This requires adding a few more expression types, but is already a small
simplification. Having Writer.cpp know the exact expression will also
allow further simplifications.
llvm-svn: 266604
* Do script driven layout only if SECTIONS section exist.
Initial commit message:
[ELF] - Implemented basic location counter support.
This patch implements location counter support.
It also separates assign addresses for sections to assignAddressesScript() if it scipt exists.
Main testcase is test/ELF/linkerscript-locationcounter.s, It contains some work with location counter. It is basic now.
Implemented location counter assignment and '+' operations.
Patch by myself with LOTS of comments and design suggestions from Rui Ueyama.
Differential revision: http://reviews.llvm.org/D18499
llvm-svn: 266526
This patch implements location counter support.
It also separates assign addresses for sections to assignAddressesScript() if it scipt exists.
Main testcase is test/ELF/linkerscript-locationcounter.s, It contains some work with location counter. It is basic now.
Implemented location counter assignment and '+' operations.
Patch by myself with LOTS of comments and design suggestions from Rui Ueyama.
Differential revision: http://reviews.llvm.org/D18499
llvm-svn: 266457
The _gp_disp symbol designates offset between start of function and 'gp'
pointer into GOT. The following code is a typical MIPS function preamble
used to setup $gp register:
lui $gp, %hi(_gp_disp)
addi $gp, $gp, %lo(_gp_disp)
To calculate R_MIPS_HI16 / R_MIPS_LO16 relocations results we use
the following formulas:
%hi(_gp - P + A)
%lo(_gp - P + A + 4),
where _gp is a value of _gp symbol, A is addend, and P current address.
The R_MIPS_LO16 relocation references _gp_disp symbol is always the second
instruction. That is why we need four byte adjustments. The patch assigns
R_PC type for R_MIPS_LO16 relocation and adjusts its addend by 4. That fix
R_MIPS_LO16 calculation.
For details see p. 4-19 at ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
Differential Revision: http://reviews.llvm.org/D19115
llvm-svn: 266368
We never need to iterate over the K,V pairs, so we can avoid copying the
key as MapVector does.
This is a small speedup on most benchmarks.
llvm-svn: 266364
That was removed in r266304, but leads to warnings by Clang.
Thanks to Rafael Espíndola for pointing on that.
Though I think change was legal from point of C++.
llvm-svn: 266306
They are unnecessary, as the dynamic loader can apply the original relocations
directly. This was also resulting in the creation of copy relocations in PIEs.
Differential Revision: http://reviews.llvm.org/D19089
llvm-svn: 266273
This simplifies the code by allowing us to remove the visibility argument
to functions that create synthetic symbols.
The only functional change is that the visibility of the MIPS "_gp" symbol
is now hidden. Because this symbol is defined in every executable or DSO, it
would be difficult to observe a visibility change here.
Differential Revision: http://reviews.llvm.org/D19033
llvm-svn: 266208
We need to ensure that the address of an undefined weak symbol evaluates to
zero. We were getting this right for non-PIC executables (where the symbol
can be evaluated directly) and for DSOs (where we emit a symbolic relocation
for these symbols, as they are preemptible). But we weren't getting it right
for PIEs. Probably the simplest way to ensure that these symbols evaluate
to zero is by not creating a relocation in .got for them.
Differential Revision: http://reviews.llvm.org/D19044
llvm-svn: 266161
With this patch we use the first scan over the relocations to remember
the information we found about them: will them be relaxed, will a plt be
used, etc.
With that the actual relocation application becomes much simpler. That
is particularly true for the interfaces in Target.h.
This unfortunately means that we now do two passes over relocations for
non SHF_ALLOC sections. I think this can be solved by factoring out the
code that scans a single relocation. It can then be used both as a scan
that record info and for a dedicated direct relocation of non SHF_ALLOC
sections.
I also think it is possible to reduce the number of enum values by
representing a target with just an OutputSection and an offset (which
can be from the start or end).
This should unblock adding features like relocation optimizations.
llvm-svn: 266158
The _gp* family of symbols is defined as an offset in .got, and it is
not at all clear what should happen when .got is not defined.
This will allow some simplifications on how these symbols are handled.
llvm-svn: 266063
It is possible that the same symbol referenced by two kinds of
relocations at the same time. The first type requires say GOT entry
creation, the second type requires dynamic copy relocation. For MIPS
targets they might be R_MIPS_GOT16 and R_MIPS_HI16 relocations. For X86
target they might be R_386_GOT32 and R_386_32 respectively.
Now LLD never creates GOT entry for a symbol if this symbol already has
related copy relocation. This patch solves this problem.
Differential Revision: http://reviews.llvm.org/D18862
llvm-svn: 265910
Now MustBeInDynSym is only true if the symbol really must be in the
dynamic symbol table.
IsUsedInRegularObj is only true if the symbol is used in a .o or -u. Not
a .so or a .bc.
A benefit is that this is now done almost entirilly during symbol
resolution. The only exception is copy relocations because of aliases.
This includes a small fix in that protected symbols in .so don't force
executable symbols to be exported.
This also opens the way for implementing internalize for -shared.
llvm-svn: 265826
Previously, we supported only one hash function, FNV-1, so
BuildIdSection directly handled hash computation. In this patch,
I made BuildIdSection an abstract class and defined two subclasses,
BuildIdFnv1 and BuildIdMd5.
llvm-svn: 265737
This requires knowing input section offsets in output sections before
scanRelocs. This is generally a good thing and should allow further
simplifications in the creation of dynamic relocations.
llvm-svn: 265673
We have to differentiate undefined symbols from bitcode and undefined
symbols from other sources.
Undefined symbols from bitcode should not inhibit the symbol being
internalized. Undefined symbols from other sources should.
llvm-svn: 265536
ELF and program header are not part of OutputSections list anymore.
That helps to avoid having and working with functions like dummySectionsNum().
Still keeping them as sections helps to simplify the code.
Differential revision: http://reviews.llvm.org/D18743
llvm-svn: 265522
Where Clang's AArch64 backend seems to differ from the X86 backend is
that it tends to use the GOT more aggressively.
After getting CloudABI PIEs working on x86-64, I noticed that accessing
global variables would still crash on aarch64. Tracing it down, it turns
out that the GOT was filled with entries assuming the base address was
zero.
It turns out that we skip generating relocations for GOT entries in case
the relocation pointing towards the GOT is relative. Whether the thing
pointing to the GOT is absolute or relative shouldn't make any
difference; the GOT entry itself should contain the absolute address,
thus needs a relocation regardless.
Approved by: rafael
Differential Revision: http://reviews.llvm.org/D18739
llvm-svn: 265453
For each copy relocation that we create, look through the DSO's symbol table
for aliases and create a dynamic symbol for each one. This causes the copy
relocation to correctly interpose any aliases.
Copy relocations are relatively uncommon (on my machine, 56% of binaries in
/usr/bin have no copy relocations probably due to being PIEs, 97% of them
have <10, and the binary with the largest number of them has 97) so it's
probably fine to do this in a relatively inefficient way.
Differential Revision: http://reviews.llvm.org/D18731
llvm-svn: 265354
Our symbol representation was redundant, and some times would get out of
sync. It had an Elf_Sym, but some fields were copied to SymbolBody.
Different parts of the code were checking the bits in SymbolBody and
others were checking Elf_Sym.
There are two general approaches to fix this:
* Copy the required information and don't store and Elf_Sym.
* Don't copy the information and always use the Elf_Smy.
The second way sounds tempting, but has a big problem: we would have to
template SymbolBody. I started doing it, but it requires templeting
*everything* and creates a bit chicken and egg problem at the driver
where we have to find ELFT before we can create an ArchiveFile for
example.
As much as possible I compared the test differences with what gold and
bfd produce to make sure they are still valid. In most cases we are just
adding hidden visibility to a local symbol, which is harmless.
