Summary:
This approach has two major advantages over the existing one:
1. We don't need to extend bitwidth in our computations. Extending
bitwidth is a big issue for compile time as we often end up working with
APInts wider than 64bit, which is a slow case for APInt.
2. When we zero extend a wrapped range, we lose some information (we
replace the range with [0, 1 << src bit width)). Thus, avoiding such
extensions better preserves information.
Correctness testing:
I ran 'ninja check' with assertions that the new implementation of
getRangeForAffineAR gives the same results as the old one (this
functionality is not present in this patch). There were several failures
- I inspected them manually and found out that they all are caused by
the fact that we're returning more accurate results now (see bullet (2)
above).
Without such assertions 'ninja check' works just fine, as well as
SPEC2006.
Compile time testing:
CTMark/Os:
- mafft/pairlocalalign -16.98%
- tramp3d-v4/tramp3d-v4 -12.72%
- lencod/lencod -11.51%
- Bullet/bullet -4.36%
- ClamAV/clamscan -3.66%
- 7zip/7zip-benchmark -3.19%
- sqlite3/sqlite3 -2.95%
- SPASS/SPASS -2.74%
- Average -5.81%
Performance testing:
The changes are expected to be neutral for runtime performance.
Reviewers: sanjoy, atrick, pete
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30477
llvm-svn: 297992
As the related tests show, we're not canonicalizing to this form for scalars or vectors yet,
but this solves the immediate problem in:
https://bugs.llvm.org/show_bug.cgi?id=32306
llvm-svn: 297989
This was discovered when running `llvm-pdbdump diff` against
two files, the second of which was generated by running the
first one through pdb2yaml and then yaml2pdb.
The second one was missing some bytes from the PDB Stream, and
tracking this down showed that at the end of the PDB Stream were
some additional bytes that we were ignoring. Looking back
to the reference code, these seem to specify some additional
flags that indicate whether the PDB supports various optional
features.
This patch adds support for reading, writing, and round-tripping
these flags through YAML and the raw dumper, and updates the
tests accordingly.
llvm-svn: 297984
This patch improves debug info quality in InstCombine by looking at
values that are about to be deleted, checking whether there are any
dbg.value instrinsics referring to them, and potentially encoding the
semantics of the deleted instruction into the dbg.value's
DIExpression.
In the example in the testcase (which was extracted from XNU) there is a sequence of
%4 = load %struct.entry*, %struct.entry** %next2, align 8, !dbg !41
%5 = bitcast %struct.entry* %4 to i8*, !dbg !42
%add.ptr4 = getelementptr inbounds i8, i8* %5, i64 -8, !dbg !43
%6 = bitcast i8* %add.ptr4 to %struct.entry*, !dbg !44
call void @llvm.dbg.value(metadata %struct.entry* %6, i64 0, metadata !20, metadata !21), !dbg 34
When these instructions are eliminated by instcombine one after
another, we can still salvage the otherwise dead debug info:
- Bitcasts have no effect, so have the dbg.value point to operand(0)
- Loads can be expressed via a DW_OP_deref
- Constant gep instructions can be replaced by DWARF expression arithmetic
The API introduced by this patch is not specific to instcombine and
can be useful in other places, too.
rdar://problem/30725338
Differential Revision: https://reviews.llvm.org/D30919
llvm-svn: 297971
Earlier stages of GlobalISel always use ConstantInt in G_CONSTANT so that's
what we should check for.
This fixes a crash introduced in r297782.
llvm-svn: 297968
Citing http://bugs.llvm.org/show_bug.cgi?id=32288
The DWARF generated by LLVM includes this location:
0x55 0x93 0x04 DW_OP_reg5 DW_OP_piece(4) When GCC's DWARF is simply
0x55 (DW_OP_reg5) without the DW_OP_piece. I believe it's reasonable
to assume the DWARF consumer knows which part of a register
logically holds the value (low bytes, high bytes, how many bytes,
etc) for a primitive value like an integer.
