This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
Summary:
This patch fixes the next situation. On Windows clang-cl makes no stub before
the main function, so the main function is located exactly on module entry
point. May be it is the same on other platforms. So consider the following
sequence:
- set a breakpoint on main and stop there;
- try to evaluate expression, which requires a code execution on the debuggee
side. Such an execution always returns to the module entry, and the plan waits
for it there;
- the plan understands that it is complete now and removes its breakpoint. But
the breakpoint site is still there, because we also have a breakpoint on
entry;
- StopInfo analyzes a situation. It sees that we have stopped on the breakpoint
site, and it sees that the breakpoint site has owners, and no one logical
breakpoint is internal (because the plan is already completed and it have
removed its breakpoint);
- StopInfo thinks that it's a user breakpoint and skips it to avoid recursive
computations;
- the program continues.
So in this situation the program continues without a stop right after
the expression evaluation. To avoid this an additional check that
the plan was completed was added.
Reviewers: jingham, zturner, boris.ulasevich
Reviewed by: jingham
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53761
llvm-svn: 347974
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.
This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.
Differential revision: https://reviews.llvm.org/D54221
llvm-svn: 346920
Summary:
There are 2 changes here:
1. Use system sed instead of the sed found in the user's path. This
fixes this script in the case the user has gnu-sed in their $PATH before
bsd sed since `-i ''` isn't compatible and you need `-i` instead.
2. `set -e` in this script so it fails as soon as one of these commands
fail instead of throwing errors for each file if they fail
Since this is only ran on macOS, and we're already using this
absolute path below, this seems like a safe addition
Reviewers: kastiglione, beanz
Reviewed By: kastiglione
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49776
llvm-svn: 346099
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345686
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345678
Fix llvm.org/pr39054:
- Register _lldb as a built-in module during initialization of script interpreter,
- Reverse the order of imports in __init__.py: first try to import by absolute name, which will find the built-in module in the context of lldb (and other hosts that embed liblldb), then try relative import, in case the module is being imported from Python interpreter.
This works for SWIG>=3.0.11; before that, SWIG did not support custom module import code.
Differential revision: https://reviews.llvm.org/D52404
llvm-svn: 344474
LC_BUILD_VERSION load command handling - this
commit is a combination of patches by Adrian
Prantl and myself. llvm::Triple::BridgeOS
isn't defined yet, so all references to that
are currently commented out.
Also update Xcode project file to build the
NativePDB etc plugins.
<rdar://problem/43353615>
llvm-svn: 344209
This patch teaches lldb to detect when there are missing frames in a
backtrace due to a sequence of tail calls, and to fill in the backtrace
with artificial tail call frames when this happens. This is only done
when the execution history can be determined from the call graph and
from the return PC addresses of calls on the stack. Ambiguous sequences
of tail calls (e.g anything involving tail calls and recursion) are
detected and ignored.
Depends on D49887.
Differential Revision: https://reviews.llvm.org/D50478
llvm-svn: 343900
This change allows you to write a new breakpoint type where the
logic for setting breakpoints is determined by a Python callback
written using the SB API's.
Differential Revision: https://reviews.llvm.org/D51830
llvm-svn: 342185
Summary:
This patch adds a framework for adding descriptions to the command completions we provide.
It also adds descriptions for completed top-level commands so that we can test this code.
Completions are in general supposed to be displayed alongside the completion itself. The descriptions
can be used to provide additional information about the completion to the user. Examples for descriptions
are function signatures when completing function calls in the expression command or the binary name
when providing completion for a symbol.
There is still some boilerplate code from the old completion API left in LLDB (mostly because the respective
APIs are reused for non-completion related purposes, so the CompletionRequest doesn't make sense to be
used), so that's why I still had to change some function signatures. Also, as the old API only passes around a
list of matches, and the descriptions are for these functions just another list, I had to add some code that
essentially just ensures that both lists are always the same side (e.g. all the manual calls to
`descriptions->AddString(X)` below a `matches->AddString(Y)` call).
The initial command descriptions that come with this patch are just reusing the existing
short help that is already added in LLDB.
An example completion with descriptions looks like this:
```
(lldb) pl
Available completions:
platform -- Commands to manage and create platforms.
plugin -- Commands for managing LLDB plugins.