In most tests this is a small speedup. The only slowdown was scylla
(1.006X). The largest speedup was clang with no --build-id, -O3 or
--gc-sections (i.e.: focus on the relocations): 1.019X.
llvm-svn: 265293
Extracts code for initializing dummies sections
to avoid possible duplication in following patches.
Differential review: http://reviews.llvm.org/D18691
llvm-svn: 265159
Some functions in Writer reports error using HasError, and some reports
their return values. This patch makes them to consistently use HasError.
llvm-svn: 265156
fixAbsoluteSymbols fixes linker-created symbol addresses. Since we don't
create such symbols for relocatable output, we don't need to call this
function.
llvm-svn: 265154
assignAddressesRelocatable function did not set addresses to sections
despite its name. What it actually did is to set file offsets to sections.
assignAddresses function assigned addresses and file offsets to sections.
So there was a confusion what they were doing, and they had duplicate code.
This patch separates file offset assignments from address assignments.
A new function, assignFileOffsets assign file offsets. assignAddresses
do not care about file offsets anymore.
llvm-svn: 265151
The extra fix is to note that it still requires copy relocations.
Original message:
Change how we handle R_MIPS_LO16.
Mips aligns PT_LOAD to 16 bits (0x10000). That means that the lower 16
bits are always the same, so we can, effectively, say that the
relocation is relative.
P.S.: Suggestions for a better name for the predicate are welcome :-)
llvm-svn: 265150
That is consistent with other symbols: _edata, _etext
and can help to avoid duplicate code.
Differential revision: http://reviews.llvm.org/D18655
llvm-svn: 265129
Some targets might require creation of thunks. For example, MIPS targets
require stubs to call PIC code from non-PIC one. The patch implements
infrastructure for thunk code creation and provides support for MIPS
LA25 stubs. Any MIPS PIC code function is invoked with its address
in register $t9. So if we have a branch instruction from non-PIC code
to the PIC one we cannot make the jump directly and need to create a small
stub to save the target function address.
See page 3-38 ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
- In relocation scanning phase we ask target about thunk creation necessity
by calling `TagetInfo::needsThunk` method. The `InputSection` class
maintains list of Symbols requires thunk creation.
- Reassigning offsets performed for each input sections after relocation
scanning complete because position of each section might change due
thunk creation.
- The patch introduces new dedicated value for DefinedSynthetic symbols
DefinedSynthetic::SectionEnd. Synthetic symbol with that value always
points to the end of the corresponding output section. That allows to
escape updating synthetic symbols if output sections sizes changes after
relocation scanning due thunk creation.
- In the `InputSection::writeTo` method we write thunks after corresponding
input section. Each thunk is written by calling `TargetInfo::writeThunk` method.
- The patch supports the only type of thunk code for each target. For now,
it is enough.
Differential Revision: http://reviews.llvm.org/D17934
llvm-svn: 265059
If we make R_MIPS_LO16 a relative relocation, linker:
- never creates R_MIPS_COPY relocation for it
- attempts to create R_MIPS_REL32 dynamic relocation if R_MIPS_LO16's
target is a preemptible symbol
Differential Revision: http://reviews.llvm.org/D18607
llvm-svn: 264956
gold and bfd do not include the undefined locals in symtab.
We have no reasons to support that either.
That fixes PR27016
Differential revision: http://reviews.llvm.org/D18554
llvm-svn: 264843
Mips aligns PT_LOAD to 16 bits (0x10000). That means that the lower 16
bits are always the same, so we can, effectively, say that the
relocation is relative.
llvm-svn: 264761
When a tls access is optimized, a group of relocations is converted at a
time.
We were already skipping relocations that were optimized out in
relocate, but not in scanRelocs.
This is a small optimization. I got here while working on a patch that
will always keep scanRelocs and relocate in sync.
llvm-svn: 264048
Now local symbols have SymbolBody so we can handle all kind of symbols
in the GotSection::addEntry method. The patch moves the code from
addMipsLocalEntry to addEntry. NFC.
Differential Revision: http://reviews.llvm.org/D18302
llvm-svn: 264032
-pie
--pic-executable
Create a position independent executable. This is currently only
supported on ELF platforms. Position independent executables are
similar to shared libraries in that they are relocated by the
dynamic linker to the virtual address the OS chooses for them
(which can vary between invocations). Like normal dynamically
linked executables they can be executed and symbols defined in the
executable cannot be overridden by shared libraries.
Differential revision: http://reviews.llvm.org/D18183
llvm-svn: 263693
We want to make SymbolBody the central place to query symbol information.
This patch also renames canBePreempted to isPreemptible because I feel that
the latter is slightly better (the former is three words and the latter
is two words.)
llvm-svn: 263386
error returned true if there was an error. This allows us to replace
the code like this
if (EC) {
error(EC, "something failed");
return;
}
with
if (error(EC, "something failed"))
return;
I thought that that was a good idea, but it turned out that we only
have two places to use this pattern. So this patch removes that feature.
llvm-svn: 263362
At least Linux has the kernel configuration to include the first page
of the executable into core files. We want build ID section to be
included in core files to identify them.
Here is the link to the description about the kernel configuration.
097f70b3c4/fs/Kconfig.binfmt (L46)
llvm-svn: 263351
This patch implements --build-id. After the linker creates an output file
in the memory buffer, it computes the FNV1 hash of the resulting file
and set the hash to the .note section as a build-id.
GNU ld and gold have the same feature, but their default choice of the
hash function is different. Their default is SHA1.
We made a deliberate choice to not use a secure hash function for the
sake of performance. Computing a secure hash is slow -- for example,
MD5 throughput is usually 400 MB/s or so. SHA1 is slower than that.
As a result, if you pass --build-id to gold, then the linker becomes about
10% slower than that without the option. We observed a similar degradation
in an experimental implementation of build-id for LLD. On the other hand,
we observed only 1-2% performance degradation with the FNV hash.
Since build-id is not for digital certificate or anything, we think that
a very small probability of collision is acceptable.
We considered using other signals such as using input file timestamps as
inputs to a secure hash function. But such signals would have an issue
with build reproducibility (if you build a binary from the same source
tree using the same toolchain, the build id should become the same.)
GNU linkers accepts --build-id=<style> option where style is one of
"MD5", "SHA1", or an arbitrary hex string. That option is out of scope
of this patch.
http://reviews.llvm.org/D18091
llvm-svn: 263292
It was discussed to make all messages be
lowercase to be consistent with clang.
(also reverts the r263128 which fixed
build bot fail after r263125)
Original commit message:
[ELF] - Consistent spelling for error/warning messages
Previously error and warnings were not consistent in lld.
Some of them started from lowercase letter, others from
uppercase. Also there was one or two which had a dot at the end.
This patch changes all messages to start from uppercase letter if
they were not before.
Differential revision: http://reviews.llvm.org/D18045
llvm-svn: 263240
We can argue about a maximum alignment of a group of symbols,
but for each symbol, there is only one alignment.
So it is a bit weird that each symbol has a "maximum alignment".
llvm-svn: 263151
Previously error and warnings were not consistent in lld.
Some of them started from lowercase letter, others from
uppercase. Also there was one or two which had a dot at the end.
This patch changes all messages to start from uppercase letter if
they were not before.
Differential revision: http://reviews.llvm.org/D18045
llvm-svn: 263125
It was a badly specified hack for when a tls relocation should be
propagated to the dynamic relocation table.
This replaces it with a not as bad hack of saying that a local dynamic
tls relocation is never preempted.
I will try to remove even that second hack in the next patch.
llvm-svn: 262955
The variables corresponding to command line options are named mechanically.
Because the option for the variable is -noinhibit-exec and not -no-inhibit-exec,
it should be name this way.
llvm-svn: 262911
Get rid of few accessors in that class, and replace
them with direct fields access.