This patch gets rid of the redundant DW_OP_piece when a subregister is
at offset 0. It also adds previously missing subregister masking when
a subregister is followed by another operation.
(This reapplies r297960 with two additional testcase updates).
rdar://problem/31069390
https://reviews.llvm.org/D31010
llvm-svn: 297965
Citing http://bugs.llvm.org/show_bug.cgi?id=32288
The DWARF generated by LLVM includes this location:
0x55 0x93 0x04 DW_OP_reg5 DW_OP_piece(4) When GCC's DWARF is simply
0x55 (DW_OP_reg5) without the DW_OP_piece. I believe it's reasonable
to assume the DWARF consumer knows which part of a register
logically holds the value (low bytes, high bytes, how many bytes,
etc) for a primitive value like an integer.
This patch gets rid of the redundant DW_OP_piece when a subregister is
at offset 0. It also adds previously missing subregister masking when
a subregister is followed by another operation.
rdar://problem/31069390
https://reviews.llvm.org/D31010
llvm-svn: 297960
We can mark functions to always inline early in the opt. Since we do not have
call support this early inlining creates opportunities for inter-procedural
optimizations which would not occur otherwise.
Differential Revision: https://reviews.llvm.org/D31016
llvm-svn: 297958
in r297374.
I've extracted a small version of this from the C++ metaprogram Richard
came up with to exercise these kinds of issues and written comments to
describe both how to reproduce a fresh version of the test case and what
likely failure modes are.
The test case is still a bit brittle as it depends on the particular
inline cost modeling and SCC visitation order, but it definitely would
have caught the bug right away when developing things so it seems
a really valuable test case to have.
llvm-svn: 297935
Don't scalarize VSELECT->SETCC when operands/results needs to be widened,
or when the type of the SETCC operands are different from those of the VSELECT.
(VSELECT SETCC) and (VSELECT (AND/OR/XOR (SETCC,SETCC))) are handled.
The previous splitting of VSELECT->SETCC in DAGCombiner::visitVSELECT() is
no longer needed and has been removed.
Updated tests:
test/CodeGen/ARM/vuzp.ll
test/CodeGen/NVPTX/f16x2-instructions.ll
test/CodeGen/X86/2011-10-19-widen_vselect.ll
test/CodeGen/X86/2011-10-21-widen-cmp.ll
test/CodeGen/X86/psubus.ll
test/CodeGen/X86/vselect-pcmp.ll
Review: Eli Friedman, Simon Pilgrim
https://reviews.llvm.org/D29489
llvm-svn: 297930
This produces a 1% speedup on an important internal Google benchmark
(protocol buffers), with no other regressions in google or in the llvm
test-suite. Only 5 targets in the entire llvm test-suite are affected,
and on those 5 targets the size increase is 0.027%
llvm-svn: 297925
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
This patch adds the value profile support to profile the size parameter of
memory intrinsic calls: memcpy, memcmp, and memmov.
Differential Revision: http://reviews.llvm.org/D28965
llvm-svn: 297897
Together, these allow lldb-pdbdump to list all the modules from a PDB using a
native reader (rather than DIA).
Note that I'll probably be specializing NativeRawSymbol in a subsequent patch.
Differential Revision: https://reviews.llvm.org/D30956
llvm-svn: 297883
Currently, we create a G_CONSTANT for every "synthetic" integer
constant operand (for instance, for the G_GEP offset).
Instead, share the G_CONSTANTs we might have created by going through
the ValueToVReg machinery.
When we're emitting synthetic constants, we do need to get Constants from
the context. One could argue that we shouldn't modify the context at
all (for instance, this means that we're going to use a tad more memory
if the constant wasn't used elsewhere), but constants are mostly
harmless. We currently do this for extractvalue and all.
For constant fcmp, this does mean we'll emit an extra COPY, which is not
necessarily more optimal than an extra materialized constant.
