For now, clang and gcc both failed to generate sae version from _mm512_cvt_roundps_ph:
https://godbolt.org/z/oh7eTGY5z. Intrinsic guide description is also wrong, which will be
update soon.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D132641
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Relands 67504c9549 with a fix for
32-bit builds.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
This patch adds a Type operand to the TLI isCheapToSpeculateCttz/isCheapToSpeculateCtlz callbacks, allowing targets to decide whether branches should occur on a type-by-type/legality basis.
For X86, this patch proposes to allow CTTZ speculation for i8/i16 types that will lower to promoted i32 BSF instructions by masking the operand above the msb (we already do something similar for i8/i16 TZCNT). This required a minor tweak to CTTZ lowering - if the src operand is known never zero (i.e. due to the promotion masking) we can remove the CMOV zero src handling.
Although BSF isn't very fast, most CPUs from the last 20 years don't do that bad a job with it, although there are some annoying passthrough EFLAGS dependencies. Additionally, now that we emit 'REP BSF' in most cases, we are tending towards assuming this will most likely be executed as a TZCNT instruction on any semi-modern CPU.
Differential Revision: https://reviews.llvm.org/D132520
TragetLowering had two last InstructionCost related `getTypeLegalizationCost()`
and `getScalingFactorCost()` members, but all other costs are processed in TTI.
E.g. it is not comfortable to use other TTI members in these two functions
overrided in a target.
Minor refactoring: `getTypeLegalizationCost()` now doesn't need DataLayout
parameter - it was always passed from TTI.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D117723
This requires us to override the isTargetCanonicalConstantNode callback introduced in D128144, so we can recognise the various cases where a VBROADCAST_LOAD constant is being reused at different vector widths to prevent infinite loops.
This resolves problems reported in commit 1a20252978.
1. Promote to float lowering for nodes XINT_TO_FP
2. Bail out f16 from shuffle combine due to vector type is not legal in the version
GCC and Clang/LLVM will support `_Float16` on X86 in C/C++, following
the latest X86 psABI. (https://gitlab.com/x86-psABIs)
_Float16 arithmetic will be performed using native half-precision. If
native arithmetic instructions are not available, it will be performed
at a higher precision (currently always float) and then truncated down
to _Float16 immediately after each single arithmetic operation.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D107082
This adds a `TargetLoweringBase::getSwitchConditionType` callback to
give targets a chance to control the type used in
`CodeGenPrepare::optimizeSwitchInst`.
Implement callback for X86 to avoid i8 and i16 types where possible as
they often incur extra zero-extensions.
This is NFC for non-X86 targets.
Differential Revision: https://reviews.llvm.org/D124894
Use the same enum as the other atomic instructions for consistency, in
preparation for addition of another strategy.
Introduce a new "Expand" option, since the store expansion does not
use cmpxchg. Alternatively, the existing CmpXChg strategy could be
renamed to Expand.
This is used for f16 emulation. We emulate f16 for SSE2 targets and
above. Refactoring makes the future code to be more clean.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D122475
Pulled out of D106237, this replaces the X86ISD::AVG DAG node with the
generic ISD::AVGCEILU. It doesn't remove the detectAVGPattern method,
but the extra generic ISel matching does alter the existing test.
Differential Revision: https://reviews.llvm.org/D119073
This is no-functional-change-intended because only the
x86 target enables the TLI hook currently.
We can add fmul/fdiv opcodes to the switch similar to the
proposal D119111, but we don't need to make other changes
like enabling target-specific combines.
We can also add integer opcodes (add, or, shl, etc.) to
the switch because this function is called from all of the
generic binary opcodes.
The goal is to incrementally enable the profitable diffs
from D90113 while avoiding regressions.
Differential Revision: https://reviews.llvm.org/D119150
As an extension to D111976, this converts clamp fptosi, clamped between
0 and (2^n)-1 to a fptoui.sat. This can greatly help on targets with
conversions that naturally saturate, such as Arm.
X86 disables the transform as some of the test cases increases in size.
A fptoui.sat necessitates a fp clamp without native support, so there is
little use in converting if the instruction is just going to be
expanded.
Differential Revision: https://reviews.llvm.org/D112428
The changes in D80163 defered the assignment of MachineMemOperand (MMO)
until the X86ExpandPseudo pass. This will result in crash due to prolog
insert point been sunk across the pseudo instruction VASTART_SAVE_XMM_REGS.
Moving the assignment to the creation of the node can avoid the problem.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D112859
On Windows, i128 arguments are passed as indirect arguments, and
they are returned in xmm0.
This is mostly fixed up by `WinX86_64ABIInfo::classify` in Clang, making
the IR functions return v2i64 instead of i128, and making the arguments
indirect. However for cases where libcalls are generated in the target
lowering, the lowering uses the default x86_64 calling convention for
i128, where they are passed/returned as a register pair.
Add custom lowering logic, similar to the existing logic for i128
div/mod (added in 4a406d32e9),
manually making the libcall (while overriding the return type to
v2i64 or passing the arguments as pointers to arguments on the stack).
X86CallingConv.td doesn't seem to handle i128 at all, otherwise
the windows specific behaviours would ideally be implemented as
overrides there, in generic code, handling these cases automatically.
This fixes https://bugs.llvm.org/show_bug.cgi?id=48940.
Differential Revision: https://reviews.llvm.org/D110413
For x86 Darwin, we have a stack checking feature which re-uses some of this
machinery around stack probing on Windows. Renaming this to be more appropriate
for a generic feature.