Differential revision: http://reviews.llvm.org/D17879
llvm-svn: 262796
Patch changes all relocations types to be uint32_t and also
fixes some dependent inconsistency in callers code.
Differential revision: http://reviews.llvm.org/D17882
llvm-svn: 262793
The rules for when we can relax tls relocations are target independent.
The only things that are target dependent are the relocation values.
llvm-svn: 262748
SymbolBody constructor and friends take isFunc and isTLS boolean arguments.
ELF symbols have already a type so than be easily passed as argument.
If we want to support another type, this scheme is not good enough, that is,
the current code logic would require passing another `bool isObject` around.
Up to two argument, this stretching exercise was a little bit goofy but
still acceptable, but with more types to support, is just too much, IMHO.
Change the code so that the type is passed instead.
Differential Revision: http://reviews.llvm.org/D17871
llvm-svn: 262684
When generating relocatable output SHT_NOBITS sections
were still occupy the file space.
Differential revision: http://reviews.llvm.org/D17857
llvm-svn: 262650
There was a known limitation for -r option:
relocations against local symbols were not supported.
For example rel[a].eh_frame sections contained relocations against sections
and that was not supported for -r before. Patch fixes that.
Differential review: http://reviews.llvm.org/D17813
llvm-svn: 262590
As was suggested in mails, this patch implements edata/etext
symbols in a more direct way.
It iterates through PT_LOADs.
Result seems to be the same and equal to gold output.
Differential revision: http://reviews.llvm.org/D17755
llvm-svn: 262369
__start_/__end_ <section-name> symbols and other specials like:
preinit_array_start/end
init_array_start/end
fini_array_start/end
should not be created by linker when creating relocatable files.
Differential revision: http://reviews.llvm.org/D17774
llvm-svn: 262366
Regarding the comment, it is out of context because it describes
what it does not do there. It got too long because it was originally
two different comments that were simply merged together.
The semantics is described in fixAbsoluteSymbols, so we don't need it.
llvm-svn: 262031
https://docs.oracle.com/cd/E53394_01/html/E54766/u-etext-3c.html
It is said that:
_etext - The address of _etext is the first
location after the last read-only loadable segment.
_edata - The address of _edata is the first
location after the last read-write loadable segment.
_end - If the address of _edata is greater than the address
of _etext, the address of _end is same as the address of _edata.
In real life _end and _edata has different values for that case.
Both gold/bfd set _edata to the end of the last non SHT_NOBITS section.
This patch do the same for consistency.
It should fix the https://llvm.org/bugs/show_bug.cgi?id=26729.
Differential revision: http://reviews.llvm.org/D17601
llvm-svn: 262019
For shared libraries we allow any weak undefined symbol to eventually be
resolved, even if we never see a definition in another .so. This matches
the behavior when handling other undefined symbols in a shared library.
For executables, we require seeing a definition in a .so or resolve it
to zero. This is also similar to how non weak symbols are handled.
llvm-svn: 262017
-r, -relocatable - Generate relocatable output
Currently does not have support for files containing
relocation sections with entries that refer to local
symbols (like rel[a].eh_frame which refer to sections
and not to symbols)
Differential revision: http://reviews.llvm.org/D14382
llvm-svn: 261838
"Discarded" section is a marker for discarded sections, and we do not
use the instance except for checking its identity. In that sense, it
is just another type of a "null" pointer for InputSectionBase. So,
it doesn't have to be a real instance of InputSectionBase class.
In this patch, we no longer instantiate Discarded section but instead
use -1 as a pointer value. This eliminates a global variable which
needed initialization at startup.
llvm-svn: 261761
There is nothing aarch64 specific in here. If a symbol can be preempted,
we need to copy the full relocation to the dynamic linker.
If a symbol cannot be preempted, we can make the dynamic linker life
easier and produce a relative relocation.
This is directly equivalent to R_X86_64_64 to R_x86_64_RELATIVE
conversion.
llvm-svn: 261678
The .tbss section is in the middle of a PT_LOAD. Whatever treatment we
give to its address we must also give to the offset.
We were ignoring it for address computations, but not for offset.
Fixes pr26712.
llvm-svn: 261667
This patch fixes the R_AARCH64_ABS64 relocation when used in shared mode,
where it requires a dynamic R_AARCH64_RELATIVE relocation. To correct set
the addend on the dynamic relocation (since it will be used by the dynamic
linker), a new TargetInfo specific hook was created (getDynRelativeAddend)
to get the correct addend based on relocation type.
The patch fixes the issues when creating shared library code against
{init,fini}_array, where it issues R_AARCH64_ABS64 relocation against
local symbols.
llvm-svn: 261651
This reduces the .rodata of scyladb from 4501932 to 4334639 bytes (1.038
times smaller).
I don't think it is critical to support tail merging, just exact
duplicates, but given the code organization it was actually a bit easier
to support both.
llvm-svn: 261327
Previously, we added garbage-collected symbols to the symbol table
and filter them out when we were writing symbols to the file. In
this patch, garbage-collected symbols are filtered out from beginning.
llvm-svn: 261064
Each rule in SECTIONS commands is something like ".foo *(.baz.*)",
which instructs the linker to collect all sections whose name matches
".baz.*" from all files and put them into .foo section.
Previously, we didn't recognize the wildcard character. This patch
adds that feature.
Performance impact is a bit concerning because a linker script can
contain hundreds of SECTIONS rules, and doing pattern matching against
each rule would be too expensive. We could merge all patterns into
single DFA so that it takes O(n) to the input size. However, it is
probably too much at this moment -- we don't know whether the
performance of pattern matching matters or not. So I chose to
implement the simplest algorithm in this patch. I hope this simple
pattern matcher is sufficient.
llvm-svn: 260745
Previously, we had code for linker scripts in Writer. This patch
separates that as LinkerScript class. The class provides a few
functions to query linker scripts and is also a container of some
linker-script-specific information.
Hopefully, Writer will only implement the default behavior and let
the new class handle gotchas regarding linker scripts.
llvm-svn: 260591
R_X86_64_TPOFF64 is a dynamic relocation,
it should not appear in static relocation processing.
Patch fixes it.
Differential revision: http://reviews.llvm.org/D16880
llvm-svn: 260508
They don't count for the memory or file size, so this is mostly just a
simplification.
The only noticeable difference should be fewer empty program headers.
llvm-svn: 260465
IMHO this makes the code easier to read and should help with linker
scripts.
This is strongly based on D16575. The main differences are:
We record a range of sections, not every section in a program header.
scanHeaders takes case of deciding what goes in every program header,
including PT_GNU_RELRO
We create dummy sections for the start of the file
With this, program header creation has 3 isolated stages:
Map sections to program headers.
Assign addresses to *sections*
Looking at sections find the address and size of each program header.
Thanks to George Rimar for the initial version.
llvm-svn: 260453
This is the function equivalent of a copy relocation.
Since functions are expected to change sizes, we cannot use copy
relocations. In situations where one would be needed, what is done
instead is:
* Create a plt entry
* Output an undefined symbol whose addr is the plt entry.
The dynamic linker makes sure any shared library uses the plt entry as
the function address.
llvm-svn: 260224
Previously, it was easy to leave some Out<ELFT> fields uninitialized
because assignments to the fields are mixed with output section
instantiations. In this patch, I separate initializations from assignments
to improve readability.
http://reviews.llvm.org/D16864
llvm-svn: 259899
The variable was marking various cases where a symbol must be included
in the dynamic symbol table. Being used by a dynamic relocation was only
one of them.
llvm-svn: 259889
The previous names contained "Local" and "Current", but what we
are handling is always local and current, so they were redundant.
TlsIndex comes from "tls_index" struct that Ulrich Drepper is using
in this document to describe this data structure in GOT.
llvm-svn: 259852
Another case where we currently have almost duplicated code is the
creation of dynamic relocations. First to decide if we need one, then to
decide what to write.