But that preserves the current intended design of uniqued G_CONSTANTs,
and the rematerialization problem exists elsewhere and should be
resolved with a single coherent solution.
llvm-svn: 297875
computeKnownBits didn't handle fp_to_fp16 to report
the high bits as 0. ARM maps the generic node to an instruction
that does not modify the high bits of the register, so introduce
a target node where the high bits are known 0.
llvm-svn: 297873
If we got unlucky with register allocation and actual constpool placement, we
could end up producing a tTBB_JT with an index that's already been clobbered.
Technically, we might be able to fix this situation up with a MOV, but I think
the constant islands pass is complex enough without having to deal with more
weird edge-cases.
llvm-svn: 297871
Now that we preserve the IR layout, we would end up with all the newly
synthesized switch comparison blocks at the end of the function.
Instead, use a hopefully more reasonable layout, with the comparison
blocks immediately following the switch comparison blocks.
llvm-svn: 297869
It makes the output function layout more predictable; the layout has
an effect on performance, we don't want it to be at the mercy of the
translator's visitation order and such.
The predictable output is also easier to digest.
getOrCreateBB isn't appropriately named anymore, as it never needs to
create anything. Rename it and extract the MBB creation logic out of it.
A couple tests were sensitive to the order. Update them.
llvm-svn: 297868
Using the module ID here is wrong for a couple of reasons:
1) The module ID is not persisted, so we can end up with different
object file contents given the same input file (for example if the same
file is accessed via different paths).
2) With ThinLTO the module ID field may contain the path to a bitcode file,
which is incorrect, as the .file argument is supposed to contain the path to
a source file.
Differential Revision: https://reviews.llvm.org/D30584
llvm-svn: 297853
mfvrd and mffprd are both alias to mfvrsd.
This patch enables correct parsing of the aliases, but we still emit a mfvrsd.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29177
llvm-svn: 297849
Reduced from a mixture of PR32273 and David Green's test cases showing SelectionDAG::ComputeNumSignBits not correctly handling BUILD_VECTOR implicit truncation of inputs.
llvm-svn: 297847
This patch adds support for recognizing more patterns to match to DEXT and
CINS instructions.
It finds cases where multiple instructions could be replaced with a single
DEXT or CINS instruction.
For example, for the following:
define i64 @dext_and32(i64 zeroext %a) {
entry:
%and = and i64 %a, 4294967295
ret i64 %and
}
instead of generating:
0000000000000088 <dext_and32>:
88: 64010001 daddiu at,zero,1
8c: 0001083c dsll32 at,at,0x0
90: 6421ffff daddiu at,at,-1
94: 03e00008 jr ra
98: 00811024 and v0,a0,at
9c: 00000000 nop
the following gets generated:
0000000000000068 <dext_and32>:
68: 03e00008 jr ra
6c: 7c82f803 dext v0,a0,0x0,0x20
Cases that are covered:
DEXT:
1. and $src, mask where mask > 0xffff
2. zext $src zero extend from i32 to i64
CINS:
1. and (shl $src, pos), mask
2. shl (and $src, mask), pos
3. zext (shl $src, pos) zero extend from i32 to i64
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D30464
llvm-svn: 297832
Different MCInstrAnalysis classes for arm and thumb mode, each with
their own evaluateBranch implementation. I added a test case and
fixed the coff-relocations test to use '<label>:' rather than
'<label>' in the CHECK-LABEL entries, since the ones without the
colon would match branch targets. Might be worth noticing that
llvm-objdump does not lookup the relocation and thus assigns it a
target depending on the encoded immediate which #0, so it thinks it
branches to the next instruction.
Committed on behalf of Andre Vieira (avieira).
Differential Revision: https://reviews.llvm.org/D30943
llvm-svn: 297821
Enable the selection of the 64-bit signed multiply accumulate
instructions which operate on 16-bit operands. These are enabled for
ARMv5TE onwards for ARM and for V6T2 and other DSP enabled Thumb
architectures.
Differential Revision: https://reviews.llvm.org/D30044
llvm-svn: 297809
Summary: D25742 improved the precision of debug locations for PGO by removing debug locations from common tail when tail-merging. However, if identical insturctions that are merged into a common tail have the same debug locations, there's no need to remove them. This patch creates a merged debug location of identical instructions across SameTails and assign it to the instruction in the common tail, so that the debug locations are maintained if they are same across identical instructions.