```
Reviewers: #lldb, jingham
Reviewed By: #lldb, jingham
Subscribers: jingham, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D51175
llvm-svn: 342181
Summary:
Swig wraps C++ code into SWIG_PYTHON_THREAD_BEGIN_ALLOW; ... SWIG_PYTHON_THREAD_END_ALLOW;
Thus, LLDB crashes with "Fatal Python error: Python memory allocator called without holding the GIL" when calls an lldb_SB***___str__ function.
Reviewers: clayborg
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D51569
llvm-svn: 341482
This patch extends the SBAPI to allow for setting a breakpoint not
only at a specific line, but also at a specific (minimum) column. When
a column is specified, it will try to find an exact match or the
closest match on the same line that comes after the specified
location.
Differential Revision: https://reviews.llvm.org/D51461
llvm-svn: 341078
GNU sed and BSD sed have a different command-line syntax for in-place
editing, and the current form of the script would only work with BSD
sed. The easiest way to get cross-platform behavior is to specify a
backup suffix and then just delete the backup file at the end. (BSD sed
is the default on macOS, but it's possible to acquire GNU coreutils and
have your `sed` be GNU sed even on macOS; I'm aware it's not officially
supported in any capacity, but it's easy enough to support here.)
An alternative would be using `perl -p -i -e` instead of `sed -i`, but I
figured it was best to make the minimal working change.
Differential Revision: https://reviews.llvm.org/D51374
llvm-svn: 340885
Summary:
The new API appends an image search path to the
target's path mapping list.
Reviewers: aprantl, clayborg, labath
Reviewed By: aprantl
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D49739
llvm-svn: 339175
This reverts r338154. This change is actually unnecessary, as the CMake
bug I referred to was actually not a bug but a misunderstanding of
CMake.
Original Differential Revision: https://reviews.llvm.org/D49888
llvm-svn: 338178
Summary:
This patch adds the possibility to specify an exit code when calling quit.
We accept any int, even though it depends on the user what happens if the int is
out of the range of what the operating system supports as exit codes.
Fixes rdar://problem/38452312
Reviewers: davide, jingham, clayborg
Reviewed By: jingham
Subscribers: clayborg, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D48659
llvm-svn: 336824
Summary:
This change fixes one issue with `lldb.command`, and also reduces the implementation.
The fix: a command function's docstring was not shown when running `help <command_name>`. This is because the docstring attached the source function is not propagated to the decorated function (`f.__call__`). By returning the original function, the docstring will be properly displayed by `help`.
Also with this change, the command name is assumed to be the function's name, but can still be explicitly defined as previously.
Additionally, the implementation was updated to:
* Remove inner class
* Remove use of `inspect` module
* Remove `*args` and `**kwargs`
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: keith, xiaobai, lldb-commits
Differential Revision: https://reviews.llvm.org/D48658
llvm-svn: 336287
Summary: The new API allows to find a list of compile units related to target/module.
Reviewers: aprantl, clayborg
Reviewed By: aprantl
Subscribers: jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D48801
llvm-svn: 336200
that I used to sort it to scripts/sort-pbxproj.rb. It turns
out that Xcode will perturb the order of the file lists
every time we add a file, following its own logic, and unfortunately
we'll still end up with lots of merge conflicts when that tries
to merge to the github swift repositories. We talked this over
and we're going to keep it in a canonical state by running this
script over it when Xcode tries to reorder it.
llvm-svn: 336158
This provides an efficient (at least on Posix platforms) way to offload to the
target process the search & loading of a library when all we have are the
library name and a set of potential candidate locations.
<rdar://problem/40905971>
llvm-svn: 335912
This change allows to make AddressClass strongly typed enum and not to have issues with old versions of SWIG that don't support enum classes.
llvm-svn: 335710
I've been using this script on a couple machines and it seems to work
so I'm putting it out there, maybe other people will find it useful.
It is strongly inspired from a similar script in the delve project.
llvm-svn: 334743
There was no way to find out what's wrong if SBProcess SBTarget::LoadCore(const char *core_file) failed.
Additionally, the implementation was unconditionally setting sb_process, so it wasn't even possible to check if the return SBProcess is valid.