This patch fixes it by passing more information from the relocation scan
to the section writing code. This is the same idea used for r258723.
I actually think it should be possible to simplify this further by
reordering things a bit in the writer. For example, we should be able to
represent almost every position in the file with an OutputSeciton and
offset. When writing it out we then just need to add the offset to the
OutputSection VA.
llvm-svn: 259829
Symbol does not need an entry i the 'global' part of GOT if it cannot be
preempted. So canBePreempted fully satisfies us at least for now.
llvm-svn: 259779
If relocation against symbol requires GOT entry creation and this symbol
is defined in DSO, the GOT entry should be created in the 'global' part
of the GOT even if we link executable file. Also we do not need to create
a dynamic symbol table entry for global symbol corresponding to the
local GOT entry.
llvm-svn: 259778
It can fail to open an output file for various reasons, including
lack of permission, too long filename, or the output file is not
a mmap'able file.
llvm-svn: 259596
Some dynamic table tags like RELSZ and PLTRELSZ depens on result of
finalizing corresponding relocation sections. Therefore we have to
finalize .dynamic section at the end.
Differential Revision: http://reviews.llvm.org/D16799
llvm-svn: 259478
Instead of leave unused fields as is, set them to nullptr.
Currnetly this is NFC, but if you call writeResults more than
once, you should be able to see the difference.
llvm-svn: 259444
Previously, the methods to get symbol addresses were somewhat scattered
in many places. You can use getEntryAddr returns the address of the symbol,
but if you want to get the GOT address for the symbol, you needed to call
Out<ELFT>::Got->getEntryAddr(Sym). This change adds new functions, getVA,
getGotVA, getGotPltVA, and getPltVA to SymbolBody, so that you can use
SymbolBody as the central place to ask about symbols.
http://reviews.llvm.org/D16710
llvm-svn: 259404
This avoids the need to have reserve and addString in sync.
We avoid hashing the global symbols again. This means that we don't
merge a global symbol that has the same name as some other string, but
that doesn't seem very common. The string table size is the same in
clang an scylladb with or without hashing global symbols again.
llvm-svn: 259136
This function is a predicate that a given relocation can be relaxed.
The previous name implied that it returns true if a given relocation
has already been optimized away.
llvm-svn: 259128
In many situations, we don't want to exit at the first error even in the
process model. For example, it is better to report all undefined symbols
rather than reporting the first one that the linker picked up randomly.
In order to handle such errors, we don't need to wrap everything with
ErrorOr (thanks for David Blaikie for pointing this out!) Instead, we
can set a flag to record the fact that we found an error and keep it
going until it reaches a reasonable checkpoint.
This idea should be applicable to other places. For example, we can
ignore broken relocations and check for errors after visiting all relocs.
In this patch, I rename error to fatal, and introduce another version of
error which doesn't call exit. That function instead sets HasError to true.
Once HasError becomes true, it stays true, so that we know that there
was an error if it is true.
I think introducing a non-noreturn error reporting function is by itself
a good idea, and it looks to me that this also provides a gradual path
towards lld-as-a-library (or at least embed-lld-to-your-program) without
sacrificing code readability with lots of ErrorOr's.
http://reviews.llvm.org/D16641
llvm-svn: 259069
There are a few cases where we have almost duplicated code.
This patches fixes the simplest: the finalize and write of dynamic
section. Right now they have to have exactly the same structure to
decide if a DT_* entry is needed and then to actually write it.
We cannot just write it to a std::vector in the first pass since
addresses have not been computed yet.
llvm-svn: 258723
Summary: It looks like this snuck through in r256143/D15383.
Reviewers: ruiu, grimar
Differential Revision: http://reviews.llvm.org/D16500
llvm-svn: 258599
Code for handling TLS relocations was moved out scanRelocs() to new function handleTlsRelocations().
That is because scanRelocs already too large to put more TLS code into it.
Differential revision: http://reviews.llvm.org/D16354
llvm-svn: 258392
Some MIPS relocation (for now R_MIPS_GOT16) requires creation of GOT
entries for symbol not included in the dynamic symbol table. They are
local symbols and non-local symbols with 'local' visibility. Local GOT
entries occupy continuous block between GOT header and regular GOT
entries.
The patch adds initial support for handling local GOT entries. The main
problem is allocating local GOT entries for local symbols. Such entries
should be initialized by high 16-bit of the symbol value. In ideal world
there should be no duplicated entries with the same values. But at the
moment of the `Writer::scanRelocs` call we do not know a value of the
symbol. In this patch we create new local GOT entry for each relocation
against local symbol, though we can exhaust GOT quickly. That needs to
be optimized later. When we calculate relocation we know a final symbol
value and request local GOT entry index. To do that we maintain map
between addresses and local GOT entry indexes. If we start to calculate
relocations in parallel we will have to serialize access to this map.
Differential Revision: http://reviews.llvm.org/D16324
llvm-svn: 258388
Added check for terminator CIE/FDE which has zero data size.
void EHOutputSection<ELFT>::addSectionAux(
...
// If CIE/FDE data length is zero then Length is 4, this
// shall be considered a terminator and processing shall end.
if (Length == 4)
break;
...
After this "Bug 25923 - lld/ELF2 linked application crashes if exceptions were used." is fixed for me. Self link of clang also works.
Initial commit message:
[ELF] - implemented --eh-frame-hdr command line option.
--eh-frame-hdr
Request creation of ".eh_frame_hdr" section and ELF "PT_GNU_EH_FRAME" segment header.
Both gold and the GNU linker support an option --eh-frame-hdr which tell them to construct a header for all the .eh_frame sections. This header is placed in a section named .eh_frame_hdr and also in a PT_GNU_EH_FRAME segment. At runtime the unwinder can find all the PT_GNU_EH_FRAME segments by calling dl_iterate_phdr.
This section contains a lookup table for quick binary search of FDEs.
Detailed info can be found here:
http://www.airs.com/blog/archives/462
Differential revision: http://reviews.llvm.org/D15712
llvm-svn: 257889
MIPS ABI has relocations like R_MIPS_JALR which is just a hint for
linker to make some code optimization. Such relocations should not be
handled as a regular ones and lead to say dynamic relocation creation.
The patch introduces new virtual `Target::isHintReloc` method, overrides
it in the `MipsTargetInfo` class and calls it in the `Writer<ELFT>::scanRelocs`
method.
Differential Revision: http://reviews.llvm.org/D16193
llvm-svn: 257798
--eh-frame-hdr
Request creation of ".eh_frame_hdr" section and ELF "PT_GNU_EH_FRAME" segment header.
Both gold and the GNU linker support an option --eh-frame-hdr which tell them to construct a header for all the .eh_frame sections. This header is placed in a section named .eh_frame_hdr and also in a PT_GNU_EH_FRAME segment. At runtime the unwinder can find all the PT_GNU_EH_FRAME segments by calling dl_iterate_phdr.
This section contains a lookup table for quick binary search of FDEs.
Detailed info can be found here:
http://www.airs.com/blog/archives/462
Differential revision: http://reviews.llvm.org/D15712
llvm-svn: 257753
MIPS _gp_disp designates offset between start of function and gp pointer
into GOT therefore any relocations against it do not require dynamic
relocation.
llvm-svn: 257492
On MIPS O32 ABI, _gp_disp is a magic symbol designates offset between
start of function and gp pointer into GOT. To make seal with such symbol
we add new method addIgnoredStrong(). It adds ignored symbol with global
binding to prevent the symbol substitution. The addIgnored call is not
enough here because this call adds a weak symbol which might be
substituted by symbol from shared library.
Differential Revision: http://reviews.llvm.org/D16084
llvm-svn: 257449
Summary: This will allow us to remove the AMDGPU support from old ELF.
Reviewers: rafael, ruiu
Differential Revision: http://reviews.llvm.org/D15895
llvm-svn: 257023
String tables in unstripped executable files are fairly large in size.