Reviewers: aprantl, probinson, MatzeB, rob.lougher
Reviewed By: aprantl
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D30226
llvm-svn: 297805
On MachO platforms that use subsections-via-symbols dead code stripping will
drop prefix data. Unfortunately there is no great way to convey the relationship
between a function and its prefix data to the linker. We are forced to use a bit
of a hack: we give the prefix data it’s own symbol, and mark the actual function
entry an .alt_entry.
Patch by Moritz Angermann!
Differential Revision: https://reviews.llvm.org/D30770
llvm-svn: 297804
Summary:
<1 x Ty> is not a legal vector type in LLT, we shouldn’t build G_MERGE_VALUES
instruction for them.
Reviewers: qcolombet, aditya_nandakumar, dsanders, t.p.northover, ab, javed.absar
Reviewed By: qcolombet
Subscribers: dberris, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30948
llvm-svn: 297792
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
llvm-svn: 297780
On Solaris ld (and some other tools that use the underlying utility
libraries, such as elfdump) chokes on an archive library that has no
symbol table. The Solaris tools always create one, even if it's empty.
That bug has been fixed in the latest development line, and can
probably be backported to a supported release, but it would be nice if
LLVM's archiver could emit the empty symbol table, too.
Patch by Danek Duvall!
llvm-svn: 297773
Make MCSectionELF::AssociatedSection be a link to a symbol, because
that's how it works in the assembly, and use it in the asm printer.
llvm-svn: 297769
Summary:
In SamplePGO, if the profile is collected from non-LTO binary, and used to drive ThinLTO, the indirect call promotion may fail because ThinLTO adjusts local function names to avoid conflicts. There are two places of where the mismatch can happen:
1. thin-link prepends SourceFileName to front of FuncName to build the GUID (GlobalValue::getGlobalIdentifier). Unlike instrumentation FDO, SamplePGO does not use the PGOFuncName scheme and therefore the indirect call target profile data contains a hash of the OriginalName.
2. backend compiler promotes some local functions to global and appends .llvm.{$ModuleHash} to the end of the FuncName to derive PromotedFunctionName
This patch tries at the best effort to find the GUID from the original local function name (in profile), and use that in ICP promotion, and in SamplePGO matching that happens in the backend after importing/inlining:
1. in thin-link, it builds the map from OriginalName to GUID so that when thin-link reads in indirect call target profile (represented by OriginalName), it knows which GUID to import.
2. in backend compiler, if sample profile reader cannot find a profile match for PromotedFunctionName, it will try to find if there is a match for OriginalFunctionName.
3. in backend compiler, we build symbol table entry for OriginalFunctionName and pointer to the same symbol of PromotedFunctionName, so that ICP can find the correct target to promote.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30754
llvm-svn: 297757
This instruction was missing from the list of opcodes that we check, so we were
hitting an llvm_unreachable in ARMMCCodeEmitter.cpp for the ARM MOVT
instruction, rather than the diagnostic that is emitted for the other MOVW/MOVT
instructions.
Differential revision: https://reviews.llvm.org/D30936
llvm-svn: 297739
If it is possible for the RHS of a shift operation to be greater than or equal
to the bit-width, then the result might be undef, and we can't report any known
bits.
In some cases, this was allowing a transformation in instcombine which widened
an undef value from i1 to i32, increasing the range of values that a function
could return.
Differential revision: https://reviews.llvm.org/D30781
llvm-svn: 297724
Create nodes for smulwb and smulwt and move their selection from
DAGToDAG to DAG combine. smlawb and smlawt can then be selected
using tablegen. Added some helper functions to detect shift patterns
as well as a wrapper around SimplifyDemandBits. Added a couple of
extra tests.
Differential Revision: https://reviews.llvm.org/D30708
llvm-svn: 297716
Each Calling convention (CC) defines a static list of registers that should be preserved by a callee function. All other registers should be saved by the caller.