Differential Revision: https://reviews.llvm.org/D109993
In-register structure returns are not special, and handled by lowering
to multiple-value tuples. We can tail-call from non-sret fns to
structure-returning functions, except on i686 where the sret pointer
is callee-pop.
Differential Revision: https://reviews.llvm.org/D105807
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
This patch adds support for lowering function calls with the
`clang.arc.attachedcall` bundle. The goal is to expand such calls to the
following sequence of instructions:
callq @fn
movq %rax, %rdi
callq _objc_retainAutoreleasedReturnValue / _objc_unsafeClaimAutoreleasedReturnValue
This sequence of instructions triggers Objective-C runtime optimizations,
hence we want to ensure no instructions get moved in between them.
This patch achieves that by adding a new CALL_RVMARKER ISD node,
which gets turned into the CALL64_RVMARKER pseudo, which eventually gets
expanded into the sequence mentioned above.
The ObjC runtime function to call is determined by the
argument in the bundle, which is passed through as a
target constant to the pseudo.
@ahatanak is working on using this attribute in the front- & middle-end.
Together with the front- & middle-end changes, this should address
PR31925 for X86.
This is the X86 version of 46bc40e502,
which added similar support for AArch64.
Reviewed By: ab
Differential Revision: https://reviews.llvm.org/D94597
These constraints are machine agnostic; there's no reason to handle
these per-arch. If arches don't support these constraints, then they
will fail elsewhere during instruction selection. We don't need virtual
calls to look these up; TargetLowering::getInlineAsmMemConstraint should
only be overridden by architectures with additional unique memory
constraints.
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D100416
That review is extracted from D69372.
It fixes https://bugs.llvm.org/show_bug.cgi?id=42219 bug.
For the noimplicitfloat mode, the compiler mustn't generate
floating-point code if it was not asked directly to do so.
This rule does not work with variable function arguments currently.
Though compiler correctly guards block of code, which copies xmm vararg
parameters with a check for %al, it does not protect spills for xmm registers.
Thus, such spills are generated in non-protected areas and could break code,
which does not expect floating-point data. The problem happens in -O0
optimization mode. With this optimization level there is used
FastRegisterAllocator, which spills virtual registers at basic block boundaries.
Register Allocator does not protect spills with additional control-flow modifications.
Thus to resolve that problem, it is suggested to not copy incoming physical
registers into virtual registers. Instead, store incoming physical xmm registers
into the memory from scratch.
Differential Revision: https://reviews.llvm.org/D80163
We already have an experimental option to tune loop alignment. Its impact
is very wide (and there is a suspicion that it's not always profitable). We want
to have something more narrow to play with. This patch adds similar option that
overrides preferred alignment for innermost loops. This is for experimental
purposes, default values do not change the existing behavior.
Differential Revision: https://reviews.llvm.org/D94895
Reviewed By: pengfei
Adapted from D54696 by @nikic.
This patch improves lowering of saturating float to
int conversions, FP_TO_[SU]INT_SAT, for X86.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D86079
When building abseil-cpp `bin/absl_hash_test` with Clang in -fno-pic
mode, an instruction like `movl $foo-2147483648, $eax` may be produced
(subtracting a number from the address of a static variable). If foo's
address is smaller than 2147483648, GNU ld/gold/LLD will error because
R_X86_64_32 cannot represent a negative value.
```
using absl::Hash;
struct NoOp {
template < typename HashCode >
friend HashCode AbslHashValue(HashCode , NoOp );
};
template <typename> class HashIntTest : public testing::Test {};
TYPED_TEST_SUITE_P(HashIntTest);
TYPED_TEST_P(HashIntTest, BasicUsage) {
if (std::numeric_limits< TypeParam >::min )
EXPECT_NE(Hash< NoOp >()({}),
Hash< TypeParam >()(std::numeric_limits< TypeParam >::min()));
}
REGISTER_TYPED_TEST_CASE_P(HashIntTest, BasicUsage);
using IntTypes = testing::Types< int32_t>;
INSTANTIATE_TYPED_TEST_CASE_P(My, HashIntTest, IntTypes);
ld: error: hash_test.cc:(function (anonymous namespace)::gtest_suite_HashIntTest_::BasicUsage<int>::TestBody(): .text+0x4E472): relocation R_X86_64_32 out of range: 18446744071564237392 is not in [0, 4294967295]; references absl::hash_internal::HashState::kSeed
```
Actually any negative offset is not allowed because the symbol address
can be zero (e.g. set by `-Wl,--defsym=foo=0`). So disallow such folding.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D93931
Followup to D92645 - remove the remaining places where we create X86ISD::SUBV_BROADCAST, and fold splatted vector loads to X86ISD::SUBV_BROADCAST_LOAD instead.
Remove all the X86SubVBroadcast isel patterns, including all the fallbacks for if memory folding failed.
Subvector broadcasts are only load instructions, yet X86ISD::SUBV_BROADCAST treats them more generally, requiring a lot of fallback tablegen patterns.
This initial patch replaces constant vector lowering inside lowerBuildVectorAsBroadcast with direct X86ISD::SUBV_BROADCAST_LOAD loads which helps us merge a number of equivalent loads/broadcasts.
As well as general plumbing/analysis additions for SUBV_BROADCAST_LOAD, I needed to wrap SelectionDAG::makeEquivalentMemoryOrdering so it can handle result chains from non generic LoadSDNode nodes.
Later patches will continue to replace X86ISD::SUBV_BROADCAST usage.
Differential Revision: https://reviews.llvm.org/D92645
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
Josh Stone