For example, lld's executable file is about 34.4 MB in my environment,
and of which 3.5 MB is the string table. Efficiency of string table
construction matters.
Previously, the string table was built in an inefficient way. We used
StringTableBuilder to build that and enabled string tail merging,
although tail merging is not effective for the symbol table (you can
only make the string table 0.3% smaller for lld.) Tail merging is
computation intensive task and slow.
This patch eliminates string tail merging.
I changed the way of adding strings to the string table in this patch
too. Previously, strings were added using add() and the same strings
were then passed to getOffset() to get their offsets in the string table.
In this way, getOffset() needs to look up a hash table to get offsets
for given strings. This is a violation of "we look up the symbol table
(or a hash table) only once for each symbol" dogma of the new LLD's
design. Hash table lookup for long C++ mangled names is slow.
I eliminated that lookup in this patch.
In total, this patch improves link time of lld itself about 12%
(3.50 seconds -> 3.08 seconds.)
llvm-svn: 257017
The linker has to create __tls_get_addr, end and _end symbols.
Previously, these symbols were created in createSections().
But they are not actually related to creating output sections.
This patch moves code out of the function.
llvm-svn: 256441
Previously, this code was directly written in createSections()
function. This patch moves some code out of that function to a
new class.
llvm-svn: 256438
The number of output sections is usually limited, so the cost
of allocating them is not a bottleneck. This patch simplifies
the code by removing the allocators.
llvm-svn: 256437
OutputSectionBase already has virtual member functions.
This patch makes addSection() a virtual function to remove code
from Writer::createSections().
llvm-svn: 256436
This function was longer than 250 lines, which is way too long
in my own standard. This patch reduces the size. It is still
too long, but this patch should be toward the right direction.
llvm-svn: 256411
There are 3 symbol types that a .bc can provide during lto: defined,
undefined, common.
Defined and undefined symbols have already been refactored. I was
working on common and noticed that absolute symbols would become an
oddity: They would be the only symbol type present in a .o but not in
a.bc.
Looking a bit more, other than the special section number they were only
used for special rules for computing values. In that way they are
similar to TLS, and we don't have a DefinedTLS.
This patch deletes it. With it we have a reasonable rule of the thumb
for having a symbol kind: It exists if it has special resolution
semantics.
llvm-svn: 256383
Before this patch sections that go after relro sequence were placed at
the same memory page with relro ones. It caused segmentation fault on
freebsd.
Fixes PR25790.
Patch by George Rimar with some tweaks by myself.
llvm-svn: 256334
I am working on adding LTO support to the new ELF lld.
In order to do that, it will be necessary to represent defined and
undefined symbols that are not from ELF files. One way to do it is to
change the symbol hierarchy to look like
Defined : SymbolBody
Undefined : SymbolBody
DefinedElf<ELFT> : Defined
UndefinedElf<ELFT> : Undefined
Another option would be to use bogus Elf_Sym, but I think that is
getting a bit too hackish.
This patch does the Undefined/UndefinedElf. Split. The next one
will do the Defined/DefinedElf split.
llvm-svn: 256289
This relocation is similar to R_*_RELATIVE except that the value used in this relocation is the program address returned by the function, which takes no arguments, at the address of
the result of the corresponding R_*_RELATIVE relocation as specified in the processor-specific ABI. The purpose of this relocation to avoid name lookup for locally defined STT_GNU_IFUNC symbols at load-time.
More info can be found in ifunc.txt from https://sites.google.com/site/x32abi/documents.
Differential revision: http://reviews.llvm.org/D15235
llvm-svn: 256144
R_386_GOTOFF is calculated as S + A - GOT, where:
S - Represents the value of the symbol whose index resides in the relocation entry.
A - Represents the addend used to compute the value of the relocatable field.
GOT - Represents the address of the global offset table.
Differential revision: http://reviews.llvm.org/D15383
llvm-svn: 256143
MIPS .reginfo section provides information on the registers used by
the code in the object file. Linker should collect this information and
write .reginfo section in the output file. This section contains a union
of used registers masks taken from input .reginfo sections and final
value of the `_gp` symbol.
For details see the "Register Information" section in Chapter 4 in the
following document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
The patch implements .reginfo sections handling with a couple missed
features: a) it does not put output .reginfo section into the separate
REGINFO segment; b) it does not merge `ri_cprmask` masks from input
section. These features will be implemented later.
Differential Revision: http://reviews.llvm.org/D15669
llvm-svn: 256119
The patch configure ELF header flags for MIPS target. For now the flags
are hard coded. In fact they depends on ELF flags of input object files
and selected emulation.
Differential Revision: http://reviews.llvm.org/D15575
llvm-svn: 256089
@indntpoff is similar to @gotntpoff, but for use in position dependent code. While @gotntpoff resolves to GOT slot address relative to the
start of the GOT in the movl or addl instructions, @indntpoff resolves to the
absolute GOT slot address. ("ELF Handling For Thread-Local Storage", Ulrich Drepper).
Differential revision: http://reviews.llvm.org/D15494
llvm-svn: 255884
Previously, OffsetInBSS is -1 if it has no information about copy
relocation, 0 if it needs a copy relocation, and >0 if its offset
in BSS has been assigned. These flags were too subtle. This patch
adds a new flag, NeedsCopy, to carry information about whether
a shared symbol needs a copy relocation or not.
llvm-svn: 255865
The function was used only in Writer.cpp and did not depend on SymbolTable.
There is no reason to have that function in SymbolTable.cpp.
llvm-svn: 255850
List all sections removed by garbage collection. This option is only effective if garbage collection has been enabled via the `--gc-sections' option.
Differential revision: http://reviews.llvm.org/D15327
llvm-svn: 255235
"Ulrich Drepper, ELF Handling For Thread-Local Storage" (5.5 x86-x64 linker optimizations, http://www.akkadia.org/drepper/tls.pdf) shows how GD can be optimized to IE.
This patch implements the optimization.
Differential revision: http://reviews.llvm.org/D15000
llvm-svn: 254713
Combination of @tlsgd and @gottpoff at the same time leads to miss of R_X86_64_TPOFF64 dynamic relocation. Patch fixes that.
@tlsgd(%rip) - Allocate two contiguous entries in the GOT to hold a tls index
structure (for passing to tls get addr).
@gottpoff(%rip) - Allocate one GOT entry to hold a variable offset in initial TLS
block (relative to TLS block end, %fs:0).
The same situation can be observed for x86 (probably others too, not sure) with corresponding for that target relocations: @tlsgd, @gotntpoff.
Differential revision: http://reviews.llvm.org/D15105
llvm-svn: 254443
Fix was:
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
=>
uint32_t getLocalTlsIndexVA() { return Base::getVA() + LocalTlsIndexOff; }
Both works for my MSVS.
Original commit message:
[ELF] - Refactor of tls_index implementation for tls local dynamic model.
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254433
It failed buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/3782/steps/build/logs/stdio
Target.cpp
In file included from /home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/Target.cpp:20:
/home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/OutputSections.h:136:42: error: use of undeclared identifier 'getVA'
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
llvm-svn: 254432
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254428
Implements @tlsld (LD to LE) and @tlsgd (GD to LE) optimizations.
Patch does not implement the GD->IE case for @tlsgd.
Differential revision: http://reviews.llvm.org/D14870
llvm-svn: 254101
This patch implements next relocations:
R_386_TLS_LE - Negative offset relative to static TLS (GNU version).
R_386_TLS_LE_32 - Offset relative to static TLS block.
These ones are created when using next code sequences:
* @tpoff - The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
* @ntpoff Calculate the negative offset of the variable it is added to relative to the static TLS block.