Some CCs use additional condition: If the register is used for passing/returning arguments – the caller needs to save it - even if it is part of the Callee Saved Registers (CSR) list.
The current LLVM implementation doesn’t support it. It will save a register if it is part of the static CSR list and will not care if the register is passed/returned by the callee.
The solution is to dynamically allocate the CSR lists (Only for these CCs). The lists will be updated with actual registers that should be saved by the callee.
Since we need the allocated lists to live as long as the function exists, the list should reside inside the Machine Register Info (MRI) which is a property of the Machine Function and managed by it (and has the same life span).
The lists should be saved in the MRI and populated upon LowerCall and LowerFormalArguments.
The patch will also assist to implement future no_caller_saved_regsiters attribute intended for interrupt handler CC.
Differential Revision: https://reviews.llvm.org/D28566
llvm-svn: 297715
getIntrinsicInstrCost() used to only compute scalarization cost based on types.
This patch improves this so that the actual arguments are checked when they are
available, in order to handle only unique non-constant operands.
Tests updates:
Analysis/CostModel/X86/arith-fp.ll
Transforms/LoopVectorize/AArch64/interleaved_cost.ll
Transforms/LoopVectorize/ARM/interleaved_cost.ll
The improvement in getOperandsScalarizationOverhead() to differentiate on
constants made it necessary to update the interleaved_cost.ll tests even
though they do not relate to intrinsics.
Review: Hal Finkel
https://reviews.llvm.org/D29540
llvm-svn: 297705
When checking if chain node is foldable, make sure the intermediate nodes have a single use across all results not just the result that was used to reach the chain node.
This recovers a test case that was severely broken by r296476, my making sure we don't create ADD/ADC that loads and stores when there is also a flag dependency.
llvm-svn: 297698
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
This reverts commit r242302. External type refs of this form were
never used by any LLVM frontend so this is effectively dead code.
(They were introduced to support clang module debug info, but in the
end we came up with a better design that doesn't use this feature at
all.)
rdar://problem/25897929
Differential Revision: https://reviews.llvm.org/D30917
llvm-svn: 297684
rL230225 made the assumption that only the lower 32-bits of an MMX register load is used as a shift value, when in fact the whole 64-bits are reloaded and treated as a i64 to determine the shift value.
This patch reverts rL230225 to ensure that the whole 64-bits of memory are folded and ensures that the upper 32-bit are zero'd for cases where the shift value has come from a scalar source.
Found during fuzz testing.
Differential Revision: https://reviews.llvm.org/D30833
llvm-svn: 297667
I am leaving the code in clang which filters mxcsr from the clobber list because that is still technically correct and will be useful again when the MXCSR register is reintroduced.
llvm-svn: 297664
This commit adds tail call support to the MachineOutliner pass. This allows
the outliner to insert jumps rather than calls in areas where tail calling is
possible. Outlined tail calls include the return or terminator of the basic
block being outlined from.
Tail call support allows the outliner to take returns and terminators into
consideration while finding candidates to outline. It also allows the outliner
to save more instructions. For example, in the X86-64 outliner, a tail called
outlined function saves one instruction since no return has to be inserted.
llvm-svn: 297653
For AVX-512 we force the input to zero if the input is undef or the mask is all ones to break an execution dependency. This patch brings the same behavior to AVX2.
llvm-svn: 297652
We were already forcing undef inputs to become a zero vector, this now catches an all ones mask too.
Ideally we'd use undef and let execution dep fix handle picking the best register/clearance for the undef, but I don't think it can handle the early clobber today.
llvm-svn: 297651
If raw_fd_ostream is constructed with the path of "-", it claims
ownership of the stdout file descriptor. This means that it closes
stdout when it is destroyed. If there are multiple users of
raw_fd_ostream wrapped around stdout, then a crash can occur because
of operations on a closed stream.
An example of this would be running something like "clang -S -o - -MD
-MF - test.cpp". Alternatively, using outs() (which creates a local
version of raw_fd_stream to stdout) anywhere combined with such a
stream usage would cause the crash.