This change adds a new overload which surfaces the errors and also returns a valid SBProcess only if the core load succeeds:
SBProcess SBTarget::LoadCore(const char *core_file, SBError &error);
Differential Revision: https://reviews.llvm.org/D48049
llvm-svn: 334439
Instead of assuming that SWIG generated files (e.g. lldb.py) will live
in scripts, we should set it to $LLDB_PYTHON_TARGET_DIR. This variable is set to
scripts, except when building LLDB.framework when it is set to
LLDB_FRAMEWORK_DIR.
Differential Revision: https://reviews.llvm.org/D47742
llvm-svn: 333968
Use proper cmake techniques to detect where the libedit package resides.
This allows for the use of libedit from an alternative location which is
needed for supporting cross-compilation.
llvm-svn: 333041
LLDB.framework to point to the build directory where it is expected by
the top-level CMakeLists.txt.
This should be a no-op in any other configurations.
rdar://problem/38005302
llvm-svn: 326743
Summary:
This adds a SBDebugger::GetBuildConfiguration static function, which
returns a SBStructuredData describing the the build parameters of
liblldb. Right now, it just contains one entry: whether we were built
with XML support.
I use the new functionality to skip a test which requires XML support,
but concievably the new function could be useful to other liblldb
clients as well (making sure the library supports the feature they are
about to use).
Reviewers: zturner, jingham, clayborg, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43333
llvm-svn: 325504
an empty Python string object when it reads a 0-length
string out of memory (and a successful SBError object).
<rdar://problem/26186692>
llvm-svn: 321338
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D39128
<rdar://problem/34870417>
llvm-svn: 317182
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D38829
llvm-svn: 317180
Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
The core of this change is the new CommandInterpreter::m_command_state, which
models the state transitions for interactive commands, including an
"interrupted" state transition.
In general, command interruption requires cooperation from the code executing
the command, which needs to poll for interruption requests through
CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs was
likely the longest blocking part. (ex. target modules dump symtab on a
complex binary could take 10+ minutes)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 313904
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
Implement SBProcessInfo to wrap lldb_private::ProcessInstanceInfo,
and add SBProcess::GetProcessInfo() to retrieve info like parent ID,
group ID, user ID etc. from a live process.
Differential Revision: https://reviews.llvm.org/D35881
llvm-svn: 309664
- Don't do any checks of the current SCM repository if the
llvm repositories are already there. Useful for bots.
- When symlinking, remove old symlinks.
- Support loading build-script as a library, not necessarily
under Xcode.
- Stringify args before passing them to subprocess.
llvm-svn: 309631
This adds an explicit step for processing the headers and restructures how the framework bundles are constructed. This should make the frameworks more reliably constructed.
llvm-svn: 309024
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
This makes automatic checkout work even in situations where the
current repository can't be determined, such as in the case of a
Git tag.
llvm-svn: 306460
PyObject_CallFunction returns a PyObject which needs to be
decref'ed when it is no longer needed.
Patch by David Luyer
Differential Revision: https://reviews.llvm.org/D33740
llvm-svn: 305873
The simple module import logic was not sufficient for our distribution
model of lldb, which is without the _lldb.pyd file (normally that would
be a symlink to the shared library, but symlinks are not really a thing
on windows).
With the older swigs it worked (loading of the python scripting
machinery from within lldb) because the normal swig import logic
contained a last-ditch import of a global module _lldb (which is defined
when you run python from lldb). Add back the last-ditch import to our
custom import logic as well.
llvm-svn: 305461
Summary:
- Added API to access data types
-- integer, double, array, string, boolean and dictionary data types
-- Earlier user had to parse through the string output to get these
values
- Added Test cases for API testing
- Added new StructuredDataType enum in public include file
-- Replaced locally-defined enum in StructuredData.h with this new
one
-- Modified other internal files using this locally-defined enum
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, lldb-commits
Reviewed By: clayborg
Subscribers: labath
Differential Revision: https://reviews.llvm.org/D33434
llvm-svn: 304138
Summary:
A change in swig 3.0.9 has caused it to generate modules incompatible
with us using them as __init__.py (bug #769). Swig 3.0.11 adds a setting to help
fix this problem, so use that. Support for older versions of swig remains
unaffected.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33409
llvm-svn: 303627
The find function in repo.py calls sys.exit on error. Without this import that
call to exit will fail, masking the actual error message. This patch fixes that.
llvm-svn: 302584
Summary:
This patch introduces new SB APIs for tracing support
inside LLDB. The idea is to gather trace data from
LLDB and provide it through this APIs to external
tools integrating with LLDB. These tools will be
responsible for interpreting and presenting the
trace data to their users.