The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
Information was found in Ulrich Drepper, ELF Handling For Thread-Local Storage, http://www.akkadia.org/drepper/tls.pdf, (6.2, p76)
Differential revision: http://reviews.llvm.org/D14930
llvm-svn: 254090
In the previous patch (r254003), I made the linker emit PT_GNU_STACK
unconditionally. But sometimes you want to have a control over the
presence of the segment. With this patch, you can omit the segment
by passing -z execstack option.
llvm-svn: 254039
Partial (-z relro) and full (-z relro, -z now) relro cases are implemented.
Partial relro:
The ELF sections are reordered so that the ELF internal data sections (.got, .dtors, etc.) precede the program's data sections (.data and .bss).
.got is readonly, .got.plt is still writeable.
Full relro:
Supports all the features of partial RELRO, .got.plt is also readonly.
Differential revision: http://reviews.llvm.org/D14218
llvm-svn: 253967
With this patch, lld creates PT_GNU_STACK segments only when all input
files have .note.GNU-stack sections. This is in line with other linkers
with a minor difference (we don't care about .note.GNU-stack rwx bits as
you can always remove .note.GNU-stack sections instead of setting x bit.)
At least, NetBSD loader does not understand PT_GNU_STACK segments and
reject any executables that have the section. This patch makes lld
compatible with such operating systems.
llvm-svn: 253797
PT_GNU_STACK is a entry in the elf file format which contains the access rights (read, write, execute) of the stack,
it is always generated now. By default stack is not executable in this implementation.
-z execstack can be used to make executable.
Differential revision: http://reviews.llvm.org/D14571
llvm-svn: 253145
This sections can be protected with relro after resolving relocations by dynamic linker.
Differential revision: http://reviews.llvm.org/D14567
llvm-svn: 253018
The MIPS target requires specific dynamic section entries to be defined.
* DT_MIPS_RLD_VERSION and DT_MIPS_FLAGS store predefined values.
* DT_MIPS_BASE_ADDRESS holds base VA.
* DT_MIPS_LOCAL_GOTNO holds the number of local GOT entries.
* DT_MIPS_SYMTABNO holds the number of .dynsym entries.
* DT_MIPS_GOTSYM holds the index of the .dynsym entry
which corresponds to the first entry of the global part of GOT.
* DT_MIPS_RLD_MAP holds the address of the reserved space in the data segment.
* DT_MIPS_PLTGOT points to the .got.plt section if it exists.
* DT_PLTGOT holds the address of the GOT section.
See "Dynamic Section" in Chapter 5 in the following document for detailed
description: ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
Differential revision: http://reviews.llvm.org/D14450
llvm-svn: 252857
This adds support for:
* Uniquing CIEs
* Dropping FDEs that point to dropped sections
It drops 657 488 bytes from the .eh_frame of a Release+Asserts clang.
The link time impact is smallish. Linking clang with a Release+Asserts
lld goes from 0.488064805 seconds to 0.504763060 seconds (1.034 X slower).
llvm-svn: 252790
GNU as can give it type SHT_PROGBITS or SHT_X86_64_UNWIND depending on
teh construct.
MC gives it type SHT_X86_64_UNWIND.
The linker has to canonicalize to one or the other so that there is only
one .eh_frame in the end.
llvm-svn: 252757
leaq symbol@tlsld(%rip), %rdi
call __tls_get_addr@plt
symbol@tlsld (R_X86_64_TLSLD) instructs the linker to generate a tls_index entry (two GOT slots) in the GOT for the entire module (shared object or executable) with an offset of 0. The symbol for this GOT entry doesn't matter (as long as it's either local to the module or null), and gold doesn't put a symbol in the dynamic R_X86_64_DTPMOD64 relocation for the GOT entry.
All other platforms defined in http://www.akkadia.org/drepper/tls.pdf except for Itanium use a similar model where global and local dynamic GOT entries take up 2 contiguous GOT slots, so we can handle this in a unified manner if we don't care about Itanium.
While scanning relocations we need to identify local dynamic relocations and generate a single tls_index entry in the GOT for the module and store the address of it somewhere so we can later statically resolve the offset for R_X86_64_TLSLD relocations. We also need to generate a R_X86_64_DTPMOD64 relocation in the RelaDyn relocation section.
This implementation is a bit hacky. It side steps the issue of GotSection and RelocationSection only handling SymbolBody entries by relying on a specific relocation type. The alternative to this seemed to be completely rewriting how GotSection and RelocationSection work, or using a different hacky signaling method.
llvm-svn: 252682
This is cleaner than computing relocations as if we had done it.
While at it, keep a single Phdr variable instead of multiple fields of it.
llvm-svn: 252352
This patch implements R_MIPS_GOT16 relocation for global symbols in order to
generate some entries in GOT. Only reserved and global entries are supported
for now. For the detailed description about GOT in MIPS, see "Global Offset
Table" in Chapter 5 in the followin document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
In addition, the platform specific symbol "_gp" is added, see "Global Data
Symbols" in Chapter 6 in the aforementioned document.
Differential revision: http://reviews.llvm.org/D14211
llvm-svn: 252275
For x86-64 the initial executable TLS block is placed directly before the
thread specific data register so compilers can directly access it via
R_X86_64_TPOFF32. Generate the correct (negative) offset for this case.
llvm-svn: 252131
This does not support TPOFF32 relocations to local symbols as the address calculations are separate. Support for this will be a separate patch.
llvm-svn: 251998
This is a case where there is inconsistency among ELF linkers:
* The spec says nothing special about empty sections.
* BFD ld removes them.
* Gold handles them like regular sections.
We were outputting them but sometimes ignoring them. This would create
odd looking outputs where a rw section could be in a ro segment for example.
The bfd way of doing things is also strange for the case where a symbol
points to the empty section.
Now we match gold and what seems to be the intention of the spec.
llvm-svn: 251988
It is required to fill up the GNU hash table section before its
finalize() method is called.
Differential Revision: http://reviews.llvm.org/D14196
llvm-svn: 251789
getFileOff functions defined for other classes return an offset
from beginning of the file. StringTableSection's getFileOff however
returned an offset from beginning of the section. That was confusing.
llvm-svn: 251192
This patch is an attempt to simplify assignAddresses function by splitting
it and using less variables. I tried to split the code to create PHDRs from
the code to assign addresses, but it didn't make this code simpler, so I
didn't do that in this patch.
llvm-svn: 251152
Section garbage collection is a feature to remove unused sections
from outputs. Unused sections are sections that cannot be reachable
from known GC-root symbols or sections. Naturally the feature is
implemented as a mark-sweep garbage collector.
In this patch, I added Live bit to InputSectionBase. If and only
if Live bit is on, the section will be written to the output.
Starting from GC-root symbols or sections, a new function, markLive(),
visits all reachable sections and sets their Live bits. Writer then
ignores sections whose Live bit is off, so that such sections are
excluded from the output.
This change has small negative impact on performance if you use
the feature because making sections means more work. The time to
link Clang changes from 0.356s to 0.386s, or +8%.
It reduces Clang size from 57,764,984 bytes to 55,296,600 bytes.
That is 4.3% reduction.
http://reviews.llvm.org/D13950
llvm-svn: 251043
This patch implements --hash-style command line switch.
* By default, or with "sysv" or "both" parameters, the linker generates
a standard ELF hash section.
* With "gnu" or "both", it produces a GNU-style hash section.
That section requires the symbols in the dynamic symbol table section, which
are referenced in the GNU hash section, to be placed after not hashed ones and
to be sorted to correspond the order of hash buckets in the GNU Hash section.
The division function, as well as estimations for the section's parameters,
are just the first rough attempt and the subjects for further adjustments.
Differential Revision: http://reviews.llvm.org/D13815
llvm-svn: 251000
* Move the responsibility to call SymbolBody::setDynamicSymbolTableIndex()
from the hash table to the dynamic symbol table.
* Hash table is not longer responsible for filling the dynamic symbol table.
* The final order of symbols of both symbol tables is set before writing
phase starts.
* Remove repeaded scan of the symbol table during writting SymbolTableSection.