The fix duplicates the stdout file descriptor when used within
raw_fd_ostream, so that only that particular descriptor is closed when
the stream is destroyed.
Patch by James Henderson!
llvm-svn: 297624
We used to hit an unreachable in getRegBankFromRegClass when dealing with the
stack pointer. This commit adds support for the GPRsp reg class.
llvm-svn: 297621
This reverts r297596.
There were other issues that were making this not work that have been fixed now. Reverting this results in a more accurate table.
llvm-svn: 297602
This exposed that we have several intrinsic instructions that have identical TSFlags to other instructions. We should merge their patterns and kill of the duplicate. I'll fix that in a follow up patch.
llvm-svn: 297596
The immediate should be 1 or 2, not 0 or 1. This was found while adding bounds checking to clang. In fact the existing clang builtin test failed if we ran it all the way to assembly.
llvm-svn: 297591
I noticed unnecessary 'sbb' instructions in D30472 and while looking at 'ptest' codegen recently.
This happens because we were transforming any 'setb' - even when we only wanted a single-bit result.
This patch moves those transforms under visitAdd/visitSub, so we we're only creating sbb/adc when it
is a win. I don't know why we need a SETCC_CARRY node type, but I'm not proposing to change that
existing behavior in this patch.
Also, I'm skeptical that sbb/adc are a win for all micro-arches, so I added comments to the test files
where this transform still fires.
The test changes here are all cases where we no longer produce sbb/adc. Avoiding partial register
stalls (generating an xor to clear a register) is not handled in some cases, but that's a separate
issue.
Differential Revision: https://reviews.llvm.org/D30611
llvm-svn: 297586
Summary:
A53 scheduler causes an assertion failure on all CRC instructions:
include/llvm/CodeGen/MachineInstr.h:280: const llvm::MachineOperand
&llvm::MachineInstr::getOperand(unsigned int) const: Assertion `i <
getNumOperands() && "getOperand() out of range!"' failed.
The case statements corresponding to CRC instructions are incorrect and should
be removed.
Also adding a testcase while on this.
Reviewers: t.p.northover, javed.absar, apazos, rengolin
Reviewed By: rengolin
Subscribers: evandro, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30274
llvm-svn: 297582
I'm pretty sure there are more problems lurking here. But I think this fixes PR32241.
I've added the test case from that bug and added asserts that will fail if we ever try to copy between high registers and mask registers again.
llvm-svn: 297574
Without SSE41 (pextrb) we currently extract byte elements from a vector by spilling to stack and reloading the byte.
This patch is an initial attempt at using MOVD/PEXTRW to extract the relevant DWORD/WORD from the vector and then shift+truncate to collect the correct byte.
Extraction of multiple bytes this way would result in code bloat, but as explained in the patch we could probably afford to be more aggressive with the supported extractions before again falling back on spilling - possibly through counting the number of extracts and which DWORD/WORD they originate?
Differential Revision: https://reviews.llvm.org/D29841
llvm-svn: 297568
Since v_max_f32_e64/v_max_f16_e64 can be folded if the target
instruction supports the clamp bit, we also need to maintain
modifiers when converting v_mac to v_mad.
This fixes a rendering issue with Dirt Rally because a v_mac
instruction with the clamp bit set was converted to a v_mad
but that bit was lost during the conversion.
Fixes: e184e01dd79 ("AMDGPU: Fold FP clamp as modifier bit")
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 297556
Summary:
This change solves the same problem as D30726, except that this only
throws out the bathwater.
AST was not correctly tracking and deleting UnknownInstructions via
handles. The existing code only tracks "pointers" in its
`ASTCallbackVH`, so an UnknownInstruction (that isn't also def'ing a
pointer used by another memory instruction) never gets a
`ASTCallbackVH`.
There are two other ways to solve this problem:
- Use the `PointerRec` scheme for both known and unknown instructions.
- Use a `CallbackVH` that erases the offending Instruction from the
UnknownInstruction list.
