure that
there is no chance of CanonicalMode mismatch.
Fixes https://github.com/llvm/llvm-project/issues/50506.
Differential Revision: https://reviews.llvm.org/D129630
D25618 added a method to verify the instruction predicates for an
emitted instruction, through verifyInstructionPredicates added into
<Target>MCCodeEmitter::encodeInstruction. This is a very useful idea,
but the implementation inside MCCodeEmitter made it only fire for object
files, not assembly which most of the llvm test suite uses.
This patch moves the code into the <Target>_MC::verifyInstructionPredicates
method, inside the InstrInfo. The allows it to be called from other
places, such as in this patch where it is called from the
<Target>AsmPrinter::emitInstruction methods which should trigger for
both assembly and object files. It can also be called from other places
such as verifyInstruction, but that is not done here (it tends to catch
errors earlier, but in reality just shows all the mir tests that have
incorrect feature predicates). The interface was also simplified
slightly, moving computeAvailableFeatures into the function so that it
does not need to be called externally.
The ARM, AMDGPU (but not R600), AVR, Mips and X86 backends all currently
show errors in the test-suite, so have been disabled with FIXME
comments.
Recommitted with some fixes for the leftover MCII variables in release
builds.
Differential Revision: https://reviews.llvm.org/D129506
Nico Weber