Differential Revision: http://reviews.llvm.org/D13911
llvm-svn: 250864
The section header table index of the entry that is associated with the section name string table.
Differential Revision: http://reviews.llvm.org/D13904
llvm-svn: 250836
Target has supportsLazyRelocations() method which can switch lazy relocations on/off (currently all targets are OFF except x64 which is ON). So no any other targets are affected now.
Differential Revision: http://reviews.llvm.org/D13856?id=37726
llvm-svn: 250808
If one file is MIPS64EL, all files are MIPS64EL, and vice versa.
We do not have to look up MIPS-ness for each file. Currently we
do not support 64-bit MIPS, so the config value is always false.
llvm-svn: 250566
This patch is to use ELFT instead of Is64Bits to template OutputSection
and its subclasses. This increases code size slightly because it creates
two identical functions for some classes, but that's only 20 KB out of
33 MB, so it's negligible.
This is as per discussion with Rafael. He's not fan of the idea but OK
with this. We'll revisit later to this topic.
llvm-svn: 250466
String table is added to end of the file so that all the other sections
are finalized before string table. But we can just add section names to
the string table before calling finalize() on any section instead.
llvm-svn: 250463
If a section name is valid as a C identifier (which is rare because of
the leading '.'), linkers are expected to define __start_<secname> and
__stop_<secname> symbols. They are at beginning and end of the section,
respectively. This is not requested by the ELF standard, but GNU ld and
gold provide this feature.
llvm-svn: 250432
After some additional post-commit (post-revert) discussion and research, this
reverts, in part, r250205, so the ABI-recommended starting address can be used
on PPC64 (as is done by other linkers).
Also, this addresses the FIXME in ELF/Writer.cpp by making VAStart a
target-dependent property.
llvm-svn: 250378
If an argument for --entry is a number, that's not a symbol name but
an absolute address. If that's the case, the address is directly set
to ELF header's e_entry.
llvm-svn: 250334
Previously, we used input section names as output section names.
That resulted that we created lots of sections for comdat
or -f{function,data}-section sections.
This patch reduces the number of sections by dropping suffix from
all section names which start with ".text.", ".rodata.", ".data."
or ".bss.". GNU linker does this using the internal linker script,
but for LLD I chose to do that directly.
Interestingly, this makes the linker faster. Time to link Clang
is this.
Before:
real 0m0.537s
user 0m0.433s
sys 0m0.104s
After:
real 0m0.390s
user 0m0.268s
sys 0m0.120s
It make sense because previously we created 57659 sections now only 27.
llvm-svn: 250315
Suggested by Rafael in his review of r250100. As Rafael points out, this may
grow into a switch in the future, but regardless, calling this on files for
other architectures is unnecessary.
llvm-svn: 250209
This has turned out to be unnecessary, and while some ability to set VAStart
will be needed at some point, this is not clearly the right direction.
llvm-svn: 250205
The fix in r250109 to ensure a strict weak ordering in the section sorting was
a bit overzealous. We only use the NOBITS comparison if either A or B is a
NOBITS section. Otherwise, we fall through to the target-specific ranking
function. Failure to do this causes the sorting to fail in cases where, for
example, a .dynamic section happens to end up in between .got and .toc, etc. in
the initial ordering (.dynamic has a type SHT_DYNAMIC, compared to SHT_PROGBITS
or SHT_NOBITS).
llvm-svn: 250190
What was done:
1) .got.plt section is created for functions that requires PLT. .got.plt has 3 predefined empty entries now that are required for dynamic linker.
Also other new items created are configured to have correct jump to PLT[N].
2) PLT section now has PLT[0] entry, also others ones are configured to support PLT->GOT(.got.plt) calls.
3) Implemented .rel[a].plt sections (based on patch http://reviews.llvm.org/D13569).
4) Fixed plt relocations types (based on patch http://reviews.llvm.org/D13589).
NOTES:
The .plt.got zero entry is still empty now. According to ELF specification it should hold the address of the dynamic structure, referenced with the symbol
_DYNAMIC. The _DYNAMIC entry points to the .dynamic section which contains information used by the ELF interpreter to setup the binary.
Differential Revision: http://reviews.llvm.org/D13651
llvm-svn: 250169
Under PPC64 ELF v1 ABI, the symbols associated with each function name don't
point directly to the code in the .text section (or similar), but rather to a
function descriptor structure in a special data section named .opd. The
elements in the .opd structure include a pointer to the actual code, and a the
relevant TOC base value. Both of these are themselves set by relocations.
When we have a local call, we need the relevant relocation to refer directly to
the target code, not to the function-descriptor in the .opd section. Only when
we have a .plt stub do we care about the address of the .opd function
descriptor itself.
So we make a few changes here:
1. Always write .opd first, so that its relocated data values are available
for later use when writing the text sections. Record a pointer to the .opd
structure, and its corresponding buffer.
2. When processing a relative branch relocation under ppc64, if the
destination points into the .opd section, read the code pointer out of the
function descriptor structure and use that instead.
This this, I can link, and run, a dynamically-compiled "hello world"
application on big-Endian PPC64/Linux (ELF v1 ABI) using lld.
llvm-svn: 250122
As pointed out by Rui (post-commit review), we need to always return based on
the section type when the types differ to ensure a strict weak ordering.
llvm-svn: 250109
PPC64 has several special sections that are intended to be accessed from the
TOC base pointer. When a .got is present, the TOC base pointer is .got + 0x8000
(as specified by the ABI). Furthermore, the glibc startup code contains an
assumption that a 16-bit relocation can hold the offset from the TOC base value
to the beginning of the .toc section. Thus, we need to make sure that .toc
appears after .got. This much, at least, is required in practice. The other
PPC64 special sections (.toc, .toc1, .opd, etc.) should also be close by to
optimize access by smaller TOC-base-pointer offsets.
llvm-svn: 250100
This patch adds AsNeeded and IsUsed bool fields to SharedFile. AsNeeded bit
is set if the DSO is enclosed with --as-needed and --no-as-needed. IsUsed
bit is off by default. When we adds a symbol to the symbol table for dynamic
linking, we set its SharedFile's IsUsed bit.
If AsNeeded is set but IsUsed is not set, we don't want to write that
file's SO name to DT_NEEDED field.
http://reviews.llvm.org/D13579
llvm-svn: 249998
Previously, we reserved the first page for the program header, so no
sections would be written to very beginning of the output file.
FreeBSD requires .interp section be exist on the first page, so that
was not good.
This patch calculates the size of the program header and then assign
addresses to the sections. Now the first section is located next to
the program header. Because the first section is .interp, it's very
likely to be on the first page.
llvm-svn: 249957
SymbolTable was not a right place for initialization. We had to do that
because Driver didn't know what type of ELF objects are being handled.
We taught Driver that, so we can now move this code to Driver.
llvm-svn: 249904
SymbolTable was not a template class. Instead we had switch-case-based
type dispatch to call desired functions. We had to do that because
SymbolTable was created before we know what ELF type objects had been
passed.
Every time I tried to add a new function to the symbol table, I had to
define a dispatcher which consist of a single switch statement.
It also brought an restriction what the driver can do. For example,
we cannot add undefined symbols before any files are added to the symbol
table. That's because no symbols can be added until the symbol table
knows the ELF type, but when it knows about that, it's too late.
In this patch, the driver makes a decision on what ELF type objects
are being handled. Then the driver creates a SymbolTable object for
an appropriate ELF type.
http://reviews.llvm.org/D13544
llvm-svn: 249902
This reverts commit r249816.
It broke building llvm with lld:
$ ./bin/FileCheck
./bin/FileCheck: error while loading shared libraries: unexpected PLT reloc type 0x06
I think the only thing that is wrong with this patch is that it is too soon.