Both of the above changes seemed to be significantly (and unnecessarily
IMO) more complex than this.
Reviewers: chandlerc, dberlin, hfinkel, reames
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D30849
llvm-svn: 297539
This method inverts the Reason field of a scheduling candidate.
It does right comparison between RegCritical and RegExcess, but
everything else is broken. In fact it can prefer less strong reason
such as Weak over RegCritical because Weak > -RegCritical.
The CandReason enum is properly sorted, so just remove artificial
ranking.
Differential Revision: https://reviews.llvm.org/D30557
llvm-svn: 297536
This only requires a 64-bit memory source, not the whole 128-bits. But the 128-bit case is still supported via X86InstrInfo::foldMemoryOperandImpl
llvm-svn: 297523
This reverts r293386, r294027, r294029 and r296411.
Turns out the SLP tree isn't actually a "tree" and we don't handle
accessing the same packet of loads in several different orders well,
causing miscompiles.
Revert until we can fix this properly.
llvm-svn: 297493
SelectionDAG::ComputeNumSignBits is poor at build_vector handling, meaning that we can't see that all the vXi64 sources are in fact sign extended i32 or smaller.
llvm-svn: 297486
Summary:
Depends on D30379
This improves the state of things for the sub class of operation.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30436
llvm-svn: 297482
If we are transferring MMX registers to XMM for conversion we could use the MMX equivalents (CVTPI2PD + CVTPI2PS) without affecting rounding/exceptions etc.
llvm-svn: 297481
Summary: As per title. This is extracted from D29872 and I threw SADDO in.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30379
llvm-svn: 297479
If we are transferring XMM conversion results to MMX registers we could use the MMX equivalents (CVTPD2PI/CVTTPD2PI + CVTPS2PI/CVTTPS2PI) with affecting rounding/expections etc.
llvm-svn: 297476
This patches teaches the MIPS backend to accept more values for constant
splats. Previously, only 10 bit signed immediates or values that could be
loaded using an ldi.[bhwd] instruction would be acceptted. This patch relaxes
that constraint so that any constant value that be splatted is accepted.
As a result, the constant pool is used less for vector operations, and the
suite of bit manipulation instructions b(clr|set|neg)i can now be used with
the full range of their immediate operand.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30640
llvm-svn: 297457
Summary:
This is a continuation of D28861. Add an SMLoc to MCUnaryExpr such that
a better diagnostic can be given in case of an error in later stages of
assembling.
Reviewers: rengolin, grosbach, javed.absar, olista01
Reviewed By: olista01
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30581
llvm-svn: 297454
All MIPS .debug_* sections should be marked with ELF type SHT_MIPS_DWARF
accordingly the specification [1]. Also the same section type is assigned
to these sections by GNU tools.
[1] ftp.software.ibm.com/software/os390/czos/dwarf/mips_extensions.pdf
Differential Revision: https://reviews.llvm.org/D29789
llvm-svn: 297447
GAS supports specification of section header's type using a numeric
value [1]. This patch brings the same functionality to LLVM. That allows
to setup some target-specific section types belong to the SHT_LOPROC -
SHT_HIPROC range. If we attempt to print unknown section type, MCSectionELF
class shows an error message. It's better than print sole '@' sign
without any section type name.
In case of MIPS, example of such section's type is SHT_MIPS_DWARF.
Without the patch we will have to implement some workarounds
in probably not-MIPS-specific part of code base to convert SHT_MIPS_DWARF
to the @progbits while printing assembly and to assign SHT_MIPS_DWARF for
@progbits sections named .debug_* if we encounter such section in
an input assembly.
[1] https://sourceware.org/binutils/docs/as/Section.html
Differential Revision: https://reviews.llvm.org/D29719
llvm-svn: 297446
same as already done for ARM and Thumb2.
Reviewers: jmolloy, rogfer01, efriedma
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30400
llvm-svn: 297443
Summary: This essentially does the same transform as for ADC.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30417
llvm-svn: 297416
Michael Kuperstein