The patch implements the following new SB APIs ->
-> StartTrace - starts tracing with given parameters
-> StopTrace - stops tracing.
-> GetTraceData - read the trace data .
-> GetMetaData - read the meta data assosciated with the trace.
-> GetTraceConfig - read the trace configuration
Tracing is associated with a user_id that is returned
by the StartTrace API and this id needs to be used
for accessing the trace data and also Stopping
the trace. The user_id itself may map to tracing
the complete process or just an individual thread.
The APIs require an additional thread parameter
when the user of these APIs wishes to perform
thread specific manipulations on the tracing instances.
The patch also includes the corresponding
python wrappers for the C++ based APIs.
Reviewers: k8stone, lldb-commits, clayborg
Reviewed By: clayborg
Subscribers: jingham, mgorny
Differential Revision: https://reviews.llvm.org/D29581
llvm-svn: 301389
We currently display a list of all minimal cycles, but it's
useful to be able to see the big picture impact of these cycles
by merging them all together into groups of interconnected
components.
Because the cycle discovery algorithm only considers "minimal"
cycles, it discards all information for dependencies which are
not considered part of the minimal cycle. So all we know is that
the components of each island definitely all depend on each other
but it's still possible that there are hidden dependencies due
to transitive includes.
The cycle list should still be the authoritative reference for
deciding where the easiest places to break cycles are, though.
llvm-svn: 298530
When passing --discover-cycles and --show-counts, it displays
the number of dependencies between each hop of the cycle,
and sorts by the sum. Dependencies at the top of the list
should be the easiest to break.
llvm-svn: 298455
This analyzes the dependency graph and computes all minimal
cycles. Equivalent cycles that differ only by rotation are
excluded, as are cycles that are "super-cycles" of other
smaller cycles. For example, if we discover the cycle
A -> C -> A, and then later A -> B -> C -> D -> A, this latter
cycle is not considered. Thus, it is possible that after
eliminating some cycles, new ones will appear. However,
this is the only way to make the algorithm terminate in
a reasonable amount of time.
llvm-svn: 298324
1) Looks in Plugins and clang
2) Adds a mode to display the deps sorted by the number of times
the deps occurs in a particular project
llvm-svn: 297036
Some repos are not git repos, so git is expected
to fail. These errors should not go to stderr,
because Xcode interprets them as failures.
llvm-svn: 296924
LLDB has many branches in a variety of repositories.
The build-script.py file is subtly different for each set.
This is unnecessary and causes merge headaches.
This patch makes build-llvm.py consult a directory full
of .json files, each one of which matches a particular
branch using a regular expression.
This update to the patch introduces a FALLBACK file
whose contents take precedence if the current branch
could not be identified. If the current branch could be
identified, FALLBACK is updated, allowing the user to
e.g. cut branches off of known branches and still have
the automatic checkout mechanism work.
It also documents all of this.
Differential revision: https://reviews.llvm.org/D30275
llvm-svn: 295922
LLDB has many branches in a variety of repositories.
The build-script.py file is subtly different for each set.
This is unnecessary and causes merge headaches.
This patch makes build-llvm.py consult a directory full
of .json files, each one of which matches a particular
branch using a regular expression.
Differential revision: https://reviews.llvm.org/D30275
llvm-svn: 295897
Summary:
The current version of LLDB installs six.py into global python library directory. This approach produces conflicts downstream with distribution's py-six copy.
Introduce new configure option LLDB_USE_SYSTEM_SIX (disabled by default). Once specified as TRUE, six.py won't be installed to Python's directory.
Add new option in finishSwigWrapperClasses.py, namely --useSystemSix.
Sponsored by <The NetBSD Foundation>
Reviewers: mgorny, emaste, clayborg, joerg, labath
Reviewed By: labath
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29405
llvm-svn: 294071
print the path being requested.
Change the GetInfoItemByPathAsString docuemtnation in
the .i file to use docstring instead of autodoc so
the function signature is included in the python
help.
<rdar://problem/29999567>
llvm-svn: 293858
Pavel Labath