The plt we create (and its relocs) don't support lazy loading, so they have
to be relocated as ordinary dynamic relocations.
llvm-svn: 249835
.rela.plt contains list of elements in the PLT, which are liable to the relocation during the dynamic linking.
Differential Revision: http://reviews.llvm.org/D13569
llvm-svn: 249816
The required page alignment is different on different targets. On PowerPC, for
example, we need 64K pages (the loader won't set different permissions on a
finer granularity than that). I've set the existing targets to what I believe
to be the correct values, and have updated the regression tests accordingly.
llvm-svn: 249760
Reapply r249726 (and r249723), hopefully with the correct test fixups this time.
Original commit message:
Address a FIXME in ELF/Writer.cpp: Make VAStart a target-dependent property.
I've set the values for the existing targets to what I believe to be the
correct values, and updated the regression tests accordingly.
llvm-svn: 249752
Address a FIXME in ELF/Writer.cpp: Make VAStart a target-dependent property.
I've set the values for the existing targets to what I believe to be the
correct values, and updated the regression tests accordingly.
llvm-svn: 249723
Previously, output sections that are handled specially by the linker
(e.g. PLT or GOT) were created by Writer and passed to other classes
that need them. The problem was that because these special sections
are required by so many classes, the plumbing work became too much
burden.
This patch is to simply make them accessible from anywhere in the
linker to eliminate the plumbing work once and for all.
http://reviews.llvm.org/D13486
llvm-svn: 249590
The entries are added if there are "_init" or "_fini" entries in
the symbol table respectively. According to the behavior of ld,
entries are inserted even for undefined symbols.
Symbol names can be overridden by using -init and -fini command
line switches. If used, these switches neither add new symbol table
entries nor require those symbols to be resolved.
Differential Revision: http://reviews.llvm.org/D13385
llvm-svn: 249297
Add symbol specified with -u as undefined which may cause additional
object files from archives to be linked into the resulting binary.
Differential Revision: http://reviews.llvm.org/D13345
llvm-svn: 249295
Sort by:
ALLOC
ALLOC && NOBITS
ALLOC & EXEC
ALLOC & EXEC && NOBITS
ALLOC & WRITE
ALLOC & WRITE && NOBITS
<nothing> (ignoring NOBITS)
The dynamic section is finalized early because it adds strings to the dynamic string table, which comes before the dynamic table.
llvm-svn: 249071
The new name starts with a verb, and it does not imply that it errors
out and exit (it acutally can just emit a warning depending on settings.)
llvm-svn: 249016
Sort by:
ALLOC
ALLOC && NOBITS
ALLOC & EXEC
ALLOC & EXEC && NOBITS
ALLOC & WRITE
ALLOC & WRITE && NOBITS
<nothing> (ignoring NOBITS)
The dynamic section is finalized early because it adds strings to the dynamic string table, which comes before the dynamic table.
llvm-svn: 248845
Since FreeBSD 4.1, the kernel expects binaries to be marked with
ELFOSABI_FREEBSD in the ELF header to exec() them. LLD unconditionally
sets OSABI to ELF_OSABINONE, and everything linked with it won't run
on FreeBSD (unless explicitly rebranded).
Example:
% ./aarch64-hello
ELF binary type "0" not known.
zsh: exec format error: ./aarch64-hello
FreeBSD could be modified to accept ELF_OSABINONE, but that would break all
existing binaries, so the kernel needs to support both ABINONE and ABIFREEBSD.
I plan to push this change in FreeBSD one day, which, unfortunately, is
not today. This code patches lld so it sets the header field correctly.
For completeness, the rationale of this change is explained in the FreeBSD
commit message, and it's apparently to pleasee binutils maintainers at the time.
https://svnweb.freebsd.org/base?view=revision&revision=59342
Differential Revision: http://reviews.llvm.org/D13140
llvm-svn: 248554
This is just enough to get PLT working on 32 bit x86.
The idea behind using a virtual interface is that it should be easy to
convert any of the functions to template parameters if any turns out to be
performance critical.
llvm-svn: 248308
This is more consistent with OutputSection. This is also part of removing
the "Chunk" term from the ELF linker, since we just have input/output sections
and program headers.
llvm-svn: 248183
We used to sort the symbols at the very end, but we need to know the order
earlier so that we can create reference to them in the dynamic relocations.
Thanks to Igor Kudrin for pointing out the problem.
llvm-svn: 247911
Symbol table is now populated correctly, but some fields are missing,
they'll be added in the future. This patch also adds --discard-all
flag, which was the default behavior until now.
Differential Revision: http://reviews.llvm.org/D12874
llvm-svn: 247849
They are not fully functional yet, but this implements enough support for lld
itself to read them.
With that, delete the .so binary we were using for tests and start eating our
own dog food.
llvm-svn: 247487
For now it includes every symbol in the regular table. Since we don't
create dynamic relocations yet, we don't have a good way of knowing which
symbols are actually needed.
llvm-svn: 247365
With this patch we create a dynamic string table (it is allocated, unlike
the regular one) and the dynamic section has a DT_STRTAB pointing to it.
llvm-svn: 247155
The ELF spec says:
... if any reference to or definition of a name is a symbol with a
non-default visibility attribute, the visibility attribute must be
propagated to the resolving symbol in the linked object. If different
visibility attributes are specified for distinct references to or
definitions of a symbol, the most constraining visibility attribute
must be propagated to the resolving symbol in the linked object. The
attributes, ordered from least to most constraining, are:
STV_PROTECTED, STV_HIDDEN and STV_INTERNAL.
llvm-svn: 246603
Now that we print a symbol table and all symbol kinds are at least declared,
we can test all combinations that don't produce an error.
This also includes a few fixes to keep the test passing:
* Keep the strong symbol in a weak X strong pair
* Handle common symbols.
The common X common case will be finished in a followup patch.
llvm-svn: 246401
With this patch only the name is set. I will set the other fields shortly.
For now the table doesn't include local symbols. This is equivalent to using
--discard-all with gnu ld. This is OK for now since the symbols are not
needed for execution and for testing symbol resolution we only need the
global symbols.
llvm-svn: 245044
With OutputSection being a virtual interface, each concrete OutputSection
handles only one type of chunk and we don't need a base Chunk class.
So for we have a class that handles input sections and one that handles
the string table, but this extends naturally for other outputs (symbol table,
merging of SHF_MERGE sections, etc.).
llvm-svn: 244972
We were creating the string table in a completely ad hoc way. Now the
string table is an output section and gets its output offset set just like
any other section.
This opens the way for other linker created sections like the symbol table.
llvm-svn: 244969
This is a bit more c++ code, but:
* It is less machine code: lld's text is 44688 bytes smaller.
* It should be a bit more efficient in the non native endian case.
* It should be a bit more efficient on architectures with slow unaligned access.
llvm-svn: 244934
Various parameters are passed implicitly using Config global variable
already. Output file path is no different from others, so there was no
special reason to handle that differnetly.
This patch changes the signature of writeResult(SymbolTable *, StringRef)
to writeResult(SymbolTable *).
llvm-svn: 244180
We are using Writer more like a function instead of a class.
This patch makes it a function to simplify the interface.
All details of Writer class is now hidden from other parts of the linker.
llvm-svn: 244169
The others we have in sight are
* common symbols.
* entries in SHF_MERGE sections.
They will have a substantially different treatment. It is not clear if it is
worth it putting them all in a single list just to dispatch based on the kind on
the other side.
I hope to implement common symbols soon, and then we will be in a position
to have a concrete discussion. For now this is simpler for the the implemented
features.
llvm-svn: 244042
When we were using a std::sort over all the chunks we needed to put them in a
single storage.
Now that we just iterate over them and use a map to find the output section,
we can avoid allocating the temporary storage.
llvm-svn: 243980
This is a direct port of the new PE/COFF linker to ELF.
It can take a single object file and generate a valid executable that executes at the first byte in the text section.
llvm-svn: 242088
Rafael Espindola